[PATCH 201/235] Staging: rt28x0: remove no longer needed common/cmm_data_2860.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/staging/rt2860/common/cmm_data_2860.c | 1199 -------------------------
 1 files changed, 0 insertions(+), 1199 deletions(-)
 delete mode 100644 drivers/staging/rt2860/common/cmm_data_2860.c

diff --git a/drivers/staging/rt2860/common/cmm_data_2860.c b/drivers/staging/rt2860/common/cmm_data_2860.c
deleted file mode 100644
index d3ae7ca..0000000
--- a/drivers/staging/rt2860/common/cmm_data_2860.c
+++ /dev/null
@@ -1,1199 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
-*/
-
-/*
-   All functions in this file must be PCI-depended, or you should out your function
-	in other files.
-
-*/
-#include "../rt_config.h"
-
-extern RTMP_RF_REGS RF2850RegTable[];
-extern UCHAR	NUM_OF_2850_CHNL;
-
-USHORT RtmpPCI_WriteTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	BOOLEAN			bIsLast,
-	OUT	USHORT			*FreeNumber)
-{
-
-	UCHAR			*pDMAHeaderBufVA;
-	USHORT			TxIdx, RetTxIdx;
-	PTXD_STRUC		pTxD;
-	UINT32			BufBasePaLow;
-	PRTMP_TX_RING	pTxRing;
-	USHORT			hwHeaderLen;
-
-	//
-	// get Tx Ring Resource
-	//
-	pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
-	TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
-	pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
-	BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-
-	// copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
-	if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
-	{
-		hwHeaderLen = pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
-	}
-	else
-	{
-		hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-	}
-	NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHeaderLen);
-
-	pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
-	pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-	//
-	// build Tx Descriptor
-	//
-
-	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-	NdisZeroMemory(pTxD, TXD_SIZE);
-
-	pTxD->SDPtr0 = BufBasePaLow;
-	pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding
-	pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
-	pTxD->SDLen1 = pTxBlk->SrcBufLen;
-	pTxD->LastSec0 = 0;
-	pTxD->LastSec1 = (bIsLast) ? 1 : 0;
-
-	RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-
-	RetTxIdx = TxIdx;
-	//
-	// Update Tx index
-	//
-	INC_RING_INDEX(TxIdx, TX_RING_SIZE);
-	pTxRing->TxCpuIdx = TxIdx;
-
-	*FreeNumber -= 1;
-
-	return RetTxIdx;
-}
-
-
-USHORT RtmpPCI_WriteSingleTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	BOOLEAN			bIsLast,
-	OUT	USHORT			*FreeNumber)
-{
-
-	UCHAR			*pDMAHeaderBufVA;
-	USHORT			TxIdx, RetTxIdx;
-	PTXD_STRUC		pTxD;
-	UINT32			BufBasePaLow;
-	PRTMP_TX_RING	pTxRing;
-	USHORT			hwHeaderLen;
-
-	//
-	// get Tx Ring Resource
-	//
-	pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
-	TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
-	pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
-	BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-
-	// copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
-	hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
-	NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHeaderLen);
-
-	pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
-	pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-	//
-	// build Tx Descriptor
-	//
-	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-
-	NdisZeroMemory(pTxD, TXD_SIZE);
-
-	pTxD->SDPtr0 = BufBasePaLow;
-	pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding
-	pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
-	pTxD->SDLen1 = pTxBlk->SrcBufLen;
-	pTxD->LastSec0 = 0;
-	pTxD->LastSec1 = (bIsLast) ? 1 : 0;
-
-	RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-
-	RetTxIdx = TxIdx;
-	//
-	// Update Tx index
-	//
-	INC_RING_INDEX(TxIdx, TX_RING_SIZE);
-	pTxRing->TxCpuIdx = TxIdx;
-
-	*FreeNumber -= 1;
-
-	return RetTxIdx;
-}
-
-
-USHORT RtmpPCI_WriteMultiTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			frameNum,
-	OUT	USHORT			*FreeNumber)
-{
-	BOOLEAN bIsLast;
-	UCHAR			*pDMAHeaderBufVA;
-	USHORT			TxIdx, RetTxIdx;
-	PTXD_STRUC		pTxD;
-	UINT32			BufBasePaLow;
-	PRTMP_TX_RING	pTxRing;
-	USHORT			hwHdrLen;
-	UINT32			firstDMALen;
-
-	bIsLast = ((frameNum == (pTxBlk->TotalFrameNum - 1)) ? 1 : 0);
-
-	//
-	// get Tx Ring Resource
-	//
-	pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
-	TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
-	pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
-	BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-
-	if (frameNum == 0)
-	{
-		// copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
-		if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
-			//hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
-			hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
-		else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
-			//hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD;
-			hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_ARALINK_HEADER_FIELD + pTxBlk->HdrPadLen + LENGTH_ARALINK_HEADER_FIELD;
-		else
-			//hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
-			hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
-		firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHdrLen;
-	}
-	else
-	{
-		firstDMALen = pTxBlk->MpduHeaderLen;
-	}
-
-	NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
-
-	pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
-	pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
-	//
-	// build Tx Descriptor
-	//
-	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-
-	NdisZeroMemory(pTxD, TXD_SIZE);
-
-	pTxD->SDPtr0 = BufBasePaLow;
-	pTxD->SDLen0 = firstDMALen; // include padding
-	pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
-	pTxD->SDLen1 = pTxBlk->SrcBufLen;
-	pTxD->LastSec0 = 0;
-	pTxD->LastSec1 = (bIsLast) ? 1 : 0;
-
-	RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-
-	RetTxIdx = TxIdx;
-	//
-	// Update Tx index
-	//
-	INC_RING_INDEX(TxIdx, TX_RING_SIZE);
-	pTxRing->TxCpuIdx = TxIdx;
-
-	*FreeNumber -= 1;
-
-	return RetTxIdx;
-
-}
-
-
-VOID RtmpPCI_FinalWriteTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	USHORT			totalMPDUSize,
-	IN	USHORT			FirstTxIdx)
-{
-
-	PTXWI_STRUC		pTxWI;
-	PRTMP_TX_RING	pTxRing;
-
-	//
-	// get Tx Ring Resource
-	//
-	pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
-	pTxWI = (PTXWI_STRUC) pTxRing->Cell[FirstTxIdx].DmaBuf.AllocVa;
-	pTxWI->MPDUtotalByteCount = totalMPDUSize;
-}
-
-
-VOID RtmpPCIDataLastTxIdx(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			QueIdx,
-	IN	USHORT			LastTxIdx)
-{
-	PTXD_STRUC		pTxD;
-	PRTMP_TX_RING	pTxRing;
-
-	//
-	// get Tx Ring Resource
-	//
-	pTxRing = &pAd->TxRing[QueIdx];
-
-	//
-	// build Tx Descriptor
-	//
-	pTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa;
-
-	pTxD->LastSec1 = 1;
-}
-
-
-USHORT	RtmpPCI_WriteFragTxResource(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	TX_BLK			*pTxBlk,
-	IN	UCHAR			fragNum,
-	OUT	USHORT			*FreeNumber)
-{
-	UCHAR			*pDMAHeaderBufVA;
-	USHORT			TxIdx, RetTxIdx;
-	PTXD_STRUC		pTxD;
-	UINT32			BufBasePaLow;
-	PRTMP_TX_RING	pTxRing;
-	USHORT			hwHeaderLen;
-	UINT32			firstDMALen;
-
-	//
-	// Get Tx Ring Resource
-	//
-	pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
-	TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
-	pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
-	BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-
-	//
-	// Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
-	//
-	hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
-	firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;
-	NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
-
-
-	//
-	// Build Tx Descriptor
-	//
-	pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-
-	NdisZeroMemory(pTxD, TXD_SIZE);
-
-	if (fragNum == pTxBlk->TotalFragNum)
-	{
-		pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
-		pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-	}
-
-	pTxD->SDPtr0 = BufBasePaLow;
-	pTxD->SDLen0 = firstDMALen; // include padding
-	pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
-	pTxD->SDLen1 = pTxBlk->SrcBufLen;
-	pTxD->LastSec0 = 0;
-	pTxD->LastSec1 = 1;
-
-	RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-
-	RetTxIdx = TxIdx;
-	pTxBlk->Priv += pTxBlk->SrcBufLen;
-
-	//
-	// Update Tx index
-	//
-	INC_RING_INDEX(TxIdx, TX_RING_SIZE);
-	pTxRing->TxCpuIdx = TxIdx;
-
-	*FreeNumber -= 1;
-
-	return RetTxIdx;
-
-}
-
-/*
-	Must be run in Interrupt context
-	This function handle PCI specific TxDesc and cpu index update and kick the packet out.
- */
-int RtmpPCIMgmtKickOut(
-	IN RTMP_ADAPTER 	*pAd,
-	IN UCHAR 			QueIdx,
-	IN PNDIS_PACKET		pPacket,
-	IN PUCHAR			pSrcBufVA,
-	IN UINT 			SrcBufLen)
-{
-	PTXD_STRUC		pTxD;
-	ULONG			SwIdx = pAd->MgmtRing.TxCpuIdx;
-
-	pTxD  = (PTXD_STRUC) pAd->MgmtRing.Cell[SwIdx].AllocVa;
-	if (!pTxD)
-		return 0;
-
-	pAd->MgmtRing.Cell[SwIdx].pNdisPacket = pPacket;
-	pAd->MgmtRing.Cell[SwIdx].pNextNdisPacket = NULL;
-
-	RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_MGMT);
-	pTxD->LastSec0 = 1;
-	pTxD->LastSec1 = 1;
-	pTxD->DMADONE = 0;
-	pTxD->SDLen1 = 0;
-	pTxD->SDPtr0 = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);;
-	pTxD->SDLen0 = SrcBufLen;
-
-	pAd->RalinkCounters.KickTxCount++;
-	pAd->RalinkCounters.OneSecTxDoneCount++;
-
-	// Increase TX_CTX_IDX, but write to register later.
-	INC_RING_INDEX(pAd->MgmtRing.TxCpuIdx, MGMT_RING_SIZE);
-
-	RTMP_IO_WRITE32(pAd, TX_MGMTCTX_IDX,  pAd->MgmtRing.TxCpuIdx);
-
-	return 0;
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Check Rx descriptor, return NDIS_STATUS_FAILURE if any error dound
-
-	Arguments:
-		pRxD		Pointer to the Rx descriptor
-
-	Return Value:
-		NDIS_STATUS_SUCCESS 	No err
-		NDIS_STATUS_FAILURE 	Error
-
-	Note:
-
-	========================================================================
-*/
-NDIS_STATUS RTMPCheckRxError(
-	IN	PRTMP_ADAPTER		pAd,
-	IN	PHEADER_802_11		pHeader,
-	IN	PRXWI_STRUC 		pRxWI,
-	IN  PRT28XX_RXD_STRUC 	pRxD)
-{
-	PCIPHER_KEY pWpaKey;
-	INT dBm;
-
-	// Phy errors & CRC errors
-	if (/*(pRxD->PhyErr) ||*/ (pRxD->Crc))
-	{
-		// Check RSSI for Noise Hist statistic collection.
-		dBm = (INT) (pRxWI->RSSI0) - pAd->BbpRssiToDbmDelta;
-		if (dBm <= -87)
-			pAd->StaCfg.RPIDensity[0] += 1;
-		else if (dBm <= -82)
-			pAd->StaCfg.RPIDensity[1] += 1;
-		else if (dBm <= -77)
-			pAd->StaCfg.RPIDensity[2] += 1;
-		else if (dBm <= -72)
-			pAd->StaCfg.RPIDensity[3] += 1;
-		else if (dBm <= -67)
-			pAd->StaCfg.RPIDensity[4] += 1;
-		else if (dBm <= -62)
-			pAd->StaCfg.RPIDensity[5] += 1;
-		else if (dBm <= -57)
-			pAd->StaCfg.RPIDensity[6] += 1;
-		else if (dBm > -57)
-			pAd->StaCfg.RPIDensity[7] += 1;
-
-		return(NDIS_STATUS_FAILURE);
-	}
-
-	// Add Rx size to channel load counter, we should ignore error counts
-	pAd->StaCfg.CLBusyBytes += (pRxD->SDL0 + 14);
-
-	// Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics
-	if (pHeader != NULL)
-	{
-		if (pHeader->FC.ToDs)
-		{
-			return(NDIS_STATUS_FAILURE);
-		}
-	}
-
-	// Drop not U2M frames, cant's drop here because we will drop beacon in this case
-	// I am kind of doubting the U2M bit operation
-	// if (pRxD->U2M == 0)
-	//	return(NDIS_STATUS_FAILURE);
-
-	// drop decyption fail frame
-	if (pRxD->CipherErr)
-	{
-		if (pRxD->CipherErr == 2)
-			{DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: ICV ok but MICErr "));}
-		else if (pRxD->CipherErr == 1)
-			{DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: ICV Err "));}
-		else if (pRxD->CipherErr == 3)
-			DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: Key not valid "));
-
-        if (((pRxD->CipherErr & 1) == 1) && pAd->CommonCfg.bWirelessEvent && INFRA_ON(pAd))
-            RTMPSendWirelessEvent(pAd, IW_ICV_ERROR_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-		DBGPRINT_RAW(RT_DEBUG_TRACE,(" %d (len=%d, Mcast=%d, MyBss=%d, Wcid=%d, KeyId=%d)\n",
-			pRxD->CipherErr,
-			pRxD->SDL0,
-			pRxD->Mcast | pRxD->Bcast,
-			pRxD->MyBss,
-			pRxWI->WirelessCliID,
-			pRxWI->KeyIndex));
-
-		//
-		// MIC Error
-		//
-		if (pRxD->CipherErr == 2)
-		{
-			pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex];
-
-            if (pAd->StaCfg.WpaSupplicantUP)
-                WpaSendMicFailureToWpaSupplicant(pAd,
-                                   (pWpaKey->Type == PAIRWISEKEY) ? TRUE:FALSE);
-            else
-			    RTMPReportMicError(pAd, pWpaKey);
-
-            if (((pRxD->CipherErr & 2) == 2) && pAd->CommonCfg.bWirelessEvent && INFRA_ON(pAd))
-                RTMPSendWirelessEvent(pAd, IW_MIC_ERROR_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
-			DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error\n"));
-		}
-
-		if (pHeader == NULL)
-			return(NDIS_STATUS_SUCCESS);
-
-		return(NDIS_STATUS_FAILURE);
-	}
-
-	return(NDIS_STATUS_SUCCESS);
-}
-
-/*
-	==========================================================================
-	Description:
-		This routine sends command to firmware and turn our chip to power save mode.
-		Both RadioOff and .11 power save function needs to call this routine.
-	Input:
-		Level = GUIRADIO_OFF  : GUI Radio Off mode
-		Level = DOT11POWERSAVE  : 802.11 power save mode
-		Level = RTMP_HALT  : When Disable device.
-
-	==========================================================================
- */
-VOID RT28xxPciAsicRadioOff(
-	IN PRTMP_ADAPTER    pAd,
-	IN UCHAR            Level,
-	IN USHORT           TbttNumToNextWakeUp)
-{
-	WPDMA_GLO_CFG_STRUC	DmaCfg;
-	UCHAR		i, tempBBP_R3 = 0;
-	BOOLEAN		brc = FALSE, Cancelled;
-    UINT32		TbTTTime = 0;
-	UINT32		PsPollTime = 0, MACValue;
-    ULONG		BeaconPeriodTime;
-    UINT32		RxDmaIdx, RxCpuIdx;
-	DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> TxCpuIdx = %d, TxDmaIdx = %d. RxCpuIdx = %d, RxDmaIdx = %d.\n", pAd->TxRing[0].TxCpuIdx, pAd->TxRing[0].TxDmaIdx, pAd->RxRing.RxCpuIdx, pAd->RxRing.RxDmaIdx));
-
-    // Check Rx DMA busy status, if more than half is occupied, give up this radio off.
-	RTMP_IO_READ32(pAd, RX_DRX_IDX , &RxDmaIdx);
-	RTMP_IO_READ32(pAd, RX_CRX_IDX , &RxCpuIdx);
-	if ((RxDmaIdx > RxCpuIdx) && ((RxDmaIdx - RxCpuIdx) > RX_RING_SIZE/3))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> return1. RxDmaIdx = %d ,  RxCpuIdx = %d. \n", RxDmaIdx, RxCpuIdx));
-		return;
-	}
-	else if ((RxCpuIdx >= RxDmaIdx) && ((RxCpuIdx - RxDmaIdx) < RX_RING_SIZE/3))
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> return2.  RxCpuIdx = %d. RxDmaIdx = %d ,  \n", RxCpuIdx, RxDmaIdx));
-		return;
-	}
-
-    // Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops.
-	RTMP_SET_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
-
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
-	{
-	    RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,	&Cancelled);
-	    RTMPCancelTimer(&pAd->Mlme.PsPollTimer,	&Cancelled);
-
-	    if (Level == DOT11POWERSAVE)
-		{
-			RTMP_IO_READ32(pAd, TBTT_TIMER, &TbTTTime);
-			TbTTTime &= 0x1ffff;
-			// 00. check if need to do sleep in this DTIM period.   If next beacon will arrive within 30ms , ...doesn't necessarily sleep.
-			// TbTTTime uint = 64us, LEAD_TIME unit = 1024us, PsPollTime unit = 1ms
-	        if  (((64*TbTTTime) <((LEAD_TIME*1024) + 40000)) && (TbttNumToNextWakeUp == 0))
-			{
-				DBGPRINT(RT_DEBUG_TRACE, ("TbTTTime = 0x%x , give up this sleep. \n", TbTTTime));
-	            OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
-				RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
-				return;
-			}
-			else
-			{
-				PsPollTime = (64*TbTTTime- LEAD_TIME*1024)/1000;
-				PsPollTime -= 3;
-
-	            BeaconPeriodTime = pAd->CommonCfg.BeaconPeriod*102/100;
-				if (TbttNumToNextWakeUp > 0)
-					PsPollTime += ((TbttNumToNextWakeUp -1) * BeaconPeriodTime);
-
-	            pAd->Mlme.bPsPollTimerRunning = TRUE;
-				RTMPSetTimer(&pAd->Mlme.PsPollTimer, PsPollTime);
-			}
-		}
-	}
-
-    // 0. Disable Tx DMA.
-	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
-	DmaCfg.field.EnableTxDMA = 0;
-	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
-
-	// 1. Wait DMA not busy
-	i = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
-		if ((DmaCfg.field.TxDMABusy == 0) && (DmaCfg.field.RxDMABusy == 0))
-			break;
-		RTMPusecDelay(20);
-		i++;
-	}while(i < 50);
-
-	if (i >= 50)
-	{
-		DBGPRINT(RT_DEBUG_TRACE, ("DMA keeps busy.  return on RT28xxPciAsicRadioOff ()\n"));
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
-		DmaCfg.field.EnableTxDMA = 1;
-		RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
-		pAd->CheckDmaBusyCount++;
-		return;
-	}
-	else
-	{
-		pAd->CheckDmaBusyCount = 0;
-	}
-
-    RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
-
-    // Set to 1R.
-	if (pAd->Antenna.field.RxPath > 1)
-	{
-		tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7);
-		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3);
-	}
-
-	// In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
-	if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
-		&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-	{
-		// Must using 40MHz.
-		AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
-	}
-	else
-	{
-		// Must using 20MHz.
-		AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
-	}
-
-	if (Level != RTMP_HALT)
-	{
-		// Change Interrupt bitmask.
-		RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt);
-	}
-	else
-	{
-		NICDisableInterrupt(pAd);
-	}
-
-    RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx);
-	// Disable MAC Rx
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL , &MACValue);
-	MACValue &= 0xf7;
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL , MACValue);
-
-	//  2. Send Sleep command
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff);
-	RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff);
-	// send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power
-	AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x1);
-	//  2-1. Wait command success
-	// Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task.
-	brc = AsicCheckCommanOk(pAd, PowerSafeCID);
-
-    if (brc == FALSE)
-    {
-        // try again
-    	AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x01);   // send POWER-SAVE command to MCU. Timeout unit:40us.
-    	//RTMPusecDelay(200);
-    	brc = AsicCheckCommanOk(pAd, PowerSafeCID);
-    }
-
-	//  3. After 0x30 command is ok, send radio off command. lowbyte = 0 for power safe.
-	// If 0x30 command is not ok this time, we can ignore 0x35 command. It will make sure not cause firmware'r problem.
-	if ((Level == DOT11POWERSAVE) && (brc == TRUE))
-	{
-		AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 0, 0x00);	// lowbyte = 0 means to do power safe, NOT turn off radio.
-	 	//  3-1. Wait command success
-	 	AsicCheckCommanOk(pAd, PowerRadioOffCID);
-	}
-	else if (brc == TRUE)
-	{
-		AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 1, 0x00);	// lowbyte = 0 means to do power safe, NOT turn off radio.
-	 	//  3-1. Wait command success
-	 	AsicCheckCommanOk(pAd, PowerRadioOffCID);
-	}
-
-    // Wait DMA not busy
-	i = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
-		if ((DmaCfg.field.RxDMABusy == 0) && (DmaCfg.field.TxDMABusy == 0))
-			break;
-		RTMPusecDelay(20);
-		i++;
-	}while(i < 50);
-
-	if (i >= 50)
-	{
-		pAd->CheckDmaBusyCount++;
-		DBGPRINT(RT_DEBUG_TRACE, ("DMA Rx keeps busy.  on RT28xxPciAsicRadioOff ()\n"));
-	}
-	else
-	{
-		pAd->CheckDmaBusyCount = 0;
-	}
-
-	if (Level == DOT11POWERSAVE)
-	{
-		AUTO_WAKEUP_STRUC	AutoWakeupCfg;
-		//RTMPSetTimer(&pAd->Mlme.PsPollTimer, 90);
-
-		// we have decided to SLEEP, so at least do it for a BEACON period.
-		if (TbttNumToNextWakeUp == 0)
-			TbttNumToNextWakeUp = 1;
-
-		AutoWakeupCfg.word = 0;
-		RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-
-		// 1. Set auto wake up timer.
-		AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1;
-		AutoWakeupCfg.field.EnableAutoWakeup = 1;
-		AutoWakeupCfg.field.AutoLeadTime = LEAD_TIME;
-		RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-	}
-
-	//  4-1. If it's to disable our device. Need to restore PCI Configuration Space to its original value.
-	if (Level == RTMP_HALT)
-	{
-		if ((brc == TRUE) && (i < 50))
-			RTMPPCIeLinkCtrlSetting(pAd, 0);
-	}
-	//  4. Set PCI configuration Space Link Comtrol fields.  Only Radio Off needs to call this function
-	else
-	{
-		if ((brc == TRUE) && (i < 50))
-			RTMPPCIeLinkCtrlSetting(pAd, 3);
-	}
-
-	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
-}
-
-
-/*
-	==========================================================================
-	Description:
-		This routine sends command to firmware and turn our chip to wake up mode from power save mode.
-		Both RadioOn and .11 power save function needs to call this routine.
-	Input:
-		Level = GUIRADIO_OFF : call this function is from Radio Off to Radio On.  Need to restore PCI host value.
-		Level = other value : normal wake up function.
-
-	==========================================================================
- */
-BOOLEAN RT28xxPciAsicRadioOn(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR     Level)
-{
-    WPDMA_GLO_CFG_STRUC	DmaCfg;
-	BOOLEAN				Cancelled, brv = TRUE;
-    UINT32			    MACValue;
-
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
-	{
-	    pAd->Mlme.bPsPollTimerRunning = FALSE;
-		RTMPCancelTimer(&pAd->Mlme.PsPollTimer,	&Cancelled);
-		if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE)
-		|| (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("RT28xxPciAsicRadioOn ()\n"));
-			// 1. Set PCI Link Control in Configuration Space.
-			RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
-			RTMPusecDelay(6000);
-		}
-	}
-
-    pAd->bPCIclkOff = FALSE;
-	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x3a80);
-	// 2. Send wake up command.
-	AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
-
-	// 2-1. wait command ok.
-	brv = AsicCheckCommanOk(pAd, PowerWakeCID);
-    if (brv)
-    {
-    	NICEnableInterrupt(pAd);
-
-    	// 3. Enable Tx DMA.
-    	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
-    	DmaCfg.field.EnableTxDMA = 1;
-        DmaCfg.field.EnableRxDMA = 1;
-    	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
-
-        // Eable MAC Rx
-    	RTMP_IO_READ32(pAd, MAC_SYS_CTRL , &MACValue);
-    	MACValue |= 0x8;
-    	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL , MACValue);
-
-    	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
-    	if (Level == GUI_IDLE_POWER_SAVE)
-    	{
-    		// In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
-    		if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
-    			&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-    		{
-    			// Must using 40MHz.
-    			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-    			AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-    		}
-    		else
-    		{
-    			// Must using 20MHz.
-    			AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-    			AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-    		}
-    	}
-        return TRUE;
-    }
-    else
-        return FALSE;
-}
-
-VOID RT28xxPciStaAsicForceWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR    	 Level)
-{
-    AUTO_WAKEUP_STRUC	AutoWakeupCfg;
-
-    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW))
-    {
-        DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n"));
-        return;
-    }
-
-    OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
-	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
-
-    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
-    {
-        // Support PCIe Advance Power Save
-    	if (((Level == FROM_TX) && (pAd->Mlme.bPsPollTimerRunning == TRUE)) ||
-			(Level == RTMP_HALT))
-    	{
-            pAd->Mlme.bPsPollTimerRunning = FALSE;
-    		RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
-    		RTMPusecDelay(5000);
-            DBGPRINT(RT_DEBUG_TRACE, ("=======AsicForceWakeup===bFromTx\n"));
-    	}
-
-		AutoWakeupCfg.word = 0;
-		RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-
-		// If this is called from Halt. ALWAYS force wakeup!
-		if (Level == RTMP_HALT)
-		{
-			RT28xxPciAsicRadioOn(pAd, RTMP_HALT);
-		}
-		else
-		{
-			if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE))
-			{
-				// In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
-				if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
-					&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-				{
-					// Must using 40MHz.
-					AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-				}
-				else
-				{
-					// Must using 20MHz.
-					AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-					AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-				}
-			}
-		}
-    }
-    else
-    {
-        // PCI, 2860-PCIe
-        AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
-		AutoWakeupCfg.word = 0;
-		RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-    }
-
-    OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
-    OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
-    DBGPRINT(RT_DEBUG_TRACE, ("<=======RT28xxPciStaAsicForceWakeup\n"));
-}
-
-VOID RT28xxPciStaAsicSleepThenAutoWakeup(
-	IN PRTMP_ADAPTER pAd,
-	IN USHORT TbttNumToNextWakeUp)
-{
-    if (pAd->StaCfg.bRadio == FALSE)
-	{
-		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
-		return;
-	}
-    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
-    {
-    	ULONG	Now = 0;
-        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW))
-        {
-            DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n"));
-            OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
-            return;
-        }
-
-		NdisGetSystemUpTime(&Now);
-		// If last send NULL fram time is too close to this receiving beacon (within 8ms), don't go to sleep for this DTM.
-		// Because Some AP can't queuing outgoing frames immediately.
-		if (((pAd->Mlme.LastSendNULLpsmTime + 8) >= Now) && (pAd->Mlme.LastSendNULLpsmTime <= Now))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("Now = %lu, LastSendNULLpsmTime=%lu :  RxCountSinceLastNULL = %lu. \n", Now, pAd->Mlme.LastSendNULLpsmTime, pAd->RalinkCounters.RxCountSinceLastNULL));
-			return;
-		}
-		else if ((pAd->RalinkCounters.RxCountSinceLastNULL > 0) && ((pAd->Mlme.LastSendNULLpsmTime + pAd->CommonCfg.BeaconPeriod) >= Now))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("Now = %lu, LastSendNULLpsmTime=%lu: RxCountSinceLastNULL = %lu > 0 \n", Now, pAd->Mlme.LastSendNULLpsmTime,  pAd->RalinkCounters.RxCountSinceLastNULL));
-			return;
-		}
-
-        RT28xxPciAsicRadioOff(pAd, DOT11POWERSAVE, TbttNumToNextWakeUp);
-    }
-    else
-    {
-        AUTO_WAKEUP_STRUC	AutoWakeupCfg;
-        // we have decided to SLEEP, so at least do it for a BEACON period.
-        if (TbttNumToNextWakeUp == 0)
-            TbttNumToNextWakeUp = 1;
-
-        AutoWakeupCfg.word = 0;
-        RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-        AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1;
-        AutoWakeupCfg.field.EnableAutoWakeup = 1;
-        AutoWakeupCfg.field.AutoLeadTime = 5;
-        RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-        AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x00);   // send POWER-SAVE command to MCU. Timeout 40us.
-        DBGPRINT(RT_DEBUG_TRACE, ("<-- %s, TbttNumToNextWakeUp=%d \n", __func__, TbttNumToNextWakeUp));
-    }
-    OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
-}
-
-VOID PsPollWakeExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-	unsigned long flags;
-
-    DBGPRINT(RT_DEBUG_TRACE,("-->PsPollWakeExec \n"));
-	RTMP_INT_LOCK(&pAd->irq_lock, flags);
-    if (pAd->Mlme.bPsPollTimerRunning)
-    {
-	    RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
-    }
-    pAd->Mlme.bPsPollTimerRunning = FALSE;
-	RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
-}
-
-VOID  RadioOnExec(
-	IN PVOID SystemSpecific1,
-	IN PVOID FunctionContext,
-	IN PVOID SystemSpecific2,
-	IN PVOID SystemSpecific3)
-{
-	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
-	WPDMA_GLO_CFG_STRUC	DmaCfg;
-	BOOLEAN				Cancelled;
-
-	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("-->RadioOnExec() return on fOP_STATUS_DOZE == TRUE; \n"));
-		RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
-		return;
-	}
-
-	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("-->RadioOnExec() return on SCAN_IN_PROGRESS; \n"));
-		RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
-		return;
-	}
-    pAd->Mlme.bPsPollTimerRunning = FALSE;
-	RTMPCancelTimer(&pAd->Mlme.PsPollTimer,	&Cancelled);
-	if (pAd->StaCfg.bRadio == TRUE)
-	{
-		pAd->bPCIclkOff = FALSE;
-        RTMPRingCleanUp(pAd, QID_AC_BK);
-		RTMPRingCleanUp(pAd, QID_AC_BE);
-		RTMPRingCleanUp(pAd, QID_AC_VI);
-		RTMPRingCleanUp(pAd, QID_AC_VO);
-		RTMPRingCleanUp(pAd, QID_HCCA);
-		RTMPRingCleanUp(pAd, QID_MGMT);
-		RTMPRingCleanUp(pAd, QID_RX);
-
-		// 2. Send wake up command.
-		AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
-		// 2-1. wait command ok.
-		AsicCheckCommanOk(pAd, PowerWakeCID);
-
-		// When PCI clock is off, don't want to service interrupt. So when back to clock on, enable interrupt.
-		NICEnableInterrupt(pAd);
-
-		// 3. Enable Tx DMA.
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
-		DmaCfg.field.EnableTxDMA = 1;
-		RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
-
-		// In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
-		if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
-			&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
-		{
-			// Must using 40MHz.
-			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
-			AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
-		}
-		else
-		{
-			// Must using 20MHz.
-			AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
-			AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-		}
-
-		// Clear Radio off flag
-		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-
-		// Set LED
-		RTMPSetLED(pAd, LED_RADIO_ON);
-
-        if (pAd->StaCfg.Psm == PWR_ACTIVE)
-        {
-    		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
-        }
-	}
-	else
-	{
-		RT28xxPciAsicRadioOff(pAd, GUIRADIO_OFF, 0);
-	}
-}
-
-VOID RT28xxPciMlmeRadioOn(
-	IN PRTMP_ADAPTER pAd)
-{
-    if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
-   		return;
-
-    DBGPRINT(RT_DEBUG_TRACE,("%s===>\n", __func__));
-
-    if ((pAd->OpMode == OPMODE_AP) ||
-        ((pAd->OpMode == OPMODE_STA) && (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))))
-    {
-    	NICResetFromError(pAd);
-
-    	/*
-    	RTMPRingCleanUp(pAd, QID_AC_BK);
-    	RTMPRingCleanUp(pAd, QID_AC_BE);
-    	RTMPRingCleanUp(pAd, QID_AC_VI);
-    	RTMPRingCleanUp(pAd, QID_AC_VO);
-    	RTMPRingCleanUp(pAd, QID_HCCA);
-    	RTMPRingCleanUp(pAd, QID_MGMT);
-    	RTMPRingCleanUp(pAd, QID_RX);
-		*/
-
-    	// Enable Tx/Rx
-    	RTMPEnableRxTx(pAd);
-
-    	// Clear Radio off flag
-    	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-
-	    // Set LED
-	    RTMPSetLED(pAd, LED_RADIO_ON);
-    }
-
-    if ((pAd->OpMode == OPMODE_STA) &&
-        (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)))
-    {
-        BOOLEAN		Cancelled;
-
-    	RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
-
-        pAd->Mlme.bPsPollTimerRunning = FALSE;
-    	RTMPCancelTimer(&pAd->Mlme.PsPollTimer,	&Cancelled);
-    	RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,	&Cancelled);
-    	RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
-    }
-}
-
-VOID RT28xxPciMlmeRadioOFF(
-	IN PRTMP_ADAPTER pAd)
-{
-    WPDMA_GLO_CFG_STRUC	GloCfg;
-	UINT32	i;
-
-	if (pAd->StaCfg.bRadio == TRUE)
-	{
-		DBGPRINT(RT_DEBUG_TRACE,("-->MlmeRadioOff() return on bRadio == TRUE; \n"));
-		return;
-	}
-
-    if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
-    	return;
-
-    DBGPRINT(RT_DEBUG_TRACE,("%s===>\n", __func__));
-
-	// Set LED
-	RTMPSetLED(pAd, LED_RADIO_OFF);
-
-    {
-    	BOOLEAN		Cancelled;
-
-    	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-    	{
-			RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
-			RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-    	}
-
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
-        {
-            BOOLEAN Cancelled;
-
-			// Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF).
-			if ((pAd->OpMode == OPMODE_STA) && 
-			     (IDLE_ON(pAd)) && 
-			     (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
-			{
-				RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
-			}
-
-            pAd->Mlme.bPsPollTimerRunning = FALSE;
-            RTMPCancelTimer(&pAd->Mlme.PsPollTimer,	&Cancelled);
-	        RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,	&Cancelled);
-        }
-
-        // Link down first if any association exists
-        if (INFRA_ON(pAd) || ADHOC_ON(pAd))
-            LinkDown(pAd, FALSE);
-        RTMPusecDelay(10000);
-        //==========================================
-        // Clean up old bss table
-        BssTableInit(&pAd->ScanTab);
-
-		RTMPRingCleanUp(pAd, QID_AC_BK);
-    	RTMPRingCleanUp(pAd, QID_AC_BE);
-    	RTMPRingCleanUp(pAd, QID_AC_VI);
-    	RTMPRingCleanUp(pAd, QID_AC_VO);
-    	RTMPRingCleanUp(pAd, QID_HCCA);
-    	RTMPRingCleanUp(pAd, QID_MGMT);
-    	RTMPRingCleanUp(pAd, QID_RX);
-
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
-		{
-			RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 500);
-			return;
-		}
-    }
-
-	// Set Radio off flag
-	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-
-	// Disable Tx/Rx DMA
-	RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);	   // disable DMA
-	GloCfg.field.EnableTxDMA = 0;
-	GloCfg.field.EnableRxDMA = 0;
-	RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word);	   // abort all TX rings
-
-
-	// MAC_SYS_CTRL => value = 0x0 => 40mA
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0);
-
-	// PWR_PIN_CFG => value = 0x0 => 40mA
-	RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0);
-
-	// TX_PIN_CFG => value = 0x0 => 20mA
-	RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0);
-
-	if (pAd->CommonCfg.BBPCurrentBW == BW_40)
-	{
-		// Must using 40MHz.
-		AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
-	}
-	else
-	{
-		// Must using 20MHz.
-		AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
-	}
-
-	// Waiting for DMA idle
-	i = 0;
-	do
-	{
-		RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
-		if ((GloCfg.field.TxDMABusy == 0) && (GloCfg.field.RxDMABusy == 0))
-			break;
-
-		RTMPusecDelay(1000);
-	}while (i++ < 100);
-}
-- 
1.6.5.5

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel

[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux