On Sat, 2017-12-02 at 22:05 +0100, Tomas Marek wrote:
> This patch fix several brace on next line, braces not necessary, space
> around =/<, and space before/after open/close parenthesis coding style
> errors find by checkpatch in pi433_if.c.
>
> Signed-off-by: Tomas Marek <marek_tomas@xxxxxxxxxx>
> ---
> drivers/staging/pi433/pi433_if.c | 130 ++++++++++++---------------------------
> 1 file changed, 40 insertions(+), 90 deletions(-)
>
> diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
> index 2a205c6..795ae36 100644
> --- a/drivers/staging/pi433/pi433_if.c
> +++ b/drivers/staging/pi433/pi433_if.c
> @@ -133,19 +133,14 @@ static irqreturn_t DIO0_irq_handler(int irq, void *dev_id)
> {
> struct pi433_device *device = dev_id;
>
> - if (device->irq_state[DIO0] == DIO_PacketSent)
> - {
> + if (device->irq_state[DIO0] == DIO_PacketSent) {
> device->free_in_fifo = FIFO_SIZE;
> dev_dbg(device->dev, "DIO0 irq: Packet sent\n");
> wake_up_interruptible(&device->fifo_wait_queue);
> - }
> - else if (device->irq_state[DIO0] == DIO_Rssi_DIO0)
> - {
> + } else if (device->irq_state[DIO0] == DIO_Rssi_DIO0) {
> dev_dbg(device->dev, "DIO0 irq: RSSI level over threshold\n");
> wake_up_interruptible(&device->rx_wait_queue);
> - }
> - else if (device->irq_state[DIO0] == DIO_PayloadReady)
> - {
> + } else if (device->irq_state[DIO0] == DIO_PayloadReady) {
> dev_dbg(device->dev, "DIO0 irq: PayloadReady\n");
> device->free_in_fifo = 0;
> wake_up_interruptible(&device->fifo_wait_queue);
I suggest using a switch/case and presumably the
dev_dbg should be dev_dbg_ratelimited.
Perhaps:
{
const char *msg = NULL;
struct wait_queue_head *wqh;
switch (device->irq_state[DIO0]) {
case DIO_PacketSent:
device_free_in_fifo = FIFO_SIZE;
wqh = &device->fifo_wait_queue;
msg = "Packet sent";
break;
case DIO_PayloadReady:
device_free_in_fifo = 0;
wqh = &device->fifo_wait_queue;
msg = "PayloadReady";
break;
case DIO_Rssi_DIO0:
wqh = &device->rx_wait_queue;
msg = "RSSI level over
threshold";
break;
}
if (msg) {
dev_dbg_ratelimited(device->dev, "DIO0 irq: %s\n", msg);
wake_up_interruptible(whq);
}
return IRQ_HANDLED;
}
> @@ -158,12 +153,9 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> {
> struct pi433_device *device = dev_id;
>
> - if (device->irq_state[DIO1] == DIO_FifoNotEmpty_DIO1)
> - {
> + if (device->irq_state[DIO1] == DIO_FifoNotEmpty_DIO1) {
> device->free_in_fifo = FIFO_SIZE;
> - }
> - else if (device->irq_state[DIO1] == DIO_FifoLevel)
> - {
> + } else if (device->irq_state[DIO1] == DIO_FifoLevel) {
> if (device->rx_active) device->free_in_fifo = FIFO_THRESHOLD - 1;
> else device->free_in_fifo = FIFO_SIZE - FIFO_THRESHOLD - 1;
> }
> @@ -198,12 +190,9 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> /* packet config */
> /* enable */
> SET_CHECKED(rf69_set_sync_enable(dev->spi, rx_cfg->enable_sync));
> - if (rx_cfg->enable_sync == optionOn)
> - {
> + if (rx_cfg->enable_sync == optionOn) {
> SET_CHECKED(rf69_set_fifo_fill_condition(dev->spi, afterSyncInterrupt));
> - }
> - else
> - {
> + } else {
> SET_CHECKED(rf69_set_fifo_fill_condition(dev->spi, always));
> }
> if (rx_cfg->enable_length_byte == optionOn) {
> @@ -220,29 +209,22 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
>
> /* lengths */
> SET_CHECKED(rf69_set_sync_size(dev->spi, rx_cfg->sync_length));
> - if (rx_cfg->enable_length_byte == optionOn)
> - {
> + if (rx_cfg->enable_length_byte == optionOn) {
> SET_CHECKED(rf69_set_payload_length(dev->spi, 0xff));
> - }
> - else if (rx_cfg->fixed_message_length != 0)
> - {
> + } else if (rx_cfg->fixed_message_length != 0) {
> payload_length = rx_cfg->fixed_message_length;
> if (rx_cfg->enable_length_byte == optionOn) payload_length++;
> if (rx_cfg->enable_address_filtering != filteringOff) payload_length++;
> SET_CHECKED(rf69_set_payload_length(dev->spi, payload_length));
> - }
> - else
> - {
> + } else {
> SET_CHECKED(rf69_set_payload_length(dev->spi, 0));
> }
>
> /* values */
> if (rx_cfg->enable_sync == optionOn)
> - {
> SET_CHECKED(rf69_set_sync_values(dev->spi, rx_cfg->sync_pattern));
> - }
> - if (rx_cfg->enable_address_filtering != filteringOff)
> - {
> +
> + if (rx_cfg->enable_address_filtering != filteringOff) {
> SET_CHECKED(rf69_set_node_address (dev->spi, rx_cfg->node_address));
> SET_CHECKED(rf69_set_broadcast_address(dev->spi, rx_cfg->broadcast_address));
> }
> @@ -265,13 +247,10 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
>
> /* packet format enable */
> if (tx_cfg->enable_preamble == optionOn)
> - {
> SET_CHECKED(rf69_set_preamble_length(dev->spi, tx_cfg->preamble_length));
> - }
> else
> - {
> SET_CHECKED(rf69_set_preamble_length(dev->spi, 0));
> - }
> +
> SET_CHECKED(rf69_set_sync_enable (dev->spi, tx_cfg->enable_sync));
> if (tx_cfg->enable_length_byte == optionOn) {
> ret = rf69_set_packet_format(dev->spi, packetLengthVar);
> @@ -341,8 +320,8 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> /* wait for any tx to finish */
> dev_dbg(dev->dev,"rx: going to wait for any tx to finish");
> retval = wait_event_interruptible(dev->rx_wait_queue, !dev->tx_active);
> - if(retval) /* wait was interrupted */
> - {
> + /* wait was interrupted */
> + if (retval) {
> dev->interrupt_rx_allowed = true;
> wake_up_interruptible(&dev->tx_wait_queue);
> return retval;
> @@ -359,8 +338,7 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> return retval;
>
> /* now check RSSI, if low wait for getting high (RSSI interrupt) */
> - while ( !rf69_get_flag(dev->spi, rssiExceededThreshold) )
> - {
> + while (!rf69_get_flag(dev->spi, rssiExceededThreshold)) {
> /* allow tx to interrupt us while waiting for high RSSI */
> dev->interrupt_rx_allowed = true;
> wake_up_interruptible(&dev->tx_wait_queue);
> @@ -383,25 +361,20 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> irq_set_irq_type(dev->irq_num[DIO0], IRQ_TYPE_EDGE_RISING);
>
> /* fixed or unlimited length? */
> - if (dev->rx_cfg.fixed_message_length != 0)
> - {
> - if (dev->rx_cfg.fixed_message_length > dev->rx_buffer_size)
> - {
> + if (dev->rx_cfg.fixed_message_length != 0) {
> + if (dev->rx_cfg.fixed_message_length > dev->rx_buffer_size) {
> retval = -1;
> goto abort;
> }
> bytes_total = dev->rx_cfg.fixed_message_length;
> dev_dbg(dev->dev,"rx: msg len set to %d by fixed length", bytes_total);
> - }
> - else
> - {
> + } else {
> bytes_total = dev->rx_buffer_size;
> dev_dbg(dev->dev, "rx: msg len set to %d as requested by read", bytes_total);
> }
>
> /* length byte enabled? */
> - if (dev->rx_cfg.enable_length_byte == optionOn)
> - {
> + if (dev->rx_cfg.enable_length_byte == optionOn) {
> retval = wait_event_interruptible(dev->fifo_wait_queue,
> dev->free_in_fifo < FIFO_SIZE);
> if (retval) goto abort; /* wait was interrupted */
> @@ -416,8 +389,7 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> }
>
> /* address byte enabled? */
> - if (dev->rx_cfg.enable_address_filtering != filteringOff)
> - {
> + if (dev->rx_cfg.enable_address_filtering != filteringOff) {
> u8 dummy;
>
> bytes_total--;
> @@ -432,10 +404,8 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> }
>
> /* get payload */
> - while (dev->rx_position < bytes_total)
> - {
> - if ( !rf69_get_flag(dev->spi, payloadReady) )
> - {
> + while (dev->rx_position < bytes_total) {
> + if (!rf69_get_flag(dev->spi, payloadReady)) {
> retval = wait_event_interruptible(dev->fifo_wait_queue,
> dev->free_in_fifo < FIFO_SIZE);
> if (retval) goto abort; /* wait was interrupted */
> @@ -489,8 +459,7 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> int position, repetitions;
> int retval;
>
> - while (1)
> - {
> + while (1) {
> /* wait for fifo to be populated or for request to terminate*/
> dev_dbg(device->dev, "thread: going to wait for new messages");
> wait_event_interruptible(device->tx_wait_queue,
> @@ -565,8 +534,7 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> disable_irq(device->irq_num[DIO0]);
> device->tx_active = true;
>
> - if (device->rx_active && rx_interrupted == false)
> - {
> + if (device->rx_active && rx_interrupted == false) {
> /* rx is currently waiting for a telegram;
> * we need to set the radio module to standby
> */
> @@ -578,13 +546,9 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> SET_CHECKED(rf69_set_mode(spi, standby)); /* this clears the fifo */
> SET_CHECKED(rf69_set_fifo_threshold(spi, FIFO_THRESHOLD));
> if (tx_cfg.enable_length_byte == optionOn)
> - {
> SET_CHECKED(rf69_set_payload_length(spi, size * tx_cfg.repetitions));
> - }
> else
> - {
> SET_CHECKED(rf69_set_payload_length(spi, 0));
> - }
>
> /* configure the rf chip */
> rf69_set_tx_cfg(device, &tx_cfg);
> @@ -607,19 +571,17 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> device->free_in_fifo = FIFO_SIZE;
> position = 0;
> repetitions = tx_cfg.repetitions;
> - while( (repetitions > 0) && (size > position) )
> - {
> - if ( (size - position) > device->free_in_fifo)
> - { /* msg to big for fifo - take a part */
> + while ((repetitions > 0) && (size > position)) {
> + if ((size - position) > device->free_in_fifo) {
> + /* msg to big for fifo - take a part */
> int temp = device->free_in_fifo;
> device->free_in_fifo = 0;
> rf69_write_fifo(spi,
> &buffer[position],
> temp);
> position +=temp;
> - }
> - else
> - { /* msg fits into fifo - take all */
> + } else {
> + /* msg fits into fifo - take all */
> device->free_in_fifo -= size;
> repetitions--;
> rf69_write_fifo(spi,
> @@ -648,8 +610,7 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
> /* everything sent? */
> if (kfifo_is_empty(&device->tx_fifo)) {
> abort:
> - if (rx_interrupted)
> - {
> + if (rx_interrupted) {
> rx_interrupted = false;
> pi433_start_rx(device);
> }
> @@ -678,13 +639,10 @@ static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
>
> /* just one read request at a time */
> mutex_lock(&device->rx_lock);
> - if (device->rx_active)
> - {
> + if (device->rx_active) {
> mutex_unlock(&device->rx_lock);
> return -EAGAIN;
> - }
> - else
> - {
> + } else {
> device->rx_active = true;
> mutex_unlock(&device->rx_lock);
> }
> @@ -909,8 +867,7 @@ static int setup_GPIOs(struct pi433_device *device)
> DIO1_irq_handler
> };
>
> - for (i=0; i<NUM_DIO; i++)
> - {
> + for (i = 0; i < NUM_DIO; i++) {
> /* "construct" name and get the gpio descriptor */
> snprintf(name, sizeof(name), "DIO%d", i);
> device->gpiod[i] = gpiod_get(&device->spi->dev, name, 0 /*GPIOD_IN*/);
> @@ -923,12 +880,10 @@ static int setup_GPIOs(struct pi433_device *device)
> if (device->gpiod[i] == ERR_PTR(-EBUSY))
> dev_dbg(&device->spi->dev, "%s is busy.", name);
>
> - if ( IS_ERR(device->gpiod[i]) )
> - {
> + if (IS_ERR(device->gpiod[i])) {
> retval = PTR_ERR(device->gpiod[i]);
> /* release already allocated gpios */
> - for (i--; i>=0; i--)
> - {
> + for (i--; i >= 0; i--) {
> free_irq(device->irq_num[i], device);
> gpiod_put(device->gpiod[i]);
> }
> @@ -967,8 +922,7 @@ static void free_GPIOs(struct pi433_device *device)
> {
> int i;
>
> - for (i=0; i<NUM_DIO; i++)
> - {
> + for (i = 0; i < NUM_DIO; i++) {
> /* check if gpiod is valid */
> if ( IS_ERR(device->gpiod[i]) )
> continue;
> @@ -1032,13 +986,10 @@ static int pi433_probe(struct spi_device *spi)
> /* spi->max_speed_hz = 10000000; 1MHz already set by device tree overlay */
>
> retval = spi_setup(spi);
> - if (retval)
> - {
> + if (retval) {
> dev_dbg(&spi->dev, "configuration of SPI interface failed!\n");
> return retval;
> - }
> - else
> - {
> + } else {
> dev_dbg(&spi->dev,
> "spi interface setup: mode 0x%2x, %d bits per word, %dhz max speed",
> spi->mode, spi->bits_per_word, spi->max_speed_hz);
> @@ -1124,8 +1075,7 @@ static int pi433_probe(struct spi_device *spi)
> pr_err("pi433: device register failed\n");
> retval = PTR_ERR(device->dev);
> goto device_create_failed;
> - }
> - else {
> + } else {
> dev_dbg(device->dev,
> "created device for major %d, minor %d\n",
> MAJOR(pi433_dev),
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
