From: Cliff Cai <cliff.cai@xxxxxxxxxx>
This is the initial driver in the new Direct Digital Synthesis section.
Signed-off-by: Cliff Cai <cliff.cai@xxxxxxxxxx>
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Acked-by: Jonathan Cameron <jic23@xxxxxxxxx>
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/iio/Kconfig | 1 +
drivers/staging/iio/Makefile | 1 +
drivers/staging/iio/dds/Kconfig | 11 +++
drivers/staging/iio/dds/Makefile | 5 +
drivers/staging/iio/dds/ad5930.c | 170 ++++++++++++++++++++++++++++++++++++++
5 files changed, 188 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/iio/dds/Kconfig
create mode 100644 drivers/staging/iio/dds/Makefile
create mode 100644 drivers/staging/iio/dds/ad5930.c
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index 773c301..5e5bc47 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -44,6 +44,7 @@ source "drivers/staging/iio/accel/Kconfig"
source "drivers/staging/iio/adc/Kconfig"
source "drivers/staging/iio/addac/Kconfig"
source "drivers/staging/iio/dac/Kconfig"
+source "drivers/staging/iio/dds/Kconfig"
source "drivers/staging/iio/gyro/Kconfig"
source "drivers/staging/iio/imu/Kconfig"
source "drivers/staging/iio/light/Kconfig"
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index 15eba01..766a5d1 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -13,6 +13,7 @@ obj-y += accel/
obj-y += adc/
obj-y += addac/
obj-y += dac/
+obj-y += dds/
obj-y += gyro/
obj-y += imu/
obj-y += light/
diff --git a/drivers/staging/iio/dds/Kconfig b/drivers/staging/iio/dds/Kconfig
new file mode 100644
index 0000000..d32bebc
--- /dev/null
+++ b/drivers/staging/iio/dds/Kconfig
@@ -0,0 +1,11 @@
+#
+# Direct Digital Synthesis drivers
+#
+comment "Direct Digital Synthesis"
+
+config AD5930
+ tristate "Analog Devices ad5930/5932 driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices DDS chip
+ ad5930/ad5932, provides direct access via sysfs.
diff --git a/drivers/staging/iio/dds/Makefile b/drivers/staging/iio/dds/Makefile
new file mode 100644
index 0000000..110f289
--- /dev/null
+++ b/drivers/staging/iio/dds/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for Direct Digital Synthesis drivers
+#
+
+obj-$(CONFIG_AD5930) += ad5930.o
diff --git a/drivers/staging/iio/dds/ad5930.c b/drivers/staging/iio/dds/ad5930.c
new file mode 100644
index 0000000..f80039c
--- /dev/null
+++ b/drivers/staging/iio/dds/ad5930.c
@@ -0,0 +1,170 @@
+/*
+ * Driver for ADI Direct Digital Synthesis ad5930
+ *
+ * Copyright (c) 2010-2010 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+
+#define DRV_NAME "ad5930"
+
+#define value_mask (u16)0xf000
+#define addr_shift 12
+
+/* Register format: 4 bits addr + 12 bits value */
+struct ad5903_config {
+ u16 control;
+ u16 incnum;
+ u16 frqdelt[2];
+ u16 incitvl;
+ u16 buritvl;
+ u16 strtfrq[2];
+};
+
+struct ad5930_state {
+ struct mutex lock;
+ struct iio_dev *idev;
+ struct spi_device *sdev;
+};
+
+static ssize_t ad5930_set_parameter(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct spi_message msg;
+ struct spi_transfer xfer;
+ int ret;
+ struct ad5903_config *config = (struct ad5903_config *)buf;
+ struct iio_dev *idev = dev_get_drvdata(dev);
+ struct ad5930_state *st = idev->dev_data;
+
+ config->control = (config->control & ~value_mask);
+ config->incnum = (config->control & ~value_mask) | (1 << addr_shift);
+ config->frqdelt[0] = (config->control & ~value_mask) | (2 << addr_shift);
+ config->frqdelt[1] = (config->control & ~value_mask) | 3 << addr_shift;
+ config->incitvl = (config->control & ~value_mask) | 4 << addr_shift;
+ config->buritvl = (config->control & ~value_mask) | 8 << addr_shift;
+ config->strtfrq[0] = (config->control & ~value_mask) | 0xc << addr_shift;
+ config->strtfrq[1] = (config->control & ~value_mask) | 0xd << addr_shift;
+
+ xfer.len = len;
+ xfer.tx_buf = config;
+ mutex_lock(&st->lock);
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+ ret = spi_sync(st->sdev, &msg);
+ if (ret)
+ goto error_ret;
+error_ret:
+ mutex_unlock(&st->lock);
+
+ return ret ? ret : len;
+}
+
+static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad5930_set_parameter, 0);
+
+static struct attribute *ad5930_attributes[] = {
+ &iio_dev_attr_dds.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ad5930_attribute_group = {
+ .name = DRV_NAME,
+ .attrs = ad5930_attributes,
+};
+
+static int __devinit ad5930_probe(struct spi_device *spi)
+{
+ struct ad5930_state *st;
+ int ret = 0;
+
+ st = kzalloc(sizeof(*st), GFP_KERNEL);
+ if (st == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ spi_set_drvdata(spi, st);
+
+ mutex_init(&st->lock);
+ st->sdev = spi;
+
+ st->idev = iio_allocate_device();
+ if (st->idev == NULL) {
+ ret = -ENOMEM;
+ goto error_free_st;
+ }
+ st->idev->dev.parent = &spi->dev;
+ st->idev->num_interrupt_lines = 0;
+ st->idev->event_attrs = NULL;
+
+ st->idev->attrs = &ad5930_attribute_group;
+ st->idev->dev_data = (void *)(st);
+ st->idev->driver_module = THIS_MODULE;
+ st->idev->modes = INDIO_DIRECT_MODE;
+
+ ret = iio_device_register(st->idev);
+ if (ret)
+ goto error_free_dev;
+ spi->max_speed_hz = 2000000;
+ spi->mode = SPI_MODE_3;
+ spi->bits_per_word = 16;
+ spi_setup(spi);
+
+ return 0;
+
+error_free_dev:
+ iio_free_device(st->idev);
+error_free_st:
+ kfree(st);
+error_ret:
+ return ret;
+}
+
+static int __devexit ad5930_remove(struct spi_device *spi)
+{
+ struct ad5930_state *st = spi_get_drvdata(spi);
+
+ iio_device_unregister(st->idev);
+ kfree(st);
+
+ return 0;
+}
+
+static struct spi_driver ad5930_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad5930_probe,
+ .remove = __devexit_p(ad5930_remove),
+};
+
+static __init int ad5930_spi_init(void)
+{
+ return spi_register_driver(&ad5930_driver);
+}
+module_init(ad5930_spi_init);
+
+static __exit void ad5930_spi_exit(void)
+{
+ spi_unregister_driver(&ad5930_driver);
+}
+module_exit(ad5930_spi_exit);
+
+MODULE_AUTHOR("Cliff Cai");
+MODULE_DESCRIPTION("Analog Devices ad5930 driver");
+MODULE_LICENSE("GPL v2");
--
1.7.3.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
