[PATCH 2/7] staging: typec: tcpm: Report role swap complete after entering READY state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Role swap requests fail unless the current role is either SRC_READY or
SNK_READY. This works fine for VCONN and data role swaps, where we
immediately enter READY state after reporting a successful role swap
to user space. However, on power role changes, the role swap is currently
reported as successful while power negotiation is still in process.
User space does not know this, and may request another role swap
immediately after a power role swap is reported to be complete.
This second role swap will fail with -EAGAIN.

To fix the problem, report role swap completion after power negotiation
is complete and the state machine enters SRC_READY or SNK_READY state.
This is better anyway since it captures errors due to failed power
negotiations. It also simplifies the code since the number of calls
needed to report successful role swaps is reduced.

Reported-by: Howard Yen <howard_yen@xxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
 drivers/staging/typec/tcpm.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
index 06c49873df8e..be2a91b52d69 100644
--- a/drivers/staging/typec/tcpm.c
+++ b/drivers/staging/typec/tcpm.c
@@ -2262,8 +2262,8 @@ static void run_state_machine(struct tcpm_port *port)
 #endif
 		port->try_src_count = 0;
 
+		tcpm_swap_complete(port, 0);
 		tcpm_typec_connect(port);
-
 		tcpm_check_send_discover(port);
 		/*
 		 * 6.3.5
@@ -2445,8 +2445,8 @@ static void run_state_machine(struct tcpm_port *port)
 		typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD);
 		port->pwr_opmode = TYPEC_PWR_MODE_PD;
 
+		tcpm_swap_complete(port, 0);
 		tcpm_typec_connect(port);
-
 		tcpm_check_send_discover(port);
 		break;
 
@@ -2574,7 +2574,6 @@ static void run_state_machine(struct tcpm_port *port)
 				       TYPEC_HOST);
 			port->send_discover = true;
 		}
-		tcpm_swap_complete(port, 0);
 		tcpm_set_state(port, ready_state(port), 0);
 		break;
 
@@ -2622,7 +2621,6 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_state_cond(port, SNK_UNATTACHED, PD_T_PS_SOURCE_ON);
 		break;
 	case PR_SWAP_SRC_SNK_SINK_ON:
-		tcpm_swap_complete(port, 0);
 		tcpm_set_state(port, SNK_STARTUP, 0);
 		break;
 	case PR_SWAP_SNK_SRC_SINK_OFF:
@@ -2642,7 +2640,6 @@ static void run_state_machine(struct tcpm_port *port)
 		 */
 		tcpm_set_pwr_role(port, TYPEC_SOURCE);
 		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
-		tcpm_swap_complete(port, 0);
 		tcpm_set_state(port, SRC_STARTUP, 0);
 		break;
 
@@ -2672,12 +2669,10 @@ static void run_state_machine(struct tcpm_port *port)
 	case VCONN_SWAP_TURN_ON_VCONN:
 		tcpm_set_vconn(port, true);
 		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
-		tcpm_swap_complete(port, 0);
 		tcpm_set_state(port, ready_state(port), 0);
 		break;
 	case VCONN_SWAP_TURN_OFF_VCONN:
 		tcpm_set_vconn(port, false);
-		tcpm_swap_complete(port, 0);
 		tcpm_set_state(port, ready_state(port), 0);
 		break;
 
-- 
2.7.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux