Hi Ajay,
Even I cannot locate something in Documentation/CodingStyle related to single
line comment, I prefer to use:
/* comment */
instead of:
/*
* comment
*/
Do as you wish!
Thank you,
Claudiu
On 14.02.2018 13:10, Ajay Singh wrote:
> diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
> index 8f71a60..5d0de4e 100644
> --- a/drivers/staging/wilc1000/wilc_spi.c
> +++ b/drivers/staging/wilc1000/wilc_spi.c
> @@ -422,9 +422,9 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> return N_FAIL;
> }
>
> - /**
> + /*
> * Command/Control response
> - **/
> + */
> if (cmd == CMD_RESET ||
> cmd == CMD_TERMINATE ||
> cmd == CMD_REPEAT) {
> @@ -443,9 +443,9 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> return N_FAIL;
> }
>
> - /**
> + /*
> * State response
> - **/
> + */
> rsp = rb[rix++];
> if (rsp != 0x00) {
> dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
> @@ -458,12 +458,15 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> int retry;
> /* u16 crc1, crc2; */
> u8 crc[2];
> - /**
> + /*
> * Data Respnose header
> - **/
> + */
> retry = 100;
> do {
> - /* ensure there is room in buffer later to read data and crc */
> + /*
> + * ensure there is room in buffer later
> + * to read data and crc
> + */
> if (rix < len2) {
> rsp = rb[rix++];
> } else {
> @@ -481,9 +484,9 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> }
>
> if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ) {
> - /**
> + /*
> * Read bytes
> - **/
> + */
> if ((rix + 3) < len2) {
> b[0] = rb[rix++];
> b[1] = rb[rix++];
> @@ -496,9 +499,9 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> }
>
> if (!g_spi.crc_off) {
> - /**
> + /*
> * Read Crc
> - **/
> + */
> if ((rix + 1) < len2) {
> crc[0] = rb[rix++];
> crc[1] = rb[rix++];
> @@ -524,18 +527,18 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> else
> nbytes = DATA_PKT_SZ - ix;
>
> - /**
> + /*
> * Read bytes
> - **/
> + */
> if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
> dev_err(&spi->dev, "Failed data block read, bus error...\n");
> result = N_FAIL;
> goto _error_;
> }
>
> - /**
> + /*
> * Read Crc
> - **/
> + */
> if (!g_spi.crc_off) {
> if (wilc_spi_rx(wilc, crc, 2)) {
> dev_err(&spi->dev, "Failed data block crc read, bus error...\n");
> @@ -548,7 +551,10 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> sz -= nbytes;
> }
>
> - /* if any data in left unread, then read the rest using normal DMA code.*/
> + /*
> + * if any data in left unread,
> + * then read the rest using normal DMA code.
> + */
> while (sz > 0) {
> int nbytes;
>
> @@ -557,14 +563,14 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> else
> nbytes = DATA_PKT_SZ;
>
> - /**
> + /*
> * read data response only on the next DMA cycles not
> * the first DMA since data response header is already
> * handled above for the first DMA.
> - **/
> - /**
> + */
> + /*
> * Data Respnose header
> - **/
> + */
> retry = 10;
> do {
> if (wilc_spi_rx(wilc, &rsp, 1)) {
> @@ -579,18 +585,18 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
> if (result == N_FAIL)
> break;
>
> - /**
> + /*
> * Read bytes
> - **/
> + */
> if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
> dev_err(&spi->dev, "Failed data block read, bus error...\n");
> result = N_FAIL;
> break;
> }
>
> - /**
> + /*
> * Read Crc
> - **/
> + */
> if (!g_spi.crc_off) {
> if (wilc_spi_rx(wilc, crc, 2)) {
> dev_err(&spi->dev, "Failed data block crc read, bus error...\n");
> @@ -616,9 +622,9 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
> u8 cmd, order, crc[2] = {0};
> /* u8 rsp; */
>
> - /**
> - * Data
> - **/
> + /*
> + * Data
> + */
> ix = 0;
> do {
> if (sz <= DATA_PKT_SZ)
> @@ -626,9 +632,9 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
> else
> nbytes = DATA_PKT_SZ;
>
> - /**
> - * Write command
> - **/
> + /*
> + * Write command
> + */
> cmd = 0xf0;
> if (ix == 0) {
> if (sz <= DATA_PKT_SZ)
> @@ -650,9 +656,9 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
> break;
> }
>
> - /**
> - * Write data
> - **/
> + /*
> + * Write data
> + */
> if (wilc_spi_tx(wilc, &b[ix], nbytes)) {
> dev_err(&spi->dev,
> "Failed data block write, bus error...\n");
> @@ -660,9 +666,9 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
> break;
> }
>
> - /**
> - * Write Crc
> - **/
> + /*
> + * Write Crc
> + */
> if (!g_spi.crc_off) {
> if (wilc_spi_tx(wilc, crc, 2)) {
> dev_err(&spi->dev, "Failed data block crc write, bus error...\n");
> @@ -671,9 +677,9 @@ static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
> }
> }
>
> - /**
> - * No need to wait for response
> - **/
> + /*
> + * No need to wait for response
> + */
> ix += nbytes;
> sz -= nbytes;
> } while (sz);
> @@ -733,7 +739,7 @@ static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
>
> data = cpu_to_le32(data);
> if (addr < 0x30) {
> - /* Clockless register*/
> + /* Clockless register */
> cmd = CMD_INTERNAL_WRITE;
> clockless = 1;
> }
> @@ -751,9 +757,9 @@ static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
> int result;
> u8 cmd = CMD_DMA_EXT_WRITE;
>
> - /**
> - * has to be greated than 4
> - **/
> + /*
> + * has to be greated than 4
> + */
> if (size <= 4)
> return 0;
>
> @@ -764,9 +770,9 @@ static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
> return 0;
> }
>
> - /**
> - * Data
> - **/
> + /*
> + * Data
> + */
> result = spi_data_write(wilc, buf, size);
> if (result != N_OK)
> dev_err(&spi->dev, "Failed block data write...\n");
> @@ -783,7 +789,7 @@ static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
>
> if (addr < 0x30) {
> /* dev_err(&spi->dev, "***** read addr %d\n\n", addr); */
> - /* Clockless register*/
> + /* Clockless register */
> cmd = CMD_INTERNAL_READ;
> clockless = 1;
> }
> @@ -825,9 +831,9 @@ static int wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
>
> static int _wilc_spi_deinit(struct wilc *wilc)
> {
> - /**
> - * TODO:
> - **/
> + /*
> + * TODO:
> + */
> return 1;
> }
>
> @@ -849,15 +855,19 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
>
> memset(&g_spi, 0, sizeof(struct wilc_spi));
>
> - /**
> - * configure protocol
> - **/
> + /*
> + * configure protocol
> + */
> g_spi.crc_off = 0;
>
> - /* TODO: We can remove the CRC trials if there is a definite way to reset */
> + /*
> + * TODO: We can remove the CRC trials if there is a definite
> + * way to reset
> + */
> /* the SPI to it's initial value. */
> if (!spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, ®)) {
> - /* Read failed. Try with CRC off. This might happen when module
> + /*
> + * Read failed. Try with CRC off. This might happen when module
> * is removed but chip isn't reset
> */
> g_spi.crc_off = 1;
> @@ -870,7 +880,7 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
> }
> }
> if (g_spi.crc_off == 0) {
> - reg &= ~0xc; /* disable crc checking */
> + reg &= ~0xc; /* disable crc checking */
> reg &= ~0x70;
> reg |= (0x5 << 4);
> if (!spi_internal_write(wilc, WILC_SPI_PROTOCOL_OFFSET, reg)) {
> @@ -880,9 +890,9 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
> g_spi.crc_off = 1;
> }
>
> - /**
> - * make sure can read back chip id correctly
> - **/
> + /*
> + * make sure can read back chip id correctly
> + */
> if (!wilc_spi_read_reg(wilc, 0x1000, &chipid)) {
> dev_err(&spi->dev, "Fail cmd read chip id...\n");
> return 0;
> @@ -994,7 +1004,10 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
>
> ret = 1;
> for (i = 0; i < g_spi.nint; i++) {
> - /* No matter what you write 1 or 0, it will clear interrupt. */
> + /*
> + * No matter what you write 1 or 0,
> + * it will clear interrupt.
> + */
> if (flags & 1)
> ret = wilc_spi_write_reg(wilc, 0x10c8 + i * 4, 1);
> if (!ret)
> @@ -1036,9 +1049,9 @@ static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
> }
>
> if ((val & EN_VMM) == EN_VMM) {
> - /**
> - * enable vmm transfer.
> - **/
> + /*
> + * enable vmm transfer.
> + */
> ret = wilc_spi_write_reg(wilc,
> WILC_VMM_CORE_CTL, 1);
> if (!ret) {
> @@ -1065,9 +1078,9 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
>
> g_spi.nint = nint;
>
> - /**
> - * interrupt pin mux select
> - **/
> + /*
> + * interrupt pin mux select
> + */
> ret = wilc_spi_read_reg(wilc, WILC_PIN_MUX_0, ®);
> if (!ret) {
> dev_err(&spi->dev, "Failed read reg (%08x)...\n",
> @@ -1082,9 +1095,9 @@ static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
> return 0;
> }
>
> - /**
> - * interrupt enable
> - **/
> + /*
> + * interrupt enable
> + */
> ret = wilc_spi_read_reg(wilc, WILC_INTR_ENABLE, ®);
> if (!ret) {
> dev_err(&spi->dev, "Failed read reg (%08x)...\n",
> -- 2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
