From: Maurice Dawson <mauricedawson2699@xxxxxxxxxxxxxx>
This is a Patch to the adv_pci1723.c file that fixes up brace, print(k) and over 80 character warnings found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/comedi/drivers/adv_pci1723.c | 149 +++++++++++++++-----------
1 files changed, 87 insertions(+), 62 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index 6b0b7ed..1644490 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -60,35 +60,57 @@ TODO:
#define IORANGE_1723 0x2A
/* all the registers for the pci1723 board */
-#define PCI1723_DA(N) ((N)<<1) /* W: D/A register N (0 to 7) */
-
-#define PCI1723_SYN_SET 0x12 /*synchronized set register */
-#define PCI1723_ALL_CHNNELE_SYN_STROBE 0x12 /*synchronized status register */
-
-#define PCI1723_RANGE_CALIBRATION_MODE 0x14 /* range and calibration mode */
-#define PCI1723_RANGE_CALIBRATION_STATUS 0x14 /* range and calibration status */
-
-#define PCI1723_CONTROL_CMD_CALIBRATION_FUN 0x16 /* SADC control command for calibration function */
-#define PCI1723_STATUS_CMD_CALIBRATION_FUN 0x16 /* SADC control status for calibration function */
-
-#define PCI1723_CALIBRATION_PARA_STROBE 0x18 /* Calibration parameter strobe */
+#define PCI1723_DA(N) ((N)<<1) /* W: D/A register N (0 to 7) */
+
+#define PCI1723_SYN_SET 0x12 /* synchronized set register */
+#define PCI1723_ALL_CHNNELE_SYN_STROBE 0x12
+ /* synchronized status register */
+
+#define PCI1723_RANGE_CALIBRATION_MODE 0x14
+ /* range and calibration mode */
+#define PCI1723_RANGE_CALIBRATION_STATUS 0x14
+ /* range and calibration status */
+
+#define PCI1723_CONTROL_CMD_CALIBRATION_FUN 0x16
+ /*
+ * SADC control command for
+ * calibration function
+ */
+#define PCI1723_STATUS_CMD_CALIBRATION_FUN 0x16
+ /*
+ * SADC control status for
+ * calibration function
+ */
+
+#define PCI1723_CALIBRATION_PARA_STROBE 0x18
+ /* Calibration parameter strobe */
#define PCI1723_DIGITAL_IO_PORT_SET 0x1A /* Digital I/O port setting */
#define PCI1723_DIGITAL_IO_PORT_MODE 0x1A /* Digital I/O port mode */
-#define PCI1723_WRITE_DIGITAL_OUTPUT_CMD 0x1C /* Write digital output command */
+#define PCI1723_WRITE_DIGITAL_OUTPUT_CMD 0x1C
+ /* Write digital output command */
#define PCI1723_READ_DIGITAL_INPUT_DATA 0x1C /* Read digital input data */
-#define PCI1723_WRITE_CAL_CMD 0x1E /* Write calibration command */
-#define PCI1723_READ_CAL_STATUS 0x1E /* Read calibration status */
+#define PCI1723_WRITE_CAL_CMD 0x1E /* Write calibration command */
+#define PCI1723_READ_CAL_STATUS 0x1E /* Read calibration status */
-#define PCI1723_SYN_STROBE 0x20 /* Synchronized strobe */
+#define PCI1723_SYN_STROBE 0x20 /* Synchronized strobe */
-#define PCI1723_RESET_ALL_CHN_STROBE 0x22 /* Reset all D/A channels strobe */
+#define PCI1723_RESET_ALL_CHN_STROBE 0x22
+ /* Reset all D/A channels strobe */
-#define PCI1723_RESET_CAL_CONTROL_STROBE 0x24 /* Reset the calibration controller strobe */
+#define PCI1723_RESET_CAL_CONTROL_STROBE 0x24
+ /*
+ * Reset the calibration
+ * controller strobe
+ */
-#define PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE 0x26 /* Change D/A channels output type strobe */
+#define PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE 0x26
+ /*
+ * Change D/A channels output
+ * type strobe
+ */
#define PCI1723_SELECT_CALIBRATION 0x28 /* Select the calibration Ref_V */
@@ -104,14 +126,14 @@ static const struct comedi_lrange range_pci1723 = { 1, {
*/
struct pci1723_board {
const char *name;
- int vendor_id; /* PCI vendor a device ID of card */
+ int vendor_id; /* PCI vendor a device ID of card */
int device_id;
int iorange;
char cardtype;
- int n_aochan; /* num of D/A chans */
- int n_diochan; /* num of DIO chans */
- int ao_maxdata; /* resolution of D/A */
- const struct comedi_lrange *rangelist_ao; /* rangelist for D/A */
+ int n_aochan; /* num of D/A chans */
+ int n_diochan; /* num of DIO chans */
+ int ao_maxdata; /* resolution of D/A */
+ const struct comedi_lrange *rangelist_ao; /* rangelist for D/A */
};
static const struct pci1723_board boardtypes[] = {
@@ -128,8 +150,10 @@ static const struct pci1723_board boardtypes[] = {
},
};
-/* This is used by modprobe to translate PCI IDs to drivers. Should
- * only be used for PCI and ISA-PnP devices */
+/*
+ * This is used by modprobe to translate PCI IDs to drivers.
+ * Should only be used for PCI and ISA-PnP devices
+ */
static DEFINE_PCI_DEVICE_TABLE(pci1723_pci_table) = {
{
PCI_VENDOR_ID_ADVANTECH, 0x1723, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
@@ -157,47 +181,47 @@ static struct comedi_driver driver_pci1723 = {
.detach = pci1723_detach,
};
-/* this structure is for data unique to this hardware driver. */
+/* This structure is for data unique to this hardware driver. */
struct pci1723_private {
int valid; /* card is usable; */
struct pci_dev *pcidev;
- unsigned char da_range[8]; /* D/A output range for each channel */
+ unsigned char da_range[8]; /* D/A output range for each channel */
- short ao_data[8]; /* data output buffer */
+ short ao_data[8]; /* data output buffer */
};
-/*the following macro to make it easy to
-* access the private structure.
-*/
+/* The following macro to make it easy to access the private structure. */
#define devpriv ((struct pci1723_private *)dev->private)
#define this_board boardtypes
/*
- * the pci1723 card reset;
+ * The pci1723 card reset;
*/
static int pci1723_reset(struct comedi_device *dev)
{
int i;
DPRINTK("adv_pci1723 EDBG: BGN: pci1723_reset(...)\n");
- outw(0x01, dev->iobase + PCI1723_SYN_SET); /* set synchronous output mode */
+ outw(0x01, dev->iobase + PCI1723_SYN_SET);
+ /* set synchronous output mode */
for (i = 0; i < 8; i++) {
- /* set all outputs to 0V */
+ /* set all outputs to 0V */
devpriv->ao_data[i] = 0x8000;
outw(devpriv->ao_data[i], dev->iobase + PCI1723_DA(i));
- /* set all ranges to +/- 10V */
+ /* set all ranges to +/- 10V */
devpriv->da_range[i] = 0;
outw(((devpriv->da_range[i] << 4) | i),
PCI1723_RANGE_CALIBRATION_MODE);
}
- outw(0, dev->iobase + PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE); /* update ranges */
- outw(0, dev->iobase + PCI1723_SYN_STROBE); /* update outputs */
+ outw(0, dev->iobase + PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE);
+ /* update ranges */
+ outw(0, dev->iobase + PCI1723_SYN_STROBE); /* update outputs */
- /* set asynchronous output mode */
+ /* set asynchronous output mode */
outw(0, dev->iobase + PCI1723_SYN_SET);
DPRINTK("adv_pci1723 EDBG: END: pci1723_reset(...)\n");
@@ -251,11 +275,11 @@ static int pci1723_dio_insn_config(struct comedi_device *dev,
unsigned short dio_mode;
mask = 1 << CR_CHAN(insn->chanspec);
- if (mask & 0x00FF) {
+ if (mask & 0x00FF)
bits = 0x00FF;
- } else {
+ else
bits = 0xFF00;
- }
+
switch (data[0]) {
case INSN_CONFIG_DIO_INPUT:
s->io_bits &= ~bits;
@@ -270,12 +294,12 @@ static int pci1723_dio_insn_config(struct comedi_device *dev,
return -EINVAL;
}
- /* update hardware DIO mode */
- dio_mode = 0x0000; /* low byte output, high byte output */
+ /* update hardware DIO mode */
+ dio_mode = 0x0000; /* low byte output, high byte output */
if ((s->io_bits & 0x00FF) == 0)
- dio_mode |= 0x0001; /* low byte input */
+ dio_mode |= 0x0001; /* low byte input */
if ((s->io_bits & 0xFF00) == 0)
- dio_mode |= 0x0002; /* high byte input */
+ dio_mode |= 0x0002; /* high byte input */
outw(dio_mode, dev->iobase + PCI1723_DIGITAL_IO_PORT_SET);
return 1;
}
@@ -311,7 +335,8 @@ static int pci1723_attach(struct comedi_device *dev,
int opt_bus, opt_slot;
const char *errstr;
- printk("comedi%d: adv_pci1723: board=%s", dev->minor, this_board->name);
+ printk(KERN_ERR "comedi%d: adv_pci1723: board=%s",
+ dev->minor, this_board->name);
opt_bus = it->options[0];
opt_slot = it->options[1];
@@ -349,10 +374,10 @@ static int pci1723_attach(struct comedi_device *dev,
if (!pcidev) {
if (opt_bus || opt_slot) {
- printk(" - Card at b:s %d:%d %s\n",
- opt_bus, opt_slot, errstr);
+ printk(KERN_ERR " - Card at b:s %d:%d %s\n",
+ opt_bus, opt_slot, errstr);
} else {
- printk(" - Card %s\n", errstr);
+ printk(KERN_ERR " - Card %s\n", errstr);
}
return -EIO;
}
@@ -362,8 +387,8 @@ static int pci1723_attach(struct comedi_device *dev,
pci_func = PCI_FUNC(pcidev->devfn);
iobase = pci_resource_start(pcidev, 2);
- printk(", b:s:f=%d:%d:%d, io=0x%4x", pci_bus, pci_slot, pci_func,
- iobase);
+ printk(KERN_ERR ", b:s:f=%d:%d:%d, io=0x%4x",
+ pci_bus, pci_slot, pci_func, iobase);
dev->iobase = iobase;
@@ -398,22 +423,23 @@ static int pci1723_attach(struct comedi_device *dev,
s->insn_write = pci1723_ao_write_winsn;
s->insn_read = pci1723_insn_read_ao;
- /* read DIO config */
- switch (inw(dev->iobase + PCI1723_DIGITAL_IO_PORT_MODE) & 0x03) {
- case 0x00: /* low byte output, high byte output */
+ /* read DIO config */
+ switch (inw(dev->iobase + PCI1723_DIGITAL_IO_PORT_MODE)
+ & 0x03) {
+ case 0x00: /* low byte output, high byte output */
s->io_bits = 0xFFFF;
break;
- case 0x01: /* low byte input, high byte output */
+ case 0x01: /* low byte input, high byte output */
s->io_bits = 0xFF00;
break;
- case 0x02: /* low byte output, high byte input */
+ case 0x02: /* low byte output, high byte input */
s->io_bits = 0x00FF;
break;
- case 0x03: /* low byte input, high byte input */
+ case 0x03: /* low byte input, high byte input */
s->io_bits = 0x0000;
break;
}
- /* read DIO port state */
+ /* read DIO port state */
s->state = inw(dev->iobase + PCI1723_READ_DIGITAL_INPUT_DATA);
subdev++;
@@ -450,16 +476,15 @@ static int pci1723_attach(struct comedi_device *dev,
*/
static int pci1723_detach(struct comedi_device *dev)
{
- printk("comedi%d: pci1723: remove\n", dev->minor);
+ printk(KERN_ERR "comedi%d: pci1723: remove\n", dev->minor);
if (dev->private) {
if (devpriv->valid)
pci1723_reset(dev);
if (devpriv->pcidev) {
- if (dev->iobase) {
+ if (dev->iobase)
comedi_pci_disable(devpriv->pcidev);
- }
pci_dev_put(devpriv->pcidev);
}
}
--
1.7.0.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
