From: Prashant P. Shah <pshah.mumbai@xxxxxxxxx> This is a patch to the netwave_cs.c file that fixes up all the trailing whitespace errors found by the checkpatch.pl tool. Signed-off-by: Prashant P. Shah <pshah.mumbai@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx> --- drivers/staging/netwave/netwave_cs.c | 248 +++++++++++++++++----------------- 1 files changed, 124 insertions(+), 124 deletions(-) diff --git a/drivers/staging/netwave/netwave_cs.c b/drivers/staging/netwave/netwave_cs.c index 3875a72..7b31621 100644 --- a/drivers/staging/netwave/netwave_cs.c +++ b/drivers/staging/netwave/netwave_cs.c @@ -1,5 +1,5 @@ /********************************************************************* - * + * * Filename: netwave_cs.c * Version: 0.4.1 * Description: Netwave AirSurfer Wireless LAN PC Card driver @@ -10,27 +10,27 @@ * Created at: A long time ago! * Modified at: Mon Nov 10 11:54:37 1997 * Modified by: Dag Brattli <dagb@xxxxxxxxx> - * + * * Copyright (c) 1997 University of Tromsø, Norway * * Revision History: * * 08-Nov-97 15:14:47 John Markus Bjørndalen <johnm@xxxxxxxxx> - * - Fixed some bugs in netwave_rx and cleaned it up a bit. + * - Fixed some bugs in netwave_rx and cleaned it up a bit. * (One of the bugs would have destroyed packets when receiving - * multiple packets per interrupt). - * - Cleaned up parts of newave_hw_xmit. - * - A few general cleanups. + * multiple packets per interrupt). + * - Cleaned up parts of newave_hw_xmit. + * - A few general cleanups. * 24-Oct-97 13:17:36 Dag Brattli <dagb@xxxxxxxxx> * - Fixed netwave_rx receive function (got updated docs) * Others: - * - Changed name from xircnw to netwave, take a look at + * - Changed name from xircnw to netwave, take a look at * http://www.netwave-wireless.com * - Some reorganizing of the code * - Removed possible race condition between interrupt handler and transmit * function * - Started to add wireless extensions, but still needs some coding - * - Added watchdog for better handling of transmission timeouts + * - Added watchdog for better handling of transmission timeouts * (hopefully this works better) ********************************************************************/ @@ -101,7 +101,7 @@ /* * Commands used in the extended command buffer - * NETWAVE_EREG_CB (0x100-0x10F) + * NETWAVE_EREG_CB (0x100-0x10F) */ #define NETWAVE_CMD_NOP 0x00 #define NETWAVE_CMD_SRC 0x01 @@ -133,7 +133,7 @@ static const unsigned int corConfIENA = 0x01; /* Interrupt enable */ static const unsigned int corConfLVLREQ = 0x40; /* Keep high */ static const unsigned int rxConfRxEna = 0x80; /* Receive Enable */ -static const unsigned int rxConfMAC = 0x20; /* MAC host receive mode*/ +static const unsigned int rxConfMAC = 0x20; /* MAC host receive mode*/ static const unsigned int rxConfPro = 0x10; /* Promiscuous */ static const unsigned int rxConfAMP = 0x08; /* Accept Multicast Packets */ static const unsigned int rxConfBcast = 0x04; /* Accept Broadcast Packets */ @@ -152,15 +152,15 @@ static const unsigned int txConfLoop = 0x01; /* Loopback mode */ /* Choose the domain, default is 0x100 */ static u_int domain = 0x100; -/* Scramble key, range from 0x0 to 0xffff. - * 0x0 is no scrambling. +/* Scramble key, range from 0x0 to 0xffff. + * 0x0 is no scrambling. */ static u_int scramble_key = 0x0; -/* Shared memory speed, in ns. The documentation states that - * the card should not be read faster than every 400ns. - * This timing should be provided by the HBA. If it becomes a - * problem, try setting mem_speed to 400. +/* Shared memory speed, in ns. The documentation states that + * the card should not be read faster than every 400ns. + * This timing should be provided by the HBA. If it becomes a + * problem, try setting mem_speed to 400. */ static int mem_speed; @@ -229,7 +229,7 @@ struct site_survey { u_short length; u_char struct_revision; u_char roaming_state; - + u_char sp_existsFlag; u_char sp_link_quality; u_char sp_max_link_quality; @@ -239,12 +239,12 @@ struct site_survey { u_char sp_goodness; u_char sp_hotheadcount; u_char roaming_condition; - + net_addr sp; u_char numAPs; net_addr nearByAccessPoints[MAX_ESA]; -}; - +}; + typedef struct netwave_private { struct pcmcia_device *p_dev; spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ @@ -261,7 +261,7 @@ typedef struct netwave_private { * The Netwave card is little-endian, so won't work for big endian * systems. */ -static inline unsigned short get_uint16(u_char __iomem *staddr) +static inline unsigned short get_uint16(u_char __iomem *staddr) { return readw(staddr); /* Return only 16 bits */ } @@ -271,38 +271,38 @@ static inline short get_int16(u_char __iomem * staddr) return readw(staddr); } -/* - * Wait until the WOC (Write Operation Complete) bit in the - * ASR (Adapter Status Register) is asserted. - * This should have aborted if it takes too long time. +/* + * Wait until the WOC (Write Operation Complete) bit in the + * ASR (Adapter Status Register) is asserted. + * This should have aborted if it takes too long time. */ static inline void wait_WOC(unsigned int iobase) { /* Spin lock */ - while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ; + while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ; } -static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, +static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, unsigned int iobase) { u_short resultBuffer; - /* if time since last snapshot is > 1 sec. (100 jiffies?) then take - * new snapshot, else return cached data. This is the recommended rate. + /* if time since last snapshot is > 1 sec. (100 jiffies?) then take + * new snapshot, else return cached data. This is the recommended rate. */ - if ( jiffies - priv->lastExec > 100) { - /* Take site survey snapshot */ + if ( jiffies - priv->lastExec > 100) { + /* Take site survey snapshot */ /*printk( KERN_DEBUG "Taking new snapshot. %ld\n", jiffies - priv->lastExec); */ - wait_WOC(iobase); - writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0); - writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); - wait_WOC(iobase); - - /* Get result and copy to cach */ - resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP); - copy_from_pc( &priv->nss, ramBase+resultBuffer, - sizeof(struct site_survey)); - } + wait_WOC(iobase); + writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0); + writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); + wait_WOC(iobase); + + /* Get result and copy to cach */ + resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP); + copy_from_pc( &priv->nss, ramBase+resultBuffer, + sizeof(struct site_survey)); + } } /* @@ -312,21 +312,21 @@ static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, * */ static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev) -{ +{ unsigned long flags; unsigned int iobase = dev->base_addr; netwave_private *priv = netdev_priv(dev); u_char __iomem *ramBase = priv->ramBase; struct iw_statistics* wstats; - + wstats = &priv->iw_stats; spin_lock_irqsave(&priv->spinlock, flags); - + netwave_snapshot( priv, ramBase, iobase); wstats->status = priv->nss.roaming_state; - wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ); + wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ); wstats->qual.level = readb( ramBase + NETWAVE_EREG_ISPLQ); wstats->qual.noise = readb( ramBase + NETWAVE_EREG_SPU) & 0x3f; wstats->discard.nwid = 0L; @@ -334,7 +334,7 @@ static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev) wstats->discard.misc = 0L; spin_unlock_irqrestore(&priv->spinlock, flags); - + return &priv->iw_stats; } @@ -352,8 +352,8 @@ static const struct net_device_ops netwave_netdev_ops = { /* * Function netwave_attach (void) * - * Creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card + * Creates an "instance" of the driver, allocating local data + * structures for one device. The device is registered with Card * Services. * * The dev_link structure is initialized, but we don't actually @@ -378,14 +378,14 @@ static int netwave_probe(struct pcmcia_device *link) /* The io structure describes IO port mapping */ link->io.NumPorts1 = 16; link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - /* link->io.NumPorts2 = 16; + /* link->io.NumPorts2 = 16; link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */ link->io.IOAddrLines = 5; - + /* Interrupt setup */ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.Handler = &netwave_interrupt; - + /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -457,7 +457,7 @@ static int netwave_set_nwid(struct net_device *dev, if(!wrqu->nwid.disabled) { domain = wrqu->nwid.value; - printk( KERN_DEBUG "Setting domain to 0x%x%02x\n", + printk( KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff); wait_WOC(iobase); writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0); @@ -468,7 +468,7 @@ static int netwave_set_nwid(struct net_device *dev, /* ReEnable interrupts & restore flags */ spin_unlock_irqrestore(&priv->spinlock, flags); - + return 0; } @@ -511,7 +511,7 @@ static int netwave_set_scramble(struct net_device *dev, /* ReEnable interrupts & restore flags */ spin_unlock_irqrestore(&priv->spinlock, flags); - + return 0; } @@ -566,19 +566,19 @@ static int netwave_get_range(struct net_device *dev, /* Set the Wireless Extension versions */ range->we_version_compiled = WIRELESS_EXT; range->we_version_source = 9; /* Nothing for us in v10 and v11 */ - + /* Set information in the range struct */ range->throughput = 450 * 1000; /* don't argue on this ! */ range->min_nwid = 0x0000; range->max_nwid = 0x01FF; range->num_channels = range->num_frequency = 0; - + range->sensitivity = 0x3F; range->max_qual.qual = 255; range->max_qual.level = 255; range->max_qual.noise = 0; - + range->num_bitrates = 1; range->bitrate[0] = 1000000; /* 1 Mb/s */ @@ -614,7 +614,7 @@ static int netwave_get_snap(struct net_device *dev, /* ReEnable interrupts & restore flags */ spin_unlock_irqrestore(&priv->spinlock, flags); - + return(0); } @@ -625,8 +625,8 @@ static int netwave_get_snap(struct net_device *dev, static const struct iw_priv_args netwave_private_args[] = { /*{ cmd, set_args, get_args, name } */ - { SIOCGIPSNAP, 0, - IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey), + { SIOCGIPSNAP, 0, + IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey), "getsitesurvey" }, }; @@ -698,9 +698,9 @@ static const struct iw_handler_def netwave_handler_def = /* * Function netwave_pcmcia_config (link) * - * netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION + * netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. + * device available to the system. * */ @@ -758,7 +758,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { ret = pcmcia_request_window(link, &req, &link->win); if (ret) goto failed; - mem.CardOffset = 0x20000; mem.Page = 0; + mem.CardOffset = 0x20000; mem.Page = 0; ret = pcmcia_map_mem_page(link, link->win, &mem); if (ret) goto failed; @@ -783,7 +783,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { netwave_doreset(dev->base_addr, ramBase); /* Read the ethernet address and fill in the Netwave registers. */ - for (i = 0; i < 6; i++) + for (i = 0; i < 6; i++) dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i); printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx, " @@ -795,7 +795,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { dev->dev_addr); /* get revision words */ - printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n", + printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n", get_uint16(ramBase + NETWAVE_EREG_ARW), get_uint16(ramBase + NETWAVE_EREG_ARW+2)); return 0; @@ -864,7 +864,7 @@ static void netwave_doreset(unsigned int ioBase, u_char __iomem *ramBase) /* * Function netwave_reset (dev) * - * Reset and restore all of the netwave registers + * Reset and restore all of the netwave registers */ static void netwave_reset(struct net_device *dev) { /* u_char state; */ @@ -879,24 +879,24 @@ static void netwave_reset(struct net_device *dev) { /* Reset card */ netwave_doreset(iobase, ramBase); printk(KERN_DEBUG "netwave_reset: Done with hardware reset\n"); - + /* Write a NOP to check the card */ wait_WOC(iobase); writeb(NETWAVE_CMD_NOP, ramBase + NETWAVE_EREG_CB + 0); writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); - + /* Set receive conf */ wait_WOC(iobase); writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0); writeb(rxConfRxEna + rxConfBcast, ramBase + NETWAVE_EREG_CB + 1); writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2); - + /* Set transmit conf */ wait_WOC(iobase); writeb(NETWAVE_CMD_STC, ramBase + NETWAVE_EREG_CB + 0); writeb(txConfTxEna, ramBase + NETWAVE_EREG_CB + 1); writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2); - + /* Now set the MU Domain */ printk(KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff); wait_WOC(iobase); @@ -904,7 +904,7 @@ static void netwave_reset(struct net_device *dev) { writeb(domain & 0xff, ramBase + NETWAVE_EREG_CB + 1); writeb((domain>>8) & 0x01, ramBase + NETWAVE_EREG_CB + 2); writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); - + /* Set scramble key */ printk(KERN_DEBUG "Setting scramble key to 0x%x\n", scramble_key); wait_WOC(iobase); @@ -914,8 +914,8 @@ static void netwave_reset(struct net_device *dev) { writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); /* Enable interrupts, bit 4 high to keep unused - * source from interrupting us, bit 2 high to - * set interrupt enable, 567 to enable TxDN, + * source from interrupting us, bit 2 high to + * set interrupt enable, 567 to enable TxDN, * RxErr and RxRdy */ wait_WOC(iobase); @@ -926,29 +926,29 @@ static void netwave_reset(struct net_device *dev) { * skriv 80 til d000:3688 * sjekk om det ble 80 */ - + /* Enable Receiver */ wait_WOC(iobase); writeb(NETWAVE_CMD_ER, ramBase + NETWAVE_EREG_CB + 0); writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); - + /* Set the IENA bit in COR */ wait_WOC(iobase); outb(corConfIENA + corConfLVLREQ, iobase + NETWAVE_REG_COR); } /* - * Function netwave_hw_xmit (data, len, dev) + * Function netwave_hw_xmit (data, len, dev) */ static int netwave_hw_xmit(unsigned char* data, int len, struct net_device* dev) { unsigned long flags; unsigned int TxFreeList, curBuff, - MaxData, + MaxData, DataOffset; - int tmpcount; - + int tmpcount; + netwave_private *priv = netdev_priv(dev); u_char __iomem * ramBase = priv->ramBase; unsigned int iobase = dev->base_addr; @@ -979,23 +979,23 @@ static int netwave_hw_xmit(unsigned char* data, int len, TxFreeList = get_uint16(ramBase + NETWAVE_EREG_TDP); MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2); DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4); - + pr_debug("TxFreeList %x, MaxData %x, DataOffset %x\n", TxFreeList, MaxData, DataOffset); /* Copy packet to the adapter fragment buffers */ - curBuff = TxFreeList; - tmpcount = 0; + curBuff = TxFreeList; + tmpcount = 0; while (tmpcount < len) { - int tmplen = len - tmpcount; - copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount, + int tmplen = len - tmpcount; + copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount, (tmplen < MaxData) ? tmplen : MaxData); tmpcount += MaxData; - + /* Advance to next buffer */ curBuff = get_uint16(ramBase + curBuff); } - + /* Now issue transmit list */ wait_WOC(iobase); writeb(NETWAVE_CMD_TL, ramBase + NETWAVE_EREG_CB + 0); @@ -1020,7 +1020,7 @@ static netdev_tx_t netwave_start_xmit(struct sk_buff *skb, { short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; unsigned char* buf = skb->data; - + if (netwave_hw_xmit( buf, length, dev) == 1) { /* Some error, let's make them call us another time? */ netif_start_queue(dev); @@ -1028,7 +1028,7 @@ static netdev_tx_t netwave_start_xmit(struct sk_buff *skb, dev->trans_start = jiffies; } dev_kfree_skb(skb); - + return NETDEV_TX_OK; } /* netwave_start_xmit */ @@ -1036,7 +1036,7 @@ static netdev_tx_t netwave_start_xmit(struct sk_buff *skb, * Function netwave_interrupt (irq, dev_id) * * This function is the interrupt handler for the Netwave card. This - * routine will be called whenever: + * routine will be called whenever: * 1. A packet is received. * 2. A packet has successfully been transferred and the unit is * ready to transmit another packet. @@ -1050,29 +1050,29 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) struct netwave_private *priv = netdev_priv(dev); struct pcmcia_device *link = priv->p_dev; int i; - + if (!netif_device_present(dev)) return IRQ_NONE; - + iobase = dev->base_addr; ramBase = priv->ramBase; - + /* Now find what caused the interrupt, check while interrupts ready */ for (i = 0; i < 10; i++) { u_char status; - - wait_WOC(iobase); + + wait_WOC(iobase); if (!(inb(iobase+NETWAVE_REG_CCSR) & 0x02)) break; /* None of the interrupt sources asserted (normal exit) */ - + status = inb(iobase + NETWAVE_REG_ASR); - + if (!pcmcia_dev_present(link)) { pr_debug("netwave_interrupt: Interrupt with status 0x%x " "from removed or suspended card!\n", status); break; } - + /* RxRdy */ if (status & 0x80) { netwave_rx(dev); @@ -1082,24 +1082,24 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) /* RxErr */ if (status & 0x40) { u_char rser; - - rser = readb(ramBase + NETWAVE_EREG_RSER); - + + rser = readb(ramBase + NETWAVE_EREG_RSER); + if (rser & 0x04) { ++dev->stats.rx_dropped; ++dev->stats.rx_crc_errors; } if (rser & 0x02) ++dev->stats.rx_frame_errors; - + /* Clear the RxErr bit in RSER. RSER+4 is the - * write part. Also clear the RxCRC (0x04) and + * write part. Also clear the RxCRC (0x04) and * RxBig (0x02) bits if present */ wait_WOC(iobase); writeb(0x40 | (rser & 0x06), ramBase + NETWAVE_EREG_RSER + 4); /* Write bit 6 high to ASCC to clear RxErr in ASR, - * WOC must be set first! + * WOC must be set first! */ wait_WOC(iobase); writeb(0x40, ramBase + NETWAVE_EREG_ASCC); @@ -1114,31 +1114,31 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) txStatus = readb(ramBase + NETWAVE_EREG_TSER); pr_debug("Transmit done. TSER = %x id %x\n", txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1)); - + if (txStatus & 0x20) { /* Transmitting was okay, clear bits */ wait_WOC(iobase); writeb(0x2f, ramBase + NETWAVE_EREG_TSER + 4); ++dev->stats.tx_packets; } - + if (txStatus & 0xd0) { if (txStatus & 0x80) { ++dev->stats.collisions; /* Because of /proc/net/dev*/ /* ++dev->stats.tx_aborted_errors; */ /* printk("Collision. %ld\n", jiffies - dev->trans_start); */ } - if (txStatus & 0x40) + if (txStatus & 0x40) ++dev->stats.tx_carrier_errors; /* 0x80 TxGU Transmit giveup - nine times and no luck * 0x40 TxNOAP No access point. Discarded packet. - * 0x10 TxErr Transmit error. Always set when + * 0x10 TxErr Transmit error. Always set when * TxGU and TxNOAP is set. (Those are the only ones * to set TxErr). */ pr_debug("netwave_interrupt: TxDN with error status %x\n", txStatus); - + /* Clear out TxGU, TxNOAP, TxErr and TxTrys */ wait_WOC(iobase); writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4); @@ -1190,31 +1190,31 @@ static int netwave_rx(struct net_device *dev) int dataCount, dataOffset; int i; u_char *ptr; - + pr_debug("xinw_rx: Receiving ... \n"); /* Receive max 10 packets for now. */ for (i = 0; i < 10; i++) { /* Any packets? */ wait_WOC(iobase); - rxStatus = readb(ramBase + NETWAVE_EREG_RSER); + rxStatus = readb(ramBase + NETWAVE_EREG_RSER); if ( !( rxStatus & 0x80)) /* No more packets */ break; - + /* Check if multicast/broadcast or other */ /* multicast = (rxStatus & 0x20); */ - + /* The receive list pointer and length of the packet */ wait_WOC(iobase); rcvLen = get_int16( ramBase + NETWAVE_EREG_RDP); rcvList = get_uint16( ramBase + NETWAVE_EREG_RDP + 2); - + if (rcvLen < 0) { - printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n", + printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n", rcvLen); return 0; } - + skb = dev_alloc_skb(rcvLen+5); if (skb == NULL) { pr_debug("netwave_rx: Could not allocate an sk_buff of " @@ -1233,21 +1233,21 @@ static int netwave_rx(struct net_device *dev) /* Copy packet fragments to the skb data area */ ptr = (u_char*) skb->data; curBuffer = rcvList; - tmpcount = 0; + tmpcount = 0; while ( tmpcount < rcvLen) { /* Get length and offset of current buffer */ dataCount = get_uint16( ramBase+curBuffer+2); dataOffset = get_uint16( ramBase+curBuffer+4); - + copy_from_pc( ptr + tmpcount, ramBase+curBuffer+dataOffset, dataCount); tmpcount += dataCount; - + /* Point to next buffer */ curBuffer = get_uint16(ramBase + curBuffer); } - + skb->protocol = eth_type_trans(skb,dev); /* Queue packet for network layer */ netif_rx(skb); @@ -1269,7 +1269,7 @@ static int netwave_open(struct net_device *dev) { struct pcmcia_device *link = priv->p_dev; dev_dbg(&link->dev, "netwave_open: starting.\n"); - + if (!pcmcia_dev_present(link)) return -ENODEV; @@ -1277,7 +1277,7 @@ static int netwave_open(struct net_device *dev) { netif_start_queue(dev); netwave_reset(dev); - + return 0; } @@ -1336,7 +1336,7 @@ static void set_multicast_list(struct net_device *dev) netwave_private *priv = netdev_priv(dev); u_char __iomem * ramBase = priv->ramBase; u_char rcvMode = 0; - + #ifdef PCMCIA_DEBUG { xstatic int old; @@ -1347,7 +1347,7 @@ static void set_multicast_list(struct net_device *dev) } } #endif - + if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI)) { /* Multicast Mode */ rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast; @@ -1358,7 +1358,7 @@ static void set_multicast_list(struct net_device *dev) /* Normal mode */ rcvMode = rxConfRxEna + rxConfBcast; } - + /* printk("netwave set_multicast_list: rcvMode to %x\n", rcvMode);*/ /* Now set receive mode */ wait_WOC(iobase); -- 1.7.0.3
_______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
