On 11/15/2017 11:18 AM, Rob Herring wrote:
On Thu, Nov 09, 2017 at 11:29:08AM -0800, David Daney wrote:
From: Carlos Munoz <cmunoz@xxxxxxxxxx>
Add bindings for Common Ethernet Interface (BGX) block.
Signed-off-by: Carlos Munoz <cmunoz@xxxxxxxxxx>
Signed-off-by: Steven J. Hill <Steven.Hill@xxxxxxxxxx>
Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---
.../devicetree/bindings/net/cavium-bgx.txt | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/cavium-bgx.txt
diff --git a/Documentation/devicetree/bindings/net/cavium-bgx.txt b/Documentation/devicetree/bindings/net/cavium-bgx.txt
new file mode 100644
index 000000000000..6b1f8b994c20
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-bgx.txt
@@ -0,0 +1,61 @@
+* Common Ethernet Interface (BGX) block
+
+Properties:
+
+- compatible: "cavium,octeon-7890-bgx": Compatibility with all cn7xxx SOCs.
+
+- reg: The base address of the BGX block.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>. BGX addresses have no size component.
+
+A BGX block has several children, each representing an Ethernet
+interface.
+
+
+* Ethernet Interface (BGX port) connects to PKI/PKO
+
+Properties:
+
+- compatible: "cavium,octeon-7890-bgx-port": Compatibility with all
+ cn7xxx SOCs.
+
+ "cavium,octeon-7360-xcv": Compatibility with cn73xx SOCs
+ for RGMII.
+
+- reg: The index of the interface within the BGX block.
There's no memory mapped region associated with the sub-blocks?
No. Many of the sub block control bits are co-located in the same
registers.
+
+Optional properties:
+
+- local-mac-address: Mac address for the interface.
+
+- phy-handle: phandle to the phy node connected to the interface.
+
+- phy-mode: described in ethernet.txt.
+
+- fixed-link: described in fixed-link.txt.
+
+Example:
+
+ ethernet-mac-nexus@11800e0000000 {
+ compatible = "cavium,octeon-7890-bgx";
+ reg = <0x00011800 0xe0000000 0x00000000 0x01000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-mac@0 {
ethernet@0
Good point. I will fix that.
+ compatible = "cavium,octeon-7360-xcv";
+ reg = <0>;
+ local-mac-address = [ 00 01 23 45 67 89 ];
+ phy-handle = <&phy3>;
+ phy-mode = "rgmii-rxid"
+ };
+ ethernet-mac@1 {
ditto.
Otherwise,
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Thanks,
David Daney
+ compatible = "cavium,octeon-7890-bgx-port";
+ reg = <1>;
+ local-mac-address = [ 00 01 23 45 67 8a ];
+ phy-handle = <&phy4>;
+ phy-mode = "sgmii"
+ };
+ };
--
2.13.6
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
