[PATCH 115/510] staging: iio: meter: new driver for ADE7759 devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Barry Song <barry.song@xxxxxxxxxx>

Signed-off-by: Barry Song <barry.song@xxxxxxxxxx>
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Acked-by: Jonathan Cameron <jic23@xxxxxxxxx>
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/staging/iio/meter/Kconfig   |    7 +
 drivers/staging/iio/meter/Makefile  |    2 +
 drivers/staging/iio/meter/ade7759.c |  670 +++++++++++++++++++++++++++++++++++
 drivers/staging/iio/meter/ade7759.h |  122 +++++++
 4 files changed, 801 insertions(+), 0 deletions(-)
 create mode 100644 drivers/staging/iio/meter/ade7759.c
 create mode 100644 drivers/staging/iio/meter/ade7759.h

diff --git a/drivers/staging/iio/meter/Kconfig b/drivers/staging/iio/meter/Kconfig
index be88bb8..ebc253e 100644
--- a/drivers/staging/iio/meter/Kconfig
+++ b/drivers/staging/iio/meter/Kconfig
@@ -25,3 +25,10 @@ config ADE7758
 	help
 	  Say yes here to build support for Analog Devices ADE7758 Polyphase
 	  Multifunction Energy Metering IC with Per Phase Information Driver.
+
+config ADE7759
+	tristate "Analog Devices ADE7759 Active Energy Metering IC Driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices ADE7758 Active Energy
+	  Metering IC with di/dt Sensor Interface.
diff --git a/drivers/staging/iio/meter/Makefile b/drivers/staging/iio/meter/Makefile
index 8e1a71d..85e3021 100644
--- a/drivers/staging/iio/meter/Makefile
+++ b/drivers/staging/iio/meter/Makefile
@@ -8,3 +8,5 @@ obj-$(CONFIG_ADE7754) += ade7754.o
 ade7758-y             := ade7758_core.o
 ade7758-$(CONFIG_IIO_RING_BUFFER) += ade7758_ring.o ade7758_trigger.o
 obj-$(CONFIG_ADE7758) += ade7758.o
+
+obj-$(CONFIG_ADE7759) += ade7759.o
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
new file mode 100644
index 0000000..fafc3c1
--- /dev/null
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -0,0 +1,670 @@
+/*
+ * ADE7759 Active Energy Metering IC with di/dt Sensor Interface Driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+#include "meter.h"
+#include "ade7759.h"
+
+int ade7759_spi_write_reg_8(struct device *dev,
+		u8 reg_address,
+		u8 val)
+{
+	int ret;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADE7759_WRITE_REG(reg_address);
+	st->tx[1] = val;
+
+	ret = spi_write(st->us, st->tx, 2);
+	mutex_unlock(&st->buf_lock);
+
+	return ret;
+}
+
+static int ade7759_spi_write_reg_16(struct device *dev,
+		u8 reg_address,
+		u16 value)
+{
+	int ret;
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.bits_per_word = 8,
+			.len = 3,
+		}
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADE7759_WRITE_REG(reg_address);
+	st->tx[1] = (value >> 8) & 0xFF;
+	st->tx[2] = value & 0xFF;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(xfers, &msg);
+	ret = spi_sync(st->us, &msg);
+	mutex_unlock(&st->buf_lock);
+
+	return ret;
+}
+
+static int ade7759_spi_read_reg_8(struct device *dev,
+		u8 reg_address,
+		u8 *val)
+{
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.rx_buf = st->rx,
+			.bits_per_word = 8,
+			.len = 2,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADE7759_READ_REG(reg_address);
+	st->tx[1] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(xfers, &msg);
+	ret = spi_sync(st->us, &msg);
+	if (ret) {
+		dev_err(&st->us->dev, "problem when reading 8 bit register 0x%02X",
+				reg_address);
+		goto error_ret;
+	}
+	*val = st->rx[1];
+
+error_ret:
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+static int ade7759_spi_read_reg_16(struct device *dev,
+		u8 reg_address,
+		u16 *val)
+{
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.rx_buf = st->rx,
+			.bits_per_word = 8,
+			.len = 3,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADE7759_READ_REG(reg_address);
+	st->tx[1] = 0;
+	st->tx[2] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(xfers, &msg);
+	ret = spi_sync(st->us, &msg);
+	if (ret) {
+		dev_err(&st->us->dev, "problem when reading 16 bit register 0x%02X",
+				reg_address);
+		goto error_ret;
+	}
+	*val = (st->rx[1] << 8) | st->rx[2];
+
+error_ret:
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+static int ade7759_spi_read_reg_40(struct device *dev,
+		u8 reg_address,
+		u64 *val)
+{
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.rx_buf = st->rx,
+			.bits_per_word = 8,
+			.len = 6,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADE7759_READ_REG(reg_address);
+	memset(&st->tx[1], 0 , 5);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(xfers, &msg);
+	ret = spi_sync(st->us, &msg);
+	if (ret) {
+		dev_err(&st->us->dev, "problem when reading 40 bit register 0x%02X",
+				reg_address);
+		goto error_ret;
+	}
+	*val = ((u64)st->rx[1] << 32) | (st->rx[2] << 24) |
+		(st->rx[3] << 16) | (st->rx[4] << 8) | st->rx[5];
+
+error_ret:
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+static ssize_t ade7759_read_8bit(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int ret;
+	u8 val = 0;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+	ret = ade7759_spi_read_reg_8(dev, this_attr->address, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t ade7759_read_16bit(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int ret;
+	u16 val = 0;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+	ret = ade7759_spi_read_reg_16(dev, this_attr->address, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t ade7759_read_40bit(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int ret;
+	u64 val = 0;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+	ret = ade7759_spi_read_reg_40(dev, this_attr->address, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%llu\n", val);
+}
+
+static ssize_t ade7759_write_8bit(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int ret;
+	long val;
+
+	ret = strict_strtol(buf, 10, &val);
+	if (ret)
+		goto error_ret;
+	ret = ade7759_spi_write_reg_8(dev, this_attr->address, val);
+
+error_ret:
+	return ret ? ret : len;
+}
+
+static ssize_t ade7759_write_16bit(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int ret;
+	long val;
+
+	ret = strict_strtol(buf, 10, &val);
+	if (ret)
+		goto error_ret;
+	ret = ade7759_spi_write_reg_16(dev, this_attr->address, val);
+
+error_ret:
+	return ret ? ret : len;
+}
+
+static int ade7759_reset(struct device *dev)
+{
+	int ret;
+	u16 val;
+	ade7759_spi_read_reg_16(dev,
+			ADE7759_MODE,
+			&val);
+	val |= 1 << 6; /* Software Chip Reset */
+	ret = ade7759_spi_write_reg_16(dev,
+			ADE7759_MODE,
+			val);
+
+	return ret;
+}
+
+static ssize_t ade7759_write_reset(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t len)
+{
+	if (len < 1)
+		return -1;
+	switch (buf[0]) {
+	case '1':
+	case 'y':
+	case 'Y':
+		return ade7759_reset(dev);
+	}
+	return -1;
+}
+
+static IIO_DEV_ATTR_AENERGY(ade7759_read_40bit, ADE7759_AENERGY);
+static IIO_DEV_ATTR_CFDEN(S_IWUSR | S_IRUGO,
+		ade7759_read_16bit,
+		ade7759_write_16bit,
+		ADE7759_CFDEN);
+static IIO_DEV_ATTR_CFNUM(S_IWUSR | S_IRUGO,
+		ade7759_read_8bit,
+		ade7759_write_8bit,
+		ADE7759_CFNUM);
+static IIO_DEV_ATTR_CHKSUM(ade7759_read_8bit, ADE7759_CHKSUM);
+static IIO_DEV_ATTR_PHCAL(S_IWUSR | S_IRUGO,
+		ade7759_read_16bit,
+		ade7759_write_16bit,
+		ADE7759_PHCAL);
+static IIO_DEV_ATTR_APOS(S_IWUSR | S_IRUGO,
+		ade7759_read_16bit,
+		ade7759_write_16bit,
+		ADE7759_APOS);
+static IIO_DEV_ATTR_SAGCYC(S_IWUSR | S_IRUGO,
+		ade7759_read_8bit,
+		ade7759_write_8bit,
+		ADE7759_SAGCYC);
+static IIO_DEV_ATTR_SAGLVL(S_IWUSR | S_IRUGO,
+		ade7759_read_8bit,
+		ade7759_write_8bit,
+		ADE7759_SAGLVL);
+static IIO_DEV_ATTR_LINECYC(S_IWUSR | S_IRUGO,
+		ade7759_read_8bit,
+		ade7759_write_8bit,
+		ADE7759_LINECYC);
+static IIO_DEV_ATTR_LENERGY(ade7759_read_40bit, ADE7759_LENERGY);
+static IIO_DEV_ATTR_PGA_GAIN(S_IWUSR | S_IRUGO,
+		ade7759_read_8bit,
+		ade7759_write_8bit,
+		ADE7759_GAIN);
+static IIO_DEV_ATTR_ACTIVE_POWER_GAIN(S_IWUSR | S_IRUGO,
+		ade7759_read_16bit,
+		ade7759_write_16bit,
+		ADE7759_APGAIN);
+static IIO_DEV_ATTR_CH_OFF(1, S_IWUSR | S_IRUGO,
+		ade7759_read_8bit,
+		ade7759_write_8bit,
+		ADE7759_CH1OS);
+static IIO_DEV_ATTR_CH_OFF(2, S_IWUSR | S_IRUGO,
+		ade7759_read_8bit,
+		ade7759_write_8bit,
+		ADE7759_CH2OS);
+
+static int ade7759_set_irq(struct device *dev, bool enable)
+{
+	int ret;
+	u8 irqen;
+	ret = ade7759_spi_read_reg_8(dev, ADE7759_IRQEN, &irqen);
+	if (ret)
+		goto error_ret;
+
+	if (enable)
+		irqen |= 1 << 3; /* Enables an interrupt when a data is
+				    present in the waveform register */
+	else
+		irqen &= ~(1 << 3);
+
+	ret = ade7759_spi_write_reg_8(dev, ADE7759_IRQEN, irqen);
+	if (ret)
+		goto error_ret;
+
+error_ret:
+	return ret;
+}
+
+/* Power down the device */
+int ade7759_stop_device(struct device *dev)
+{
+	int ret;
+	u16 val;
+	ade7759_spi_read_reg_16(dev,
+			ADE7759_MODE,
+			&val);
+	val |= 1 << 4;  /* AD converters can be turned off */
+	ret = ade7759_spi_write_reg_16(dev,
+			ADE7759_MODE,
+			val);
+
+	return ret;
+}
+
+static int ade7759_initial_setup(struct ade7759_state *st)
+{
+	int ret;
+	struct device *dev = &st->indio_dev->dev;
+
+	/* use low spi speed for init */
+	st->us->mode = SPI_MODE_3;
+	spi_setup(st->us);
+
+	/* Disable IRQ */
+	ret = ade7759_set_irq(dev, false);
+	if (ret) {
+		dev_err(dev, "disable irq failed");
+		goto err_ret;
+	}
+
+	ade7759_reset(dev);
+	msleep(ADE7759_STARTUP_DELAY);
+
+err_ret:
+	return ret;
+}
+
+static ssize_t ade7759_read_frequency(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int ret, len = 0;
+	u16 t;
+	int sps;
+	ret = ade7759_spi_read_reg_16(dev,
+			ADE7759_MODE,
+			&t);
+	if (ret)
+		return ret;
+
+	t = (t >> 3) & 0x3;
+	sps = 27900 / (1 + t);
+
+	len = sprintf(buf, "%d SPS\n", sps);
+	return len;
+}
+
+static ssize_t ade7759_write_frequency(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
+	unsigned long val;
+	int ret;
+	u16 reg, t;
+
+	ret = strict_strtol(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&indio_dev->mlock);
+
+	t = (27900 / val);
+	if (t > 0)
+		t--;
+
+	if (t > 1)
+		st->us->max_speed_hz = ADE7759_SPI_SLOW;
+	else
+		st->us->max_speed_hz = ADE7759_SPI_FAST;
+
+	ret = ade7759_spi_read_reg_16(dev,
+			ADE7759_MODE,
+			&reg);
+	if (ret)
+		goto out;
+
+	reg &= ~(3 << 13);
+	reg |= t << 13;
+
+	ret = ade7759_spi_write_reg_16(dev,
+			ADE7759_MODE,
+			reg);
+
+out:
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret ? ret : len;
+}
+static IIO_DEV_ATTR_TEMP_RAW(ade7759_read_8bit);
+static IIO_CONST_ATTR(temp_offset, "70 C");
+static IIO_CONST_ATTR(temp_scale, "1 C");
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+		ade7759_read_frequency,
+		ade7759_write_frequency);
+
+static IIO_DEV_ATTR_RESET(ade7759_write_reset);
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("27900 14000 7000 3500");
+
+static IIO_CONST_ATTR(name, "ade7759");
+
+static struct attribute *ade7759_event_attributes[] = {
+	NULL
+};
+
+static struct attribute_group ade7759_event_attribute_group = {
+	.attrs = ade7759_event_attributes,
+};
+
+static struct attribute *ade7759_attributes[] = {
+	&iio_dev_attr_temp_raw.dev_attr.attr,
+	&iio_const_attr_temp_offset.dev_attr.attr,
+	&iio_const_attr_temp_scale.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_reset.dev_attr.attr,
+	&iio_const_attr_name.dev_attr.attr,
+	&iio_dev_attr_phcal.dev_attr.attr,
+	&iio_dev_attr_cfden.dev_attr.attr,
+	&iio_dev_attr_aenergy.dev_attr.attr,
+	&iio_dev_attr_cfnum.dev_attr.attr,
+	&iio_dev_attr_apos.dev_attr.attr,
+	&iio_dev_attr_sagcyc.dev_attr.attr,
+	&iio_dev_attr_saglvl.dev_attr.attr,
+	&iio_dev_attr_linecyc.dev_attr.attr,
+	&iio_dev_attr_lenergy.dev_attr.attr,
+	&iio_dev_attr_chksum.dev_attr.attr,
+	&iio_dev_attr_pga_gain.dev_attr.attr,
+	&iio_dev_attr_active_power_gain.dev_attr.attr,
+	&iio_dev_attr_choff_1.dev_attr.attr,
+	&iio_dev_attr_choff_2.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ade7759_attribute_group = {
+	.attrs = ade7759_attributes,
+};
+
+static int __devinit ade7759_probe(struct spi_device *spi)
+{
+	int ret, regdone = 0;
+	struct ade7759_state *st = kzalloc(sizeof *st, GFP_KERNEL);
+	if (!st) {
+		ret =  -ENOMEM;
+		goto error_ret;
+	}
+	/* this is only used for removal purposes */
+	spi_set_drvdata(spi, st);
+
+	/* Allocate the comms buffers */
+	st->rx = kzalloc(sizeof(*st->rx)*ADE7759_MAX_RX, GFP_KERNEL);
+	if (st->rx == NULL) {
+		ret = -ENOMEM;
+		goto error_free_st;
+	}
+	st->tx = kzalloc(sizeof(*st->tx)*ADE7759_MAX_TX, GFP_KERNEL);
+	if (st->tx == NULL) {
+		ret = -ENOMEM;
+		goto error_free_rx;
+	}
+	st->us = spi;
+	mutex_init(&st->buf_lock);
+	/* setup the industrialio driver allocated elements */
+	st->indio_dev = iio_allocate_device();
+	if (st->indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_free_tx;
+	}
+
+	st->indio_dev->dev.parent = &spi->dev;
+	st->indio_dev->num_interrupt_lines = 1;
+	st->indio_dev->event_attrs = &ade7759_event_attribute_group;
+	st->indio_dev->attrs = &ade7759_attribute_group;
+	st->indio_dev->dev_data = (void *)(st);
+	st->indio_dev->driver_module = THIS_MODULE;
+	st->indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = ade7759_configure_ring(st->indio_dev);
+	if (ret)
+		goto error_free_dev;
+
+	ret = iio_device_register(st->indio_dev);
+	if (ret)
+		goto error_unreg_ring_funcs;
+	regdone = 1;
+
+	ret = ade7759_initialize_ring(st->indio_dev->ring);
+	if (ret) {
+		printk(KERN_ERR "failed to initialize the ring\n");
+		goto error_unreg_ring_funcs;
+	}
+
+	if (spi->irq) {
+		ret = iio_register_interrupt_line(spi->irq,
+				st->indio_dev,
+				0,
+				IRQF_TRIGGER_FALLING,
+				"ade7759");
+		if (ret)
+			goto error_uninitialize_ring;
+
+		ret = ade7759_probe_trigger(st->indio_dev);
+		if (ret)
+			goto error_unregister_line;
+	}
+
+	/* Get the device into a sane initial state */
+	ret = ade7759_initial_setup(st);
+	if (ret)
+		goto error_remove_trigger;
+	return 0;
+
+error_remove_trigger:
+	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
+		ade7759_remove_trigger(st->indio_dev);
+error_unregister_line:
+	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
+		iio_unregister_interrupt_line(st->indio_dev, 0);
+error_uninitialize_ring:
+	ade7759_uninitialize_ring(st->indio_dev->ring);
+error_unreg_ring_funcs:
+	ade7759_unconfigure_ring(st->indio_dev);
+error_free_dev:
+	if (regdone)
+		iio_device_unregister(st->indio_dev);
+	else
+		iio_free_device(st->indio_dev);
+error_free_tx:
+	kfree(st->tx);
+error_free_rx:
+	kfree(st->rx);
+error_free_st:
+	kfree(st);
+error_ret:
+	return ret;
+}
+
+/* fixme, confirm ordering in this function */
+static int ade7759_remove(struct spi_device *spi)
+{
+	int ret;
+	struct ade7759_state *st = spi_get_drvdata(spi);
+	struct iio_dev *indio_dev = st->indio_dev;
+
+	ret = ade7759_stop_device(&(indio_dev->dev));
+	if (ret)
+		goto err_ret;
+
+	flush_scheduled_work();
+
+	ade7759_remove_trigger(indio_dev);
+	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
+		iio_unregister_interrupt_line(indio_dev, 0);
+
+	ade7759_uninitialize_ring(indio_dev->ring);
+	ade7759_unconfigure_ring(indio_dev);
+	iio_device_unregister(indio_dev);
+	kfree(st->tx);
+	kfree(st->rx);
+	kfree(st);
+
+	return 0;
+
+err_ret:
+	return ret;
+}
+
+static struct spi_driver ade7759_driver = {
+	.driver = {
+		.name = "ade7759",
+		.owner = THIS_MODULE,
+	},
+	.probe = ade7759_probe,
+	.remove = __devexit_p(ade7759_remove),
+};
+
+static __init int ade7759_init(void)
+{
+	return spi_register_driver(&ade7759_driver);
+}
+module_init(ade7759_init);
+
+static __exit void ade7759_exit(void)
+{
+	spi_unregister_driver(&ade7759_driver);
+}
+module_exit(ade7759_exit);
+
+MODULE_AUTHOR("Barry Song <21cnbao@xxxxxxxxx>");
+MODULE_DESCRIPTION("Analog Devices ADE7759 Active Energy Metering IC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/meter/ade7759.h b/drivers/staging/iio/meter/ade7759.h
new file mode 100644
index 0000000..813dea2
--- /dev/null
+++ b/drivers/staging/iio/meter/ade7759.h
@@ -0,0 +1,122 @@
+#ifndef _ADE7759_H
+#define _ADE7759_H
+
+#define ADE7759_WAVEFORM  0x01
+#define ADE7759_AENERGY   0x02
+#define ADE7759_RSTENERGY 0x03
+#define ADE7759_STATUS    0x04
+#define ADE7759_RSTSTATUS 0x05
+#define ADE7759_MODE      0x06
+#define ADE7759_CFDEN     0x07
+#define ADE7759_CH1OS     0x08
+#define ADE7759_CH2OS     0x09
+#define ADE7759_GAIN      0x0A
+#define ADE7759_APGAIN    0x0B
+#define ADE7759_PHCAL     0x0C
+#define ADE7759_APOS      0x0D
+#define ADE7759_ZXTOUT    0x0E
+#define ADE7759_SAGCYC    0x0F
+#define ADE7759_IRQEN     0x10
+#define ADE7759_SAGLVL    0x11
+#define ADE7759_TEMP      0x12
+#define ADE7759_LINECYC   0x13
+#define ADE7759_LENERGY   0x14
+#define ADE7759_CFNUM     0x15
+#define ADE7759_CHKSUM    0x1E
+#define ADE7759_DIEREV    0x1F
+
+#define ADE7759_READ_REG(a)    a
+#define ADE7759_WRITE_REG(a) ((a) | 0x80)
+
+#define ADE7759_MAX_TX    6
+#define ADE7759_MAX_RX    6
+#define ADE7759_STARTUP_DELAY 1
+
+#define ADE7759_SPI_SLOW	(u32)(300 * 1000)
+#define ADE7759_SPI_BURST	(u32)(1000 * 1000)
+#define ADE7759_SPI_FAST	(u32)(2000 * 1000)
+
+#define DRIVER_NAME		"ade7759"
+
+/**
+ * struct ade7759_state - device instance specific data
+ * @us:			actual spi_device
+ * @work_trigger_to_ring: bh for triggered event handling
+ * @inter:		used to check if new interrupt has been triggered
+ * @last_timestamp:	passing timestamp from th to bh of interrupt handler
+ * @indio_dev:		industrial I/O device structure
+ * @trig:		data ready trigger registered with iio
+ * @tx:			transmit buffer
+ * @rx:			recieve buffer
+ * @buf_lock:		mutex to protect tx and rx
+ **/
+struct ade7759_state {
+	struct spi_device		*us;
+	struct work_struct		work_trigger_to_ring;
+	s64				last_timestamp;
+	struct iio_dev			*indio_dev;
+	struct iio_trigger		*trig;
+	u8				*tx;
+	u8				*rx;
+	struct mutex			buf_lock;
+};
+#if defined(CONFIG_IIO_RING_BUFFER) && defined(THIS_HAS_RING_BUFFER_SUPPORT)
+/* At the moment triggers are only used for ring buffer
+ * filling. This may change!
+ */
+
+enum ade7759_scan {
+	ADE7759_SCAN_ACTIVE_POWER,
+	ADE7759_SCAN_CH1_CH2,
+	ADE7759_SCAN_CH1,
+	ADE7759_SCAN_CH2,
+};
+
+void ade7759_remove_trigger(struct iio_dev *indio_dev);
+int ade7759_probe_trigger(struct iio_dev *indio_dev);
+
+ssize_t ade7759_read_data_from_ring(struct device *dev,
+		struct device_attribute *attr,
+		char *buf);
+
+
+int ade7759_configure_ring(struct iio_dev *indio_dev);
+void ade7759_unconfigure_ring(struct iio_dev *indio_dev);
+
+int ade7759_initialize_ring(struct iio_ring_buffer *ring);
+void ade7759_uninitialize_ring(struct iio_ring_buffer *ring);
+#else /* CONFIG_IIO_RING_BUFFER */
+
+static inline void ade7759_remove_trigger(struct iio_dev *indio_dev)
+{
+}
+static inline int ade7759_probe_trigger(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline ssize_t
+ade7759_read_data_from_ring(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	return 0;
+}
+
+static int ade7759_configure_ring(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+static inline void ade7759_unconfigure_ring(struct iio_dev *indio_dev)
+{
+}
+static inline int ade7759_initialize_ring(struct iio_ring_buffer *ring)
+{
+	return 0;
+}
+static inline void ade7759_uninitialize_ring(struct iio_ring_buffer *ring)
+{
+}
+#endif /* CONFIG_IIO_RING_BUFFER */
+
+#endif
-- 
1.7.3.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux