Re: [PATCH] Staging: rtl8192e: fix spacing style issues in r8180_93cx6.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 04, 2010 at 07:57:09PM +0000, Tim Schofield wrote:
> >From ffe4ef649fc0bcd553d8901492a5385a42be585a Mon Sep 17 00:00:00 2001
> From: Tim Schofield <tim@xxxxxxxxxxxxxxxx>
> Date: Thu, 4 Feb 2010 18:28:48 +0000
> Subject: [PATCH] Staging: rtl8192e: fix spacing style issues in r8180_93cx6.c
>  This is a patch to the r8180_93cx6.c file that fixes up spacing issue warnings found by the checkpatch.pl tool
>  Signed-off-by: Tim Schofield <tim@xxxxxxxxxxxxxxxx>
> 
> ---
>  drivers/staging/rtl8192e/r8180_93cx6.c |   63 ++++++++++++++++----------------
>  1 files changed, 32 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/staging/rtl8192e/r8180_93cx6.c b/drivers/staging/rtl8192e/r8180_93cx6.c
> index 79f7a0f..262ed5f 100644
> --- a/drivers/staging/rtl8192e/r8180_93cx6.c
> +++ b/drivers/staging/rtl8192e/r8180_93cx6.c
> @@ -22,7 +22,7 @@
>  
>  static void eprom_cs(struct net_device *dev, short bit)
>  {
> -	if(bit)
> +	if (bit)
>  		write_nic_byte(dev, EPROM_CMD,
>  			       (1<<EPROM_CS_SHIFT) | \
>  			       read_nic_byte(dev, EPROM_CMD)); //enable EPROM
> @@ -38,23 +38,23 @@ static void eprom_cs(struct net_device *dev, short bit)
>  static void eprom_ck_cycle(struct net_device *dev)
>  {
>  	write_nic_byte(dev, EPROM_CMD,
> -		       (1<<EPROM_CK_SHIFT) | read_nic_byte(dev,EPROM_CMD));
> +		       (1<<EPROM_CK_SHIFT) | read_nic_byte(dev, EPROM_CMD));
>  	force_pci_posting(dev);
>  	udelay(EPROM_DELAY);
>  	write_nic_byte(dev, EPROM_CMD,
> -		       read_nic_byte(dev, EPROM_CMD) &~ (1<<EPROM_CK_SHIFT));
> +		       read_nic_byte(dev, EPROM_CMD) & ~(1<<EPROM_CK_SHIFT));
>  	force_pci_posting(dev);
>  	udelay(EPROM_DELAY);
>  }
>  
>  
> -static void eprom_w(struct net_device *dev,short bit)
> +static void eprom_w(struct net_device *dev, short bit)
>  {
> -	if(bit)
> +	if (bit)
>  		write_nic_byte(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) | \
> -			       read_nic_byte(dev,EPROM_CMD));
> +			       read_nic_byte(dev, EPROM_CMD));
>  	else
> -		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev,EPROM_CMD)\
> +		write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
>  			       &~(1<<EPROM_W_SHIFT));
>  
>  	force_pci_posting(dev);
> @@ -66,10 +66,11 @@ static short eprom_r(struct net_device *dev)
>  {
>  	short bit;
>  
> -	bit=(read_nic_byte(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT) );
> +	bit = (read_nic_byte(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT));
>  	udelay(EPROM_DELAY);
>  
> -	if(bit) return 1;
> +	if (bit)
> +		return 1;
>  	return 0;
>  }
>  
> @@ -78,7 +79,7 @@ static void eprom_send_bits_string(struct net_device *dev, short b[], int len)
>  {
>  	int i;
>  
> -	for(i=0; i<len; i++){
> +	for (i = 0; i < len; i++) {
>  		eprom_w(dev, b[i]);
>  		eprom_ck_cycle(dev);
>  	}
> @@ -88,37 +89,37 @@ static void eprom_send_bits_string(struct net_device *dev, short b[], int len)
>  u32 eprom_read(struct net_device *dev, u32 addr)
>  {
>  	struct r8192_priv *priv = ieee80211_priv(dev);
> -	short read_cmd[]={1,1,0};
> +	short read_cmd[] = {1, 1, 0};
>  	short addr_str[8];
>  	int i;
>  	int addr_len;
>  	u32 ret;
>  
> -	ret=0;
> +	ret = 0;
>          //enable EPROM programming
>  	write_nic_byte(dev, EPROM_CMD,
>  		       (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
>  	force_pci_posting(dev);
>  	udelay(EPROM_DELAY);
>  
> -	if (priv->epromtype==EPROM_93c56){
> -		addr_str[7]=addr & 1;
> -		addr_str[6]=addr & (1<<1);
> -		addr_str[5]=addr & (1<<2);
> -		addr_str[4]=addr & (1<<3);
> -		addr_str[3]=addr & (1<<4);
> -		addr_str[2]=addr & (1<<5);
> -		addr_str[1]=addr & (1<<6);
> -		addr_str[0]=addr & (1<<7);
> -		addr_len=8;
> -	}else{
> -		addr_str[5]=addr & 1;
> -		addr_str[4]=addr & (1<<1);
> -		addr_str[3]=addr & (1<<2);
> -		addr_str[2]=addr & (1<<3);
> -		addr_str[1]=addr & (1<<4);
> -		addr_str[0]=addr & (1<<5);
> -		addr_len=6;
> +	if (priv->epromtype == EPROM_93c56) {
> +		addr_str[7] = addr & 1;
> +		addr_str[6] = addr & (1<<1);
> +		addr_str[5] = addr & (1<<2);
> +		addr_str[4] = addr & (1<<3);
> +		addr_str[3] = addr & (1<<4);
> +		addr_str[2] = addr & (1<<5);
> +		addr_str[1] = addr & (1<<6);
> +		addr_str[0] = addr & (1<<7);
> +		addr_len = 8;
> +	} else {
> +		addr_str[5] = addr & 1;
> +		addr_str[4] = addr & (1<<1);
> +		addr_str[3] = addr & (1<<2);
> +		addr_str[2] = addr & (1<<3);
> +		addr_str[1] = addr & (1<<4);
> +		addr_str[0] = addr & (1<<5);
> +		addr_len = 6;
>  	}
>  	eprom_cs(dev, 1);
>  	eprom_ck_cycle(dev);
> @@ -129,7 +130,7 @@ u32 eprom_read(struct net_device *dev, u32 addr)
>  	//I'm unsure if it is necessary, but anyway shouldn't hurt
>  	eprom_w(dev, 0);
>  
> -	for(i=0;i<16;i++){
> +	for (i = 0; i < 16; i++) {
>  		//eeprom needs a clk cycle between writing opcode&adr
>  		//and reading data. (eeprom outs a dummy 0)
>  		eprom_ck_cycle(dev);
> -- 
> 1.6.3.3
> 

Looks good :) nice work

Reviewed-by: Vikram Dhillon <opensolarisdev@xxxxxxxxx>
	
-- 
Regards,
Vikram Dhillon

There is poetry and there is beauty in real sympathy; but there is more — there is action. The noblest and most powerful form of sympathy is not merely the responsive tear, the echoed sigh, the answering look; it is the embodiment of the sentiment in actual help. 

Attachment: signature.asc
Description: Digital signature

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel

[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux