I fixed all problems reported by checkpatch.pl except some
long lines.
Signed-off-by: Lars Lindley <lindley@xxxxxxxxxx>
---
drivers/staging/winbond/mds_s.h | 173 +++++++++++++++++++--------------------
1 files changed, 86 insertions(+), 87 deletions(-)
diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h
index 217ff08..89328c5 100644
--- a/drivers/staging/winbond/mds_s.h
+++ b/drivers/staging/winbond/mds_s.h
@@ -15,122 +15,121 @@ enum {
WLAN_PREAMBLE_TYPE_LONG,
};
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define MAX_USB_TX_DESCRIPTOR 15 // IS89C35 ability
-#define MAX_USB_TX_BUFFER_NUMBER 4 // Virtual pre-buffer number of MAX_USB_TX_BUFFER
-#define MAX_USB_TX_BUFFER 4096 // IS89C35 ability 4n alignment is required for hardware
+/*****************************************************************************/
+#define MAX_USB_TX_DESCRIPTOR 15 /* IS89C35 ability */
+#define MAX_USB_TX_BUFFER_NUMBER 4 /* Virtual pre-buffer number of MAX_USB_TX_BUFFER */
+#define MAX_USB_TX_BUFFER 4096 /* IS89C35 ability 4n alignment is required for hardware */
-#define AUTH_REQUEST_PAIRWISE_ERROR 0 // _F flag setting
-#define AUTH_REQUEST_GROUP_ERROR 1 // _F flag setting
+#define AUTH_REQUEST_PAIRWISE_ERROR 0 /* _F flag setting */
+#define AUTH_REQUEST_GROUP_ERROR 1 /* _F flag setting */
-#define CURRENT_FRAGMENT_THRESHOLD (adapter->Mds.TxFragmentThreshold & ~0x1)
-#define CURRENT_PREAMBLE_MODE psLOCAL->boShortPreamble?WLAN_PREAMBLE_TYPE_SHORT:WLAN_PREAMBLE_TYPE_LONG
-#define CURRENT_TX_RATE_FOR_MNG adapter->sLocalPara.CurrentTxRateForMng
-#define CURRENT_PROTECT_MECHANISM psLOCAL->boProtectMechanism
-#define CURRENT_RTS_THRESHOLD adapter->Mds.TxRTSThreshold
+#define CURRENT_FRAGMENT_THRESHOLD (adapter->Mds.TxFragmentThreshold & ~0x1)
+#define CURRENT_PREAMBLE_MODE (psLOCAL->boShortPreamble ? WLAN_PREAMBLE_TYPE_SHORT : WLAN_PREAMBLE_TYPE_LONG)
+#define CURRENT_TX_RATE_FOR_MNG (adapter->sLocalPara.CurrentTxRateForMng)
+#define CURRENT_PROTECT_MECHANISM (psLOCAL->boProtectMechanism)
+#define CURRENT_RTS_THRESHOLD (adapter->Mds.TxRTSThreshold)
-#define MIB_GS_XMIT_OK_INC adapter->sLocalPara.GS_XMIT_OK++
-#define MIB_GS_RCV_OK_INC adapter->sLocalPara.GS_RCV_OK++
-#define MIB_GS_XMIT_ERROR_INC adapter->sLocalPara.GS_XMIT_ERROR
+#define MIB_GS_XMIT_OK_INC (adapter->sLocalPara.GS_XMIT_OK++)
+#define MIB_GS_RCV_OK_INC (adapter->sLocalPara.GS_RCV_OK++)
+#define MIB_GS_XMIT_ERROR_INC (adapter->sLocalPara.GS_XMIT_ERROR)
-//---------- TX -----------------------------------
+/* ---------- TX ----------------------------------- */
#define ETHERNET_TX_DESCRIPTORS MAX_USB_TX_BUFFER_NUMBER
-//---------- RX ------------------------------------
-#define ETHERNET_RX_DESCRIPTORS 8 //It's not necessary to allocate more than 2 in sync indicate
-
-//================================================================
-// Configration default value
-//================================================================
-#define DEFAULT_MULTICASTLISTMAX 32 // standard
-#define DEFAULT_TX_BURSTLENGTH 3 // 32 Longwords
-#define DEFAULT_RX_BURSTLENGTH 3 // 32 Longwords
-#define DEFAULT_TX_THRESHOLD 0 // Full Packet
-#define DEFAULT_RX_THRESHOLD 0 // Full Packet
-#define DEFAULT_MAXTXRATE 6 // 11 Mbps (Long)
-#define DEFAULT_CHANNEL 3 // Chennel 3
-#define DEFAULT_RTSThreshold 2347 // Disable RTS
-//#define DEFAULT_PME 1 // Enable
-#define DEFAULT_PME 0 // Disable
-#define DEFAULT_SIFSTIME 10
-#define DEFAULT_ACKTIME_1ML 304 // 148+44+112 911220 by LCC
-#define DEFAULT_ACKTIME_2ML 248 // 148+44+56 911220 by LCC
-#define DEFAULT_FRAGMENT_THRESHOLD 2346 // No fragment
-#define DEFAULT_PREAMBLE_LENGTH 72
+/* ---------- RX ----------------------------------- */
+#define ETHERNET_RX_DESCRIPTORS 8 /* It's not necessary to allocate more than 2 in sync indicate */
+
+/*
+ * ================================================================
+ * Configration default value
+ * ================================================================
+ */
+#define DEFAULT_MULTICASTLISTMAX 32 /* standard */
+#define DEFAULT_TX_BURSTLENGTH 3 /* 32 Longwords */
+#define DEFAULT_RX_BURSTLENGTH 3 /* 32 Longwords */
+#define DEFAULT_TX_THRESHOLD 0 /* Full Packet */
+#define DEFAULT_RX_THRESHOLD 0 /* Full Packet */
+#define DEFAULT_MAXTXRATE 6 /* 11 Mbps (Long) */
+#define DEFAULT_CHANNEL 3 /* Chennel 3 */
+#define DEFAULT_RTSThreshold 2347 /* Disable RTS */
+#define DEFAULT_PME 0 /* Disable */
+#define DEFAULT_SIFSTIME 10
+#define DEFAULT_ACKTIME_1ML 304 /* 148 + 44 + 112 */
+#define DEFAULT_ACKTIME_2ML 248 /* 148 + 44 + 56 */
+#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */
+#define DEFAULT_PREAMBLE_LENGTH 72
#define DEFAULT_PLCPHEADERTIME_LENGTH 24
-/*------------------------------------------------------------------------
- 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns
- instead of 960 ns. This shall be fixed in the future W89C32
- -------------------------------------------------------------------------*/
-#define DEFAULT_MAX_RECEIVE_TIME 16440000
+/*
+ * ------------------------------------------------------------------------
+ * 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns
+ * instead of 960 ns. This shall be fixed in the future W89C32
+ * -------------------------------------------------------------------------
+ */
+#define DEFAULT_MAX_RECEIVE_TIME 16440000
-#define RX_BUF_SIZE 2352 // 600 // For 301 must be multiple of 8
-#define MAX_RX_DESCRIPTORS 18 // Rx Layer 2
+#define RX_BUF_SIZE 2352 /* 600 - For 301 must be multiple of 8 */
+#define MAX_RX_DESCRIPTORS 18 /* Rx Layer 2 */
+/* For brand-new rx system */
+#define MDS_ID_IGNORE ETHERNET_RX_DESCRIPTORS
-// For brand-new rx system
-#define MDS_ID_IGNORE ETHERNET_RX_DESCRIPTORS
-
-// For Tx Packet status classify
-#define PACKET_FREE_TO_USE 0
-#define PACKET_COME_FROM_NDIS 0x08
-#define PACKET_COME_FROM_MLME 0x80
-#define PACKET_SEND_COMPLETE 0xff
+/* For Tx Packet status classify */
+#define PACKET_FREE_TO_USE 0
+#define PACKET_COME_FROM_NDIS 0x08
+#define PACKET_COME_FROM_MLME 0x80
+#define PACKET_SEND_COMPLETE 0xff
struct wb35_mds {
- // For Tx usage
- u8 TxOwner[ ((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03) ];
+ /* For Tx usage */
+ u8 TxOwner[((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03)];
u8 *pTxBuffer;
- u16 TxBufferSize[ ((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01) ];
- u8 TxDesFrom[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ];//931130.4.u // 1: MLME 2: NDIS control 3: NDIS data
- u8 TxCountInBuffer[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ]; // 20060928
+ u16 TxBufferSize[((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01)];
+ u8 TxDesFrom[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)];/* 1: MLME 2: NDIS control 3: NDIS data */
+ u8 TxCountInBuffer[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)];
- u8 TxFillIndex;//the next index of TxBuffer can be used
- u8 TxDesIndex;//The next index of TxDes can be used
- u8 ScanTxPause; //data Tx pause because the scanning is progressing, but probe request Tx won't.
- u8 TxPause;//For pause the Mds_Tx modult
+ u8 TxFillIndex; /* the next index of TxBuffer can be used */
+ u8 TxDesIndex; /* The next index of TxDes can be used */
+ u8 ScanTxPause; /* data Tx pause because the scanning is progressing, but probe request Tx won't. */
+ u8 TxPause; /*For pause the Mds_Tx modult */
- atomic_t TxThreadCount;//For thread counting 931130.4.v
-//950301 delete due to HW
-// atomic_t TxConcurrentCount;//931130.4.w
+ atomic_t TxThreadCount; /* For thread counting */
- u16 TxResult[ ((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01) ];//Collect the sending result of Mpdu
+ u16 TxResult[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)];/* Collect the sending result of Mpdu */
- u8 MicRedundant[8]; // For tmp use
- u8 *MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment
+ u8 MicRedundant[8]; /* For tmp use */
+ u8 *MicWriteAddress[2]; /* The start address to fill the Mic, use 2 point due to Mic maybe fragment */
- u16 MicWriteSize[2]; //931130.4.x
+ u16 MicWriteSize[2];
- u16 MicAdd; // If want to add the Mic, this variable equal to 8
- u16 MicWriteIndex;//The number of MicWriteAddress 931130.4.y
+ u16 MicAdd; /* If want to add the Mic, this variable equal to 8 */
+ u16 MicWriteIndex; /* The number of MicWriteAddress */
- u8 TxRate[ ((MAX_USB_TX_DESCRIPTOR+1)&~0x01) ][2]; // [0] current tx rate, [1] fall back rate
- u8 TxInfo[ ((MAX_USB_TX_DESCRIPTOR+1)&~0x01) ]; //Store information for callback function
+ u8 TxRate[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)][2]; /* [0] current tx rate, [1] fall back rate */
+ u8 TxInfo[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)]; /*Store information for callback function */
- //WKCHEN added for scanning mechanism
- u8 TxToggle; //It is TRUE if there are tx activities in some time interval
+ /* for scanning mechanism */
+ u8 TxToggle; /* It is TRUE if there are tx activities in some time interval */
u8 Reserved_[3];
- //---------- for Tx Parameter
- u16 TxFragmentThreshold; // For frame body only
+ /* ---- for Tx Parameter */
+ u16 TxFragmentThreshold; /* For frame body only */
u16 TxRTSThreshold;
- u32 MaxReceiveTime;//911220.3 Add
-
- // depend on OS,
- u32 MulticastListNo;
- u32 PacketFilter; // Setting by NDIS, the current packet filter in use.
- u8 MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH];
+ u32 MaxReceiveTime;
- //COUNTERMEASURE
- u8 bMICfailCount;
- u8 boCounterMeasureBlock;
- u8 reserved_4[2];
+ /* depend on OS, */
+ u32 MulticastListNo;
+ u32 PacketFilter; /* Setting by NDIS, the current packet filter in use. */
+ u8 MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH];
- u32 TxTsc; // 20060214
- u32 TxTsc_2; // 20060214
+ /* COUNTERMEASURE */
+ u8 bMICfailCount;
+ u8 boCounterMeasureBlock;
+ u8 reserved_4[2];
+ u32 TxTsc;
+ u32 TxTsc_2;
};
#endif
--
1.7.0.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
