From: Florian Schilhabel <florian.c.schilhabel@xxxxxxxxxxxxxx>
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/rtl8192su/r8192S_hw.h | 69 ++------------------------------
1 files changed, 5 insertions(+), 64 deletions(-)
diff --git a/drivers/staging/rtl8192su/r8192S_hw.h b/drivers/staging/rtl8192su/r8192S_hw.h
index 82ea96b..a28e524 100644
--- a/drivers/staging/rtl8192su/r8192S_hw.h
+++ b/drivers/staging/rtl8192su/r8192S_hw.h
@@ -29,21 +29,14 @@ typedef enum _VERSION_8192S{
VERSION_8192S_CCUT
}VERSION_8192S,*PVERSION_8192S;
-//#ifdef RTL8192SU
typedef enum _VERSION_8192SUsb{
VERSION_8192SU_A, //A-Cut
VERSION_8192SU_B, //B-Cut
VERSION_8192SU_C, //C-Cut
}VERSION_8192SUsb, *PVERSION_8192SUsb;
-//#else
-typedef enum _VERSION_819xU{
- VERSION_819xU_A, // A-cut
- VERSION_819xU_B, // B-cut
- VERSION_819xU_C,// C-cut
-}VERSION_819xU,*PVERSION_819xU;
-//#endif
-
-/* 2007/11/15 MH Define different RF type. */
+
+
+/* RF type. */
typedef enum _RT_RF_TYPE_DEFINITION
{
RF_1T2R = 0,
@@ -51,9 +44,6 @@ typedef enum _RT_RF_TYPE_DEFINITION
RF_2T2R,
RF_1T1R,
RF_2T2R_GREEN,
- //RF_3T3R,
- //RF_3T4R,
- //RF_4T4R,
RF_819X_MAX_TYPE
}RT_RF_TYPE_DEF_E;
@@ -71,8 +61,6 @@ typedef enum _BaseBand_Config_Type{
#define MAX_RX_URB 16
#define R8180_MAX_RETRY 255
-//#define MAX_RX_NORMAL_URB 3
-//#define MAX_RX_COMMAND_URB 2
#define RX_URB_SIZE 9100
#define BB_ANTATTEN_CHAN14 0x0c
@@ -147,13 +135,6 @@ typedef enum _BaseBand_Config_Type{
#define EPROM_W_SHIFT 1
#define EPROM_R_SHIFT 0
-//#define MAC0 0x000,
-//#define MAC1 0x001,
-//#define MAC2 0x002,
-//#define MAC3 0x003,
-//#define MAC4 0x004,
-//#define MAC5 0x005,
-
//============================================================
// 8192S Regsiter offset definition
//============================================================
@@ -529,14 +510,6 @@ typedef enum _BaseBand_Config_Type{
// USB RPWM register
#define USB_RPWM 0xFE58
-//FIXLZM SVN_BRACH NOT MOD HERE, IF MOD RX IS LITTLE LOW
-//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==PCI_INTERFACE))
-//#define RPWM PCI_RPWM
-//#elif ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
-//#define RPWM USB_RPWM
-//#endif
-
-
//============================================================================
// 8190 Regsiter offset definition
//============================================================================
@@ -777,13 +750,11 @@ typedef enum _BaseBand_Config_Type{
#define RCR_MXDMA_OFFSET 8
#define RCR_FIFO_OFFSET 13
-//in 92U FIXLZM
-//#ifdef RTL8192U
#define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size.
#define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2
#define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1
#define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames
-//#endif
+
//----------------------------------------------------------------------------
// 8192S (MSR) Media Status Register (Offset 0x4C, 8 bits)
//----------------------------------------------------------------------------
@@ -1460,34 +1431,4 @@ Default: 00b.
#define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
#define HAL_8192S_HW_GPIO_WPS_BIT BIT4
-#endif //R8192S_HW
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+#endif
--
1.7.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
