From: Jason Baldus <jason.baldus@xxxxxxxxx>
This is a patch to the dt3155_drv.c file that removes spaces after open
parentheses and brackets and before close parentheses and brackets.
Signed-off-by: Jason Baldus <jason.baldus@xxxxxxxxx>
Reviewed-by: Simon Horman <horms@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/dt3155/dt3155_drv.c | 338 +++++++++++++++++-----------------
1 files changed, 169 insertions(+), 169 deletions(-)
diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
index 7e6095f..91ebfad 100644
--- a/drivers/staging/dt3155/dt3155_drv.c
+++ b/drivers/staging/dt3155/dt3155_drv.c
@@ -95,7 +95,7 @@ int dt3155_errno = 0;
#endif
/* wait queue for interrupts */
-wait_queue_head_t dt3155_read_wait_queue[ MAXBOARDS ];
+wait_queue_head_t dt3155_read_wait_queue[MAXBOARDS];
#define DT_3155_SUCCESS 0
#define DT_3155_FAILURE -EIO
@@ -112,10 +112,10 @@ int dt3155_major = 0;
/* Global structures and variables */
/* Status of each device */
-struct dt3155_status_s dt3155_status[ MAXBOARDS ];
+struct dt3155_status_s dt3155_status[MAXBOARDS];
/* kernel logical address of the board */
-u8 *dt3155_lbase[ MAXBOARDS ] = { NULL
+u8 *dt3155_lbase[MAXBOARDS] = { NULL
#if MAXBOARDS == 2
, NULL
#endif
@@ -123,7 +123,7 @@ u8 *dt3155_lbase[ MAXBOARDS ] = { NULL
/* DT3155 registers */
u8 *dt3155_bbase = NULL; /* kernel logical address of the *
* buffer region */
-u32 dt3155_dev_open[ MAXBOARDS ] = {0
+u32 dt3155_dev_open[MAXBOARDS] = {0
#if MAXBOARDS == 2
, 0
#endif
@@ -142,17 +142,17 @@ static void quick_stop (int minor)
{
// TODO: scott was here
#if 1
- ReadMReg((dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg);
+ ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* disable interrupts */
int_csr_r.fld.FLD_END_EVE_EN = 0;
int_csr_r.fld.FLD_END_ODD_EN = 0;
- WriteMReg((dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
+ WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
- dt3155_status[ minor ].state &= ~(DT3155_STATE_STOP|0xff);
+ dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
/* mark the system stopped: */
- dt3155_status[ minor ].state |= DT3155_STATE_IDLE;
- dt3155_fbuffer[ minor ]->stop_acquire = 0;
- dt3155_fbuffer[ minor ]->even_stopped = 0;
+ dt3155_status[minor].state |= DT3155_STATE_IDLE;
+ dt3155_fbuffer[minor]->stop_acquire = 0;
+ dt3155_fbuffer[minor]->even_stopped = 0;
#else
dt3155_status[minor].state |= DT3155_STATE_STOP;
dt3155_status[minor].fbuffer.stop_acquire = 1;
@@ -168,7 +168,7 @@ static void quick_stop (int minor)
* - Assumes irq's are disabled, via SA_INTERRUPT flag
* being set in request_irq() call from init_module()
*****************************************************/
-static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
+static inline void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
{
int minor = -1;
int index;
@@ -176,8 +176,8 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
u32 buffer_addr;
/* find out who issued the interrupt */
- for ( index = 0; index < ndevices; index++ ) {
- if( dev_id == (void*) &dt3155_status[ index ])
+ for (index = 0; index < ndevices; index++) {
+ if(dev_id == (void*) &dt3155_status[index])
{
minor = index;
break;
@@ -185,15 +185,15 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
}
/* hopefully we should not get here */
- if ( minor < 0 || minor >= MAXBOARDS ) {
+ if (minor < 0 || minor >= MAXBOARDS) {
printk(KERN_ERR "dt3155_isr called with invalid dev_id\n");
return;
}
/* Check for corruption and set a flag if so */
- ReadMReg( (dt3155_lbase[ minor ] + CSR1), csr1_r.reg );
+ ReadMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
- if ( (csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD) )
+ if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD))
{
/* TODO: this should probably stop acquisition */
/* and set some flags so that dt3155_read */
@@ -203,27 +203,27 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
return;
}
- ReadMReg((dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg);
+ ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* Handle the even field ... */
if (int_csr_r.fld.FLD_END_EVE)
{
- if ( (dt3155_status[ minor ].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD )
+ if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
+ DT3155_STATE_FLD)
{
- dt3155_fbuffer[ minor ]->frame_count++;
+ dt3155_fbuffer[minor]->frame_count++;
}
- ReadI2C(dt3155_lbase[ minor ], EVEN_CSR, &i2c_even_csr.reg);
+ ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
/* Clear the interrupt? */
int_csr_r.fld.FLD_END_EVE = 1;
/* disable the interrupt if last field */
- if (dt3155_fbuffer[ minor ]->stop_acquire)
+ if (dt3155_fbuffer[minor]->stop_acquire)
{
printk("dt3155: even stopped.\n");
- dt3155_fbuffer[ minor ]->even_stopped = 1;
+ dt3155_fbuffer[minor]->even_stopped = 1;
if (i2c_even_csr.fld.SNGL_EVE)
{
int_csr_r.fld.FLD_END_EVE_EN = 0;
@@ -234,75 +234,75 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
}
}
- WriteMReg( (dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
+ WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* Set up next DMA if we are doing FIELDS */
- if ( (dt3155_status[ minor ].state & DT3155_STATE_MODE ) ==
+ if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
DT3155_STATE_FLD)
{
/* GCS (Aug 2, 2002) -- In field mode, dma the odd field
into the lower half of the buffer */
- const u32 stride = dt3155_status[ minor ].config.cols;
- buffer_addr = dt3155_fbuffer[ minor ]->
- frame_info[ dt3155_fbuffer[ minor ]->active_buf ].addr
+ const u32 stride = dt3155_status[minor].config.cols;
+ buffer_addr = dt3155_fbuffer[minor]->
+ frame_info[dt3155_fbuffer[minor]->active_buf].addr
+ (DT3155_MAX_ROWS / 2) * stride;
local_save_flags(flags);
local_irq_disable();
- wake_up_interruptible( &dt3155_read_wait_queue[ minor ] );
+ wake_up_interruptible(&dt3155_read_wait_queue[minor]);
/* Set up the DMA address for the next field */
local_irq_restore(flags);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_START), buffer_addr);
+ WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr);
}
/* Check for errors. */
i2c_even_csr.fld.DONE_EVE = 1;
- if ( i2c_even_csr.fld.ERROR_EVE )
+ if (i2c_even_csr.fld.ERROR_EVE)
dt3155_errno = DT_ERR_OVERRUN;
- WriteI2C( dt3155_lbase[ minor ], EVEN_CSR, i2c_even_csr.reg );
+ WriteI2C(dt3155_lbase[minor], EVEN_CSR, i2c_even_csr.reg);
/* Note that we actually saw an even field meaning */
/* that subsequent odd field complete the frame */
- dt3155_fbuffer[ minor ]->even_happened = 1;
+ dt3155_fbuffer[minor]->even_happened = 1;
/* recording the time that the even field finished, this should be */
/* about time in the middle of the frame */
- do_gettimeofday( &(dt3155_fbuffer[ minor ]->
- frame_info[ dt3155_fbuffer[ minor ]->
- active_buf ].time) );
+ do_gettimeofday(&(dt3155_fbuffer[minor]->
+ frame_info[dt3155_fbuffer[minor]->
+ active_buf].time));
return;
}
/* ... now handle the odd field */
- if ( int_csr_r.fld.FLD_END_ODD )
+ if (int_csr_r.fld.FLD_END_ODD)
{
- ReadI2C( dt3155_lbase[ minor ], ODD_CSR, &i2c_odd_csr.reg );
+ ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
/* Clear the interrupt? */
int_csr_r.fld.FLD_END_ODD = 1;
- if (dt3155_fbuffer[ minor ]->even_happened ||
- (dt3155_status[ minor ].state & DT3155_STATE_MODE) ==
+ if (dt3155_fbuffer[minor]->even_happened ||
+ (dt3155_status[minor].state & DT3155_STATE_MODE) ==
DT3155_STATE_FLD)
{
- dt3155_fbuffer[ minor ]->frame_count++;
+ dt3155_fbuffer[minor]->frame_count++;
}
- if ( dt3155_fbuffer[ minor ]->stop_acquire &&
- dt3155_fbuffer[ minor ]->even_stopped )
+ if (dt3155_fbuffer[minor]->stop_acquire &&
+ dt3155_fbuffer[minor]->even_stopped)
{
printk(KERN_DEBUG "dt3155: stopping odd..\n");
- if ( i2c_odd_csr.fld.SNGL_ODD )
+ if (i2c_odd_csr.fld.SNGL_ODD)
{
/* disable interrupts */
int_csr_r.fld.FLD_END_ODD_EN = 0;
- dt3155_status[ minor ].state &= ~(DT3155_STATE_STOP|0xff);
+ dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
/* mark the system stopped: */
- dt3155_status[ minor ].state |= DT3155_STATE_IDLE;
- dt3155_fbuffer[ minor ]->stop_acquire = 0;
- dt3155_fbuffer[ minor ]->even_stopped = 0;
+ dt3155_status[minor].state |= DT3155_STATE_IDLE;
+ dt3155_fbuffer[minor]->stop_acquire = 0;
+ dt3155_fbuffer[minor]->even_stopped = 0;
printk(KERN_DEBUG "dt3155: state is now %x\n",
dt3155_status[minor].state);
@@ -313,104 +313,104 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
}
}
- WriteMReg( (dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
+ WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* if the odd field has been acquired, then */
/* change the next dma location for both fields */
/* and wake up the process if sleeping */
- if ( dt3155_fbuffer[ minor ]->even_happened ||
- (dt3155_status[ minor ].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD )
+ if (dt3155_fbuffer[minor]->even_happened ||
+ (dt3155_status[minor].state & DT3155_STATE_MODE) ==
+ DT3155_STATE_FLD)
{
local_save_flags(flags);
local_irq_disable();
#ifdef DEBUG_QUES_B
- printques( minor );
+ printques(minor);
#endif
- if ( dt3155_fbuffer[ minor ]->nbuffers > 2 )
+ if (dt3155_fbuffer[minor]->nbuffers > 2)
{
- if ( !are_empty_buffers( minor ) )
+ if (!are_empty_buffers(minor))
{
/* The number of active + locked buffers is
* at most 2, and since there are none empty, there
* must be at least nbuffers-2 ready buffers.
* This is where we 'drop frames', oldest first. */
- push_empty( pop_ready( minor ), minor );
+ push_empty(pop_ready(minor), minor);
}
/* The ready_que can't be full, since we know
* there is one active buffer right now, so it's safe
* to push the active buf on the ready_que. */
- push_ready( minor, dt3155_fbuffer[ minor ]->active_buf );
+ push_ready(minor, dt3155_fbuffer[minor]->active_buf);
/* There's at least 1 empty -- make it active */
- dt3155_fbuffer[ minor ]->active_buf = pop_empty( minor );
- dt3155_fbuffer[ minor ]->
- frame_info[ dt3155_fbuffer[ minor ]->
- active_buf ].tag = ++unique_tag;
+ dt3155_fbuffer[minor]->active_buf = pop_empty(minor);
+ dt3155_fbuffer[minor]->
+ frame_info[dt3155_fbuffer[minor]->
+ active_buf].tag = ++unique_tag;
}
else /* nbuffers == 2, special case */
{ /* There is 1 active buffer.
* If there is a locked buffer, keep the active buffer
* the same -- that means we drop a frame.
*/
- if ( dt3155_fbuffer[ minor ]->locked_buf < 0 )
+ if (dt3155_fbuffer[minor]->locked_buf < 0)
{
- push_ready( minor,
- dt3155_fbuffer[ minor ]->active_buf );
- if (are_empty_buffers( minor ) )
+ push_ready(minor,
+ dt3155_fbuffer[minor]->active_buf);
+ if (are_empty_buffers(minor))
{
- dt3155_fbuffer[ minor ]->active_buf =
- pop_empty( minor );
+ dt3155_fbuffer[minor]->active_buf =
+ pop_empty(minor);
}
else
{ /* no empty or locked buffers, so use a readybuf */
- dt3155_fbuffer[ minor ]->active_buf =
- pop_ready( minor );
+ dt3155_fbuffer[minor]->active_buf =
+ pop_ready(minor);
}
}
}
#ifdef DEBUG_QUES_B
- printques( minor );
+ printques(minor);
#endif
- dt3155_fbuffer[ minor ]->even_happened = 0;
+ dt3155_fbuffer[minor]->even_happened = 0;
- wake_up_interruptible( &dt3155_read_wait_queue[ minor ] );
+ wake_up_interruptible(&dt3155_read_wait_queue[minor]);
local_irq_restore(flags);
}
/* Set up the DMA address for the next frame/field */
- buffer_addr = dt3155_fbuffer[ minor ]->
- frame_info[ dt3155_fbuffer[ minor ]->active_buf ].addr;
- if ( (dt3155_status[ minor ].state & DT3155_STATE_MODE) ==
- DT3155_STATE_FLD )
+ buffer_addr = dt3155_fbuffer[minor]->
+ frame_info[dt3155_fbuffer[minor]->active_buf].addr;
+ if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
+ DT3155_STATE_FLD)
{
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_START), buffer_addr);
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
}
else
{
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_START), buffer_addr);
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_START), buffer_addr
- + dt3155_status[ minor ].config.cols);
+ WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr
+ + dt3155_status[minor].config.cols);
}
/* Do error checking */
i2c_odd_csr.fld.DONE_ODD = 1;
- if ( i2c_odd_csr.fld.ERROR_ODD )
+ if (i2c_odd_csr.fld.ERROR_ODD)
dt3155_errno = DT_ERR_OVERRUN;
- WriteI2C(dt3155_lbase[ minor ], ODD_CSR, i2c_odd_csr.reg );
+ WriteI2C(dt3155_lbase[minor], ODD_CSR, i2c_odd_csr.reg);
return;
}
/* If we get here, the Odd Field wasn't it either... */
- printk( "neither even nor odd. shared perhaps?\n");
+ printk("neither even nor odd. shared perhaps?\n");
}
/*****************************************************
@@ -421,22 +421,22 @@ static inline void dt3155_isr( int irq, void *dev_id, struct pt_regs *regs )
*****************************************************/
static void dt3155_init_isr(int minor)
{
- const u32 stride = dt3155_status[ minor ].config.cols;
+ const u32 stride = dt3155_status[minor].config.cols;
- switch (dt3155_status[ minor ].state & DT3155_STATE_MODE)
+ switch (dt3155_status[minor].state & DT3155_STATE_MODE)
{
case DT3155_STATE_FLD:
{
- even_dma_start_r = dt3155_status[ minor ].
- fbuffer.frame_info[ dt3155_status[ minor ].fbuffer.active_buf ].addr;
+ even_dma_start_r = dt3155_status[minor].
+ fbuffer.frame_info[dt3155_status[minor].fbuffer.active_buf].addr;
even_dma_stride_r = 0;
odd_dma_stride_r = 0;
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_START),
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
even_dma_start_r);
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_STRIDE),
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_STRIDE),
even_dma_stride_r);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_STRIDE),
+ WriteMReg((dt3155_lbase[minor] + ODD_DMA_STRIDE),
odd_dma_stride_r);
break;
}
@@ -444,19 +444,19 @@ static void dt3155_init_isr(int minor)
case DT3155_STATE_FRAME:
default:
{
- even_dma_start_r = dt3155_status[ minor ].
- fbuffer.frame_info[ dt3155_status[ minor ].fbuffer.active_buf ].addr;
+ even_dma_start_r = dt3155_status[minor].
+ fbuffer.frame_info[dt3155_status[minor].fbuffer.active_buf].addr;
odd_dma_start_r = even_dma_start_r + stride;
even_dma_stride_r = stride;
odd_dma_stride_r = stride;
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_START),
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
even_dma_start_r);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_START),
+ WriteMReg((dt3155_lbase[minor] + ODD_DMA_START),
odd_dma_start_r);
- WriteMReg((dt3155_lbase[ minor ] + EVEN_DMA_STRIDE),
+ WriteMReg((dt3155_lbase[minor] + EVEN_DMA_STRIDE),
even_dma_stride_r);
- WriteMReg((dt3155_lbase[ minor ] + ODD_DMA_STRIDE),
+ WriteMReg((dt3155_lbase[minor] + ODD_DMA_STRIDE),
odd_dma_stride_r);
break;
}
@@ -465,9 +465,9 @@ static void dt3155_init_isr(int minor)
/* 50/60 Hz should be set before this point but let's make sure it is */
/* right anyway */
- ReadI2C(dt3155_lbase[ minor ], CONFIG, &i2c_csr2.reg);
+ ReadI2C(dt3155_lbase[minor], CONFIG, &i2c_csr2.reg);
i2c_csr2.fld.HZ50 = FORMAT50HZ;
- WriteI2C(dt3155_lbase[ minor ], CONFIG, i2c_config.reg);
+ WriteI2C(dt3155_lbase[minor], CONFIG, i2c_config.reg);
/* enable busmaster chip, clear flags */
@@ -487,7 +487,7 @@ static void dt3155_init_isr(int minor)
csr1_r.fld.FLD_CRPT_EVE = 1; /* writing a 1 clears flags */
csr1_r.fld.FLD_CRPT_ODD = 1;
- WriteMReg((dt3155_lbase[ minor ] + CSR1),csr1_r.reg);
+ WriteMReg((dt3155_lbase[minor] + CSR1),csr1_r.reg);
/* Enable interrupts at the end of each field */
@@ -496,14 +496,14 @@ static void dt3155_init_isr(int minor)
int_csr_r.fld.FLD_END_ODD_EN = 1;
int_csr_r.fld.FLD_START_EN = 0;
- WriteMReg((dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg);
+ WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
/* start internal BUSY bits */
- ReadI2C(dt3155_lbase[ minor ], CSR2, &i2c_csr2.reg);
+ ReadI2C(dt3155_lbase[minor], CSR2, &i2c_csr2.reg);
i2c_csr2.fld.BUSY_ODD = 1;
i2c_csr2.fld.BUSY_EVE = 1;
- WriteI2C(dt3155_lbase[ minor ], CSR2, i2c_csr2.reg);
+ WriteI2C(dt3155_lbase[minor], CSR2, i2c_csr2.reg);
/* Now its up to the interrupt routine!! */
@@ -522,7 +522,7 @@ static int dt3155_ioctl(struct inode *inode,
{
int minor = MINOR(inode->i_rdev); /* What device are we ioctl()'ing? */
- if ( minor >= MAXBOARDS || minor < 0 )
+ if (minor >= MAXBOARDS || minor < 0)
return -ENODEV;
/* make sure it is valid command */
@@ -566,7 +566,7 @@ static int dt3155_ioctl(struct inode *inode,
case DT3155_GET_CONFIG:
{
if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
- sizeof(dt3155_status_t) ))
+ sizeof(dt3155_status_t)))
return -EFAULT;
return 0;
}
@@ -610,7 +610,7 @@ static int dt3155_ioctl(struct inode *inode,
}
dt3155_init_isr(minor);
- if (copy_to_user( (void *) arg, (void *) &dt3155_status[minor],
+ if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
sizeof(dt3155_status_t)))
return -EFAULT;
return 0;
@@ -682,36 +682,36 @@ static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
* MOD_INC_USE_COUNT make sure that the driver memory is not freed
* while the device is in use.
*****************************************************/
-static int dt3155_open( struct inode* inode, struct file* filep)
+static int dt3155_open(struct inode* inode, struct file* filep)
{
int minor = MINOR(inode->i_rdev); /* what device are we opening? */
- if (dt3155_dev_open[ minor ]) {
+ if (dt3155_dev_open[minor]) {
printk ("DT3155: Already opened by another process.\n");
return -EBUSY;
}
- if (dt3155_status[ minor ].device_installed==0)
+ if (dt3155_status[minor].device_installed==0)
{
printk("DT3155 Open Error: No such device dt3155 minor number %d\n",
minor);
return -EIO;
}
- if (dt3155_status[ minor ].state != DT3155_STATE_IDLE) {
+ if (dt3155_status[minor].state != DT3155_STATE_IDLE) {
printk ("DT3155: Not in idle state (state = %x)\n",
- dt3155_status[ minor ].state);
+ dt3155_status[minor].state);
return -EBUSY;
}
printk("DT3155: Device opened.\n");
- dt3155_dev_open[ minor ] = 1 ;
+ dt3155_dev_open[minor] = 1 ;
- dt3155_flush( minor );
+ dt3155_flush(minor);
/* Disable ALL interrupts */
int_csr_r.reg = 0;
- WriteMReg( (dt3155_lbase[ minor ] + INT_CSR), int_csr_r.reg );
+ WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
@@ -725,20 +725,20 @@ static int dt3155_open( struct inode* inode, struct file* filep)
* Now decrement the use count.
*
*****************************************************/
-static int dt3155_close( struct inode *inode, struct file *filep)
+static int dt3155_close(struct inode *inode, struct file *filep)
{
int minor;
minor = MINOR(inode->i_rdev); /* which device are we closing */
- if (!dt3155_dev_open[ minor ])
+ if (!dt3155_dev_open[minor])
{
printk("DT3155: attempt to CLOSE a not OPEN device\n");
}
else
{
- dt3155_dev_open[ minor ] = 0;
+ dt3155_dev_open[minor] = 0;
- if (dt3155_status[ minor ].state != DT3155_STATE_IDLE)
+ if (dt3155_status[minor].state != DT3155_STATE_IDLE)
{
quick_stop(minor);
}
@@ -782,7 +782,7 @@ static ssize_t dt3155_read(struct file *filep, char __user *buf,
if (filep->f_flags & O_NDELAY)
{
if ((frame_index = dt3155_get_ready_buffer(minor)) < 0) {
- /*printk( "dt3155: no buffers available (?)\n");*/
+ /*printk("dt3155: no buffers available (?)\n");*/
/* printques(minor); */
return -EAGAIN;
}
@@ -814,7 +814,7 @@ static ssize_t dt3155_read(struct file *filep, char __user *buf,
put_user(offset, (unsigned int *) buf);
buf += sizeof(u32);
- put_user( dt3155_status[minor].fbuffer.frame_count, (unsigned int *) buf);
+ put_user(dt3155_status[minor].fbuffer.frame_count, (unsigned int *) buf);
buf += sizeof(u32);
put_user(dt3155_status[minor].state, (unsigned int *) buf);
buf += sizeof(u32);
@@ -901,7 +901,7 @@ static int find_PCI (void)
/* Now, just go out and make sure that this/these device(s) is/are
actually mapped into the kernel address space */
- if ((error = pci_read_config_dword( pci_dev, PCI_BASE_ADDRESS_0,
+ if ((error = pci_read_config_dword(pci_dev, PCI_BASE_ADDRESS_0,
(u32 *) &base)))
{
printk("DT3155: Was not able to find device \n");
@@ -913,26 +913,26 @@ static int find_PCI (void)
/* Remap the base address to a logical address through which we
* can access it. */
- dt3155_lbase[ pci_index - 1 ] = ioremap(base,PCI_PAGE_SIZE);
- dt3155_status[ pci_index - 1 ].reg_addr = base;
+ dt3155_lbase[pci_index - 1] = ioremap(base,PCI_PAGE_SIZE);
+ dt3155_status[pci_index - 1].reg_addr = base;
DT_3155_DEBUG_MSG("DT3155: New logical address is %p \n",
dt3155_lbase[pci_index-1]);
- if ( !dt3155_lbase[pci_index-1] )
+ if (!dt3155_lbase[pci_index-1])
{
printk("DT3155: Unable to remap control registers\n");
goto err;
}
- if ( (error = pci_read_config_byte( pci_dev, PCI_INTERRUPT_LINE, &irq)) )
+ if ((error = pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &irq)))
{
printk("DT3155: Was not able to find device \n");
goto err;
}
DT_3155_DEBUG_MSG("DT3155: IRQ is %d \n",irq);
- dt3155_status[ pci_index-1 ].irq = irq;
+ dt3155_status[pci_index-1].irq = irq;
/* Set flag: kth device found! */
- dt3155_status[ pci_index-1 ].device_installed = 1;
+ dt3155_status[pci_index-1].device_installed = 1;
printk("DT3155: Installing device %d w/irq %d and address %p\n",
pci_index,
dt3155_status[pci_index-1].irq,
@@ -957,89 +957,89 @@ int init_module(void)
{
int index;
int rcode = 0;
- char *devname[ MAXBOARDS ];
+ char *devname[MAXBOARDS];
- devname[ 0 ] = "dt3155a";
+ devname[0] = "dt3155a";
#if MAXBOARDS == 2
- devname[ 1 ] = "dt3155b";
+ devname[1] = "dt3155b";
#endif
printk("DT3155: Loading module...\n");
/* Register the device driver */
- rcode = register_chrdev( dt3155_major, "dt3155", &dt3155_fops );
- if( rcode < 0 )
+ rcode = register_chrdev(dt3155_major, "dt3155", &dt3155_fops);
+ if(rcode < 0)
{
- printk( KERN_INFO "DT3155: register_chrdev failed \n");
+ printk(KERN_INFO "DT3155: register_chrdev failed \n");
return rcode;
}
- if( dt3155_major == 0 )
+ if(dt3155_major == 0)
dt3155_major = rcode; /* dynamic */
/* init the status variables. */
/* DMA memory is taken care of in setup_buffers() */
- for ( index = 0; index < MAXBOARDS; index++ )
+ for (index = 0; index < MAXBOARDS; index++)
{
- dt3155_status[ index ].config.acq_mode = DT3155_MODE_FRAME;
- dt3155_status[ index ].config.continuous = DT3155_ACQ;
- dt3155_status[ index ].config.cols = DT3155_MAX_COLS;
- dt3155_status[ index ].config.rows = DT3155_MAX_ROWS;
- dt3155_status[ index ].state = DT3155_STATE_IDLE;
+ dt3155_status[index].config.acq_mode = DT3155_MODE_FRAME;
+ dt3155_status[index].config.continuous = DT3155_ACQ;
+ dt3155_status[index].config.cols = DT3155_MAX_COLS;
+ dt3155_status[index].config.rows = DT3155_MAX_ROWS;
+ dt3155_status[index].state = DT3155_STATE_IDLE;
/* find_PCI() will check if devices are installed; */
/* first assume they're not: */
- dt3155_status[ index ].mem_addr = 0;
- dt3155_status[ index ].mem_size = 0;
- dt3155_status[ index ].state = DT3155_STATE_IDLE;
- dt3155_status[ index ].device_installed = 0;
+ dt3155_status[index].mem_addr = 0;
+ dt3155_status[index].mem_size = 0;
+ dt3155_status[index].state = DT3155_STATE_IDLE;
+ dt3155_status[index].device_installed = 0;
}
/* Now let's find the hardware. find_PCI() will set ndevices to the
* number of cards found in this machine. */
{
- if ( (rcode = find_PCI()) != DT_3155_SUCCESS )
+ if ((rcode = find_PCI()) != DT_3155_SUCCESS)
{
printk("DT3155 error: find_PCI() failed to find dt3155 board(s)\n");
- unregister_chrdev( dt3155_major, "dt3155" );
+ unregister_chrdev(dt3155_major, "dt3155");
return rcode;
}
}
/* Ok, time to setup the frame buffers */
- if( (rcode = dt3155_setup_buffers(&allocatorAddr)) < 0 )
+ if((rcode = dt3155_setup_buffers(&allocatorAddr)) < 0)
{
printk("DT3155: Error: setting up buffer not large enough.");
- unregister_chrdev( dt3155_major, "dt3155" );
+ unregister_chrdev(dt3155_major, "dt3155");
return rcode;
}
/* If we are this far, then there is enough RAM */
/* for the buffers: Print the configuration. */
- for( index = 0; index < ndevices; index++ )
+ for( index = 0; index < ndevices; index++)
{
printk("DT3155: Device = %d; acq_mode = %d; "
"continuous = %d; cols = %d; rows = %d;\n",
index ,
- dt3155_status[ index ].config.acq_mode,
- dt3155_status[ index ].config.continuous,
- dt3155_status[ index ].config.cols,
- dt3155_status[ index ].config.rows);
+ dt3155_status[index].config.acq_mode,
+ dt3155_status[index].config.continuous,
+ dt3155_status[index].config.cols,
+ dt3155_status[index].config.rows);
printk("DT3155: m_addr = 0x%x; m_size = %ld; "
"state = %d; device_installed = %d\n",
- dt3155_status[ index ].mem_addr,
- (long int)dt3155_status[ index ].mem_size,
- dt3155_status[ index ].state,
- dt3155_status[ index ].device_installed);
+ dt3155_status[index].mem_addr,
+ (long int)dt3155_status[index].mem_size,
+ dt3155_status[index].state,
+ dt3155_status[index].device_installed);
}
/* Disable ALL interrupts */
int_csr_r.reg = 0;
- for( index = 0; index < ndevices; index++ )
+ for( index = 0; index < ndevices; index++)
{
- WriteMReg( (dt3155_lbase[ index ] + INT_CSR), int_csr_r.reg );
- if( dt3155_status[ index ].device_installed )
+ WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
+ if(dt3155_status[index].device_installed)
{
/*
* This driver *looks* like it can handle sharing interrupts,
@@ -1048,14 +1048,14 @@ int init_module(void)
* as a reminder in case any problems arise. (SS)
*/
/* in older kernels flags are: SA_SHIRQ | SA_INTERRUPT */
- rcode = request_irq( dt3155_status[ index ].irq, (void *)dt3155_isr,
- IRQF_SHARED | IRQF_DISABLED, devname[ index ],
+ rcode = request_irq(dt3155_status[index].irq, (void *)dt3155_isr,
+ IRQF_SHARED | IRQF_DISABLED, devname[index],
(void*) &dt3155_status[index]);
- if( rcode < 0 )
+ if(rcode < 0)
{
printk("DT3155: minor %d request_irq failed for IRQ %d\n",
index, dt3155_status[index].irq);
- unregister_chrdev( dt3155_major, "dt3155" );
+ unregister_chrdev(dt3155_major, "dt3155");
return rcode;
}
}
@@ -1084,15 +1084,15 @@ void cleanup_module(void)
allocator_cleanup();
#endif
- unregister_chrdev( dt3155_major, "dt3155" );
+ unregister_chrdev(dt3155_major, "dt3155");
- for( index = 0; index < ndevices; index++ )
+ for(index = 0; index < ndevices; index++)
{
- if( dt3155_status[ index ].device_installed == 1 )
+ if(dt3155_status[index].device_installed == 1)
{
- printk( "DT3155: Freeing irq %d for device %d\n",
- dt3155_status[ index ].irq, index );
- free_irq( dt3155_status[ index ].irq, (void*)&dt3155_status[index] );
+ printk("DT3155: Freeing irq %d for device %d\n",
+ dt3155_status[index].irq, index);
+ free_irq(dt3155_status[index].irq, (void*)&dt3155_status[index]);
}
}
}
--
1.7.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
