From: Lars Lindley <lindley@xxxxxxxxxx>
I fixed all problems reported by checkpatch.pl except
some long lines. I also removed commented away code and
revision comments.
Checked for regressions with Dan Carpenters
strip_whitespace.pl and diff.
Signed-off-by: Lars Lindley <lindley@xxxxxxxxxx>
Acked-by: Pavel Machek <pavel@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/winbond/wb35reg_s.h | 221 +++++++++++++++++------------------
1 files changed, 110 insertions(+), 111 deletions(-)
diff --git a/drivers/staging/winbond/wb35reg_s.h b/drivers/staging/winbond/wb35reg_s.h
index 32ef4b8..4eff009 100644
--- a/drivers/staging/winbond/wb35reg_s.h
+++ b/drivers/staging/winbond/wb35reg_s.h
@@ -5,98 +5,100 @@
#include <linux/types.h>
#include <asm/atomic.h>
-//=======================================================================================
-/*
- HAL setting function
-
- ========================================
- |Uxx| |Dxx| |Mxx| |BB| |RF|
- ========================================
- | |
- Wb35Reg_Read Wb35Reg_Write
-
- ----------------------------------------
- WbUsb_CallUSBDASync supplied By WbUsb module
-*/
-//=======================================================================================
-
-#define GetBit( dwData, i) ( dwData & (0x00000001 << i))
-#define SetBit( dwData, i) ( dwData | (0x00000001 << i))
-#define ClearBit( dwData, i) ( dwData & ~(0x00000001 << i))
-
-#define IGNORE_INCREMENT 0
-#define AUTO_INCREMENT 0
-#define NO_INCREMENT 1
-#define REG_DIRECTION(_x,_y) ((_y)->DIRECT ==0 ? usb_rcvctrlpipe(_x,0) : usb_sndctrlpipe(_x,0))
-#define REG_BUF_SIZE(_x) ((_x)->bRequest== 0x04 ? cpu_to_le16((_x)->wLength) : 4)
-
-// 20060613.2 Add the follow definition
+/* =========================================================================
+ *
+ * HAL setting function
+ *
+ * ========================================
+ * |Uxx| |Dxx| |Mxx| |BB| |RF|
+ * ========================================
+ * | |
+ * Wb35Reg_Read Wb35Reg_Write
+ *
+ * ----------------------------------------
+ * WbUsb_CallUSBDASync supplied By WbUsb module
+ * ==========================================================================
+ */
+#define GetBit(dwData, i) (dwData & (0x00000001 << i))
+#define SetBit(dwData, i) (dwData | (0x00000001 << i))
+#define ClearBit(dwData, i) (dwData & ~(0x00000001 << i))
+
+#define IGNORE_INCREMENT 0
+#define AUTO_INCREMENT 0
+#define NO_INCREMENT 1
+#define REG_DIRECTION(_x, _y) ((_y)->DIRECT == 0 ? usb_rcvctrlpipe(_x, 0) : usb_sndctrlpipe(_x, 0))
+#define REG_BUF_SIZE(_x) ((_x)->bRequest == 0x04 ? cpu_to_le16((_x)->wLength) : 4)
+
#define BB48_DEFAULT_AL2230_11B 0x0033447c
#define BB4C_DEFAULT_AL2230_11B 0x0A00FEFF
#define BB48_DEFAULT_AL2230_11G 0x00332C1B
#define BB4C_DEFAULT_AL2230_11G 0x0A00FEFF
-#define BB48_DEFAULT_WB242_11B 0x00292315 //backoff 2dB
-#define BB4C_DEFAULT_WB242_11B 0x0800FEFF //backoff 2dB
-//#define BB48_DEFAULT_WB242_11B 0x00201B11 //backoff 4dB
-//#define BB4C_DEFAULT_WB242_11B 0x0600FF00 //backoff 4dB
+#define BB48_DEFAULT_WB242_11B 0x00292315 /* backoff 2dB */
+#define BB4C_DEFAULT_WB242_11B 0x0800FEFF /* backoff 2dB */
#define BB48_DEFAULT_WB242_11G 0x00453B24
#define BB4C_DEFAULT_WB242_11G 0x0E00FEFF
-//====================================
-// Default setting for Mxx
-//====================================
-#define DEFAULT_CWMIN 31 //(M2C) CWmin. Its value is in the range 0-31.
-#define DEFAULT_CWMAX 1023 //(M2C) CWmax. Its value is in the range 0-1023.
-#define DEFAULT_AID 1 //(M34) AID. Its value is in the range 1-2007.
+/*
+ * ====================================
+ * Default setting for Mxx
+ * ====================================
+ */
+#define DEFAULT_CWMIN 31 /* (M2C) CWmin. Its value is in the range 0-31. */
+#define DEFAULT_CWMAX 1023 /* (M2C) CWmax. Its value is in the range 0-1023. */
+#define DEFAULT_AID 1 /* (M34) AID. Its value is in the range 1-2007. */
#ifdef _USE_FALLBACK_RATE_
-#define DEFAULT_RATE_RETRY_LIMIT 2 //(M38) as named
+#define DEFAULT_RATE_RETRY_LIMIT 2 /* (M38) as named */
#else
-#define DEFAULT_RATE_RETRY_LIMIT 7 //(M38) as named
+#define DEFAULT_RATE_RETRY_LIMIT 7 /* (M38) as named */
#endif
-#define DEFAULT_LONG_RETRY_LIMIT 7 //(M38) LongRetryLimit. Its value is in the range 0-15.
-#define DEFAULT_SHORT_RETRY_LIMIT 7 //(M38) ShortRetryLimit. Its value is in the range 0-15.
-#define DEFAULT_PIFST 25 //(M3C) PIFS Time. Its value is in the range 0-65535.
-#define DEFAULT_EIFST 354 //(M3C) EIFS Time. Its value is in the range 0-1048575.
-#define DEFAULT_DIFST 45 //(M3C) DIFS Time. Its value is in the range 0-65535.
-#define DEFAULT_SIFST 5 //(M3C) SIFS Time. Its value is in the range 0-65535.
-#define DEFAULT_OSIFST 10 //(M3C) Original SIFS Time. Its value is in the range 0-15.
-#define DEFAULT_ATIMWD 0 //(M40) ATIM Window. Its value is in the range 0-65535.
-#define DEFAULT_SLOT_TIME 20 //(M40) ($) SlotTime. Its value is in the range 0-255.
-#define DEFAULT_MAX_TX_MSDU_LIFE_TIME 512 //(M44) MaxTxMSDULifeTime. Its value is in the range 0-4294967295.
-#define DEFAULT_BEACON_INTERVAL 500 //(M48) Beacon Interval. Its value is in the range 0-65535.
-#define DEFAULT_PROBE_DELAY_TIME 200 //(M48) Probe Delay Time. Its value is in the range 0-65535.
-#define DEFAULT_PROTOCOL_VERSION 0 //(M4C)
-#define DEFAULT_MAC_POWER_STATE 2 //(M4C) 2: MAC at power active
-#define DEFAULT_DTIM_ALERT_TIME 0
+#define DEFAULT_LONG_RETRY_LIMIT 7 /* (M38) LongRetryLimit. Its value is in the range 0-15. */
+#define DEFAULT_SHORT_RETRY_LIMIT 7 /* (M38) ShortRetryLimit. Its value is in the range 0-15. */
+#define DEFAULT_PIFST 25 /* (M3C) PIFS Time. Its value is in the range 0-65535. */
+#define DEFAULT_EIFST 354 /* (M3C) EIFS Time. Its value is in the range 0-1048575. */
+#define DEFAULT_DIFST 45 /* (M3C) DIFS Time. Its value is in the range 0-65535. */
+#define DEFAULT_SIFST 5 /* (M3C) SIFS Time. Its value is in the range 0-65535. */
+#define DEFAULT_OSIFST 10 /* (M3C) Original SIFS Time. Its value is in the range 0-15. */
+#define DEFAULT_ATIMWD 0 /* (M40) ATIM Window. Its value is in the range 0-65535. */
+#define DEFAULT_SLOT_TIME 20 /* (M40) ($) SlotTime. Its value is in the range 0-255. */
+#define DEFAULT_MAX_TX_MSDU_LIFE_TIME 512 /* (M44) MaxTxMSDULifeTime. Its value is in the range 0-4294967295. */
+#define DEFAULT_BEACON_INTERVAL 500 /* (M48) Beacon Interval. Its value is in the range 0-65535. */
+#define DEFAULT_PROBE_DELAY_TIME 200 /* (M48) Probe Delay Time. Its value is in the range 0-65535. */
+#define DEFAULT_PROTOCOL_VERSION 0 /* (M4C) */
+#define DEFAULT_MAC_POWER_STATE 2 /* (M4C) 2: MAC at power active */
+#define DEFAULT_DTIM_ALERT_TIME 0
struct wb35_reg_queue {
- struct urb *urb;
+ struct urb *urb;
void *pUsbReq;
void *Next;
union {
u32 VALUE;
u32 *pBuffer;
};
- u8 RESERVED[4]; // space reserved for communication
- u16 INDEX; // For storing the register index
- u8 RESERVED_VALID; // Indicate whether the RESERVED space is valid at this command.
- u8 DIRECT; // 0:In 1:Out
+ u8 RESERVED[4]; /* space reserved for communication */
+ u16 INDEX; /* For storing the register index */
+ u8 RESERVED_VALID; /* Indicate whether the RESERVED space is valid at this command. */
+ u8 DIRECT; /* 0:In 1:Out */
};
-//====================================
-// Internal variable for module
-//====================================
+/*
+ * ====================================
+ * Internal variable for module
+ * ====================================
+ */
#define MAX_SQ3_FILTER_SIZE 5
struct wb35_reg {
- //============================
- // Register Bank backup
- //============================
- u32 U1B0; //bit16 record the h/w radio on/off status
+ /*
+ * ============================
+ * Register Bank backup
+ * ============================
+ */
+ u32 U1B0; /* bit16 record the h/w radio on/off status */
u32 U1BC_LEDConfigure;
u32 D00_DmaControl;
u32 M00_MacControl;
@@ -105,68 +107,65 @@ struct wb35_reg {
u32 M04_MulticastAddress1;
u32 M08_MulticastAddress2;
};
- u8 Multicast[8]; // contents of card multicast registers
+ u8 Multicast[8]; /* contents of card multicast registers */
};
u32 M24_MacControl;
u32 M28_MacControl;
u32 M2C_MacControl;
u32 M38_MacControl;
- u32 M3C_MacControl; // 20060214 backup only
+ u32 M3C_MacControl;
u32 M40_MacControl;
- u32 M44_MacControl; // 20060214 backup only
- u32 M48_MacControl; // 20060214 backup only
+ u32 M44_MacControl;
+ u32 M48_MacControl;
u32 M4C_MacStatus;
- u32 M60_MacControl; // 20060214 backup only
- u32 M68_MacControl; // 20060214 backup only
- u32 M70_MacControl; // 20060214 backup only
- u32 M74_MacControl; // 20060214 backup only
- u32 M78_ERPInformation;//930206.2.b
- u32 M7C_MacControl; // 20060214 backup only
- u32 M80_MacControl; // 20060214 backup only
- u32 M84_MacControl; // 20060214 backup only
- u32 M88_MacControl; // 20060214 backup only
- u32 M98_MacControl; // 20060214 backup only
-
- //[20040722 WK]
- //Baseband register
- u32 BB0C; // Used for LNA calculation
- u32 BB2C; //
- u32 BB30; //11b acquisition control register
+ u32 M60_MacControl;
+ u32 M68_MacControl;
+ u32 M70_MacControl;
+ u32 M74_MacControl;
+ u32 M78_ERPInformation;
+ u32 M7C_MacControl;
+ u32 M80_MacControl;
+ u32 M84_MacControl;
+ u32 M88_MacControl;
+ u32 M98_MacControl;
+
+ /* Baseband register */
+ u32 BB0C; /* Used for LNA calculation */
+ u32 BB2C;
+ u32 BB30; /* 11b acquisition control register */
u32 BB3C;
- u32 BB48; // 20051221.1.a 20060613.1 Fix OBW issue of 11b/11g rate
- u32 BB4C; // 20060613.1 Fix OBW issue of 11b/11g rate
- u32 BB50; //mode control register
+ u32 BB48;
+ u32 BB4C;
+ u32 BB50; /* mode control register */
u32 BB54;
- u32 BB58; //IQ_ALPHA
- u32 BB5C; // For test
- u32 BB60; // for WTO read value
-
- //-------------------
- // VM
- //-------------------
- spinlock_t EP0VM_spin_lock; // 4B
- u32 EP0VM_status;//$$
+ u32 BB58; /* IQ_ALPHA */
+ u32 BB5C; /* For test */
+ u32 BB60; /* for WTO read value */
+
+ /* VM */
+ spinlock_t EP0VM_spin_lock; /* 4B */
+ u32 EP0VM_status; /* $$ */
struct wb35_reg_queue *reg_first;
struct wb35_reg_queue *reg_last;
- atomic_t RegFireCount;
+ atomic_t RegFireCount;
- // Hardware status
+ /* Hardware status */
u8 EP0vm_state;
u8 mac_power_save;
- u8 EEPROMPhyType; // 0 ~ 15 for Maxim (0 Ä?V MAX2825, 1 Ä?V MAX2827, 2 Ä?V MAX2828, 3 Ä?V MAX2829),
- // 16 ~ 31 for Airoha (16 Ä?V AL2230, 11 - AL7230)
- // 32 ~ Reserved
- // 33 ~ 47 For WB242 ( 33 - WB242, 34 - WB242 with new Txvga 0.5 db step)
- // 48 ~ 255 ARE RESERVED.
- u8 EEPROMRegion; //Region setting in EEPROM
-
- u32 SyncIoPause; // If user use the Sync Io to access Hw, then pause the async access
-
- u8 LNAValue[4]; //Table for speed up running
+ u8 EEPROMPhyType; /*
+ * 0 ~ 15 for Maxim (0 Ä?V MAX2825, 1 Ä?V MAX2827, 2 Ä?V MAX2828, 3 Ä?V MAX2829),
+ * 16 ~ 31 for Airoha (16 Ä?V AL2230, 11 - AL7230)
+ * 32 ~ Reserved
+ * 33 ~ 47 For WB242 ( 33 - WB242, 34 - WB242 with new Txvga 0.5 db step)
+ * 48 ~ 255 ARE RESERVED.
+ */
+ u8 EEPROMRegion; /* Region setting in EEPROM */
+
+ u32 SyncIoPause; /* If user use the Sync Io to access Hw, then pause the async access */
+
+ u8 LNAValue[4]; /* Table for speed up running */
u32 SQ3_filter[MAX_SQ3_FILTER_SIZE];
u32 SQ3_index;
-
};
-
#endif
--
1.7.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
