Make some of the macro names according to the names
given in the datasheet of the adis16209 driver and
have slight indentation in field definitions to make
them clearly different from the register addresses.
Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---
Changes in v4
-Have slight indentation in field definitions.
drivers/staging/iio/accel/adis16209.c | 48 +++++++++++++++++------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/iio/accel/adis16209.c b/drivers/staging/iio/accel/adis16209.c
index eb5c878..19636e2 100644
--- a/drivers/staging/iio/accel/adis16209.c
+++ b/drivers/staging/iio/accel/adis16209.c
@@ -68,21 +68,21 @@
#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
-#define ADIS16209_STAT_REG 0x3C
-#define ADIS16209_STAT_ALARM2 BIT(9)
-#define ADIS16209_STAT_ALARM1 BIT(8)
-#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5
-#define ADIS16209_STAT_SPI_FAIL_BIT 3
-#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
+#define ADIS16209_DIAG_STAT_REG 0x3C
+#define ADIS16209_DIAG_STAT_ALARM2 BIT(9)
+#define ADIS16209_DIAG_STAT_ALARM1 BIT(8)
+#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5
+#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT 3
+#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT 2
/* Power supply above 3.625 V */
-#define ADIS16209_STAT_POWER_HIGH_BIT 1
+#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
-#define ADIS16209_STAT_POWER_LOW_BIT 0
+#define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0
-#define ADIS16209_CMD_REG 0x3E
-#define ADIS16209_CMD_SW_RESET BIT(7)
-#define ADIS16209_CMD_CLEAR_STAT BIT(4)
-#define ADIS16209_CMD_FACTORY_CAL BIT(1)
+#define ADIS16209_GLOB_CMD_REG 0x3E
+#define ADIS16209_GLOB_CMD_SW_RESET BIT(7)
+#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4)
+#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1)
#define ADIS16209_ERROR_ACTIVE BIT(14)
@@ -238,29 +238,29 @@ static const struct iio_info adis16209_info = {
};
static const char * const adis16209_status_error_msgs[] = {
- [ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
- [ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
- [ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
- [ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
- [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+ [ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
+ [ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};
static const struct adis_data adis16209_data = {
.read_delay = 30,
.msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
- .glob_cmd_reg = ADIS16209_CMD_REG,
- .diag_stat_reg = ADIS16209_STAT_REG,
+ .glob_cmd_reg = ADIS16209_GLOB_CMD_REG,
+ .diag_stat_reg = ADIS16209_DIAG_STAT_REG,
.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
.self_test_no_autoclear = true,
.startup_delay = ADIS16209_STARTUP_DELAY_MS,
.status_error_msgs = adis16209_status_error_msgs,
- .status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
- BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
- BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
- BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
- BIT(ADIS16209_STAT_POWER_LOW_BIT),
+ .status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
+ BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
};
static int adis16209_probe(struct spi_device *spi)
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
