change comment style to match codingstyle. Issue found by checkpatch
change four comments.
Signed-off-by: Harold Gomez <haroldgmz11@xxxxxxxxx>
---
drivers/staging/media/atomisp/i2c/ap1302.c | 38 ++++++++++++++++++++----------
1 file changed, 25 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/ap1302.c b/drivers/staging/media/atomisp/i2c/ap1302.c
index 3e229ba..68e0b83 100644
--- a/drivers/staging/media/atomisp/i2c/ap1302.c
+++ b/drivers/staging/media/atomisp/i2c/ap1302.c
@@ -321,12 +321,15 @@ static int ap1302_request_firmware(struct v4l2_subdev *sd)
return ret;
}
-/* When loading firmware, host writes firmware data from address 0x8000.
- When the address reaches 0x9FFF, the next address should return to 0x8000.
- This function handles this address window and load firmware data to AP1302.
- win_pos indicates the offset within this window. Firmware loading procedure
- may call this function several times. win_pos records the current position
- that has been written to.*/
+/*
+ * When loading firmware, host writes firmware data from address 0x8000.
+ * When the address reaches 0x9FFF, the next address should return to 0x8000.
+ * This function handles this address window and load firmware data to AP1302.
+ * win_pos indicates the offset within this window. Firmware loading procedure
+ * may call this function several times. win_pos records the current position
+ * that has been written to.
+ *
+ */
static int ap1302_write_fw_window(struct v4l2_subdev *sd,
u16 *win_pos, const u8 *buf, u32 len)
{
@@ -371,9 +374,12 @@ static int ap1302_load_firmware(struct v4l2_subdev *sd)
dev_err(&client->dev, "firmware size does not match.\n");
return -EINVAL;
}
- /* The fw binary contains a header of struct ap1302_firmware.
- Following the header is the bootdata of AP1302.
- The bootdata pointer can be referenced as &fw[1]. */
+ /*
+ * The fw binary contains a header of struct ap1302_firmware.
+ * Following the header is the bootdata of AP1302.
+ * The bootdata pointer can be referenced as &fw[1].
+ *
+ */
fw_data = (u8 *)&fw[1];
/* Clear crc register. */
@@ -386,8 +392,11 @@ static int ap1302_load_firmware(struct v4l2_subdev *sd)
if (ret)
return ret;
- /* Write 2 to bootdata_stage register to apply basic_init_hp
- settings and enable PLL. */
+ /*
+ * Write 2 to bootdata_stage register to apply basic_init_hp
+ * settings and enable PLL.
+ *
+ */
ret = ap1302_i2c_write_reg(sd, REG_BOOTDATA_STAGE,
AP1302_REG16, 0x0002);
if (ret)
@@ -413,8 +422,11 @@ static int ap1302_load_firmware(struct v4l2_subdev *sd)
return -EAGAIN;
}
- /* Write 0xFFFF to bootdata_stage register to indicate AP1302 that
- the whole bootdata content has been loaded. */
+ /*
+ * Write 0xFFFF to bootdata_stage register to indicate AP1302 that
+ * the whole bootdata content has been loaded.
+ *
+ */
ret = ap1302_i2c_write_reg(sd, REG_BOOTDATA_STAGE,
AP1302_REG16, 0xFFFF);
if (ret)
--
2.1.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
