Hello Michael,
On Thu, Jan 20, 2011 at 06:50:02PM +1100, ahern.michael.t@xxxxxxxxx wrote:
> From: Michael Ahern <ahern.michael.t@xxxxxxxxx>
>
> This patch resolves braces and KERN_ warnings by checkpatch.pl
> Warnings: printk() should include KERN_ facility level, removed unnecessary braces, lines over 80 chars
>
> Signed-off-by: Michael Ahern <ahern.michael.t@xxxxxxxxx>
> ---
> drivers/staging/comedi/drivers/serial2002.c | 172 ++++++++++++---------------
> 1 files changed, 76 insertions(+), 96 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
> index 6949086..eee14dd 100644
> --- a/drivers/staging/comedi/drivers/serial2002.c
> +++ b/drivers/staging/comedi/drivers/serial2002.c
> @@ -246,7 +246,12 @@ static void tty_setspeed(struct file *f, int speed)
> struct termios settings;
>
> tty_ioctl(f, TCGETS, (unsigned long)&settings);
> -/* printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX)); */
> +
> + /* printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX));
> + * better
> + * pr_info("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX));
> + */
> +
can you just delete these commented out printks?
> settings.c_iflag = 0;
> settings.c_oflag = 0;
> settings.c_lflag = 0;
> @@ -254,41 +259,36 @@ static void tty_setspeed(struct file *f, int speed)
> settings.c_cc[VMIN] = 0;
> settings.c_cc[VTIME] = 0;
> switch (speed) {
> - case 2400:{
> - settings.c_cflag |= B2400;
> - }
> + case 2400:
> + settings.c_cflag |= B2400;
> break;
> - case 4800:{
> - settings.c_cflag |= B4800;
> - }
> + case 4800:
> + settings.c_cflag |= B4800;
> break;
> - case 9600:{
> - settings.c_cflag |= B9600;
> - }
> + case 9600:
> + settings.c_cflag |= B9600;
> break;
> - case 19200:{
> - settings.c_cflag |= B19200;
> - }
> + case 19200:
> + settings.c_cflag |= B19200;
> break;
> - case 38400:{
> - settings.c_cflag |= B38400;
> - }
> + case 38400:
> + settings.c_cflag |= B38400;
> break;
> - case 57600:{
> - settings.c_cflag |= B57600;
> - }
> + case 57600:
> + settings.c_cflag |= B57600;
> break;
> - case 115200:{
> - settings.c_cflag |= B115200;
> - }
> + case 115200:
> + settings.c_cflag |= B115200;
> break;
> - default:{
> - settings.c_cflag |= B9600;
> - }
> + default:
> + settings.c_cflag |= B9600;
> break;
> }
> tty_ioctl(f, TCSETS, (unsigned long)&settings);
> -/* printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX)); */
> +/* printk("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX));
> + * better
> + * pr_info("Speed: %d\n", settings.c_cflag & (CBAUD | CBAUDEX));
> + */
> }
> {
> /* Set low latency */
> @@ -332,22 +332,20 @@ static struct serial_data serial_read(struct file *f, int timeout)
>
> length++;
> if (data < 0) {
> - printk(KERN_ERR "serial2002 error\n");
> + pr_err("serial2002 error\n");
Maybe do #define pr_fmt(fmt) "serial2002: " fmt and remove all explicit
occurences of serial2002?
> break;
> } else if (data & 0x80) {
> result.value = (result.value << 7) | (data & 0x7f);
> } else {
> if (length == 1) {
> switch ((data >> 5) & 0x03) {
> - case 0:{
> - result.value = 0;
> - result.kind = is_digital;
> - }
> + case 0:
> + result.value = 0;
> + result.kind = is_digital;
> break;
> - case 1:{
> - result.value = 1;
> - result.kind = is_digital;
> - }
> + case 1:
> + result.value = 1;
> + result.kind = is_digital;
> break;
> }
> } else {
> @@ -405,7 +403,7 @@ static int serial_2002_open(struct comedi_device *dev)
> devpriv->tty = filp_open(port, O_RDWR, 0);
> if (IS_ERR(devpriv->tty)) {
> result = (int)PTR_ERR(devpriv->tty);
> - printk(KERN_ERR "serial_2002: file open error = %d\n", result);
> + pr_err("serial_2002: file open error = %d\n", result);
> } else {
> struct config_t {
>
> @@ -453,38 +451,32 @@ static int serial_2002_open(struct comedi_device *dev)
> kind = (data.value >> 5) & 0x7;
> command = (data.value >> 8) & 0x3;
> switch (kind) {
> - case 1:{
> + case 1:
> cur_config = dig_in_config;
> - }
> break;
> - case 2:{
> + case 2:
> cur_config = dig_out_config;
> - }
> break;
> - case 3:{
> + case 3:
> cur_config = chan_in_config;
> - }
> break;
> - case 4:{
> + case 4:
> cur_config = chan_out_config;
> - }
> break;
> - case 5:{
> + case 5:
> cur_config = chan_in_config;
> - }
> break;
> }
>
> if (cur_config) {
> cur_config[channel].kind = kind;
> switch (command) {
> - case 0:{
> + case 0:
> cur_config[channel].bits
> = (data.value >> 10) &
> 0x3f;
> - }
> break;
> - case 1:{
> + case 1: {
> int unit, sign, min;
> unit = (data.value >> 10) &
> 0x7;
> @@ -494,17 +486,14 @@ static int serial_2002_open(struct comedi_device *dev)
> 0xfffff;
>
> switch (unit) {
> - case 0:{
> + case 0:
> min = min * 1000000;
> - }
> break;
> - case 1:{
> + case 1:
> min = min * 1000;
> - }
> break;
> - case 2:{
> + case 2:
> min = min * 1;
> - }
> break;
> }
>
> @@ -514,7 +503,7 @@ static int serial_2002_open(struct comedi_device *dev)
> cur_config[channel].min = min;
> }
> break;
> - case 2:{
> + case 2: {
> int unit, sign, max;
> unit = (data.value >> 10) &
> 0x7;
> @@ -524,17 +513,14 @@ static int serial_2002_open(struct comedi_device *dev)
> 0xfffff;
>
> switch (unit) {
> - case 0:{
> + case 0:
> max = max * 1000000;
> - }
> break;
> - case 1:{
> + case 1:
> max = max * 1000;
> - }
> break;
> - case 2:{
> + case 2:
> max = max * 1;
> - }
> break;
> }
>
> @@ -556,42 +542,36 @@ static int serial_2002_open(struct comedi_device *dev)
> int kind = 0;
>
> switch (i) {
> - case 0:{
> - c = dig_in_config;
> - mapping = devpriv->digital_in_mapping;
> - kind = 1;
> - }
> + case 0:
> + c = dig_in_config;
> + mapping = devpriv->digital_in_mapping;
> + kind = 1;
> break;
> - case 1:{
> - c = dig_out_config;
> - mapping = devpriv->digital_out_mapping;
> - kind = 2;
> - }
> + case 1:
> + c = dig_out_config;
> + mapping = devpriv->digital_out_mapping;
> + kind = 2;
> break;
> - case 2:{
> - c = chan_in_config;
> - mapping = devpriv->analog_in_mapping;
> - range = devpriv->in_range;
> - kind = 3;
> - }
> + case 2:
> + c = chan_in_config;
> + mapping = devpriv->analog_in_mapping;
> + range = devpriv->in_range;
> + kind = 3;
> break;
> - case 3:{
> - c = chan_out_config;
> - mapping = devpriv->analog_out_mapping;
> - range = devpriv->out_range;
> - kind = 4;
> - }
> + case 3:
> + c = chan_out_config;
> + mapping = devpriv->analog_out_mapping;
> + range = devpriv->out_range;
> + kind = 4;
> break;
> - case 4:{
> - c = chan_in_config;
> - mapping = devpriv->encoder_in_mapping;
> - range = devpriv->in_range;
> - kind = 5;
> - }
> + case 4:
> + c = chan_in_config;
> + mapping = devpriv->encoder_in_mapping;
> + range = devpriv->in_range;
> + kind = 5;
> break;
> - default:{
> - c = NULL;
> - }
> + default:
> + c = NULL;
> break;
> }
> if (c) {
> @@ -816,7 +796,7 @@ static int serial2002_attach(struct comedi_device *dev,
> {
> struct comedi_subdevice *s;
>
> - printk(KERN_INFO "comedi%d: serial2002: ", dev->minor);
> + pr_info("comedi%d: serial2002: ", dev->minor);
> dev->board_name = thisboard->name;
> if (alloc_private(dev, sizeof(struct serial2002_private)) < 0)
> return -ENOMEM;
> @@ -825,7 +805,7 @@ static int serial2002_attach(struct comedi_device *dev,
> dev->close = serial_2002_close;
> devpriv->port = it->options[0];
> devpriv->speed = it->options[1];
> - printk(KERN_INFO "/dev/ttyS%d @ %d\n", devpriv->port, devpriv->speed);
> + pr_info("/dev/ttyS%d @ %d\n", devpriv->port, devpriv->speed);
>
> if (alloc_subdevices(dev, 5) < 0)
> return -ENOMEM;
> @@ -884,7 +864,7 @@ static int serial2002_detach(struct comedi_device *dev)
> struct comedi_subdevice *s;
> int i;
>
> - printk(KERN_ERR "comedi%d: serial2002: remove\n", dev->minor);
> + pr_err("comedi%d: serial2002: remove\n", dev->minor);
dev_err(dev, "...");
I wonder why this is an error though.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
