On Thu, Mar 1, 2018 at 1:27 PM, Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote:
> Oh, this only works for csi ports that have pinctrl in their csi port
> node, like:
>
> &ipu1_csi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_ipu1_csi0>;
> };
This is the case for imx6qdl-sabresd.dtsi and even in this case
devm_pinctrl_get_select_default() fails
> pinctrl would have to be moved out of the csi port nodes, for example
> into their parent ipu nodes, or maybe more correctly, into the video mux
> nodes in each device tree.
Tried it like this:
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -154,12 +154,9 @@
};
&ipu1_csi0_mux_from_parallel_sensor {
- remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_csi0>;
+ remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
};
&mipi_csi {
but still get the devm_pinctrl_get_select_default() failure.
I was not able to change the dts so that
devm_pinctrl_get_select_default() succeeds.
If you agree I can send the following change:
diff --git a/drivers/staging/media/imx/imx-media-csi.c
b/drivers/staging/media/imx/imx-media-csi.c
index 5a195f8..c40f786 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -1797,11 +1797,8 @@ static int imx_csi_probe(struct platform_device *pdev)
*/
priv->dev->of_node = pdata->of_node;
pinctrl = devm_pinctrl_get_select_default(priv->dev);
- if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(priv->vdev);
- goto free;
- }
-
+ if (IS_ERR(pinctrl))
+ dev_dbg(priv->dev, "pintrl_get_select_default() failed\n");
ret = v4l2_async_register_subdev(&priv->sd);
if (ret)
goto free;
So that the error is ignored and we still can change the pinctrl values via dts.
What do you think?
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
