From: Brett Rudley <brudley@xxxxxxxxxxxx>
Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/brcm80211/sys/wl_mac80211.c | 25 -------------------------
drivers/staging/brcm80211/sys/wl_mac80211.h | 4 ----
drivers/staging/brcm80211/sys/wlc_bmac.c | 5 -----
drivers/staging/brcm80211/sys/wlc_cfg.h | 16 ----------------
drivers/staging/brcm80211/sys/wlc_mac80211.c | 4 ----
drivers/staging/brcm80211/sys/wlc_mac80211.h | 3 ---
drivers/staging/brcm80211/sys/wlc_pub.h | 3 ---
7 files changed, 0 insertions(+), 60 deletions(-)
diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.c b/drivers/staging/brcm80211/sys/wl_mac80211.c
index 37e6ced..6c162b9 100644
--- a/drivers/staging/brcm80211/sys/wl_mac80211.c
+++ b/drivers/staging/brcm80211/sys/wl_mac80211.c
@@ -40,9 +40,6 @@
#include <wlc_pub.h>
#include <wlc_scb.h>
#include <wl_dbg.h>
-#ifdef BCMSDIO
-#include <bcmsdh.h>
-#endif
#include <wl_export.h>
#include <wl_mac80211.h>
@@ -50,9 +47,6 @@
#include <wl_ucode.h>
#include <d11ucode_ext.h>
-#ifdef BCMSDIO
-extern struct device *sdiommc_dev;
-#endif
extern void wlc_wme_setparams(wlc_info_t *wlc, u16 aci, void *arg,
bool suspend);
@@ -127,7 +121,6 @@ MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
MODULE_LICENSE("Dual BSD/GPL");
-#ifndef BCMSDIO
/* recognized PCI IDs */
static struct pci_device_id wl_id_table[] = {
{PCI_VENDOR_ID_BROADCOM, 0x4357, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* 43225 2G */
@@ -138,12 +131,7 @@ static struct pci_device_id wl_id_table[] = {
MODULE_DEVICE_TABLE(pci, wl_id_table);
static void wl_remove(struct pci_dev *pdev);
-#endif /* !BCMSDIO */
-#ifdef BCMSDIO
-static uint sd_drivestrength = 6;
-module_param(sd_drivestrength, uint, 0);
-#endif
#ifdef BCMDBG
static int msglevel = 0xdeadbeef;
@@ -701,9 +689,6 @@ static wl_info_t *wl_attach(u16 vendor, u16 device, unsigned long regs,
tasklet_init(&wl->tasklet, wl_dpc, (unsigned long) wl);
-#ifdef BCMSDIO
- SET_IEEE80211_DEV(hw, sdiommc_dev);
-#endif
base_addr = regs;
@@ -754,10 +739,6 @@ static wl_info_t *wl_attach(u16 vendor, u16 device, unsigned long regs,
WL_ERROR(("wl%d: Error setting MPC variable to 0\n",
unit));
}
-#ifdef BCMSDIO
- /* Set SDIO drive strength */
- wlc_iovar_setint(wl->wlc, "sd_drivestrength", sd_drivestrength);
-#endif
/* register our interrupt handler */
if (request_irq(irq, wl_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) {
@@ -1048,7 +1029,6 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
return ieee_hw_rate_init(hw);
}
-#ifndef BCMSDIO
/**
* determines if a device is a WL device, and if so, attaches it.
*
@@ -1219,7 +1199,6 @@ static struct pci_driver wl_pci_driver = {
.remove = __devexit_p(wl_remove),
.id_table = wl_id_table,
};
-#endif /* !BCMSDIO */
/**
* This is the main entry point for the WL driver.
@@ -1253,12 +1232,10 @@ static int __init wl_module_init(void)
}
#endif /* BCMDBG */
-#ifndef BCMSDIO
error = pci_register_driver(&wl_pci_driver);
if (!error)
return 0;
-#endif /* !BCMSDIO */
return error;
@@ -1273,9 +1250,7 @@ static int __init wl_module_init(void)
*/
static void __exit wl_module_exit(void)
{
-#ifndef BCMSDIO
pci_unregister_driver(&wl_pci_driver);
-#endif /* !BCMSDIO */
}
diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.h b/drivers/staging/brcm80211/sys/wl_mac80211.h
index 220d570..239ef3a 100644
--- a/drivers/staging/brcm80211/sys/wl_mac80211.h
+++ b/drivers/staging/brcm80211/sys/wl_mac80211.h
@@ -75,10 +75,6 @@ struct wl_info {
atomic_t callbacks; /* # outstanding callback functions */
struct wl_timer *timers; /* timer cleanup queue */
struct tasklet_struct tasklet; /* dpc tasklet */
-#ifdef BCMSDIO
- bcmsdh_info_t *sdh; /* pointer to sdio bus handler */
- unsigned long flags; /* current irq flags */
-#endif /* BCMSDIO */
bool resched; /* dpc needs to be and is rescheduled */
#ifdef LINUXSTA_PS
u32 pci_psstate[16]; /* pci ps-state save/restore */
diff --git a/drivers/staging/brcm80211/sys/wlc_bmac.c b/drivers/staging/brcm80211/sys/wlc_bmac.c
index 110710a..4b27086 100644
--- a/drivers/staging/brcm80211/sys/wlc_bmac.c
+++ b/drivers/staging/brcm80211/sys/wlc_bmac.c
@@ -56,9 +56,6 @@
#include <wl_export.h>
#include "wl_ucode.h"
#include "d11ucode_ext.h"
-#ifdef BCMSDIO
-#include <bcmsdh.h>
-#endif
#include <bcmotp.h>
/* BMAC_NOTE: With WLC_HIGH defined, some fns in this file make calls to high level
@@ -3209,9 +3206,7 @@ static inline u32 wlc_intstatus(wlc_info_t *wlc, bool in_isr)
*/
/* turn off the interrupts */
W_REG(osh, ®s->macintmask, 0);
-#ifndef BCMSDIO
(void)R_REG(osh, ®s->macintmask); /* sync readback */
-#endif
wlc->macintmask = 0;
/* clear device interrupts */
diff --git a/drivers/staging/brcm80211/sys/wlc_cfg.h b/drivers/staging/brcm80211/sys/wlc_cfg.h
index e36d209..e56adb7 100644
--- a/drivers/staging/brcm80211/sys/wlc_cfg.h
+++ b/drivers/staging/brcm80211/sys/wlc_cfg.h
@@ -55,22 +55,6 @@
* 3 5356a0
*/
-#ifdef BCMSDIO
-#define D11CONF 0x100000
-#define SSLPNCONF 2
-#define GCCONF 0
-#define ACCONF 0
-#define NCONF 0
-#define LPCONF 0
-#define LCNCONF 0
-#define NTXD 32
-#define NRXD 16
-#define NRXBUFPOST 8
-#define WLC_DATAHIWAT 32
-#define RXBND 8
-#define MAXPKTCB 64
-#define AMPDU_NUM_MPDU 8
-#endif
/* For undefined values, use defaults */
#ifndef D11CONF
diff --git a/drivers/staging/brcm80211/sys/wlc_mac80211.c b/drivers/staging/brcm80211/sys/wlc_mac80211.c
index c6f64c2..37a87d8 100644
--- a/drivers/staging/brcm80211/sys/wlc_mac80211.c
+++ b/drivers/staging/brcm80211/sys/wlc_mac80211.c
@@ -48,11 +48,7 @@
#include <wlc_ampdu.h>
#include <wlc_event.h>
#include <wl_export.h>
-#ifdef BCMSDIO
-#include <bcmsdh.h>
-#else
#include "d11ucode_ext.h"
-#endif
#include <wlc_alloc.h>
#include <net/mac80211.h>
#include <wl_dbg.h>
diff --git a/drivers/staging/brcm80211/sys/wlc_mac80211.h b/drivers/staging/brcm80211/sys/wlc_mac80211.h
index 459e3cf..8c961e2 100644
--- a/drivers/staging/brcm80211/sys/wlc_mac80211.h
+++ b/drivers/staging/brcm80211/sys/wlc_mac80211.h
@@ -480,9 +480,6 @@ struct wlc_hw_info {
bool phyclk; /* phy is out of reset and has clock */
bool dma_lpbk; /* core is in DMA loopback */
-#ifdef BCMSDIO
- void *sdh;
-#endif
bool ucode_loaded; /* true after ucode downloaded */
diff --git a/drivers/staging/brcm80211/sys/wlc_pub.h b/drivers/staging/brcm80211/sys/wlc_pub.h
index 09be41d..2f4b899 100644
--- a/drivers/staging/brcm80211/sys/wlc_pub.h
+++ b/drivers/staging/brcm80211/sys/wlc_pub.h
@@ -318,9 +318,6 @@ typedef struct wlc_pub {
* is implemented properly in osl of that port
* when it enables this Power Save feature.
*/
-#ifdef BCMSDIO
- uint sdiod_drive_strength; /* SDIO drive strength */
-#endif /* BCMSDIO */
u16 boardrev; /* version # of particular board */
u8 sromrev; /* version # of the srom */
--
1.7.3.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
