[PATCH 528/577] staging: trivial: fix typo "seperate"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Anand Gadiyar <gadiyar@xxxxxx>

s/seperate/separate

Signed-off-by: Anand Gadiyar <gadiyar@xxxxxx>
Cc: Jiri Kosina <trivial@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/staging/comedi/drivers/das08.h          |    2 +-
 drivers/staging/dream/camera/msm_vfe8x_proc.c   |    2 +-
 drivers/staging/echo/echo.c                     |    2 +-
 drivers/staging/rt2860/mlme.h                   |    2 +-
 drivers/staging/rtl8192e/ieee80211.h            |    2 +-
 drivers/staging/rtl8192e/ieee80211/ieee80211.h  |    2 +-
 drivers/staging/rtl8192e/r8190_rtl8256.c        |    4 ++--
 drivers/staging/rtl8192e/r8192E_core.c          |    2 +-
 drivers/staging/rtl8192su/ieee80211/ieee80211.h |    2 +-
 drivers/staging/rtl8192su/r8192S_phy.c          |    2 +-
 drivers/staging/rtl8192u/ieee80211.h            |    2 +-
 drivers/staging/rtl8192u/ieee80211/ieee80211.h  |    2 +-
 drivers/staging/wlags49_h2/README.wlags49       |    2 +-
 drivers/staging/wlags49_h2/wl_priv.c            |    2 +-
 drivers/staging/wlags49_h2/wl_wext.c            |    2 +-
 15 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/staging/comedi/drivers/das08.h b/drivers/staging/comedi/drivers/das08.h
index 35d2660..2a30d76 100644
--- a/drivers/staging/comedi/drivers/das08.h
+++ b/drivers/staging/comedi/drivers/das08.h
@@ -62,7 +62,7 @@ struct i8254_struct {
 #define I8254_CTRL 3
 
 struct das08_private_struct {
-	unsigned int do_mux_bits;	/*  bits for do/mux register on boards without seperate do register */
+	unsigned int do_mux_bits;	/*  bits for do/mux register on boards without separate do register */
 	unsigned int do_bits;	/*  bits for do register on boards with register dedicated to digital out only */
 	const unsigned int *pg_gainlist;
 	struct pci_dev *pdev;	/*  struct for pci-das08 */
diff --git a/drivers/staging/dream/camera/msm_vfe8x_proc.c b/drivers/staging/dream/camera/msm_vfe8x_proc.c
index 10aef0e..f80ef96 100644
--- a/drivers/staging/dream/camera/msm_vfe8x_proc.c
+++ b/drivers/staging/dream/camera/msm_vfe8x_proc.c
@@ -3828,7 +3828,7 @@ void vfe_camif_config(struct vfe_cmd_camif_config *in)
 		ctrl->vfeImaskLocal.camifEpoch2Irq = 1;
 	}
 
-	/*  save the content to program CAMIF_CONFIG seperately. */
+	/*  save the content to program CAMIF_CONFIG separately. */
 	ctrl->vfeCamifConfigLocal.camifCfgFromCmd = in->camifConfig;
 
 	/* EFS_Config */
diff --git a/drivers/staging/echo/echo.c b/drivers/staging/echo/echo.c
index 4cc4f2e..58c4e90 100644
--- a/drivers/staging/echo/echo.c
+++ b/drivers/staging/echo/echo.c
@@ -603,7 +603,7 @@ int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx)
 }
 EXPORT_SYMBOL_GPL(oslec_update);
 
-/* This function is seperated from the echo canceller is it is usually called
+/* This function is separated from the echo canceller is it is usually called
    as part of the tx process.  See rx HP (DC blocking) filter above, it's
    the same design.
 
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index 1143413..99c9362 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -322,7 +322,7 @@ struct rt_trigger_eventa {
 	u8 BSSID[6];
 	u8 RegClass;		/* Regulatory Class */
 	u16 Channel;
-	unsigned long CDCounter;	/* Maintain a seperate count down counter for each Event A. */
+	unsigned long CDCounter;	/* Maintain a separate count down counter for each Event A. */
 };
 
 /* 20/40 trigger event table */
diff --git a/drivers/staging/rtl8192e/ieee80211.h b/drivers/staging/rtl8192e/ieee80211.h
index c39249e..e1f03d7 100644
--- a/drivers/staging/rtl8192e/ieee80211.h
+++ b/drivers/staging/rtl8192e/ieee80211.h
@@ -1846,7 +1846,7 @@ struct ieee80211_device {
 	spinlock_t bw_spinlock;
 
 	spinlock_t reorder_spinlock;
-	// for HT operation rate set.  we use this one for HT data rate to seperate different descriptors
+	// for HT operation rate set.  we use this one for HT data rate to separate different descriptors
 	//the way fill this is the same as in the IE
 	u8	Regdot11HTOperationalRateSet[16];		//use RATR format
 	u8	dot11HTOperationalRateSet[16];		//use RATR format
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211.h b/drivers/staging/rtl8192e/ieee80211/ieee80211.h
index 1f613a2..50728f6 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211.h
@@ -2067,7 +2067,7 @@ struct ieee80211_device {
 	spinlock_t bw_spinlock;
 
 	spinlock_t reorder_spinlock;
-	// for HT operation rate set.  we use this one for HT data rate to seperate different descriptors
+	// for HT operation rate set.  we use this one for HT data rate to separate different descriptors
 	//the way fill this is the same as in the IE
 	u8	Regdot11HTOperationalRateSet[16];		//use RATR format
 	u8	dot11HTOperationalRateSet[16];		//use RATR format
diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c
index 1bd054d..7391f5f 100644
--- a/drivers/staging/rtl8192e/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192e/r8190_rtl8256.c
@@ -802,7 +802,7 @@ MgntDisconnectIBSS(
 
 			case RT_OP_MODE_IBSS:
 				btMsr |= MSR_LINK_ADHOC;
-				// led link set seperate
+				// led link set separate
 				break;
 
 			case RT_OP_MODE_AP:
@@ -885,7 +885,7 @@ MlmeDisassociateRequest(
 
 			case RT_OP_MODE_IBSS:
 				btMsr |= MSR_LINK_ADHOC;
-				// led link set seperate
+				// led link set separate
 				break;
 
 			case RT_OP_MODE_AP:
diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
index 533be48..eb41402 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -407,7 +407,7 @@ rtl8192e_SetHwReg(struct net_device *dev,u8 variable,u8* val)
 
 			case RT_OP_MODE_IBSS:
 				btMsr |= MSR_ADHOC;
-				// led link set seperate
+				// led link set separate
 				break;
 
 			case RT_OP_MODE_AP:
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
index 32b261d..bcb2b12 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
@@ -1152,7 +1152,7 @@ struct ieee80211_device {
 	spinlock_t reorder_spinlock;
 	/*
 	 * for HT operation rate set, we use this one for HT data rate to
-	 * seperate different descriptors the way fill this is the same as
+	 * separate different descriptors the way fill this is the same as
 	 * in the IE
 	 */
 	u8	Regdot11HTOperationalRateSet[16];	/* use RATR format */
diff --git a/drivers/staging/rtl8192su/r8192S_phy.c b/drivers/staging/rtl8192su/r8192S_phy.c
index 69ede47..b6c0f19 100644
--- a/drivers/staging/rtl8192su/r8192S_phy.c
+++ b/drivers/staging/rtl8192su/r8192S_phy.c
@@ -882,7 +882,7 @@ phy_BB8192S_Config_ParaFile(struct net_device* dev)
 
 	//
 	// 1. Read PHY_REG.TXT BB INIT!!
-	// We will seperate as 1T1R/1T2R/1T2R_GREEN/2T2R
+	// We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R
 	//
 	if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R ||
 	    priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN)
diff --git a/drivers/staging/rtl8192u/ieee80211.h b/drivers/staging/rtl8192u/ieee80211.h
index ef9e941..9c72611 100644
--- a/drivers/staging/rtl8192u/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211.h
@@ -1795,7 +1795,7 @@ struct ieee80211_device {
 
 	spinlock_t reorder_spinlock;
 	/* for HT operation rate set.  we use this one for HT data rate to
-	 * seperate different descriptors
+	 * separate different descriptors
 	 * the way fill this is the same as in the IE
 	 */
 	u8	Regdot11HTOperationalRateSet[16];		/* use RATR format */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index 39847c8..e1216b7 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -1829,7 +1829,7 @@ struct ieee80211_device {
 	spinlock_t bw_spinlock;
 
 	spinlock_t reorder_spinlock;
-	// for HT operation rate set.  we use this one for HT data rate to seperate different descriptors
+	// for HT operation rate set.  we use this one for HT data rate to separate different descriptors
 	//the way fill this is the same as in the IE
 	u8	Regdot11HTOperationalRateSet[16];		//use RATR format
 	u8	dot11HTOperationalRateSet[16];		//use RATR format
diff --git a/drivers/staging/wlags49_h2/README.wlags49 b/drivers/staging/wlags49_h2/README.wlags49
index 7586fd0..f65acd6 100644
--- a/drivers/staging/wlags49_h2/README.wlags49
+++ b/drivers/staging/wlags49_h2/README.wlags49
@@ -84,7 +84,7 @@ TABLE OF CONTENTS.
        the functions to interface to the Network Interface Card (NIC).  The HCF
        provides for all WaveLAN NIC types one standard interface to the MSF.
        This I/F is called the Wireless Connection Interface (WCI) and is the
-       subject of a seperate document (025726).
+       subject of a separate document (025726).
 
     The HCF directory contains firmware images to allow the card to operate in
     either station (STA) or Access Point (AP) mode. In the build process, the
diff --git a/drivers/staging/wlags49_h2/wl_priv.c b/drivers/staging/wlags49_h2/wl_priv.c
index f2bfd30..260d4f0 100644
--- a/drivers/staging/wlags49_h2/wl_priv.c
+++ b/drivers/staging/wlags49_h2/wl_priv.c
@@ -654,7 +654,7 @@ int wvlan_uil_put_info( struct uilreq *urq, struct wl_private *lp )
 					pLtv->u.u16[0]  = CNV_INT_TO_LITTLE( pLtv->u.u16[0] );
 					break;
 				/* CFG_CNF_OWN_SSID currently same as CNF_DESIRED_SSID. Do we
-				   need seperate storage for this? */
+				   need separate storage for this? */
 				//case CFG_CNF_OWN_SSID:
 				case CFG_CNF_OWN_ATIM_WINDOW:
 					lp->atimWindow  = pLtv->u.u16[0];
diff --git a/drivers/staging/wlags49_h2/wl_wext.c b/drivers/staging/wlags49_h2/wl_wext.c
index 4434e00..311d3c5 100644
--- a/drivers/staging/wlags49_h2/wl_wext.c
+++ b/drivers/staging/wlags49_h2/wl_wext.c
@@ -3940,7 +3940,7 @@ void wl_wext_event_mic_failed( struct net_device *dev )
 	   MLME-MICHAELMICFAILURE.indication(keyid=# broadcast/unicast addr=addr2)
    */
 
-	/* NOTE: Format of MAC address (using colons to seperate bytes) may cause
+	/* NOTE: Format of MAC address (using colons to separate bytes) may cause
 			 a problem in future versions of the supplicant, if they ever
 			 actually parse these parameters */
 #if DBG
-- 
1.7.0.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel

[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux