Re: [PATCH v3 05/14] mux: core: Add usb.h header with MUX_USB_* and and MUX_TYPEC_* state constants

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

Sorry about the late response.

On Fri, Sep 22, 2017 at 08:37:54PM +0200, Hans de Goede wrote:
> Add MUX_USB_* and MUX_TYPEC_* state constant defines, which can be used by
> USB device/host, resp. Type-C polarity/role/altmode mux drivers and
> consumers to ensure that they agree on the meaning of the
> mux_control_select() state argument.
> 
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> Changes in v2:
> -Start numbering of defines at 0 not 1
> -Use a new usb.h header, rather then adding these to consumer.h
> -Add separate MUX_USB_* and MUX_TYPEC_* defines
> 
> Changes in v3:
> -Simplify MUX_TYPEC_* states, drop having separate USB HOST / DEVICE states
> ---
>  include/linux/mux/usb.h | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 include/linux/mux/usb.h
> 
> diff --git a/include/linux/mux/usb.h b/include/linux/mux/usb.h
> new file mode 100644
> index 000000000000..2fec06846e14
> --- /dev/null
> +++ b/include/linux/mux/usb.h
> @@ -0,0 +1,31 @@
> +/*
> + * mux/usb.h - definitions for USB multiplexers
> + *
> + * Copyright (C) 2017 Hans de Goede <hdegoede@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef _LINUX_MUX_USB_H
> +#define _LINUX_MUX_USB_H
> +
> +/* Mux state values for USB device/host role muxes */
> +#define MUX_USB_DEVICE		(0) /* USB device mode */
> +#define MUX_USB_HOST		(1) /* USB host mode */
> +#define MUX_USB_STATES		(2)
> +
> +/*
> + * Mux state values for Type-C polarity/role/altmode muxes.
> + *
> + * MUX_TYPEC_POLARITY_INV may be or-ed together with any other mux-state as
> + * inverted-polarity (Type-C plugged in upside down) can happen with any
> + * other mux-state.
> + */
> +#define MUX_TYPEC_POLARITY_INV		BIT(0)   /* Polarity inverted bit */
> +#define MUX_TYPEC_USB			(0 << 1) /* USB only mode */

Predefined values for the usb role are probable OK (maybe), but..

> +#define MUX_TYPEC_USB_AND_DP		(1 << 1) /* USB host + 2 lanes DP */
> +#define MUX_TYPEC_DP			(2 << 1) /* 4 lanes Display Port */
> +#define MUX_TYPEC_STATES		(3 << 1)

..for alternate modes, no way. We don't need to try to keep a list of
all the possible states in one place. The pin configurations need to be
defined per alternate mode (per SVID), and we should not mix the
whole mux subsystem into that.

You are also only considering muxing. We need to deliver the
negotiated pin configurations to other components as well. For
example, in case of DisplayPort, the DP controller will need to know
at least the lane count, but also most likely the plug orientation.

And also, I think this is clear to everybody, but just in case it
isn't: Let's not mix TCPM or TCPC into the alternate mode specific pin
configuration handling at all. The alternate mode specific drivers can
take care of that. I think I need to prepare RFC out of my "alternate
mode bus" idea to give you guys an idea how that should work. Give me
a day or two.

But in any case, drop all alternate mode stuff from this series.
Let's move one step at the time.


Thanks,

-- 
heikki
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux