Re: [PATCH 1/2] staging: typec: tcpm: Report right typec_pwr_opmode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/15/2017 04:22 PM, Badhri Jagan Sridharan wrote:
At present, TCPM does not take into account the actual resistor
value presented in the CC line and therefore reports TYPEC_PWR_MODE_USB
irrespective of the power_op_mode it is in.
This patch makes TCPM consider the actual value of Rp.

Signed-off-by: Badhri Jagan Sridharan <Badhri@xxxxxxxxxx>

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

---
  drivers/staging/typec/tcpm.c | 21 +++++++++++++++++++--
  1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
index 20eb4ebcf8c3..a24e6bbb909c 100644
--- a/drivers/staging/typec/tcpm.c
+++ b/drivers/staging/typec/tcpm.c
@@ -2123,9 +2123,23 @@ static void tcpm_swap_complete(struct tcpm_port *port, int result)
  	}
  }
+enum typec_pwr_opmode tcpm_get_pwr_opmode(enum typec_cc_status cc)
+{
+	switch (cc) {
+	case TYPEC_CC_RP_1_5:
+		return TYPEC_PWR_MODE_1_5A;
+	case TYPEC_CC_RP_3_0:
+		return TYPEC_PWR_MODE_3_0A;
+	case TYPEC_CC_RP_DEF:
+	default:
+		return TYPEC_PWR_MODE_USB;
+	}
+}
+
  static void run_state_machine(struct tcpm_port *port)
  {
  	int ret;
+	enum typec_pwr_opmode opmode;
port->enter_state = port->state;
  	switch (port->state) {
@@ -2201,7 +2215,8 @@ static void run_state_machine(struct tcpm_port *port)
  			       ret < 0 ? 0 : PD_T_PS_SOURCE_ON);
  		break;
  	case SRC_STARTUP:
-		typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB);
+		opmode =  tcpm_get_pwr_opmode(tcpm_rp_cc(port));
+		typec_set_pwr_opmode(port->typec_port, opmode);
  		port->pwr_opmode = TYPEC_PWR_MODE_USB;
  		port->caps_count = 0;
  		port->message_id = 0;
@@ -2362,7 +2377,9 @@ static void run_state_machine(struct tcpm_port *port)
  		break;
  	case SNK_STARTUP:
  		/* XXX: callback into infrastructure */
-		typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB);
+		opmode =  tcpm_get_pwr_opmode(port->polarity ?
+					      port->cc2 : port->cc1);
+		typec_set_pwr_opmode(port->typec_port, opmode);
  		port->pwr_opmode = TYPEC_PWR_MODE_USB;
  		port->message_id = 0;
  		port->rx_msgid = -1;


_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux