Re: [PATCH 1/2] staging: ft1000-pcmcia: Fix compilation errors.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey,

On Fri, Dec 17, 2010 at 09:13:11AM +0100, Marek Belisko wrote:
> Following patch will fix all compilation errors. Main problems
> was with pcmcia API changes. Also remove BROKEN as now driver
> is properly build.

Thanks!

One question, though:

> +int ft1000_get_mac(struct pcmcia_device *p_dev, tuple_t *tuple, void *priv)
>  {
> -	tuple_t tuple;
> +	int i;
>  	cisparse_t parse;
> -	int last_fn, last_ret, i;
> -	u_char buf[64];
>  	cistpl_lan_node_id_t *node_id;
> -	cistpl_cftable_entry_t dflt = { 0 };
> -	cistpl_cftable_entry_t *cfg;
> -	unsigned char mac_address[6];
> -
> -	DEBUG(0, "ft1000_cs: ft1000_config(0x%p)\n", link);
>  
> +	if (!pcmcia_parse_tuple(tuple, &parse)) {
> +		if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID) {
> +			node_id = (cistpl_lan_node_id_t *) parse.funce.data;
> +			if (node_id->nb == 6) {
> +				for (i = 0; i < 6; i++)
> +					*((unsigned char *)priv + i) =
> +						node_id->id[i];
> +				/*
> +				 *  we found MAC address and will
> +				 * end the pcmcia_loop_tuple
> +				 */
> +				return 0;
> +			}
> +		}
> +	}
>  	/*
> -	   This reads the card's CONFIG tuple to find its configuration
> -	   registers.
> +	 * we did not find MAC address in this tuple
> +	 * continue pcmcia_loop_tuple
>  	 */
> -//	tuple.DesiredTuple = CISTPL_CONFIG;
> -//	tuple.Attributes = 0;
> -	tuple.TupleData = buf;
> -	tuple.TupleDataMax = sizeof(buf);
> -	tuple.TupleOffset = 0;
> -//	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
> -//	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
> -//	CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
> -//	link->conf.ConfigBase = parse.config.base;
> -//	link->conf.Present = parse.config.rmask[0];
> +	return 1;
> +}                               /* ft1000_get_mac */

...

> +	/* get the MAC address */
> +	ret = pcmcia_loop_tuple(link, CISTPL_FUNCE,
> +				ft1000_get_mac, mac_address);
> +	if (ret)
> +		goto failed;

Does this differ from the generic pcmcia_get_mac_from_cis() function, or
could we use this generic function for the purposes needed in this driver?

Best,
	Dominik
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux