From: Gorskin Ilya <revent82@xxxxxxxxx>
This is a patch to the comedi.h files that fixes up errors found by the
checkpatch.pl tool
Signed-off-by: Gorskin Ilya <revent82@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/comedi/comedi.h | 55 +++++++++++++++++++++++++-------------
1 files changed, 36 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index b559a9c..1251e07 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -490,7 +490,8 @@
I8254_BINARY = 0
};
- static inline unsigned NI_USUAL_PFI_SELECT(unsigned pfi_channel) {
+ static inline unsigned NI_USUAL_PFI_SELECT(unsigned pfi_channel)
+ {
if (pfi_channel < 10)
return 0x1 + pfi_channel;
else
@@ -590,14 +591,17 @@
NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000, /* divide source by 8 */
NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000
};
- static inline unsigned NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(unsigned n) {
+ static inline unsigned NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(unsigned n)
+ {
/* NI 660x-specific */
return 0x10 + n;
}
- static inline unsigned NI_GPCT_RTSI_CLOCK_SRC_BITS(unsigned n) {
+ static inline unsigned NI_GPCT_RTSI_CLOCK_SRC_BITS(unsigned n)
+ {
return 0x18 + n;
}
- static inline unsigned NI_GPCT_PFI_CLOCK_SRC_BITS(unsigned n) {
+ static inline unsigned NI_GPCT_PFI_CLOCK_SRC_BITS(unsigned n)
+ {
/* no pfi on NI 660x */
return 0x20 + n;
}
@@ -625,16 +629,20 @@ May be bitwise-or'd with CR_EDGE or CR_INVERT. */
we should add them here with an offset of 0x300 when known. */
NI_GPCT_DISABLED_GATE_SELECT = 0x8000,
};
- static inline unsigned NI_GPCT_GATE_PIN_GATE_SELECT(unsigned n) {
+ static inline unsigned NI_GPCT_GATE_PIN_GATE_SELECT(unsigned n)
+ {
return 0x102 + n;
}
- static inline unsigned NI_GPCT_RTSI_GATE_SELECT(unsigned n) {
+ static inline unsigned NI_GPCT_RTSI_GATE_SELECT(unsigned n)
+ {
return NI_USUAL_RTSI_SELECT(n);
}
- static inline unsigned NI_GPCT_PFI_GATE_SELECT(unsigned n) {
+ static inline unsigned NI_GPCT_PFI_GATE_SELECT(unsigned n)
+ {
return NI_USUAL_PFI_SELECT(n);
}
- static inline unsigned NI_GPCT_UP_DOWN_PIN_GATE_SELECT(unsigned n) {
+ static inline unsigned NI_GPCT_UP_DOWN_PIN_GATE_SELECT(unsigned n)
+ {
return 0x202 + n;
}
@@ -650,7 +658,8 @@ INSN_CONFIG_SET_OTHER_SRC when using NI general-purpose counters. */
/* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */
NI_GPCT_DISABLED_OTHER_SELECT = 0x8000,
};
- static inline unsigned NI_GPCT_PFI_OTHER_SELECT(unsigned n) {
+ static inline unsigned NI_GPCT_PFI_OTHER_SELECT(unsigned n)
+ {
return NI_USUAL_PFI_SELECT(n);
}
@@ -699,7 +708,8 @@ INSN_CONFIG_ARM */
NI_MIO_PLL_PXI10_CLOCK = 3,
NI_MIO_PLL_RTSI0_CLOCK = 4
};
- static inline unsigned NI_MIO_PLL_RTSI_CLOCK(unsigned rtsi_channel) {
+ static inline unsigned NI_MIO_PLL_RTSI_CLOCK(unsigned rtsi_channel)
+ {
return NI_MIO_PLL_RTSI0_CLOCK + rtsi_channel;
}
@@ -719,7 +729,8 @@ INSN_CONFIG_ARM */
NI_RTSI_OUTPUT_RTSI_OSC = 12 /* pre-m-series always have RTSI clock
on line 7 */
};
- static inline unsigned NI_RTSI_OUTPUT_RTSI_BRD(unsigned n) {
+ static inline unsigned NI_RTSI_OUTPUT_RTSI_BRD(unsigned n)
+ {
return NI_RTSI_OUTPUT_RTSI_BRD_0 + n;
}
@@ -754,7 +765,8 @@ INSN_CONFIG_ARM */
NI_PFI_OUTPUT_CDI_SAMPLE = 29,
NI_PFI_OUTPUT_CDO_UPDATE = 30
};
- static inline unsigned NI_PFI_OUTPUT_RTSI(unsigned rtsi_channel) {
+ static inline unsigned NI_PFI_OUTPUT_RTSI(unsigned rtsi_channel)
+ {
return NI_PFI_OUTPUT_RTSI0 + rtsi_channel;
}
@@ -772,10 +784,12 @@ INSN_CONFIG_ARM */
/* NI External Trigger lines. These values are not arbitrary, but are related
* to the bits required to program the board (offset by 1 for historical
* reasons). */
- static inline unsigned NI_EXT_PFI(unsigned pfi_channel) {
+ static inline unsigned NI_EXT_PFI(unsigned pfi_channel)
+ {
return NI_USUAL_PFI_SELECT(pfi_channel) - 1;
}
- static inline unsigned NI_EXT_RTSI(unsigned rtsi_channel) {
+ static inline unsigned NI_EXT_RTSI(unsigned rtsi_channel)
+ {
return NI_USUAL_RTSI_SELECT(rtsi_channel) - 1;
}
@@ -801,21 +815,24 @@ INSN_CONFIG_ARM */
NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32,
NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33
};
- static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel) {
+ static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel)
+ {
return NI_USUAL_PFI_SELECT(pfi_channel);
}
- static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_RTSI(unsigned
- rtsi_channel) {
+ static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel)
+ {
return NI_USUAL_RTSI_SELECT(rtsi_channel);
}
/* scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command on NI
* boards. These scan begin sources can also be bitwise-or'd with CR_INVERT to
* change polarity. */
- static inline unsigned NI_AO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel) {
+ static inline unsigned NI_AO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel)
+ {
return NI_USUAL_PFI_SELECT(pfi_channel);
}
- static inline unsigned NI_AO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel) {
+ static inline unsigned NI_AO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel)
+ {
return NI_USUAL_RTSI_SELECT(rtsi_channel);
}
--
1.7.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
