Re: Problem with auto-detecting a HV environment from within Linux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 25, 2010 at 06:37:05PM +0000, Haiyang Zhang wrote:
> > From: Greg KH [mailto:greg@xxxxxxxxx]
> > Sent: Thursday, February 25, 2010 12:36 PM
> > What does the following command output in a HV virtual system:
> > 	grep . /sys/bus/acpi/devices/*/modalias
> 
> /sys/bus/acpi/devices/VMBus:00/modalias:acpi:VMBus:
> 
> > How about DMI data?  Does the Host export any info there?  Is there
> > anything in the /sys/class/dmi/id/ directory?  If so, can you send the
> > output of:
> > 	cat /sys/class/dmi/id/modalias
> 
> dmi:bvnAmericanMegatrendsInc.:bvr090004:bd03/19/2009:svnMicrosoftCorporation:pnVirtualMachine:pvr7.0:rvnMicrosoftCorporation:rnVirtualMachine:rvr7.0:cvnMicrosoftCorporation:ct3:cvr7.0:

Nice, can we rely on this to be static?  Will the following structure always
match properly?

static struct dmi_system_id __initdata microsoft_hyperv_table[] = {
	{
		.ident = "hyperv",
		.matches = {
			DMI_MATCH(DMI_SYS_VENDOR, "MicrosoftCorporation"),
			DMI_MATCH(DMI_PRODUCT_NAME, "VirtualMachine"),
			DMI_MATCH(DMI_BOARD_NAME, "VirtualMachine"),
		},
	},
};

That would be good to match with, but I don't know if all distro tools
can properly handle DMI module stuff just yet.

> > And you are sure no PCI devices are present to key off of that are
> > never going to show up in a "physical" machine?
> 
> There is also a pci device as you said:
> 00:08.0 VGA compatible controller: Microsoft Corporation Device 5353 (prog-if 00 [VGA controller])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 11
>         Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]

Ah, nice.  Can we rely on this always being present?

If so, what is the vendor and product id of this device?

Is it:
	Vendor id 0x1414
or:
	Vendor id 0x045e

Microsoft has both assigned to them, and probably others.

Is the device id 0x5353?

You can see this by doing the following:
	lspci -n | grep 08\\.0
what is the output of that?

thanks,

greg k-h
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel

[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux