From: Mark <reodge@xxxxxxxxx>
This patch fixes quite a few long line lengths in comedi.h as reported by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/comedi/comedi.h | 62 +++++++++++++++++++++-----------------
1 files changed, 34 insertions(+), 28 deletions(-)
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index 20a6fee..1538146 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -156,15 +156,15 @@
#define TRIG_ANY 0xffffffff
#define TRIG_INVALID 0x00000000
-#define TRIG_NONE 0x00000001 /* never trigger */
-#define TRIG_NOW 0x00000002 /* trigger now + N ns */
-#define TRIG_FOLLOW 0x00000004 /* trigger on next lower level trig */
-#define TRIG_TIME 0x00000008 /* trigger at time N ns */
-#define TRIG_TIMER 0x00000010 /* trigger at rate N ns */
-#define TRIG_COUNT 0x00000020 /* trigger when count reaches N */
-#define TRIG_EXT 0x00000040 /* trigger on external signal N */
-#define TRIG_INT 0x00000080 /* trigger on comedi-internal signal N */
-#define TRIG_OTHER 0x00000100 /* driver defined */
+#define TRIG_NONE 0x00000001 /* never trigger */
+#define TRIG_NOW 0x00000002 /* trigger now + N ns */
+#define TRIG_FOLLOW 0x00000004 /* trigger on next lower level trig */
+#define TRIG_TIME 0x00000008 /* trigger at time N ns */
+#define TRIG_TIMER 0x00000010 /* trigger at rate N ns */
+#define TRIG_COUNT 0x00000020 /* trigger when count reaches N */
+#define TRIG_EXT 0x00000040 /* trigger on external signal N */
+#define TRIG_INT 0x00000080 /* trigger on comedi-internal signal N */
+#define TRIG_OTHER 0x00000100 /* driver defined */
/* subdevice flags */
@@ -181,14 +181,17 @@
#define SDF_MODE3 0x0400 /* can do mode 3 */
#define SDF_MODE4 0x0800 /* can do mode 4 */
#define SDF_CMD 0x1000 /* can do commands (deprecated) */
-#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */
-#define SDF_CMD_WRITE 0x4000 /* can do output commands */
-#define SDF_CMD_READ 0x8000 /* can do input commands */
-
-#define SDF_READABLE 0x00010000 /* subdevice can be read (e.g. analog input) */
-#define SDF_WRITABLE 0x00020000 /* subdevice can be written (e.g. analog output) */
+#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */
+#define SDF_CMD_WRITE 0x4000 /* can do output commands */
+#define SDF_CMD_READ 0x8000 /* can do input commands */
+
+/* subdevice can be read (e.g. analog input) */
+#define SDF_READABLE 0x00010000
+/* subdevice can be written (e.g. analog output) */
+#define SDF_WRITABLE 0x00020000
#define SDF_WRITEABLE SDF_WRITABLE /* spelling error in API */
-#define SDF_INTERNAL 0x00040000 /* subdevice does not have externally visible lines */
+/* subdevice does not have externally visible lines */
+#define SDF_INTERNAL 0x00040000
#define SDF_GROUND 0x00100000 /* can do aref=ground */
#define SDF_COMMON 0x00200000 /* can do aref=common */
#define SDF_DIFF 0x00400000 /* can do aref=diff */
@@ -255,15 +258,14 @@
INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003,
INSN_CONFIG_SET_GATE_SRC = 2001, /* Set gate source */
INSN_CONFIG_GET_GATE_SRC = 2002, /* Get gate source */
- INSN_CONFIG_SET_CLOCK_SRC = 2003, /* Set master clock source */
- INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */
- INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */
+ /* Set master clock source */
+ INSN_CONFIG_SET_CLOCK_SRC = 2003,
+ INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */
+ INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */
/* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */
- INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006, /* Get size in bytes of
- subdevice's on-board
- fifos used during
- streaming
- input/output */
+ /* Get size in bytes of subdevice's on-board fifos used during
+ * streaming input/output */
+ INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006,
INSN_CONFIG_SET_COUNTER_MODE = 4097,
INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE, /* deprecated */
INSN_CONFIG_8254_READ_STATUS = 4098,
@@ -273,8 +275,11 @@
INSN_CONFIG_PWM_SET_PERIOD = 5000, /* sets frequency */
INSN_CONFIG_PWM_GET_PERIOD = 5001, /* gets frequency */
INSN_CONFIG_GET_PWM_STATUS = 5002, /* is it running? */
- INSN_CONFIG_PWM_SET_H_BRIDGE = 5003, /* sets H bridge: duty cycle and sign bit for a relay at the same time */
- INSN_CONFIG_PWM_GET_H_BRIDGE = 5004 /* gets H bridge data: duty cycle and the sign bit */
+ /* sets H bridge: duty cycle and sign bit for a relay at the
+ * same time */
+ INSN_CONFIG_PWM_SET_H_BRIDGE = 5003,
+ /* gets H bridge data: duty cycle and the sign bit */
+ INSN_CONFIG_PWM_GET_H_BRIDGE = 5004
};
enum comedi_io_direction {
@@ -362,7 +367,7 @@
unsigned int __user *chanlist; /* channel/range list */
unsigned int chanlist_len;
- short __user *data; /* data list, size depends on subd flags */
+ short __user *data; /* data list, size depends on subd flags */
unsigned int data_len;
};
@@ -395,7 +400,8 @@
unsigned int flags; /* channel flags */
unsigned int range_type; /* lookup in kernel */
unsigned int settling_time_0;
- unsigned insn_bits_support; /* see support_level enum for values */
+ /* see support_level enum for values */
+ unsigned insn_bits_support;
unsigned int unused[8];
};
--
1.7.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
