From: Xenofon Foukas <foukas.xenofon@xxxxxxxxx>
This patch fixes the following issues in ni_tiocmd.c:
WARNING: braces {} are not necessary for any arm of this statement
WARNING: braces {} are not necessary for single statement blocks
WARNING: printk() should include KERN_ facility level
WARNING: line over 80 characters
__func__ should be used instead of gcc specific __FUNCTION__
ERROR: that open brace { should be on the previous line
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
Signed-off-by: Xenofon Foukas <foukas.xenofon@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/comedi/drivers/ni_tiocmd.c | 71 +++++++++++++---------------
1 files changed, 33 insertions(+), 38 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c
index b0d44b5..a961158 100644
--- a/drivers/staging/comedi/drivers/ni_tiocmd.c
+++ b/drivers/staging/comedi/drivers/ni_tiocmd.c
@@ -62,11 +62,10 @@ static void ni_tio_configure_dma(struct ni_gpct *counter, short enable,
unsigned input_select_bits = 0;
if (enable) {
- if (read_not_write) {
+ if (read_not_write)
input_select_bits |= Gi_Read_Acknowledges_Irq;
- } else {
+ else
input_select_bits |= Gi_Write_Acknowledges_Irq;
- }
}
ni_tio_set_bits(counter,
NITIO_Gi_Input_Select_Reg(counter->counter_index),
@@ -84,9 +83,8 @@ static void ni_tio_configure_dma(struct ni_gpct *counter, short enable,
gi_dma_config_bits |= Gi_DMA_Enable_Bit;
gi_dma_config_bits |= Gi_DMA_Int_Bit;
}
- if (read_not_write == 0) {
+ if (read_not_write == 0)
gi_dma_config_bits |= Gi_DMA_Write_Bit;
- }
ni_tio_set_bits(counter,
NITIO_Gi_DMA_Config_Reg(counter->
counter_index),
@@ -174,7 +172,7 @@ static int ni_tio_input_cmd(struct ni_gpct *counter, struct comedi_async *async)
static int ni_tio_output_cmd(struct ni_gpct *counter,
struct comedi_async *async)
{
- printk("ni_tio: output commands not yet implemented.\n");
+ printk(KERN_ERR "ni_tio: output commands not yet implemented.\n");
return -ENOTSUPP;
counter->mite_chan->dir = COMEDI_OUTPUT;
@@ -198,9 +196,8 @@ static int ni_tio_cmd_setup(struct ni_gpct *counter, struct comedi_async *async)
set_gate_source = 1;
gate_source = cmd->convert_arg;
}
- if (set_gate_source) {
+ if (set_gate_source)
retval = ni_tio_set_gate_src(counter, 0, gate_source);
- }
if (cmd->flags & TRIG_WAKE_EOS) {
ni_tio_set_bits(counter,
NITIO_Gi_Interrupt_Enable_Reg(counter->
@@ -221,22 +218,21 @@ int ni_tio_cmd(struct ni_gpct *counter, struct comedi_async *async)
spin_lock_irqsave(&counter->lock, flags);
if (counter->mite_chan == NULL) {
- printk
- ("ni_tio: commands only supported with DMA. Interrupt-driven commands not yet implemented.\n");
+ printk(KERN_ERR "ni_tio: commands only supported with DMA. Interrupt-driven commands not yet implemented.\n");
retval = -EIO;
} else {
retval = ni_tio_cmd_setup(counter, async);
if (retval == 0) {
- if (cmd->flags & CMDF_WRITE) {
+ if (cmd->flags & CMDF_WRITE)
retval = ni_tio_output_cmd(counter, async);
- } else {
+ else
retval = ni_tio_input_cmd(counter, async);
- }
}
}
spin_unlock_irqrestore(&counter->lock, flags);
return retval;
}
+EXPORT_SYMBOL_GPL(ni_tio_cmd);
int ni_tio_cmdtest(struct ni_gpct *counter, struct comedi_cmd *cmd)
{
@@ -342,6 +338,7 @@ int ni_tio_cmdtest(struct ni_gpct *counter, struct comedi_cmd *cmd)
return 0;
}
+EXPORT_SYMBOL_GPL(ni_tio_cmdtest);
int ni_tio_cancel(struct ni_gpct *counter)
{
@@ -349,9 +346,8 @@ int ni_tio_cancel(struct ni_gpct *counter)
ni_tio_arm(counter, 0, 0);
spin_lock_irqsave(&counter->lock, flags);
- if (counter->mite_chan) {
+ if (counter->mite_chan)
mite_dma_disarm(counter->mite_chan);
- }
spin_unlock_irqrestore(&counter->lock, flags);
ni_tio_configure_dma(counter, 0, 0);
@@ -361,10 +357,11 @@ int ni_tio_cancel(struct ni_gpct *counter)
0x0);
return 0;
}
+EXPORT_SYMBOL_GPL(ni_tio_cancel);
- /* During buffered input counter operation for e-series, the gate interrupt is acked
- automatically by the dma controller, due to the Gi_Read/Write_Acknowledges_IRQ bits
- in the input select register. */
+ /* During buffered input counter operation for e-series, the gate
+ interrupt is acked automatically by the dma controller, due to the
+ Gi_Read/Write_Acknowledges_IRQ bits in the input select register. */
static int should_ack_gate(struct ni_gpct *counter)
{
unsigned long flags;
@@ -372,7 +369,10 @@ static int should_ack_gate(struct ni_gpct *counter)
switch (counter->counter_dev->variant) {
case ni_gpct_variant_m_series:
- case ni_gpct_variant_660x: /* not sure if 660x really supports gate interrupts (the bits are not listed in register-level manual) */
+ /* not sure if 660x really supports gate
+ interrupts (the bits are not listed
+ in register-level manual) */
+ case ni_gpct_variant_660x:
return 1;
break;
case ni_gpct_variant_e_series:
@@ -416,7 +416,8 @@ void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, int *gate_error,
if (gxx_status & Gi_Gate_Error_Bit(counter->counter_index)) {
ack |= Gi_Gate_Error_Confirm_Bit(counter->counter_index);
if (gate_error) {
- /*660x don't support automatic acknowledgement of gate interrupt via dma read/write
+ /*660x don't support automatic acknowledgement
+ of gate interrupt via dma read/write
and report bogus gate errors */
if (counter->counter_dev->variant !=
ni_gpct_variant_660x) {
@@ -429,9 +430,8 @@ void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, int *gate_error,
if (tc_error)
*tc_error = 1;
}
- if (gi_status & Gi_TC_Bit) {
+ if (gi_status & Gi_TC_Bit)
ack |= Gi_TC_Interrupt_Ack_Bit;
- }
if (gi_status & Gi_Gate_Interrupt_Bit) {
if (should_ack_gate(counter))
ack |= Gi_Gate_Interrupt_Ack_Bit;
@@ -452,13 +452,14 @@ void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter, int *gate_error,
NITIO_Gxx_Joint_Status2_Reg
(counter->counter_index)) &
Gi_Permanent_Stale_Bit(counter->counter_index)) {
- printk("%s: Gi_Permanent_Stale_Data detected.\n",
- __FUNCTION__);
+ printk(KERN_INFO "%s: Gi_Permanent_Stale_Data detected.\n",
+ __func__);
if (perm_stale_data)
*perm_stale_data = 1;
}
}
}
+EXPORT_SYMBOL_GPL(ni_tio_acknowledge_and_confirm);
void ni_tio_handle_interrupt(struct ni_gpct *counter,
struct comedi_subdevice *s)
@@ -472,20 +473,19 @@ void ni_tio_handle_interrupt(struct ni_gpct *counter,
ni_tio_acknowledge_and_confirm(counter, &gate_error, &tc_error,
&perm_stale_data, NULL);
if (gate_error) {
- printk("%s: Gi_Gate_Error detected.\n", __FUNCTION__);
+ printk(KERN_NOTICE "%s: Gi_Gate_Error detected.\n", __func__);
s->async->events |= COMEDI_CB_OVERFLOW;
}
- if (perm_stale_data) {
+ if (perm_stale_data)
s->async->events |= COMEDI_CB_ERROR;
- }
switch (counter->counter_dev->variant) {
case ni_gpct_variant_m_series:
case ni_gpct_variant_660x:
if (read_register(counter,
- NITIO_Gi_DMA_Status_Reg
- (counter->counter_index)) & Gi_DRQ_Error_Bit)
- {
- printk("%s: Gi_DRQ_Error detected.\n", __FUNCTION__);
+ NITIO_Gi_DMA_Status_Reg
+ (counter->counter_index)) & Gi_DRQ_Error_Bit) {
+ printk(KERN_NOTICE "%s: Gi_DRQ_Error detected.\n",
+ __func__);
s->async->events |= COMEDI_CB_OVERFLOW;
}
break;
@@ -506,6 +506,7 @@ void ni_tio_handle_interrupt(struct ni_gpct *counter,
mite_sync_input_dma(counter->mite_chan, s->async);
spin_unlock_irqrestore(&counter->lock, flags);
}
+EXPORT_SYMBOL_GPL(ni_tio_handle_interrupt);
void ni_tio_set_mite_channel(struct ni_gpct *counter,
struct mite_channel *mite_chan)
@@ -516,6 +517,7 @@ void ni_tio_set_mite_channel(struct ni_gpct *counter,
counter->mite_chan = mite_chan;
spin_unlock_irqrestore(&counter->lock, flags);
}
+EXPORT_SYMBOL_GPL(ni_tio_set_mite_channel);
static int __init ni_tiocmd_init_module(void)
{
@@ -529,10 +531,3 @@ static void __exit ni_tiocmd_cleanup_module(void)
}
module_exit(ni_tiocmd_cleanup_module);
-
-EXPORT_SYMBOL_GPL(ni_tio_cmd);
-EXPORT_SYMBOL_GPL(ni_tio_cmdtest);
-EXPORT_SYMBOL_GPL(ni_tio_cancel);
-EXPORT_SYMBOL_GPL(ni_tio_handle_interrupt);
-EXPORT_SYMBOL_GPL(ni_tio_set_mite_channel);
-EXPORT_SYMBOL_GPL(ni_tio_acknowledge_and_confirm);
--
1.7.3.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
