From: Florian Schilhabel <florian.c.schilhabel@xxxxxxxxxxxxxx>
all rtl8192su chips have the 93c46 eprom. (no 93c56)
it it theoretically safe to remove the 93c56 definitions and some unneeded code.
if your device stops working after this patch, please send me a mail
and include some information about your device:
* dmesg
* lsusb -v
* _exact_ chipset (version)
* vendor
* everything else, that may help
plus cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/rtl8192su/r8192S_phy.c | 7 +-
drivers/staging/rtl8192su/r8192U.h | 8 +--
drivers/staging/rtl8192su/r8192U_core.c | 150 +++++++++----------------------
3 files changed, 45 insertions(+), 120 deletions(-)
diff --git a/drivers/staging/rtl8192su/r8192S_phy.c b/drivers/staging/rtl8192su/r8192S_phy.c
index 83c8aaa..69ede47 100644
--- a/drivers/staging/rtl8192su/r8192S_phy.c
+++ b/drivers/staging/rtl8192su/r8192S_phy.c
@@ -1873,10 +1873,9 @@ PHY_GetTxPowerLevel8192S(
if(priv->bTXPowerDataReadFromEEPORM == FALSE)
return;
- //
- // Read predefined TX power index in EEPROM
- //
-// if(priv->epromtype == EPROM_93c46)
+ /*
+ * Read predefined TX power index in EEPROM
+ */
{
//
// Mainly we use RF-A Tx Power to write the Tx Power registers, but the RF-B Tx
diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h
index 8306252..4112e14 100644
--- a/drivers/staging/rtl8192su/r8192U.h
+++ b/drivers/staging/rtl8192su/r8192U.h
@@ -741,11 +741,6 @@ typedef enum _RTL8192SUSB_LOOPBACK{
#define RSVD_FW_QUEUE_PAGE_CMD_SHIFT 0x08
#define RSVD_FW_QUEUE_PAGE_BCN_SHIFT 0x00
#define RSVD_FW_QUEUE_PAGE_PUB_SHIFT 0x08
-//=================================================================
-//=================================================================
-
-#define EPROM_93c46 0
-#define EPROM_93c56 1
#define DEFAULT_FRAG_THRESHOLD 2342U
#define MIN_FRAG_THRESHOLD 256U
@@ -1129,8 +1124,7 @@ typedef struct r8192_priv
{
struct rtl819x_ops* ops;
struct usb_device *udev;
- //added for maintain info from eeprom
- short epromtype;
+ /* added for maintain info from eeprom */
u16 eeprom_vid;
u16 eeprom_pid;
u8 eeprom_CustomerID;
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index 5696b00..d372ff2 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -3309,18 +3309,6 @@ static void rtl8192_init_priv_task(struct net_device* dev)
(unsigned long)priv);
}
-static void rtl8192_get_eeprom_size(struct net_device* dev)
-{
- u16 curCR = 0;
- struct r8192_priv *priv = ieee80211_priv(dev);
- RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
- curCR = read_nic_word_E(dev,EPROM_CMD);
- RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR);
- //whether need I consider BIT5?
- priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46;
- RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __FUNCTION__, priv->epromtype);
-}
-
//used to swap endian. as ntohl & htonl are not neccessary to swap endian, so use this instead.
static inline u16 endian_swap(u16* data)
{
@@ -3523,46 +3511,40 @@ void rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device *dev)
RT_TRACE(COMP_INIT, "<==== ConfigAdapterInfo8192SForAutoLoadFail\n");
}
-//
-// Description:
-// Read HW adapter information by E-Fuse or EEPROM according CR9346 reported.
-//
-// Assumption:
-// 1. CR9346 regiser has verified.
-// 2. PASSIVE_LEVEL (USB interface)
-//
-// Created by Roger, 2008.10.21.
-//
-void rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev)
+/*
+ * Description:
+ * Read HW adapter information by E-Fuse
+ * or EEPROM according CR9346 reported.
+ *
+ * Assumption:
+ * 1. CR9346 regiser has verified.
+ * 2. PASSIVE_LEVEL (USB interface)
+ */
+void rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u16 i;
u8 tmpU1b, tempval;
u16 EEPROMId;
u8 hwinfo[HWSET_MAX_SIZE_92S];
- u8 rf_path, index; // For EEPROM/EFUSE After V0.6_1117
+ u8 rf_path, index; /* For EEPROM/EFUSE After V0.6_1117 */
struct eeprom_93cx6 eeprom;
u16 eeprom_val;
eeprom.data = dev;
eeprom.register_read = rtl819x_eeprom_register_read;
eeprom.register_write = rtl819x_eeprom_register_write;
- if (priv->epromtype == EPROM_93c46)
- eeprom.width = PCI_EEPROM_WIDTH_93C46;
- else
- eeprom.width = PCI_EEPROM_WIDTH_93C56;
-
- RT_TRACE(COMP_INIT, "====> ReadAdapterInfo8192SUsb\n");
+ eeprom.width = PCI_EEPROM_WIDTH_93C46;
/*
- * The following operation are prevent Efuse leakage by turn on 2.5V..
+ * The following operation are prevent Efuse leakage by turn on 2.5V.
*/
tmpU1b = read_nic_byte(dev, EFUSE_TEST+3);
write_nic_byte(dev, EFUSE_TEST+3, tmpU1b|0x80);
mdelay(10);
write_nic_byte(dev, EFUSE_TEST+3, (tmpU1b&(~BIT7)));
- // Retrieve Chip version.
+ /* Retrieve Chip version. */
priv->card_8192_version = (VERSION_8192S)((read_nic_dword(dev, PMC_FSM)>>16)&0xF);
RT_TRACE(COMP_INIT, "Chip Version ID: 0x%2x\n", priv->card_8192_version);
@@ -3582,103 +3564,59 @@ void rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev)
break;
}
- //if (IS_BOOT_FROM_EEPROM(Adapter))
- if(priv->EepromOrEfuse)
- { // Read frin EEPROM
- write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
- //PlatformStallExecution(10000);
+ if (priv->EepromOrEfuse) { /* Read from EEPROM */
+ /* Isolation signals from Loader */
+ write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8);
mdelay(10);
- write_nic_byte(dev, PMC_FSM, 0x02); // Enable Loader Data Keep
- // Read all Content from EEPROM or EFUSE.
- for(i = 0; i < HWSET_MAX_SIZE_92S; i += 2)
- {
+ /* Enable Loader Data Keep */
+ write_nic_byte(dev, PMC_FSM, 0x02);
+ /* Read all Content from EEPROM or EFUSE. */
+ for (i = 0; i < HWSET_MAX_SIZE_92S; i += 2) {
eeprom_93cx6_read(&eeprom, (u16) (i>>1), &eeprom_val);
*((u16 *)(&hwinfo[i])) = eeprom_val;
}
- }
- else if (!(priv->EepromOrEfuse))
- { // Read from EFUSE
-
- //
- // <Roger_Notes> We set Isolation signals from Loader and reset EEPROM after system resuming
- // from suspend mode.
- // 2008.10.21.
- //
- //PlatformEFIOWrite1Byte(Adapter, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
- //PlatformStallExecution(10000);
- //PlatformEFIOWrite1Byte(Adapter, SYS_FUNC_EN+1, 0x40);
- //PlatformEFIOWrite1Byte(Adapter, SYS_FUNC_EN+1, 0x50);
-
- //tmpU1b = PlatformEFIORead1Byte(Adapter, EFUSE_TEST+3);
- //PlatformEFIOWrite1Byte(Adapter, EFUSE_TEST+3, (tmpU1b | 0x80));
- //PlatformEFIOWrite1Byte(Adapter, EFUSE_TEST+3, 0x72);
- //PlatformEFIOWrite1Byte(Adapter, EFUSE_CLK, 0x03);
-
- // Read EFUSE real map to shadow.
+ } else if (!(priv->EepromOrEfuse)) { /* Read from EFUSE */
+ /* Read EFUSE real map to shadow. */
EFUSE_ShadowMapUpdate(dev);
memcpy(hwinfo, &priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
+ } else {
+ RT_TRACE(COMP_INIT, "%s(): Invalid boot type", __func__);
}
- else
- {
- RT_TRACE(COMP_INIT, "ReadAdapterInfo8192SUsb(): Invalid boot type!!\n");
- }
-
- //YJ,test,090106
- //dump_buf(hwinfo,HWSET_MAX_SIZE_92S);
- //
- // <Roger_Notes> The following are EFUSE/EEPROM independent operations!!
- //
- //RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("MAP: \n"), hwinfo, HWSET_MAX_SIZE_92S);
- //
- // <Roger_Notes> Event though CR9346 regiser can verify whether Autoload is success or not, but we still
- // double check ID codes for 92S here(e.g., due to HW GPIO polling fail issue).
- // 2008.10.21.
- //
+ /*
+ * Even though CR9346 regiser can verify whether Autoload
+ * is success or not, but we still double check ID codes for 92S here
+ * (e.g., due to HW GPIO polling fail issue)
+ */
EEPROMId = *((u16 *)&hwinfo[0]);
-
- if( EEPROMId != RTL8190_EEPROM_ID )
- {
+ if (EEPROMId != RTL8190_EEPROM_ID) {
RT_TRACE(COMP_INIT, "ID(%#x) is invalid!!\n", EEPROMId);
priv->bTXPowerDataReadFromEEPORM = FALSE;
priv->AutoloadFailFlag=TRUE;
- }
- else
- {
+ } else {
priv->AutoloadFailFlag=FALSE;
priv->bTXPowerDataReadFromEEPORM = TRUE;
}
- // Read IC Version && Channel Plan
- if(!priv->AutoloadFailFlag)
- {
- // VID, PID
+ /* Read IC Version && Channel Plan */
+ if (!priv->AutoloadFailFlag) {
+ /* VID, PID */
priv->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
priv->eeprom_pid = *(u16 *)&hwinfo[EEPROM_PID];
priv->bIgnoreDiffRateTxPowerOffset = false; //cosa for test
- // EEPROM Version ID, Channel plan
+ /* EEPROM Version ID, Channel plan */
priv->EEPROMVersion = *(u8 *)&hwinfo[EEPROM_Version];
priv->eeprom_ChannelPlan = *(u8 *)&hwinfo[EEPROM_ChannelPlan];
- // Customer ID, 0x00 and 0xff are reserved for Realtek.
+ /* Customer ID, 0x00 and 0xff are reserved for Realtek. */
priv->eeprom_CustomerID = *(u8 *)&hwinfo[EEPROM_CustomID];
priv->eeprom_SubCustomerID = *(u8 *)&hwinfo[EEPROM_SubCustomID];
- }
- else
- {
- //priv->eeprom_vid = 0;
- //priv->eeprom_pid = 0;
- //priv->EEPROMVersion = 0;
- //priv->eeprom_ChannelPlan = 0;
- //priv->eeprom_CustomerID = 0;
- //priv->eeprom_SubCustomerID = 0;
-
+ } else {
rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(dev);
return;
}
-
RT_TRACE(COMP_INIT, "EEPROM Id = 0x%4x\n", EEPROMId);
RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
RT_TRACE(COMP_INIT, "EEPROM PID = 0x%4x\n", priv->eeprom_pid);
@@ -3688,18 +3626,13 @@ void rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev)
RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n", priv->eeprom_ChannelPlan);
RT_TRACE(COMP_INIT, "bIgnoreDiffRateTxPowerOffset = %d\n", priv->bIgnoreDiffRateTxPowerOffset);
-
- // Read USB optional function.
- if(!priv->AutoloadFailFlag)
- {
+ /* Read USB optional function. */
+ if (!priv->AutoloadFailFlag) {
priv->EEPROMUsbOption = *(u8 *)&hwinfo[EEPROM_USB_OPTIONAL];
- }
- else
- {
+ } else {
priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
}
-
priv->EEPROMUsbEndPointNumber = rtl8192SU_UsbOptionToEndPointNumber((priv->EEPROMUsbOption&EEPROM_EP_NUMBER)>>3);
RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
@@ -4138,7 +4071,6 @@ short rtl8192_init(struct net_device *dev)
rtl8192_init_priv_variable(dev);
rtl8192_init_priv_lock(priv);
rtl8192_init_priv_task(dev);
- rtl8192_get_eeprom_size(dev);
priv->ops->rtl819x_read_eeprom_info(dev);
rtl8192_get_channel_map(dev);
init_hal_dm(dev);
--
1.7.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
