Re: [PATCH v3 2/2] ARM: dts: tegra20: Add video decoder node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/10/17 21:08, Dmitry Osipenko wrote:
> Add a device node for the video decoder engine found on Tegra20.
> 
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/tegra20.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
> index 7c85f97f72ea..1b5d54b6c0cb 100644
> --- a/arch/arm/boot/dts/tegra20.dtsi
> +++ b/arch/arm/boot/dts/tegra20.dtsi
> @@ -249,6 +249,23 @@
>  		*/
>  	};
>  
> +	vde@6001a000 {
> +		compatible = "nvidia,tegra20-vde";
> +		reg = <0x6001a000 0x3D00    /* VDE registers */
> +		       0x40000400 0x3FC00>; /* IRAM region */
> +		reg-names = "regs", "iram";
> +		interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>, /* UCQ error interrupt */
> +			     <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
> +			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
> +			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, /* BSE-A interrupt */
> +			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
> +		interrupt-names = "ucq-error", "sync-token", "bsev", "bsea", "sxe";
> +		clocks = <&tegra_car TEGRA20_CLK_VDE>;
> +		clock-names = "vde";
> +		resets = <&tegra_car 61>;
> +		reset-names = "vde";
> +	};
> +

I don't see any binding documentation for this node. We need to make
sure we add this.

Jon

-- 
nvpublic
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux