The d3_delay parameter is set by arch/x86/pci/intel_mid_pci.c and drivers/pci/quirks.c. No need to override that settings in unrelated driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- .../atomisp/include/asm/intel_mid_pcihelpers.h | 8 ------ .../platform/intel-mid/intel_mid_pcihelpers.c | 33 ---------------------- 2 files changed, 41 deletions(-) diff --git a/drivers/staging/media/atomisp/include/asm/intel_mid_pcihelpers.h b/drivers/staging/media/atomisp/include/asm/intel_mid_pcihelpers.h index b7c079f3630a..0d7f5c618b56 100644 --- a/drivers/staging/media/atomisp/include/asm/intel_mid_pcihelpers.h +++ b/drivers/staging/media/atomisp/include/asm/intel_mid_pcihelpers.h @@ -18,14 +18,6 @@ #define PCI_ROOT_MSGBUS_WRITE 0x11 #define PCI_ROOT_MSGBUS_DWORD_ENABLE 0xf0 -/* In BYT platform for all internal PCI devices d3 delay - * of 3 ms is sufficient. Default value of 10 ms is overkill. - */ -#define INTERNAL_PCI_PM_D3_WAIT 3 - -#define ISP_SUB_CLASS 0x80 -#define SUB_CLASS_MASK 0xFF00 - u32 intel_mid_msgbus_read32_raw(u32 cmd); u32 intel_mid_msgbus_read32(u8 port, u32 addr); void intel_mid_msgbus_write32_raw(u32 cmd, u32 data); diff --git a/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c b/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c index 0d01a269989d..341bfd3ab313 100644 --- a/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c +++ b/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c @@ -161,36 +161,3 @@ u32 intel_mid_soc_stepping(void) return pci_root->revision; } EXPORT_SYMBOL(intel_mid_soc_stepping); - -static bool is_south_complex_device(struct pci_dev *dev) -{ - unsigned int base_class = dev->class >> 16; - unsigned int sub_class = (dev->class & SUB_CLASS_MASK) >> 8; - - /* other than camera, pci bridges and display, - * everything else are south complex devices. - */ - if (((base_class == PCI_BASE_CLASS_MULTIMEDIA) && - (sub_class == ISP_SUB_CLASS)) || - (base_class == PCI_BASE_CLASS_BRIDGE) || - ((base_class == PCI_BASE_CLASS_DISPLAY) && !sub_class)) - return false; - else - return true; -} - -/* In BYT platform, d3_delay for internal south complex devices, - * they are not subject to 10 ms d3 to d0 delay required by pci spec. - */ -static void pci_d3_delay_fixup(struct pci_dev *dev) -{ - if (platform_is(INTEL_ATOM_BYT) || - platform_is(INTEL_ATOM_CHT)) { - /* All internal devices are in bus 0. */ - if (dev->bus->number == 0 && is_south_complex_device(dev)) { - dev->d3_delay = INTERNAL_PCI_PM_D3_WAIT; - dev->d3cold_delay = INTERNAL_PCI_PM_D3_WAIT; - } - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3_delay_fixup); -- 2.14.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel