This is a resend of a patch I posted couple of weeks ago. This patch implements a clocksource for HyperV. This patch depends on the HyperV detection patch I had posted earler.
From: K. Y. Srinivasan <ksrinivasan@xxxxxxxxxx>
Subject: A clocksource for Linux guests hosted on HyperV.
References: None
Patch-mainline:
This patch is a clocksource implementation suitable for guests hosted on HyperV.
Time keeping in Linux guests hosted on HyperV is unstable. This clocksource
driver fixes the problem.
Signed-off-by: K. Y. Srinivasan <ksrinivasan@xxxxxxxxxx>
Index: linux-2.6.34-rc4/drivers/staging/hv/hv_timesource.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.34-rc4/drivers/staging/hv/hv_timesource.c 2010-04-15 13:45:46.000000000 -0600
@@ -0,0 +1,97 @@
+/*
+ * A clocksource for Linux running on HyperV.
+ *
+ *
+ * Copyright (C) 2010, Novell, Inc.
+ * Author : K. Y. Srinivasan <ksrinivasan@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dmi.h>
+#include <asm/hyperv.h>
+
+#define HV_CLOCK_SHIFT 22
+
+static cycle_t read_hv_clock(struct clocksource *arg)
+{
+ cycle_t current_tick;
+ /*
+ * Read the partition counter to get the current tick count. This count
+ * is set to 0 when the partition is created and is incremented in
+ * 100 nanosecond units.
+ */
+ rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
+ return current_tick;
+}
+
+static struct clocksource hyperv_cs = {
+ .name = "hyperv_clocksource",
+ .rating = 400, /* use this when running on Hyperv*/
+ .read = read_hv_clock,
+ .mask = CLOCKSOURCE_MASK(64),
+ /*
+ * The time ref counter in HyperV is in 100ns units.
+ * The definition of mult is:
+ * mult/2^shift = ns/cyc = 100
+ * mult = (100 << shift)
+ */
+ .mult = (100 << HV_CLOCK_SHIFT),
+ .shift = HV_CLOCK_SHIFT,
+};
+
+static const struct dmi_system_id __initconst
+hv_timesource_dmi_table[] __maybe_unused = {
+ {
+ .ident = "Hyper-V",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+ DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
+ },
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(dmi, hv_timesource_dmi_table);
+
+static const struct pci_device_id __initconst
+hv_timesource_pci_table[] __maybe_unused = {
+ { PCI_DEVICE(0x1414, 0x5353) }, /* VGA compatible controller */
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, hv_timesource_pci_table);
+
+
+static int __init init_hv_clocksource(void)
+{
+ if ((boot_cpu_data.x86_hyper_vendor != X86_HYPER_VENDOR_MSFT) ||
+ !(boot_cpu_data.x86_hyper_features &
+ HV_X64_MSR_TIME_REF_COUNT_AVAILABLE))
+ return -ENODEV;
+ printk(KERN_INFO "Registering HyperV clock source\n");
+ return clocksource_register(&hyperv_cs);
+}
+
+module_init(init_hv_clocksource);
+MODULE_DESCRIPTION("HyperV based clocksource");
+MODULE_AUTHOR("K. Y. Srinivasan <ksrinivasan@xxxxxxxxxx>");
+MODULE_LICENSE("GPL");
Index: linux-2.6.34-rc4/drivers/staging/hv/Makefile
===================================================================
--- linux-2.6.34-rc4.orig/drivers/staging/hv/Makefile 2010-04-12 19:41:35.000000000 -0600
+++ linux-2.6.34-rc4/drivers/staging/hv/Makefile 2010-04-15 13:09:07.000000000 -0600
@@ -1,4 +1,4 @@
-obj-$(CONFIG_HYPERV) += hv_vmbus.o
+obj-$(CONFIG_HYPERV) += hv_vmbus.o hv_timesource.o
obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o
obj-$(CONFIG_HYPERV_BLOCK) += hv_blkvsc.o
obj-$(CONFIG_HYPERV_NET) += hv_netvsc.o
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
