From: Benjamin Adolphi <b.adolphi@xxxxxxxxxxxxxx> This fixes some checkpatch issues and some spelling mistakes in the c6xdigio comedi driver. Signed-off-by: Benjamin Adolphi <b.adolphi@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx> --- drivers/staging/comedi/drivers/c6xdigio.c | 57 ++++++++++++++--------------- 1 files changed, 28 insertions(+), 29 deletions(-) diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c index abb0532..fb0d5fa 100644 --- a/drivers/staging/comedi/drivers/c6xdigio.c +++ b/drivers/staging/comedi/drivers/c6xdigio.c @@ -45,7 +45,7 @@ http://robot0.ge.uiuc.edu/~spong/mecha/ #include <linux/interrupt.h> #include <linux/timex.h> #include <linux/timer.h> -#include <asm/io.h> +#include <linux/io.h> #include <linux/pnp.h> #include "../comedidev.h" @@ -220,11 +220,11 @@ static int C6X_encInput(unsigned long baseAddr, unsigned channel) /* printk("Inside C6X_encInput\n"); */ enc.value = 0; - if (channel == 0) { + if (channel == 0) ppcmd = 0x48; - } else { + else ppcmd = 0x50; - } + WriteByteToHwPort(baseAddr, ppcmd); tmp = ReadByteFromHwPort(baseAddr + 1); while (((tmp & 0x80) == 0) && (timeout < C6XDIGIO_TIME_OUT)) { @@ -391,9 +391,8 @@ static int c6xdigio_ei_insn_read(struct comedi_device *dev, int n; int chan = CR_CHAN(insn->chanspec); - for (n = 0; n < insn->n; n++) { + for (n = 0; n < insn->n; n++) data[n] = (C6X_encInput(dev->iobase, chan) & 0xffffff); - } return n; } @@ -420,9 +419,9 @@ static void board_init(struct comedi_device *dev) static const struct pnp_device_id c6xdigio_pnp_tbl[] = { /* Standard LPT Printer Port */ - {.id = "PNP0400",.driver_data = 0}, + {.id = "PNP0400", .driver_data = 0}, /* ECP Printer Port */ - {.id = "PNP0401",.driver_data = 0}, + {.id = "PNP0401", .driver_data = 0}, {} }; @@ -452,15 +451,14 @@ static int c6xdigio_attach(struct comedi_device *dev, if (result < 0) return result; - /* Make sure that PnP ports gets activated */ + /* Make sure that PnP ports get activated */ pnp_register_driver(&c6xdigio_pnp_driver); irq = it->options[1]; - if (irq > 0) { + if (irq > 0) printk("comedi%d: irq = %u ignored\n", dev->minor, irq); - } else if (irq == 0) { + else if (irq == 0) printk("comedi%d: no irq\n", dev->minor); - } s = dev->subdevices + 0; /* pwm output subdevice */ @@ -483,19 +481,19 @@ static int c6xdigio_attach(struct comedi_device *dev, s->maxdata = 0xffffff; s->range_table = &range_unknown; - /* s = dev->subdevices + 2; */ + /* s = dev->subdevices + 2; */ /* pwm output subdevice */ - /* s->type = COMEDI_SUBD_COUNTER; // Not sure what to put here */ - /* s->subdev_flags = SDF_WRITEABLE; */ - /* s->n_chan = 1; */ - /* s->trig[0] = c6xdigio_ei_init; */ - /* s->insn_read = c6xdigio_ei_init_insn_read; */ - /* s->insn_write = c6xdigio_ei_init_insn_write; */ - /* s->maxdata = 0xFFFF; // Really just a don't care */ - /* s->range_table = &range_unknown; // Not sure what to put here */ - - /* I will call this init anyway but more than likely the DSP board will not be connect */ - /* when device driver is loaded. */ + /* s->type = COMEDI_SUBD_COUNTER; // Not sure what to put here */ + /* s->subdev_flags = SDF_WRITEABLE; */ + /* s->n_chan = 1; */ + /* s->trig[0] = c6xdigio_ei_init; */ + /* s->insn_read = c6xdigio_ei_init_insn_read; */ + /* s->insn_write = c6xdigio_ei_init_insn_write; */ + /* s->maxdata = 0xFFFF; // Really just a don't care */ + /* s->range_table = &range_unknown; // Not sure what to put here */ + + /* I will call this init anyway but more than likely the DSP board */ + /* will not be connected when device driver is loaded. */ board_init(dev); return 0; @@ -503,16 +501,17 @@ static int c6xdigio_attach(struct comedi_device *dev, static int c6xdigio_detach(struct comedi_device *dev) { -/* board_halt(dev); may not need this */ + /* board_halt(dev); may not need this */ printk("comedi%d: c6xdigio: remove\n", dev->minor); - if (dev->iobase) { + if (dev->iobase) release_region(dev->iobase, C6XDIGIO_SIZE); - } - if (dev->irq) { + + /* Not using IRQ so I am not sure if I need this */ + if (dev->irq) free_irq(dev->irq, dev); - } /* Not using IRQ so I am not sure if I need this */ + pnp_unregister_driver(&c6xdigio_pnp_driver); return 0; -- 1.7.0.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
