Signed-off-by: Mike Gilks <mike.kernel@xxxxxxxxxxxxxxx>
---
drivers/staging/rtl8192u/r8192U_core.c | 343 ++++++++++++++++----------------
1 files changed, 173 insertions(+), 170 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 6f20518..21e3ac3 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -3524,9 +3524,7 @@ void rtl8192_hwconfig(struct net_device *dev)
u32 ratr_value = 0;
ratr_value = regRATR;
if (priv->rf_type == RF_1T2R)
- {
ratr_value &= ~(RATE_ALL_OFDM_2SS);
- }
write_nic_dword(dev, RATR0, ratr_value);
write_nic_byte(dev, UFWP, 1);
}
@@ -3570,7 +3568,9 @@ bool rtl8192_adapter_start(struct net_device *dev)
else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY)
dwRegRead |= CPU_GEN_FIRMWARE_RESET;
else
- RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __func__, priv->pFirmware->firmware_status);
+ RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware "
+ "state(%d)\n", __func__,
+ priv->pFirmware->firmware_status);
write_nic_dword(dev, CPU_GEN, dwRegRead);
/* mdelay(30); */
@@ -3583,11 +3583,13 @@ bool rtl8192_adapter_start(struct net_device *dev)
dwRegRead = read_nic_dword(dev, CPU_GEN);
if (priv->LoopbackMode == RTL819xU_NO_LOOPBACK)
- dwRegRead = ((dwRegRead & CPU_GEN_NO_LOOPBACK_MSK) | CPU_GEN_NO_LOOPBACK_SET);
+ dwRegRead = ((dwRegRead & CPU_GEN_NO_LOOPBACK_MSK) |
+ CPU_GEN_NO_LOOPBACK_SET);
else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK)
dwRegRead |= CPU_CCK_LOOPBACK;
else
- RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __func__, priv->LoopbackMode);
+ RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback"
+ " mode setting(%d)\n", __func__, priv->LoopbackMode);
write_nic_dword(dev, CPU_GEN, dwRegRead);
@@ -3606,27 +3608,34 @@ bool rtl8192_adapter_start(struct net_device *dev)
write_nic_byte(dev, CMDR, CR_RE|CR_TE);
/* set IDR0 here */
- write_nic_dword(dev, MAC0, ((u32*)dev->dev_addr)[0]);
- write_nic_word(dev, MAC4, ((u16*)(dev->dev_addr + 4))[0]);
+ write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
+ write_nic_word(dev, MAC4, ((u16 *)(dev->dev_addr + 4))[0]);
/* set RCR */
write_nic_dword(dev, RCR, priv->ReceiveConfig);
/* Initialize Number of Reserved Pages in Firmware Queue */
- write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |\
- NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT | \
- NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT | \
- NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
- write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |\
- NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
- write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW| \
- NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT
+ write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK <<
+ RSVD_FW_QUEUE_PAGE_BK_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_BE <<
+ RSVD_FW_QUEUE_PAGE_BE_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_VI <<
+ RSVD_FW_QUEUE_PAGE_VI_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_VO <<
+ RSVD_FW_QUEUE_PAGE_VO_SHIFT);
+ write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT <<
+ RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_CMD <<
+ RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
+ write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
+ NUM_OF_PAGE_IN_FW_QUEUE_BCN <<
+ RSVD_FW_QUEUE_PAGE_BCN_SHIFT
/* | NUM_OF_PAGE_IN_FW_QUEUE_
*PUB<<RSVD_FW_QUEUE_PAGE_
*PUB_SHIFT
*/
);
- write_nic_dword(dev, RATR0+4*7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
+ write_nic_dword(dev, RATR0 + 4 * 7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
/* Set AckTimeout */
/* TODO: (it value is only for FPGA version).
@@ -3637,17 +3646,17 @@ bool rtl8192_adapter_start(struct net_device *dev)
/* RT_TRACE(COMP_INIT, "%s():priv->ResetProgress is %d\n", __func__,
*priv->ResetProgress);
*/
- if(priv->ResetProgress == RESET_TYPE_NORESET)
- rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);
- if(priv->ResetProgress == RESET_TYPE_NORESET){
- CamResetAllEntry(dev);
- {
- u8 SECR_value = 0x0;
- SECR_value |= SCR_TxEncEnable;
- SECR_value |= SCR_RxDecEnable;
- SECR_value |= SCR_NoSKMC;
- write_nic_byte(dev, SECR, SECR_value);
- }
+ if (priv->ResetProgress == RESET_TYPE_NORESET)
+ rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
+ CamResetAllEntry(dev);
+ {
+ u8 SECR_value = 0x0;
+ SECR_value |= SCR_TxEncEnable;
+ SECR_value |= SCR_RxDecEnable;
+ SECR_value |= SCR_NoSKMC;
+ write_nic_byte(dev, SECR, SECR_value);
+ }
}
/* Beacon related */
@@ -3657,17 +3666,18 @@ bool rtl8192_adapter_start(struct net_device *dev)
{
#define DEFAULT_EDCA 0x005e4332
int i;
- for (i=0; i<QOS_QUEUE_NUM; i++)
- write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
+ for (i = 0; i < QOS_QUEUE_NUM; i++)
+ write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
}
#ifdef USB_RX_AGGREGATION_SUPPORT
/* 3 For usb rx firmware aggregation control */
- if(priv->ResetProgress == RESET_TYPE_NORESET)
- {
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
u32 ulValue;
PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
- ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) |
- (pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout);
+ ulValue = (pHTInfo->UsbRxFwAggrEn<<24) |
+ (pHTInfo->UsbRxFwAggrPageNum<<16) |
+ (pHTInfo->UsbRxFwAggrPacketNum<<8) |
+ pHTInfo->UsbRxFwAggrTimeout);
/*
* If usb rx firmware aggregation is enabled,
* when anyone of three threshold conditions above is reached,
@@ -3680,67 +3690,72 @@ bool rtl8192_adapter_start(struct net_device *dev)
rtl8192_phy_configmac(dev);
- if (priv->card_8192_version == (u8) VERSION_819xU_A)
- {
+ if (priv->card_8192_version == (u8) VERSION_819xU_A) {
rtl8192_phy_getTxPower(dev);
rtl8192_phy_setTxPower(dev, priv->chan);
}
/* Firmware download */
init_status = init_firmware(dev);
- if(!init_status)
- {
- RT_TRACE(COMP_ERR,"ERR!!! %s(): Firmware download is failed\n", __func__);
+ if (!init_status) {
+ RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n",
+ __func__);
return init_status;
}
RT_TRACE(COMP_INIT, "%s():after firmware download\n", __func__);
#ifdef TO_DO_LIST
-if(Adapter->ResetProgress == RESET_TYPE_NORESET)
- {
- if(pMgntInfo->RegRfOff == TRUE) {
- /* User disable RF via registry. */
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
- MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
- /* Those action will be discard in MgntActSet_RF_State
- * because off the same state
- */
- for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
- PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
- }
- else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) {
+if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
+ if (pMgntInfo->RegRfOff == TRUE) {
+ /* User disable RF via registry. */
+ RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD,
+ ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff"
+ " ----------\n"));
+ MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
+ /* Those action will be discard in MgntActSet_RF_State
+ * because off the same state
+ */
+ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
+ PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath,
+ 0x4, 0xC00, 0x0);
+ } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) {
/* H/W or S/W RF OFF before sleep. */
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
- MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
- }
- else
- {
+ RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD,
+ ("InitializeAdapter819xUsb(): Turn off RF for"
+ " RfOffReason(%d) ----------\n",
+ pMgntInfo->RfOffReason));
+ MgntActSet_RF_State(Adapter, eRfOff,
+ pMgntInfo->RfOffReason);
+ } else {
pHalData->eRFPowerState = eRfOn;
pMgntInfo->RfOffReason = 0;
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
+ RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD,
+ ("InitializeAdapter819xUsb(): RF is on"
+ " ----------\n"));
}
- }
- else
- {
- if(pHalData->eRFPowerState == eRfOff)
- {
- MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
+ } else {
+ if (pHalData->eRFPowerState == eRfOff) {
+ MgntActSet_RF_State(Adapter, eRfOff,
+ pMgntInfo->RfOffReason);
/* Those action will be discard in MgntActSet_RF_State
* because off the same state
*/
- for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
- PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
+ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath;
+ eRFPath++)
+ PHY_SetRFReg(Adapter,
+ (RF90_RADIO_PATH_E)eRFPath,
+ 0x4, 0xC00, 0x0);
}
}
#endif
/* config RF. */
- if(priv->ResetProgress == RESET_TYPE_NORESET){
- rtl8192_phy_RFConfig(dev);
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
+ rtl8192_phy_RFConfig(dev);
RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__);
}
- if(priv->ieee80211->FwRWRF)
+ if (priv->ieee80211->FwRWRF)
/* We can force firmware to do RF-R/W */
priv->Rf_Mode = RF_OP_By_FW;
else
@@ -3752,54 +3767,49 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
- if(priv->ResetProgress == RESET_TYPE_NORESET)
- {
+ if (priv->ResetProgress == RESET_TYPE_NORESET) {
/* if D or C cut */
u8 tmpvalue = read_nic_byte(dev, 0x301);
- if(tmpvalue ==0x03)
- {
+ if (tmpvalue == 0x03) {
priv->bDcut = TRUE;
RT_TRACE(COMP_POWER_TRACKING, "D-cut\n");
- }
- else
- {
+ } else {
priv->bDcut = FALSE;
RT_TRACE(COMP_POWER_TRACKING, "C-cut\n");
}
dm_initialize_txpower_tracking(dev);
- if(priv->bDcut == TRUE)
- {
+ if (priv->bDcut == TRUE) {
u32 i, TempCCk;
- u32 tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
+ u32 tmpRegA = rtl8192_QueryBBReg(dev,
+ rOFDM0_XATxIQImbalance, bMaskDWord);
/* u32 tmpRegC= rtl8192_QueryBBReg(dev,
* rOFDM0_XCTxIQImbalance,bMaskDWord);
*/
- for(i = 0; i<TxBBGainTableLength; i++)
- {
- if(tmpRegA == priv->txbbgain_table[i].txbbgain_value)
- {
- priv->rfa_txpowertrackingindex= (u8)i;
- priv->rfa_txpowertrackingindex_real= (u8)i;
- priv->rfa_txpowertracking_default= priv->rfa_txpowertrackingindex;
+ for (i = 0; i < TxBBGainTableLength; i++) {
+ if (tmpRegA == priv->txbbgain_table[i].txbbgain_value) {
+ priv->rfa_txpowertrackingindex = (u8)i;
+ priv->rfa_txpowertrackingindex_real =
+ (u8)i;
+ priv->rfa_txpowertracking_default =
+ priv->rfa_txpowertrackingindex;
break;
}
}
- TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
-
- for(i=0 ; i<CCKTxBBGainTableLength ; i++)
- {
+ TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1,
+ bMaskByte2);
- if(TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0])
- {
- priv->cck_present_attentuation_20Mdefault=(u8) i;
+ for (i = 0 ; i < CCKTxBBGainTableLength ; i++) {
+ if (TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0]) {
+ priv->cck_present_attentuation_20Mdefault = (u8) i;
break;
}
}
- priv->cck_present_attentuation_40Mdefault= 0;
- priv->cck_present_attentuation_difference= 0;
- priv->cck_present_attentuation = priv->cck_present_attentuation_20Mdefault;
+ priv->cck_present_attentuation_40Mdefault = 0;
+ priv->cck_present_attentuation_difference = 0;
+ priv->cck_present_attentuation =
+ priv->cck_present_attentuation_20Mdefault;
/* pMgntInfo->bTXPowerTracking = FALSE; */
/* TEMPLY DISABLE */
@@ -3833,14 +3843,13 @@ HalTxCheckStuck819xUsb(
)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- u16 RegTxCounter = read_nic_word(dev, 0x128);
+ u16 RegTxCounter = read_nic_word(dev, 0x128);
bool bStuck = FALSE;
- RT_TRACE(COMP_RESET,"%s():RegTxCounter is %d,TxCounter is %d\n",__func__,RegTxCounter,priv->TxCounter);
- if(priv->TxCounter==RegTxCounter)
+ RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d, TxCounter is %d\n",
+ __func__, RegTxCounter, priv->TxCounter);
+ if (priv->TxCounter == RegTxCounter)
bStuck = TRUE;
-
priv->TxCounter = RegTxCounter;
-
return bStuck;
}
@@ -3863,27 +3872,28 @@ TxCheckStuck(struct net_device *dev)
/* RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n"); */
/* PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK); */
/* spin_lock_irqsave(&priv->ieee80211->lock,flags); */
- for (QueueID = 0; QueueID<=BEACON_QUEUE;QueueID ++)
- {
- if(QueueID == TXCMD_QUEUE)
- continue;
+ for (QueueID = 0; QueueID <= BEACON_QUEUE; QueueID++) {
+ if (QueueID == TXCMD_QUEUE)
+ continue;
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0))
+ if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0)
+ && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0)
+ && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0))
#else
- if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
+ if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0)
+ && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
#endif
- continue;
+ continue;
- bCheckFwTxCnt = true;
+ bCheckFwTxCnt = true;
}
/* PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK); */
/* spin_unlock_irqrestore(&priv->ieee80211->lock,flags); */
/* RT_TRACE(COMP_RESET,"bCheckFwTxCnt is %d\n",bCheckFwTxCnt); */
- if(bCheckFwTxCnt)
- {
- if(HalTxCheckStuck819xUsb(dev))
- {
- RT_TRACE(COMP_RESET, "TxCheckStuck(): Fw indicates no Tx condition! \n");
+ if (bCheckFwTxCnt) {
+ if (HalTxCheckStuck819xUsb(dev)) {
+ RT_TRACE(COMP_RESET, "TxCheckStuck(): Fw indicates no"
+ " Tx condition!\n");
return RESET_TYPE_SILENT;
}
}
@@ -3893,73 +3903,62 @@ TxCheckStuck(struct net_device *dev)
bool
HalRxCheckStuck819xUsb(struct net_device *dev)
{
- u16 RegRxCounter = read_nic_word(dev, 0x130);
+ u16 RegRxCounter = read_nic_word(dev, 0x130);
struct r8192_priv *priv = ieee80211_priv(dev);
bool bStuck = FALSE;
- static u8 rx_chk_cnt = 0;
- RT_TRACE(COMP_RESET,"%s(): RegRxCounter is %d,RxCounter is %d\n",__func__,RegRxCounter,priv->RxCounter);
+ static u8 rx_chk_cnt;
+ RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d, RxCounter is %d\n",
+ __func__, RegRxCounter, priv->RxCounter);
/* If rssi is small, we should check rx for long time because of bad rx.
* or maybe it will continuous silent reset every 2 seconds.
*/
rx_chk_cnt++;
- if(priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High+5))
- {
+ if (priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High + 5))
rx_chk_cnt = 0; /* high rssi, check rx stuck right now. */
- }
- else if(priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) &&
- ((priv->CurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb>=RateAdaptiveTH_Low_40M) ||
- (priv->CurrentChannelBW==HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb>=RateAdaptiveTH_Low_20M)) )
- {
- if(rx_chk_cnt < 2)
- {
+ else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High + 5) &&
+ ((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20 &&
+ priv->undecorated_smoothed_pwdb >=
+ RateAdaptiveTH_Low_40M) ||
+ (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 &&
+ priv->undecorated_smoothed_pwdb >=
+ RateAdaptiveTH_Low_20M))) {
+ if (rx_chk_cnt < 2)
return bStuck;
- }
else
- {
rx_chk_cnt = 0;
- }
- }
- else if(((priv->CurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb<RateAdaptiveTH_Low_40M) ||
- (priv->CurrentChannelBW==HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb<RateAdaptiveTH_Low_20M)) &&
- priv->undecorated_smoothed_pwdb >= VeryLowRSSI)
- {
- if(rx_chk_cnt < 4)
- {
+ } else if (((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20 &&
+ priv->undecorated_smoothed_pwdb <
+ RateAdaptiveTH_Low_40M) ||
+ (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 &&
+ priv->undecorated_smoothed_pwdb <
+ RateAdaptiveTH_Low_20M)) &&
+ priv->undecorated_smoothed_pwdb >= VeryLowRSSI) {
+ if (rx_chk_cnt < 4)
/* DbgPrint("RSSI < %d && RSSI >= %d,"
- * " no check this time \n", RateAdaptiveTH_Low,
+ * " no check this time\n", RateAdaptiveTH_Low,
* VeryLowRSSI);
*/
return bStuck;
- }
else
- {
rx_chk_cnt = 0;
/* DbgPrint("RSSI < %d && RSSI >= %d, check this time"
* "\n", RateAdaptiveTH_Low, VeryLowRSSI);
*/
- }
- }
- else
- {
- if(rx_chk_cnt < 8)
- {
- /* DbgPrint("RSSI <= %d, no check this time \n",
+ } else {
+ if (rx_chk_cnt < 8)
+ /* DbgPrint("RSSI <= %d, no check this time\n",
* VeryLowRSSI);
*/
return bStuck;
- }
else
- {
rx_chk_cnt = 0;
- /* DbgPrint("RSSI <= %d, check this time \n",
+ /* DbgPrint("RSSI <= %d, check this time\n",
* VeryLowRSSI);
*/
- }
}
- if(priv->RxCounter==RegRxCounter)
+ if (priv->RxCounter == RegRxCounter)
bStuck = TRUE;
-
priv->RxCounter = RegRxCounter;
return bStuck;
@@ -3975,15 +3974,13 @@ RxCheckStuck(struct net_device *dev)
/* RT_TRACE(COMP_RESET," ==> RxCheckStuck()\n"); */
/* PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK); */
- if(priv->IrpPendingCount > 1)
+ if (priv->IrpPendingCount > 1)
bRxCheck = TRUE;
/* PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK); */
- /* RT_TRACE(COMP_RESET,"bRxCheck is %d \n",bRxCheck); */
- if(bRxCheck)
- {
- if(HalRxCheckStuck819xUsb(dev))
- {
+ /* RT_TRACE(COMP_RESET,"bRxCheck is %d\n",bRxCheck); */
+ if (bRxCheck) {
+ if (HalRxCheckStuck819xUsb(dev)) {
RT_TRACE(COMP_RESET, "RxStuck Condition\n");
return RESET_TYPE_SILENT;
}
@@ -3991,30 +3988,35 @@ RxCheckStuck(struct net_device *dev)
return RESET_TYPE_NORESET;
}
-/* This function is called by Checkforhang to check whether we should ask OS to reset driver
+/* This function is called by Checkforhang to check whether we should
+ * ask OS to reset driver
*
* \param pAdapter The adapter context for this miniport
*
- * Note:NIC with USB interface sholud not call this function because we cannot scan descriptor
+ * Note:NIC with USB interface sholud not call this function because we
+ * cannot scan descriptor
* to judge whether there is tx stuck.
* Note: This function may be required to be rewrite for Vista OS.
* <<<Assumption: Tx spinlock has been acquired >>>
*
- * 8185 and 8185b does not implement this function. This is added by Emily at 2006.11.24
+ * 8185 and 8185b does not implement this function.
+ * This is added by Emily at 2006.11.24
*/
RESET_TYPE
rtl819x_ifcheck_resetornot(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- RESET_TYPE TxResetType = RESET_TYPE_NORESET;
- RESET_TYPE RxResetType = RESET_TYPE_NORESET;
- RT_RF_POWER_STATE rfState;
+ RESET_TYPE TxResetType = RESET_TYPE_NORESET;
+ RESET_TYPE RxResetType = RESET_TYPE_NORESET;
+ RT_RF_POWER_STATE rfState;
rfState = priv->ieee80211->eRFPowerState;
TxResetType = TxCheckStuck(dev);
- if( rfState != eRfOff ||
- /* ADAPTER_TEST_STATUS_FLAG(Adapter, ADAPTER_STATUS_FW_DOWNLOAD_FAILURE)) && */
+ if (rfState != eRfOff ||
+ /* ADAPTER_TEST_STATUS_FLAG(Adapter,
+ * ADAPTER_STATUS_FW_DOWNLOAD_FAILURE)) &&
+ */
(priv->ieee80211->iw_mode != IW_MODE_ADHOC))
{
/* If driver is in the status of firmware download failure,
@@ -4032,13 +4034,14 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)
*/
RxResetType = RxCheckStuck(dev);
}
- if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
+ if (TxResetType == RESET_TYPE_NORMAL ||
+ RxResetType == RESET_TYPE_NORMAL)
return RESET_TYPE_NORMAL;
- else if(TxResetType==RESET_TYPE_SILENT || RxResetType==RESET_TYPE_SILENT){
- RT_TRACE(COMP_RESET,"%s():silent reset\n",__func__);
+ else if(TxResetType == RESET_TYPE_SILENT ||
+ RxResetType==RESET_TYPE_SILENT){
+ RT_TRACE(COMP_RESET, "%s():silent reset\n", __func__);
return RESET_TYPE_SILENT;
- }
- else
+ } else
return RESET_TYPE_NORESET;
}
--
1.6.3.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
