No longer needed, now all managed by transparent VF logic.
Signed-off-by: Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>
---
tools/hv/bondvf.sh | 255 -----------------------------------------------------
1 file changed, 255 deletions(-)
delete mode 100755 tools/hv/bondvf.sh
diff --git a/tools/hv/bondvf.sh b/tools/hv/bondvf.sh
deleted file mode 100755
index 80f102860cf8..000000000000
--- a/tools/hv/bondvf.sh
+++ /dev/null
@@ -1,255 +0,0 @@
-#!/bin/bash
-
-# This example script creates bonding network devices based on synthetic NIC
-# (the virtual network adapter usually provided by Hyper-V) and the matching
-# VF NIC (SRIOV virtual function). So the synthetic NIC and VF NIC can
-# function as one network device, and fail over to the synthetic NIC if VF is
-# down.
-#
-# Usage:
-# - After configured vSwitch and vNIC with SRIOV, start Linux virtual
-# machine (VM)
-# - Run this scripts on the VM. It will create configuration files in
-# distro specific directory.
-# - Reboot the VM, so that the bonding config are enabled.
-#
-# The config files are DHCP by default. You may edit them if you need to change
-# to Static IP or change other settings.
-#
-
-sysdir=/sys/class/net
-netvsc_cls={f8615163-df3e-46c5-913f-f2d2f965ed0e}
-bondcnt=0
-
-# Detect Distro
-if [ -f /etc/redhat-release ];
-then
- cfgdir=/etc/sysconfig/network-scripts
- distro=redhat
-elif grep -q 'Ubuntu' /etc/issue
-then
- cfgdir=/etc/network
- distro=ubuntu
-elif grep -q 'SUSE' /etc/issue
-then
- cfgdir=/etc/sysconfig/network
- distro=suse
-else
- echo "Unsupported Distro"
- exit 1
-fi
-
-echo Detected Distro: $distro, or compatible
-
-# Get a list of ethernet names
-list_eth=(`cd $sysdir && ls -d */ | cut -d/ -f1 | grep -v bond`)
-eth_cnt=${#list_eth[@]}
-
-echo List of net devices:
-
-# Get the MAC addresses
-for (( i=0; i < $eth_cnt; i++ ))
-do
- list_mac[$i]=`cat $sysdir/${list_eth[$i]}/address`
- echo ${list_eth[$i]}, ${list_mac[$i]}
-done
-
-# Find NIC with matching MAC
-for (( i=0; i < $eth_cnt-1; i++ ))
-do
- for (( j=i+1; j < $eth_cnt; j++ ))
- do
- if [ "${list_mac[$i]}" = "${list_mac[$j]}" ]
- then
- list_match[$i]=${list_eth[$j]}
- break
- fi
- done
-done
-
-function create_eth_cfg_redhat {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo DEVICE=$1 >>$fn
- echo TYPE=Ethernet >>$fn
- echo BOOTPROTO=none >>$fn
- echo UUID=`uuidgen` >>$fn
- echo ONBOOT=yes >>$fn
- echo PEERDNS=yes >>$fn
- echo IPV6INIT=yes >>$fn
- echo MASTER=$2 >>$fn
- echo SLAVE=yes >>$fn
-}
-
-function create_eth_cfg_pri_redhat {
- create_eth_cfg_redhat $1 $2
-}
-
-function create_bond_cfg_redhat {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo DEVICE=$1 >>$fn
- echo TYPE=Bond >>$fn
- echo BOOTPROTO=dhcp >>$fn
- echo UUID=`uuidgen` >>$fn
- echo ONBOOT=yes >>$fn
- echo PEERDNS=yes >>$fn
- echo IPV6INIT=yes >>$fn
- echo BONDING_MASTER=yes >>$fn
- echo BONDING_OPTS=\"mode=active-backup miimon=100 primary=$2\" >>$fn
-}
-
-function del_eth_cfg_ubuntu {
- local mainfn=$cfgdir/interfaces
- local fnlist=( $mainfn )
-
- local dirlist=(`awk '/^[ \t]*source/{print $2}' $mainfn`)
-
- local i
- for i in "${dirlist[@]}"
- do
- fnlist+=(`ls $i 2>/dev/null`)
- done
-
- local tmpfl=$(mktemp)
-
- local nic_start='^[ \t]*(auto|iface|mapping|allow-.*)[ \t]+'$1
- local nic_end='^[ \t]*(auto|iface|mapping|allow-.*|source)'
-
- local fn
- for fn in "${fnlist[@]}"
- do
- awk "/$nic_end/{x=0} x{next} /$nic_start/{x=1;next} 1" \
- $fn >$tmpfl
-
- cp $tmpfl $fn
- done
-
- rm $tmpfl
-}
-
-function create_eth_cfg_ubuntu {
- local fn=$cfgdir/interfaces
-
- del_eth_cfg_ubuntu $1
- echo $'\n'auto $1 >>$fn
- echo iface $1 inet manual >>$fn
- echo bond-master $2 >>$fn
-}
-
-function create_eth_cfg_pri_ubuntu {
- local fn=$cfgdir/interfaces
-
- del_eth_cfg_ubuntu $1
- echo $'\n'allow-hotplug $1 >>$fn
- echo iface $1 inet manual >>$fn
- echo bond-master $2 >>$fn
- echo bond-primary $1 >>$fn
-}
-
-function create_bond_cfg_ubuntu {
- local fn=$cfgdir/interfaces
-
- del_eth_cfg_ubuntu $1
-
- echo $'\n'auto $1 >>$fn
- echo iface $1 inet dhcp >>$fn
- echo bond-mode active-backup >>$fn
- echo bond-miimon 100 >>$fn
- echo bond-slaves none >>$fn
-}
-
-function create_eth_cfg_suse {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo BOOTPROTO=none >>$fn
- echo STARTMODE=auto >>$fn
-}
-
-function create_eth_cfg_pri_suse {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo BOOTPROTO=none >>$fn
- echo STARTMODE=hotplug >>$fn
-}
-
-function create_bond_cfg_suse {
- local fn=$cfgdir/ifcfg-$1
-
- rm -f $fn
- echo BOOTPROTO=dhcp >>$fn
- echo STARTMODE=auto >>$fn
- echo BONDING_MASTER=yes >>$fn
- echo BONDING_SLAVE_0=$2 >>$fn
- echo BONDING_SLAVE_1=$3 >>$fn
- echo BONDING_MODULE_OPTS=\'mode=active-backup miimon=100 primary=$2\' >>$fn
-}
-
-function create_bond {
- local bondname=bond$bondcnt
- local primary
- local secondary
-
- local class_id1=`cat $sysdir/$1/device/class_id 2>/dev/null`
- local class_id2=`cat $sysdir/$2/device/class_id 2>/dev/null`
-
- if [ "$class_id1" = "$netvsc_cls" ]
- then
- primary=$2
- secondary=$1
- elif [ "$class_id2" = "$netvsc_cls" ]
- then
- primary=$1
- secondary=$2
- else
- return 0
- fi
-
- echo $'\nBond name:' $bondname
-
- if [ $distro == ubuntu ]
- then
- local mainfn=$cfgdir/interfaces
- local s="^[ \t]*(auto|iface|mapping|allow-.*)[ \t]+${bondname}"
-
- grep -E "$s" $mainfn
- if [ $? -eq 0 ]
- then
- echo "WARNING: ${bondname} has been configured already"
- return
- fi
- elif [ $distro == redhat ] || [ $distro == suse ]
- then
- local fn=$cfgdir/ifcfg-$bondname
- if [ -f $fn ]
- then
- echo "WARNING: ${bondname} has been configured already"
- return
- fi
- else
- echo "Unsupported Distro: ${distro}"
- return
- fi
-
- echo configuring $primary
- create_eth_cfg_pri_$distro $primary $bondname
-
- echo configuring $secondary
- create_eth_cfg_$distro $secondary $bondname
-
- echo creating: $bondname with primary slave: $primary
- create_bond_cfg_$distro $bondname $primary $secondary
-}
-
-for (( i=0; i < $eth_cnt-1; i++ ))
-do
- if [ -n "${list_match[$i]}" ]
- then
- create_bond ${list_eth[$i]} ${list_match[$i]}
- let bondcnt=bondcnt+1
- fi
-done
--
2.11.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
