Signed-off-by: Mike McCormack <mikem@xxxxxxxxxx>
---
.../staging/rtl8192e/ieee80211/rtl819x_HTProc.c | 22 ++++++++++----------
1 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
index ebd1745..e031f42 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
@@ -29,18 +29,18 @@ u16 MCS_DATA_RATE[2][2][77] =
660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } // Short GI, 40MHz
};
-static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
-static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
-static u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};
+static const u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
+static const u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
+static const u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};
//static u8 NETGEAR834Bv2_BROADCOM[3] = {0x00, 0x1b, 0x2f};
-static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f}; //cosa 03202008
-static u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};
-static u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};
-static u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
-static u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
-static u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};
-static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
-static u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};
+static const u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f};
+static const u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};
+static const u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};
+static const u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
+static const u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
+static const u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};
+static const u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
+static const u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};
// 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
// code in other place??
--
1.7.0.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
