[PATCH 637/641] Staging: meilhaus: remove the drivers

[Greg Kroah-Hartman <gregkh@xxxxxxx>]

The comedi drivers should be used instead, no need to have
these in here as well.

Cc: David Kiliani <mail@xxxxxxxxxxxxxxx>
Cc: Meilhaus Support <support@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/staging/Kconfig                       |    2 -
 drivers/staging/Makefile                      |    1 -
 drivers/staging/meilhaus/Kconfig              |  128 -
 drivers/staging/meilhaus/Makefile             |   43 -
 drivers/staging/meilhaus/TODO                 |   10 -
 drivers/staging/meilhaus/me0600_device.c      |  213 -
 drivers/staging/meilhaus/me0600_device.h      |   97 -
 drivers/staging/meilhaus/me0600_dio.c         |  415 --
 drivers/staging/meilhaus/me0600_dio.h         |   68 -
 drivers/staging/meilhaus/me0600_dio_reg.h     |   41 -
 drivers/staging/meilhaus/me0600_ext_irq.c     |  469 --
 drivers/staging/meilhaus/me0600_ext_irq.h     |   58 -
 drivers/staging/meilhaus/me0600_ext_irq_reg.h |   18 -
 drivers/staging/meilhaus/me0600_optoi.c       |  243 -
 drivers/staging/meilhaus/me0600_optoi.h       |   58 -
 drivers/staging/meilhaus/me0600_optoi_reg.h   |   35 -
 drivers/staging/meilhaus/me0600_relay.c       |  359 --
 drivers/staging/meilhaus/me0600_relay.h       |   63 -
 drivers/staging/meilhaus/me0600_relay_reg.h   |   36 -
 drivers/staging/meilhaus/me0600_ttli.c        |  238 -
 drivers/staging/meilhaus/me0600_ttli.h        |   58 -
 drivers/staging/meilhaus/me0600_ttli_reg.h    |   35 -
 drivers/staging/meilhaus/me0900_device.c      |  178 -
 drivers/staging/meilhaus/me0900_device.h      |   92 -
 drivers/staging/meilhaus/me0900_di.c          |  245 -
 drivers/staging/meilhaus/me0900_di.h          |   65 -
 drivers/staging/meilhaus/me0900_do.c          |  314 --
 drivers/staging/meilhaus/me0900_do.h          |   68 -
 drivers/staging/meilhaus/me0900_reg.h         |   40 -
 drivers/staging/meilhaus/me1000_device.c      |  206 -
 drivers/staging/meilhaus/me1000_device.h      |   59 -
 drivers/staging/meilhaus/me1000_dio.c         |  438 --
 drivers/staging/meilhaus/me1000_dio.h         |   71 -
 drivers/staging/meilhaus/me1000_dio_reg.h     |   50 -
 drivers/staging/meilhaus/me1400_device.c      |  253 --
 drivers/staging/meilhaus/me1400_device.h      |  108 -
 drivers/staging/meilhaus/me1400_ext_irq.c     |  507 ---
 drivers/staging/meilhaus/me1400_ext_irq.h     |   62 -
 drivers/staging/meilhaus/me1400_ext_irq_reg.h |   56 -
 drivers/staging/meilhaus/me1600_ao.c          | 1017 -----
 drivers/staging/meilhaus/me1600_ao.h          |  128 -
 drivers/staging/meilhaus/me1600_ao_reg.h      |   66 -
 drivers/staging/meilhaus/me1600_device.c      |  259 --
 drivers/staging/meilhaus/me1600_device.h      |  101 -
 drivers/staging/meilhaus/me4600_ai.c          | 3405 --------------
 drivers/staging/meilhaus/me4600_ai.h          |  175 -
 drivers/staging/meilhaus/me4600_ai_reg.h      |  107 -
 drivers/staging/meilhaus/me4600_ao.c          | 5974 -------------------------
 drivers/staging/meilhaus/me4600_ao.h          |  259 --
 drivers/staging/meilhaus/me4600_ao_reg.h      |  113 -
 drivers/staging/meilhaus/me4600_device.c      |  371 --
 drivers/staging/meilhaus/me4600_device.h      |  151 -
 drivers/staging/meilhaus/me4600_di.c          |  256 --
 drivers/staging/meilhaus/me4600_di.h          |   64 -
 drivers/staging/meilhaus/me4600_dio.c         |  510 ---
 drivers/staging/meilhaus/me4600_dio.h         |   69 -
 drivers/staging/meilhaus/me4600_dio_reg.h     |   63 -
 drivers/staging/meilhaus/me4600_do.c          |  433 --
 drivers/staging/meilhaus/me4600_do.h          |   65 -
 drivers/staging/meilhaus/me4600_ext_irq.c     |  457 --
 drivers/staging/meilhaus/me4600_ext_irq.h     |   78 -
 drivers/staging/meilhaus/me4600_ext_irq_reg.h |   41 -
 drivers/staging/meilhaus/me4600_reg.h         |   46 -
 drivers/staging/meilhaus/me6000_ao.c          | 3709 ---------------
 drivers/staging/meilhaus/me6000_ao.h          |  195 -
 drivers/staging/meilhaus/me6000_ao_reg.h      |  177 -
 drivers/staging/meilhaus/me6000_device.c      |  209 -
 drivers/staging/meilhaus/me6000_device.h      |  149 -
 drivers/staging/meilhaus/me6000_dio.c         |  415 --
 drivers/staging/meilhaus/me6000_dio.h         |   68 -
 drivers/staging/meilhaus/me6000_dio_reg.h     |   43 -
 drivers/staging/meilhaus/me6000_reg.h         |   35 -
 drivers/staging/meilhaus/me8100_device.c      |  185 -
 drivers/staging/meilhaus/me8100_device.h      |   97 -
 drivers/staging/meilhaus/me8100_di.c          |  684 ---
 drivers/staging/meilhaus/me8100_di.h          |   89 -
 drivers/staging/meilhaus/me8100_di_reg.h      |   47 -
 drivers/staging/meilhaus/me8100_do.c          |  391 --
 drivers/staging/meilhaus/me8100_do.h          |   70 -
 drivers/staging/meilhaus/me8100_do_reg.h      |   36 -
 drivers/staging/meilhaus/me8100_reg.h         |   41 -
 drivers/staging/meilhaus/me8200_device.c      |  192 -
 drivers/staging/meilhaus/me8200_device.h      |   97 -
 drivers/staging/meilhaus/me8200_di.c          |  832 ----
 drivers/staging/meilhaus/me8200_di.h          |   92 -
 drivers/staging/meilhaus/me8200_di_reg.h      |   75 -
 drivers/staging/meilhaus/me8200_dio.c         |  418 --
 drivers/staging/meilhaus/me8200_dio.h         |   68 -
 drivers/staging/meilhaus/me8200_dio_reg.h     |   43 -
 drivers/staging/meilhaus/me8200_do.c          |  591 ---
 drivers/staging/meilhaus/me8200_do.h          |   75 -
 drivers/staging/meilhaus/me8200_do_reg.h      |   40 -
 drivers/staging/meilhaus/me8200_reg.h         |   46 -
 drivers/staging/meilhaus/me8254.c             | 1176 -----
 drivers/staging/meilhaus/me8254.h             |   80 -
 drivers/staging/meilhaus/me8254_reg.h         |  172 -
 drivers/staging/meilhaus/me8255.c             |  462 --
 drivers/staging/meilhaus/me8255.h             |   59 -
 drivers/staging/meilhaus/me8255_reg.h         |   50 -
 drivers/staging/meilhaus/mecirc_buf.h         |  131 -
 drivers/staging/meilhaus/mecommon.h           |   26 -
 drivers/staging/meilhaus/medebug.h            |  125 -
 drivers/staging/meilhaus/medefines.h          |  449 --
 drivers/staging/meilhaus/medevice.c           | 1740 -------
 drivers/staging/meilhaus/medevice.h           |  304 --
 drivers/staging/meilhaus/medlist.c            |  127 -
 drivers/staging/meilhaus/medlist.h            |   91 -
 drivers/staging/meilhaus/medlock.c            |  195 -
 drivers/staging/meilhaus/medlock.h            |   76 -
 drivers/staging/meilhaus/medriver.h           |  350 --
 drivers/staging/meilhaus/medummy.c            | 1264 ------
 drivers/staging/meilhaus/medummy.h            |   40 -
 drivers/staging/meilhaus/meerror.h            |  100 -
 drivers/staging/meilhaus/mefirmware.c         |  137 -
 drivers/staging/meilhaus/mefirmware.h         |   57 -
 drivers/staging/meilhaus/meids.h              |   31 -
 drivers/staging/meilhaus/meinternal.h         |  363 --
 drivers/staging/meilhaus/meioctl.h            |  515 ---
 drivers/staging/meilhaus/memain.c             | 2084 ---------
 drivers/staging/meilhaus/memain.h             |  266 --
 drivers/staging/meilhaus/meplx_reg.h          |   53 -
 drivers/staging/meilhaus/meslist.c            |  173 -
 drivers/staging/meilhaus/meslist.h            |  108 -
 drivers/staging/meilhaus/meslock.c            |  136 -
 drivers/staging/meilhaus/meslock.h            |   73 -
 drivers/staging/meilhaus/mesubdevice.c        |  317 --
 drivers/staging/meilhaus/mesubdevice.h        |  197 -
 drivers/staging/meilhaus/metempl_device.c     |  135 -
 drivers/staging/meilhaus/metempl_device.h     |   92 -
 drivers/staging/meilhaus/metempl_sub.c        |  149 -
 drivers/staging/meilhaus/metempl_sub.h        |   64 -
 drivers/staging/meilhaus/metempl_sub_reg.h    |   35 -
 drivers/staging/meilhaus/metypes.h            |   95 -
 133 files changed, 0 insertions(+), 41014 deletions(-)
 delete mode 100644 drivers/staging/meilhaus/Kconfig
 delete mode 100644 drivers/staging/meilhaus/Makefile
 delete mode 100644 drivers/staging/meilhaus/TODO
 delete mode 100644 drivers/staging/meilhaus/me0600_device.c
 delete mode 100644 drivers/staging/meilhaus/me0600_device.h
 delete mode 100644 drivers/staging/meilhaus/me0600_dio.c
 delete mode 100644 drivers/staging/meilhaus/me0600_dio.h
 delete mode 100644 drivers/staging/meilhaus/me0600_dio_reg.h
 delete mode 100644 drivers/staging/meilhaus/me0600_ext_irq.c
 delete mode 100644 drivers/staging/meilhaus/me0600_ext_irq.h
 delete mode 100644 drivers/staging/meilhaus/me0600_ext_irq_reg.h
 delete mode 100644 drivers/staging/meilhaus/me0600_optoi.c
 delete mode 100644 drivers/staging/meilhaus/me0600_optoi.h
 delete mode 100644 drivers/staging/meilhaus/me0600_optoi_reg.h
 delete mode 100644 drivers/staging/meilhaus/me0600_relay.c
 delete mode 100644 drivers/staging/meilhaus/me0600_relay.h
 delete mode 100644 drivers/staging/meilhaus/me0600_relay_reg.h
 delete mode 100644 drivers/staging/meilhaus/me0600_ttli.c
 delete mode 100644 drivers/staging/meilhaus/me0600_ttli.h
 delete mode 100644 drivers/staging/meilhaus/me0600_ttli_reg.h
 delete mode 100644 drivers/staging/meilhaus/me0900_device.c
 delete mode 100644 drivers/staging/meilhaus/me0900_device.h
 delete mode 100644 drivers/staging/meilhaus/me0900_di.c
 delete mode 100644 drivers/staging/meilhaus/me0900_di.h
 delete mode 100644 drivers/staging/meilhaus/me0900_do.c
 delete mode 100644 drivers/staging/meilhaus/me0900_do.h
 delete mode 100644 drivers/staging/meilhaus/me0900_reg.h
 delete mode 100644 drivers/staging/meilhaus/me1000_device.c
 delete mode 100644 drivers/staging/meilhaus/me1000_device.h
 delete mode 100644 drivers/staging/meilhaus/me1000_dio.c
 delete mode 100644 drivers/staging/meilhaus/me1000_dio.h
 delete mode 100644 drivers/staging/meilhaus/me1000_dio_reg.h
 delete mode 100644 drivers/staging/meilhaus/me1400_device.c
 delete mode 100644 drivers/staging/meilhaus/me1400_device.h
 delete mode 100644 drivers/staging/meilhaus/me1400_ext_irq.c
 delete mode 100644 drivers/staging/meilhaus/me1400_ext_irq.h
 delete mode 100644 drivers/staging/meilhaus/me1400_ext_irq_reg.h
 delete mode 100644 drivers/staging/meilhaus/me1600_ao.c
 delete mode 100644 drivers/staging/meilhaus/me1600_ao.h
 delete mode 100644 drivers/staging/meilhaus/me1600_ao_reg.h
 delete mode 100644 drivers/staging/meilhaus/me1600_device.c
 delete mode 100644 drivers/staging/meilhaus/me1600_device.h
 delete mode 100644 drivers/staging/meilhaus/me4600_ai.c
 delete mode 100644 drivers/staging/meilhaus/me4600_ai.h
 delete mode 100644 drivers/staging/meilhaus/me4600_ai_reg.h
 delete mode 100644 drivers/staging/meilhaus/me4600_ao.c
 delete mode 100644 drivers/staging/meilhaus/me4600_ao.h
 delete mode 100644 drivers/staging/meilhaus/me4600_ao_reg.h
 delete mode 100644 drivers/staging/meilhaus/me4600_device.c
 delete mode 100644 drivers/staging/meilhaus/me4600_device.h
 delete mode 100644 drivers/staging/meilhaus/me4600_di.c
 delete mode 100644 drivers/staging/meilhaus/me4600_di.h
 delete mode 100644 drivers/staging/meilhaus/me4600_dio.c
 delete mode 100644 drivers/staging/meilhaus/me4600_dio.h
 delete mode 100644 drivers/staging/meilhaus/me4600_dio_reg.h
 delete mode 100644 drivers/staging/meilhaus/me4600_do.c
 delete mode 100644 drivers/staging/meilhaus/me4600_do.h
 delete mode 100644 drivers/staging/meilhaus/me4600_ext_irq.c
 delete mode 100644 drivers/staging/meilhaus/me4600_ext_irq.h
 delete mode 100644 drivers/staging/meilhaus/me4600_ext_irq_reg.h
 delete mode 100644 drivers/staging/meilhaus/me4600_reg.h
 delete mode 100644 drivers/staging/meilhaus/me6000_ao.c
 delete mode 100644 drivers/staging/meilhaus/me6000_ao.h
 delete mode 100644 drivers/staging/meilhaus/me6000_ao_reg.h
 delete mode 100644 drivers/staging/meilhaus/me6000_device.c
 delete mode 100644 drivers/staging/meilhaus/me6000_device.h
 delete mode 100644 drivers/staging/meilhaus/me6000_dio.c
 delete mode 100644 drivers/staging/meilhaus/me6000_dio.h
 delete mode 100644 drivers/staging/meilhaus/me6000_dio_reg.h
 delete mode 100644 drivers/staging/meilhaus/me6000_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8100_device.c
 delete mode 100644 drivers/staging/meilhaus/me8100_device.h
 delete mode 100644 drivers/staging/meilhaus/me8100_di.c
 delete mode 100644 drivers/staging/meilhaus/me8100_di.h
 delete mode 100644 drivers/staging/meilhaus/me8100_di_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8100_do.c
 delete mode 100644 drivers/staging/meilhaus/me8100_do.h
 delete mode 100644 drivers/staging/meilhaus/me8100_do_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8100_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8200_device.c
 delete mode 100644 drivers/staging/meilhaus/me8200_device.h
 delete mode 100644 drivers/staging/meilhaus/me8200_di.c
 delete mode 100644 drivers/staging/meilhaus/me8200_di.h
 delete mode 100644 drivers/staging/meilhaus/me8200_di_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8200_dio.c
 delete mode 100644 drivers/staging/meilhaus/me8200_dio.h
 delete mode 100644 drivers/staging/meilhaus/me8200_dio_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8200_do.c
 delete mode 100644 drivers/staging/meilhaus/me8200_do.h
 delete mode 100644 drivers/staging/meilhaus/me8200_do_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8200_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8254.c
 delete mode 100644 drivers/staging/meilhaus/me8254.h
 delete mode 100644 drivers/staging/meilhaus/me8254_reg.h
 delete mode 100644 drivers/staging/meilhaus/me8255.c
 delete mode 100644 drivers/staging/meilhaus/me8255.h
 delete mode 100644 drivers/staging/meilhaus/me8255_reg.h
 delete mode 100644 drivers/staging/meilhaus/mecirc_buf.h
 delete mode 100644 drivers/staging/meilhaus/mecommon.h
 delete mode 100644 drivers/staging/meilhaus/medebug.h
 delete mode 100644 drivers/staging/meilhaus/medefines.h
 delete mode 100644 drivers/staging/meilhaus/medevice.c
 delete mode 100644 drivers/staging/meilhaus/medevice.h
 delete mode 100644 drivers/staging/meilhaus/medlist.c
 delete mode 100644 drivers/staging/meilhaus/medlist.h
 delete mode 100644 drivers/staging/meilhaus/medlock.c
 delete mode 100644 drivers/staging/meilhaus/medlock.h
 delete mode 100644 drivers/staging/meilhaus/medriver.h
 delete mode 100644 drivers/staging/meilhaus/medummy.c
 delete mode 100644 drivers/staging/meilhaus/medummy.h
 delete mode 100644 drivers/staging/meilhaus/meerror.h
 delete mode 100644 drivers/staging/meilhaus/mefirmware.c
 delete mode 100644 drivers/staging/meilhaus/mefirmware.h
 delete mode 100644 drivers/staging/meilhaus/meids.h
 delete mode 100644 drivers/staging/meilhaus/meinternal.h
 delete mode 100644 drivers/staging/meilhaus/meioctl.h
 delete mode 100644 drivers/staging/meilhaus/memain.c
 delete mode 100644 drivers/staging/meilhaus/memain.h
 delete mode 100644 drivers/staging/meilhaus/meplx_reg.h
 delete mode 100644 drivers/staging/meilhaus/meslist.c
 delete mode 100644 drivers/staging/meilhaus/meslist.h
 delete mode 100644 drivers/staging/meilhaus/meslock.c
 delete mode 100644 drivers/staging/meilhaus/meslock.h
 delete mode 100644 drivers/staging/meilhaus/mesubdevice.c
 delete mode 100644 drivers/staging/meilhaus/mesubdevice.h
 delete mode 100644 drivers/staging/meilhaus/metempl_device.c
 delete mode 100644 drivers/staging/meilhaus/metempl_device.h
 delete mode 100644 drivers/staging/meilhaus/metempl_sub.c
 delete mode 100644 drivers/staging/meilhaus/metempl_sub.h
 delete mode 100644 drivers/staging/meilhaus/metempl_sub_reg.h
 delete mode 100644 drivers/staging/meilhaus/metypes.h

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d76f6b3..982e944 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -47,8 +47,6 @@ source "drivers/staging/slicoss/Kconfig"
 
 source "drivers/staging/sxg/Kconfig"
 
-source "drivers/staging/meilhaus/Kconfig"
-
 source "drivers/staging/go7007/Kconfig"
 
 source "drivers/staging/usbip/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 01bf228..4eabb44 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_STAGING)		+= staging.o
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_SXG)		+= sxg/
-obj-$(CONFIG_MEILHAUS)		+= meilhaus/
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
 obj-$(CONFIG_USB_IP_COMMON)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig
deleted file mode 100644
index 923af22..0000000
--- a/drivers/staging/meilhaus/Kconfig
+++ /dev/null
@@ -1,128 +0,0 @@
-#
-# Meilhaus configuration
-#
-
-menuconfig MEILHAUS
-	tristate "Meilhaus support"
-	depends on m
-	---help---
-	  If you have a Meilhaus card, say Y (or M) here.
-
-	  You need both this driver, and the driver for the particular
-	  data collection card.
-
-	  To compile this driver as a module, choose M here. The module will
-	  be called memain.
-
-if MEILHAUS
-
-config ME0600
-	tristate "Meilhaus ME-600 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-600 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me0600.
-
-config ME0900
-	tristate "Meilhaus ME-900 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-900 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me0900.
-
-config ME1000
-	tristate "Meilhaus ME-1000 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-1000 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me1000.
-
-config ME1400
-	tristate "Meilhaus ME-1400 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-1400 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me1400.
-
-config ME1600
-	tristate "Meilhaus ME-1600 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-1600 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me1600.
-
-config ME4600
-	tristate "Meilhaus ME-4600 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-4600 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me4600.
-
-config ME6000
-	tristate "Meilhaus ME-6000 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-6000 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me6000.
-
-config ME8100
-	tristate "Meilhaus ME-8100 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-8100 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me8100.
-
-config ME8200
-	tristate "Meilhaus ME-8200 support"
-	default n
-	depends on PCI && m
-	help
-	  This driver supports the Meilhaus ME-8200 family of boards
-	  that do data collection and multipurpose I/O.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called me8200.
-
-config MEDUMMY
-	tristate "Meilhaus dummy driver"
-	default n
-	depends on PCI && m
-	help
-	  This provides a dummy driver for the Meilhaus driver package
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called medummy.
-
-endif # MEILHAUS
diff --git a/drivers/staging/meilhaus/Makefile b/drivers/staging/meilhaus/Makefile
deleted file mode 100644
index 5ab2c1c..0000000
--- a/drivers/staging/meilhaus/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# Makefile for Meilhaus linux driver system
-#
-
-obj-$(CONFIG_MEILHAUS) += memain.o
-obj-$(CONFIG_ME1600) += me1600.o
-obj-$(CONFIG_ME1000) += me1000.o
-obj-$(CONFIG_ME1400) += me1400.o
-obj-$(CONFIG_ME4600) += me4600.o
-obj-$(CONFIG_ME6000) += me6000.o
-obj-$(CONFIG_ME0600) += me0600.o
-obj-$(CONFIG_ME8100) += me8100.o
-obj-$(CONFIG_ME8200) += me8200.o
-obj-$(CONFIG_ME0900) += me0900.o
-obj-$(CONFIG_MEDUMMY) += medummy.o
-
-
-me1600-objs := medevice.o medlist.o medlock.o me1600_device.o
-me1600-objs += mesubdevice.o meslist.o meslock.o me1600_ao.o
-
-me1000-objs := medevice.o medlist.o medlock.o me1000_device.o
-me1000-objs += mesubdevice.o meslist.o meslock.o me1000_dio.o
-
-me1400-objs := medevice.o medlist.o medlock.o me1400_device.o
-me1400-objs += mesubdevice.o meslist.o meslock.o me8254.o me8255.o me1400_ext_irq.o
-
-me4600-objs := medevice.o medlist.o medlock.o mefirmware.o me4600_device.o
-me4600-objs += mesubdevice.o meslist.o meslock.o me4600_do.o me4600_di.o me4600_dio.o me8254.o me4600_ai.o me4600_ao.o me4600_ext_irq.o
-
-me6000-objs := medevice.o medlist.o medlock.o mefirmware.o me6000_device.o
-me6000-objs += mesubdevice.o meslist.o meslock.o me6000_dio.o me6000_ao.o
-
-me0600-objs := medevice.o medlist.o medlock.o me0600_device.o
-me0600-objs += mesubdevice.o meslist.o meslock.o me0600_relay.o me0600_ttli.o me0600_optoi.o me0600_dio.o me0600_ext_irq.o
-
-me8100-objs := medevice.o medlist.o medlock.o me8100_device.o
-me8100-objs += mesubdevice.o meslist.o meslock.o me8100_di.o me8100_do.o me8254.o
-
-me8200-objs := medevice.o medlist.o medlock.o me8200_device.o
-me8200-objs += mesubdevice.o meslist.o meslock.o me8200_di.o me8200_do.o me8200_dio.o
-
-me0900-objs := medevice.o medlist.o medlock.o me0900_device.o
-me0900-objs += mesubdevice.o meslist.o meslock.o me0900_do.o me0900_di.o
diff --git a/drivers/staging/meilhaus/TODO b/drivers/staging/meilhaus/TODO
deleted file mode 100644
index d6ce398..0000000
--- a/drivers/staging/meilhaus/TODO
+++ /dev/null
@@ -1,10 +0,0 @@
-TODO:
-	- checkpatch.pl cleanups
-	- sparse issues
-	- Lindent
-	- audit userspace interface
-	- handle firmware properly
-	- possible comedi merge
-
-Please send cleanup patches to Greg Kroah-Hartman <greg@xxxxxxxxx>
-and CC: David Kiliani <mail@xxxxxxxxxxxxxxx> and Meilhaus Support <support@xxxxxxxxxxx>
diff --git a/drivers/staging/meilhaus/me0600_device.c b/drivers/staging/meilhaus/me0600_device.c
deleted file mode 100644
index bae17d2..0000000
--- a/drivers/staging/meilhaus/me0600_device.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/**
- * @file me0600_device.c
- *
- * @brief ME-630 device class implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-#include "medevice.h"
-#include "me0600_device.h"
-#include "mesubdevice.h"
-#include "me0600_relay.h"
-#include "me0600_ttli.h"
-#include "me0600_optoi.h"
-#include "me0600_dio.h"
-#include "me0600_ext_irq.h"
-
-me_device_t *me0600_pci_constructor(struct pci_dev *pci_device)
-{
-	me0600_device_t *me0600_device;
-	me_subdevice_t *subdevice;
-	unsigned int version_idx;
-	int err;
-	int i;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me0600_device = kmalloc(sizeof(me0600_device_t), GFP_KERNEL);
-
-	if (!me0600_device) {
-		PERROR("Cannot get memory for device instance.\n");
-		return NULL;
-	}
-
-	memset(me0600_device, 0, sizeof(me0600_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me0600_device, pci_device);
-
-	if (err) {
-		kfree(me0600_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-
-	/* Get the index in the device version information table. */
-	version_idx =
-	    me0600_versions_get_device_index(me0600_device->base.info.pci.
-					     device_id);
-
-	// Initialize spin lock .
-	spin_lock_init(&me0600_device->dio_ctrl_reg_lock);
-	spin_lock_init(&me0600_device->intcsr_lock);
-
-	// Create subdevice instances.
-
-	for (i = 0; i < me0600_versions[version_idx].optoi_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me0600_optoi_constructor(me0600_device->
-								base.info.pci.
-								reg_bases[2]);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me0600_device);
-			kfree(me0600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me0600_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me0600_versions[version_idx].relay_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me0600_relay_constructor(me0600_device->
-								base.info.pci.
-								reg_bases[2]);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me0600_device);
-			kfree(me0600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me0600_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me0600_versions[version_idx].ttli_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me0600_ttli_constructor(me0600_device->
-							       base.info.pci.
-							       reg_bases[2]);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me0600_device);
-			kfree(me0600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me0600_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me0600_versions[version_idx].dio_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me0600_dio_constructor(me0600_device->
-							      base.info.pci.
-							      reg_bases[2], i,
-							      &me0600_device->
-							      dio_ctrl_reg_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me0600_device);
-			kfree(me0600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me0600_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me0600_versions[version_idx].ext_irq_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *)
-		    me0600_ext_irq_constructor(me0600_device->base.info.pci.
-					       reg_bases[1],
-					       me0600_device->base.info.pci.
-					       reg_bases[2],
-					       &me0600_device->intcsr_lock, i,
-					       me0600_device->base.irq);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me0600_device);
-			kfree(me0600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me0600_device->base.slist,
-					    subdevice);
-	}
-
-	return (me_device_t *) me0600_device;
-}
-EXPORT_SYMBOL(me0600_pci_constructor);
-
-// Init and exit of module.
-
-static int __init me0600_init(void)
-{
-	PDEBUG("executed.\n");
-	return 0;
-}
-
-static void __exit me0600_exit(void)
-{
-	PDEBUG("executed.\n");
-}
-
-module_init(me0600_init);
-
-module_exit(me0600_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR
-    ("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx> & Krzysztof Gantzke <k.gantzke@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for ME-6xx Device");
-MODULE_SUPPORTED_DEVICE("Meilhaus ME-6xx Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me0600_device.h b/drivers/staging/meilhaus/me0600_device.h
deleted file mode 100644
index 75bd3b7..0000000
--- a/drivers/staging/meilhaus/me0600_device.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/**
- * @file me0600_device.h
- *
- * @brief ME-630 device class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_DEVICE_H
-#define _ME0600_DEVICE_H
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure holding ME-630 device capabilities.
- */
-typedef struct me0600_version {
-	uint16_t device_id;
-	unsigned int relay_subdevices;
-	unsigned int ttli_subdevices;
-	unsigned int optoi_subdevices;
-	unsigned int dio_subdevices;
-	unsigned int ext_irq_subdevices;
-} me0600_version_t;
-
-/**
- * @brief Device capabilities.
- */
-static me0600_version_t me0600_versions[] = {
-	{PCI_DEVICE_ID_MEILHAUS_ME0630, 1, 1, 1, 2, 2},
-	{0},
-};
-
-#define ME0600_DEVICE_VERSIONS (ARRAY_SIZE(me0600_versions) - 1)	/**< Returns the number of entries in #me0600_versions. */
-
-/**
- * @brief Returns the index of the device entry in #me0600_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #me0600_versions.
- */
-static inline unsigned int me0600_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < ME0600_DEVICE_VERSIONS; i++)
-		if (me0600_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-/**
- * @brief The ME-630 device class structure.
- */
-typedef struct me0600_device {
-	me_device_t base;			/**< The Meilhaus device base class. */
-
-	/* Child class attributes. */
-	spinlock_t dio_ctrl_reg_lock;
-	spinlock_t intcsr_lock;
-} me0600_device_t;
-
-/**
- * @brief The ME-630 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-630 device instance. \n
- *         NULL on error.
- */
-me_device_t *me0600_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_dio.c b/drivers/staging/meilhaus/me0600_dio.c
deleted file mode 100644
index d293035..0000000
--- a/drivers/staging/meilhaus/me0600_dio.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/**
- * @file me0600_dio.c
- *
- * @brief ME-630 digital input/output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me0600_dio_reg.h"
-#include "me0600_dio.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me0600_dio_io_reset_subdevice(struct me_subdevice *subdevice,
-					 struct file *filep, int flags)
-{
-	me0600_dio_subdevice_t *instance;
-	uint8_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_dio_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inb(instance->ctrl_reg);
-	mode &= ~(0x3 << (instance->dio_idx * 2));
-	outb(mode, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, mode);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outb(0x00, instance->port_reg);
-	PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_reg - instance->reg_base, 0x00);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_dio_io_single_config(me_subdevice_t *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int single_config,
-				       int ref,
-				       int trig_chan,
-				       int trig_type, int trig_edge, int flags)
-{
-	me0600_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t mode;
-	int size =
-	    flags & (ME_IO_SINGLE_CONFIG_DIO_BIT | ME_IO_SINGLE_CONFIG_DIO_BYTE
-		     | ME_IO_SINGLE_CONFIG_DIO_WORD |
-		     ME_IO_SINGLE_CONFIG_DIO_DWORD);
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inb(instance->ctrl_reg);
-	switch (size) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-				mode &=
-				    ~((ME0600_DIO_CONFIG_BIT_OUT_0) <<
-				      (instance->dio_idx * 2));
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-				mode &=
-				    ~((ME0600_DIO_CONFIG_BIT_OUT_0) <<
-				      (instance->dio_idx * 2));
-				mode |=
-				    ME0600_DIO_CONFIG_BIT_OUT_0 << (instance->
-								    dio_idx *
-								    2);
-			} else {
-				PERROR
-				    ("Invalid port configuration specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!err) {
-		outb(mode, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, mode);
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_dio_io_single_read(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int *value, int time_out, int flags)
-{
-	me0600_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME0600_DIO_CONFIG_BIT_OUT_0) <<
-					     (instance->dio_idx * 2));
-
-			if ((mode ==
-			     (ME0600_DIO_CONFIG_BIT_OUT_0 <<
-			      (instance->dio_idx * 2))) || !mode) {
-				*value =
-				    inb(instance->
-					port_reg) & (0x0001 << channel);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME0600_DIO_CONFIG_BIT_OUT_0) <<
-					     (instance->dio_idx * 2));
-
-			if ((mode ==
-			     (ME0600_DIO_CONFIG_BIT_OUT_0 <<
-			      (instance->dio_idx * 2))) || !mode) {
-				*value = inb(instance->port_reg) & 0x00FF;
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-
-		err = ME_ERRNO_INVALID_FLAGS;
-
-		break;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_dio_io_single_write(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int value, int time_out, int flags)
-{
-	me0600_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t mode;
-	uint8_t byte;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	switch (flags) {
-
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME0600_DIO_CONFIG_BIT_OUT_0) <<
-					     (instance->dio_idx * 2));
-
-			if (mode ==
-			    (ME0600_DIO_CONFIG_BIT_OUT_0 <<
-			     (instance->dio_idx * 2))) {
-				byte = inb(instance->port_reg);
-
-				if (value)
-					byte |= 0x1 << channel;
-				else
-					byte &= ~(0x1 << channel);
-
-				outb(byte, instance->port_reg);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME0600_DIO_CONFIG_BIT_OUT_0) <<
-					     (instance->dio_idx * 2));
-
-			if (mode ==
-			    (ME0600_DIO_CONFIG_BIT_OUT_0 <<
-			     (instance->dio_idx * 2))) {
-				outb(value, instance->port_reg);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-
-		err = ME_ERRNO_INVALID_FLAGS;
-
-		break;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_dio_query_number_channels(me_subdevice_t *subdevice,
-					    int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_dio_query_subdevice_type(me_subdevice_t *subdevice,
-					   int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DIO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_dio_query_subdevice_caps(me_subdevice_t *subdevice,
-					   int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_DIO_DIR_BYTE;
-	return ME_ERRNO_SUCCESS;
-}
-
-me0600_dio_subdevice_t *me0600_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t *ctrl_reg_lock)
-{
-	me0600_dio_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me0600_dio_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me0600_dio_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	/* Initialize spin locks. */
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save digital i/o index */
-	subdevice->dio_idx = dio_idx;
-
-	/* Save the subdevice index */
-	subdevice->ctrl_reg = reg_base + ME0600_DIO_CONFIG_REG;
-	subdevice->port_reg = reg_base + ME0600_DIO_PORT_REG + dio_idx;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me0600_dio_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me0600_dio_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me0600_dio_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me0600_dio_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me0600_dio_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me0600_dio_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me0600_dio_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me0600_dio.h b/drivers/staging/meilhaus/me0600_dio.h
deleted file mode 100644
index 5d075c7..0000000
--- a/drivers/staging/meilhaus/me0600_dio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/**
- * @file me0600_dio.h
- *
- * @brief ME-630 digital input/output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_DIO_H_
-#define _ME0600_DIO_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me0600_dio_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg from concurrent access. */
-	unsigned int dio_idx;			/**< The index of the digital i/o on the device. */
-
-	unsigned long port_reg;			/**< Register holding the port status. */
-	unsigned long ctrl_reg;			/**< Register to configure the port direction. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me0600_dio_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-630 digital input/ouput subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param dio_idx The index of the digital i/o port on the device.
- * @param ctrl_reg_lock Spin lock protecting the control register.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me0600_dio_subdevice_t *me0600_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_dio_reg.h b/drivers/staging/meilhaus/me0600_dio_reg.h
deleted file mode 100644
index f116ea3..0000000
--- a/drivers/staging/meilhaus/me0600_dio_reg.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/**
- * @file me0600_dio_reg.h
- *
- * @brief ME-630 digital input/output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_DIO_REG_H_
-#define _ME0600_DIO_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME0600_DIO_CONFIG_REG		0x0007
-#define ME0600_DIO_PORT_0_REG		0x0008
-#define ME0600_DIO_PORT_1_REG		0x0009
-#define ME0600_DIO_PORT_REG			ME0600_DIO_PORT_0_REG
-
-#define ME0600_DIO_CONFIG_BIT_OUT_0	0x0001
-#define ME0600_DIO_CONFIG_BIT_OUT_1	0x0004
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_ext_irq.c b/drivers/staging/meilhaus/me0600_ext_irq.c
deleted file mode 100644
index 1d09842..0000000
--- a/drivers/staging/meilhaus/me0600_ext_irq.c
+++ /dev/null
@@ -1,469 +0,0 @@
-/**
- * @file me0600_ext_irq.c
- *
- * @brief ME-630 external interrupt subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-#include "meids.h"
-#include "medebug.h"
-
-#include "meplx_reg.h"
-#include "me0600_ext_irq_reg.h"
-#include "me0600_ext_irq.h"
-
-/*
- * Functions
- */
-
-static int me0600_ext_irq_io_irq_start(struct me_subdevice *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int irq_source,
-				       int irq_edge, int irq_arg, int flags)
-{
-	me0600_ext_irq_subdevice_t *instance;
-	uint32_t tmp;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_ext_irq_subdevice_t *) subdevice;
-
-	if (flags & ~ME_IO_IRQ_START_DIO_BIT) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (instance->lintno > 1) {
-		PERROR("Wrong idx=%d.\n", instance->lintno);
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (irq_source != ME_IRQ_SOURCE_DIO_LINE) {
-		PERROR("Invalid irq source specified.\n");
-		return ME_ERRNO_INVALID_IRQ_SOURCE;
-	}
-
-	if (irq_edge != ME_IRQ_EDGE_RISING) {
-		PERROR("Invalid irq edge specified.\n");
-		return ME_ERRNO_INVALID_IRQ_EDGE;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->intcsr_lock);
-	tmp = inl(instance->intcsr);
-	switch (instance->lintno) {
-	case 0:
-		tmp |=
-		    PLX_INTCSR_LOCAL_INT1_EN | PLX_INTCSR_LOCAL_INT1_POL |
-		    PLX_INTCSR_PCI_INT_EN;
-		break;
-	case 1:
-		tmp |=
-		    PLX_INTCSR_LOCAL_INT2_EN | PLX_INTCSR_LOCAL_INT2_POL |
-		    PLX_INTCSR_PCI_INT_EN;
-		break;
-	}
-	outl(tmp, instance->intcsr);
-	PDEBUG_REG("intcsr outl(plx:0x%X)=0x%x\n", instance->intcsr, tmp);
-	spin_unlock(instance->intcsr_lock);
-	instance->rised = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_ext_irq_io_irq_wait(struct me_subdevice *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int *irq_count,
-				      int *value, int time_out, int flags)
-{
-	me0600_ext_irq_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	long t = 0;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_ext_irq_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		t = (time_out * HZ) / 1000;
-
-		if (t == 0)
-			t = 1;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (instance->rised <= 0) {
-		instance->rised = 0;
-
-		if (time_out) {
-			t = wait_event_interruptible_timeout(instance->
-							     wait_queue,
-							     (instance->rised !=
-							      0), t);
-
-			if (t == 0) {
-				PERROR("Wait on interrupt timed out.\n");
-				err = ME_ERRNO_TIMEOUT;
-			}
-		} else {
-			wait_event_interruptible(instance->wait_queue,
-						 (instance->rised != 0));
-		}
-
-		if (instance->rised < 0) {
-			PERROR("Wait on interrupt aborted by user.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-	}
-
-	if (signal_pending(current)) {
-		PERROR("Wait on interrupt aborted by signal.\n");
-		err = ME_ERRNO_SIGNAL;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	instance->rised = 0;
-	*irq_count = instance->n;
-	*value = 1;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_ext_irq_io_irq_stop(struct me_subdevice *subdevice,
-				      struct file *filep,
-				      int channel, int flags)
-{
-	me0600_ext_irq_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t tmp;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_ext_irq_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (instance->lintno > 1) {
-		PERROR("Wrong idx=%d.\n", instance->lintno);
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->intcsr_lock);
-	tmp = inl(instance->intcsr);
-	switch (instance->lintno) {
-	case 0:
-		tmp &= ~PLX_INTCSR_LOCAL_INT1_EN;
-		break;
-	case 1:
-		tmp &= ~PLX_INTCSR_LOCAL_INT2_EN;
-		break;
-	}
-	outl(tmp, instance->intcsr);
-	PDEBUG_REG("intcsr outl(plx:0x%X)=0x%x\n", instance->intcsr, tmp);
-	spin_unlock(instance->intcsr_lock);
-	instance->rised = -1;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_ext_irq_io_reset_subdevice(struct me_subdevice *subdevice,
-					     struct file *filep, int flags)
-{
-	me0600_ext_irq_subdevice_t *instance;
-	uint32_t tmp;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_ext_irq_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->intcsr_lock);
-	tmp = inl(instance->intcsr);
-	switch (instance->lintno) {
-	case 0:
-		tmp |= PLX_INTCSR_LOCAL_INT1_POL | PLX_INTCSR_PCI_INT_EN;
-		tmp &= ~PLX_INTCSR_LOCAL_INT1_EN;
-		break;
-	case 1:
-		tmp |= PLX_INTCSR_LOCAL_INT2_POL | PLX_INTCSR_PCI_INT_EN;
-		tmp &= ~PLX_INTCSR_LOCAL_INT2_EN;
-		break;
-	}
-	outl(tmp, instance->intcsr);
-	PDEBUG_REG("intcsr outl(plx:0x%X)=0x%x\n", instance->intcsr, tmp);
-	spin_unlock(instance->intcsr_lock);
-
-	instance->rised = -1;
-	instance->n = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_ext_irq_query_number_channels(struct me_subdevice *subdevice,
-						int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 1;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_ext_irq_query_subdevice_type(struct me_subdevice *subdevice,
-					       int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_EXT_IRQ;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_ext_irq_query_subdevice_caps(struct me_subdevice *subdevice,
-					       int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_EXT_IRQ_EDGE_RISING;
-	return ME_ERRNO_SUCCESS;
-}
-
-static void me0600_ext_irq_destructor(struct me_subdevice *subdevice)
-{
-	me0600_ext_irq_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_ext_irq_subdevice_t *) subdevice;
-
-	free_irq(instance->irq, (void *)instance);
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-static irqreturn_t me0600_isr(int irq, void *dev_id)
-{
-	me0600_ext_irq_subdevice_t *instance;
-	uint32_t status;
-	uint32_t mask = PLX_INTCSR_PCI_INT_EN;
-	irqreturn_t ret = IRQ_HANDLED;
-
-	instance = (me0600_ext_irq_subdevice_t *) dev_id;
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	PDEBUG("executed.\n");
-
-	if (instance->lintno > 1) {
-		PERROR_CRITICAL
-		    ("%s():Wrong subdevice index=%d plx:irq_status_reg=0x%04X.\n",
-		     __func__, instance->lintno, inl(instance->intcsr));
-		return IRQ_NONE;
-	}
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->intcsr_lock);
-	status = inl(instance->intcsr);
-	switch (instance->lintno) {
-	case 0:
-		mask |= PLX_INTCSR_LOCAL_INT1_STATE | PLX_INTCSR_LOCAL_INT1_EN;
-		break;
-	case 1:
-		mask |= PLX_INTCSR_LOCAL_INT2_STATE | PLX_INTCSR_LOCAL_INT2_EN;
-		break;
-	}
-
-	if ((status & mask) == mask) {
-		instance->rised = 1;
-		instance->n++;
-		inb(instance->reset_reg);
-		PDEBUG("Interrupt detected.\n");
-	} else {
-		PINFO
-		    ("%ld Shared interrupt. %s(): idx=0 plx:irq_status_reg=0x%04X\n",
-		     jiffies, __func__, status);
-		ret = IRQ_NONE;
-	}
-	spin_unlock(instance->intcsr_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return ret;
-}
-
-me0600_ext_irq_subdevice_t *me0600_ext_irq_constructor(uint32_t plx_reg_base,
-						       uint32_t me0600_reg_base,
-						       spinlock_t *intcsr_lock,
-						       unsigned ext_irq_idx,
-						       int irq)
-{
-	me0600_ext_irq_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me0600_ext_irq_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for 630_ext_irq instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me0600_ext_irq_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->intcsr_lock = intcsr_lock;
-
-	/* Initialize wait queue */
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	subdevice->lintno = ext_irq_idx;
-
-	/* Request interrupt line */
-	subdevice->irq = irq;
-
-	err = request_irq(subdevice->irq, me0600_isr,
-			  IRQF_DISABLED | IRQF_SHARED,
-			  ME0600_NAME, (void *)subdevice);
-
-	if (err) {
-		PERROR("Cannot get interrupt line.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	PINFO("Registered irq=%d.\n", subdevice->irq);
-
-	/* Initialize registers */
-	subdevice->intcsr = plx_reg_base + PLX_INTCSR;
-	subdevice->reset_reg =
-	    me0600_reg_base + ME0600_INT_0_RESET_REG + ext_irq_idx;
-
-	/* Initialize the subdevice methods */
-	subdevice->base.me_subdevice_io_irq_start = me0600_ext_irq_io_irq_start;
-	subdevice->base.me_subdevice_io_irq_wait = me0600_ext_irq_io_irq_wait;
-	subdevice->base.me_subdevice_io_irq_stop = me0600_ext_irq_io_irq_stop;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me0600_ext_irq_io_reset_subdevice;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me0600_ext_irq_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me0600_ext_irq_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me0600_ext_irq_query_subdevice_caps;
-	subdevice->base.me_subdevice_destructor = me0600_ext_irq_destructor;
-
-	subdevice->rised = 0;
-	subdevice->n = 0;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me0600_ext_irq.h b/drivers/staging/meilhaus/me0600_ext_irq.h
deleted file mode 100644
index f5f2204..0000000
--- a/drivers/staging/meilhaus/me0600_ext_irq.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/**
- * @file me0600_ext_irq.h
- *
- * @brief ME-630 external interrupt implementation.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _ME0600_EXT_IRQ_H_
-#define _ME0600_EXT_IRQ_H_
-
-#include <linux/sched.h>
-
-#include "mesubdevice.h"
-#include "meslock.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The ME-630 external interrupt subdevice class.
- */
-typedef struct me0600_ext_irq_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *intcsr_lock;		/**< Spin lock to protect #intcsr. */
-
-	wait_queue_head_t wait_queue;		/**< Queue to put on threads waiting for an interrupt. */
-
-	int irq;				/**< The irq number assigned by PCI BIOS. */
-	int rised;				/**< If true an interrupt has occured. */
-	unsigned int n;				/**< The number of interrupt since the driver was loaded. */
-	unsigned int lintno;			/**< The number of the local PCI interrupt. */
-
-	uint32_t intcsr;			/**< The PLX interrupt control and status register. */
-	uint32_t reset_reg;			/**< The control register. */
-} me0600_ext_irq_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-630 external interrupt instance.
- *
- * @param plx_reg_base The register base address of the PLX chip as returned by the PCI BIOS.
- * @param me0600_reg_base The register base address of the ME-630 device as returned by the PCI BIOS.
- * @param irq The irq assigned by the PCI BIOS.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me0600_ext_irq_subdevice_t *me0600_ext_irq_constructor(uint32_t plx_reg_base,
-						       uint32_t me0600_reg_base,
-						       spinlock_t * intcsr_lock,
-						       unsigned int ext_irq_idx,
-						       int irq);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_ext_irq_reg.h b/drivers/staging/meilhaus/me0600_ext_irq_reg.h
deleted file mode 100644
index f6198fa..0000000
--- a/drivers/staging/meilhaus/me0600_ext_irq_reg.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/**
- * @file me0600_ext_irq_reg.h
- *
- * @brief ME-630 external interrupt register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _ME0600_EXT_IRQ_REG_H_
-#define _ME0600_EXT_IRQ_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME0600_INT_0_RESET_REG     0x0005
-#define ME0600_INT_1_RESET_REG     0x0006
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_optoi.c b/drivers/staging/meilhaus/me0600_optoi.c
deleted file mode 100644
index 43f710f..0000000
--- a/drivers/staging/meilhaus/me0600_optoi.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/**
- * @file me0600_optoi.c
- *
- * @brief ME-630 Optoisolated input subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me0600_optoi_reg.h"
-#include "me0600_optoi.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me0600_optoi_io_reset_subdevice(struct me_subdevice *subdevice,
-					   struct file *filep, int flags)
-{
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	PDEBUG("executed.\n");
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_optoi_io_single_config(me_subdevice_t *subdevice,
-					 struct file *filep,
-					 int channel,
-					 int single_config,
-					 int ref,
-					 int trig_chan,
-					 int trig_type,
-					 int trig_edge, int flags)
-{
-	me0600_optoi_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_optoi_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config != ME_SINGLE_CONFIG_DIO_INPUT) {
-				PERROR("Invalid port direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-
-		err = ME_ERRNO_INVALID_FLAGS;
-
-		break;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_optoi_io_single_read(me_subdevice_t *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int *value, int time_out, int flags)
-{
-	me0600_optoi_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_optoi_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = inb(instance->port_reg) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = inb(instance->port_reg);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_optoi_query_number_channels(me_subdevice_t *subdevice,
-					      int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_optoi_query_subdevice_type(me_subdevice_t *subdevice,
-					     int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DI;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_optoi_query_subdevice_caps(me_subdevice_t *subdevice,
-					     int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-me0600_optoi_subdevice_t *me0600_optoi_constructor(uint32_t reg_base)
-{
-	me0600_optoi_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me0600_optoi_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me0600_optoi_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	/* Initialize spin locks. */
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	/* Save the subdevice index */
-	subdevice->port_reg = reg_base + ME0600_OPTO_INPUT_REG;
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me0600_optoi_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me0600_optoi_io_single_config;
-	subdevice->base.me_subdevice_io_single_read =
-	    me0600_optoi_io_single_read;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me0600_optoi_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me0600_optoi_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me0600_optoi_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me0600_optoi.h b/drivers/staging/meilhaus/me0600_optoi.h
deleted file mode 100644
index e7e69bc..0000000
--- a/drivers/staging/meilhaus/me0600_optoi.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/**
- * @file me0600_optoi.h
- *
- * @brief ME-630 Optoisolated input subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_OPTOI_H_
-#define _ME0600_OPTOI_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me0600_optoi_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-
-	uint32_t port_reg;			/**< Register holding the port status. */
-} me0600_optoi_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-630 Optoisolated input subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me0600_optoi_subdevice_t *me0600_optoi_constructor(uint32_t reg_base);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_optoi_reg.h b/drivers/staging/meilhaus/me0600_optoi_reg.h
deleted file mode 100644
index e0bc450..0000000
--- a/drivers/staging/meilhaus/me0600_optoi_reg.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/**
- * @file me0600_optoi_reg.h
- *
- * @brief ME-630 Optoisolated input subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_OPTOI_REG_H_
-#define _ME0600_OPTOI_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME0600_OPTO_INPUT_REG      0x0004
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_relay.c b/drivers/staging/meilhaus/me0600_relay.c
deleted file mode 100644
index 03835e3..0000000
--- a/drivers/staging/meilhaus/me0600_relay.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/**
- * @file me0600_relay.c
- *
- * @brief ME-630 relay subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me0600_relay_reg.h"
-#include "me0600_relay.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me0600_relay_io_reset_subdevice(struct me_subdevice *subdevice,
-					   struct file *filep, int flags)
-{
-	me0600_relay_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_relay_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	outb(0x0, instance->port_0_reg);
-	PDEBUG_REG("port_0_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_0_reg - instance->reg_base, 0);
-	outb(0x0, instance->port_1_reg);
-	PDEBUG_REG("port_1_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_1_reg - instance->reg_base, 0);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_relay_io_single_config(me_subdevice_t *subdevice,
-					 struct file *filep,
-					 int channel,
-					 int single_config,
-					 int ref,
-					 int trig_chan,
-					 int trig_type,
-					 int trig_edge, int flags)
-{
-	me0600_relay_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_relay_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_WORD:
-		if (channel == 0) {
-			if (single_config != ME_SINGLE_CONFIG_DIO_OUTPUT) {
-				PERROR("Invalid word direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-
-		err = ME_ERRNO_INVALID_FLAGS;
-
-		break;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_relay_io_single_read(me_subdevice_t *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int *value, int time_out, int flags)
-{
-	me0600_relay_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_relay_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = inb(instance->port_0_reg) & (0x1 << channel);
-		} else if ((channel >= 8) && (channel < 16)) {
-			*value =
-			    inb(instance->port_1_reg) & (0x1 << (channel - 8));
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = inb(instance->port_0_reg);
-		} else if (channel == 1) {
-			*value = inb(instance->port_1_reg);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_WORD:
-		if (channel == 0) {
-			*value = (uint32_t) inb(instance->port_1_reg) << 8;
-			*value |= inb(instance->port_0_reg);
-		} else {
-			PERROR("Invalid word number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_relay_io_single_write(me_subdevice_t *subdevice,
-					struct file *filep,
-					int channel,
-					int value, int time_out, int flags)
-{
-	me0600_relay_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t state;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_relay_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			state = inb(instance->port_0_reg);
-			state =
-			    value ? (state | (0x1 << channel)) : (state &
-								  ~(0x1 <<
-								    channel));
-			outb(state, instance->port_0_reg);
-		} else if ((channel >= 8) && (channel < 16)) {
-			state = inb(instance->port_1_reg);
-			state =
-			    value ? (state | (0x1 << (channel - 8))) : (state &
-									~(0x1 <<
-									  (channel
-									   -
-									   8)));
-			outb(state, instance->port_1_reg);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			outb(value, instance->port_0_reg);
-		} else if (channel == 1) {
-			outb(value, instance->port_1_reg);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_WORD:
-		if (channel == 0) {
-			outb(value, instance->port_0_reg);
-			outb(value >> 8, instance->port_1_reg);
-		} else {
-			PERROR("Invalid word number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-		break;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_relay_query_number_channels(me_subdevice_t *subdevice,
-					      int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 16;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_relay_query_subdevice_type(me_subdevice_t *subdevice,
-					     int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_relay_query_subdevice_caps(me_subdevice_t *subdevice,
-					     int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-me0600_relay_subdevice_t *me0600_relay_constructor(uint32_t reg_base)
-{
-	me0600_relay_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me0600_relay_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me0600_relay_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	/* Save the subdevice index */
-	subdevice->port_0_reg = reg_base + ME0600_RELAIS_0_REG;
-	subdevice->port_1_reg = reg_base + ME0600_RELAIS_1_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me0600_relay_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me0600_relay_io_single_config;
-	subdevice->base.me_subdevice_io_single_read =
-	    me0600_relay_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me0600_relay_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me0600_relay_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me0600_relay_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me0600_relay_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me0600_relay.h b/drivers/staging/meilhaus/me0600_relay.h
deleted file mode 100644
index 2ce7dca..0000000
--- a/drivers/staging/meilhaus/me0600_relay.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/**
- * @file me0600_relay.h
- *
- * @brief ME-630 relay subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_RELAY_H_
-#define _ME0600_RELAY_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me0600_relay_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-
-	unsigned long port_0_reg;			/**< Register holding the port status. */
-	unsigned long port_1_reg;			/**< Register holding the port status. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me0600_relay_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-630 relay subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param ctrl_reg_lock Spin lock protecting the control register.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me0600_relay_subdevice_t *me0600_relay_constructor(uint32_t reg_base);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_relay_reg.h b/drivers/staging/meilhaus/me0600_relay_reg.h
deleted file mode 100644
index ba4db2e..0000000
--- a/drivers/staging/meilhaus/me0600_relay_reg.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/**
- * @file me0600_relay_reg.h
- *
- * @brief ME-630 relay subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_RELAY_REG_H_
-#define _ME0600_RELAY_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME0600_RELAIS_0_REG        0x0001
-#define ME0600_RELAIS_1_REG        0x0002
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_ttli.c b/drivers/staging/meilhaus/me0600_ttli.c
deleted file mode 100644
index 7d970f5..0000000
--- a/drivers/staging/meilhaus/me0600_ttli.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/**
- * @file me0600_ttli.c
- *
- * @brief ME-630 TTL input subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me0600_ttli_reg.h"
-#include "me0600_ttli.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me0600_ttli_io_reset_subdevice(struct me_subdevice *subdevice,
-					  struct file *filep, int flags)
-{
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	PDEBUG("executed.\n");
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_ttli_io_single_config(me_subdevice_t *subdevice,
-					struct file *filep,
-					int channel,
-					int single_config,
-					int ref,
-					int trig_chan,
-					int trig_type, int trig_edge, int flags)
-{
-	me0600_ttli_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_ttli_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config != ME_SINGLE_CONFIG_DIO_INPUT) {
-				PERROR("Invalid port direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-
-		err = ME_ERRNO_INVALID_FLAGS;
-
-		break;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_ttli_io_single_read(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int *value, int time_out, int flags)
-{
-	me0600_ttli_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0600_ttli_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = inb(instance->port_reg) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = inb(instance->port_reg);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0600_ttli_query_number_channels(me_subdevice_t *subdevice,
-					     int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_ttli_query_subdevice_type(me_subdevice_t *subdevice,
-					    int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DI;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0600_ttli_query_subdevice_caps(me_subdevice_t *subdevice,
-					    int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-me0600_ttli_subdevice_t *me0600_ttli_constructor(uint32_t reg_base)
-{
-	me0600_ttli_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me0600_ttli_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me0600_ttli_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	/* Save the subdevice index */
-	subdevice->port_reg = reg_base + ME0600_TTL_INPUT_REG;
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me0600_ttli_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me0600_ttli_io_single_config;
-	subdevice->base.me_subdevice_io_single_read =
-	    me0600_ttli_io_single_read;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me0600_ttli_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me0600_ttli_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me0600_ttli_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me0600_ttli.h b/drivers/staging/meilhaus/me0600_ttli.h
deleted file mode 100644
index 6c90396..0000000
--- a/drivers/staging/meilhaus/me0600_ttli.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/**
- * @file me0600_ttli.h
- *
- * @brief ME-630 TTL input subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_TTLI_H_
-#define _ME0600_TTLI_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me0600_ttli_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-
-	uint32_t port_reg;			/**< Register holding the port status. */
-} me0600_ttli_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-630 TTL input subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me0600_ttli_subdevice_t *me0600_ttli_constructor(uint32_t reg_base);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0600_ttli_reg.h b/drivers/staging/meilhaus/me0600_ttli_reg.h
deleted file mode 100644
index 4f986d1..0000000
--- a/drivers/staging/meilhaus/me0600_ttli_reg.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/**
- * @file me0600_ttli_reg.h
- *
- * @brief ME-630 TTL input subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0600_TTLI_REG_H_
-#define _ME0600_TTLI_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME0600_TTL_INPUT_REG       0x0003
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0900_device.c b/drivers/staging/meilhaus/me0900_device.c
deleted file mode 100644
index e9c6884..0000000
--- a/drivers/staging/meilhaus/me0900_device.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/**
- * @file me0900_device.c
- *
- * @brief ME-9x device class implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
-*/
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-#include "medevice.h"
-#include "me0900_device.h"
-#include "me0900_reg.h"
-#include "mesubdevice.h"
-#include "me0900_do.h"
-#include "me0900_di.h"
-
-me_device_t *me0900_pci_constructor(struct pci_dev *pci_device)
-{
-	me0900_device_t *me0900_device;
-	me_subdevice_t *subdevice;
-	unsigned int version_idx;
-	int err;
-	int i;
-	int port_shift;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me0900_device = kmalloc(sizeof(me0900_device_t), GFP_KERNEL);
-
-	if (!me0900_device) {
-		PERROR("Cannot get memory for device instance.\n");
-		return NULL;
-	}
-
-	memset(me0900_device, 0, sizeof(me0900_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me0900_device, pci_device);
-
-	if (err) {
-		kfree(me0900_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-
-	/* Get the index in the device version information table. */
-	version_idx =
-	    me0900_versions_get_device_index(me0900_device->base.info.pci.
-					     device_id);
-
-	/* Initialize 8255 chip to desired mode */
-	if (me0900_device->base.info.pci.device_id ==
-	    PCI_DEVICE_ID_MEILHAUS_ME0940) {
-		outb(0x9B,
-		     me0900_device->base.info.pci.reg_bases[2] +
-		     ME0900_CTRL_REG);
-	} else if (me0900_device->base.info.pci.device_id ==
-		   PCI_DEVICE_ID_MEILHAUS_ME0950) {
-		outb(0x89,
-		     me0900_device->base.info.pci.reg_bases[2] +
-		     ME0900_CTRL_REG);
-		outb(0x00,
-		     me0900_device->base.info.pci.reg_bases[2] +
-		     ME0900_WRITE_ENABLE_REG);
-	} else if (me0900_device->base.info.pci.device_id ==
-		   PCI_DEVICE_ID_MEILHAUS_ME0960) {
-		outb(0x8B,
-		     me0900_device->base.info.pci.reg_bases[2] +
-		     ME0900_CTRL_REG);
-		outb(0x00,
-		     me0900_device->base.info.pci.reg_bases[2] +
-		     ME0900_WRITE_ENABLE_REG);
-	}
-
-	port_shift =
-	    (me0900_device->base.info.pci.device_id ==
-	     PCI_DEVICE_ID_MEILHAUS_ME0960) ? 1 : 0;
-	// Create subdevice instances.
-
-	for (i = 0; i < me0900_versions[version_idx].di_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me0900_di_constructor(me0900_device->
-							     base.info.pci.
-							     reg_bases[2],
-							     i + port_shift);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me0900_device);
-			kfree(me0900_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me0900_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me0900_versions[version_idx].do_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me0900_do_constructor(me0900_device->
-							     base.info.pci.
-							     reg_bases[2], i);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me0900_device);
-			kfree(me0900_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me0900_device->base.slist,
-					    subdevice);
-	}
-
-	return (me_device_t *) me0900_device;
-}
-EXPORT_SYMBOL(me0900_pci_constructor);
-
-// Init and exit of module.
-
-static int __init me0900_init(void)
-{
-	PDEBUG("executed.\n.");
-	return 0;
-}
-
-static void __exit me0900_exit(void)
-{
-	PDEBUG("executed.\n.");
-}
-
-module_init(me0900_init);
-module_exit(me0900_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR
-    ("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx> & Krzysztof Gantzke <k.gantzke@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for ME-9x Device");
-MODULE_SUPPORTED_DEVICE("Meilhaus ME-9x Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me0900_device.h b/drivers/staging/meilhaus/me0900_device.h
deleted file mode 100644
index 53c05e8..0000000
--- a/drivers/staging/meilhaus/me0900_device.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/**
- * @file me0900_device.h
- *
- * @brief ME-0900 (ME-9x) device class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0900_DEVICE_H
-#define _ME0900_DEVICE_H
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure holding ME-0900 (ME-9x) device capabilities.
- */
-typedef struct me0900_version {
-	uint16_t device_id;
-	unsigned int di_subdevices;
-	unsigned int do_subdevices;
-} me0900_version_t;
-
-/**
- * @brief Device capabilities.
- */
-static me0900_version_t me0900_versions[] = {
-	{PCI_DEVICE_ID_MEILHAUS_ME0940, 2, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME0950, 0, 2},
-	{PCI_DEVICE_ID_MEILHAUS_ME0960, 1, 1},
-	{0},
-};
-
-#define ME0900_DEVICE_VERSIONS (ARRAY_SIZE(me0900_versions) - 1)	/**< Returns the number of entries in #me0900_versions. */
-
-/**
- * @brief Returns the index of the device entry in #me0900_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #me0900_versions.
- */
-static inline unsigned int me0900_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < ME0900_DEVICE_VERSIONS; i++)
-		if (me0900_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-/**
- * @brief The ME-0900 (ME-9x) device class structure.
- */
-typedef struct me0900_device {
-	me_device_t base;			/**< The Meilhaus device base class. */
-} me0900_device_t;
-
-/**
- * @brief The ME-9x device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-0900 (ME-9x) device instance. \n
- *         NULL on error.
- */
-me_device_t *me0900_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0900_di.c b/drivers/staging/meilhaus/me0900_di.c
deleted file mode 100644
index b8c448f..0000000
--- a/drivers/staging/meilhaus/me0900_di.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/**
- * @file me0900_di.c
- *
- * @brief ME-9x digital input subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "meids.h"
-#include "medebug.h"
-#include "meplx_reg.h"
-#include "me0900_reg.h"
-#include "me0900_di.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me0900_di_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags)
-{
-	PDEBUG("executed.\n");
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0900_di_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me0900_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0900_di_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-			} else {
-				PERROR("Invalid byte direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0900_di_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me0900_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0900_di_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = (~inb(instance->port_reg)) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = ~inb(instance->port_reg);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0900_di_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0900_di_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DI;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0900_di_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-me0900_di_subdevice_t *me0900_di_constructor(uint32_t reg_base,
-					     unsigned int di_idx)
-{
-	me0900_di_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me0900_di_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me0900_di_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	/* Save the subdevice index. */
-	subdevice->di_idx = di_idx;
-
-	/* Initialize registers */
-	if (di_idx == 0) {
-		subdevice->ctrl_reg = reg_base + ME0900_CTRL_REG;
-		subdevice->port_reg = reg_base + ME0900_PORT_A_REG;
-	} else {
-		subdevice->ctrl_reg = reg_base + ME0900_CTRL_REG;
-		subdevice->port_reg = reg_base + ME0900_PORT_B_REG;
-	}
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me0900_di_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me0900_di_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me0900_di_io_single_read;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me0900_di_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me0900_di_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me0900_di_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me0900_di.h b/drivers/staging/meilhaus/me0900_di.h
deleted file mode 100644
index 014f134..0000000
--- a/drivers/staging/meilhaus/me0900_di.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/**
- * @file me0900_di.h
- *
- * @brief ME-9x digital input subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0900_DI_H_
-#define _ME0900_DI_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me0900_di_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-
-	unsigned int di_idx;
-
-	unsigned long ctrl_reg;
-	unsigned long port_reg;
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me0900_di_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-9x digital input subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me0900_di_subdevice_t *me0900_di_constructor(uint32_t me0900_reg_base,
-					     unsigned int di_idx);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0900_do.c b/drivers/staging/meilhaus/me0900_do.c
deleted file mode 100644
index a2275fa..0000000
--- a/drivers/staging/meilhaus/me0900_do.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/**
- * @file me0900_do.c
- *
- * @brief ME-9x digital output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me0900_reg.h"
-#include "me0900_do.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me0900_do_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags)
-{
-	me0900_do_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0900_do_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	outb(0xFF, instance->port_reg);
-	PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_reg - instance->reg_base, 0xff);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0900_do_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me0900_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0900_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-			} else {
-				PERROR("Invalid byte direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0900_do_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me0900_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0900_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = (~inb(instance->port_reg)) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = ~inb(instance->port_reg);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0900_do_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	me0900_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long state;
-
-	PDEBUG("executed.\n");
-
-	instance = (me0900_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			state = inb(instance->port_reg);
-			state =
-			    (!value) ? (state | (0x1 << channel)) : (state &
-								     ~(0x1 <<
-								       channel));
-			outb(state, instance->port_reg);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			outb(~(value), instance->port_reg);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me0900_do_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0900_do_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me0900_do_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-me0900_do_subdevice_t *me0900_do_constructor(uint32_t reg_base,
-					     unsigned int do_idx)
-{
-	me0900_do_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me0900_do_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me0900_do_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	/* Save the subdevice index */
-	subdevice->do_idx = do_idx;
-
-	/* Initialize registers */
-	if (do_idx == 0) {
-		subdevice->ctrl_reg = reg_base + ME0900_CTRL_REG;
-		subdevice->port_reg = reg_base + ME0900_PORT_A_REG;
-		subdevice->enable_reg = reg_base + ME0900_WRITE_ENABLE_REG;
-		subdevice->disable_reg = reg_base + ME0900_WRITE_DISABLE_REG;
-	} else {
-		subdevice->ctrl_reg = reg_base + ME0900_CTRL_REG;
-		subdevice->port_reg = reg_base + ME0900_PORT_B_REG;
-		subdevice->enable_reg = reg_base + ME0900_WRITE_ENABLE_REG;
-		subdevice->disable_reg = reg_base + ME0900_WRITE_DISABLE_REG;
-	}
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me0900_do_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me0900_do_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me0900_do_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me0900_do_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me0900_do_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me0900_do_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me0900_do_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me0900_do.h b/drivers/staging/meilhaus/me0900_do.h
deleted file mode 100644
index 13e8a8b..0000000
--- a/drivers/staging/meilhaus/me0900_do.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/**
- * @file me0900_do.h
- *
- * @brief ME-9x digital output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0900_DO_H_
-#define _ME0900_DO_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me0900_do_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-
-	unsigned int do_idx;
-
-	unsigned long ctrl_reg;
-	unsigned long port_reg;
-	unsigned long enable_reg;
-	unsigned long disable_reg;
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me0900_do_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-9x digital output subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param do_idx The index of the digital output subdevice on this device.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me0900_do_subdevice_t *me0900_do_constructor(uint32_t reg_base,
-					     unsigned int do_idx);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me0900_reg.h b/drivers/staging/meilhaus/me0900_reg.h
deleted file mode 100644
index 3bf163b..0000000
--- a/drivers/staging/meilhaus/me0900_reg.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/**
- * @file me0900_reg.h
- *
- * @brief ME-9x register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME0900_REG_H_
-#define _ME0900_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME0900_PORT_A_REG          0x00
-#define ME0900_PORT_B_REG          0x01
-#define ME0900_PORT_C_REG          0x02
-#define ME0900_CTRL_REG            0x03	// ( ,w)
-#define ME0900_WRITE_ENABLE_REG    0x04	// (r,w)
-#define ME0900_WRITE_DISABLE_REG   0x08	// (r,w)
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me1000_device.c b/drivers/staging/meilhaus/me1000_device.c
deleted file mode 100644
index cf0fb92..0000000
--- a/drivers/staging/meilhaus/me1000_device.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/**
- * @file me1000_device.c
- *
- * @brief ME-1000 device class implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-#include "medevice.h"
-#include "me1000_device.h"
-#include "mesubdevice.h"
-#include "me1000_dio.h"
-
-static int me1000_config_load(me_device_t *me_device, struct file *filep,
-			      me_cfg_device_entry_t *config)
-{
-	me1000_device_t *me1000_device;
-	me1000_dio_subdevice_t *dio;
-
-	PDEBUG("executed.\n");
-
-	me1000_device = (me1000_device_t *) me_device;
-
-	if (config->count == 2) {
-		if (me_slist_get_number_subdevices(&me1000_device->base.slist)
-		    == 2) {
-			// Nothing to do.
-		} else {
-			// Remove 2 extra subdevices
-			dio =
-			    (me1000_dio_subdevice_t *)
-			    me_slist_del_subdevice_tail(&me1000_device->base.
-							slist);
-			if (dio)
-				dio->base.
-				    me_subdevice_destructor((me_subdevice_t *)
-							    dio);
-
-			dio =
-			    (me1000_dio_subdevice_t *)
-			    me_slist_del_subdevice_tail(&me1000_device->base.
-							slist);
-			if (dio)
-				dio->base.
-				    me_subdevice_destructor((me_subdevice_t *)
-							    dio);
-		}
-	} else if (config->count == 4) {
-		//Add 2 subdevices
-		if (me_slist_get_number_subdevices(&me1000_device->base.slist)
-		    == 2) {
-			dio =
-			    me1000_dio_constructor(me1000_device->base.info.pci.
-						   reg_bases[2], 2,
-						   &me1000_device->ctrl_lock);
-			if (!dio) {
-				PERROR("Cannot create dio subdevice.\n");
-				return ME_ERRNO_INTERNAL;
-			}
-			me_slist_add_subdevice_tail(&me1000_device->base.slist,
-						    (me_subdevice_t *) dio);
-
-			dio =
-			    me1000_dio_constructor(me1000_device->base.info.pci.
-						   reg_bases[2], 3,
-						   &me1000_device->ctrl_lock);
-			if (!dio) {
-				dio =
-				    (me1000_dio_subdevice_t *)
-				    me_slist_del_subdevice_tail(&me1000_device->
-								base.slist);
-				if (dio)
-					dio->base.
-					    me_subdevice_destructor((me_subdevice_t *) dio);
-
-				PERROR("Cannot create dio subdevice.\n");
-				return ME_ERRNO_INTERNAL;
-			}
-			me_slist_add_subdevice_tail(&me1000_device->base.slist,
-						    (me_subdevice_t *) dio);
-		} else {
-			// Nothing to do.
-		}
-	} else {
-		PERROR("Invalid configuration.\n");
-		return ME_ERRNO_INTERNAL;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-me_device_t *me1000_pci_constructor(struct pci_dev * pci_device)
-{
-	me1000_device_t *me1000_device;
-	me_subdevice_t *subdevice;
-	int err;
-	int i;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me1000_device = kmalloc(sizeof(me1000_device_t), GFP_KERNEL);
-
-	if (!me1000_device) {
-		PERROR("Cannot get memory for ME-1000 device instance.\n");
-		return NULL;
-	}
-
-	memset(me1000_device, 0, sizeof(me1000_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me1000_device, pci_device);
-
-	if (err) {
-		kfree(me1000_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-	// Initialize spin lock .
-	spin_lock_init(&me1000_device->ctrl_lock);
-
-	for (i = 0; i < 4; i++) {
-		subdevice =
-		    (me_subdevice_t *) me1000_dio_constructor(me1000_device->
-							      base.info.pci.
-							      reg_bases[2], i,
-							      &me1000_device->
-							      ctrl_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me1000_device);
-			kfree(me1000_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me1000_device->base.slist,
-					    subdevice);
-	}
-
-	// Overwrite base class methods.
-	me1000_device->base.me_device_config_load = me1000_config_load;
-
-	return (me_device_t *) me1000_device;
-}
-EXPORT_SYMBOL(me1000_pci_constructor);
-
-// Init and exit of module.
-static int __init me1000_init(void)
-{
-	PDEBUG("executed.\n");
-	return 0;
-}
-
-static void __exit me1000_exit(void)
-{
-	PDEBUG("executed.\n");
-}
-
-module_init(me1000_init);
-module_exit(me1000_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR
-    ("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx> & Krzysztof Gantzke <k.gantzke@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for Meilhaus ME-1000 Devices");
-MODULE_SUPPORTED_DEVICE("Meilhaus ME-1000 Digital I/O Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me1000_device.h b/drivers/staging/meilhaus/me1000_device.h
deleted file mode 100644
index cbbe126..0000000
--- a/drivers/staging/meilhaus/me1000_device.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/**
- * @file me1000_device.h
- *
- * @brief ME-1000 device class instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME1000_H_
-#define _ME1000_H_
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-#define ME1000_MAGIC_NUMBER	1000
-
-/**
- * @brief The ME-1000 device class structure.
- */
-typedef struct me1000_device {
-	me_device_t base;		/**< The Meilhaus device base class. */
-	spinlock_t ctrl_lock;		/**< Guards the DIO mode register. */
-} me1000_device_t;
-
-/**
- * @brief The ME-1000 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-1000 device instance. \n
- *         NULL on error.
- */
-me_device_t *me1000_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me1000_dio.c b/drivers/staging/meilhaus/me1000_dio.c
deleted file mode 100644
index 2d7ed07..0000000
--- a/drivers/staging/meilhaus/me1000_dio.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/**
- * @file me1000_dio.c
- *
- * @brief ME-1000 DIO subdevice instance.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-#include "medebug.h"
-
-#include "me1000_dio_reg.h"
-#include "me1000_dio.h"
-
-/*
- * Defines
- */
-#define ME1000_DIO_MAGIC_NUMBER	0x1000	/**< The magic number of the class structure. */
-
-/*
- * Functions
- */
-
-static int me1000_dio_io_reset_subdevice(struct me_subdevice *subdevice,
-					 struct file *filep, int flags)
-{
-	me1000_dio_subdevice_t *instance;
-	uint32_t tmp;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1000_dio_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	tmp = inl(instance->ctrl_reg);
-	tmp &= ~(0x1 << instance->dio_idx);
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outl(0x00000000, instance->port_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, 0);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1000_dio_io_single_config(struct me_subdevice *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int single_config,
-				       int ref,
-				       int trig_chan,
-				       int trig_type, int trig_edge, int flags)
-{
-	me1000_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	int ctrl;
-	int size =
-	    flags & (ME_IO_SINGLE_CONFIG_DIO_BIT | ME_IO_SINGLE_CONFIG_DIO_BYTE
-		     | ME_IO_SINGLE_CONFIG_DIO_WORD |
-		     ME_IO_SINGLE_CONFIG_DIO_DWORD);
-
-	PDEBUG("executed.\n");
-
-	instance = (me1000_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	ctrl = inl(instance->ctrl_reg);
-
-	switch (size) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_DWORD:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-				ctrl &= ~(0x1 << instance->dio_idx);
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-				ctrl |= 0x1 << instance->dio_idx;
-			} else {
-				PERROR("Invalid port direction.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!err) {
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me1000_dio_io_single_read(struct me_subdevice *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int *value, int time_out, int flags)
-{
-	me1000_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1000_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 32)) {
-			*value = inl(instance->port_reg) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if ((channel >= 0) && (channel < 4)) {
-			*value =
-			    (inl(instance->port_reg) >> (channel * 8)) & 0xFF;
-		} else {
-			PERROR("Invalid byte number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_WORD:
-		if ((channel >= 0) && (channel < 2)) {
-			*value =
-			    (inl(instance->port_reg) >> (channel * 16)) &
-			    0xFFFF;
-		} else {
-			PERROR("Invalid word number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_DWORD:
-		if (channel == 0) {
-			*value = inl(instance->port_reg);
-		} else {
-			PERROR("Invalid dword number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me1000_dio_io_single_write(struct me_subdevice *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int value, int time_out, int flags)
-{
-	me1000_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t config;
-	uint32_t state;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1000_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	config = inl(instance->ctrl_reg) & (0x1 << instance->dio_idx);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 32)) {
-			if (config) {
-				state = inl(instance->port_reg);
-				state =
-				    value ? (state | (0x1 << channel)) : (state
-									  &
-									  ~(0x1
-									    <<
-									    channel));
-				outl(state, instance->port_reg);
-				PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->port_reg -
-					   instance->reg_base, state);
-			} else {
-				PERROR("Port is not in output mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if ((channel >= 0) && (channel < 4)) {
-			if (config) {
-				state = inl(instance->port_reg);
-				state &= ~(0xFF << (channel * 8));
-				state |= (value & 0xFF) << (channel * 8);
-				outl(state, instance->port_reg);
-				PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->port_reg -
-					   instance->reg_base, state);
-			} else {
-				PERROR("Port is not in output mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_WORD:
-		if ((channel >= 0) && (channel < 2)) {
-			if (config) {
-				state = inl(instance->port_reg);
-				state &= ~(0xFFFF << (channel * 16));
-				state |= (value & 0xFFFF) << (channel * 16);
-				outl(state, instance->port_reg);
-				PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->port_reg -
-					   instance->reg_base, state);
-			} else {
-				PERROR("Port is not in output mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid word number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_DWORD:
-		if (channel == 0) {
-			if (config) {
-				outl(value, instance->port_reg);
-				PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->port_reg -
-					   instance->reg_base, value);
-			} else {
-				PERROR("Port is not in output mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid dword number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me1000_dio_query_number_channels(struct me_subdevice *subdevice,
-					    int *number)
-{
-	PDEBUG("executed.\n");
-	*number = ME1000_DIO_NUMBER_CHANNELS;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1000_dio_query_subdevice_type(struct me_subdevice *subdevice,
-					   int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DIO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1000_dio_query_subdevice_caps(struct me_subdevice *subdevice,
-					   int *caps)
-{
-	me1000_dio_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1000_dio_subdevice_t *) subdevice;
-
-	*caps = ME_CAPS_DIO_DIR_DWORD;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-me1000_dio_subdevice_t *me1000_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t *ctrl_reg_lock)
-{
-	me1000_dio_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me1000_dio_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for ME-1000 DIO instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me1000_dio_subdevice_t));
-
-	/* Check if counter index is out of range */
-
-	if (dio_idx >= ME1000_DIO_NUMBER_PORTS) {
-		PERROR("DIO index is out of range.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save the DIO index */
-	subdevice->dio_idx = dio_idx;
-
-	/* Initialize registers. */
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-	subdevice->ctrl_reg = reg_base + ME1000_PORT_MODE;
-	subdevice->port_reg =
-	    reg_base + ME1000_PORT + (dio_idx * ME1000_PORT_STEP);
-
-	/* Override base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me1000_dio_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me1000_dio_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me1000_dio_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me1000_dio_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me1000_dio_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me1000_dio_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me1000_dio_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me1000_dio.h b/drivers/staging/meilhaus/me1000_dio.h
deleted file mode 100644
index d26e93f..0000000
--- a/drivers/staging/meilhaus/me1000_dio.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/**
- * @file me1000_dio.h
- *
- * @brief Meilhaus ME-1000 digital i/o implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME1000_DIO_H_
-#define _ME1000_DIO_H_
-
-#include "mesubdevice.h"
-#include "meslock.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The ME-1000 DIO subdevice class.
- */
-typedef struct me1000_dio_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-//      uint32_t magic;                                 /**< The magic number unique for this structure. */
-
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg and #ctrl_reg_mirror from concurrent access. */
-	int dio_idx;					/**< The index of the DIO port on the device. */
-
-	unsigned long port_reg;			/**< Register to read or write a value from or to the port respectively. */
-	unsigned long ctrl_reg;			/**< Register to configure the DIO modes. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me1000_dio_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-1000 DIO instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param dio_idx The index of the DIO on the device.
- * @param ctrl_reg_lock Pointer to spin lock protecting the control register and from concurrent access.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me1000_dio_subdevice_t *me1000_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me1000_dio_reg.h b/drivers/staging/meilhaus/me1000_dio_reg.h
deleted file mode 100644
index 4d5b38d..0000000
--- a/drivers/staging/meilhaus/me1000_dio_reg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/**
- * @file me1000_dio_reg.h
- *
- * @brief ME-1000 digital i/o register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME1000_DIO_REG_H_
-# define _ME1000_DIO_REG_H_
-
-# ifdef __KERNEL__
-
-# define ME1000_DIO_NUMBER_CHANNELS	32				/**< The number of channels per DIO port. */
-# define ME1000_DIO_NUMBER_PORTS	4				/**< The number of ports per ME-1000. */
-
-// # define ME1000_PORT_A                               0x0000                  /**< Port A base register offset. */
-// # define ME1000_PORT_B                               0x0004                  /**< Port B base register offset. */
-// # define ME1000_PORT_C                               0x0008                  /**< Port C base register offset. */
-// # define ME1000_PORT_D                               0x000C                  /**< Port D base register offset. */
-# define ME1000_PORT				0x0000			/**< Base for port's register. */
-# define ME1000_PORT_STEP			4				/**< Distance between port's register. */
-
-# define ME1000_PORT_MODE			0x0010			/**< Configuration register to switch the port direction. */
-// # define ME1000_PORT_MODE_OUTPUT_A   (1 << 0)                /**< If set, port A is in output, otherwise in input mode. */
-// # define ME1000_PORT_MODE_OUTPUT_B   (1 << 1)                /**< If set, port B is in output, otherwise in input mode. */
-// # define ME1000_PORT_MODE_OUTPUT_C   (1 << 2)                /**< If set, port C is in output, otherwise in input mode. */
-// # define ME1000_PORT_MODE_OUTPUT_D   (1 << 3)                /**< If set, port D is in output, otherwise in input mode. */
-
-# endif	//__KERNEL__
-#endif //_ME1000_DIO_REG_H_
diff --git a/drivers/staging/meilhaus/me1400_device.c b/drivers/staging/meilhaus/me1400_device.c
deleted file mode 100644
index a018b5f..0000000
--- a/drivers/staging/meilhaus/me1400_device.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/**
- * @file me1400_device.c
- *
- * @brief ME-1400 device instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * User application could also include the kernel header files. But the
- * real kernel functions are protected by #ifdef __KERNEL__.
- */
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * This must be defined before module.h is included. Not needed, when
- * it is a built in driver.
- */
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-
-#include "me1400_device.h"
-#include "me8254.h"
-#include "me8254_reg.h"
-#include "me8255.h"
-#include "me1400_ext_irq.h"
-
-me_device_t *me1400_pci_constructor(struct pci_dev *pci_device)
-{
-	int err;
-	me1400_device_t *me1400_device;
-	me_subdevice_t *subdevice;
-	unsigned int version_idx;
-	unsigned int me8255_idx;
-	unsigned int dio_idx;
-	unsigned int me8254_idx;
-	unsigned int ctr_idx;
-	unsigned int ext_irq_idx;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me1400_device = kmalloc(sizeof(me1400_device_t), GFP_KERNEL);
-
-	if (!me1400_device) {
-		PERROR("Cannot get memory for 1400ate device instance.\n");
-		return NULL;
-	}
-
-	memset(me1400_device, 0, sizeof(me1400_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me1400_device, pci_device);
-
-	if (err) {
-		kfree(me1400_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-
-	/* Check for ME1400 extension device. If detected we fake a ME-1400 D device id. */
-	if (me1400_device->base.info.pci.device_id ==
-	    PCI_DEVICE_ID_MEILHAUS_ME140C) {
-		uint8_t ctrl;
-		ctrl =
-		    inb(me1400_device->base.info.pci.reg_bases[2] +
-			ME1400D_CLK_SRC_2_REG);
-		PDEBUG_REG("xxx_reg inb(0x%X+0x%X)=0x%x\n",
-			   me1400_device->base.info.pci.reg_bases[2],
-			   ME1400D_CLK_SRC_2_REG, ctrl);
-		outb(ctrl | 0xF0,
-		     me1400_device->base.info.pci.reg_bases[2] +
-		     ME1400D_CLK_SRC_2_REG);
-		PDEBUG_REG("xxx_reg outb(0x%X+0x%X)=0x%x\n",
-			   me1400_device->base.info.pci.reg_bases[2],
-			   ME1400D_CLK_SRC_2_REG, ctrl | 0xF0);
-		ctrl =
-		    inb(me1400_device->base.info.pci.reg_bases[2] +
-			ME1400D_CLK_SRC_2_REG);
-		PDEBUG_REG("xxx_reg inb(0x%X+0x%X)=0x%x\n",
-			   me1400_device->base.info.pci.reg_bases[2],
-			   ME1400D_CLK_SRC_2_REG, ctrl);
-
-		if ((ctrl & 0xF0) == 0xF0) {
-			PINFO("ME1400 D detected.\n");
-			me1400_device->base.info.pci.device_id =
-			    PCI_DEVICE_ID_MEILHAUS_ME140D;
-		}
-	}
-
-	/* Initialize global stuff of digital i/o subdevices. */
-	for (me8255_idx = 0; me8255_idx < ME1400_MAX_8255; me8255_idx++) {
-		me1400_device->dio_current_mode[me8255_idx] = 0;
-		spin_lock_init(&me1400_device->dio_ctrl_reg_lock[me8255_idx]);
-	}
-
-	/* Initialize global stuff of counter subdevices. */
-	spin_lock_init(&me1400_device->clk_src_reg_lock);
-
-	for (me8254_idx = 0; me8254_idx < ME1400_MAX_8254; me8254_idx++)
-		spin_lock_init(&me1400_device->ctr_ctrl_reg_lock[me8254_idx]);
-
-	/* Get the index in the device version information table. */
-	version_idx =
-	    me1400_versions_get_device_index(me1400_device->base.info.pci.
-					     device_id);
-
-	/* Generate DIO subdevice instances. */
-	for (me8255_idx = 0;
-	     me8255_idx < me1400_versions[version_idx].dio_chips;
-	     me8255_idx++) {
-		for (dio_idx = 0; dio_idx < 3; dio_idx++) {
-			subdevice =
-			    (me_subdevice_t *)
-			    me8255_constructor(me1400_versions[version_idx].
-					       device_id,
-					       me1400_device->base.info.pci.
-					       reg_bases[2], me8255_idx,
-					       dio_idx,
-					       &me1400_device->
-					       dio_current_mode[me8255_idx],
-					       &me1400_device->
-					       dio_ctrl_reg_lock[me8255_idx]);
-
-			if (!subdevice) {
-				me_device_deinit((me_device_t *) me1400_device);
-				kfree(me1400_device);
-				PERROR("Cannot get memory for subdevice.\n");
-				return NULL;
-			}
-
-			me_slist_add_subdevice_tail(&me1400_device->base.slist,
-						    subdevice);
-		}
-	}
-
-	/* Generate counter subdevice instances. */
-	for (me8254_idx = 0;
-	     me8254_idx < me1400_versions[version_idx].ctr_chips;
-	     me8254_idx++) {
-		for (ctr_idx = 0; ctr_idx < 3; ctr_idx++) {
-			subdevice =
-			    (me_subdevice_t *)
-			    me8254_constructor(me1400_device->base.info.pci.
-					       device_id,
-					       me1400_device->base.info.pci.
-					       reg_bases[2], me8254_idx,
-					       ctr_idx,
-					       &me1400_device->
-					       ctr_ctrl_reg_lock[me8254_idx],
-					       &me1400_device->
-					       clk_src_reg_lock);
-
-			if (!subdevice) {
-				me_device_deinit((me_device_t *) me1400_device);
-				kfree(me1400_device);
-				PERROR("Cannot get memory for subdevice.\n");
-				return NULL;
-			}
-
-			me_slist_add_subdevice_tail(&me1400_device->base.slist,
-						    subdevice);
-		}
-	}
-
-	/* Generate external interrupt subdevice instances. */
-	for (ext_irq_idx = 0;
-	     ext_irq_idx < me1400_versions[version_idx].ext_irq_subdevices;
-	     ext_irq_idx++) {
-		subdevice =
-		    (me_subdevice_t *)
-		    me1400_ext_irq_constructor(me1400_device->base.info.pci.
-					       device_id,
-					       me1400_device->base.info.pci.
-					       reg_bases[1],
-					       me1400_device->base.info.pci.
-					       reg_bases[2],
-					       &me1400_device->clk_src_reg_lock,
-					       me1400_device->base.irq);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me1400_device);
-			kfree(me1400_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me1400_device->base.slist,
-					    subdevice);
-	}
-
-	return (me_device_t *) me1400_device;
-}
-EXPORT_SYMBOL(me1400_pci_constructor);
-
-// Init and exit of module.
-
-static int __init me1400_init(void)
-{
-	PDEBUG("executed.\n");
-	return 0;
-}
-
-static void __exit me1400_exit(void)
-{
-	PDEBUG("executed.\n");
-}
-
-module_init(me1400_init);
-module_exit(me1400_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR
-    ("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx> & Krzysztof Gantzke <k.gantzke@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for Meilhaus ME-14xx devices");
-MODULE_SUPPORTED_DEVICE("Meilhaus ME-14xx MIO devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me1400_device.h b/drivers/staging/meilhaus/me1400_device.h
deleted file mode 100644
index d20112d..0000000
--- a/drivers/staging/meilhaus/me1400_device.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/**
- * @file me1400_device.c
- *
- * @brief ME-1400 device family instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME1400_DEVICE_H_
-#define _ME1400_DEVICE_H_
-
-#include "metypes.h"
-#include "medefines.h"
-#include "meinternal.h"
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure to store device capabilities.
- */
-typedef struct me1400_version {
-	uint16_t device_id;					/**< The PCI device id of the device. */
-	unsigned int dio_chips;				/**< The number of 8255 chips on the device. */
-	unsigned int ctr_chips;				/**< The number of 8254 chips on the device. */
-	unsigned int ext_irq_subdevices;	/**< The number of external interrupt inputs on the device. */
-} me1400_version_t;
-
-/**
-  * @brief Defines for each ME-1400 device version its capabilities.
- */
-static me1400_version_t me1400_versions[] = {
-	{PCI_DEVICE_ID_MEILHAUS_ME1400, 1, 0, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME140A, 1, 1, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME140B, 2, 2, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME14E0, 1, 0, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME14EA, 1, 1, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME14EB, 2, 2, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME140C, 1, 5, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME140D, 2, 10, 1},
-	{0}
-};
-
-#define ME1400_DEVICE_VERSIONS (ARRAY_SIZE(me1400_versions) - 1)	/**< Returns the number of entries in #me1400_versions. */
-
-/**
- * @brief Returns the index of the device entry in #me1400_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #me1400_versions.
- */
-static inline unsigned int me1400_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < ME1400_DEVICE_VERSIONS; i++)
-		if (me1400_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-#define ME1400_MAX_8254		10	/**< The maximum number of 8254 counter subdevices available on any ME-1400 device. */
-#define ME1400_MAX_8255		2	/**< The maximum number of 8255 digital i/o subdevices available on any ME-1400 device. */
-
-/**
- * @brief The ME-1400 device class.
- */
-typedef struct me1400_device {
-	me_device_t base;									/**< The Meilhaus device base class. */
-
-	spinlock_t clk_src_reg_lock;						/**< Guards the 8254 clock source registers. */
-	spinlock_t ctr_ctrl_reg_lock[ME1400_MAX_8254];		/**< Guards the 8254 ctrl registers. */
-
-	int dio_current_mode[ME1400_MAX_8255];				/**< Saves the current mode setting of a single 8255 DIO chip. */
-	spinlock_t dio_ctrl_reg_lock[ME1400_MAX_8255];		/**< Guards the 8255 ctrl register and #dio_current_mode. */
-} me1400_device_t;
-
-/**
- * @brief The ME-1400 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-1400 device instance. \n
- *         NULL on error.
- */
-me_device_t *me1400_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me1400_ext_irq.c b/drivers/staging/meilhaus/me1400_ext_irq.c
deleted file mode 100644
index 6841f41..0000000
--- a/drivers/staging/meilhaus/me1400_ext_irq.c
+++ /dev/null
@@ -1,507 +0,0 @@
-/**
- * @file me1400_ext_irq.c
- *
- * @brief ME-1400 external interrupt subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-#include "medebug.h"
-#include "meids.h"
-
-#include "me1400_ext_irq.h"
-#include "me1400_ext_irq_reg.h"
-
-/*
- * Defines
- */
-#define ME1400_EXT_IRQ_MAGIC_NUMBER	0x1401	/**< The magic number of the class structure. */
-#define ME1400_EXT_IRQ_NUMBER_CHANNELS 1	/**< One channel per counter. */
-
-/*
- * Functions
- */
-
-static int me1400_ext_irq_io_irq_start(struct me_subdevice *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int irq_source,
-				       int irq_edge, int irq_arg, int flags)
-{
-	me1400_ext_irq_subdevice_t *instance;
-	unsigned long cpu_flags;
-	uint8_t tmp;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1400_ext_irq_subdevice_t *) subdevice;
-
-	if (flags & ~ME_IO_IRQ_START_DIO_BIT) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (irq_source != ME_IRQ_SOURCE_DIO_LINE) {
-		PERROR("Invalid irq source.\n");
-		return ME_ERRNO_INVALID_IRQ_SOURCE;
-	}
-
-	if (irq_edge != ME_IRQ_EDGE_RISING) {
-		PERROR("Invalid irq edge.\n");
-		return ME_ERRNO_INVALID_IRQ_EDGE;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	spin_lock(instance->clk_src_reg_lock);
-//                      // Enable IRQ on PLX
-//                      tmp = inb(instance->plx_intcs_reg) | (PLX_LOCAL_INT1_EN | PLX_LOCAL_INT1_POL | PLX_PCI_INT_EN);
-//                      outb(tmp, instance->plx_intcs_reg);
-//                      PDEBUG_REG("ctrl_reg outb(PLX:0x%lX)=0x%x\n", instance->plx_intcs_reg, tmp);
-
-	// Enable IRQ
-	switch (instance->device_id) {
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		tmp = inb(instance->ctrl_reg);
-		tmp |= ME1400CD_EXT_IRQ_CLK_EN;
-		outb(tmp, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, tmp);
-		break;
-
-	default:
-		outb(ME1400AB_EXT_IRQ_IRQ_EN, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base,
-			   ME1400AB_EXT_IRQ_IRQ_EN);
-		break;
-	}
-	spin_unlock(instance->clk_src_reg_lock);
-	instance->rised = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1400_ext_irq_io_irq_wait(struct me_subdevice *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int *irq_count,
-				      int *value, int time_out, int flags)
-{
-	me1400_ext_irq_subdevice_t *instance;
-	unsigned long cpu_flags;
-	long t = 0;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1400_ext_irq_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time out.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		/* Convert to ticks */
-		t = (time_out * HZ) / 1000;
-
-		if (t == 0)
-			t = 1;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (instance->rised <= 0) {
-		instance->rised = 0;
-		if (time_out) {
-			t = wait_event_interruptible_timeout(instance->
-							     wait_queue,
-							     (instance->rised !=
-							      0), t);
-
-			if (t == 0) {
-				PERROR("Wait on interrupt timed out.\n");
-				err = ME_ERRNO_TIMEOUT;
-			}
-		} else {
-			wait_event_interruptible(instance->wait_queue,
-						 (instance->rised != 0));
-		}
-
-		if (instance->rised < 0) {
-			PERROR("Wait on interrupt aborted by user.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-	}
-
-	if (signal_pending(current)) {
-		PERROR("Wait on interrupt aborted by signal.\n");
-		err = ME_ERRNO_SIGNAL;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	instance->rised = 0;
-	*irq_count = instance->n;
-	*value = 1;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me1400_ext_irq_io_irq_stop(struct me_subdevice *subdevice,
-				      struct file *filep,
-				      int channel, int flags)
-{
-	me1400_ext_irq_subdevice_t *instance;
-	unsigned long cpu_flags;
-	uint8_t tmp;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1400_ext_irq_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->clk_src_reg_lock);
-//                      // Disable IRQ on PLX
-//                      tmp = inb(instance->plx_intcs_reg) & ( ~(PLX_LOCAL_INT1_EN | PLX_LOCAL_INT1_POL | PLX_PCI_INT_EN));
-//                      outb(tmp, instance->plx_intcs_reg);
-//                      PDEBUG_REG("ctrl_reg outb(PLX:0x%lX)=0x%x\n", instance->plx_intcs_reg, tmp);
-
-	switch (instance->device_id) {
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		tmp = inb(instance->ctrl_reg);
-		tmp &= ~ME1400CD_EXT_IRQ_CLK_EN;
-		outb(tmp, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, tmp);
-
-		break;
-
-	default:
-		outb(0x00, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, 0x00);
-		break;
-	}
-	spin_unlock(instance->clk_src_reg_lock);
-	instance->rised = -1;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me1400_ext_irq_io_reset_subdevice(struct me_subdevice *subdevice,
-					     struct file *filep, int flags)
-{
-	me1400_ext_irq_subdevice_t *instance =
-	    (me1400_ext_irq_subdevice_t *) subdevice;
-
-	PDEBUG("executed.\n");
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	instance->n = 0;
-	return me1400_ext_irq_io_irq_stop(subdevice, filep, 0, flags);
-}
-
-static int me1400_ext_irq_query_number_channels(struct me_subdevice *subdevice,
-						int *number)
-{
-	PDEBUG("executed.\n");
-	*number = ME1400_EXT_IRQ_NUMBER_CHANNELS;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1400_ext_irq_query_subdevice_type(struct me_subdevice *subdevice,
-					       int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_EXT_IRQ;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1400_ext_irq_query_subdevice_caps(struct me_subdevice *subdevice,
-					       int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_EXT_IRQ_EDGE_RISING;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1400_ext_irq_query_subdevice_caps_args(struct me_subdevice
-						    *subdevice, int cap,
-						    int *args, int count)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static irqreturn_t me1400_ext_irq_isr(int irq, void *dev_id)
-{
-	me1400_ext_irq_subdevice_t *instance;
-	uint32_t status;
-	uint8_t tmp;
-
-	instance = (me1400_ext_irq_subdevice_t *) dev_id;
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	spin_lock(&instance->subdevice_lock);
-	status = inl(instance->plx_intcs_reg);
-//              if (!((status & PLX_LOCAL_INT1_STATE) && (status & PLX_LOCAL_INT1_EN) && (status & PLX_PCI_INT_EN)))
-	if ((status &
-	     (PLX_LOCAL_INT1_STATE | PLX_LOCAL_INT1_EN | PLX_PCI_INT_EN)) !=
-	    (PLX_LOCAL_INT1_STATE | PLX_LOCAL_INT1_EN | PLX_PCI_INT_EN)) {
-		spin_unlock(&instance->subdevice_lock);
-		PINFO("%ld Shared interrupt. %s(): irq_status_reg=0x%04X\n",
-		      jiffies, __func__, status);
-		return IRQ_NONE;
-	}
-
-	inl(instance->ctrl_reg);
-
-	PDEBUG("executed.\n");
-
-	instance->n++;
-	instance->rised = 1;
-
-	switch (instance->device_id) {
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		spin_lock(instance->clk_src_reg_lock);
-		tmp = inb(instance->ctrl_reg);
-		tmp &= ~ME1400CD_EXT_IRQ_CLK_EN;
-		outb(tmp, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outb(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, tmp);
-		tmp |= ME1400CD_EXT_IRQ_CLK_EN;
-		outb(tmp, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outb(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, tmp);
-		spin_unlock(instance->clk_src_reg_lock);
-
-		break;
-
-	default:
-		outb(0, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outb(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, 0);
-		outb(ME1400AB_EXT_IRQ_IRQ_EN, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outb(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base,
-			   ME1400AB_EXT_IRQ_IRQ_EN);
-		break;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return IRQ_HANDLED;
-}
-
-static void me1400_ext_irq_destructor(struct me_subdevice *subdevice)
-{
-	me1400_ext_irq_subdevice_t *instance;
-	uint8_t tmp;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1400_ext_irq_subdevice_t *) subdevice;
-
-	// Disable IRQ on PLX
-	tmp =
-	    inb(instance->
-		plx_intcs_reg) & (~(PLX_LOCAL_INT1_EN | PLX_LOCAL_INT1_POL |
-				    PLX_PCI_INT_EN));
-	outb(tmp, instance->plx_intcs_reg);
-	PDEBUG_REG("ctrl_reg outb(plx:0x%lX)=0x%x\n", instance->plx_intcs_reg,
-		   tmp);
-
-	free_irq(instance->irq, (void *)instance);
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-me1400_ext_irq_subdevice_t *me1400_ext_irq_constructor(uint32_t device_id,
-						       uint32_t plx_reg_base,
-						       uint32_t me1400_reg_base,
-						       spinlock_t *
-						       clk_src_reg_lock,
-						       int irq)
-{
-	me1400_ext_irq_subdevice_t *subdevice;
-	int err;
-	uint8_t tmp;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me1400_ext_irq_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for 1400_ext_irq instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me1400_ext_irq_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-	subdevice->clk_src_reg_lock = clk_src_reg_lock;
-
-	/* Initialize wait queue */
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	subdevice->irq = irq;
-
-	err = request_irq(irq, me1400_ext_irq_isr,
-			  IRQF_DISABLED | IRQF_SHARED,
-			  ME1400_NAME, (void *)subdevice);
-
-	if (err) {
-		PERROR("Can't get irq.\n");
-		me_subdevice_deinit(&subdevice->base);
-		kfree(subdevice);
-		return NULL;
-	}
-	PINFO("Registered irq=%d.\n", subdevice->irq);
-
-	/* Initialize registers */
-	subdevice->plx_intcs_reg = plx_reg_base + PLX_INTCSR_REG;
-	subdevice->ctrl_reg = me1400_reg_base + ME1400AB_EXT_IRQ_CTRL_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = me1400_reg_base;
-#endif
-
-	// Enable IRQ on PLX
-	tmp =
-	    inb(subdevice->
-		plx_intcs_reg) | (PLX_LOCAL_INT1_EN | PLX_LOCAL_INT1_POL |
-				  PLX_PCI_INT_EN);
-	outb(tmp, subdevice->plx_intcs_reg);
-	PDEBUG_REG("ctrl_reg outb(Pplx:0x%lX)=0x%x\n", subdevice->plx_intcs_reg,
-		   tmp);
-
-	/* Initialize the subdevice methods */
-	subdevice->base.me_subdevice_io_irq_start = me1400_ext_irq_io_irq_start;
-	subdevice->base.me_subdevice_io_irq_wait = me1400_ext_irq_io_irq_wait;
-	subdevice->base.me_subdevice_io_irq_stop = me1400_ext_irq_io_irq_stop;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me1400_ext_irq_io_reset_subdevice;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me1400_ext_irq_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me1400_ext_irq_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me1400_ext_irq_query_subdevice_caps;
-	subdevice->base.me_subdevice_query_subdevice_caps_args =
-	    me1400_ext_irq_query_subdevice_caps_args;
-	subdevice->base.me_subdevice_destructor = me1400_ext_irq_destructor;
-
-	subdevice->rised = 0;
-	subdevice->n = 0;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me1400_ext_irq.h b/drivers/staging/meilhaus/me1400_ext_irq.h
deleted file mode 100644
index 9b72a04..0000000
--- a/drivers/staging/meilhaus/me1400_ext_irq.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/**
- * @file me1400_ext_irq.h
- *
- * @brief ME-1400 external interrupt implementation.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _ME1400_EXT_IRQ_H_
-#define _ME1400_EXT_IRQ_H_
-
-#include <linux/sched.h>
-
-#include "mesubdevice.h"
-#include "meslock.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The ME-1400 external interrupt subdevice class.
- */
-typedef struct me1400_ext_irq_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *clk_src_reg_lock;	/**< Lock protecting the clock control register. */
-
-	wait_queue_head_t wait_queue;	/**< Queue to put on threads waiting for an interrupt. */
-
-	uint32_t device_id;				/**< The device id of the device holding the subdevice. */
-	int irq;						/**< The irq number assigned by PCI BIOS. */
-	int rised;						/**< If true an interrupt has occured. */
-	unsigned int n;					/**< The number of interrupt since the driver was loaded. */
-
-	unsigned long plx_intcs_reg;	/**< The PLX interrupt control and status register. */
-	unsigned long ctrl_reg;			/**< The control register. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me1400_ext_irq_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-1400 external interrupt instance.
- *
- * @param plx_reg_base The register base address of the PLX chip as returned by the PCI BIOS.
- * @param me1400_reg_base The register base address of the ME-1400 device as returned by the PCI BIOS.
- * @param irq The irq assigned by the PCI BIOS.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me1400_ext_irq_subdevice_t *me1400_ext_irq_constructor(uint32_t device_id,
-						       uint32_t plx_reg_base,
-						       uint32_t me1400_reg_base,
-						       spinlock_t *
-						       clk_src_reg_lock,
-						       int irq);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me1400_ext_irq_reg.h b/drivers/staging/meilhaus/me1400_ext_irq_reg.h
deleted file mode 100644
index c9740f2..0000000
--- a/drivers/staging/meilhaus/me1400_ext_irq_reg.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/**
- * @file me1400_ext_irq_reg.h
- *
- * @brief ME-1400 external interrupt register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME1400_EXT_IRQ_REG_H_
-# define _ME1400_EXT_IRQ_REG_H_
-
-# ifdef __KERNEL__
-
-#  define PLX_INTCSR_REG				0x4C	/**< The PLX interrupt control and status register offset. */
-#  define PLX_ICR_REG					0x50	/**< The PLX initialization control register offset. */
-
-#  define PLX_LOCAL_INT1_EN				0x01	/**< If set the local interrupt 1 is enabled. */
-#  define PLX_LOCAL_INT1_POL			0x02	/**< If set the local interrupt 1 polarity is high active. */
-#  define PLX_LOCAL_INT1_STATE			0x04	/**< If set the local interrupt 1 is activ. */
-#  define PLX_LOCAL_INT2_EN				0x08	/**< If set the local interrupt 2 is enabled. */
-#  define PLX_LOCAL_INT2_POL			0x10	/**< If set the local interrupt 2 polarity is high active. */
-#  define PLX_LOCAL_INT2_STATE			0x20	/**< If set the local interrupt 2 is activ. */
-#  define PLX_PCI_INT_EN				0x40	/**< If set the PCI interrupt is enabled. */
-#  define PLX_SOFT_INT					0x80	/**< If set an interrupt is generated. */
-
-#  define ME1400AB_EXT_IRQ_CTRL_REG		0x11	/**< The external interrupt control register offset. */
-
-#  define ME1400AB_EXT_IRQ_CLK_EN		0x01	/**< If this bit is set, the clock output is enabled. */
-#  define ME1400AB_EXT_IRQ_IRQ_EN		0x02	/**< If set the external interrupt is enabled. Clearing this bit clears a pending interrupt. */
-
-#  define ME1400CD_EXT_IRQ_CTRL_REG		0x11	/**< The external interrupt control register offset. */
-
-#  define ME1400CD_EXT_IRQ_CLK_EN		0x10	/**< If set the external interrupt is enabled. Clearing this bit clears a pending interrupt.*/
-
-# endif	//__KERNEL__
-
-#endif //_ME1400_EXT_IRQ_REG_H_
diff --git a/drivers/staging/meilhaus/me1600_ao.c b/drivers/staging/meilhaus/me1600_ao.c
deleted file mode 100644
index 12e3c70..0000000
--- a/drivers/staging/meilhaus/me1600_ao.c
+++ /dev/null
@@ -1,1017 +0,0 @@
-/**
- * @file me1600_ao.c
- *
- * @brief ME-1600 analog output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/* Includes
- */
-
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-
-#include <linux/workqueue.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-#include "medebug.h"
-
-#include "me1600_ao_reg.h"
-#include "me1600_ao.h"
-
-/* Defines
- */
-
-static void me1600_ao_destructor(struct me_subdevice *subdevice);
-
-static void me1600_ao_work_control_task(struct work_struct *work);
-
-static int me1600_ao_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags);
-static int me1600_ao_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep, int channel,
-				      int single_config, int ref, int trig_chan,
-				      int trig_type, int trig_edge, int flags);
-static int me1600_ao_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep, int channel, int *value,
-				    int time_out, int flags);
-static int me1600_ao_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep, int channel, int value,
-				     int time_out, int flags);
-static int me1600_ao_query_number_channels(me_subdevice_t *subdevice,
-					   int *number);
-static int me1600_ao_query_subdevice_type(me_subdevice_t *subdevice, int *type,
-					  int *subtype);
-static int me1600_ao_query_subdevice_caps(me_subdevice_t *subdevice,
-					  int *caps);
-static int me1600_ao_query_range_by_min_max(me_subdevice_t *subdevice,
-					    int unit, int *min, int *max,
-					    int *maxdata, int *range);
-static int me1600_ao_query_number_ranges(me_subdevice_t *subdevice, int unit,
-					 int *count);
-static int me1600_ao_query_range_info(me_subdevice_t *subdevice, int range,
-				      int *unit, int *min, int *max,
-				      int *maxdata);
-
-/* Functions
- */
-
-me1600_ao_subdevice_t *me1600_ao_constructor(uint32_t reg_base,
-					     unsigned int ao_idx,
-					     int curr,
-					     spinlock_t *config_regs_lock,
-					     spinlock_t *ao_shadows_lock,
-					     me1600_ao_shadow_t *ao_regs_shadows,
-					     struct workqueue_struct *me1600_wq)
-{
-	me1600_ao_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed. idx=%d\n", ao_idx);
-
-	// Allocate memory for subdevice instance.
-	subdevice = kmalloc(sizeof(me1600_ao_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR
-		    ("Cannot get memory for analog output subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me1600_ao_subdevice_t));
-
-	// Initialize subdevice base class.
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-	subdevice->config_regs_lock = config_regs_lock;
-	subdevice->ao_shadows_lock = ao_shadows_lock;
-
-	// Save the subdevice index.
-	subdevice->ao_idx = ao_idx;
-
-	// Initialize range lists.
-	subdevice->u_ranges_count = 2;
-
-	subdevice->u_ranges[0].min = 0;	//0V
-	subdevice->u_ranges[0].max = 9997558;	//10V
-
-	subdevice->u_ranges[1].min = -10E6;	//-10V
-	subdevice->u_ranges[1].max = 9995117;	//10V
-
-	if (curr) {		// This is version with current outputs.
-		subdevice->i_ranges_count = 2;
-
-		subdevice->i_ranges[0].min = 0;	//0mA
-		subdevice->i_ranges[0].max = 19995117;	//20mA
-
-		subdevice->i_ranges[1].min = 4E3;	//4mA
-		subdevice->i_ranges[1].max = 19995118;	//20mA
-	} else {		// This is version without current outputs.
-		subdevice->i_ranges_count = 0;
-
-		subdevice->i_ranges[0].min = 0;	//0mA
-		subdevice->i_ranges[0].max = 0;	//0mA
-
-		subdevice->i_ranges[1].min = 0;	//0mA
-		subdevice->i_ranges[1].max = 0;	//0mA
-	}
-
-	// Initialize registers.
-	subdevice->uni_bi_reg = reg_base + ME1600_UNI_BI_REG;
-	subdevice->i_range_reg = reg_base + ME1600_020_420_REG;
-	subdevice->sim_output_reg = reg_base + ME1600_SIM_OUTPUT_REG;
-	subdevice->current_on_reg = reg_base + ME1600_CURRENT_ON_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	// Initialize shadow structure.
-	subdevice->ao_regs_shadows = ao_regs_shadows;
-
-	// Override base class methods.
-	subdevice->base.me_subdevice_destructor = me1600_ao_destructor;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me1600_ao_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me1600_ao_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me1600_ao_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me1600_ao_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me1600_ao_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me1600_ao_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me1600_ao_query_subdevice_caps;
-	subdevice->base.me_subdevice_query_range_by_min_max =
-	    me1600_ao_query_range_by_min_max;
-	subdevice->base.me_subdevice_query_number_ranges =
-	    me1600_ao_query_number_ranges;
-	subdevice->base.me_subdevice_query_range_info =
-	    me1600_ao_query_range_info;
-
-	// Initialize wait queue.
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	// Prepare work queue.
-	subdevice->me1600_workqueue = me1600_wq;
-
-/* workqueue API changed in kernel 2.6.20 */
-	INIT_DELAYED_WORK(&subdevice->ao_control_task,
-			  me1600_ao_work_control_task);
-	return subdevice;
-}
-
-static void me1600_ao_destructor(struct me_subdevice *subdevice)
-{
-	me1600_ao_subdevice_t *instance;
-
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	instance->ao_control_task_flag = 0;
-
-	// Reset subdevice to asure clean exit.
-	me1600_ao_io_reset_subdevice(subdevice, NULL,
-				     ME_IO_RESET_SUBDEVICE_NO_FLAGS);
-
-	// Remove any tasks from work queue. This is paranoic because it was done allready in reset().
-	if (!cancel_delayed_work(&instance->ao_control_task)) {	//Wait 2 ticks to be sure that control task is removed from queue.
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(2);
-	}
-}
-
-static int me1600_ao_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags)
-{
-	me1600_ao_subdevice_t *instance;
-	uint16_t tmp;
-
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-	(instance->ao_regs_shadows)->trigger &= ~(0x1 << instance->ao_idx);	//Cancell waiting for trigger.
-
-	// Reset all settings.
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ao_shadows_lock);
-	(instance->ao_regs_shadows)->shadow[instance->ao_idx] = 0;
-	(instance->ao_regs_shadows)->mirror[instance->ao_idx] = 0;
-	(instance->ao_regs_shadows)->trigger &= ~(0x1 << instance->ao_idx);	//Not waiting for triggering.
-	(instance->ao_regs_shadows)->synchronous &= ~(0x1 << instance->ao_idx);	//Individual triggering.
-
-	// Set output to default (safe) state.
-	spin_lock(instance->config_regs_lock);
-	tmp = inw(instance->uni_bi_reg);	// unipolar
-	tmp |= (0x1 << instance->ao_idx);
-	outw(tmp, instance->uni_bi_reg);
-	PDEBUG_REG("uni_bi_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->uni_bi_reg - instance->reg_base, tmp);
-
-	tmp = inw(instance->current_on_reg);	// Volts only!
-	tmp &= ~(0x1 << instance->ao_idx);
-	tmp &= 0x00FF;
-	outw(tmp, instance->current_on_reg);
-	PDEBUG_REG("current_on_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->current_on_reg - instance->reg_base, tmp);
-
-	tmp = inw(instance->i_range_reg);	// 0..20mA <= If exists.
-	tmp &= ~(0x1 << instance->ao_idx);
-	outw(tmp, instance->i_range_reg);
-	PDEBUG_REG("i_range_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->i_range_reg - instance->reg_base, tmp);
-
-	outw(0, (instance->ao_regs_shadows)->registry[instance->ao_idx]);
-	PDEBUG_REG("channel_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   (instance->ao_regs_shadows)->registry[instance->ao_idx] -
-		   instance->reg_base, 0);
-
-	// Trigger output.
-	outw(0x0000, instance->sim_output_reg);
-	PDEBUG_REG("sim_output_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->sim_output_reg - instance->reg_base, 0x0000);
-	outw(0xFFFF, instance->sim_output_reg);
-	PDEBUG_REG("sim_output_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->sim_output_reg - instance->reg_base, 0xFFFF);
-	spin_unlock(instance->config_regs_lock);
-	spin_unlock(instance->ao_shadows_lock);
-
-	// Set status to 'none'
-	instance->status = ao_status_none;
-	spin_unlock(&instance->subdevice_lock);
-
-	//Signal reset if user is on wait.
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1600_ao_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me1600_ao_subdevice_t *instance;
-	uint16_t tmp;
-
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	// Checking parameters.
-	if (flags) {
-		PERROR
-		    ("Invalid flag specified. Must be ME_IO_SINGLE_CONFIG_NO_FLAGS.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (trig_edge != ME_TRIG_EDGE_NONE) {
-		PERROR
-		    ("Invalid trigger edge. Software trigger has not edge. Must be ME_TRIG_EDGE_NONE\n");
-		return ME_ERRNO_INVALID_TRIG_EDGE;
-	}
-
-	if (trig_type != ME_TRIG_TYPE_SW) {
-		PERROR("Invalid trigger edge. Must be ME_TRIG_TYPE_SW.\n");
-		return ME_ERRNO_INVALID_TRIG_TYPE;
-	}
-
-	if ((trig_chan != ME_TRIG_CHAN_DEFAULT)
-	    && (trig_chan != ME_TRIG_CHAN_SYNCHRONOUS)) {
-		PERROR("Invalid trigger channel specified.\n");
-		return ME_ERRNO_INVALID_TRIG_CHAN;
-	}
-
-	if (ref != ME_REF_AO_GROUND) {
-		PERROR
-		    ("Invalid reference. Analog outputs have to have got REF_AO_GROUND.\n");
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	if (((single_config + 1) >
-	     (instance->u_ranges_count + instance->i_ranges_count))
-	    || (single_config < 0)) {
-		PERROR("Invalid range specified.\n");
-		return ME_ERRNO_INVALID_SINGLE_CONFIG;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-	// Checking parameters - done. All is fine. Do config.
-
-	ME_SUBDEVICE_ENTER;
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ao_shadows_lock);
-	(instance->ao_regs_shadows)->trigger &= ~(0x1 << instance->ao_idx);	//Cancell waiting for trigger.
-	(instance->ao_regs_shadows)->shadow[instance->ao_idx] = 0;
-	(instance->ao_regs_shadows)->mirror[instance->ao_idx] = 0;
-
-	spin_lock(instance->config_regs_lock);
-	switch (single_config) {
-	case 0:		// 0V 10V
-		tmp = inw(instance->current_on_reg);	// Volts
-		tmp &= ~(0x1 << instance->ao_idx);
-		outw(tmp, instance->current_on_reg);
-		PDEBUG_REG("current_on_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->current_on_reg - instance->reg_base, tmp);
-
-		// 0V
-		outw(0,
-		     (instance->ao_regs_shadows)->registry[instance->ao_idx]);
-		PDEBUG_REG("channel_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   (instance->ao_regs_shadows)->registry[instance->
-								 ao_idx] -
-			   instance->reg_base, 0);
-
-		tmp = inw(instance->uni_bi_reg);	// unipolar
-		tmp |= (0x1 << instance->ao_idx);
-		outw(tmp, instance->uni_bi_reg);
-		PDEBUG_REG("uni_bi_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->uni_bi_reg - instance->reg_base, tmp);
-
-		tmp = inw(instance->i_range_reg);	// 0..20mA <= If exists.
-		tmp &= ~(0x1 << instance->ao_idx);
-		outw(tmp, instance->i_range_reg);
-		PDEBUG_REG("i_range_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->i_range_reg - instance->reg_base, tmp);
-		break;
-
-	case 1:		// -10V 10V
-		tmp = inw(instance->current_on_reg);	// Volts
-		tmp &= ~(0x1 << instance->ao_idx);
-		outw(tmp, instance->current_on_reg);
-		PDEBUG_REG("current_on_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->current_on_reg - instance->reg_base, tmp);
-
-		// 0V
-		outw(0x0800,
-		     (instance->ao_regs_shadows)->registry[instance->ao_idx]);
-		PDEBUG_REG("channel_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   (instance->ao_regs_shadows)->registry[instance->
-								 ao_idx] -
-			   instance->reg_base, 0x0800);
-
-		tmp = inw(instance->uni_bi_reg);	// bipolar
-		tmp &= ~(0x1 << instance->ao_idx);
-		outw(tmp, instance->uni_bi_reg);
-		PDEBUG_REG("uni_bi_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->uni_bi_reg - instance->reg_base, tmp);
-
-		tmp = inw(instance->i_range_reg);	// 0..20mA <= If exists.
-		tmp &= ~(0x1 << instance->ao_idx);
-		outw(tmp, instance->i_range_reg);
-		PDEBUG_REG("i_range_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->i_range_reg - instance->reg_base, tmp);
-		break;
-
-	case 2:		// 0mA 20mA
-		tmp = inw(instance->current_on_reg);	// mAmpers
-		tmp |= (0x1 << instance->ao_idx);
-		outw(tmp, instance->current_on_reg);
-		PDEBUG_REG("current_on_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->current_on_reg - instance->reg_base, tmp);
-
-		tmp = inw(instance->i_range_reg);	// 0..20mA
-		tmp &= ~(0x1 << instance->ao_idx);
-		outw(tmp, instance->i_range_reg);
-		PDEBUG_REG("i_range_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->i_range_reg - instance->reg_base, tmp);
-
-		// 0mA
-		outw(0,
-		     (instance->ao_regs_shadows)->registry[instance->ao_idx]);
-		PDEBUG_REG("channel_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   (instance->ao_regs_shadows)->registry[instance->
-								 ao_idx] -
-			   instance->reg_base, 0);
-
-		tmp = inw(instance->uni_bi_reg);	// unipolar
-		tmp |= (0x1 << instance->ao_idx);
-		outw(tmp, instance->uni_bi_reg);
-		PDEBUG_REG("uni_bi_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->uni_bi_reg - instance->reg_base, tmp);
-		break;
-
-	case 3:		// 4mA 20mA
-		tmp = inw(instance->current_on_reg);	// mAmpers
-		tmp |= (0x1 << instance->ao_idx);
-		outw(tmp, instance->current_on_reg);
-		PDEBUG_REG("current_on_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->current_on_reg - instance->reg_base, tmp);
-
-		tmp = inw(instance->i_range_reg);	// 4..20mA
-		tmp |= (0x1 << instance->ao_idx);
-		outw(tmp, instance->i_range_reg);
-		PDEBUG_REG("i_range_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->i_range_reg - instance->reg_base, tmp);
-
-		// 4mA
-		outw(0,
-		     (instance->ao_regs_shadows)->registry[instance->ao_idx]);
-		PDEBUG_REG("channel_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   (instance->ao_regs_shadows)->registry[instance->
-								 ao_idx] -
-			   instance->reg_base, 0);
-
-		tmp = inw(instance->uni_bi_reg);	// unipolar
-		tmp |= (0x1 << instance->ao_idx);
-		outw(tmp, instance->uni_bi_reg);
-		PDEBUG_REG("uni_bi_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->uni_bi_reg - instance->reg_base, tmp);
-		break;
-	}
-
-	// Trigger output.
-	outw(0x0000, instance->sim_output_reg);
-	PDEBUG_REG("sim_output_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->sim_output_reg - instance->reg_base, 0x0000);
-	outw(0xFFFF, instance->sim_output_reg);
-	PDEBUG_REG("sim_output_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->sim_output_reg - instance->reg_base, 0xFFFF);
-
-	if (trig_chan == ME_TRIG_CHAN_DEFAULT) {	// Individual triggering.
-		(instance->ao_regs_shadows)->synchronous &=
-		    ~(0x1 << instance->ao_idx);
-		PDEBUG("Individual triggering.\n");
-	} else if (trig_chan == ME_TRIG_CHAN_SYNCHRONOUS) {	// Synchronous triggering.
-		(instance->ao_regs_shadows)->synchronous |=
-		    (0x1 << instance->ao_idx);
-		PDEBUG("Synchronous triggering.\n");
-	}
-	spin_unlock(instance->config_regs_lock);
-	spin_unlock(instance->ao_shadows_lock);
-
-	instance->status = ao_status_single_configured;
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1600_ao_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me1600_ao_subdevice_t *instance;
-	unsigned long delay = 0;
-	unsigned long j = 0;
-	int err = ME_ERRNO_SUCCESS;
-
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags & ~ME_IO_SINGLE_NONBLOCKING) {
-		PERROR("Invalid flag specified. %d\n", flags);
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if ((!flags) && ((instance->ao_regs_shadows)->trigger & instance->ao_idx)) {	//Blocking mode. Wait for software trigger.
-		if (time_out) {
-			delay = (time_out * HZ) / 1000;
-			if (delay == 0)
-				delay = 1;
-		}
-
-		j = jiffies;
-
-		//Only runing process will interrupt this call. Events are signaled when status change. This procedure has own timeout.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (!((instance->
-						     ao_regs_shadows)->
-						    trigger & instance->
-						    ao_idx)),
-						 (delay) ? delay : LONG_MAX);
-
-		if (instance == ao_status_none) {	// Reset was called.
-			PDEBUG("Single canceled.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		if ((delay) && ((jiffies - j) >= delay)) {
-			PDEBUG("Timeout reached.\n");
-			err = ME_ERRNO_TIMEOUT;
-		}
-	}
-
-	*value = (instance->ao_regs_shadows)->mirror[instance->ao_idx];
-
-	return err;
-}
-
-static int me1600_ao_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	me1600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long delay = 0;
-	int i;
-	unsigned long j = 0;
-
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags &
-	    ~(ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS |
-	      ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING)) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (value & ~ME1600_AO_MAX_DATA) {
-		PERROR("Invalid value provided.\n");
-		return ME_ERRNO_VALUE_OUT_OF_RANGE;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-	(instance->ao_regs_shadows)->trigger &= ~(0x1 << instance->ao_idx);	//Cancell waiting for trigger.
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-
-		if (delay == 0)
-			delay = 1;
-	}
-	//Write value.
-	spin_lock(instance->ao_shadows_lock);
-	(instance->ao_regs_shadows)->shadow[instance->ao_idx] =
-	    (uint16_t) value;
-
-	if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {	// Trigger all outputs from synchronous list.
-		for (i = 0; i < (instance->ao_regs_shadows)->count; i++) {
-			if (((instance->ao_regs_shadows)->synchronous & (0x1 << i)) || (i == instance->ao_idx)) {	// Set all from synchronous list to correct state.
-				PDEBUG
-				    ("Synchronous triggering: output %d. idx=%d\n",
-				     i, instance->ao_idx);
-				(instance->ao_regs_shadows)->mirror[i] =
-				    (instance->ao_regs_shadows)->shadow[i];
-
-				outw((instance->ao_regs_shadows)->shadow[i],
-				     (instance->ao_regs_shadows)->registry[i]);
-				PDEBUG_REG
-				    ("channel_reg outw(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     (instance->ao_regs_shadows)->registry[i] -
-				     instance->reg_base,
-				     (instance->ao_regs_shadows)->shadow[i]);
-
-				(instance->ao_regs_shadows)->trigger &=
-				    ~(0x1 << i);
-			}
-		}
-
-		// Trigger output.
-		outw(0x0000, instance->sim_output_reg);
-		PDEBUG_REG("sim_output_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->sim_output_reg - instance->reg_base, 0);
-		outw(0xFFFF, instance->sim_output_reg);
-		PDEBUG_REG("sim_output_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->sim_output_reg - instance->reg_base,
-			   0xFFFF);
-		instance->status = ao_status_single_end;
-	} else {		// Individual mode.
-		if ((instance->ao_regs_shadows)->synchronous & (0x1 << instance->ao_idx)) {	// Put on synchronous start list. Set output as waiting for trigger.
-			PDEBUG("Add to synchronous list. idx=%d\n",
-			       instance->ao_idx);
-			(instance->ao_regs_shadows)->trigger |=
-			    (0x1 << instance->ao_idx);
-			instance->status = ao_status_single_run;
-			PDEBUG("Synchronous list: 0x%x.\n",
-			       (instance->ao_regs_shadows)->synchronous);
-		} else {	// Fired this one.
-			PDEBUG("Triggering. idx=%d\n", instance->ao_idx);
-			(instance->ao_regs_shadows)->mirror[instance->ao_idx] =
-			    (instance->ao_regs_shadows)->shadow[instance->
-								ao_idx];
-
-			outw((instance->ao_regs_shadows)->
-			     shadow[instance->ao_idx],
-			     (instance->ao_regs_shadows)->registry[instance->
-								   ao_idx]);
-			PDEBUG_REG("channel_reg outw(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   (instance->ao_regs_shadows)->
-				   registry[instance->ao_idx] -
-				   instance->reg_base,
-				   (instance->ao_regs_shadows)->
-				   shadow[instance->ao_idx]);
-
-			// Set output as triggered.
-			(instance->ao_regs_shadows)->trigger &=
-			    ~(0x1 << instance->ao_idx);
-
-			// Trigger output.
-			outw(0x0000, instance->sim_output_reg);
-			PDEBUG_REG("sim_output_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->sim_output_reg -
-				   instance->reg_base, 0);
-			outw(0xFFFF, instance->sim_output_reg);
-			PDEBUG_REG("sim_output_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->sim_output_reg -
-				   instance->reg_base, 0xFFFF);
-			instance->status = ao_status_single_end;
-		}
-	}
-	spin_unlock(instance->ao_shadows_lock);
-
-	//Init control task
-	instance->timeout.delay = delay;
-	instance->timeout.start_time = jiffies;
-	instance->ao_control_task_flag = 1;
-	queue_delayed_work(instance->me1600_workqueue,
-			   &instance->ao_control_task, 1);
-
-	if ((!(flags & ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING)) &&
-	    ((instance->ao_regs_shadows)->trigger & instance->ao_idx)) {
-		/* Blocking mode. Wait for software trigger. */
-		if (time_out) {
-			delay = (time_out * HZ) / 1000;
-			if (delay == 0)
-				delay = 1;
-		}
-
-		j = jiffies;
-
-		//Only runing process will interrupt this call. Events are signaled when status change. This procedure has own timeout.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (!((instance->
-						     ao_regs_shadows)->
-						    trigger & instance->
-						    ao_idx)),
-						 (delay) ? delay : LONG_MAX);
-
-		if (instance == ao_status_none) {
-			PDEBUG("Single canceled.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		if ((delay) && ((jiffies - j) >= delay)) {
-			PDEBUG("Timeout reached.\n");
-			err = ME_ERRNO_TIMEOUT;
-		}
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me1600_ao_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	me1600_ao_subdevice_t *instance;
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	*number = 1;		//Every subdevice has only 1 channel.
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1600_ao_query_subdevice_type(me_subdevice_t *subdevice, int *type,
-					  int *subtype)
-{
-	me1600_ao_subdevice_t *instance;
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	*type = ME_TYPE_AO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1600_ao_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_AO_TRIG_SYNCHRONOUS;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1600_ao_query_range_by_min_max(me_subdevice_t *subdevice,
-					    int unit,
-					    int *min,
-					    int *max, int *maxdata, int *range)
-{
-	me1600_ao_subdevice_t *instance;
-	int i;
-	int r = -1;
-	int diff = 21E6;
-
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if ((*max - *min) < 0) {
-		PERROR("Invalid minimum and maximum values specified.\n");
-		return ME_ERRNO_INVALID_MIN_MAX;
-	}
-	// Maximum ranges are slightly less then 10V or 20mA. For convenient we accepted this value as valid one.
-	if (unit == ME_UNIT_VOLT) {
-		for (i = 0; i < instance->u_ranges_count; i++) {
-			if ((instance->u_ranges[i].min <= *min)
-			    && ((instance->u_ranges[i].max + 5000) >= *max)) {
-				if ((instance->u_ranges[i].max -
-				     instance->u_ranges[i].min) - (*max -
-								   *min) <
-				    diff) {
-					r = i;
-					diff =
-					    (instance->u_ranges[i].max -
-					     instance->u_ranges[i].min) -
-					    (*max - *min);
-				}
-			}
-		}
-
-		if (r < 0) {
-			PERROR("No matching range found.\n");
-			return ME_ERRNO_NO_RANGE;
-		} else {
-			*min = instance->u_ranges[r].min;
-			*max = instance->u_ranges[r].max;
-			*range = r;
-		}
-	} else if (unit == ME_UNIT_AMPERE) {
-		for (i = 0; i < instance->i_ranges_count; i++) {
-			if ((instance->i_ranges[i].min <= *min)
-			    && (instance->i_ranges[i].max + 5000 >= *max)) {
-				if ((instance->i_ranges[i].max -
-				     instance->i_ranges[i].min) - (*max -
-								   *min) <
-				    diff) {
-					r = i;
-					diff =
-					    (instance->i_ranges[i].max -
-					     instance->i_ranges[i].min) -
-					    (*max - *min);
-				}
-			}
-		}
-
-		if (r < 0) {
-			PERROR("No matching range found.\n");
-			return ME_ERRNO_NO_RANGE;
-		} else {
-			*min = instance->i_ranges[r].min;
-			*max = instance->i_ranges[r].max;
-			*range = r + instance->u_ranges_count;
-		}
-	} else {
-		PERROR("Invalid physical unit specified.\n");
-		return ME_ERRNO_INVALID_UNIT;
-	}
-	*maxdata = ME1600_AO_MAX_DATA;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1600_ao_query_number_ranges(me_subdevice_t *subdevice,
-					 int unit, int *count)
-{
-	me1600_ao_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1600_ao_subdevice_t *) subdevice;
-	switch (unit) {
-	case ME_UNIT_VOLT:
-		*count = instance->u_ranges_count;
-		break;
-	case ME_UNIT_AMPERE:
-		*count = instance->i_ranges_count;
-		break;
-	case ME_UNIT_ANY:
-		*count = instance->u_ranges_count + instance->i_ranges_count;
-		break;
-	default:
-		*count = 0;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1600_ao_query_range_info(me_subdevice_t *subdevice,
-				      int range,
-				      int *unit,
-				      int *min, int *max, int *maxdata)
-{
-	me1600_ao_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me1600_ao_subdevice_t *) subdevice;
-
-	if (((range + 1) >
-	     (instance->u_ranges_count + instance->i_ranges_count))
-	    || (range < 0)) {
-		PERROR("Invalid range number specified.\n");
-		return ME_ERRNO_INVALID_RANGE;
-	}
-
-	if (range < instance->u_ranges_count) {
-		*unit = ME_UNIT_VOLT;
-		*min = instance->u_ranges[range].min;
-		*max = instance->u_ranges[range].max;
-	} else if (range < instance->u_ranges_count + instance->i_ranges_count) {
-		*unit = ME_UNIT_AMPERE;
-		*min = instance->i_ranges[range - instance->u_ranges_count].min;
-		*max = instance->i_ranges[range - instance->u_ranges_count].max;
-	}
-	*maxdata = ME1600_AO_MAX_DATA;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static void me1600_ao_work_control_task(struct work_struct *work)
-{
-	me1600_ao_subdevice_t *instance;
-	int reschedule = 1;
-	int signaling = 0;
-
-	instance =
-	    container_of((void *)work, me1600_ao_subdevice_t, ao_control_task);
-
-	PINFO("<%s: %ld> executed. idx=%d\n", __func__, jiffies,
-	      instance->ao_idx);
-
-	if (!((instance->ao_regs_shadows)->trigger & instance->ao_idx)) {	// Output was triggerd.
-		// Signal the end.
-		signaling = 1;
-		reschedule = 0;
-		if (instance->status == ao_status_single_run) {
-			instance->status = ao_status_single_end;
-		}
-
-	} else if ((instance->timeout.delay) && ((jiffies - instance->timeout.start_time) >= instance->timeout.delay)) {	// Timeout
-		PDEBUG("Timeout reached.\n");
-		spin_lock(instance->ao_shadows_lock);
-		// Restore old settings.
-		PDEBUG("Write old value back to register.\n");
-		(instance->ao_regs_shadows)->shadow[instance->ao_idx] =
-		    (instance->ao_regs_shadows)->mirror[instance->ao_idx];
-
-		outw((instance->ao_regs_shadows)->mirror[instance->ao_idx],
-		     (instance->ao_regs_shadows)->registry[instance->ao_idx]);
-		PDEBUG_REG("channel_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   (instance->ao_regs_shadows)->registry[instance->
-								 ao_idx] -
-			   instance->reg_base,
-			   (instance->ao_regs_shadows)->mirror[instance->
-							       ao_idx]);
-
-		//Remove from synchronous strt list.
-		(instance->ao_regs_shadows)->trigger &=
-		    ~(0x1 << instance->ao_idx);
-		if (instance->status == ao_status_none) {
-			instance->status = ao_status_single_end;
-		}
-		spin_unlock(instance->ao_shadows_lock);
-
-		// Signal the end.
-		signaling = 1;
-		reschedule = 0;
-	}
-
-	if (signaling) {	//Signal it.
-		wake_up_interruptible_all(&instance->wait_queue);
-	}
-
-	if (instance->ao_control_task_flag && reschedule) {	// Reschedule task
-		queue_delayed_work(instance->me1600_workqueue,
-				   &instance->ao_control_task, 1);
-	} else {
-		PINFO("<%s> Ending control task.\n", __func__);
-	}
-
-}
diff --git a/drivers/staging/meilhaus/me1600_ao.h b/drivers/staging/meilhaus/me1600_ao.h
deleted file mode 100644
index 4827dcb..0000000
--- a/drivers/staging/meilhaus/me1600_ao.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/**
- * @file me1600_ao.h
- *
- * @brief Meilhaus ME-1600 analog output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME1600_AO_H_
-#define _ME1600_AO_H_
-
-# include <linux/version.h>
-# include "mesubdevice.h"
-
-# ifdef __KERNEL__
-
-#  define ME1600_MAX_RANGES	2	/**< Specifies the maximum number of ranges in me1600_ao_subdevice_t::u_ranges und me1600_ao_subdevice_t::i_ranges. */
-
-/**
- * @brief Defines a entry in the range table.
- */
-typedef struct me1600_ao_range_entry {
-	int32_t min;
-	int32_t max;
-} me1600_ao_range_entry_t;
-
-typedef struct me1600_ao_timeout {
-	unsigned long start_time;
-	unsigned long delay;
-} me1600_ao_timeout_t;
-
-typedef struct me1600_ao_shadow {
-	int count;
-	unsigned long *registry;
-	uint16_t *shadow;
-	uint16_t *mirror;
-	uint16_t synchronous;									/**< Synchronization list. */
-	uint16_t trigger;										/**< Synchronization flag. */
-} me1600_ao_shadow_t;
-
-typedef enum ME1600_AO_STATUS {
-	ao_status_none = 0,
-	ao_status_single_configured,
-	ao_status_single_run,
-	ao_status_single_end,
-	ao_status_last
-} ME1600_AO_STATUS;
-
-/**
- * @brief The ME-1600 analog output subdevice class.
- */
-typedef struct me1600_ao_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;									/**< The subdevice base class. */
-
-	/* Attributes */
-	int ao_idx;												/**< The index of the analog output subdevice on the device. */
-
-	spinlock_t subdevice_lock;								/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *config_regs_lock;							/**< Spin lock to protect configuration registers from concurrent access. */
-
-	int u_ranges_count;										/**< The number of voltage ranges available on this subdevice. */
-	me1600_ao_range_entry_t u_ranges[ME1600_MAX_RANGES];	/**< Array holding the voltage ranges on this subdevice. */
-	int i_ranges_count;										/**< The number of current ranges available on this subdevice. */
-	me1600_ao_range_entry_t i_ranges[ME1600_MAX_RANGES];	/**< Array holding the current ranges on this subdevice. */
-
-	/* Registers */
-	unsigned long uni_bi_reg;								/**< Register for switching between unipoar and bipolar output mode. */
-	unsigned long i_range_reg;								/**< Register for switching between ranges. */
-	unsigned long sim_output_reg;							/**< Register used in order to update all channels simultaneously. */
-	unsigned long current_on_reg;							/**< Register enabling current output on the fourth subdevice. */
-#   ifdef PDEBUG_REG
-	unsigned long reg_base;
-#   endif
-
-	ME1600_AO_STATUS status;
-	me1600_ao_shadow_t *ao_regs_shadows;					/**< Addresses and shadows of output's registers. */
-	spinlock_t *ao_shadows_lock;							/**< Protects the shadow's struct. */
-	int mode;												/**< Mode in witch output should works. */
-	wait_queue_head_t wait_queue;							/**< Wait queue to put on tasks waiting for data to arrive. */
-	me1600_ao_timeout_t timeout;							/**< The timeout for start in blocking and non-blocking mode. */
-	struct workqueue_struct *me1600_workqueue;
-	struct delayed_work ao_control_task;
-
-	volatile int ao_control_task_flag;						/**< Flag controling reexecuting of control task */
-} me1600_ao_subdevice_t;
-
-/**
- * @brief The constructor to generate a subdevice template instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param ao_idx The index of the analog output subdevice on the device.
- * @param current Flag indicating that analog output with #ao_idx of 3 is capable of current output.
- * @param config_regs_lock Pointer to spin lock protecting the configuration registers and from concurrent access.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me1600_ao_subdevice_t *me1600_ao_constructor(uint32_t reg_base,
-					     unsigned int ao_idx,
-					     int curr,
-					     spinlock_t * config_regs_lock,
-					     spinlock_t * ao_shadows_lock,
-					     me1600_ao_shadow_t *
-					     ao_regs_shadows,
-					     struct workqueue_struct
-					     *me1600_wq);
-
-# endif	//__KERNEL__
-#endif //_ME1600_AO_H_
diff --git a/drivers/staging/meilhaus/me1600_ao_reg.h b/drivers/staging/meilhaus/me1600_ao_reg.h
deleted file mode 100644
index 31e7800..0000000
--- a/drivers/staging/meilhaus/me1600_ao_reg.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/**
- * @file me1600_ao_reg.h
- *
- * @brief ME-1600 analog output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME1600_AO_REG_H_
-#define _ME1600_AO_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME1600_CHANNEL_0_REG    0x00	/**< Register to set a digital value on channel 0. */
-#define ME1600_CHANNEL_1_REG    0x02	/**< Register to set a digital value on channel 1. */
-#define ME1600_CHANNEL_2_REG    0x04	/**< Register to set a digital value on channel 2. */
-#define ME1600_CHANNEL_3_REG    0x06	/**< Register to set a digital value on channel 3. */
-#define ME1600_CHANNEL_4_REG    0x08	/**< Register to set a digital value on channel 4. */
-#define ME1600_CHANNEL_5_REG    0x0A	/**< Register to set a digital value on channel 5. */
-#define ME1600_CHANNEL_6_REG    0x0C	/**< Register to set a digital value on channel 6. */
-#define ME1600_CHANNEL_7_REG    0x0E	/**< Register to set a digital value on channel 7. */
-#define ME1600_CHANNEL_8_REG    0x10	/**< Register to set a digital value on channel 8. */
-#define ME1600_CHANNEL_9_REG    0x12	/**< Register to set a digital value on channel 9. */
-#define ME1600_CHANNEL_10_REG   0x14	/**< Register to set a digital value on channel 10. */
-#define ME1600_CHANNEL_11_REG   0x16	/**< Register to set a digital value on channel 11. */
-#define ME1600_CHANNEL_12_REG   0x18	/**< Register to set a digital value on channel 12. */
-#define ME1600_CHANNEL_13_REG   0x1A	/**< Register to set a digital value on channel 13. */
-#define ME1600_CHANNEL_14_REG   0x1C	/**< Register to set a digital value on channel 14. */
-#define ME1600_CHANNEL_15_REG   0x1E	/**< Register to set a digital value on channel 15. */
-
-/* Every channel one bit: bipolar = 0, unipolar = 1 */
-#define ME1600_UNI_BI_REG		0x20	/**< Register to switch between unipolar and bipolar. */
-
-/* Every channel one bit (only lower 8 Bits): 0..20mA = 0, 4..20mA = 1 */
-#define ME1600_020_420_REG		0x22	/**< Register to switch between the two current ranges. */
-
-/* If a bit is set, the corresponding DAC (4 ports each) is
-   not set at the moment you write to an output of it.
-   Clearing the bit updates the port. */
-#define ME1600_SIM_OUTPUT_REG	0x24	/**< Register to update all channels of a subdevice simultaneously. */
-
-/* Current on/off (only lower 8 bits): off = 0, on  = 1 */
-#define ME1600_CURRENT_ON_REG	0x26	/**< Register to swicht between voltage and current output. */
-
-#define ME1600_AO_MAX_DATA		0x0FFF	/**< The maximum digital data accepted by an analog output channel. */
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me1600_device.c b/drivers/staging/meilhaus/me1600_device.c
deleted file mode 100644
index c244e98..0000000
--- a/drivers/staging/meilhaus/me1600_device.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/**
- * @file me1600_device.c
- *
- * @brief ME-1600 device class implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-#include "medevice.h"
-#include "mesubdevice.h"
-#include "me1600_device.h"
-
-static void me1600_set_registry(me1600_device_t *subdevice, uint32_t reg_base);
-static void me1600_destructor(struct me_device *device);
-
-/**
- * @brief Global variable.
- * This is working queue for runing a separate atask that will be responsible for work status (start, stop, timeouts).
- */
-static struct workqueue_struct *me1600_workqueue;
-
-me_device_t *me1600_pci_constructor(struct pci_dev *pci_device)
-{
-	int err;
-	me1600_device_t *me1600_device;
-	me_subdevice_t *subdevice;
-	unsigned int chip_idx;
-	int i;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me1600_device = kmalloc(sizeof(me1600_device_t), GFP_KERNEL);
-
-	if (!me1600_device) {
-		PERROR("Cannot get memory for device instance.\n");
-		return NULL;
-	}
-
-	memset(me1600_device, 0, sizeof(me1600_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me1600_device, pci_device);
-
-	if (err) {
-		kfree(me1600_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-	// Initialize spin lock .
-	spin_lock_init(&me1600_device->config_regs_lock);
-	spin_lock_init(&me1600_device->ao_shadows_lock);
-
-	// Get the number of analog output subdevices.
-	chip_idx =
-	    me1600_versions_get_device_index(me1600_device->base.info.pci.
-					     device_id);
-
-	// Create shadow instance.
-	me1600_device->ao_regs_shadows.count =
-	    me1600_versions[chip_idx].ao_chips;
-	me1600_device->ao_regs_shadows.registry =
-	    kmalloc(me1600_versions[chip_idx].ao_chips * sizeof(unsigned long),
-		    GFP_KERNEL);
-	me1600_set_registry(me1600_device,
-			    me1600_device->base.info.pci.reg_bases[2]);
-	me1600_device->ao_regs_shadows.shadow =
-	    kmalloc(me1600_versions[chip_idx].ao_chips * sizeof(uint16_t),
-		    GFP_KERNEL);
-	me1600_device->ao_regs_shadows.mirror =
-	    kmalloc(me1600_versions[chip_idx].ao_chips * sizeof(uint16_t),
-		    GFP_KERNEL);
-
-	// Create subdevice instances.
-	for (i = 0; i < me1600_versions[chip_idx].ao_chips; i++) {
-		subdevice =
-		    (me_subdevice_t *) me1600_ao_constructor(me1600_device->
-							     base.info.pci.
-							     reg_bases[2], i,
-							     ((me1600_versions
-							       [chip_idx].curr >
-							       i) ? 1 : 0),
-							     &me1600_device->
-							     config_regs_lock,
-							     &me1600_device->
-							     ao_shadows_lock,
-							     &me1600_device->
-							     ao_regs_shadows,
-							     me1600_workqueue);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me1600_device);
-			kfree(me1600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me1600_device->base.slist,
-					    subdevice);
-	}
-
-	// Overwrite base class methods.
-	me1600_device->base.me_device_destructor = me1600_destructor;
-
-	return (me_device_t *) me1600_device;
-}
-EXPORT_SYMBOL(me1600_pci_constructor);
-
-static void me1600_destructor(struct me_device *device)
-{
-	me1600_device_t *me1600_device = (me1600_device_t *) device;
-	PDEBUG("executed.\n");
-
-	// Destroy shadow instance.
-	kfree(me1600_device->ao_regs_shadows.registry);
-	kfree(me1600_device->ao_regs_shadows.shadow);
-	kfree(me1600_device->ao_regs_shadows.mirror);
-
-	me_device_deinit((me_device_t *) me1600_device);
-	kfree(me1600_device);
-}
-
-static void me1600_set_registry(me1600_device_t *subdevice, uint32_t reg_base)
-{				// Create shadow structure.
-	if (subdevice->ao_regs_shadows.count >= 1) {
-		subdevice->ao_regs_shadows.registry[0] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_0_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 2) {
-		subdevice->ao_regs_shadows.registry[1] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_1_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 3) {
-		subdevice->ao_regs_shadows.registry[2] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_2_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 4) {
-		subdevice->ao_regs_shadows.registry[3] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_3_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 5) {
-		subdevice->ao_regs_shadows.registry[4] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_4_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 6) {
-		subdevice->ao_regs_shadows.registry[5] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_5_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 7) {
-		subdevice->ao_regs_shadows.registry[6] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_6_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 8) {
-		subdevice->ao_regs_shadows.registry[7] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_7_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 9) {
-		subdevice->ao_regs_shadows.registry[8] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_8_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 10) {
-		subdevice->ao_regs_shadows.registry[9] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_9_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 11) {
-		subdevice->ao_regs_shadows.registry[10] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_10_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 12) {
-		subdevice->ao_regs_shadows.registry[11] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_11_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 13) {
-		subdevice->ao_regs_shadows.registry[12] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_12_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 14) {
-		subdevice->ao_regs_shadows.registry[13] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_13_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 15) {
-		subdevice->ao_regs_shadows.registry[14] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_14_REG);
-	}
-	if (subdevice->ao_regs_shadows.count >= 16) {
-		subdevice->ao_regs_shadows.registry[15] =
-		    (unsigned long)(reg_base + ME1600_CHANNEL_15_REG);
-	}
-	if (subdevice->ao_regs_shadows.count > 16) {
-		PERROR("More than 16 outputs! (%d)\n",
-		       subdevice->ao_regs_shadows.count);
-	}
-}
-
-// Init and exit of module.
-
-static int __init me1600_init(void)
-{
-	PDEBUG("executed\n.");
-
-	me1600_workqueue = create_singlethread_workqueue("me1600");
-	return 0;
-}
-
-static void __exit me1600_exit(void)
-{
-	PDEBUG("executed\n.");
-
-	flush_workqueue(me1600_workqueue);
-	destroy_workqueue(me1600_workqueue);
-}
-
-module_init(me1600_init);
-module_exit(me1600_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR
-    ("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx> & Krzysztof Gantzke <k.gantzke@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for ME-1600 Device");
-MODULE_SUPPORTED_DEVICE("Meilhaus ME-1600 Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me1600_device.h b/drivers/staging/meilhaus/me1600_device.h
deleted file mode 100644
index c73aca1..0000000
--- a/drivers/staging/meilhaus/me1600_device.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/**
- * @file me1600_device.h
- *
- * @brief ME-1600 device class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME1600_H
-#define _ME1600_H
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-#include "me1600_ao.h"
-#include "me1600_ao_reg.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure to store device capabilities.
- */
-typedef struct me1600_version {
-	uint16_t device_id;				/**< The PCI device id of the device. */
-	unsigned int ao_chips;			/**< The number of analog outputs on the device. */
-	int curr;						/**< Flag to identify amounts of current output. */
-} me1600_version_t;
-
-/**
-  * @brief Defines for each ME-1600 device version its capabilities.
- */
-static me1600_version_t me1600_versions[] = {
-	{PCI_DEVICE_ID_MEILHAUS_ME1600_4U, 4, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME1600_8U, 8, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME1600_12U, 12, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME1600_16U, 16, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME1600_16U_8I, 16, 8},
-	{0}
-};
-
-/**< Returns the number of entries in #me1600_versions. */
-#define ME1600_DEVICE_VERSIONS (ARRAY_SIZE(me1600_versions) - 1)
-
-/**
- * @brief Returns the index of the device entry in #me1600_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #me1600_versions.
- */
-static inline unsigned int me1600_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < ME1600_DEVICE_VERSIONS; i++)
-		if (me1600_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-/**
- * @brief The ME-1600 device class structure.
- */
-typedef struct me1600_device {
-	me_device_t base;						/**< The Meilhaus device base class. */
-	spinlock_t config_regs_lock;			/**< Protects the configuration registers. */
-
-	me1600_ao_shadow_t ao_regs_shadows;		/**< Addresses and shadows of output's registers. */
-	spinlock_t ao_shadows_lock;				/**< Protects the shadow's struct. */
-} me1600_device_t;
-
-/**
- * @brief The ME-1600 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-1600 device instance. \n
- *         NULL on error.
- */
-me_device_t *me1600_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_ai.c b/drivers/staging/meilhaus/me4600_ai.c
deleted file mode 100644
index fd9daa9..0000000
--- a/drivers/staging/meilhaus/me4600_ai.c
+++ /dev/null
@@ -1,3405 +0,0 @@
-/**
- * @file me4600_ai.c
- *
- * @brief ME-4000 analog input subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-# define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-#include "medebug.h"
-#include "meids.h"
-
-#include "me4600_reg.h"
-#include "me4600_ai_reg.h"
-#include "me4600_ai.h"
-
-/*
- * Declarations (local)
- */
-
-static void me4600_ai_destructor(struct me_subdevice *subdevice);
-static int me4600_ai_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags);
-
-static int me4600_ai_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags);
-
-static int me4600_ai_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags);
-
-static int me4600_ai_io_stream_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      meIOStreamConfig_t *config_list,
-				      int count,
-				      meIOStreamTrigger_t *trigger,
-				      int fifo_irq_threshold, int flags);
-static int me4600_ai_io_stream_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int read_mode,
-				    int *values, int *count, int flags);
-static int me4600_ai_io_stream_new_values(me_subdevice_t *subdevice,
-					  struct file *filep,
-					  int time_out, int *count, int flags);
-static inline int me4600_ai_io_stream_read_get_value(me4600_ai_subdevice_t *
-						     instance, int *values,
-						     const int count,
-						     const int flags);
-
-static int me4600_ai_io_stream_start(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int start_mode, int time_out, int flags);
-static int me4600_ai_io_stream_stop(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int stop_mode, int flags);
-static int me4600_ai_io_stream_status(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int wait,
-				      int *status, int *values, int flags);
-
-static int me4600_ai_query_range_by_min_max(me_subdevice_t *subdevice,
-					    int unit,
-					    int *min,
-					    int *max, int *maxdata, int *range);
-static int me4600_ai_query_number_ranges(me_subdevice_t *subdevice,
-					 int unit, int *count);
-static int me4600_ai_query_range_info(me_subdevice_t *subdevice,
-				      int range,
-				      int *unit,
-				      int *min, int *max, int *maxdata);
-static int me4600_ai_query_timer(me_subdevice_t *subdevice,
-				 int timer,
-				 int *base_frequency,
-				 long long *min_ticks, long long *max_ticks);
-static int me4600_ai_query_number_channels(me_subdevice_t *subdevice,
-					   int *number);
-static int me4600_ai_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype);
-static int me4600_ai_query_subdevice_caps(me_subdevice_t *subdevice,
-					  int *caps);
-static int me4600_ai_query_subdevice_caps_args(struct me_subdevice *subdevice,
-					       int cap, int *args, int count);
-
-static irqreturn_t me4600_ai_isr(int irq, void *dev_id);
-
-static int ai_mux_toggler(me4600_ai_subdevice_t *subdevice);
-
-/** Immidiate stop.
-* Reset all IRQ's sources. (block laches)
-* Preserve FIFO
-*/
-static int ai_stop_immediately(me4600_ai_subdevice_t *instance);
-
-/** Immidiate stop.
-* Reset all IRQ's sources. (block laches)
-* Reset data FIFO
-*/
-inline void ai_stop_isr(me4600_ai_subdevice_t *instance);
-
-/** Interrupt logics.
-* Read datas
-* Reset latches
-*/
-void ai_limited_isr(me4600_ai_subdevice_t *instance, const uint32_t irq_status,
-		    const uint32_t ctrl_status);
-void ai_infinite_isr(me4600_ai_subdevice_t *instance,
-		     const uint32_t irq_status, const uint32_t ctrl_status);
-
-/** Last chunck of datas. We must reschedule sample counter.
-* Leaving SC_RELOAD doesn't do any harm, but in some bad case can make extra interrupts.
-* When threshold is wrongly set some IRQ are lost.(!!!)
-*/
-inline void ai_reschedule_SC(me4600_ai_subdevice_t *instance);
-
-/** Read datas from FIFO and copy them to buffer */
-static inline int ai_read_data(me4600_ai_subdevice_t *instance,
-			       const int count);
-
-/** Copy rest of data from fifo to circular buffer.*/
-static inline int ai_read_data_pooling(me4600_ai_subdevice_t *instance);
-
-/** Set ISM to next state for infinite data aqusation mode*/
-inline void ai_infinite_ISM(me4600_ai_subdevice_t *instance);
-
-/** Set ISM to next state for define amount of data aqusation mode*/
-inline void ai_limited_ISM(me4600_ai_subdevice_t *instance,
-			   uint32_t irq_status);
-
-/** Set ISM to next stage for limited mode */
-inline void ai_data_acquisition_logic(me4600_ai_subdevice_t *instance);
-
-static void me4600_ai_work_control_task(struct work_struct *work);
-
-/* Definitions
- */
-
-me4600_ai_subdevice_t *me4600_ai_constructor(uint32_t reg_base,
-					     unsigned int channels,
-					     unsigned int ranges,
-					     int isolated,
-					     int sh,
-					     int irq,
-					     spinlock_t *ctrl_reg_lock,
-					     struct workqueue_struct *me4600_wq)
-{
-	me4600_ai_subdevice_t *subdevice;
-	int err;
-	unsigned int i;
-
-	PDEBUG("executed. idx=0\n");
-
-	// Allocate memory for subdevice instance.
-	subdevice = kmalloc(sizeof(me4600_ai_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me4600_ai_subdevice_t));
-
-	// Initialize subdevice base class.
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	// Initialize circular buffer.
-	subdevice->circ_buf.mask = ME4600_AI_CIRC_BUF_COUNT - 1;
-
-	subdevice->circ_buf.buf =
-	    (void *)__get_free_pages(GFP_KERNEL, ME4600_AI_CIRC_BUF_SIZE_ORDER);
-	PDEBUG("circ_buf = %p size=%ld\n", subdevice->circ_buf.buf,
-	       ME4600_AI_CIRC_BUF_SIZE);
-
-	if (!subdevice->circ_buf.buf) {
-		PERROR("Cannot get circular buffer.\n");
-		me_subdevice_deinit((me_subdevice_t *) subdevice);
-		kfree(subdevice);
-		return NULL;
-	}
-
-	memset(subdevice->circ_buf.buf, 0, ME4600_AI_CIRC_BUF_SIZE);
-	subdevice->circ_buf.head = 0;
-	subdevice->circ_buf.tail = 0;
-	subdevice->status = ai_status_none;
-
-	// Initialize wait queue.
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	// Save the number of channels.
-	subdevice->channels = channels;
-
-	/* Initialize the single config entries to reset values */
-	for (i = 0; i < channels; i++) {
-		subdevice->single_config[i].status = ME_SINGLE_CHANNEL_NOT_CONFIGURED;	//not configured
-	}
-
-	// Save if isolated device.
-	subdevice->isolated = isolated;
-
-	// Save if sample and hold is available.
-	subdevice->sh = sh;
-
-	// Set stream config to not configured state.
-	subdevice->fifo_irq_threshold = 0;
-	subdevice->data_required = 0;
-	subdevice->chan_list_len = 0;
-
-	// Initialize registers addresses.
-	subdevice->ctrl_reg = reg_base + ME4600_AI_CTRL_REG;
-	subdevice->status_reg = reg_base + ME4600_AI_STATUS_REG;
-	subdevice->channel_list_reg = reg_base + ME4600_AI_CHANNEL_LIST_REG;
-	subdevice->data_reg = reg_base + ME4600_AI_DATA_REG;
-	subdevice->chan_timer_reg = reg_base + ME4600_AI_CHAN_TIMER_REG;
-	subdevice->chan_pre_timer_reg = reg_base + ME4600_AI_CHAN_PRE_TIMER_REG;
-	subdevice->scan_timer_low_reg = reg_base + ME4600_AI_SCAN_TIMER_LOW_REG;
-	subdevice->scan_timer_high_reg =
-	    reg_base + ME4600_AI_SCAN_TIMER_HIGH_REG;
-	subdevice->scan_pre_timer_low_reg =
-	    reg_base + ME4600_AI_SCAN_PRE_TIMER_LOW_REG;
-	subdevice->scan_pre_timer_high_reg =
-	    reg_base + ME4600_AI_SCAN_PRE_TIMER_HIGH_REG;
-	subdevice->start_reg = reg_base + ME4600_AI_START_REG;
-	subdevice->irq_status_reg = reg_base + ME4600_IRQ_STATUS_REG;
-	subdevice->sample_counter_reg = reg_base + ME4600_AI_SAMPLE_COUNTER_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	// Initialize ranges.
-	subdevice->ranges_len = ranges;
-	subdevice->ranges[0].min = -10E6;
-	subdevice->ranges[0].max = 9999694;
-
-	subdevice->ranges[1].min = 0;
-	subdevice->ranges[1].max = 9999847;
-
-	subdevice->ranges[2].min = -25E5;
-	subdevice->ranges[2].max = 2499923;
-
-	subdevice->ranges[3].min = 0;
-	subdevice->ranges[3].max = 2499961;
-
-	// We have to switch the mux in order to get it work correctly.
-	ai_mux_toggler(subdevice);
-
-	// Register interrupt service routine.
-	subdevice->irq = irq;
-	if (request_irq(subdevice->irq, me4600_ai_isr,
-			IRQF_DISABLED | IRQF_SHARED,
-			ME4600_NAME, subdevice)) {
-		PERROR("Cannot register interrupt service routine.\n");
-		me_subdevice_deinit((me_subdevice_t *) subdevice);
-		free_pages((unsigned long)subdevice->circ_buf.buf,
-			   ME4600_AI_CIRC_BUF_SIZE_ORDER);
-		subdevice->circ_buf.buf = NULL;
-		kfree(subdevice);
-		return NULL;
-	}
-	PINFO("Registered irq=%d.\n", subdevice->irq);
-
-	// Override base class methods.
-	subdevice->base.me_subdevice_destructor = me4600_ai_destructor;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me4600_ai_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me4600_ai_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me4600_ai_io_single_read;
-	subdevice->base.me_subdevice_io_stream_config =
-	    me4600_ai_io_stream_config;
-	subdevice->base.me_subdevice_io_stream_new_values =
-	    me4600_ai_io_stream_new_values;
-	subdevice->base.me_subdevice_io_stream_read = me4600_ai_io_stream_read;
-	subdevice->base.me_subdevice_io_stream_start =
-	    me4600_ai_io_stream_start;
-	subdevice->base.me_subdevice_io_stream_status =
-	    me4600_ai_io_stream_status;
-	subdevice->base.me_subdevice_io_stream_stop = me4600_ai_io_stream_stop;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me4600_ai_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me4600_ai_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me4600_ai_query_subdevice_caps;
-	subdevice->base.me_subdevice_query_subdevice_caps_args =
-	    me4600_ai_query_subdevice_caps_args;
-	subdevice->base.me_subdevice_query_range_by_min_max =
-	    me4600_ai_query_range_by_min_max;
-	subdevice->base.me_subdevice_query_number_ranges =
-	    me4600_ai_query_number_ranges;
-	subdevice->base.me_subdevice_query_range_info =
-	    me4600_ai_query_range_info;
-	subdevice->base.me_subdevice_query_timer = me4600_ai_query_timer;
-
-	// Prepare work queue.
-	subdevice->me4600_workqueue = me4600_wq;
-
-/* workqueue API changed in kernel 2.6.20 */
-	INIT_DELAYED_WORK(&subdevice->ai_control_task,
-			  me4600_ai_work_control_task);
-
-	return subdevice;
-}
-
-static void me4600_ai_destructor(struct me_subdevice *subdevice)
-{
-	me4600_ai_subdevice_t *instance;
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance->ai_control_task_flag = 0;
-	// Reset subdevice to asure clean exit.
-	me4600_ai_io_reset_subdevice(subdevice, NULL,
-				     ME_IO_RESET_SUBDEVICE_NO_FLAGS);
-
-	// Remove any tasks from work queue. This is paranoic because it was done allready in reset().
-	if (!cancel_delayed_work(&instance->ai_control_task)) {	//Wait 2 ticks to be sure that control task is removed from queue.
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(2);
-	}
-
-	free_irq(instance->irq, instance);
-	free_pages((unsigned long)instance->circ_buf.buf,
-		   ME4600_AI_CIRC_BUF_SIZE_ORDER);
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-static int me4600_ai_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags)
-{
-	me4600_ai_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	volatile uint32_t ctrl;
-	unsigned long status;
-	const int timeout = HZ / 10;	//100ms
-	int i;
-
-	PDEBUG("executed. idx=0\n");
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	instance->ai_control_task_flag = 0;
-	instance->status = ai_status_none;
-
-	for (i = 0; i <= timeout; i++) {
-		spin_lock_irqsave(instance->ctrl_reg_lock, status);
-		ctrl = inl(instance->ctrl_reg);
-		//Stop DMA
-		ctrl &= ~ME4600_AI_CTRL_RPCI_FIFO;
-		// Stop all actions. No conditions!
-		ctrl &= ~ME4600_AI_CTRL_BIT_STOP;
-		ctrl |= ME4600_AI_CTRL_BIT_IMMEDIATE_STOP;
-
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-		spin_unlock_irqrestore(instance->ctrl_reg_lock, status);
-
-		if (!(inl(instance->status_reg) & ME4600_AI_STATUS_BIT_FSM))
-			break;
-
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(1);
-	}
-
-	if (i > timeout) {
-		PERROR("FSM is still busy.\n");
-		ME_SUBDEVICE_EXIT;
-		return ME_ERRNO_INTERNAL;
-	}
-
-	spin_lock_irqsave(instance->ctrl_reg_lock, status);
-	ctrl = inl(instance->ctrl_reg);
-	// Clear all features. Dissable interrupts.
-	ctrl &= ~(ME4600_AI_CTRL_BIT_STOP
-		  | ME4600_AI_CTRL_BIT_LE_IRQ
-		  | ME4600_AI_CTRL_BIT_HF_IRQ | ME4600_AI_CTRL_BIT_SC_IRQ);
-	ctrl |= (ME4600_AI_CTRL_BIT_IMMEDIATE_STOP
-		 | ME4600_AI_CTRL_BIT_LE_IRQ_RESET
-		 | ME4600_AI_CTRL_BIT_HF_IRQ_RESET
-		 | ME4600_AI_CTRL_BIT_SC_IRQ_RESET);
-
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock_irqrestore(instance->ctrl_reg_lock, status);
-
-	outl(ME4600_AI_MIN_CHAN_TICKS - 1, instance->chan_timer_reg);
-	PDEBUG_REG("chan_timer_reg outl(0x%lX+0x%lX)=0x%llx\n",
-		   instance->reg_base,
-		   instance->chan_timer_reg - instance->reg_base,
-		   ME4600_AI_MIN_CHAN_TICKS);
-	outl(ME4600_AI_MIN_ACQ_TICKS - 1, instance->chan_pre_timer_reg);
-	PDEBUG_REG("chan_pre_timer_reg outl(0x%lX+0x%lX)=0x%llx\n",
-		   instance->reg_base,
-		   instance->chan_pre_timer_reg - instance->reg_base,
-		   ME4600_AI_MIN_ACQ_TICKS);
-	outl(0, instance->scan_timer_low_reg);
-	PDEBUG_REG("scan_timer_low_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_timer_low_reg - instance->reg_base, 0);
-	outl(0, instance->scan_timer_high_reg);
-	PDEBUG_REG("scan_timer_high_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_timer_high_reg - instance->reg_base, 0);
-	outl(0, instance->scan_pre_timer_low_reg);
-	PDEBUG_REG("scan_pre_timer_low_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_pre_timer_low_reg - instance->reg_base, 0);
-	outl(0, instance->scan_pre_timer_high_reg);
-	PDEBUG_REG("scan_pre_timer_high_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_pre_timer_high_reg - instance->reg_base, 0);
-	outl(0xEFFFFFFF, instance->sample_counter_reg);
-	PDEBUG_REG("sample_counter_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->sample_counter_reg - instance->reg_base,
-		   0xEFFFFFFF);
-
-	instance->circ_buf.head = 0;
-	instance->circ_buf.tail = 0;
-
-	instance->fifo_irq_threshold = 0;
-	instance->data_required = 0;
-	instance->chan_list_len = 0;
-
-	// Initialize the single config entries to reset values.
-	for (i = 0; i < instance->channels; i++) {
-		instance->single_config[i].status =
-		    ME_SINGLE_CHANNEL_NOT_CONFIGURED;
-	}
-	instance->status = ai_status_none;
-
-	//Signal reset if user is on wait.
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ai_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me4600_ai_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags;
-	int i;
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=0\n");
-
-	if (flags & ~ME_IO_SINGLE_CONFIG_CONTINUE) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	switch (trig_type) {
-	case ME_TRIG_TYPE_SW:
-		if (trig_edge != ME_TRIG_EDGE_NONE) {
-			PERROR
-			    ("Invalid trigger edge. Software trigger has not edge.\n");
-			return ME_ERRNO_INVALID_TRIG_EDGE;
-		}
-		break;
-
-	case ME_TRIG_TYPE_EXT_ANALOG:
-		if (instance->channels <= 16)	//Only versions with 32 channels have analog trigger (4670 and 4680)
-		{
-			PERROR("Invalid trigger type specified.\n");
-			return ME_ERRNO_INVALID_TRIG_TYPE;
-		}
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-		if ((trig_edge != ME_TRIG_EDGE_ANY)
-		    && (trig_edge != ME_TRIG_EDGE_RISING)
-		    && (trig_edge != ME_TRIG_EDGE_FALLING)) {
-			PERROR("Invalid trigger edge specified.\n");
-			return ME_ERRNO_INVALID_TRIG_EDGE;
-		}
-		break;
-
-	default:
-		PERROR("Invalid trigger type specified.\n");
-		return ME_ERRNO_INVALID_TRIG_TYPE;
-	}
-
-	if (trig_chan != ME_TRIG_CHAN_DEFAULT) {
-		PERROR("Invalid trigger channel specified.\n");
-		return ME_ERRNO_INVALID_TRIG_CHAN;
-	}
-
-	if ((single_config < 0) || (single_config >= instance->ranges_len)) {
-		PERROR("Invalid single config specified.\n");
-		return ME_ERRNO_INVALID_SINGLE_CONFIG;
-	}
-
-	if ((ref != ME_REF_AI_GROUND) && (ref != ME_REF_AI_DIFFERENTIAL)) {
-		PERROR("Invalid analog reference specified.\n");
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	if ((single_config % 2) && (ref != ME_REF_AI_GROUND)) {
-		PERROR("Invalid analog reference specified.\n");
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	if ((ref == ME_REF_AI_DIFFERENTIAL)
-	    && ((instance->channels == 16) || (channel >= 16))) {
-		PERROR("Invalid analog reference specified.\n");
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	if (channel < 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (channel >= instance->channels) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	//Prepare data entry.
-	// Common for all modes.
-	instance->single_config[channel].entry =
-	    channel | ME4600_AI_LIST_LAST_ENTRY;
-
-	if (ref == ME_REF_AI_DIFFERENTIAL) {	// ME_REF_AI_DIFFERENTIAL
-		instance->single_config[channel].entry |=
-		    ME4600_AI_LIST_INPUT_DIFFERENTIAL;
-	}
-/*
-		// ME4600_AI_LIST_INPUT_SINGLE_ENDED = 0x0000
-		// 'entry |= ME4600_AI_LIST_INPUT_SINGLE_ENDED' <== Do nothing. Removed.
-		else
-		{// ME_REF_AI_GROUND
-			instance->single_config[channel].entry |= ME4600_AI_LIST_INPUT_SINGLE_ENDED;
-		}
-*/
-	switch (single_config) {
-	case 0:		//-10V..10V
-/*
-					// ME4600_AI_LIST_RANGE_BIPOLAR_10 = 0x0000
-					// 'entry |= ME4600_AI_LIST_RANGE_BIPOLAR_10' <== Do nothing. Removed.
-					instance->single_config[channel].entry |= ME4600_AI_LIST_RANGE_BIPOLAR_10;
-*/ break;
-
-	case 1:		//0V..10V
-		instance->single_config[channel].entry |=
-		    ME4600_AI_LIST_RANGE_UNIPOLAR_10;
-		break;
-
-	case 2:		//-2.5V..2.5V
-		instance->single_config[channel].entry |=
-		    ME4600_AI_LIST_RANGE_BIPOLAR_2_5;
-		break;
-
-	case 3:		//0V..2.5V
-		instance->single_config[channel].entry |=
-		    ME4600_AI_LIST_RANGE_UNIPOLAR_2_5;
-		break;
-	}
-
-	// Prepare control register.
-	// Common for all modes.
-	instance->single_config[channel].ctrl =
-	    ME4600_AI_CTRL_BIT_CHANNEL_FIFO | ME4600_AI_CTRL_BIT_DATA_FIFO;
-
-	switch (trig_type) {
-	case ME_TRIG_TYPE_SW:
-		// Nothing to set.
-		break;
-
-	case ME_TRIG_TYPE_EXT_ANALOG:
-		instance->single_config[channel].ctrl |=
-		    ME4600_AI_CTRL_BIT_EX_TRIG_ANALOG;
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-		instance->single_config[channel].ctrl |=
-		    ME4600_AI_CTRL_BIT_EX_TRIG;
-		break;
-	}
-
-	switch (trig_edge) {
-	case ME_TRIG_EDGE_RISING:
-		// Nothing to set.
-		break;
-
-	case ME_TRIG_EDGE_ANY:
-		instance->single_config[channel].ctrl |=
-		    ME4600_AI_CTRL_BIT_EX_TRIG_BOTH;
-
-	case ME_TRIG_EDGE_FALLING:
-		instance->single_config[channel].ctrl |=
-		    ME4600_AI_CTRL_BIT_EX_TRIG_FALLING;
-		break;
-	}
-
-	// Enable this channel
-	instance->single_config[channel].status = ME_SINGLE_CHANNEL_CONFIGURED;
-
-	// Copy this settings to other outputs.
-	if (flags == ME_IO_SINGLE_CONFIG_CONTINUE) {
-		for (i = channel + 1; i < instance->channels; i++) {
-			instance->single_config[i].ctrl =
-			    instance->single_config[channel].ctrl;
-			instance->single_config[i].entry =
-			    instance->single_config[channel].entry;
-			instance->single_config[i].status =
-			    ME_SINGLE_CHANNEL_CONFIGURED;
-		}
-	}
-
-	instance->status = ai_status_single_configured;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ai_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me4600_ai_subdevice_t *instance;
-	volatile uint32_t tmp;
-	volatile uint32_t val;
-	unsigned long cpu_flags;
-	int err = ME_ERRNO_SUCCESS;
-
-	unsigned long j;
-	unsigned long delay = 0;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (instance->status != ai_status_single_configured) {
-		PERROR("Subdevice not configured to work in single mode!\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	if ((channel > instance->channels) || (channel < 0)) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (instance->single_config[channel].status !=
-	    ME_SINGLE_CHANNEL_CONFIGURED) {
-		PERROR("Channel is not configured to work in single mode!\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	if (inl(instance->status_reg) & ME4600_AI_STATUS_BIT_FSM) {
-		PERROR("Subdevice is busy.\n");
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	// Cancel control task
-	PDEBUG("Cancel control task.\n");
-	instance->ai_control_task_flag = 0;
-	cancel_delayed_work(&instance->ai_control_task);
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-
-		if (delay == 0)
-			delay = 1;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	// Mark that StreamConfig is removed.
-	instance->chan_list_len = 0;
-
-	spin_lock(instance->ctrl_reg_lock);
-	/// @note Imprtant: Preserve EXT IRQ settings.
-	tmp = inl(instance->ctrl_reg);
-	// Clear FIFOs and dissable interrupts
-	tmp &=
-	    ~(ME4600_AI_CTRL_BIT_CHANNEL_FIFO | ME4600_AI_CTRL_BIT_DATA_FIFO);
-
-	tmp &=
-	    ~(ME4600_AI_CTRL_BIT_SC_IRQ | ME4600_AI_CTRL_BIT_HF_IRQ |
-	      ME4600_AI_CTRL_BIT_LE_IRQ);
-	tmp |=
-	    ME4600_AI_CTRL_BIT_SC_IRQ_RESET | ME4600_AI_CTRL_BIT_HF_IRQ_RESET |
-	    ME4600_AI_CTRL_BIT_LE_IRQ_RESET;
-
-	tmp |= ME4600_AI_CTRL_BIT_IMMEDIATE_STOP;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	outl(0, instance->scan_pre_timer_low_reg);
-	PDEBUG_REG("scan_pre_timer_low_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_pre_timer_low_reg - instance->reg_base, 0);
-	outl(0, instance->scan_pre_timer_high_reg);
-	PDEBUG_REG("scan_pre_timer_high_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_pre_timer_high_reg - instance->reg_base, 0);
-	outl(0, instance->scan_timer_low_reg);
-	PDEBUG_REG("scan_timer_low_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_timer_low_reg - instance->reg_base, 0);
-	outl(0, instance->scan_timer_high_reg);
-	PDEBUG_REG("scan_timer_high_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_timer_high_reg - instance->reg_base, 0);
-	outl(65, instance->chan_timer_reg);
-	PDEBUG_REG("chan_timer_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->chan_timer_reg - instance->reg_base, 65);
-	outl(65, instance->chan_pre_timer_reg);
-	PDEBUG_REG("chan_pre_timer_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->chan_pre_timer_reg - instance->reg_base, 65);
-
-	//Reactive FIFOs. Enable work.
-	tmp |= ME4600_AI_CTRL_BIT_CHANNEL_FIFO | ME4600_AI_CTRL_BIT_DATA_FIFO;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	outl(instance->single_config[channel].entry,
-	     instance->channel_list_reg);
-	PDEBUG_REG("channel_list_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->channel_list_reg - instance->reg_base,
-		   instance->single_config[channel].entry);
-
-	// Preserve EXT IRQ settings.
-	tmp &= (ME4600_AI_CTRL_BIT_EX_IRQ | ME4600_AI_CTRL_BIT_EX_IRQ_RESET);
-	outl(instance->single_config[channel].ctrl | tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base,
-		   instance->single_config[channel].ctrl | tmp);
-
-	spin_unlock(instance->ctrl_reg_lock);
-
-	if (!(instance->single_config[channel].ctrl & ME4600_AI_CTRL_BIT_EX_TRIG)) {	// Software start
-		inl(instance->start_reg);
-		PDEBUG_REG("start_reg inl(0x%lX+0x%lX)\n", instance->reg_base,
-			   instance->start_reg - instance->reg_base);
-
-		delay = 2;
-	}
-
-	j = jiffies;
-
-	while (!(inl(instance->status_reg) & ME4600_AI_STATUS_BIT_EF_DATA)) {
-		if (delay && ((jiffies - j) >= delay)) {
-			if (!(instance->single_config[channel].ctrl & ME4600_AI_CTRL_BIT_EX_TRIG)) {	// Software start.
-				PERROR("Value not available after wait.\n");
-				err = ME_ERRNO_INTERNAL;
-			} else {	// External start.
-				PERROR("Timeout reached.\n");
-				err = ME_ERRNO_TIMEOUT;
-			}
-			break;
-		}
-		// Wait
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(1);
-
-		if (signal_pending(current)) {
-			PERROR
-			    ("Wait on external trigger interrupted by signal.\n");
-			err = ME_ERRNO_SIGNAL;
-			break;
-		}
-
-		if (instance->status != ai_status_single_configured) {
-			PERROR("Wait interrupted by reset.\n");
-			err = ME_ERRNO_CANCELLED;
-			break;
-		}
-	}
-
-	// Read value.
-	if (!err) {
-		val = inl(instance->data_reg) ^ 0x8000;
-		PDEBUG_REG("data_reg inl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->data_reg - instance->reg_base, val);
-		*value = val & ME4600_AI_MAX_DATA;
-	} else {
-		*value = 0xFFFFFFFF;
-	}
-
-	// Restore settings.
-	spin_lock(instance->ctrl_reg_lock);
-	tmp = inl(instance->ctrl_reg);
-	// Clear FIFOs and dissable interrupts.
-	tmp &=
-	    ~(ME4600_AI_CTRL_BIT_CHANNEL_FIFO | ME4600_AI_CTRL_BIT_DATA_FIFO);
-	tmp |= ME4600_AI_CTRL_BIT_SC_IRQ | ME4600_AI_CTRL_BIT_HF_IRQ;
-	tmp |=
-	    ME4600_AI_CTRL_BIT_SC_IRQ_RESET | ME4600_AI_CTRL_BIT_HF_IRQ_RESET |
-	    ME4600_AI_CTRL_BIT_LE_IRQ_RESET | ME4600_AI_CTRL_BIT_IMMEDIATE_STOP;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ai_io_stream_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      meIOStreamConfig_t *config_list,
-				      int count,
-				      meIOStreamTrigger_t *trigger,
-				      int fifo_irq_threshold, int flags)
-{
-	me4600_ai_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	int i;			// internal multipurpose variable
-	unsigned long long data_required;
-
-	volatile uint32_t entry;
-	volatile uint32_t ctrl = ME4600_AI_CTRL_BIT_IMMEDIATE_STOP;
-	volatile uint32_t tmp;	// use when current copy of register's value needed
-	unsigned long cpu_flags;
-
-	uint64_t acq_ticks;
-	uint64_t scan_ticks;
-	uint64_t conv_ticks;
-	unsigned int acq_start_ticks_low = trigger->iAcqStartTicksLow;
-	unsigned int acq_start_ticks_high = trigger->iAcqStartTicksHigh;
-	unsigned int scan_start_ticks_low = trigger->iScanStartTicksLow;
-	unsigned int scan_start_ticks_high = trigger->iScanStartTicksHigh;
-	unsigned int conv_start_ticks_low = trigger->iConvStartTicksLow;
-	unsigned int conv_start_ticks_high = trigger->iConvStartTicksHigh;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER
-	    // Convert ticks to 64 bit long values
-	    acq_ticks =
-	    (uint64_t) acq_start_ticks_low +
-	    ((uint64_t) acq_start_ticks_high << 32);
-	scan_ticks =
-	    (uint64_t) scan_start_ticks_low +
-	    ((uint64_t) scan_start_ticks_high << 32);
-	conv_ticks =
-	    (uint64_t) conv_start_ticks_low +
-	    ((uint64_t) conv_start_ticks_high << 32);
-
-	// Check settings - begin
-	switch (trigger->iAcqStartTrigType) {
-	case ME_TRIG_TYPE_SW:
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-	case ME_TRIG_TYPE_EXT_ANALOG:
-		break;
-
-	default:
-		PERROR("Invalid acquisition start trigger type specified.\n");
-		err = ME_ERRNO_INVALID_ACQ_START_TRIG_TYPE;
-		goto ERROR;
-		break;
-	}
-
-	if ((trigger->iAcqStartTrigType == ME_TRIG_TYPE_SW)
-	    && (trigger->iAcqStartTrigEdge != ME_TRIG_EDGE_NONE)) {
-		PERROR("Invalid acquisition start trigger edge specified.\n");
-		err = ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE;
-		goto ERROR;
-	}
-
-	if (trigger->iAcqStartTrigType != ME_TRIG_TYPE_SW) {
-		switch (trigger->iAcqStartTrigEdge) {
-		case ME_TRIG_EDGE_RISING:
-		case ME_TRIG_EDGE_FALLING:
-		case ME_TRIG_EDGE_ANY:
-			break;
-
-		default:
-			PERROR
-			    ("Invalid acquisition start trigger edge specified.\n");
-			err = ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE;
-			goto ERROR;
-			break;
-		}
-	}
-
-	if (trigger->iAcqStartTrigChan != ME_TRIG_CHAN_DEFAULT) {
-		PERROR
-		    ("Invalid acquisition start trigger channel specified.\n");
-		err = ME_ERRNO_INVALID_ACQ_START_TRIG_CHAN;
-		goto ERROR;
-	}
-
-	if ((acq_ticks < ME4600_AI_MIN_ACQ_TICKS)
-	    || (acq_ticks > ME4600_AI_MAX_ACQ_TICKS)) {
-		PERROR
-		    ("Invalid acquisition start trigger argument specified.\n");
-		err = ME_ERRNO_INVALID_ACQ_START_ARG;
-		goto ERROR;
-	}
-
-	switch (trigger->iScanStartTrigType) {
-
-	case ME_TRIG_TYPE_TIMER:
-		if ((scan_ticks < ME4600_AI_MIN_SCAN_TICKS)
-		    || (scan_ticks > ME4600_AI_MAX_SCAN_TICKS)
-		    || (scan_ticks < count * conv_ticks)
-		    ) {
-			PERROR("Invalid scan start argument specified.\n");
-			err = ME_ERRNO_INVALID_SCAN_START_ARG;
-			goto ERROR;
-		}
-		break;
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-		if (trigger->iAcqStartTrigType != ME_TRIG_TYPE_EXT_DIGITAL) {
-			PERROR
-			    ("Invalid scan start trigger type specified (Acq is HW digital)\n");
-			err = ME_ERRNO_INVALID_SCAN_START_TRIG_TYPE;
-			goto ERROR;
-		}
-		break;
-
-	case ME_TRIG_TYPE_EXT_ANALOG:
-		if (trigger->iAcqStartTrigType != ME_TRIG_TYPE_EXT_ANALOG) {
-			PERROR
-			    ("Invalid scan start trigger type specified (Acq is HW analog)\n");
-			err = ME_ERRNO_INVALID_SCAN_START_TRIG_TYPE;
-			goto ERROR;
-		}
-		break;
-
-	case ME_TRIG_TYPE_FOLLOW:
-		break;
-
-	default:
-		PERROR("Invalid scan start trigger type specified.\n");
-		err = ME_ERRNO_INVALID_SCAN_START_TRIG_TYPE;
-		goto ERROR;
-		break;
-	}
-
-	switch (trigger->iConvStartTrigType) {
-
-	case ME_TRIG_TYPE_TIMER:
-		if ((conv_ticks < ME4600_AI_MIN_CHAN_TICKS)
-		    || (conv_ticks > ME4600_AI_MAX_CHAN_TICKS)) {
-			PERROR
-			    ("Invalid conv start trigger argument specified.\n");
-			err = ME_ERRNO_INVALID_CONV_START_ARG;
-			goto ERROR;
-		}
-		break;
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-		if ((trigger->iScanStartTrigType != ME_TRIG_TYPE_FOLLOW)
-		    || (trigger->iAcqStartTrigType !=
-			ME_TRIG_TYPE_EXT_DIGITAL)) {
-			PERROR("Invalid conv start trigger type specified.\n");
-			err = ME_ERRNO_INVALID_CONV_START_TRIG_TYPE;
-			goto ERROR;
-		}
-		break;
-
-	case ME_TRIG_TYPE_EXT_ANALOG:
-		if ((trigger->iScanStartTrigType != ME_TRIG_TYPE_FOLLOW)
-		    || (trigger->iAcqStartTrigType !=
-			ME_TRIG_TYPE_EXT_ANALOG)) {
-			PERROR("Invalid conv start trigger type specified.\n");
-			err = ME_ERRNO_INVALID_CONV_START_TRIG_TYPE;
-			goto ERROR;
-		}
-		break;
-
-	default:
-		PERROR("Invalid conv start trigger type specified.\n");
-		err = ME_ERRNO_INVALID_CONV_START_TRIG_TYPE;
-		goto ERROR;
-
-		break;
-	}
-/**
-* Aceptable settings:
-* iScanStopTrigType		:	iAcqStopTrigType
-*
-* ME_TRIG_TYPE_NONE		:	ME_TRIG_TYPE_NONE	-> infinite count with manual stop
-* ME_TRIG_TYPE_NONE		:	ME_TRIG_TYPE_COUNT	-> stop after getting iScanStopCount list of values (iScanStopCount * count)
-* ME_TRIG_TYPE_COUNT	:	ME_TRIG_TYPE_FOLLOW	-> stop after getting iAcqStopCount values (it can stops in midle of the list)
-*/
-	switch (trigger->iScanStopTrigType) {
-
-	case ME_TRIG_TYPE_NONE:
-		break;
-
-	case ME_TRIG_TYPE_COUNT:
-		if (trigger->iScanStopCount <= 0) {
-			PERROR("Invalid scan stop argument specified.\n");
-			err = ME_ERRNO_INVALID_SCAN_STOP_ARG;
-			goto ERROR;
-		}
-		break;
-
-	default:
-		PERROR("Invalid scan stop trigger type specified.\n");
-		err = ME_ERRNO_INVALID_SCAN_STOP_TRIG_TYPE;
-		goto ERROR;
-		break;
-	}
-
-	switch (trigger->iAcqStopTrigType) {
-
-	case ME_TRIG_TYPE_NONE:
-		if (trigger->iScanStopTrigType != ME_TRIG_TYPE_NONE) {
-			PERROR("Invalid acq stop trigger type specified.\n");
-			err = ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-			goto ERROR;
-		}
-		break;
-
-	case ME_TRIG_TYPE_FOLLOW:
-		if (trigger->iScanStopTrigType != ME_TRIG_TYPE_COUNT) {
-			PERROR("Invalid acq stop trigger type specified.\n");
-			err = ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-			goto ERROR;
-		}
-		break;
-
-	case ME_TRIG_TYPE_COUNT:
-		if (trigger->iScanStopTrigType != ME_TRIG_TYPE_NONE) {
-			PERROR("Invalid acq stop trigger type specified.\n");
-			err = ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-			goto ERROR;
-		}
-
-		if (trigger->iAcqStopCount <= 0) {
-			PERROR
-			    ("Invalid acquisition or scan stop argument specified.\n");
-			err = ME_ERRNO_INVALID_ACQ_STOP_ARG;
-			goto ERROR;
-		}
-		break;
-
-	default:
-		PERROR("Invalid acq stop trigger type specified.\n");
-		err = ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-		goto ERROR;
-		break;
-	}
-
-	if ((count <= 0) || (count > ME4600_AI_LIST_COUNT)) {
-		PERROR("Invalid channel list count specified.\n");
-		err = ME_ERRNO_INVALID_CONFIG_LIST_COUNT;
-		goto ERROR;
-	}
-///This is general limitation
-//      if (fifo_irq_threshold < 0 || fifo_irq_threshold >= ME4600_AI_CIRC_BUF_COUNT)
-///This is limitation from Windows. I use it for compatibility.
-	if (fifo_irq_threshold < 0
-	    || fifo_irq_threshold >= ME4600_AI_FIFO_COUNT) {
-		PERROR("Invalid fifo irq threshold specified.\n");
-		err = ME_ERRNO_INVALID_FIFO_IRQ_THRESHOLD;
-		goto ERROR;
-	}
-
-	if ((config_list[0].iRef == ME_REF_AI_DIFFERENTIAL)
-	    && (instance->channels == 16)) {
-		PERROR
-		    ("Differential reference is not available on this subdevice.\n");
-		err = ME_ERRNO_INVALID_REF;
-		goto ERROR;
-	}
-
-	if (flags & ME_IO_STREAM_CONFIG_SAMPLE_AND_HOLD) {
-		if (!instance->sh) {
-			PERROR
-			    ("Sample and hold is not available for this board.\n");
-			err = ME_ERRNO_INVALID_FLAGS;
-			goto ERROR;
-		}
-		if (config_list[0].iRef == ME_REF_AI_DIFFERENTIAL) {
-			PERROR
-			    ("Sample and hold is not available in differential mode.\n");
-			err = ME_ERRNO_INVALID_FLAGS;
-			goto ERROR;
-		}
-	}
-
-	for (i = 0; i < count; i++) {
-		if ((config_list[i].iStreamConfig < 0)
-		    || (config_list[i].iStreamConfig >= instance->ranges_len)) {
-			PERROR("Invalid stream config specified.\n");
-			err = ME_ERRNO_INVALID_STREAM_CONFIG;
-			goto ERROR;
-		}
-
-		if ((config_list[i].iRef != ME_REF_AI_GROUND)
-		    && (config_list[i].iRef != ME_REF_AI_DIFFERENTIAL)) {
-			PERROR("Invalid references in the list. Ref=0x%x\n",
-			       config_list[i].iRef);
-			err = ME_ERRNO_INVALID_REF;
-			goto ERROR;
-		}
-
-		if (config_list[i].iStreamConfig % 2) {	// StreamConfig: 1 or 3
-			if (config_list[i].iRef == ME_REF_AI_DIFFERENTIAL) {
-				PERROR
-				    ("Only bipolar modes support differential measurement.\n");
-				err = ME_ERRNO_INVALID_REF;
-				goto ERROR;
-			}
-		}
-
-		if (config_list[i].iRef != config_list[0].iRef) {
-			PERROR
-			    ("Not all references in the configuration list are equal. Ref[0]=0x%x Ref[%d]=0x%x\n",
-			     config_list[0].iRef, i, config_list[i].iRef);
-			err = ME_ERRNO_INVALID_REF;
-			goto ERROR;
-		}
-
-		if ((config_list[i].iRef == ME_REF_AI_DIFFERENTIAL)
-		    && (config_list[i].iChannel >= 16)) {
-			PERROR("Channel not available in differential mode.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-			goto ERROR;
-		}
-
-		if ((config_list[i].iChannel < 0)
-		    || (config_list[i].iChannel >= instance->channels)) {
-			PERROR("Invalid channel number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-			goto ERROR;
-		}
-	}
-
-	// Check settings - end
-
-	//Cancel control task
-	PDEBUG("Cancel control task.\n");
-	instance->ai_control_task_flag = 0;
-	cancel_delayed_work(&instance->ai_control_task);
-
-	// Work around from Keith Hartley - begin
-	if (trigger->iScanStartTrigType == ME_TRIG_TYPE_TIMER) {
-		if (count == 1) {
-			// The hardware does not work properly with a non-zero scan time
-			// if there is only ONE channel in the channel list. In this case
-			// we must set the scan time to zero and use the channel time.
-
-			conv_ticks = scan_ticks;
-			trigger->iScanStartTrigType = ME_TRIG_TYPE_FOLLOW;
-		} else if (scan_ticks == count * conv_ticks) {
-			// Another hardware problem. If the number of scan ticks is
-			// exactly equal to the number of channel ticks multiplied by
-			// the number of channels then the sampling rate is reduced
-			// by half.
-			trigger->iScanStartTrigType = ME_TRIG_TYPE_FOLLOW;
-		}
-	}
-	// Work around from Keith Hartley - end
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	if (inl(instance->status_reg) & ME4600_AI_STATUS_BIT_FSM) {
-		PERROR("Subdevice is busy.\n");
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-		ME_SUBDEVICE_EXIT;
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-
-	instance->status = ai_status_none;
-	spin_lock(instance->ctrl_reg_lock);
-	// Stop all actions. Block all interrupts. Clear (disable) FIFOs.
-	ctrl =
-	    ME4600_AI_CTRL_BIT_LE_IRQ_RESET | ME4600_AI_CTRL_BIT_HF_IRQ_RESET |
-	    ME4600_AI_CTRL_BIT_SC_IRQ_RESET;
-
-	tmp = inl(instance->ctrl_reg);
-	// Preserve EXT IRQ and OFFSET settings. Clean other bits.
-	tmp &=
-	    (ME4600_AI_CTRL_BIT_EX_IRQ | ME4600_AI_CTRL_BIT_EX_IRQ_RESET |
-	     ME4600_AI_CTRL_BIT_FULLSCALE | ME4600_AI_CTRL_BIT_OFFSET);
-
-	// Send it to register.
-	outl(tmp | ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp | ctrl);
-
-	// Enable channel fifo -> data fifo in stream_start().
-	ctrl |= ME4600_AI_CTRL_BIT_CHANNEL_FIFO;
-	outl(tmp | ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp | ctrl);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	// Write the channel list
-	for (i = 0; i < count; i++) {
-		entry = config_list[i].iChannel;
-
-		switch (config_list[i].iStreamConfig) {
-		case 0:	//BIPOLAR 10V
-/*
-				// ME4600_AI_LIST_RANGE_BIPOLAR_10 = 0x0000
-				// 'entry |= ME4600_AI_LIST_RANGE_BIPOLAR_10' <== Do nothing. Removed.
-				entry |= ME4600_AI_LIST_RANGE_BIPOLAR_10;
-*/
-			break;
-		case 1:	//UNIPOLAR 10V
-			entry |= ME4600_AI_LIST_RANGE_UNIPOLAR_10;
-			break;
-		case 2:	//BIPOLAR 2.5V
-			entry |= ME4600_AI_LIST_RANGE_BIPOLAR_2_5;
-			break;
-		case 3:	//UNIPOLAR 2.5V
-			entry |= ME4600_AI_LIST_RANGE_UNIPOLAR_2_5;
-			break;
-		default:
-			PERROR_CRITICAL("UNCHECK ERROR in config_list!\n");
-			PERROR_CRITICAL
-			    ("WRONG range\nPosition:%d Range:0x%04X\n", i,
-			     config_list[i].iStreamConfig);
-			goto VERIFY_ERROR;
-			break;
-		}
-
-		switch (config_list[i].iRef) {
-		case ME_REF_AI_GROUND:	//SINGLE ENDED
-/*
-				// ME4600_AI_LIST_INPUT_SINGLE_ENDED = 0x0000
-				// 'entry |= ME4600_AI_LIST_INPUT_SINGLE_ENDED' ==> Do nothing. Removed.
-				entry |= ME4600_AI_LIST_INPUT_SINGLE_ENDED;
-*/ break;
-		case ME_REF_AI_DIFFERENTIAL:	//DIFFERENTIAL
-			entry |= ME4600_AI_LIST_INPUT_DIFFERENTIAL;
-			break;
-		default:
-			PERROR_CRITICAL("UNCHECK ERROR in config_list!\n");
-			PERROR_CRITICAL
-			    ("WRONG reference\nPosition:%d Reference:0x%04X\n",
-			     i, config_list[i].iRef);
-			goto VERIFY_ERROR;
-			break;
-		}
-
-		//Add last entry flag
-		if (i == (count - 1)) {
-			entry |= ME4600_AI_LIST_LAST_ENTRY;
-		}
-
-		outl(entry, instance->channel_list_reg);
-		PDEBUG_REG("channel_list_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->channel_list_reg - instance->reg_base,
-			   entry);
-	}
-
-	// Set triggering registers
-	--acq_ticks;
-	outl(acq_ticks, instance->chan_pre_timer_reg);
-	PDEBUG_REG("chan_pre_timer_reg outl(0x%lX+0x%lX)=0x%llX\n",
-		   instance->reg_base,
-		   instance->chan_pre_timer_reg - instance->reg_base,
-		   acq_ticks);
-	outl(acq_ticks, instance->scan_pre_timer_low_reg);
-	PDEBUG_REG("scan_pre_timer_low_reg outl(0x%lX+0x%lX)=0x%llX\n",
-		   instance->reg_base,
-		   instance->scan_pre_timer_low_reg - instance->reg_base,
-		   acq_ticks & 0xFFFFFFFF);
-	outl((acq_ticks >> 32), instance->scan_pre_timer_high_reg);
-	PDEBUG_REG("scan_pre_timer_high_reg outl(0x%lX+0x%lX)=0x%llX\n",
-		   instance->reg_base,
-		   instance->scan_pre_timer_high_reg - instance->reg_base,
-		   (acq_ticks >> 32) & 0xFFFFFFFF);
-
-	// Set triggers
-	switch (trigger->iAcqStartTrigType) {
-		// Internal
-	case ME_TRIG_TYPE_SW:
-		// Nothing to set.
-		break;
-
-		// External
-	case ME_TRIG_TYPE_EXT_ANALOG:
-		ctrl |= ME4600_AI_CTRL_BIT_EX_TRIG_ANALOG;
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-		ctrl |= ME4600_AI_CTRL_BIT_EX_TRIG;
-
-		// External trigger needs edge's definition
-		switch (trigger->iAcqStartTrigEdge) {
-		case ME_TRIG_EDGE_RISING:
-			// Nothing to set.
-			break;
-
-		case ME_TRIG_EDGE_FALLING:
-			ctrl |= ME4600_AI_CTRL_BIT_EX_TRIG_FALLING;
-			break;
-
-		case ME_TRIG_EDGE_ANY:
-			ctrl |=
-			    ME4600_AI_CTRL_BIT_EX_TRIG_FALLING |
-			    ME4600_AI_CTRL_BIT_EX_TRIG_BOTH;
-			break;
-
-		default:
-			PERROR_CRITICAL
-			    ("UNCHECK TRIGGER EDGE in triggers structure!\n");
-			PERROR_CRITICAL
-			    ("WRONG acquisition start trigger:0x%04X.\n",
-			     trigger->iAcqStartTrigEdge);
-			err = ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE;
-			goto VERIFY_ERROR;
-			break;
-		}
-		break;
-
-	default:
-		PERROR_CRITICAL("UNCHECK TRIGGER in triggers structure!\n");
-		PERROR_CRITICAL("WRONG acquisition start trigger:0x%04X.\n",
-				trigger->iAcqStartTrigType);
-		err = ME_ERRNO_INVALID_ACQ_START_TRIG_TYPE;
-		goto VERIFY_ERROR;
-		break;
-	}
-
-	switch (trigger->iScanStartTrigType) {
-	case ME_TRIG_TYPE_TIMER:
-		--scan_ticks;
-		outl(scan_ticks, instance->scan_timer_low_reg);
-		PDEBUG_REG("scan_timer_low_reg outl(0x%lX+0x%lX)=0x%llX\n",
-			   instance->reg_base,
-			   instance->scan_timer_low_reg - instance->reg_base,
-			   scan_ticks & 0xFFFFFFFF);
-		outl((scan_ticks >> 32), instance->scan_timer_high_reg);
-		PDEBUG_REG("scan_timer_high_reg outl(0x%lX+0x%lX)=0x%llX\n",
-			   instance->reg_base,
-			   instance->scan_timer_high_reg - instance->reg_base,
-			   (scan_ticks >> 32) & 0xFFFFFFFF);
-
-		if (trigger->iAcqStartTrigType == ME_TRIG_TYPE_SW) {
-			ctrl |= ME4600_AI_CTRL_BIT_MODE_0;
-		} else {
-			ctrl |= ME4600_AI_CTRL_BIT_MODE_1;
-		}
-		break;
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-	case ME_TRIG_TYPE_EXT_ANALOG:
-		outl(0, instance->scan_timer_low_reg);
-		PDEBUG_REG("scan_timer_low_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->scan_timer_low_reg - instance->reg_base,
-			   0);
-		outl(0, instance->scan_timer_high_reg);
-		PDEBUG_REG("scan_timer_high_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->scan_timer_high_reg - instance->reg_base,
-			   0);
-		ctrl |= ME4600_AI_CTRL_BIT_MODE_2;
-		break;
-
-	case ME_TRIG_TYPE_FOLLOW:
-		outl(0, instance->scan_timer_low_reg);
-		PDEBUG_REG("scan_timer_low_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->scan_timer_low_reg - instance->reg_base,
-			   0);
-		outl(0, instance->scan_timer_high_reg);
-		PDEBUG_REG("scan_timer_high_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->scan_timer_high_reg - instance->reg_base,
-			   0);
-
-		if (trigger->iAcqStartTrigType == ME_TRIG_TYPE_SW) {
-			ctrl |= ME4600_AI_CTRL_BIT_MODE_0;
-		} else {
-			ctrl |= ME4600_AI_CTRL_BIT_MODE_1;
-		}
-		break;
-
-	default:
-		PERROR_CRITICAL("UNCHECK TRIGGER in triggers structure!\n");
-		PERROR_CRITICAL("WRONG scan start trigger:0x%04X.\n",
-				trigger->iScanStartTrigType);
-		err = ME_ERRNO_INVALID_SCAN_START_TRIG_TYPE;
-		goto VERIFY_ERROR;
-		break;
-	}
-
-	switch (trigger->iConvStartTrigType) {
-
-	case ME_TRIG_TYPE_TIMER:
-		--conv_ticks;
-		outl(conv_ticks, instance->chan_timer_reg);
-		PDEBUG_REG("chan_timer_reg outl(0x%lX+0x%lX)=0x%llX\n",
-			   instance->reg_base,
-			   instance->chan_timer_reg - instance->reg_base,
-			   conv_ticks);
-		break;
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-	case ME_TRIG_TYPE_EXT_ANALOG:
-		outl(0, instance->chan_timer_reg);
-		PDEBUG_REG("chan_timer_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->chan_timer_reg - instance->reg_base, 0);
-		ctrl |= ME4600_AI_CTRL_BIT_MODE_0 | ME4600_AI_CTRL_BIT_MODE_1;
-		break;
-
-	default:
-		PERROR_CRITICAL("UNCHECK TRIGGER in triggers structure!\n");
-		PERROR_CRITICAL("WRONG conv start trigger:0x%04X.\n",
-				trigger->iConvStartTrigType);
-		err = ME_ERRNO_INVALID_CONV_START_TRIG_TYPE;
-		goto VERIFY_ERROR;
-
-		break;
-	}
-
-	//Sample & Hold feature
-	if (flags & ME_IO_STREAM_CONFIG_SAMPLE_AND_HOLD) {
-		if (instance->sh) {
-			ctrl |= ME4600_AI_CTRL_BIT_SAMPLE_HOLD;
-		} else {
-			PERROR_CRITICAL("UNCHECK S&H feature!\n");
-			err = ME_ERRNO_INVALID_FLAGS;
-			goto VERIFY_ERROR;
-		}
-	}
-	//Enable IRQs sources but leave latches blocked.
-	ctrl |= (ME4600_AI_CTRL_BIT_HF_IRQ | ME4600_AI_CTRL_BIT_SC_IRQ | ME4600_AI_CTRL_BIT_LE_IRQ);	//The last IRQ source (ME4600_AI_CTRL_BIT_LE_IRQ) is unused!
-
-	//Everything is good. Finalize
-	spin_lock(instance->ctrl_reg_lock);
-	tmp = inl(instance->ctrl_reg);
-
-	//Preserve EXT IRQ and OFFSET settings. Clean other bits.
-	tmp &=
-	    (ME4600_AI_CTRL_BIT_EX_IRQ | ME4600_AI_CTRL_BIT_EX_IRQ_RESET |
-	     ME4600_AI_CTRL_BIT_FULLSCALE | ME4600_AI_CTRL_BIT_OFFSET);
-
-	// write the control word
-	outl(ctrl | tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl | tmp);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	//Set the global parameters end exit.
-	instance->chan_list_len = count;
-	instance->fifo_irq_threshold = fifo_irq_threshold;
-
-	if (trigger->iAcqStopTrigType == ME_TRIG_TYPE_COUNT) {
-		data_required =
-		    (unsigned long long)trigger->iAcqStopCount *
-		    (unsigned long long)count;
-		if (data_required > UINT_MAX)
-			data_required = UINT_MAX;
-		instance->data_required = (unsigned int)data_required;
-	} else if (trigger->iScanStopTrigType == ME_TRIG_TYPE_COUNT)
-		instance->data_required =
-		    (unsigned long long)trigger->iScanStopCount;
-	else
-		instance->data_required = 0;
-
-	// Mark subdevice as configured to work in stream mode.
-	instance->status = ai_status_stream_configured;
-
-	// Deinit single config. Set all entries to NOT_CONFIGURED.
-	for (i = 0; i < instance->channels; i++) {
-		instance->single_config[i].status =
-		    ME_SINGLE_CHANNEL_NOT_CONFIGURED;
-	}
-
-VERIFY_ERROR:		// Error in code. Wrong setting check. This should never ever happend!
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-ERROR:			// Error in settings.
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ai_io_stream_new_values(me_subdevice_t *subdevice,
-					  struct file *filep,
-					  int time_out, int *count, int flags)
-{
-	me4600_ai_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long t;
-	unsigned long j;
-	int volatile head;
-
-	PDEBUG("executed. idx=0\n");
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		t = (time_out * HZ) / 1000;
-
-		if (t == 0)
-			t = 1;
-	} else {		// Max time.
-		t = LONG_MAX;
-	}
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	j = jiffies;
-
-	while (1) {
-		// Only runing device can generate break.
-		head = instance->circ_buf.head;
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 ((head !=
-						   instance->circ_buf.head)
-						  ||
-						  ((instance->status <=
-						    ai_status_stream_run_wait)
-						   && (instance->status >=
-						       ai_status_stream_end_wait))),
-						 t);
-
-		if (head != instance->circ_buf.head) {	// New data in buffer.
-			break;
-		} else if (instance->status == ai_status_stream_end) {	// End of work.
-			break;
-		} else if (instance->status == ai_status_stream_fifo_error) {
-			err = ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-			break;
-		} else if (instance->status == ai_status_stream_buffer_error) {
-			err = ME_ERRNO_RING_BUFFER_OVERFLOW;
-			break;
-		} else if (instance->status == ai_status_stream_error) {
-			err = ME_ERRNO_INTERNAL;
-			break;
-		} else if ((jiffies - j) >= t) {
-			PERROR("Wait on values timed out.\n");
-			err = ME_ERRNO_TIMEOUT;
-			break;
-		} else if (signal_pending(current)) {
-			PERROR("Wait on values interrupted from signal.\n");
-			err = ME_ERRNO_SIGNAL;
-			break;
-		}
-		// Correct timeout.
-		t -= jiffies - j;
-	}
-
-	*count = me_circ_buf_values(&instance->circ_buf);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static inline int me4600_ai_io_stream_read_get_value(me4600_ai_subdevice_t *
-						     instance, int *values,
-						     const int count,
-						     const int flags)
-{
-	int n;
-	int i;
-	uint32_t value;
-
-	///Checking how many datas can be copied.
-	n = me_circ_buf_values(&instance->circ_buf);
-	if (n <= 0)
-		return 0;
-
-	if (n > count)
-		n = count;
-
-	if (flags & ME_IO_STREAM_READ_FRAMES) {
-		if (n < instance->chan_list_len)	//Not enough data!
-			return 0;
-		n -= n % instance->chan_list_len;
-	}
-
-	for (i = 0; i < n; i++) {
-		value = *(instance->circ_buf.buf + instance->circ_buf.tail);
-		if (put_user(value, values + i)) {
-			PERROR("Cannot copy new values to user.\n");
-			return -ME_ERRNO_INTERNAL;
-		}
-		instance->circ_buf.tail++;
-		instance->circ_buf.tail &= instance->circ_buf.mask;
-	}
-	return n;
-}
-
-static int me4600_ai_io_stream_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int read_mode,
-				    int *values, int *count, int flags)
-{
-	me4600_ai_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	int ret;
-
-	int c = *count;
-	int min = c;
-
-	PDEBUG("executed. idx=0\n");
-
-	if (flags & ~ME_IO_STREAM_READ_FRAMES) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!values || !count) {
-		PERROR("Request has invalid pointer.\n");
-		return ME_ERRNO_INVALID_POINTER;
-	}
-
-	if (c < 0) {
-		PERROR("Request has invalid value's counter.\n");
-		return ME_ERRNO_INVALID_VALUE_COUNT;
-	}
-
-	if ((read_mode != ME_READ_MODE_BLOCKING)
-	    && (read_mode != ME_READ_MODE_NONBLOCKING)) {
-		PERROR("Invalid read mode specified.\n");
-		return ME_ERRNO_INVALID_READ_MODE;
-	}
-
-	if (c == 0) {		//You get what you want! Nothing more or less.
-		return ME_ERRNO_SUCCESS;
-	}
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-	ME_SUBDEVICE_ENTER;
-
-	//Check if subdevice is configured.
-	if (instance->chan_list_len <= 0) {
-		PERROR("Subdevice wasn't configured.\n");
-		ME_SUBDEVICE_EXIT;
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	if (flags & ME_IO_STREAM_READ_FRAMES) {
-		if (c < instance->chan_list_len) {	//Not enough data requested.
-			PERROR
-			    ("When using FRAME_READ mode minimal size is defined by channel list.\n");
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INVALID_VALUE_COUNT;
-		}
-	}
-
-	if (c > (ME4600_AI_CIRC_BUF_COUNT - instance->chan_list_len)) {	// To return acceptable amount of data when user pass too big value.
-		min = ME4600_AI_CIRC_BUF_COUNT - instance->chan_list_len;
-	}
-
-	if (flags & ME_IO_STREAM_READ_FRAMES) {
-		//Wait for whole list.
-		if (read_mode == ME_READ_MODE_BLOCKING) {
-			min = c - (c % instance->chan_list_len);
-		}
-
-		if (read_mode == ME_READ_MODE_NONBLOCKING) {
-			min = instance->chan_list_len;
-		}
-	}
-
-	if ((inl(instance->status_reg) & ME4600_AI_STATUS_BIT_FSM)) {	//Working
-		//If blocking mode -> wait for data.
-		if ((me_circ_buf_values(&instance->circ_buf) < min)
-		    && (read_mode == ME_READ_MODE_BLOCKING)) {
-			wait_event_interruptible(instance->wait_queue,
-						 ((me_circ_buf_values
-						   (&instance->circ_buf) >= min)
-						  || !(inl(instance->status_reg)
-						       &
-						       ME4600_AI_STATUS_BIT_FSM)));
-
-			if (signal_pending(current)) {
-				PERROR
-				    ("Wait on values interrupted from signal.\n");
-				err = ME_ERRNO_SIGNAL;
-			}
-		}
-	}
-
-	ret = me4600_ai_io_stream_read_get_value(instance, values, c, flags);
-	if (ret < 0) {
-		err = -ret;
-		*count = 0;
-	} else if (ret == 0) {
-		*count = 0;
-		if (instance->status == ai_status_stream_fifo_error) {
-			err = ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-			instance->status = ai_status_stream_end;
-		} else if (instance->status == ai_status_stream_buffer_error) {
-			err = ME_ERRNO_RING_BUFFER_OVERFLOW;
-			instance->status = ai_status_stream_end;
-		} else if (instance->status == ai_status_stream_end) {
-			err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-		} else if (instance->status == ai_status_stream_error) {
-			err = ME_ERRNO_INTERNAL;
-		} else if (instance->status == ai_status_none) {
-			PDEBUG("Stream canceled.\n");
-			err = ME_ERRNO_INTERNAL;
-		}
-	} else {
-		*count = ret;
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-/** @brief Stop aqusation. Preserve FIFOs.
-*
-* @param instance The subdevice instance (pointer).
-*/
-
-static int ai_stop_immediately(me4600_ai_subdevice_t *instance)
-{
-	unsigned long cpu_flags = 0;
-	volatile uint32_t ctrl;
-	const int timeout = HZ / 10;	//100ms
-	int i;
-
-	for (i = 0; i <= timeout; i++) {
-		spin_lock_irqsave(instance->ctrl_reg_lock, cpu_flags);
-		ctrl = inl(instance->ctrl_reg);
-		ctrl &= ~ME4600_AI_CTRL_BIT_STOP;
-		ctrl |=
-		    (ME4600_AI_CTRL_BIT_IMMEDIATE_STOP |
-		     ME4600_AI_CTRL_BIT_HF_IRQ_RESET |
-		     ME4600_AI_CTRL_BIT_SC_IRQ_RESET);
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-		spin_unlock_irqrestore(instance->ctrl_reg_lock, cpu_flags);
-
-		if (!(inl(instance->status_reg) & ME4600_AI_STATUS_BIT_FSM)) {	// Exit.
-			break;
-		}
-
-		PINFO("Wait for stop: %d\n", i + 1);
-		//Still working!
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(1);
-	}
-
-	if (i > timeout) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		return ME_ERRNO_INTERNAL;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ai_io_stream_start(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int start_mode, int time_out, int flags)
-{
-	me4600_ai_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags = 0;
-	unsigned long ref;
-	unsigned long delay = 0;
-
-	volatile uint32_t tmp;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((start_mode != ME_START_MODE_BLOCKING)
-	    && (start_mode != ME_START_MODE_NONBLOCKING)) {
-		PERROR("Invalid start mode specified.\n");
-		return ME_ERRNO_INVALID_START_MODE;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-
-		if (delay == 0)
-			delay = 1;
-	}
-
-	ME_SUBDEVICE_ENTER
-	    spin_lock_irqsave(instance->ctrl_reg_lock, cpu_flags);
-
-	tmp = inl(instance->ctrl_reg);
-
-	if ((tmp & ME4600_AI_STATUS_BIT_FSM)) {
-		PERROR("Conversion is already running.\n");
-		spin_unlock_irqrestore(instance->ctrl_reg_lock, cpu_flags);
-		err = ME_ERRNO_SUBDEVICE_BUSY;
-		goto ERROR;
-	}
-
-	if (instance->chan_list_len == 0) {	//Not configured!
-		PERROR("Subdevice is not configured to work in stream mode!\n");
-		spin_unlock_irqrestore(instance->ctrl_reg_lock, cpu_flags);
-		err = ME_ERRNO_PREVIOUS_CONFIG;
-		goto ERROR;
-	}
-
-	if (!(tmp & (ME4600_AI_CTRL_BIT_MODE_0 | ME4600_AI_CTRL_BIT_MODE_1 | ME4600_AI_CTRL_BIT_MODE_2))) {	//Mode 0 = single work => no stream config
-		PERROR("Subdevice is configured to work in single mode.\n");
-		spin_unlock_irqrestore(instance->ctrl_reg_lock, cpu_flags);
-		err = ME_ERRNO_PREVIOUS_CONFIG;
-		goto ERROR;
-	}
-	//Reset stop bits.
-	tmp |= ME4600_AI_CTRL_BIT_IMMEDIATE_STOP | ME4600_AI_CTRL_BIT_STOP;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	//Start datas' FIFO.
-	tmp |= ME4600_AI_CTRL_BIT_DATA_FIFO;
-	//Free stop bits.
-	tmp &= ~(ME4600_AI_CTRL_BIT_IMMEDIATE_STOP | ME4600_AI_CTRL_BIT_STOP);
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	spin_unlock_irqrestore(instance->ctrl_reg_lock, cpu_flags);
-
-	//Cancel control task
-	PDEBUG("Cancel control task.\n");
-	instance->ai_control_task_flag = 0;
-	cancel_delayed_work(&instance->ai_control_task);
-
-	//Set the starting values.
-	instance->ISM.global_read = 0;
-	instance->ISM.read = 0;
-	//Clear circular buffer
-	instance->circ_buf.head = 0;
-	instance->circ_buf.tail = 0;
-
-	//Set everything.
-	ai_data_acquisition_logic(instance);
-
-	//Set status to 'wait for start'
-	instance->status = ai_status_stream_run_wait;
-
-	// Set control task's timeout
-	instance->timeout.delay = delay;
-	instance->timeout.start_time = jiffies;
-
-	//Lets go! Start work
-	inl(instance->start_reg);
-	PDEBUG_REG("start_reg inl(0x%lX+0x%lX)\n", instance->reg_base,
-		   instance->start_reg - instance->reg_base);
-
-	// Schedule control task
-	instance->ai_control_task_flag = 1;
-	queue_delayed_work(instance->me4600_workqueue,
-			   &instance->ai_control_task, 1);
-
-	PDEVELOP("Delay:%ld\n", delay);
-
-	if (start_mode == ME_START_MODE_BLOCKING) {	//Wait for start.
-		ref = jiffies;
-		//Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ai_status_stream_run_wait),
-						 (delay) ? delay +
-						 1 : LONG_MAX);
-
-		if ((instance->status != ai_status_stream_run)
-		    && (instance->status != ai_status_stream_end)) {
-			PDEBUG("Starting stream canceled. %d\n",
-			       instance->status);
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			instance->status = ai_status_none;
-			ai_stop_isr(instance);
-			err = ME_ERRNO_SIGNAL;
-		} else if ((delay) && ((jiffies - ref) > delay)) {
-			if (instance->status != ai_status_stream_run) {
-				if (instance->status == ai_status_stream_end) {
-					PDEBUG("Timeout reached.\n");
-				} else if ((jiffies - ref) > delay + 1) {
-					PERROR
-					    ("Timeout reached. Not handled by control task!\n");
-					ai_stop_isr(instance);
-					instance->status =
-					    ai_status_stream_error;
-				} else {
-					PERROR
-					    ("Timeout reached. Signal come but status is strange: %d\n",
-					     instance->status);
-					ai_stop_isr(instance);
-					instance->status =
-					    ai_status_stream_error;
-				}
-
-				instance->ai_control_task_flag = 0;
-				cancel_delayed_work(&instance->ai_control_task);
-				err = ME_ERRNO_TIMEOUT;
-			}
-		}
-	}
-#ifdef MEDEBUG_INFO
-	tmp = inl(instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg inl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	PINFO("STATUS_BIT_FSM=%s.\n",
-	      (tmp & ME4600_AI_STATUS_BIT_FSM) ? "on" : "off");
-	PINFO("CTRL_BIT_HF_IRQ=%s.\n",
-	      (tmp & ME4600_AI_CTRL_BIT_HF_IRQ) ? "enable" : "disable");
-	PINFO("CTRL_BIT_HF_IRQ_RESET=%s.\n",
-	      (tmp & ME4600_AI_CTRL_BIT_HF_IRQ_RESET) ? "reset" : "work");
-	PINFO("CTRL_BIT_SC_IRQ=%s.\n",
-	      (tmp & ME4600_AI_CTRL_BIT_SC_IRQ) ? "enable" : "disable");
-	PINFO("CTRL_BIT_SC_RELOAD=%s.\n",
-	      (tmp & ME4600_AI_CTRL_BIT_SC_RELOAD) ? "on" : "off");
-	PINFO("CTRL_BIT_SC_IRQ_RESET=%s.\n",
-	      (tmp & ME4600_AI_CTRL_BIT_SC_IRQ_RESET) ? "reset" : "work");
-#endif
-
-ERROR:
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ai_io_stream_status(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int wait,
-				      int *status, int *values, int flags)
-{
-	me4600_ai_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	switch (instance->status) {
-	case ai_status_single_configured:
-	case ai_status_stream_configured:
-	case ai_status_stream_end:
-	case ai_status_stream_fifo_error:
-	case ai_status_stream_buffer_error:
-	case ai_status_stream_error:
-		*status = ME_STATUS_IDLE;
-		break;
-
-	case ai_status_stream_run_wait:
-	case ai_status_stream_run:
-	case ai_status_stream_end_wait:
-		*status = ME_STATUS_BUSY;
-		break;
-
-	case ai_status_none:
-	default:
-		*status =
-		    (inl(instance->status_reg) & ME4600_AI_STATUS_BIT_FSM) ?
-		    ME_STATUS_BUSY : ME_STATUS_IDLE;
-		break;
-	}
-
-	if ((wait == ME_WAIT_IDLE) && (*status == ME_STATUS_BUSY)) {
-		// Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 ((instance->status !=
-						   ai_status_stream_run_wait)
-						  && (instance->status !=
-						      ai_status_stream_run)
-						  && (instance->status !=
-						      ai_status_stream_end_wait)),
-						 LONG_MAX);
-
-		if (instance->status != ai_status_stream_end) {
-			PDEBUG("Wait for IDLE canceled. %d\n",
-			       instance->status);
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait for IDLE interrupted.\n");
-			instance->status = ai_status_none;
-			ai_stop_isr(instance);
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		*status = ME_STATUS_IDLE;
-	}
-
-	*values = me_circ_buf_values(&instance->circ_buf);
-	PDEBUG("me_circ_buf_values(&instance->circ_buf)=%d.\n", *values);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ai_io_stream_stop(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int stop_mode, int flags)
-{
-/**
- @note Stop is implemented only in blocking mode.
- @note Function return when state machine is stoped.
-*/
-	me4600_ai_subdevice_t *instance;
-	unsigned long cpu_flags;
-	uint32_t ctrl;
-	int ret;
-
-	PDEBUG("executed. idx=0\n");
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((stop_mode != ME_STOP_MODE_IMMEDIATE)
-	    && (stop_mode != ME_STOP_MODE_LAST_VALUE)) {
-		PERROR("Invalid stop mode specified.\n");
-		return ME_ERRNO_INVALID_STOP_MODE;
-	}
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	// Mark as stopping. => Software stop.
-	instance->status = ai_status_stream_end_wait;
-
-	if (stop_mode == ME_STOP_MODE_IMMEDIATE) {
-		ret = ai_stop_immediately(instance);
-
-		if (ret) {
-			PERROR("FSM is still busy.\n");
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_SUBDEVICE_BUSY;
-		}
-		instance->ai_control_task_flag = 0;
-
-	} else if (stop_mode == ME_STOP_MODE_LAST_VALUE) {
-		// Set stop bit in registry.
-		spin_lock_irqsave(instance->ctrl_reg_lock, cpu_flags);
-		ctrl = inl(instance->ctrl_reg);
-		ctrl |= ME4600_AI_CTRL_BIT_STOP;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-		spin_unlock_irqrestore(instance->ctrl_reg_lock, cpu_flags);
-
-		// Only runing process will interrupt this call. Events are signaled when status change.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ai_status_stream_end_wait),
-						 LONG_MAX);
-
-		if (instance->status != ai_status_stream_end) {
-			PDEBUG("Stopping stream canceled.\n");
-			ret = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Stopping stream interrupted.\n");
-			instance->status = ai_status_none;
-			ret = ME_ERRNO_SIGNAL;
-		}
-		// End of work.
-		ai_stop_immediately(instance);
-
-	}
-
-	ret = ai_read_data_pooling(instance);
-	if (ret > 0) {		// Everything fine. More datas put to software buffer.
-		instance->status = ai_status_stream_end;
-		ret = ME_ERRNO_SUCCESS;
-		// Signal that we put last data to software buffer.
-		wake_up_interruptible_all(&instance->wait_queue);
-	} else if (ret == 0) {	// Everything fine. No more datas in FIFO.
-		instance->status = ai_status_stream_end;
-		ret = ME_ERRNO_SUCCESS;
-	} else if (ret == -ME_ERRNO_RING_BUFFER_OVERFLOW) {	// Stop is unsuccessful, buffer is overflow.
-		instance->status = ai_status_stream_buffer_error;
-		ret = ME_ERRNO_SUCCESS;
-	} else {		// Stop is unsuccessful
-		instance->status = ai_status_stream_end;
-		ret = -ret;
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return ret;
-}
-
-static int me4600_ai_query_range_by_min_max(me_subdevice_t *subdevice,
-					    int unit,
-					    int *min,
-					    int *max, int *maxdata, int *range)
-{
-	me4600_ai_subdevice_t *instance;
-	int i;
-	int r = -1;
-	int diff = 21E6;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	if ((*max - *min) < 0) {
-		PERROR("Invalid minimum and maximum values specified.\n");
-		return ME_ERRNO_INVALID_MIN_MAX;
-	}
-
-	if ((unit == ME_UNIT_VOLT) || (unit == ME_UNIT_ANY)) {
-		for (i = 0; i < instance->ranges_len; i++) {
-			if ((instance->ranges[i].min <= *min)
-			    && ((instance->ranges[i].max + 1000) >= *max)) {
-				if ((instance->ranges[i].max -
-				     instance->ranges[i].min) - (*max - *min) <
-				    diff) {
-					r = i;
-					diff =
-					    (instance->ranges[i].max -
-					     instance->ranges[i].min) - (*max -
-									 *min);
-				}
-			}
-		}
-
-		if (r < 0) {
-			PERROR("No matching range found.\n");
-			return ME_ERRNO_NO_RANGE;
-		} else {
-			*min = instance->ranges[r].min;
-			*max = instance->ranges[r].max;
-			*maxdata = ME4600_AI_MAX_DATA;
-			*range = r;
-		}
-	} else {
-		PERROR("Invalid physical unit specified.\n");
-		return ME_ERRNO_INVALID_UNIT;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ai_query_number_ranges(me_subdevice_t *subdevice,
-					 int unit, int *count)
-{
-	me4600_ai_subdevice_t *instance;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	if ((unit == ME_UNIT_VOLT) || (unit == ME_UNIT_ANY)) {
-		*count = instance->ranges_len;
-	} else {
-		*count = 0;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ai_query_range_info(me_subdevice_t *subdevice,
-				      int range,
-				      int *unit,
-				      int *min, int *max, int *maxdata)
-{
-	me4600_ai_subdevice_t *instance;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	if ((range < instance->ranges_len) && (range >= 0)) {
-		*unit = ME_UNIT_VOLT;
-		*min = instance->ranges[range].min;
-		*max = instance->ranges[range].max;
-		*maxdata = ME4600_AI_MAX_DATA;
-	} else {
-		PERROR("Invalid range number specified.\n");
-		return ME_ERRNO_INVALID_RANGE;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ai_query_timer(me_subdevice_t *subdevice,
-				 int timer,
-				 int *base_frequency,
-				 long long *min_ticks, long long *max_ticks)
-{
-	me4600_ai_subdevice_t *instance;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	switch (timer) {
-
-	case ME_TIMER_ACQ_START:
-		*base_frequency = ME4600_AI_BASE_FREQUENCY;
-		*min_ticks = ME4600_AI_MIN_ACQ_TICKS;
-		*max_ticks = ME4600_AI_MAX_ACQ_TICKS;
-		break;
-
-	case ME_TIMER_SCAN_START:
-		*base_frequency = ME4600_AI_BASE_FREQUENCY;
-		*min_ticks = ME4600_AI_MIN_SCAN_TICKS;
-		*max_ticks = ME4600_AI_MAX_SCAN_TICKS;
-		break;
-
-	case ME_TIMER_CONV_START:
-		*base_frequency = ME4600_AI_BASE_FREQUENCY;
-		*min_ticks = ME4600_AI_MIN_CHAN_TICKS;
-		*max_ticks = ME4600_AI_MAX_CHAN_TICKS;
-		break;
-
-	default:
-		PERROR("Invalid timer specified.(0x%04x)\n", timer);
-
-		return ME_ERRNO_INVALID_TIMER;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ai_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	me4600_ai_subdevice_t *instance;
-
-	PDEBUG("executed. idx=0\n");
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-	*number = instance->channels;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ai_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed. idx=0\n");
-
-	*type = ME_TYPE_AI;
-	*subtype = ME_SUBTYPE_STREAMING;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ai_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed. idx=0\n");
-
-	*caps =
-	    ME_CAPS_AI_TRIG_SYNCHRONOUS | ME_CAPS_AI_FIFO |
-	    ME_CAPS_AI_FIFO_THRESHOLD;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ai_query_subdevice_caps_args(struct me_subdevice *subdevice,
-					       int cap, int *args, int count)
-{
-	me4600_ai_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	instance = (me4600_ai_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=0\n");
-
-	if (count != 1) {
-		PERROR("Invalid capability argument count.\n");
-		return ME_ERRNO_INVALID_CAP_ARG_COUNT;
-	}
-
-	switch (cap) {
-	case ME_CAP_AI_FIFO_SIZE:
-		args[0] = ME4600_AI_FIFO_COUNT;
-		break;
-
-	case ME_CAP_AI_BUFFER_SIZE:
-		args[0] =
-		    (instance->circ_buf.buf) ? ME4600_AI_CIRC_BUF_COUNT : 0;
-		break;
-
-	default:
-		PERROR("Invalid capability.\n");
-		err = ME_ERRNO_INVALID_CAP;
-		args[0] = 0;
-	}
-
-	return err;
-}
-
-void ai_limited_isr(me4600_ai_subdevice_t *instance, const uint32_t irq_status,
-		    const uint32_t ctrl_status)
-{
-	int to_read;
-
-	if (!instance->fifo_irq_threshold) {	//No threshold provided. SC ends work. HF need reseting.
-		if (irq_status & ME4600_IRQ_STATUS_BIT_SC) {
-			if (ai_read_data(instance, instance->ISM.next) != instance->ISM.next) {	//ERROR!
-				PERROR
-				    ("Limited amounts aqusition with TH=0: Circular buffer full!\n");
-				instance->status =
-				    ai_status_stream_buffer_error;
-			} else {
-				instance->status = ai_status_stream_end;
-			}
-			//End of work.
-			ai_stop_isr(instance);
-		} else if (irq_status & ME4600_IRQ_STATUS_BIT_AI_HF) {
-			instance->ISM.global_read += ME4600_AI_FIFO_HALF;
-
-			if (ai_read_data(instance, ME4600_AI_FIFO_HALF) != ME4600_AI_FIFO_HALF) {	//ERROR!
-				PERROR
-				    ("Limited amounts aqusition with TH = 0: Circular buffer full!\n");
-				//End of work.
-				ai_stop_isr(instance);
-				instance->status =
-				    ai_status_stream_buffer_error;
-			} else {
-				//Continue.
-				ai_limited_ISM(instance, irq_status);
-			}
-		}
-		//Signal user.
-		wake_up_interruptible_all(&instance->wait_queue);
-	} else			//if(instance->fifo_irq_threshold)
-	{
-		if (irq_status & ME4600_IRQ_STATUS_BIT_SC) {
-			instance->ISM.read = 0;
-			if ((instance->fifo_irq_threshold < ME4600_AI_FIFO_HALF)
-			    && (!(ctrl_status & ME4600_AI_STATUS_BIT_HF_DATA)))
-			{
-				to_read =
-				    ME4600_AI_FIFO_HALF -
-				    (ME4600_AI_FIFO_HALF %
-				     instance->fifo_irq_threshold);
-				PDEBUG
-				    ("Limited amounts aqusition with TH != 0: Not fast enough data aqusition! correction=%d\n",
-				     to_read);
-			} else {
-				to_read = instance->ISM.next;
-			}
-			instance->ISM.global_read += to_read;
-
-			ai_reschedule_SC(instance);
-
-			if (ai_read_data(instance, to_read) != to_read) {	//ERROR!
-				PERROR
-				    ("Limited amounts aqusition with TH != 0: Circular buffer full!\n");
-				//End of work.
-				ai_stop_isr(instance);
-				instance->status =
-				    ai_status_stream_buffer_error;
-			} else {
-				//Continue.
-				ai_limited_ISM(instance, irq_status);
-			}
-
-			//Signal user.
-			wake_up_interruptible_all(&instance->wait_queue);
-		} else if (irq_status & ME4600_IRQ_STATUS_BIT_AI_HF) {
-			instance->ISM.read += ME4600_AI_FIFO_HALF;
-			instance->ISM.global_read += ME4600_AI_FIFO_HALF;
-
-			if (ai_read_data(instance, ME4600_AI_FIFO_HALF) != ME4600_AI_FIFO_HALF) {	//ERROR!
-				PERROR
-				    ("Limited amounts aqusition with TH != 0: Circular buffer full!\n");
-				ai_stop_isr(instance);
-
-				instance->status =
-				    ai_status_stream_buffer_error;
-				//Signal user.
-				wake_up_interruptible_all(&instance->
-							  wait_queue);
-			} else {
-				//Countinue.
-				ai_limited_ISM(instance, irq_status);
-			}
-		}
-
-		if (instance->ISM.global_read >= instance->data_required) {	//End of work. Next paranoid pice of code: '>=' instead od '==' only to be sure.
-			ai_stop_isr(instance);
-			if (instance->status < ai_status_stream_end) {
-				instance->status = ai_status_stream_end;
-			}
-#ifdef MEDEBUG_ERROR
-			if (instance->ISM.global_read > instance->data_required) {	//This is security check case. This should never ever happend!
-				PERROR
-				    ("Limited amounts aqusition: Read more data than necessary! data_required=%d < read=%d\n",
-				     instance->data_required,
-				     instance->ISM.global_read);
-				//Signal error (warning??).
-				instance->status = ai_status_stream_error;
-			}
-#endif
-		}
-	}
-}
-
-void ai_infinite_isr(me4600_ai_subdevice_t *instance,
-		     const uint32_t irq_status, const uint32_t ctrl_status)
-{
-	int to_read;
-
-	if (irq_status & ME4600_IRQ_STATUS_BIT_SC) {	//next chunck of data -> read fifo
-		//Set new state in ISM.
-		if ((instance->fifo_irq_threshold < ME4600_AI_FIFO_HALF) && (!(ctrl_status & ME4600_AI_STATUS_BIT_HF_DATA))) {	//There is more data than we ecpected. Propably we aren't fast enough. Read as many as possible.
-			if (instance->fifo_irq_threshold) {
-				to_read =
-				    ME4600_AI_FIFO_HALF -
-				    (ME4600_AI_FIFO_HALF %
-				     instance->fifo_irq_threshold);
-				if (to_read > instance->fifo_irq_threshold) {
-					PDEBUG
-					    ("Infinite aqusition: Not fast enough data aqusition! TH != 0: correction=%d\n",
-					     to_read);
-				}
-			} else {	//No threshold specified.
-				to_read = ME4600_AI_FIFO_HALF;
-			}
-		} else {
-			to_read = instance->ISM.next;
-		}
-
-		instance->ISM.read += to_read;
-
-		//Get data
-		if (ai_read_data(instance, to_read) != to_read) {	//ERROR!
-			PERROR("Infinite aqusition: Circular buffer full!\n");
-			ai_stop_isr(instance);
-			instance->status = ai_status_stream_buffer_error;
-		} else {
-			ai_infinite_ISM(instance);
-			instance->ISM.global_read += instance->ISM.read;
-			instance->ISM.read = 0;
-		}
-
-		//Signal data to user
-		wake_up_interruptible_all(&instance->wait_queue);
-	} else if (irq_status & ME4600_IRQ_STATUS_BIT_AI_HF) {	//fifo is half full -> read fifo       Large blocks only!
-		instance->ISM.read += ME4600_AI_FIFO_HALF;
-
-		if (ai_read_data(instance, ME4600_AI_FIFO_HALF) != ME4600_AI_FIFO_HALF) {	//ERROR!
-			PERROR("Infinite aqusition: Circular buffer full!\n");
-			ai_stop_isr(instance);
-			instance->status = ai_status_stream_buffer_error;
-
-			//Signal it.
-			wake_up_interruptible_all(&instance->wait_queue);
-		} else {
-			ai_infinite_ISM(instance);
-		}
-	}
-}
-
-static irqreturn_t me4600_ai_isr(int irq, void *dev_id)
-{				/// @note This is time critical function!
-	uint32_t irq_status;
-	uint32_t ctrl_status;
-	me4600_ai_subdevice_t *instance = dev_id;
-	//int to_read;
-
-	PDEBUG("executed. idx=0\n");
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	irq_status = inl(instance->irq_status_reg);
-	if (!
-	    (irq_status &
-	     (ME4600_IRQ_STATUS_BIT_AI_HF | ME4600_IRQ_STATUS_BIT_SC))) {
-#ifdef MEDEBUG_INFO
-		if ((irq_status & (ME4600_IRQ_STATUS_BIT_AI_HF | ME4600_IRQ_STATUS_BIT_SC | ME4600_IRQ_STATUS_BIT_LE)) == ME4600_IRQ_STATUS_BIT_LE) {	//This is security check case. LE is unused. This should never ever happend.
-			PINFO
-			    ("%ld Shared interrupt. %s(): irq_status_reg=LE_IRQ\n",
-			     jiffies, __func__);
-		} else {
-			PINFO
-			    ("%ld Shared interrupt. %s(): irq_status_reg=0x%04X\n",
-			     jiffies, __func__, irq_status);
-		}
-#endif
-		return IRQ_NONE;
-	}
-
-	if (!instance->circ_buf.buf) {	//Security check.
-		PERROR_CRITICAL("CIRCULAR BUFFER NOT EXISTS!\n");
-		ai_stop_isr(instance);
-		return IRQ_HANDLED;
-	}
-	//Get the status register.
-	ctrl_status = inl(instance->status_reg);
-
-#ifdef MEDEBUG_INFO
-	if (irq_status & ME4600_IRQ_STATUS_BIT_AI_HF)
-		PINFO("HF interrupt active\n");
-	if (irq_status & ME4600_IRQ_STATUS_BIT_SC)
-		PINFO("SC interrupt active\n");
-	if (irq_status & ME4600_IRQ_STATUS_BIT_LE)
-		PINFO("LE interrupt active\n");
-#endif
-
-	//This is safety check!
-	if ((irq_status & ME4600_IRQ_STATUS_BIT_AI_HF)
-	    && (ctrl_status & ME4600_AI_STATUS_BIT_HF_DATA)) {
-		PDEBUG("HF interrupt active but FIFO under half\n");
-		//Reset HF interrupt latch.
-		spin_lock(instance->ctrl_reg_lock);
-		outl(ctrl_status | ME4600_AI_CTRL_BIT_HF_IRQ_RESET,
-		     instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base,
-			   ctrl_status);
-		outl(ctrl_status, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base,
-			   ctrl_status);
-		spin_unlock(instance->ctrl_reg_lock);
-		return IRQ_HANDLED;
-	}
-#ifdef MEDEBUG_INFO
-	PINFO("STATUS_BIT_FSM=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_FSM) ? "on" : "off");
-
-	PINFO("STATUS_BIT_EF_CHANNEL=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_EF_CHANNEL) ? "not empty" :
-	      "empty");
-	PINFO("STATUS_BIT_HF_CHANNEL=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_HF_CHANNEL) ? " < HF" :
-	      " > HF");
-	PINFO("STATUS_BIT_FF_CHANNEL=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_FF_CHANNEL) ? "not full" :
-	      "full");
-
-	PINFO("STATUS_BIT_EF_DATA=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_EF_DATA) ? "not empty" :
-	      "empty");
-	PINFO("STATUS_BIT_HF_DATA=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_HF_DATA) ? " < HF" : " > HF");
-	PINFO("STATUS_BIT_FF_DATA=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_FF_DATA) ? "not full" :
-	      "full");
-
-	PINFO("CTRL_BIT_HF_IRQ=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_HF_IRQ) ? "enable" : "disable");
-	PINFO("CTRL_BIT_HF_IRQ_RESET=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_HF_IRQ_RESET) ? "reset" :
-	      "work");
-	PINFO("CTRL_BIT_SC_IRQ=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_SC_IRQ) ? "enable" : "disable");
-	PINFO("CTRL_BIT_SC_RELOAD=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_SC_RELOAD) ? "on" : "off");
-	PINFO("CTRL_BIT_SC_IRQ_RESET=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_SC_IRQ_RESET) ? "reset" :
-	      "work");
-#endif
-
-	//Look for overflow error.
-	if (!(ctrl_status & ME4600_AI_STATUS_BIT_FF_DATA)) {
-		//FIFO is full. Read datas and reset all settings.
-		PERROR("FIFO overflow.\n");
-		ai_read_data(instance, ME4600_AI_FIFO_COUNT);
-		ai_stop_isr(instance);
-
-		instance->status = ai_status_stream_fifo_error;
-		//Signal it.
-		wake_up_interruptible_all(&instance->wait_queue);
-
-		return IRQ_HANDLED;
-	}
-
-	if (!instance->data_required) {	//This is infinite aqusition.
-#ifdef MEDEBUG_ERROR
-		if ((irq_status &
-		     (ME4600_IRQ_STATUS_BIT_AI_HF | ME4600_IRQ_STATUS_BIT_SC))
-		    ==
-		    (ME4600_IRQ_STATUS_BIT_AI_HF | ME4600_IRQ_STATUS_BIT_SC)) {
-			///In infinite mode only one interrupt source should be reported!
-			PERROR
-			    ("Error in ISM! Infinite aqusition: HF and SC interrupts active! threshold=%d next=%d ctrl=0x%04X irq_status_reg=0x%04X",
-			     instance->fifo_irq_threshold, instance->ISM.next,
-			     ctrl_status, irq_status);
-		}
-#endif
-
-		ai_infinite_isr(instance, irq_status, ctrl_status);
-
-#ifdef MEDEBUG_INFO
-		ctrl_status = inl(instance->ctrl_reg);
-#endif
-	} else {
-
-		ai_limited_isr(instance, irq_status, ctrl_status);
-		ctrl_status = inl(instance->status_reg);
-		if (!(ctrl_status & (ME4600_AI_STATUS_BIT_HF_DATA | ME4600_AI_CTRL_BIT_HF_IRQ_RESET))) {	//HF active, but we have more than half already => HF will never come
-			PDEBUG
-			    ("MISSED HF. data_required=%d ISM.read=%d ISM.global=%d ISM.next=%d\n",
-			     instance->data_required, instance->ISM.read,
-			     instance->ISM.global_read, instance->ISM.next);
-			ai_limited_isr(instance, ME4600_IRQ_STATUS_BIT_AI_HF,
-				       ctrl_status);
-		}
-	}
-
-#ifdef MEDEBUG_INFO
-	PINFO("STATUS_BIT_FSM=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_FSM) ? "on" : "off");
-
-	PINFO("STATUS_BIT_EF_CHANNEL=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_EF_CHANNEL) ? "not empty" :
-	      "empty");
-	PINFO("STATUS_BIT_HF_CHANNEL=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_HF_CHANNEL) ? " < HF" :
-	      " > HF");
-	PINFO("STATUS_BIT_FF_CHANNEL=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_FF_CHANNEL) ? "not full" :
-	      "full");
-
-	PINFO("STATUS_BIT_EF_DATA=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_EF_DATA) ? "not empty" :
-	      "empty");
-	PINFO("STATUS_BIT_HF_DATA=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_HF_DATA) ? " < HF" : " > HF");
-	PINFO("STATUS_BIT_FF_DATA=%s.\n",
-	      (ctrl_status & ME4600_AI_STATUS_BIT_FF_DATA) ? "not full" :
-	      "full");
-
-	PINFO("CTRL_BIT_HF_IRQ_RESET=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_HF_IRQ_RESET) ? "reset" :
-	      "work");
-	PINFO("CTRL_BIT_SC_IRQ=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_SC_IRQ) ? "enable" : "disable");
-	PINFO("CTRL_BIT_SC_RELOAD=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_SC_RELOAD) ? "on" : "off");
-	PINFO("CTRL_BIT_SC_IRQ_RESET=%s.\n",
-	      (ctrl_status & ME4600_AI_CTRL_BIT_SC_IRQ_RESET) ? "reset" :
-	      "work");
-	PINFO("%ld END\n", jiffies);
-#endif
-
-	return IRQ_HANDLED;
-}
-
-/** @brief Stop aqusation of data. Reset interrupts' laches. Clear data's FIFO.
-*
-* @param instance The subdevice instance (pointer).
-*/
-inline void ai_stop_isr(me4600_ai_subdevice_t *instance)
-{				/// @note This is soft time critical function!
-	register uint32_t tmp;
-
-	spin_lock(instance->ctrl_reg_lock);
-	//Stop all. Reset interrupt laches. Reset data FIFO.
-	tmp = inl(instance->ctrl_reg);
-	tmp |=
-	    (ME4600_AI_CTRL_BIT_IMMEDIATE_STOP | ME4600_AI_CTRL_BIT_HF_IRQ_RESET
-	     | ME4600_AI_CTRL_BIT_LE_IRQ_RESET |
-	     ME4600_AI_CTRL_BIT_SC_IRQ_RESET);
-	tmp &= ~ME4600_AI_CTRL_BIT_DATA_FIFO;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->ctrl_reg_lock);
-}
-
-/** @brief Copy data from fifo to circular buffer.
-*
-* @param instance The subdevice instance (pointer).
-* @param count The number of requested data.
-*
-* @return On success: Number of copied values.
-* @return On error: -ME_ERRNO_RING_BUFFER_OVERFLOW.
-*/
-static inline int ai_read_data(me4600_ai_subdevice_t *instance,
-			       const int count)
-{				/// @note This is time critical function!
-	int c = count;
-	int empty_space;
-	int copied = 0;
-	int i, j;
-
-	empty_space = me_circ_buf_space_to_end(&instance->circ_buf);
-	if (empty_space <= 0) {
-		PDEBUG("Circular buffer full.\n");
-		return -ME_ERRNO_RING_BUFFER_OVERFLOW;
-	}
-
-	if (empty_space < c) {	//Copy first part. Max to end of buffer.
-		PDEBUG
-		    ("Try to copy %d values from FIFO to circular buffer (pass 1).\n",
-		     empty_space);
-		for (i = 0; i < empty_space; i++) {
-			*(instance->circ_buf.buf + instance->circ_buf.head) =
-			    (inw(instance->data_reg) ^ 0x8000);
-			instance->circ_buf.head++;
-		}
-		instance->circ_buf.head &= instance->circ_buf.mask;
-		c -= empty_space;
-		copied = empty_space;
-
-		empty_space = me_circ_buf_space_to_end(&instance->circ_buf);
-	}
-
-	if (empty_space > 0) {
-		j = (empty_space < c) ? empty_space : c;
-		PDEBUG
-		    ("Try to copy %d values from FIFO to circular buffer (pass 2).\n",
-		     c);
-		for (i = 0; i < j; i++) {
-			*(instance->circ_buf.buf + instance->circ_buf.head) =
-			    (inw(instance->data_reg) ^ 0x8000);
-			instance->circ_buf.head++;
-		}
-		instance->circ_buf.head &= instance->circ_buf.mask;
-		copied += j;
-	}
-	return copied;
-}
-
-inline void ai_infinite_ISM(me4600_ai_subdevice_t *instance)
-{				/// @note This is time critical function!
-	register volatile uint32_t ctrl_set, ctrl_reset, tmp;
-
-	if (instance->fifo_irq_threshold < ME4600_AI_FIFO_MAX_SC) {	// Only sample counter with reloadnig is working. Reset it.
-		PINFO
-		    ("Only sample counter with reloadnig is working. Reset it.\n");
-		ctrl_set = ME4600_AI_CTRL_BIT_SC_IRQ_RESET;
-		ctrl_reset = ~ME4600_AI_CTRL_BIT_SC_IRQ_RESET;
-	} else if (instance->fifo_irq_threshold == instance->ISM.read) {	//This is SC interrupt for large block. The whole section is done. Reset SC_IRQ an HF_IRQ and start everything again from beginning.
-		PINFO
-		    ("This is SC interrupt for large block. The whole section is done. Reset SC_IRQ an HF_IRQ and start everything again from beginning.\n");
-		ctrl_set =
-		    ME4600_AI_CTRL_BIT_SC_IRQ_RESET |
-		    ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-		ctrl_reset =
-		    ~(ME4600_AI_CTRL_BIT_SC_IRQ_RESET |
-		      ME4600_AI_CTRL_BIT_HF_IRQ_RESET);
-	} else if (instance->fifo_irq_threshold >= (ME4600_AI_FIFO_MAX_SC + instance->ISM.read)) {	//This is HF interrupt for large block.The next interrupt should be from HF, also. Reset HF.
-		PINFO
-		    ("This is HF interrupt for large block.The next interrupt should be from HF, also. Reset HF.\n");
-		ctrl_set = ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-		ctrl_reset = ~ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-	} else {		//This is HF interrupt for large block.The next interrupt should be from SC. Don't reset HF!
-		PINFO
-		    ("This is HF interrupt for large block.The next interrupt should be from SC. Don't reset HF!\n");
-		ctrl_set = ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-		ctrl_reset = 0xFFFFFFFF;
-	}
-
-	//Reset interrupt latch.
-	spin_lock(instance->ctrl_reg_lock);
-	tmp = inl(instance->ctrl_reg);
-	PINFO("ctrl=0x%x ctrl_set=0x%x ctrl_reset=0x%x\n", tmp, ctrl_set,
-	      ctrl_reset);
-	tmp |= ctrl_set;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	if (ctrl_reset != 0xFFFFFFFF) {
-		outl(tmp & ctrl_reset, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reset outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base,
-			   tmp & ctrl_reset);
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-
-}
-
-inline void ai_limited_ISM(me4600_ai_subdevice_t *instance,
-			   uint32_t irq_status)
-{				/// @note This is time critical function!
-	register volatile uint32_t ctrl_set, ctrl_reset = 0xFFFFFFFF, tmp;
-
-	if (!instance->fifo_irq_threshold) {	//No threshold provided. SC ends work.
-		PINFO("No threshold provided. SC ends work.\n");
-		ctrl_set = ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-		if (instance->data_required > (ME4600_AI_FIFO_COUNT - 1 + instance->ISM.global_read)) {	//HF need reseting.
-			ctrl_reset &= ~ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-		}
-	} else			//if(instance->fifo_irq_threshold)
-	{
-		if (irq_status & ME4600_IRQ_STATUS_BIT_AI_HF) {
-			PINFO("Threshold provided. Clear HF latch.\n");
-			ctrl_set = ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-
-			if (instance->fifo_irq_threshold >= (ME4600_AI_FIFO_MAX_SC + instance->ISM.read)) {	//This is not the last one. HF need reseting.
-				PINFO
-				    ("The next interrupt is HF. HF need be activating.\n");
-				ctrl_reset = ~ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-			}
-		}
-
-		if (irq_status & ME4600_IRQ_STATUS_BIT_SC) {
-			PINFO("Threshold provided. Restart SC.\n");
-			ctrl_set = ME4600_AI_CTRL_BIT_SC_IRQ_RESET;
-			ctrl_reset &= ~ME4600_AI_CTRL_BIT_SC_IRQ_RESET;
-
-			if (instance->fifo_irq_threshold >= ME4600_AI_FIFO_MAX_SC) {	//This is not the last one. HF need to be activating.
-				PINFO
-				    ("The next interrupt is HF. HF need to be activating.\n");
-				ctrl_reset &= ~ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-			}
-		}
-	}
-
-	//Reset interrupt latch.
-	spin_lock(instance->ctrl_reg_lock);
-	tmp = inl(instance->ctrl_reg);
-	tmp |= ctrl_set;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	if (ctrl_reset != 0xFFFFFFFF) {
-		outl(tmp & ctrl_reset, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base,
-			   tmp & ctrl_reset);
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-
-}
-
-/** @brief Last chunck of datas. We must reschedule sample counter.
-*	@note Last chunck.
-*	Leaving SC_RELOAD doesn't do any harm, but in some bad case can make extra interrupts.
-*	@warning When threshold is wrongly set some IRQ are lost.(!!!)
-*/
-inline void ai_reschedule_SC(me4600_ai_subdevice_t *instance)
-{
-	register uint32_t rest;
-
-	if (instance->data_required <= instance->ISM.global_read)
-		return;
-
-	rest = instance->data_required - instance->ISM.global_read;
-	if (rest < instance->fifo_irq_threshold) {	//End of work soon ....
-		PDEBUG("Rescheduling SC from %d to %d.\n",
-		       instance->fifo_irq_threshold, rest);
-		/// @note Write new value to SC <==  DANGER! This is not safe solution! We can miss some inputs.
-		outl(rest, instance->sample_counter_reg);
-		PDEBUG_REG("sample_counter_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->sample_counter_reg - instance->reg_base,
-			   rest);
-		instance->fifo_irq_threshold = rest;
-
-		if (rest < ME4600_AI_FIFO_MAX_SC) {
-			instance->ISM.next = rest;
-		} else {
-			instance->ISM.next = rest % ME4600_AI_FIFO_HALF;
-			if (instance->ISM.next + ME4600_AI_FIFO_HALF <
-			    ME4600_AI_FIFO_MAX_SC) {
-				instance->ISM.next += ME4600_AI_FIFO_HALF;
-			}
-		}
-	}
-}
-
-/** Start the ISM. All must be reseted before enter to this function. */
-inline void ai_data_acquisition_logic(me4600_ai_subdevice_t *instance)
-{
-	register uint32_t tmp;
-
-	if (!instance->data_required) {	//This is infinite aqusition.
-		if (!instance->fifo_irq_threshold) {	//No threshold provided. Set SC to 0.5*FIFO. Clear the SC's latch.
-			//Set the sample counter
-			outl(ME4600_AI_FIFO_HALF, instance->sample_counter_reg);
-			PDEBUG_REG
-			    ("sample_counter_reg outl(0x%lX+0x%lX)=0x%x\n",
-			     instance->reg_base,
-			     instance->sample_counter_reg - instance->reg_base,
-			     ME4600_AI_FIFO_HALF);
-		} else {	//Threshold provided. Set SC to treshold. Clear the SC's latch.
-			//Set the sample counter
-			outl(instance->fifo_irq_threshold,
-			     instance->sample_counter_reg);
-			PDEBUG_REG
-			    ("sample_counter_reg outl(0x%lX+0x%lX)=0x%x\n",
-			     instance->reg_base,
-			     instance->sample_counter_reg - instance->reg_base,
-			     instance->fifo_irq_threshold);
-		}
-
-		if (instance->fifo_irq_threshold < ME4600_AI_FIFO_MAX_SC) {	//Enable only sample counter's interrupt. Set reload bit. Clear the SC's latch.
-			spin_lock(instance->ctrl_reg_lock);
-			tmp = inl(instance->ctrl_reg);
-			tmp |= ME4600_AI_CTRL_BIT_SC_RELOAD;
-			tmp &= ~ME4600_AI_CTRL_BIT_SC_IRQ_RESET;
-			outl(tmp, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   tmp);
-			spin_unlock(instance->ctrl_reg_lock);
-			if (!instance->fifo_irq_threshold) {	//No threshold provided. Set ISM.next to 0.5*FIFO.
-				instance->ISM.next = ME4600_AI_FIFO_HALF;
-			} else {	//Threshold provided. Set ISM.next to treshold.
-				instance->ISM.next =
-				    instance->fifo_irq_threshold;
-			}
-		} else {	//Enable sample counter's and HF's interrupts.
-			spin_lock(instance->ctrl_reg_lock);
-			tmp = inl(instance->ctrl_reg);
-			tmp |= ME4600_AI_CTRL_BIT_SC_RELOAD;
-			tmp &=
-			    ~(ME4600_AI_CTRL_BIT_SC_IRQ_RESET |
-			      ME4600_AI_CTRL_BIT_HF_IRQ_RESET);
-			outl(tmp, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   tmp);
-			spin_unlock(instance->ctrl_reg_lock);
-
-			instance->ISM.next =
-			    instance->fifo_irq_threshold % ME4600_AI_FIFO_HALF;
-			if (instance->ISM.next + ME4600_AI_FIFO_HALF <
-			    ME4600_AI_FIFO_MAX_SC) {
-				instance->ISM.next += ME4600_AI_FIFO_HALF;
-			}
-		}
-	} else {		//This aqusition is limited to set number of data.
-		if (instance->fifo_irq_threshold >= instance->data_required) {	//Stupid situation.
-			instance->fifo_irq_threshold = 0;
-			PDEBUG
-			    ("Stupid situation: data_required(%d) < threshold(%d).\n",
-			     instance->fifo_irq_threshold,
-			     instance->data_required);
-		}
-
-		if (!instance->fifo_irq_threshold) {	//No threshold provided. Easy case: HF=read and SC=end.
-			//Set the sample counter to data_required.
-			outl(instance->data_required,
-			     instance->sample_counter_reg);
-			PDEBUG_REG
-			    ("sample_counter_reg outl(0x%lX+0x%lX)=0x%x\n",
-			     instance->reg_base,
-			     instance->sample_counter_reg - instance->reg_base,
-			     instance->data_required);
-
-			//Reset the latches of sample counter and HF (if SC>FIFO).
-			//No SC reload!
-			spin_lock(instance->ctrl_reg_lock);
-			tmp = inl(instance->ctrl_reg);
-			tmp &=
-			    ~(ME4600_AI_CTRL_BIT_SC_IRQ_RESET |
-			      ME4600_AI_CTRL_BIT_SC_RELOAD);
-			if (instance->data_required >
-			    (ME4600_AI_FIFO_COUNT - 1)) {
-				tmp &= ~ME4600_AI_CTRL_BIT_HF_IRQ_RESET;
-				instance->ISM.next =
-				    instance->data_required %
-				    ME4600_AI_FIFO_HALF;
-				instance->ISM.next += ME4600_AI_FIFO_HALF;
-
-			} else {
-				instance->ISM.next = instance->data_required;
-			}
-			outl(tmp, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   tmp);
-			spin_unlock(instance->ctrl_reg_lock);
-
-		} else {	//The most general case. We have concret numbe of required data and threshold. SC=TH
-			//Set the sample counter to threshold.
-			outl(instance->fifo_irq_threshold,
-			     instance->sample_counter_reg);
-			PDEBUG_REG
-			    ("sample_counter_reg outl(0x%lX+0x%lX)=0x%x\n",
-			     instance->reg_base,
-			     instance->sample_counter_reg - instance->reg_base,
-			     instance->fifo_irq_threshold);
-
-			spin_lock(instance->ctrl_reg_lock);
-			tmp = inl(instance->ctrl_reg);
-			//In this moment we are sure that SC will come more than once.
-			tmp |= ME4600_AI_CTRL_BIT_SC_RELOAD;
-
-			if (instance->fifo_irq_threshold < ME4600_AI_FIFO_MAX_SC) {	//The threshold is so small that we do need HF.
-				tmp &= ~ME4600_AI_CTRL_BIT_SC_IRQ_RESET;
-				instance->ISM.next =
-				    instance->fifo_irq_threshold;
-			} else {	//The threshold is large. The HF must be use.
-				tmp &=
-				    ~(ME4600_AI_CTRL_BIT_SC_IRQ_RESET |
-				      ME4600_AI_CTRL_BIT_HF_IRQ_RESET);
-				instance->ISM.next =
-				    instance->fifo_irq_threshold %
-				    ME4600_AI_FIFO_HALF;
-				if (instance->ISM.next + ME4600_AI_FIFO_HALF <
-				    ME4600_AI_FIFO_MAX_SC) {
-					instance->ISM.next +=
-					    ME4600_AI_FIFO_HALF;
-				}
-			}
-			outl(tmp, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   tmp);
-			spin_unlock(instance->ctrl_reg_lock);
-		}
-	}
-}
-
-static int ai_mux_toggler(me4600_ai_subdevice_t *instance)
-{
-	uint32_t tmp;
-
-	PDEBUG("executed. idx=0\n");
-
-	outl(0, instance->scan_pre_timer_low_reg);
-	PDEBUG_REG("scan_pre_timer_low_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_pre_timer_low_reg - instance->reg_base, 0);
-	outl(0, instance->scan_pre_timer_high_reg);
-	PDEBUG_REG("scan_pre_timer_high_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_pre_timer_high_reg - instance->reg_base, 0);
-	outl(0, instance->scan_timer_low_reg);
-	PDEBUG_REG("scan_timer_low_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_timer_low_reg - instance->reg_base, 0);
-	outl(0, instance->scan_timer_high_reg);
-	PDEBUG_REG("scan_timer_high_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->scan_timer_high_reg - instance->reg_base, 0);
-	outl(65, instance->chan_timer_reg);
-	PDEBUG_REG("chan_timer_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->chan_timer_reg - instance->reg_base, 65);
-	outl(65, instance->chan_pre_timer_reg);
-	PDEBUG_REG("chan_pre_timer_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->chan_pre_timer_reg - instance->reg_base, 65);
-
-	// Turn on internal reference.
-	tmp = inl(instance->ctrl_reg);
-	tmp |= ME4600_AI_CTRL_BIT_FULLSCALE;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	// Clear data and channel fifo.
-	tmp &=
-	    ~(ME4600_AI_CTRL_BIT_CHANNEL_FIFO | ME4600_AI_CTRL_BIT_DATA_FIFO);
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	tmp |= ME4600_AI_CTRL_BIT_CHANNEL_FIFO | ME4600_AI_CTRL_BIT_DATA_FIFO;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	// Write channel entry.
-	outl(ME4600_AI_LIST_INPUT_DIFFERENTIAL |
-	     ME4600_AI_LIST_RANGE_UNIPOLAR_2_5 | 31,
-	     instance->channel_list_reg);
-	PDEBUG_REG("channel_list_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->channel_list_reg - instance->reg_base,
-		   ME4600_AI_LIST_INPUT_DIFFERENTIAL |
-		   ME4600_AI_LIST_RANGE_UNIPOLAR_2_5 | 31);
-
-	// Start conversion.
-	inl(instance->start_reg);
-	PDEBUG_REG("start_reg inl(0x%lX+0x%lX)\n", instance->reg_base,
-		   instance->start_reg - instance->reg_base);
-	udelay(10);
-
-	// Clear data and channel fifo.
-	tmp &=
-	    ~(ME4600_AI_CTRL_BIT_CHANNEL_FIFO | ME4600_AI_CTRL_BIT_DATA_FIFO);
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	tmp |= ME4600_AI_CTRL_BIT_CHANNEL_FIFO | ME4600_AI_CTRL_BIT_DATA_FIFO;
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	// Write channel entry.
-	// ME4600_AI_LIST_INPUT_SINGLE_ENDED | ME4600_AI_LIST_RANGE_BIPOLAR_10 <= 0x0000
-	outl(ME4600_AI_LIST_INPUT_SINGLE_ENDED |
-	     ME4600_AI_LIST_RANGE_BIPOLAR_10, instance->channel_list_reg);
-	PDEBUG_REG("channel_list_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->channel_list_reg - instance->reg_base,
-		   ME4600_AI_LIST_INPUT_SINGLE_ENDED |
-		   ME4600_AI_LIST_RANGE_BIPOLAR_10);
-
-	// Start conversion.
-	inl(instance->start_reg);
-	PDEBUG_REG("start_reg inl(0x%lX+0x%lX)\n", instance->reg_base,
-		   instance->start_reg - instance->reg_base);
-	udelay(10);
-
-	// Clear control register.
-	tmp &= (ME4600_AI_CTRL_BIT_EX_IRQ | ME4600_AI_CTRL_BIT_EX_IRQ_RESET);
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-/** @brief Copy rest of data from fifo to circular buffer.
-* @note Helper for STOP command. After FSM is stopped.
-* @note This is slow function that copy all remainig data from FIFO to buffer.
-*
-* @param instance The subdevice instance (pointer).
-*
-* @return On success: Number of copied values.
-* @return On error: Negative error code -ME_ERRNO_RING_BUFFER_OVERFLOW.
-*/
-static inline int ai_read_data_pooling(me4600_ai_subdevice_t *instance)
-{				/// @note This is time critical function!
-	int empty_space;
-	int copied = 0;
-	int status = ME_ERRNO_SUCCESS;
-
-	PDEBUG("Space left in circular buffer = %d.\n",
-	       me_circ_buf_space(&instance->circ_buf));
-
-	while ((empty_space = me_circ_buf_space(&instance->circ_buf))) {
-		if (!(status = inl(instance->status_reg) & ME4600_AI_STATUS_BIT_EF_DATA)) {	//No more data. status = ME_ERRNO_SUCCESS = 0
-			break;
-		}
-		*(instance->circ_buf.buf + instance->circ_buf.head) =
-		    (inw(instance->data_reg) ^ 0x8000);
-		instance->circ_buf.head++;
-		instance->circ_buf.head &= instance->circ_buf.mask;
-	}
-
-#ifdef MEDEBUG_ERROR
-	if (!status)
-		PDEBUG
-		    ("Copied all remaining datas (%d) from FIFO to circular buffer.\n",
-		     copied);
-	else {
-		PDEBUG("No more empty space in buffer.\n");
-		PDEBUG("Copied %d datas from FIFO to circular buffer.\n",
-		       copied);
-		PDEBUG("FIFO still not empty.\n");
-	}
-#endif
-	return (!status) ? copied : -ME_ERRNO_RING_BUFFER_OVERFLOW;
-}
-
-static void me4600_ai_work_control_task(struct work_struct *work)
-{
-	me4600_ai_subdevice_t *instance;
-	uint32_t status;
-	uint32_t ctrl;
-	unsigned long cpu_flags = 0;
-	int reschedule = 0;
-	int signaling = 0;
-
-	instance =
-	    container_of((void *)work, me4600_ai_subdevice_t, ai_control_task);
-	PINFO("<%s: %ld> executed.\n", __func__, jiffies);
-
-	status = inl(instance->status_reg);
-	PDEBUG_REG("status_reg inl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->status_reg - instance->reg_base, status);
-
-	switch (instance->status) {	// Checking actual mode.
-		// Not configured for work.
-	case ai_status_none:
-		break;
-
-		//This are stable modes. No need to do anything. (?)
-	case ai_status_single_configured:
-	case ai_status_stream_configured:
-	case ai_status_stream_fifo_error:
-	case ai_status_stream_buffer_error:
-	case ai_status_stream_error:
-		PERROR("Shouldn't be running!.\n");
-		break;
-
-		// Stream modes
-	case ai_status_stream_run_wait:
-		if (status & ME4600_AI_STATUS_BIT_FSM) {	// ISM started..
-			instance->status = ai_status_stream_run;
-			// Signal the end of wait for start.
-			signaling = 1;
-			// Wait now for stop.
-			reschedule = 1;
-			break;
-
-			// Check timeout.
-			if ((instance->timeout.delay) && ((jiffies - instance->timeout.start_time) >= instance->timeout.delay)) {	// Timeout
-				PDEBUG("Timeout reached.\n");
-				// Stop all actions. No conditions! Block interrupts. Reset FIFO => Too late!
-				ai_stop_isr(instance);
-
-				instance->status = ai_status_stream_end;
-
-				// Signal the end.
-				signaling = 1;
-			}
-		}
-		break;
-
-	case ai_status_stream_run:
-		// Wait for stop ISM.
-		reschedule = 1;
-		break;
-
-	case ai_status_stream_end_wait:
-		if (!(status & ME4600_AI_STATUS_BIT_FSM)) {	// ISM stoped. Overwrite ISR.
-			instance->status = ai_status_stream_end;
-			// Signal the end of wait for stop.
-			signaling = 1;
-		} else {
-			// Wait for stop ISM.
-			reschedule = 1;
-		}
-		break;
-
-	case ai_status_stream_end:
-		//End work.
-		if (status & ME4600_AI_STATUS_BIT_FSM) {	// Still working? Stop it!
-			PERROR
-			    ("Status is 'ai_status_stream_end' but hardware is still working!\n");
-			spin_lock_irqsave(instance->ctrl_reg_lock, cpu_flags);
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |=
-			    (ME4600_AI_CTRL_BIT_IMMEDIATE_STOP |
-			     ME4600_AI_CTRL_BIT_HF_IRQ_RESET |
-			     ME4600_AI_CTRL_BIT_SC_IRQ_RESET);
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(instance->ctrl_reg_lock,
-					       cpu_flags);
-		}
-		break;
-
-	default:
-		PERROR_CRITICAL("Status is in wrong state (%d)!\n",
-				instance->status);
-		instance->status = ai_status_stream_error;
-		// Signal the end.
-		signaling = 1;
-		break;
-
-	}
-
-	if (signaling) {	//Signal it.
-		wake_up_interruptible_all(&instance->wait_queue);
-	}
-
-	if (instance->ai_control_task_flag && reschedule) {	// Reschedule task
-		queue_delayed_work(instance->me4600_workqueue,
-				   &instance->ai_control_task, 1);
-	} else {
-		PINFO("<%s> Ending control task.\n", __func__);
-	}
-
-}
diff --git a/drivers/staging/meilhaus/me4600_ai.h b/drivers/staging/meilhaus/me4600_ai.h
deleted file mode 100644
index 7055e44..0000000
--- a/drivers/staging/meilhaus/me4600_ai.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/**
- * @file me4600_ai.h
- *
- * @brief Meilhaus ME-4000 analog input subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke  (k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_AI_H_
-#define _ME4600_AI_H_
-
-#include "mesubdevice.h"
-#include "meioctl.h"
-#include "mecirc_buf.h"
-
-#ifdef __KERNEL__
-
-#define ME4600_AI_MAX_DATA				0xFFFF
-
-#ifdef ME_SYNAPSE
-# define ME4600_AI_CIRC_BUF_SIZE_ORDER	8	// 2^n PAGES =>> Maximum value of 1MB for Synapse
-#else
-# define ME4600_AI_CIRC_BUF_SIZE_ORDER	5	// 2^n PAGES =>> 128KB
-#endif
-#define ME4600_AI_CIRC_BUF_SIZE 		PAGE_SIZE<<ME4600_AI_CIRC_BUF_SIZE_ORDER	// Buffer size in bytes.
-
-#ifdef _CBUFF_32b_t
-# define ME4600_AI_CIRC_BUF_COUNT		((ME4600_AI_CIRC_BUF_SIZE) / sizeof(uint32_t))	// Size in values
-#else
-# define ME4600_AI_CIRC_BUF_COUNT		((ME4600_AI_CIRC_BUF_SIZE) / sizeof(uint16_t))	// Size in values
-#endif
-
-#define ME4600_AI_FIFO_HALF				1024	//ME4600_AI_FIFO_COUNT/2                //1024
-#define ME4600_AI_FIFO_MAX_SC			1352	//0.66*ME4600_AI_FIFO_COUNT             //1352
-
-typedef enum ME4600_AI_STATUS {
-	ai_status_none = 0,
-	ai_status_single_configured,
-	ai_status_stream_configured,
-	ai_status_stream_run_wait,
-	ai_status_stream_run,
-	ai_status_stream_end_wait,
-	ai_status_stream_end,
-	ai_status_stream_fifo_error,
-	ai_status_stream_buffer_error,
-	ai_status_stream_error,
-	ai_status_last
-} ME4600_AI_STATUS;
-
-typedef struct me4600_single_config_entry {
-	unsigned short status;
-	uint32_t entry;
-	uint32_t ctrl;
-} me4600_single_config_entry_t;
-
-typedef struct me4600_range_entry {
-	int min;
-	int max;
-} me4600_range_entry_t;
-
-typedef struct me4600_ai_ISM {
-	volatile unsigned int global_read;				/**< The number of data read in total. */
-	volatile unsigned int read;						/**< The number of data read for this chunck. */
-	volatile unsigned int next;						/**< The number of data request by user. */
-} me4600_ai_ISM_t;
-
-typedef struct me4600_ai_timeout {
-	unsigned long start_time;
-	unsigned long delay;
-} me4600_ai_timeout_t;
-
-/**
- * @brief The ME-4000 analog input subdevice class.
- */
-typedef struct me4600_ai_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;							/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;						/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;						/**< Spin lock to protect #ctrl_reg from concurrent access. */
-
-	/* Hardware feautres */
-	unsigned int irq;								/**< The interrupt request number assigned by the PCI BIOS. */
-	int isolated;									/**< Marks if this subdevice is on an optoisolated device. */
-	int sh;											/**< Marks if this subdevice has sample and hold devices. */
-
-	unsigned int channels;							/**< The number of channels available on this subdevice. */
-	me4600_single_config_entry_t single_config[32];	/**< The configuration set for single acquisition. */
-
-	unsigned int data_required;						/**< The number of data request by user. */
-	unsigned int fifo_irq_threshold;				/**< The user adjusted FIFO high water interrupt level. */
-	unsigned int chan_list_len;						/**< The length of the user defined channel list. */
-
-	me4600_ai_ISM_t ISM;							/**< The information request by Interrupt-State-Machine. */
-	volatile enum ME4600_AI_STATUS status;			/**< The current stream status flag. */
-	me4600_ai_timeout_t timeout;					/**< The timeout for start in blocking and non-blocking mode. */
-
-											/* Registers *//**< All registers are 32 bits long. */
-	unsigned long ctrl_reg;
-	unsigned long status_reg;
-	unsigned long channel_list_reg;
-	unsigned long data_reg;
-	unsigned long chan_timer_reg;
-	unsigned long chan_pre_timer_reg;
-	unsigned long scan_timer_low_reg;
-	unsigned long scan_timer_high_reg;
-	unsigned long scan_pre_timer_low_reg;
-	unsigned long scan_pre_timer_high_reg;
-	unsigned long start_reg;
-	unsigned long irq_status_reg;
-	unsigned long sample_counter_reg;
-
-	unsigned int ranges_len;
-	me4600_range_entry_t ranges[4];					/**< The ranges available on this subdevice. */
-
-	/* Software buffer */
-	me_circ_buf_t circ_buf;							/**< Circular buffer holding measurment data. */
-	wait_queue_head_t wait_queue;					/**< Wait queue to put on tasks waiting for data to arrive. */
-
-	struct workqueue_struct *me4600_workqueue;
-	struct delayed_work ai_control_task;
-
-	volatile int ai_control_task_flag;				/**< Flag controling reexecuting of control task */
-
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me4600_ai_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-4000 analog input subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param channels The number of analog input channels available on this subdevice.
- * @param channels The number of analog input ranges available on this subdevice.
- * @param isolated Flag indicating if this device is opto isolated.
- * @param sh Flag indicating if sample and hold devices are available.
- * @param irq The irq number assigned by PCI BIOS.
- * @param ctrl_reg_lock Pointer to spin lock protecting the control register from concurrent access.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me4600_ai_subdevice_t *me4600_ai_constructor(uint32_t reg_base,
-					     unsigned int channels,
-					     unsigned int ranges,
-					     int isolated,
-					     int sh,
-					     int irq,
-					     spinlock_t * ctrl_reg_lock,
-					     struct workqueue_struct
-					     *me4600_wq);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_ai_reg.h b/drivers/staging/meilhaus/me4600_ai_reg.h
deleted file mode 100644
index 083fac7..0000000
--- a/drivers/staging/meilhaus/me4600_ai_reg.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/**
- * @file me4600_ai_reg.h
- *
- * @brief ME-4000 analog input subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_AI_REG_H_
-#define _ME4600_AI_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME4600_AI_CTRL_REG					0x74	// _/W
-#define ME4600_AI_STATUS_REG				0x74	// R/_
-#define ME4600_AI_CHANNEL_LIST_REG			0x78	// _/W
-#define ME4600_AI_DATA_REG					0x7C	// R/_
-#define ME4600_AI_CHAN_TIMER_REG			0x80	// _/W
-#define ME4600_AI_CHAN_PRE_TIMER_REG		0x84	// _/W
-#define ME4600_AI_SCAN_TIMER_LOW_REG		0x88	// _/W
-#define ME4600_AI_SCAN_TIMER_HIGH_REG		0x8C	// _/W
-#define ME4600_AI_SCAN_PRE_TIMER_LOW_REG	0x90	// _/W
-#define ME4600_AI_SCAN_PRE_TIMER_HIGH_REG	0x94	// _/W
-#define ME4600_AI_START_REG					0x98	// R/_
-
-#define ME4600_AI_SAMPLE_COUNTER_REG		0xC0	// _/W
-
-#define ME4600_AI_CTRL_BIT_MODE_0			0x00000001
-#define ME4600_AI_CTRL_BIT_MODE_1			0x00000002
-#define ME4600_AI_CTRL_BIT_MODE_2			0x00000004
-#define ME4600_AI_CTRL_BIT_SAMPLE_HOLD		0x00000008
-#define ME4600_AI_CTRL_BIT_IMMEDIATE_STOP	0x00000010
-#define ME4600_AI_CTRL_BIT_STOP				0x00000020
-#define ME4600_AI_CTRL_BIT_CHANNEL_FIFO		0x00000040
-#define ME4600_AI_CTRL_BIT_DATA_FIFO		0x00000080
-#define ME4600_AI_CTRL_BIT_FULLSCALE		0x00000100
-#define ME4600_AI_CTRL_BIT_OFFSET			0x00000200
-#define ME4600_AI_CTRL_BIT_EX_TRIG_ANALOG	0x00000400
-#define ME4600_AI_CTRL_BIT_EX_TRIG			0x00000800
-#define ME4600_AI_CTRL_BIT_EX_TRIG_FALLING	0x00001000
-#define ME4600_AI_CTRL_BIT_EX_IRQ			0x00002000
-#define ME4600_AI_CTRL_BIT_EX_IRQ_RESET		0x00004000
-#define ME4600_AI_CTRL_BIT_LE_IRQ			0x00008000
-#define ME4600_AI_CTRL_BIT_LE_IRQ_RESET		0x00010000
-#define ME4600_AI_CTRL_BIT_HF_IRQ			0x00020000
-#define ME4600_AI_CTRL_BIT_HF_IRQ_RESET		0x00040000
-#define ME4600_AI_CTRL_BIT_SC_IRQ			0x00080000
-#define ME4600_AI_CTRL_BIT_SC_IRQ_RESET		0x00100000
-#define ME4600_AI_CTRL_BIT_SC_RELOAD		0x00200000
-#define ME4600_AI_CTRL_BIT_EX_TRIG_BOTH		0x80000000
-
-#define ME4600_AI_STATUS_BIT_EF_CHANNEL		0x00400000
-#define ME4600_AI_STATUS_BIT_HF_CHANNEL		0x00800000
-#define ME4600_AI_STATUS_BIT_FF_CHANNEL		0x01000000
-#define ME4600_AI_STATUS_BIT_EF_DATA		0x02000000
-#define ME4600_AI_STATUS_BIT_HF_DATA		0x04000000
-#define ME4600_AI_STATUS_BIT_FF_DATA		0x08000000
-#define ME4600_AI_STATUS_BIT_LE				0x10000000
-#define ME4600_AI_STATUS_BIT_FSM			0x20000000
-
-#define ME4600_AI_CTRL_RPCI_FIFO			0x40000000	//Always set to zero!
-
-#define ME4600_AI_BASE_FREQUENCY			33E6
-
-#define ME4600_AI_MIN_ACQ_TICKS				66LL
-#define ME4600_AI_MAX_ACQ_TICKS				0xFFFFFFFFLL
-
-#define ME4600_AI_MIN_SCAN_TICKS			66LL
-#define ME4600_AI_MAX_SCAN_TICKS			0xFFFFFFFFFLL
-
-#define ME4600_AI_MIN_CHAN_TICKS			66LL
-#define ME4600_AI_MAX_CHAN_TICKS			0xFFFFFFFFLL
-
-#define ME4600_AI_FIFO_COUNT				2048
-
-#define ME4600_AI_LIST_COUNT				1024
-
-#define ME4600_AI_LIST_INPUT_SINGLE_ENDED	0x000
-#define ME4600_AI_LIST_INPUT_DIFFERENTIAL	0x020
-
-#define ME4600_AI_LIST_RANGE_BIPOLAR_10		0x000
-#define ME4600_AI_LIST_RANGE_BIPOLAR_2_5	0x040
-#define ME4600_AI_LIST_RANGE_UNIPOLAR_10	0x080
-#define ME4600_AI_LIST_RANGE_UNIPOLAR_2_5	0x0C0
-
-#define ME4600_AI_LIST_LAST_ENTRY		0x100
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_ao.c b/drivers/staging/meilhaus/me4600_ao.c
deleted file mode 100644
index 4000dac..0000000
--- a/drivers/staging/meilhaus/me4600_ao.c
+++ /dev/null
@@ -1,5974 +0,0 @@
-/**
- * @file me4600_ao.c
- *
- * @brief ME-4000 analog output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-///Common part. (For normal and Bosch builds.)
-
-/* Includes
- */
-
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-#include <linux/types.h>
-#include <linux/version.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "meids.h"
-#include "me4600_reg.h"
-#include "me4600_ao_reg.h"
-#include "me4600_ao.h"
-
-/* Defines
- */
-
-static int me4600_ao_query_range_by_min_max(me_subdevice_t *subdevice,
-					    int unit,
-					    int *min,
-					    int *max, int *maxdata, int *range);
-
-static int me4600_ao_query_number_ranges(me_subdevice_t *subdevice,
-					 int unit, int *count);
-
-static int me4600_ao_query_range_info(me_subdevice_t *subdevice,
-				      int range,
-				      int *unit,
-				      int *min, int *max, int *maxdata);
-
-static int me4600_ao_query_timer(me_subdevice_t *subdevice,
-				 int timer,
-				 int *base_frequency,
-				 long long *min_ticks, long long *max_ticks);
-
-static int me4600_ao_query_number_channels(me_subdevice_t *subdevice,
-					   int *number);
-
-static int me4600_ao_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype);
-
-static int me4600_ao_query_subdevice_caps(me_subdevice_t *subdevice,
-					  int *caps);
-
-static int me4600_ao_query_subdevice_caps_args(struct me_subdevice *subdevice,
-					       int cap, int *args, int count);
-
-#ifndef BOSCH
-/// @note NORMAL BUILD
-/// @author Krzysztof Gantzke   (k.gantzke@xxxxxxxxxxx)
-/* Includes
- */
-
-# include <linux/workqueue.h>
-
-/* Defines
- */
-
-/** Remove subdevice.
-*/
-static void me4600_ao_destructor(struct me_subdevice *subdevice);
-
-/** Reset subdevice. Stop all actions. Reset registry. Disable FIFO. Set output to 0V and status to 'none'.
-*/
-static int me4600_ao_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags);
-
-/** Set output as single
-*/
-static int me4600_ao_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags);
-
-/** Pass to user actual value of output.
-*/
-static int me4600_ao_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags);
-
-/** Write to output requed value.
-*/
-static int me4600_ao_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags);
-
-/** Set output as streamed device.
-*/
-static int me4600_ao_io_stream_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      meIOStreamConfig_t *config_list,
-				      int count,
-				      meIOStreamTrigger_t *trigger,
-				      int fifo_irq_threshold, int flags);
-
-/** Wait for / Check empty space in buffer.
-*/
-static int me4600_ao_io_stream_new_values(me_subdevice_t *subdevice,
-					  struct file *filep,
-					  int time_out, int *count, int flags);
-
-/** Start streaming.
-*/
-static int me4600_ao_io_stream_start(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int start_mode, int time_out, int flags);
-
-/** Check actual state. / Wait for end.
-*/
-static int me4600_ao_io_stream_status(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int wait,
-				      int *status, int *values, int flags);
-
-/** Stop streaming.
-*/
-static int me4600_ao_io_stream_stop(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int stop_mode, int flags);
-
-/** Write datas to buffor.
-*/
-static int me4600_ao_io_stream_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int write_mode,
-				     int *values, int *count, int flags);
-
-/** Interrupt handler. Copy from buffer to FIFO.
-*/
-static irqreturn_t me4600_ao_isr(int irq, void *dev_id);
-/** Copy data from circular buffer to fifo (fast) in wraparound mode.
-*/
-inline int ao_write_data_wraparound(me4600_ao_subdevice_t *instance, int count,
-				    int start_pos);
-
-/** Copy data from circular buffer to fifo (fast).
-*/
-inline int ao_write_data(me4600_ao_subdevice_t *instance, int count,
-			 int start_pos);
-
-/** Copy data from circular buffer to fifo (slow).
-*/
-inline int ao_write_data_pooling(me4600_ao_subdevice_t *instance, int count,
-				 int start_pos);
-
-/** Copy data from user space to circular buffer.
-*/
-inline int ao_get_data_from_user(me4600_ao_subdevice_t *instance, int count,
-				 int *user_values);
-
-/** Stop presentation. Preserve FIFOs.
-*/
-inline int ao_stop_immediately(me4600_ao_subdevice_t *instance);
-
-/** Task for asynchronical state verifying.
-*/
-static void me4600_ao_work_control_task(struct work_struct *work);
-/* Functions
- */
-
-static int me4600_ao_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t tmp;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	instance->status = ao_status_none;
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-	instance->timeout.delay = 0;
-	instance->timeout.start_time = jiffies;
-
-	//Stop state machine.
-	err = ao_stop_immediately(instance);
-
-	//Remove from synchronous start.
-	spin_lock(instance->preload_reg_lock);
-	tmp = inl(instance->preload_reg);
-	tmp &=
-	    ~((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->
-	      ao_idx);
-	outl(tmp, instance->preload_reg);
-	PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, tmp);
-	*instance->preload_flags &=
-	    ~((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->
-	      ao_idx);
-	spin_unlock(instance->preload_reg_lock);
-
-	//Set single mode, dissable FIFO, dissable external trigger, set output to analog, block interrupt.
-	outl(ME4600_AO_MODE_SINGLE | ME4600_AO_CTRL_BIT_STOP |
-	     ME4600_AO_CTRL_BIT_IMMEDIATE_STOP | ME4600_AO_CTRL_BIT_RESET_IRQ,
-	     instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base,
-		   ME4600_AO_MODE_SINGLE | ME4600_AO_CTRL_BIT_STOP |
-		   ME4600_AO_CTRL_BIT_IMMEDIATE_STOP |
-		   ME4600_AO_CTRL_BIT_RESET_IRQ);
-
-	//Set output to 0V
-	outl(0x8000, instance->single_reg);
-	PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->single_reg - instance->reg_base, 0x8000);
-
-	instance->circ_buf.head = 0;
-	instance->circ_buf.tail = 0;
-	instance->preloaded_count = 0;
-	instance->data_count = 0;
-	instance->single_value = 0x8000;
-	instance->single_value_in_fifo = 0x8000;
-
-	//Set status to signal that device is unconfigured.
-	instance->status = ao_status_none;
-
-	//Signal reset if user is on wait.
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t ctrl;
-	uint32_t sync;
-	unsigned long cpu_flags;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	// Checking parameters
-	if (flags) {
-		PERROR
-		    ("Invalid flag specified. Must be ME_IO_SINGLE_CONFIG_NO_FLAGS.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	switch (trig_type) {
-	case ME_TRIG_TYPE_SW:
-		if (trig_edge != ME_TRIG_EDGE_NONE) {
-			PERROR
-			    ("Invalid trigger edge. Software trigger has not edge.\n");
-			return ME_ERRNO_INVALID_TRIG_EDGE;
-		}
-		break;
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-		switch (trig_edge) {
-		case ME_TRIG_EDGE_ANY:
-		case ME_TRIG_EDGE_RISING:
-		case ME_TRIG_EDGE_FALLING:
-			break;
-
-		default:
-			PERROR("Invalid trigger edge.\n");
-			return ME_ERRNO_INVALID_TRIG_EDGE;
-		}
-		break;
-
-	default:
-		PERROR
-		    ("Invalid trigger type. Trigger must be software or digital.\n");
-		return ME_ERRNO_INVALID_TRIG_TYPE;
-	}
-
-	if ((trig_chan != ME_TRIG_CHAN_DEFAULT)
-	    && (trig_chan != ME_TRIG_CHAN_SYNCHRONOUS)) {
-		PERROR("Invalid trigger channel specified.\n");
-		return ME_ERRNO_INVALID_TRIG_CHAN;
-	}
-
-	if (ref != ME_REF_AO_GROUND) {
-		PERROR
-		    ("Invalid reference. Analog outputs have to have got REF_AO_GROUND.\n");
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	if (single_config != 0) {
-		PERROR
-		    ("Invalid single config specified. Only one range for anlog outputs is available.\n");
-		return ME_ERRNO_INVALID_SINGLE_CONFIG;
-	}
-
-	if (channel != 0) {
-		PERROR
-		    ("Invalid channel number specified. Analog output have only one channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	//Subdevice running in stream mode!
-	if ((instance->status >= ao_status_stream_run_wait)
-	    && (instance->status < ao_status_stream_end)) {
-		PERROR("Subdevice is busy.\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-/// @note For single all calls (config and write) are erasing previous state!
-
-	instance->status = ao_status_none;
-
-	// Correct single mirrors
-	instance->single_value_in_fifo = instance->single_value;
-
-	//Stop device
-	err = ao_stop_immediately(instance);
-	if (err) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-	// Set control register.
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	// Set stop bit. Stop streaming mode.
-	ctrl = inl(instance->ctrl_reg);
-	//Reset all bits.
-	ctrl = ME4600_AO_CTRL_BIT_IMMEDIATE_STOP | ME4600_AO_CTRL_BIT_STOP;
-
-	if (trig_type == ME_TRIG_TYPE_EXT_DIGITAL) {
-		PINFO("External digital trigger.\n");
-
-		if (trig_edge == ME_TRIG_EDGE_ANY) {
-//                              ctrl |= ME4600_AO_CTRL_BIT_EX_TRIG_EDGE | ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-			instance->ctrl_trg =
-			    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE |
-			    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-		} else if (trig_edge == ME_TRIG_EDGE_FALLING) {
-//                              ctrl |= ME4600_AO_CTRL_BIT_EX_TRIG_EDGE;
-			instance->ctrl_trg = ME4600_AO_CTRL_BIT_EX_TRIG_EDGE;
-		} else if (trig_edge == ME_TRIG_EDGE_RISING) {
-			instance->ctrl_trg = 0x0;
-		}
-	} else if (trig_type == ME_TRIG_TYPE_SW) {
-		PDEBUG("Software trigger\n");
-		instance->ctrl_trg = 0x0;
-	}
-
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	// Set preload/synchronization register.
-	spin_lock(instance->preload_reg_lock);
-	if (trig_type == ME_TRIG_TYPE_SW) {
-		*instance->preload_flags &=
-		    ~(ME4600_AO_SYNC_EXT_TRIG << instance->ao_idx);
-	} else			//if (trig_type == ME_TRIG_TYPE_EXT_DIGITAL)
-	{
-		*instance->preload_flags |=
-		    ME4600_AO_SYNC_EXT_TRIG << instance->ao_idx;
-	}
-
-	if (trig_chan == ME_TRIG_CHAN_DEFAULT) {
-		*instance->preload_flags &=
-		    ~(ME4600_AO_SYNC_HOLD << instance->ao_idx);
-	} else			//if (trig_chan == ME_TRIG_CHAN_SYNCHRONOUS)
-	{
-		*instance->preload_flags |=
-		    ME4600_AO_SYNC_HOLD << instance->ao_idx;
-	}
-
-	//Reset hardware register
-	sync = inl(instance->preload_reg);
-	PDEBUG_REG("preload_reg inl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, sync);
-	sync &= ~(ME4600_AO_SYNC_EXT_TRIG << instance->ao_idx);
-	sync |= ME4600_AO_SYNC_HOLD << instance->ao_idx;
-
-	//Output configured in default (safe) mode.
-	outl(sync, instance->preload_reg);
-	PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, sync);
-	spin_unlock(instance->preload_reg_lock);
-
-	instance->status = ao_status_single_configured;
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	unsigned long j;
-	unsigned long delay = 0;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags & ~ME_IO_SINGLE_NONBLOCKING) {
-		PERROR("Invalid flag specified. %d\n", flags);
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (channel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if ((instance->status >= ao_status_stream_configured)
-	    && (instance->status <= ao_status_stream_end)) {
-		PERROR("Subdevice not configured to work in single mode!\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	ME_SUBDEVICE_ENTER;
-	if ((!flags) && (instance->status == ao_status_single_run_wait)) {	//Blocking mode. Wait for trigger.
-		if (time_out) {
-			delay = (time_out * HZ) / 1000;
-			if (delay == 0)
-				delay = 1;
-		}
-
-		j = jiffies;
-
-		//Only runing process will interrupt this call. Events are signaled when status change. This procedure has own timeout.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ao_status_single_run_wait),
-						 (delay) ? delay +
-						 1 : LONG_MAX);
-
-		if (instance->status == ao_status_none) {
-			PDEBUG("Single canceled.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		if ((delay) && ((jiffies - j) >= delay)) {
-
-			PDEBUG("Timeout reached.\n");
-			err = ME_ERRNO_TIMEOUT;
-		}
-
-		*value =
-		    (!err) ? instance->single_value_in_fifo : instance->
-		    single_value;
-	} else {		//Non-blocking mode
-		//Read value
-		*value = instance->single_value;
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags;
-	unsigned long j;
-	unsigned long delay = 0x0;
-
-	//Registry handling variables.
-	uint32_t sync_mask;
-	uint32_t mode;
-	uint32_t tmp;
-	uint32_t ctrl;
-	uint32_t status;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags &
-	    ~(ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS |
-	      ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING)) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (value & ~ME4600_AO_MAX_DATA) {
-		PERROR("Invalid value provided.\n");
-		return ME_ERRNO_VALUE_OUT_OF_RANGE;
-	}
-
-	if (channel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if ((instance->status == ao_status_none)
-	    || (instance->status > ao_status_single_end)) {
-		PERROR("Subdevice not configured to work in single mode!\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-/// @note For single all calls (config and write) are erasing previous state!
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-
-	// Correct single mirrors
-	instance->single_value_in_fifo = instance->single_value;
-
-	//Stop device
-	err = ao_stop_immediately(instance);
-	if (err) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-
-		if (delay == 0)
-			delay = 1;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	instance->single_value_in_fifo = value;
-
-	ctrl = inl(instance->ctrl_reg);
-
-	if (!instance->fifo) {	//No FIFO
-		//Set the single mode.
-		ctrl &= ~ME4600_AO_CTRL_MODE_MASK;
-
-		//Write value
-		PDEBUG("Write value\n");
-		outl(value, instance->single_reg);
-		PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->single_reg - instance->reg_base, value);
-	} else {		// mix-mode
-		//Set speed
-		outl(ME4600_AO_MIN_CHAN_TICKS - 1, instance->timer_reg);
-		PDEBUG_REG("timer_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->timer_reg - instance->reg_base,
-			   (int)ME4600_AO_MIN_CHAN_TICKS);
-		instance->hardware_stop_delay = HZ / 10;	//100ms
-
-		status = inl(instance->status_reg);
-
-		//Set the continous mode.
-		ctrl &= ~ME4600_AO_CTRL_MODE_MASK;
-		ctrl |= ME4600_AO_MODE_CONTINUOUS;
-
-		//Prepare FIFO
-		if (!(ctrl & ME4600_AO_CTRL_BIT_ENABLE_FIFO)) {	//FIFO wasn't enabeled. Do it.
-			PINFO("Enableing FIFO.\n");
-			ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			ctrl |=
-			    ME4600_AO_CTRL_BIT_ENABLE_FIFO |
-			    ME4600_AO_CTRL_BIT_RESET_IRQ;
-		} else {	//Check if FIFO is empty
-			if (status & ME4600_AO_STATUS_BIT_EF) {	//FIFO not empty
-				PINFO("Reseting FIFO.\n");
-				ctrl &=
-				    ~(ME4600_AO_CTRL_BIT_ENABLE_FIFO |
-				      ME4600_AO_CTRL_BIT_ENABLE_IRQ);
-				ctrl |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-				outl(ctrl, instance->ctrl_reg);
-				PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->ctrl_reg -
-					   instance->reg_base, ctrl);
-
-				ctrl |=
-				    ME4600_AO_CTRL_BIT_ENABLE_FIFO |
-				    ME4600_AO_CTRL_BIT_RESET_IRQ;
-			} else {	//FIFO empty, only interrupt needs to be disabled!
-				ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-				ctrl |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-			}
-		}
-
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-
-		//Write output - 1 value to FIFO
-		if (instance->ao_idx & 0x1) {
-			outl(value <<= 16, instance->fifo_reg);
-			PDEBUG_REG("fifo_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->fifo_reg - instance->reg_base,
-				   value <<= 16);
-		} else {
-			outl(value, instance->fifo_reg);
-			PDEBUG_REG("fifo_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->fifo_reg - instance->reg_base,
-				   value);
-		}
-	}
-
-	mode = *instance->preload_flags >> instance->ao_idx;
-	mode &= (ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG);
-
-	PINFO("Triggering mode: 0x%x\n", mode);
-
-	spin_lock(instance->preload_reg_lock);
-	sync_mask = inl(instance->preload_reg);
-	PDEBUG_REG("preload_reg inl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, sync_mask);
-	switch (mode) {
-	case 0:		//Individual software
-		ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-
-		if (!instance->fifo) {	// No FIFO - In this case resetting 'ME4600_AO_SYNC_HOLD' will trigger output.
-			if ((sync_mask & ((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != ME4600_AO_SYNC_HOLD) {	//Now we can set correct mode. This is exception. It is set to synchronous and triggered later.
-				sync_mask &=
-				    ~(ME4600_AO_SYNC_EXT_TRIG << instance->
-				      ao_idx);
-				sync_mask |=
-				    ME4600_AO_SYNC_HOLD << instance->ao_idx;
-
-				outl(sync_mask, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     sync_mask);
-			}
-		} else {	// FIFO
-			if ((sync_mask & ((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != 0x0) {	//Now we can set correct mode.
-				sync_mask &=
-				    ~((ME4600_AO_SYNC_EXT_TRIG |
-				       ME4600_AO_SYNC_HOLD) << instance->
-				      ao_idx);
-
-				outl(sync_mask, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     sync_mask);
-			}
-		}
-		instance->single_value = value;
-		break;
-
-	case ME4600_AO_SYNC_EXT_TRIG:	//Individual hardware
-		ctrl |= ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-
-		if (!instance->fifo) {	// No FIFO - In this case resetting 'ME4600_AO_SYNC_HOLD' will trigger output.
-			if ((sync_mask & ((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != ME4600_AO_SYNC_HOLD) {	//Now we can set correct mode
-				sync_mask &=
-				    ~(ME4600_AO_SYNC_EXT_TRIG << instance->
-				      ao_idx);
-				sync_mask |=
-				    ME4600_AO_SYNC_HOLD << instance->ao_idx;
-
-				outl(sync_mask, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     sync_mask);
-			}
-		} else {	// FIFO
-			if ((sync_mask & ((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != 0x0) {	//Now we can set correct mode.
-				sync_mask &=
-				    ~((ME4600_AO_SYNC_EXT_TRIG |
-				       ME4600_AO_SYNC_HOLD) << instance->
-				      ao_idx);
-
-				outl(sync_mask, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     sync_mask);
-			}
-		}
-		break;
-
-	case ME4600_AO_SYNC_HOLD:	//Synchronous software
-		ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-
-//                                      if((sync_mask & ((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != ME4600_AO_SYNC_HOLD)
-		if ((sync_mask & ((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != (ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG)) {	//Now we can set correct mode
-			sync_mask |=
-			    ME4600_AO_SYNC_EXT_TRIG << instance->ao_idx;
-//                                              sync_mask &= ~(ME4600_AO_SYNC_EXT_TRIG << instance->ao_idx);
-			sync_mask |= ME4600_AO_SYNC_HOLD << instance->ao_idx;
-
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-		}
-		break;
-
-	case (ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG):	//Synchronous hardware
-		ctrl |= ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-		if ((sync_mask & ((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != (ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG)) {	//Now we can set correct mode
-			sync_mask |=
-			    (ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) <<
-			    instance->ao_idx;
-
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-		}
-		break;
-	}
-//              spin_unlock(instance->preload_reg_lock);        // Moved down.
-
-	//Activate ISM (remove 'stop' bits)
-	ctrl &=
-	    ~(ME4600_AO_CTRL_BIT_EX_TRIG_EDGE |
-	      ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH);
-	ctrl |= instance->ctrl_trg;
-	ctrl &= ~(ME4600_AO_CTRL_BIT_STOP | ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-/// @note When flag 'ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS' is set than output is triggered. ALWAYS!
-
-	if (!instance->fifo) {	//No FIFO
-		if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {	//Fired all software synchronous outputs.
-			tmp = ~(*instance->preload_flags | 0xFFFF0000);
-			PINFO
-			    ("Fired all software synchronous outputs. mask:0x%08x\n",
-			     tmp);
-			tmp |= sync_mask & 0xFFFF0000;
-			// Add this channel to list
-			tmp &= ~(ME4600_AO_SYNC_HOLD << instance->ao_idx);
-
-			//Fire
-			PINFO("Software trigger.\n");
-			outl(tmp, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   tmp);
-
-			//Restore save settings
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-		} else if (!mode) {	// Add this channel to list
-			outl(sync_mask &
-			     ~(ME4600_AO_SYNC_HOLD << instance->ao_idx),
-			     instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask & ~(ME4600_AO_SYNC_HOLD <<
-						 instance->ao_idx));
-
-			//Fire
-			PINFO("Software trigger.\n");
-
-			//Restore save settings
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-		}
-
-	} else {		// mix-mode - begin
-		if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {	//Trigger outputs
-			//Add channel to start list
-			outl(sync_mask |
-			     (ME4600_AO_SYNC_HOLD << instance->ao_idx),
-			     instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask | (ME4600_AO_SYNC_HOLD <<
-						instance->ao_idx));
-
-			//Fire
-			PINFO
-			    ("Fired all software synchronous outputs by software trigger.\n");
-			outl(0x8000, instance->single_reg);
-			PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->single_reg - instance->reg_base,
-				   0x8000);
-
-			//Restore save settings
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-		} else if (!mode) {	//Trigger outputs
-/*			//Remove channel from start list //<== Unnecessary. Removed.
-			outl(sync_mask & ~(ME4600_AO_SYNC_HOLD << instance->ao_idx), instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base, instance->preload_reg - instance->reg_base, tmp);
-*/
-			//Fire
-			PINFO("Software trigger.\n");
-			outl(0x8000, instance->single_reg);
-			PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->single_reg - instance->reg_base,
-				   0x8000);
-
-/*			//Restore save settings //<== Unnecessary. Removed.
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base, instance->preload_reg - instance->reg_base, sync_mask);
-*/
-		}
-	}
-	spin_unlock(instance->preload_reg_lock);
-
-	j = jiffies;
-	instance->status = ao_status_single_run_wait;
-
-	instance->timeout.delay = delay;
-	instance->timeout.start_time = j;
-	instance->ao_control_task_flag = 1;
-	queue_delayed_work(instance->me4600_workqueue,
-			   &instance->ao_control_task, 1);
-
-	if (!(flags & ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING)) {
-
-		//Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ao_status_single_run_wait),
-						 (delay) ? delay +
-						 1 : LONG_MAX);
-
-		if (((!delay) || ((jiffies - j) <= delay))
-		    && (instance->status != ao_status_single_end)) {
-			PDEBUG("Single canceled.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			instance->ao_control_task_flag = 0;
-			cancel_delayed_work(&instance->ao_control_task);
-			ao_stop_immediately(instance);
-			instance->status = ao_status_none;
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		if ((delay) && ((jiffies - j) >= delay)) {
-			if (instance->status == ao_status_single_end) {
-				PDEBUG("Timeout reached.\n");
-			} else {
-				if ((jiffies - j) > delay) {
-					PERROR
-					    ("Timeout reached. Not handled by control task!\n");
-				} else {
-					PERROR
-					    ("Timeout reached. Signal come but status is strange: %d\n",
-					     instance->status);
-				}
-
-				ao_stop_immediately(instance);
-			}
-
-			instance->ao_control_task_flag = 0;
-			cancel_delayed_work(&instance->ao_control_task);
-			instance->status = ao_status_single_end;
-			err = ME_ERRNO_TIMEOUT;
-		}
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      meIOStreamConfig_t *config_list,
-				      int count,
-				      meIOStreamTrigger_t *trigger,
-				      int fifo_irq_threshold, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t ctrl;
-	unsigned long cpu_flags;
-	uint64_t conv_ticks;
-	unsigned int conv_start_ticks_low = trigger->iConvStartTicksLow;
-	unsigned int conv_start_ticks_high = trigger->iConvStartTicksHigh;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	conv_ticks =
-	    (uint64_t) conv_start_ticks_low +
-	    ((uint64_t) conv_start_ticks_high << 32);
-
-	if (flags &
-	    ~(ME_IO_STREAM_CONFIG_HARDWARE_ONLY | ME_IO_STREAM_CONFIG_WRAPAROUND
-	      | ME_IO_STREAM_CONFIG_BIT_PATTERN)) {
-		PERROR("Invalid flags.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (flags & ME_IO_STREAM_CONFIG_HARDWARE_ONLY) {
-		if (!(flags & ME_IO_STREAM_CONFIG_WRAPAROUND)) {
-			PERROR
-			    ("Hardware ME_IO_STREAM_CONFIG_HARDWARE_ONLY has to be with ME_IO_STREAM_CONFIG_WRAPAROUND.\n");
-			return ME_ERRNO_INVALID_FLAGS;
-		}
-
-		if ((trigger->iAcqStopTrigType != ME_TRIG_TYPE_NONE)
-		    || (trigger->iScanStopTrigType != ME_TRIG_TYPE_NONE)) {
-			PERROR
-			    ("Hardware wraparound mode must be in infinite mode.\n");
-			return ME_ERRNO_INVALID_FLAGS;
-		}
-	}
-
-	if (count != 1) {
-		PERROR("Only 1 entry in config list acceptable.\n");
-		return ME_ERRNO_INVALID_CONFIG_LIST_COUNT;
-	}
-
-	if (config_list[0].iChannel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (config_list[0].iStreamConfig != 0) {
-		PERROR("Only one range available.\n");
-		return ME_ERRNO_INVALID_STREAM_CONFIG;
-	}
-
-	if (config_list[0].iRef != ME_REF_AO_GROUND) {
-		PERROR("Output is referenced to ground.\n");
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	if ((trigger->iAcqStartTicksLow != 0)
-	    || (trigger->iAcqStartTicksHigh != 0)) {
-		PERROR
-		    ("Invalid acquisition start trigger argument specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_ARG;
-	}
-
-	if (config_list[0].iFlags) {
-		PERROR("Invalid config list flag.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	switch (trigger->iAcqStartTrigType) {
-	case ME_TRIG_TYPE_SW:
-		if (trigger->iAcqStartTrigEdge != ME_TRIG_EDGE_NONE) {
-			PERROR
-			    ("Invalid acquisition start trigger edge specified.\n");
-			return ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE;
-		}
-		break;
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-		switch (trigger->iAcqStartTrigEdge) {
-		case ME_TRIG_EDGE_ANY:
-		case ME_TRIG_EDGE_RISING:
-		case ME_TRIG_EDGE_FALLING:
-			break;
-
-		default:
-			PERROR
-			    ("Invalid acquisition start trigger edge specified.\n");
-			return ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE;
-		}
-		break;
-
-	default:
-		PERROR("Invalid acquisition start trigger type specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_TRIG_TYPE;
-	}
-
-	if (trigger->iScanStartTrigType != ME_TRIG_TYPE_FOLLOW) {
-		PERROR("Invalid scan start trigger type specified.\n");
-		return ME_ERRNO_INVALID_SCAN_START_TRIG_TYPE;
-	}
-
-	if (trigger->iConvStartTrigType != ME_TRIG_TYPE_TIMER) {
-		PERROR("Invalid conv start trigger type specified.\n");
-		return ME_ERRNO_INVALID_CONV_START_TRIG_TYPE;
-	}
-
-	if ((conv_ticks < ME4600_AO_MIN_CHAN_TICKS)
-	    || (conv_ticks > ME4600_AO_MAX_CHAN_TICKS)) {
-		PERROR("Invalid conv start trigger argument specified.\n");
-		return ME_ERRNO_INVALID_CONV_START_ARG;
-	}
-
-	if (trigger->iAcqStartTicksLow || trigger->iAcqStartTicksHigh) {
-		PERROR("Invalid acq start trigger argument specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_ARG;
-	}
-
-	if (trigger->iScanStartTicksLow || trigger->iScanStartTicksHigh) {
-		PERROR("Invalid scan start trigger argument specified.\n");
-		return ME_ERRNO_INVALID_SCAN_START_ARG;
-	}
-
-	switch (trigger->iScanStopTrigType) {
-	case ME_TRIG_TYPE_NONE:
-		if (trigger->iScanStopCount != 0) {
-			PERROR("Invalid scan stop count specified.\n");
-			return ME_ERRNO_INVALID_SCAN_STOP_ARG;
-		}
-		break;
-
-	case ME_TRIG_TYPE_COUNT:
-		if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {
-			if (trigger->iScanStopCount <= 0) {
-				PERROR("Invalid scan stop count specified.\n");
-				return ME_ERRNO_INVALID_SCAN_STOP_ARG;
-			}
-		} else {
-			PERROR("The continous mode has not 'scan' contects.\n");
-			return ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-		}
-		break;
-
-	default:
-		PERROR("Invalid scan stop trigger type specified.\n");
-		return ME_ERRNO_INVALID_SCAN_STOP_TRIG_TYPE;
-	}
-
-	switch (trigger->iAcqStopTrigType) {
-	case ME_TRIG_TYPE_NONE:
-		if (trigger->iAcqStopCount != 0) {
-			PERROR("Invalid acq stop count specified.\n");
-			return ME_ERRNO_INVALID_ACQ_STOP_ARG;
-		}
-		break;
-
-	case ME_TRIG_TYPE_COUNT:
-		if (trigger->iScanStopTrigType != ME_TRIG_TYPE_NONE) {
-			PERROR("Invalid acq stop trigger type specified.\n");
-			return ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-		}
-
-		if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {
-			if (trigger->iAcqStopCount <= 0) {
-				PERROR
-				    ("The continous mode has not 'scan' contects.\n");
-				return ME_ERRNO_INVALID_ACQ_STOP_ARG;
-			}
-		}
-		break;
-
-	default:
-		PERROR("Invalid acq stop trigger type specified.\n");
-		return ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-	}
-
-	switch (trigger->iAcqStartTrigChan) {
-	case ME_TRIG_CHAN_DEFAULT:
-	case ME_TRIG_CHAN_SYNCHRONOUS:
-		break;
-
-	default:
-		PERROR("Invalid acq start trigger channel specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_TRIG_CHAN;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if ((flags & ME_IO_STREAM_CONFIG_BIT_PATTERN) && !instance->bitpattern) {
-		PERROR("This subdevice not support output redirection.\n");
-		ME_SUBDEVICE_EXIT;
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-	//Stop device
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-
-	//Check if state machine is stopped.
-	err = ao_stop_immediately(instance);
-	if (err) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	//Reset control register. Block all actions. Disable IRQ. Disable FIFO.
-	ctrl =
-	    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP | ME4600_AO_CTRL_BIT_STOP |
-	    ME4600_AO_CTRL_BIT_RESET_IRQ;
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-
-	//This is paranoic, but to be sure.
-	instance->preloaded_count = 0;
-	instance->data_count = 0;
-	instance->circ_buf.head = 0;
-	instance->circ_buf.tail = 0;
-
-	/* Set mode. */
-	if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {	//Wraparound
-		if (flags & ME_IO_STREAM_CONFIG_HARDWARE_ONLY) {	//Hardware wraparound
-			PINFO("Hardware wraparound.\n");
-			ctrl |= ME4600_AO_MODE_WRAPAROUND;
-			instance->mode = ME4600_AO_HW_WRAP_MODE;
-		} else {	//Software wraparound
-			PINFO("Software wraparound.\n");
-			ctrl |= ME4600_AO_MODE_CONTINUOUS;
-			instance->mode = ME4600_AO_SW_WRAP_MODE;
-		}
-	} else {		//Continous
-		PINFO("Continous.\n");
-		ctrl |= ME4600_AO_MODE_CONTINUOUS;
-		instance->mode = ME4600_AO_CONTINOUS;
-	}
-
-	//Set the trigger edge.
-	if (trigger->iAcqStartTrigType == ME_TRIG_TYPE_EXT_DIGITAL) {	//Set the trigger type and edge for external trigger.
-		PINFO("External digital trigger.\n");
-		instance->start_mode = ME4600_AO_EXT_TRIG;
-/*
-			ctrl |= ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-*/
-		switch (trigger->iAcqStartTrigEdge) {
-		case ME_TRIG_EDGE_RISING:
-			PINFO("Set the trigger edge: rising.\n");
-			instance->ctrl_trg = 0x0;
-			break;
-
-		case ME_TRIG_EDGE_FALLING:
-			PINFO("Set the trigger edge: falling.\n");
-//                                      ctrl |= ME4600_AO_CTRL_BIT_EX_TRIG_EDGE;
-			instance->ctrl_trg = ME4600_AO_CTRL_BIT_EX_TRIG_EDGE;
-			break;
-
-		case ME_TRIG_EDGE_ANY:
-			PINFO("Set the trigger edge: both edges.\n");
-//                                      ctrl |= ME4600_AO_CTRL_BIT_EX_TRIG_EDGE | ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-			instance->ctrl_trg =
-			    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE |
-			    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-			break;
-		}
-	} else {
-		PINFO("Internal software trigger.\n");
-		instance->start_mode = 0;
-	}
-
-	//Set the stop mode and value.
-	if (trigger->iAcqStopTrigType == ME_TRIG_TYPE_COUNT) {	//Amount of data
-		instance->stop_mode = ME4600_AO_ACQ_STOP_MODE;
-		instance->stop_count = trigger->iAcqStopCount;
-	} else if (trigger->iScanStopTrigType == ME_TRIG_TYPE_COUNT) {	//Amount of 'scans'
-		instance->stop_mode = ME4600_AO_SCAN_STOP_MODE;
-		instance->stop_count = trigger->iScanStopCount;
-	} else {		//Infinite
-		instance->stop_mode = ME4600_AO_INF_STOP_MODE;
-		instance->stop_count = 0;
-	}
-
-	PINFO("Stop count: %d.\n", instance->stop_count);
-
-	if (trigger->iAcqStartTrigChan == ME_TRIG_CHAN_SYNCHRONOUS) {	//Synchronous start
-		instance->start_mode |= ME4600_AO_SYNC_HOLD;
-		if (trigger->iAcqStartTrigType == ME_TRIG_TYPE_EXT_DIGITAL) {	//Externaly triggered
-			PINFO("Synchronous start. Externaly trigger active.\n");
-			instance->start_mode |= ME4600_AO_SYNC_EXT_TRIG;
-		}
-#ifdef MEDEBUG_INFO
-		else {
-			PINFO
-			    ("Synchronous start. Externaly trigger dissabled.\n");
-		}
-#endif
-
-	}
-	//Set speed
-	outl(conv_ticks - 2, instance->timer_reg);
-	PDEBUG_REG("timer_reg outl(0x%lX+0x%lX)=0x%llx\n", instance->reg_base,
-		   instance->timer_reg - instance->reg_base, conv_ticks - 2);
-	instance->hardware_stop_delay = (int)(conv_ticks * HZ) / ME4600_AO_BASE_FREQUENCY;	//<== MUST be with cast!
-
-	//Conect outputs to analog or digital port.
-	if (flags & ME_IO_STREAM_CONFIG_BIT_PATTERN) {
-		ctrl |= ME4600_AO_CTRL_BIT_ENABLE_DO;
-	}
-	// Write the control word
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-
-	//Set status.
-	instance->status = ao_status_stream_configured;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_new_values(me_subdevice_t *subdevice,
-					  struct file *filep,
-					  int time_out, int *count, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	long t = 0;
-	long j;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!instance->circ_buf.buf) {
-		PERROR("Circular buffer not exists.\n");
-		return ME_ERRNO_INTERNAL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (me_circ_buf_space(&instance->circ_buf)) {	//The buffer is NOT full.
-		*count = me_circ_buf_space(&instance->circ_buf);
-	} else {		//The buffer is full.
-		if (time_out) {
-			t = (time_out * HZ) / 1000;
-
-			if (t == 0)
-				t = 1;
-		} else {	//Max time.
-			t = LONG_MAX;
-		}
-
-		*count = 0;
-
-		j = jiffies;
-
-		//Only runing process will interrupt this call. Interrupts are when FIFO HF is signaled.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 ((me_circ_buf_space
-						   (&instance->circ_buf))
-						  || !(inl(instance->status_reg)
-						       &
-						       ME4600_AO_STATUS_BIT_FSM)),
-						 t);
-
-		if (!(inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM)) {
-			PERROR("AO subdevice is not running.\n");
-			err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-		} else if (signal_pending(current)) {
-			PERROR("Wait on values interrupted from signal.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		} else if ((jiffies - j) >= t) {
-			PERROR("Wait on values timed out.\n");
-			err = ME_ERRNO_TIMEOUT;
-		} else {	//Uff... all is good. Inform user about empty space.
-			*count = me_circ_buf_space(&instance->circ_buf);
-		}
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_start(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int start_mode, int time_out, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags = 0;
-	uint32_t status;
-	uint32_t ctrl;
-	uint32_t synch;
-	int count = 0;
-	int circ_buffer_count;
-
-	unsigned long ref;
-	unsigned long delay = 0;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (flags & ~ME_IO_STREAM_START_TYPE_TRIG_SYNCHRONOUS) {
-		PERROR("Invalid flags.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if ((start_mode != ME_START_MODE_BLOCKING)
-	    && (start_mode != ME_START_MODE_NONBLOCKING)) {
-		PERROR("Invalid start mode specified.\n");
-		return ME_ERRNO_INVALID_START_MODE;
-	}
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-		if (delay == 0)
-			delay = 1;
-	}
-
-	switch (instance->status) {	//Checking actual mode.
-	case ao_status_stream_configured:
-	case ao_status_stream_end:
-		//Correct modes!
-		break;
-
-		//The device is in wrong mode.
-	case ao_status_none:
-	case ao_status_single_configured:
-	case ao_status_single_run_wait:
-	case ao_status_single_run:
-	case ao_status_single_end_wait:
-		PERROR
-		    ("Subdevice must be preinitialize correctly for streaming.\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-
-	case ao_status_stream_fifo_error:
-	case ao_status_stream_buffer_error:
-	case ao_status_stream_error:
-		PDEBUG("Before restart broke stream 'STOP' must be caled.\n");
-		return ME_STATUS_ERROR;
-
-	case ao_status_stream_run_wait:
-	case ao_status_stream_run:
-	case ao_status_stream_end_wait:
-		PDEBUG("Stream is already working.\n");
-		return ME_ERRNO_SUBDEVICE_BUSY;
-
-	default:
-		instance->status = ao_status_stream_error;
-		PERROR_CRITICAL("Status is in wrong state!\n");
-		return ME_ERRNO_INTERNAL;
-
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (instance->mode == ME4600_AO_CONTINOUS) {	//Continous
-		instance->circ_buf.tail += instance->preloaded_count;
-		instance->circ_buf.tail &= instance->circ_buf.mask;
-	}
-	circ_buffer_count = me_circ_buf_values(&instance->circ_buf);
-
-	if (!circ_buffer_count && !instance->preloaded_count) {	//No values in buffer
-		ME_SUBDEVICE_EXIT;
-		PERROR("No values in buffer!\n");
-		return ME_ERRNO_LACK_OF_RESOURCES;
-	}
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-
-	//Stop device
-	err = ao_stop_immediately(instance);
-	if (err) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-	//Set values for single_read()
-	instance->single_value = ME4600_AO_MAX_DATA + 1;
-	instance->single_value_in_fifo = ME4600_AO_MAX_DATA + 1;
-
-	//Setting stop points
-	if (instance->stop_mode == ME4600_AO_SCAN_STOP_MODE) {
-		instance->stop_data_count =
-		    instance->stop_count * circ_buffer_count;
-	} else {
-		instance->stop_data_count = instance->stop_count;
-	}
-
-	if ((instance->stop_data_count != 0)
-	    && (instance->stop_data_count < circ_buffer_count)) {
-		PERROR("More data in buffer than previously set limit!\n");
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	ctrl = inl(instance->ctrl_reg);
-	//Check FIFO
-	if (!(ctrl & ME4600_AO_CTRL_BIT_ENABLE_FIFO)) {	//FIFO wasn't enabeled. Do it. <= This should be done by user call with ME_WRITE_MODE_PRELOAD
-		PINFO("Enableing FIFO.\n");
-		ctrl |=
-		    ME4600_AO_CTRL_BIT_ENABLE_FIFO |
-		    ME4600_AO_CTRL_BIT_RESET_IRQ;
-
-		instance->preloaded_count = 0;
-		instance->data_count = 0;
-	} else {		//Block IRQ
-		ctrl |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-	}
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base,
-		   ctrl | ME4600_AO_CTRL_BIT_RESET_IRQ);
-
-	//Fill FIFO <= Generaly this should be done by user pre-load call but this is second place to do it.
-	status = inl(instance->status_reg);
-	if (!(status & ME4600_AO_STATUS_BIT_EF)) {	//FIFO empty
-		if (instance->stop_data_count == 0) {
-			count = ME4600_AO_FIFO_COUNT;
-		} else {
-			count =
-			    (ME4600_AO_FIFO_COUNT <
-			     instance->
-			     stop_data_count) ? ME4600_AO_FIFO_COUNT :
-			    instance->stop_data_count;
-		}
-
-		//Copy data
-		count =
-		    ao_write_data(instance, count, instance->preloaded_count);
-
-		if (count < 0) {	//This should never happend!
-			PERROR_CRITICAL("COPY FINISH WITH ERROR!\n");
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INTERNAL;
-		}
-	}
-	//Set pre-load features.
-	spin_lock(instance->preload_reg_lock);
-	synch = inl(instance->preload_reg);
-	synch &=
-	    ~((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) << instance->
-	      ao_idx);
-	synch |=
-	    (instance->start_mode & ~ME4600_AO_EXT_TRIG) << instance->ao_idx;
-	outl(synch, instance->preload_reg);
-	PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, synch);
-	spin_unlock(instance->preload_reg_lock);
-
-	//Default count is '0'
-	if (instance->mode == ME4600_AO_CONTINOUS) {	//Continous
-		instance->preloaded_count = 0;
-		instance->circ_buf.tail += count;
-		instance->circ_buf.tail &= instance->circ_buf.mask;
-	} else {		//Wraparound
-		instance->preloaded_count += count;
-		instance->data_count += count;
-
-		//Special case: Infinite wraparound with less than FIFO datas always should runs in hardware mode.
-		if ((instance->stop_mode == ME4600_AO_INF_STOP_MODE)
-		    && (circ_buffer_count <= ME4600_AO_FIFO_COUNT)) {	//Change to hardware wraparound
-			PDEBUG
-			    ("Changeing mode from software wraparound to hardware wraparound.\n");
-			//Copy all data
-			count =
-			    ao_write_data(instance, circ_buffer_count,
-					  instance->preloaded_count);
-			ctrl &= ~ME4600_AO_CTRL_MODE_MASK;
-			ctrl |= ME4600_AO_MODE_WRAPAROUND;
-		}
-
-		if (instance->preloaded_count == me_circ_buf_values(&instance->circ_buf)) {	//Reset position indicator.
-			instance->preloaded_count = 0;
-		} else if (instance->preloaded_count > me_circ_buf_values(&instance->circ_buf)) {	//This should never happend!
-			PERROR_CRITICAL
-			    ("PRELOADED MORE VALUES THAN ARE IN BUFFER!\n");
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INTERNAL;
-		}
-	}
-
-	//Set status to 'wait for start'
-	instance->status = ao_status_stream_run_wait;
-
-	status = inl(instance->status_reg);
-	//Start state machine and interrupts
-	ctrl &= ~(ME4600_AO_CTRL_BIT_STOP | ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-	if (instance->start_mode == ME4600_AO_EXT_TRIG) {	// External trigger.
-		PINFO("External trigger.\n");
-		ctrl |= ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-	}
-	if (!(status & ME4600_AO_STATUS_BIT_HF)) {	//More than half!
-		if ((ctrl & ME4600_AO_CTRL_MODE_MASK) == ME4600_AO_MODE_CONTINUOUS) {	//Enable IRQ only when hardware_continous is set and FIFO is more than half
-			ctrl &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-			ctrl |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-		}
-	}
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	//Trigger output
-	if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {	//Trigger outputs
-		spin_lock(instance->preload_reg_lock);
-		synch = inl(instance->preload_reg);
-		//Add channel to start list
-		outl(synch | (ME4600_AO_SYNC_HOLD << instance->ao_idx),
-		     instance->preload_reg);
-		PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->preload_reg - instance->reg_base,
-			   synch | (ME4600_AO_SYNC_HOLD << instance->ao_idx));
-
-		//Fire
-		PINFO
-		    ("Fired all software synchronous outputs by software trigger.\n");
-		outl(0x8000, instance->single_reg);
-		PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->single_reg - instance->reg_base, 0x8000);
-
-		//Restore save settings
-		outl(synch, instance->preload_reg);
-		PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->preload_reg - instance->reg_base, synch);
-		spin_unlock(instance->preload_reg_lock);
-	} else if (!instance->start_mode) {	//Trigger outputs
-/*
-		//Remove channel from start list.	// <== Unnecessary. Removed.
-		spin_lock(instance->preload_reg_lock);
-			synch = inl(instance->preload_reg);
-			outl(synch & ~(ME4600_AO_SYNC_HOLD << instance->ao_idx), instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base, instance->preload_reg - instance->reg_base, synch & ~(ME4600_AO_SYNC_HOLD << instance->ao_idx));
-*/
-		//Fire
-		PINFO("Software trigger.\n");
-		outl(0x8000, instance->single_reg);
-		PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->single_reg - instance->reg_base, 0x8000);
-
-/*
-			//Restore save settings.	// <== Unnecessary. Removed.
-			outl(synch, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base, instance->preload_reg - instance->reg_base, synch);
-		spin_unlock(instance->preload_reg_lock);
-*/
-	}
-	// Set control task's timeout
-	ref = jiffies;
-	instance->timeout.delay = delay;
-	instance->timeout.start_time = ref;
-
-	if (status & ME4600_AO_STATUS_BIT_HF) {	//Less than half but not empty!
-		PINFO("Less than half.\n");
-		if (instance->stop_data_count != 0) {
-			count = ME4600_AO_FIFO_COUNT / 2;
-		} else {
-			count =
-			    ((ME4600_AO_FIFO_COUNT / 2) <
-			     instance->stop_data_count) ? ME4600_AO_FIFO_COUNT /
-			    2 : instance->stop_data_count;
-		}
-
-		//Copy data
-		count =
-		    ao_write_data(instance, count, instance->preloaded_count);
-
-		if (count < 0) {	//This should never happend!
-			PERROR_CRITICAL("COPY FINISH WITH ERROR!\n");
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INTERNAL;
-		}
-
-		if (instance->mode == ME4600_AO_CONTINOUS) {	//Continous
-			instance->circ_buf.tail += count;
-			instance->circ_buf.tail &= instance->circ_buf.mask;
-		} else {	//Wraparound
-			instance->data_count += count;
-			instance->preloaded_count += count;
-
-			if (instance->preloaded_count == me_circ_buf_values(&instance->circ_buf)) {	//Reset position indicator.
-				instance->preloaded_count = 0;
-			} else if (instance->preloaded_count > me_circ_buf_values(&instance->circ_buf)) {	//This should never happend!
-				PERROR_CRITICAL
-				    ("PRELOADED MORE VALUES THAN ARE IN BUFFER!\n");
-				ME_SUBDEVICE_EXIT;
-				return ME_ERRNO_INTERNAL;
-			}
-		}
-
-		status = inl(instance->status_reg);
-		if (!(status & ME4600_AO_STATUS_BIT_HF)) {	//More than half!
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			ctrl = inl(instance->ctrl_reg);
-			ctrl &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-			ctrl |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-		}
-	}
-	//Special case: Limited wraparound with less than HALF FIFO datas need work around to generate first interrupt.
-	if ((instance->stop_mode != ME4600_AO_INF_STOP_MODE)
-	    && (instance->mode == ME4600_AO_SW_WRAP_MODE)
-	    && (circ_buffer_count <= (ME4600_AO_FIFO_COUNT / 2))) {	//Put more data to FIFO
-		PINFO("Limited wraparound with less than HALF FIFO datas.\n");
-		if (instance->preloaded_count) {	//This should never happend!
-			PERROR_CRITICAL
-			    ("ERROR WHEN LOADING VALUES FOR WRAPAROUND!\n");
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INTERNAL;
-		}
-
-		while (instance->stop_data_count > instance->data_count) {	//Maximum data not set jet.
-			//Copy to buffer
-			if (circ_buffer_count != ao_write_data(instance, circ_buffer_count, 0)) {	//This should never happend!
-				PERROR_CRITICAL
-				    ("ERROR WHEN LOADING VALUES FOR WRAPAROUND!\n");
-				ME_SUBDEVICE_EXIT;
-				return ME_ERRNO_INTERNAL;
-			}
-			instance->data_count += circ_buffer_count;
-
-			if (!((status = inl(instance->status_reg)) & ME4600_AO_STATUS_BIT_HF)) {	//FIFO is more than half. Enable IRQ and end copy.
-				spin_lock_irqsave(&instance->subdevice_lock,
-						  cpu_flags);
-				ctrl = inl(instance->ctrl_reg);
-				ctrl &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-				ctrl |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-				outl(ctrl, instance->ctrl_reg);
-				PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->ctrl_reg -
-					   instance->reg_base, ctrl);
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				break;
-			}
-		}
-	}
-	// Schedule control task.
-	instance->ao_control_task_flag = 1;
-	queue_delayed_work(instance->me4600_workqueue,
-			   &instance->ao_control_task, 1);
-
-	if (start_mode == ME_START_MODE_BLOCKING) {	//Wait for start.
-		//Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ao_status_stream_run_wait),
-						 (delay) ? delay +
-						 1 : LONG_MAX);
-
-		if ((instance->status != ao_status_stream_run)
-		    && (instance->status != ao_status_stream_end)) {
-			PDEBUG("Starting stream canceled. %d\n",
-			       instance->status);
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		} else if ((delay) && ((jiffies - ref) >= delay)) {
-			if (instance->status != ao_status_stream_run) {
-				if (instance->status == ao_status_stream_end) {
-					PDEBUG("Timeout reached.\n");
-				} else {
-					if ((jiffies - ref) > delay) {
-						PERROR
-						    ("Timeout reached. Not handled by control task!\n");
-					} else {
-						PERROR
-						    ("Timeout reached. Signal come but status is strange: %d\n",
-						     instance->status);
-					}
-					ao_stop_immediately(instance);
-				}
-
-				instance->ao_control_task_flag = 0;
-				cancel_delayed_work(&instance->ao_control_task);
-				instance->status = ao_status_stream_end;
-				err = ME_ERRNO_TIMEOUT;
-			}
-		}
-	}
-
-	ME_SUBDEVICE_EXIT;
-	return err;
-}
-
-static int me4600_ao_io_stream_status(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int wait,
-				      int *status, int *values, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((wait != ME_WAIT_NONE) && (wait != ME_WAIT_IDLE)) {
-		PERROR("Invalid wait argument specified.\n");
-		*status = ME_STATUS_INVALID;
-		return ME_ERRNO_INVALID_WAIT;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	switch (instance->status) {
-	case ao_status_single_configured:
-	case ao_status_single_end:
-	case ao_status_stream_configured:
-	case ao_status_stream_end:
-	case ao_status_stream_fifo_error:
-	case ao_status_stream_buffer_error:
-	case ao_status_stream_error:
-		*status = ME_STATUS_IDLE;
-		break;
-
-	case ao_status_single_run_wait:
-	case ao_status_single_run:
-	case ao_status_single_end_wait:
-	case ao_status_stream_run_wait:
-	case ao_status_stream_run:
-	case ao_status_stream_end_wait:
-		*status = ME_STATUS_BUSY;
-		break;
-
-	case ao_status_none:
-	default:
-		*status =
-		    (inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM) ?
-		    ME_STATUS_BUSY : ME_STATUS_IDLE;
-		break;
-	}
-
-	if ((wait == ME_WAIT_IDLE) && (*status == ME_STATUS_BUSY)) {
-		//Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 ((instance->status !=
-						   ao_status_single_run_wait)
-						  && (instance->status !=
-						      ao_status_single_run)
-						  && (instance->status !=
-						      ao_status_single_end_wait)
-						  && (instance->status !=
-						      ao_status_stream_run_wait)
-						  && (instance->status !=
-						      ao_status_stream_run)
-						  && (instance->status !=
-						      ao_status_stream_end_wait)),
-						 LONG_MAX);
-
-		if (instance->status != ao_status_stream_end) {
-			PDEBUG("Wait for IDLE canceled. %d\n",
-			       instance->status);
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait for IDLE interrupted.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		*status = ME_STATUS_IDLE;
-	}
-
-	*values = me_circ_buf_space(&instance->circ_buf);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_stop(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int stop_mode, int flags)
-{				// Stop work and empty buffer and FIFO
-	int err = ME_ERRNO_SUCCESS;
-	me4600_ao_subdevice_t *instance;
-	unsigned long cpu_flags;
-	volatile uint32_t ctrl;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags & ~ME_IO_STREAM_STOP_PRESERVE_BUFFERS) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((stop_mode != ME_STOP_MODE_IMMEDIATE)
-	    && (stop_mode != ME_STOP_MODE_LAST_VALUE)) {
-		PERROR("Invalid stop mode specified.\n");
-		return ME_ERRNO_INVALID_STOP_MODE;
-	}
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (instance->status < ao_status_stream_configured) {
-		//There is nothing to stop!
-		PERROR("Subdevice not in streaming mode. %d\n",
-		       instance->status);
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	//Mark as stopping. => Software stop.
-	instance->status = ao_status_stream_end_wait;
-
-	if (stop_mode == ME_STOP_MODE_IMMEDIATE) {	//Stopped now!
-		err = ao_stop_immediately(instance);
-	} else if (stop_mode == ME_STOP_MODE_LAST_VALUE) {
-		ctrl = inl(instance->ctrl_reg) & ME4600_AO_CTRL_MODE_MASK;
-		if (ctrl == ME4600_AO_MODE_WRAPAROUND) {	//Hardware wraparound => Hardware stop.
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |=
-			    ME4600_AO_CTRL_BIT_STOP |
-			    ME4600_AO_CTRL_BIT_RESET_IRQ;
-			ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-		}
-		//Only runing process will interrupt this call. Events are signaled when status change.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ao_status_stream_end_wait),
-						 LONG_MAX);
-
-		if (instance->status != ao_status_stream_end) {
-			PDEBUG("Stopping stream canceled.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Stopping stream interrupted.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		}
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	ctrl = inl(instance->ctrl_reg);
-	ctrl |=
-	    ME4600_AO_CTRL_BIT_STOP | ME4600_AO_CTRL_BIT_IMMEDIATE_STOP |
-	    ME4600_AO_CTRL_BIT_RESET_IRQ;
-	ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-	if (!flags) {		//Reset FIFO
-		ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_FIFO;
-	}
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	if (!flags) {		//Reset software buffer
-		instance->circ_buf.head = 0;
-		instance->circ_buf.tail = 0;
-		instance->preloaded_count = 0;
-		instance->data_count = 0;
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int write_mode,
-				     int *values, int *count, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me4600_ao_subdevice_t *instance;
-	unsigned long cpu_flags = 0;
-	uint32_t reg_copy;
-
-	int copied_from_user = 0;
-	int left_to_copy_from_user = *count;
-
-	int copied_values;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	//Checking arguments
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (*count <= 0) {
-		PERROR("Invalid count of values specified.\n");
-		return ME_ERRNO_INVALID_VALUE_COUNT;
-	}
-
-	if (values == NULL) {
-		PERROR("Invalid address of values specified.\n");
-		return ME_ERRNO_INVALID_POINTER;
-	}
-
-	if ((instance->status == ao_status_none) || (instance->status == ao_status_single_configured)) {	//The device is in single mode.
-		PERROR
-		    ("Subdevice must be preinitialize correctly for streaming.\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-/// @note If no 'pre-load' is used. stream_start() will move data to FIFO.
-	switch (write_mode) {
-	case ME_WRITE_MODE_PRELOAD:
-
-		//Device must be stopped.
-		if ((instance->status != ao_status_stream_configured)
-		    && (instance->status != ao_status_stream_end)) {
-			PERROR
-			    ("Subdevice mustn't be runing when 'pre-load' mode is used.\n");
-			return ME_ERRNO_PREVIOUS_CONFIG;
-		}
-		break;
-	case ME_WRITE_MODE_NONBLOCKING:
-	case ME_WRITE_MODE_BLOCKING:
-		/// @note In blocking mode: When device is not runing and there is not enought space call will blocked up!
-		/// @note Some other thread must empty buffer by starting engine.
-		break;
-
-	default:
-		PERROR("Invalid write mode specified.\n");
-		return ME_ERRNO_INVALID_WRITE_MODE;
-	}
-
-	if (instance->mode & ME4600_AO_WRAP_MODE) {	//Wraparound mode. Device must be stopped.
-		if ((instance->status != ao_status_stream_configured)
-		    && (instance->status != ao_status_stream_end)) {
-			PERROR
-			    ("Subdevice mustn't be runing when 'pre-load' mode is used.\n");
-			return ME_ERRNO_INVALID_WRITE_MODE;
-		}
-	}
-
-	if ((instance->mode == ME4600_AO_HW_WRAP_MODE) && (write_mode != ME_WRITE_MODE_PRELOAD)) {	// hardware wrap_around mode.
-		//This is transparent for user.
-		PDEBUG("Changing write_mode to ME_WRITE_MODE_PRELOAD.\n");
-		write_mode = ME_WRITE_MODE_PRELOAD;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (write_mode == ME_WRITE_MODE_PRELOAD) {	//Init enviroment - preload
-		spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-		reg_copy = inl(instance->ctrl_reg);
-		//Check FIFO
-		if (!(reg_copy & ME4600_AO_CTRL_BIT_ENABLE_FIFO)) {	//FIFO not active. Enable it.
-			reg_copy |= ME4600_AO_CTRL_BIT_ENABLE_FIFO;
-			outl(reg_copy, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   reg_copy);
-			instance->preloaded_count = 0;
-		}
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	}
-
-	while (1) {
-		//Copy to buffer. This step is common for all modes.
-		copied_from_user =
-		    ao_get_data_from_user(instance, left_to_copy_from_user,
-					  values + (*count -
-						    left_to_copy_from_user));
-		left_to_copy_from_user -= copied_from_user;
-
-		reg_copy = inl(instance->status_reg);
-		if ((instance->status == ao_status_stream_run) && !(reg_copy & ME4600_AO_STATUS_BIT_FSM)) {	//BROKEN PIPE! The state machine is stoped but logical status show that should be working.
-			PERROR("Broken pipe in write.\n");
-			err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-			break;
-		}
-
-		if ((instance->status == ao_status_stream_run) && (instance->mode == ME4600_AO_CONTINOUS) && (reg_copy & ME4600_AO_STATUS_BIT_HF)) {	//Continous mode runing and data are below half!
-
-			// Block interrupts.
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			reg_copy = inl(instance->ctrl_reg);
-			//reg_copy &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			reg_copy |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-			outl(reg_copy, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   reg_copy);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			//Fast copy
-			copied_values =
-			    ao_write_data(instance, ME4600_AO_FIFO_COUNT / 2,
-					  0);
-			if (copied_values > 0) {
-				instance->circ_buf.tail += copied_values;
-				instance->circ_buf.tail &=
-				    instance->circ_buf.mask;
-				continue;
-			}
-			// Activate interrupts.
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			reg_copy = inl(instance->ctrl_reg);
-			//reg_copy |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			reg_copy &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-			outl(reg_copy, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   reg_copy);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			if (copied_values == 0) {	//This was checked and never should happend!
-				PERROR_CRITICAL("COPING FINISH WITH 0!\n");
-			}
-
-			if (copied_values < 0) {	//This was checked and never should happend!
-				PERROR_CRITICAL
-				    ("COPING FINISH WITH AN ERROR!\n");
-				instance->status = ao_status_stream_fifo_error;
-				err = ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-				break;
-			}
-		}
-
-		if (!left_to_copy_from_user) {	//All datas were copied.
-			break;
-		} else {	//Not all datas were copied.
-			if (instance->mode & ME4600_AO_WRAP_MODE) {	//Error too much datas! Wraparound is limited in size!
-				PERROR
-				    ("Too much data for wraparound mode!  Exceeded size of %ld.\n",
-				     ME4600_AO_CIRC_BUF_COUNT - 1);
-				err = ME_ERRNO_RING_BUFFER_OVERFLOW;
-				break;
-			}
-
-			if (write_mode != ME_WRITE_MODE_BLOCKING) {	//Non blocking calls
-				break;
-			}
-
-			wait_event_interruptible(instance->wait_queue,
-						 me_circ_buf_space(&instance->
-								   circ_buf));
-
-			if (signal_pending(current)) {
-				PERROR("Writing interrupted by signal.\n");
-				instance->status = ao_status_none;
-				ao_stop_immediately(instance);
-				err = ME_ERRNO_SIGNAL;
-				break;
-			}
-
-			if (instance->status == ao_status_none) {	//Reset
-				PERROR("Writing interrupted by reset.\n");
-				err = ME_ERRNO_CANCELLED;
-				break;
-			}
-		}
-	}
-
-	if (write_mode == ME_WRITE_MODE_PRELOAD) {	//Copy data to FIFO - preload
-		copied_values =
-		    ao_write_data_pooling(instance, ME4600_AO_FIFO_COUNT,
-					  instance->preloaded_count);
-		instance->preloaded_count += copied_values;
-		instance->data_count += copied_values;
-
-		if ((instance->mode == ME4600_AO_HW_WRAP_MODE)
-		    && (me_circ_buf_values(&instance->circ_buf) >
-			ME4600_AO_FIFO_COUNT)) {
-			PERROR
-			    ("Too much data for hardware wraparound mode! Exceeded size of %d.\n",
-			     ME4600_AO_FIFO_COUNT);
-			err = ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-		}
-	}
-
-	*count = *count - left_to_copy_from_user;
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-static irqreturn_t me4600_ao_isr(int irq, void *dev_id)
-{
-	me4600_ao_subdevice_t *instance = dev_id;
-	uint32_t irq_status;
-	uint32_t ctrl;
-	uint32_t status;
-	int count = 0;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	irq_status = inl(instance->irq_status_reg);
-	if (!(irq_status & (ME4600_IRQ_STATUS_BIT_AO_HF << instance->ao_idx))) {
-		PINFO("%ld Shared interrupt. %s(): ID=%d: status_reg=0x%04X\n",
-		      jiffies, __func__, instance->ao_idx, irq_status);
-		return IRQ_NONE;
-	}
-
-	if (!instance->circ_buf.buf) {
-		instance->status = ao_status_stream_error;
-		PERROR_CRITICAL("CIRCULAR BUFFER NOT EXISTS!\n");
-		//Block interrupts. Stop machine.
-		ctrl = inl(instance->ctrl_reg);
-		ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-		ctrl |=
-		    ME4600_AO_CTRL_BIT_RESET_IRQ |
-		    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP | ME4600_AO_CTRL_BIT_STOP;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-
-		//Inform user
-		wake_up_interruptible_all(&instance->wait_queue);
-		return IRQ_HANDLED;
-	}
-
-	status = inl(instance->status_reg);
-	if (!(status & ME4600_AO_STATUS_BIT_FSM)) {	//Too late. Not working! END? BROKEN PIPE?
-		PDEBUG("Interrupt come but ISM is not working!\n");
-		//Block interrupts. Stop machine.
-		ctrl = inl(instance->ctrl_reg);
-		ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-		ctrl |=
-		    ME4600_AO_CTRL_BIT_RESET_IRQ | ME4600_AO_CTRL_BIT_STOP |
-		    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-
-		return IRQ_HANDLED;
-	}
-	//General procedure. Process more datas.
-
-#ifdef MEDEBUG_DEBUG
-	if (!me_circ_buf_values(&instance->circ_buf)) {	//Buffer is empty!
-		PDEBUG("Circular buffer empty!\n");
-	}
-#endif
-
-	//Check FIFO
-	if (status & ME4600_AO_STATUS_BIT_HF) {	//OK less than half
-
-		//Block interrupts
-		ctrl = inl(instance->ctrl_reg);
-		ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-		ctrl |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-
-		do {
-			//Calculate how many should be copied.
-			count =
-			    (instance->stop_data_count) ? instance->
-			    stop_data_count -
-			    instance->data_count : ME4600_AO_FIFO_COUNT / 2;
-			if (ME4600_AO_FIFO_COUNT / 2 < count) {
-				count = ME4600_AO_FIFO_COUNT / 2;
-			}
-			//Copy data
-			if (instance->mode == ME4600_AO_CONTINOUS) {	//Continous
-				count = ao_write_data(instance, count, 0);
-				if (count > 0) {
-					instance->circ_buf.tail += count;
-					instance->circ_buf.tail &=
-					    instance->circ_buf.mask;
-					instance->data_count += count;
-
-					if ((instance->status == ao_status_stream_end_wait) && !me_circ_buf_values(&instance->circ_buf)) {	//Stoping. Whole buffer was copied.
-						break;
-					}
-				}
-			} else if ((instance->mode == ME4600_AO_SW_WRAP_MODE) && ((ctrl & ME4600_AO_CTRL_MODE_MASK) == ME4600_AO_MODE_CONTINUOUS)) {	//Wraparound (software)
-				if (instance->status == ao_status_stream_end_wait) {	//We stoping => Copy to the end of the buffer.
-					count =
-					    ao_write_data(instance, count, 0);
-				} else {	//Copy in wraparound mode.
-					count =
-					    ao_write_data_wraparound(instance,
-								     count,
-								     instance->
-								     preloaded_count);
-				}
-
-				if (count > 0) {
-					instance->data_count += count;
-					instance->preloaded_count += count;
-					instance->preloaded_count %=
-					    me_circ_buf_values(&instance->
-							       circ_buf);
-
-					if ((instance->status == ao_status_stream_end_wait) && !instance->preloaded_count) {	//Stoping. Whole buffer was copied.
-						break;
-					}
-				}
-			}
-
-			if ((count <= 0) || (instance->stop_data_count && (instance->stop_data_count <= instance->data_count))) {	//End of work.
-				break;
-			}
-		}		//Repeat if still is under half fifo
-		while ((status =
-			inl(instance->status_reg)) & ME4600_AO_STATUS_BIT_HF);
-
-		//Unblock interrupts
-		ctrl = inl(instance->ctrl_reg);
-		if (count >= 0) {	//Copy was successful.
-			if (instance->stop_data_count && (instance->stop_data_count <= instance->data_count)) {	//Finishing work. No more interrupts.
-				PDEBUG("Finishing work. Interrupt disabled.\n");
-				instance->status = ao_status_stream_end_wait;
-			} else if (count > 0) {	//Normal work. Enable interrupt.
-				PDEBUG("Normal work. Enable interrupt.\n");
-				ctrl &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-				ctrl |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			} else {	//Normal work but there are no more data in buffer. Interrupt active but blocked. stream_write() will unblock it.
-				PDEBUG
-				    ("No data in software buffer. Interrupt blocked.\n");
-				ctrl |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			}
-		} else {	//Error during copy.
-			instance->status = ao_status_stream_fifo_error;
-		}
-
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-	} else {		//?? more than half
-		PDEBUG
-		    ("Interrupt come but FIFO more than half full! Reset interrupt.\n");
-		//Reset pending interrupt
-		ctrl = inl(instance->ctrl_reg);
-		ctrl |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-		ctrl &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-	}
-
-	PINFO("ISR: Buffer count: %d.(T:%d H:%d)\n",
-	      me_circ_buf_values(&instance->circ_buf), instance->circ_buf.tail,
-	      instance->circ_buf.head);
-	PINFO("ISR: Stop count: %d.\n", instance->stop_count);
-	PINFO("ISR: Stop data count: %d.\n", instance->stop_data_count);
-	PINFO("ISR: Data count: %d.\n", instance->data_count);
-
-	//Inform user
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return IRQ_HANDLED;
-}
-
-static void me4600_ao_destructor(struct me_subdevice *subdevice)
-{
-	me4600_ao_subdevice_t *instance;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	instance->ao_control_task_flag = 0;
-
-	// Reset subdevice to asure clean exit.
-	me4600_ao_io_reset_subdevice(subdevice, NULL,
-				     ME_IO_RESET_SUBDEVICE_NO_FLAGS);
-
-	// Remove any tasks from work queue. This is paranoic because it was done allready in reset().
-	if (!cancel_delayed_work(&instance->ao_control_task)) {	//Wait 2 ticks to be sure that control task is removed from queue.
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(2);
-	}
-
-	if (instance->fifo) {
-		if (instance->irq) {
-			free_irq(instance->irq, instance);
-			instance->irq = 0;
-		}
-
-		if (instance->circ_buf.buf) {
-			free_pages((unsigned long)instance->circ_buf.buf,
-				   ME4600_AO_CIRC_BUF_SIZE_ORDER);
-		}
-		instance->circ_buf.buf = NULL;
-	}
-
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-me4600_ao_subdevice_t *me4600_ao_constructor(uint32_t reg_base,
-					     spinlock_t *preload_reg_lock,
-					     uint32_t *preload_flags,
-					     int ao_idx,
-					     int fifo,
-					     int irq,
-					     struct workqueue_struct *me4600_wq)
-{
-	me4600_ao_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed. idx=%d\n", ao_idx);
-
-	// Allocate memory for subdevice instance.
-	subdevice = kmalloc(sizeof(me4600_ao_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me4600_ao_subdevice_t));
-
-	// Initialize subdevice base class.
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->preload_reg_lock = preload_reg_lock;
-	subdevice->preload_flags = preload_flags;
-
-	// Store analog output index.
-	subdevice->ao_idx = ao_idx;
-
-	// Store if analog output has fifo.
-	subdevice->fifo = (ao_idx < fifo) ? 1 : 0;
-
-	if (subdevice->fifo) {	// Allocate and initialize circular buffer.
-		subdevice->circ_buf.mask = ME4600_AO_CIRC_BUF_COUNT - 1;
-
-		subdevice->circ_buf.buf =
-		    (void *)__get_free_pages(GFP_KERNEL,
-					     ME4600_AO_CIRC_BUF_SIZE_ORDER);
-		PDEBUG("circ_buf = %p size=%ld\n", subdevice->circ_buf.buf,
-		       ME4600_AO_CIRC_BUF_SIZE);
-
-		if (!subdevice->circ_buf.buf) {
-			PERROR
-			    ("Cannot initialize subdevice base class instance.\n");
-			kfree(subdevice);
-			return NULL;
-		}
-
-		memset(subdevice->circ_buf.buf, 0, ME4600_AO_CIRC_BUF_SIZE);
-	} else {		// No FIFO.
-		subdevice->circ_buf.mask = 0;
-		subdevice->circ_buf.buf = NULL;
-	}
-
-	subdevice->circ_buf.head = 0;
-	subdevice->circ_buf.tail = 0;
-
-	subdevice->status = ao_status_none;
-	subdevice->ao_control_task_flag = 0;
-	subdevice->timeout.delay = 0;
-	subdevice->timeout.start_time = jiffies;
-
-	// Initialize wait queue.
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	// Initialize single value to 0V.
-	subdevice->single_value = 0x8000;
-	subdevice->single_value_in_fifo = 0x8000;
-
-	// Register interrupt service routine.
-	if (subdevice->fifo) {
-		subdevice->irq = irq;
-		if (request_irq(subdevice->irq, me4600_ao_isr,
-				IRQF_DISABLED | IRQF_SHARED,
-				ME4600_NAME, subdevice)) {
-			PERROR("Cannot get interrupt line.\n");
-			PDEBUG("free circ_buf = %p size=%d",
-			       subdevice->circ_buf.buf,
-			       PAGE_SHIFT << ME4600_AO_CIRC_BUF_SIZE_ORDER);
-			free_pages((unsigned long)subdevice->circ_buf.buf,
-				   ME4600_AO_CIRC_BUF_SIZE_ORDER);
-			me_subdevice_deinit((me_subdevice_t *) subdevice);
-			kfree(subdevice);
-			return NULL;
-		}
-		PINFO("Registered irq=%d.\n", subdevice->irq);
-	} else {
-		subdevice->irq = 0;
-	}
-
-	// Initialize registers.
-	subdevice->irq_status_reg = reg_base + ME4600_IRQ_STATUS_REG;
-	subdevice->preload_reg = reg_base + ME4600_AO_SYNC_REG;
-	if (ao_idx == 0) {
-		subdevice->ctrl_reg = reg_base + ME4600_AO_00_CTRL_REG;
-		subdevice->status_reg = reg_base + ME4600_AO_00_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME4600_AO_00_FIFO_REG;
-		subdevice->single_reg = reg_base + ME4600_AO_00_SINGLE_REG;
-		subdevice->timer_reg = reg_base + ME4600_AO_00_TIMER_REG;
-		subdevice->reg_base = reg_base;
-		subdevice->bitpattern = 0;
-	} else if (ao_idx == 1) {
-		subdevice->ctrl_reg = reg_base + ME4600_AO_01_CTRL_REG;
-		subdevice->status_reg = reg_base + ME4600_AO_01_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME4600_AO_01_FIFO_REG;
-		subdevice->single_reg = reg_base + ME4600_AO_01_SINGLE_REG;
-		subdevice->timer_reg = reg_base + ME4600_AO_01_TIMER_REG;
-		subdevice->reg_base = reg_base;
-		subdevice->bitpattern = 0;
-	} else if (ao_idx == 2) {
-		subdevice->ctrl_reg = reg_base + ME4600_AO_02_CTRL_REG;
-		subdevice->status_reg = reg_base + ME4600_AO_02_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME4600_AO_02_FIFO_REG;
-		subdevice->single_reg = reg_base + ME4600_AO_02_SINGLE_REG;
-		subdevice->timer_reg = reg_base + ME4600_AO_02_TIMER_REG;
-		subdevice->reg_base = reg_base;
-		subdevice->bitpattern = 0;
-	} else if (ao_idx == 3) {
-		subdevice->ctrl_reg = reg_base + ME4600_AO_03_CTRL_REG;
-		subdevice->status_reg = reg_base + ME4600_AO_03_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME4600_AO_03_FIFO_REG;
-		subdevice->single_reg = reg_base + ME4600_AO_03_SINGLE_REG;
-		subdevice->timer_reg = reg_base + ME4600_AO_03_TIMER_REG;
-		subdevice->reg_base = reg_base;
-		subdevice->bitpattern = 1;
-	} else {
-		PERROR_CRITICAL("WRONG SUBDEVICE idx=%d!", ao_idx);
-		me_subdevice_deinit((me_subdevice_t *) subdevice);
-		if (subdevice->fifo) {
-			free_pages((unsigned long)subdevice->circ_buf.buf,
-				   ME4600_AO_CIRC_BUF_SIZE_ORDER);
-		}
-		subdevice->circ_buf.buf = NULL;
-		kfree(subdevice);
-		return NULL;
-	}
-
-	// Override base class methods.
-	subdevice->base.me_subdevice_destructor = me4600_ao_destructor;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me4600_ao_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me4600_ao_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me4600_ao_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me4600_ao_io_single_write;
-	subdevice->base.me_subdevice_io_stream_config =
-	    me4600_ao_io_stream_config;
-	subdevice->base.me_subdevice_io_stream_new_values =
-	    me4600_ao_io_stream_new_values;
-	subdevice->base.me_subdevice_io_stream_write =
-	    me4600_ao_io_stream_write;
-	subdevice->base.me_subdevice_io_stream_start =
-	    me4600_ao_io_stream_start;
-	subdevice->base.me_subdevice_io_stream_status =
-	    me4600_ao_io_stream_status;
-	subdevice->base.me_subdevice_io_stream_stop = me4600_ao_io_stream_stop;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me4600_ao_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me4600_ao_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me4600_ao_query_subdevice_caps;
-	subdevice->base.me_subdevice_query_subdevice_caps_args =
-	    me4600_ao_query_subdevice_caps_args;
-	subdevice->base.me_subdevice_query_range_by_min_max =
-	    me4600_ao_query_range_by_min_max;
-	subdevice->base.me_subdevice_query_number_ranges =
-	    me4600_ao_query_number_ranges;
-	subdevice->base.me_subdevice_query_range_info =
-	    me4600_ao_query_range_info;
-	subdevice->base.me_subdevice_query_timer = me4600_ao_query_timer;
-
-	// Prepare work queue
-	subdevice->me4600_workqueue = me4600_wq;
-
-/* workqueue API changed in kernel 2.6.20 */
-	INIT_DELAYED_WORK(&subdevice->ao_control_task,
-			  me4600_ao_work_control_task);
-
-	if (subdevice->fifo) {	// Set speed for single operations.
-		outl(ME4600_AO_MIN_CHAN_TICKS - 1, subdevice->timer_reg);
-		subdevice->hardware_stop_delay = HZ / 10;	//100ms
-	}
-
-	return subdevice;
-}
-
-/** @brief Stop presentation. Preserve FIFOs.
-*
-* @param instance The subdevice instance (pointer).
-*/
-inline int ao_stop_immediately(me4600_ao_subdevice_t *instance)
-{
-	unsigned long cpu_flags;
-	uint32_t ctrl;
-	int timeout;
-	int i;
-
-	timeout =
-	    (instance->hardware_stop_delay >
-	     (HZ / 10)) ? instance->hardware_stop_delay : HZ / 10;
-	for (i = 0; i <= timeout; i++) {
-		spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-		// Stop all actions. No conditions! Block interrupts. Leave FIFO untouched!
-		ctrl = inl(instance->ctrl_reg);
-		ctrl |=
-		    ME4600_AO_CTRL_BIT_STOP | ME4600_AO_CTRL_BIT_IMMEDIATE_STOP
-		    | ME4600_AO_CTRL_BIT_RESET_IRQ;
-		ctrl &=
-		    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-		      ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG);
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-		if (!(inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM)) {	// Exit.
-			break;
-		}
-		//Still working!
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(1);
-	}
-
-	if (i > timeout) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		return ME_ERRNO_INTERNAL;
-	}
-	return ME_ERRNO_SUCCESS;
-}
-
-/** @brief Copy data from circular buffer to fifo (fast) in wraparound.
-* @note This is time critical function. Checking is done at begining and end only.
-* @note The is not reasonable way to check how many walues was in FIFO at begining. The count must be managed externaly.
-*
-* @param instance The subdevice instance (pointer).
-* @param count Maximum number of copied data.
-* @param start_pos Position of the firs value in buffer.
-*
-* @return On success: Number of copied data.
-* @return On error/success: 0.	No datas were copied => no data in buffer.
-* @return On error: -ME_ERRNO_FIFO_BUFFER_OVERFLOW.
-*/
-inline int ao_write_data_wraparound(me4600_ao_subdevice_t *instance, int count,
-				    int start_pos)
-{				/// @note This is time critical function!
-	uint32_t status;
-	uint32_t value;
-	int pos =
-	    (instance->circ_buf.tail + start_pos) & instance->circ_buf.mask;
-	int local_count = count;
-	int i = 1;
-
-	if (count <= 0) {	//Wrong count!
-		return 0;
-	}
-
-	while (i < local_count) {
-		//Get value from buffer
-		value = *(instance->circ_buf.buf + pos);
-		//Prepare it
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-
-		pos++;
-		pos &= instance->circ_buf.mask;
-		if (pos == instance->circ_buf.head) {
-			pos = instance->circ_buf.tail;
-		}
-		i++;
-	}
-
-	status = inl(instance->status_reg);
-	if (!(status & ME4600_AO_STATUS_BIT_FF)) {	//FIFO is full before all datas were copied!
-		PERROR("FIFO was full before all datas were copied! idx=%d\n",
-		       instance->ao_idx);
-		return -ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-	} else {		//Add last value
-		value = *(instance->circ_buf.buf + pos);
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-	}
-
-	PINFO("WRAPAROUND LOADED %d values. idx=%d\n", local_count,
-	      instance->ao_idx);
-	return local_count;
-}
-
-/** @brief Copy data from software buffer to fifo (fast).
-* @note This is time critical function. Checking is done at begining and end only.
-* @note The is not reasonable way to check how many walues was in FIFO at begining. The count must be managed externaly.
-*
-* @param instance The subdevice instance (pointer).
-* @param count Maximum number of copied data.
-* @param start_pos Position of the firs value in buffer.
-*
-* @return On success: Number of copied data.
-* @return On error/success: 0.	No datas were copied => no data in buffer.
-* @return On error: -ME_ERRNO_FIFO_BUFFER_OVERFLOW.
-*/
-inline int ao_write_data(me4600_ao_subdevice_t *instance, int count,
-			 int start_pos)
-{				/// @note This is time critical function!
-	uint32_t status;
-	uint32_t value;
-	int pos =
-	    (instance->circ_buf.tail + start_pos) & instance->circ_buf.mask;
-	int local_count = count;
-	int max_count;
-	int i = 1;
-
-	if (count <= 0) {	//Wrong count!
-		return 0;
-	}
-
-	max_count = me_circ_buf_values(&instance->circ_buf) - start_pos;
-	if (max_count <= 0) {	//No data to copy!
-		return 0;
-	}
-
-	if (max_count < count) {
-		local_count = max_count;
-	}
-
-	while (i < local_count) {
-		//Get value from buffer
-		value = *(instance->circ_buf.buf + pos);
-		//Prepare it
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-
-		pos++;
-		pos &= instance->circ_buf.mask;
-		i++;
-	}
-
-	status = inl(instance->status_reg);
-	if (!(status & ME4600_AO_STATUS_BIT_FF)) {	//FIFO is full before all datas were copied!
-		PERROR("FIFO was full before all datas were copied! idx=%d\n",
-		       instance->ao_idx);
-		return -ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-	} else {		//Add last value
-		value = *(instance->circ_buf.buf + pos);
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-	}
-
-	PINFO("FAST LOADED %d values. idx=%d\n", local_count, instance->ao_idx);
-	return local_count;
-}
-
-/** @brief Copy data from software buffer to fifo (slow).
-* @note This is slow function that copy all data from buffer to FIFO with full control.
-*
-* @param instance The subdevice instance (pointer).
-* @param count Maximum number of copied data.
-* @param start_pos Position of the firs value in buffer.
-*
-* @return On success: Number of copied values.
-* @return On error/success: 0.	FIFO was full at begining.
-* @return On error: -ME_ERRNO_RING_BUFFER_UNDEFFLOW.
-*/
-inline int ao_write_data_pooling(me4600_ao_subdevice_t *instance, int count,
-				 int start_pos)
-{				/// @note This is slow function!
-	uint32_t status;
-	uint32_t value;
-	int pos =
-	    (instance->circ_buf.tail + start_pos) & instance->circ_buf.mask;
-	int local_count = count;
-	int i;
-	int max_count;
-
-	if (count <= 0) {	//Wrong count!
-		PERROR("SLOW LOADED: Wrong count! idx=%d\n", instance->ao_idx);
-		return 0;
-	}
-
-	max_count = me_circ_buf_values(&instance->circ_buf) - start_pos;
-	if (max_count <= 0) {	//No data to copy!
-		PERROR("SLOW LOADED: No data to copy! idx=%d\n",
-		       instance->ao_idx);
-		return 0;
-	}
-
-	if (max_count < count) {
-		local_count = max_count;
-	}
-
-	for (i = 0; i < local_count; i++) {
-		status = inl(instance->status_reg);
-		if (!(status & ME4600_AO_STATUS_BIT_FF)) {	//FIFO is full!
-			return i;
-		}
-		//Get value from buffer
-		value = *(instance->circ_buf.buf + pos);
-		//Prepare it
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-
-		pos++;
-		pos &= instance->circ_buf.mask;
-	}
-
-	PINFO("SLOW LOADED %d values. idx=%d\n", local_count, instance->ao_idx);
-	return local_count;
-}
-
-/** @brief Copy data from user space to circular buffer.
-* @param instance The subdevice instance (pointer).
-* @param count Number of datas in user space.
-* @param user_values Buffer's pointer.
-*
-* @return On success: Number of copied values.
-* @return On error: -ME_ERRNO_INTERNAL.
-*/
-inline int ao_get_data_from_user(me4600_ao_subdevice_t *instance, int count,
-				 int *user_values)
-{
-	int i, err;
-	int empty_space;
-	int copied;
-	int value;
-
-	empty_space = me_circ_buf_space(&instance->circ_buf);
-	//We have only this space free.
-	copied = (count < empty_space) ? count : empty_space;
-	for (i = 0; i < copied; i++) {	//Copy from user to buffer
-		if ((err = get_user(value, (int *)(user_values + i)))) {
-			PERROR
-			    ("BUFFER LOADED: get_user(0x%p) return an error: %d. idx=%d\n",
-			     user_values + i, err, instance->ao_idx);
-			return -ME_ERRNO_INTERNAL;
-		}
-		/// @note The analog output in me4600 series has size of 16 bits.
-		*(instance->circ_buf.buf + instance->circ_buf.head) =
-		    (uint16_t) value;
-		instance->circ_buf.head++;
-		instance->circ_buf.head &= instance->circ_buf.mask;
-	}
-
-	PINFO("BUFFER LOADED %d values. idx=%d\n", copied, instance->ao_idx);
-	return copied;
-}
-
-/** @brief Checking actual hardware and logical state.
-* @param instance The subdevice instance (pointer).
-*/
-static void me4600_ao_work_control_task(struct work_struct *work)
-{
-	me4600_ao_subdevice_t *instance;
-	unsigned long cpu_flags = 0;
-	uint32_t status;
-	uint32_t ctrl;
-	uint32_t synch;
-	int reschedule = 0;
-	int signaling = 0;
-
-	instance =
-	    container_of((void *)work, me4600_ao_subdevice_t, ao_control_task);
-	PINFO("<%s: %ld> executed. idx=%d\n", __func__, jiffies,
-	      instance->ao_idx);
-
-	status = inl(instance->status_reg);
-	PDEBUG_REG("status_reg inl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->status_reg - instance->reg_base, status);
-
-	switch (instance->status) {	// Checking actual mode.
-
-		// Not configured for work.
-	case ao_status_none:
-		break;
-
-		//This are stable modes. No need to do anything. (?)
-	case ao_status_single_configured:
-	case ao_status_stream_configured:
-	case ao_status_stream_fifo_error:
-	case ao_status_stream_buffer_error:
-	case ao_status_stream_error:
-		PERROR("Shouldn't be running!.\n");
-		break;
-
-	case ao_status_stream_end:
-		if (!instance->fifo) {
-			PERROR_CRITICAL
-			    ("Streaming on single device! This feature is not implemented in this version!\n");
-			instance->status = ao_status_stream_error;
-			// Signal the end.
-			signaling = 1;
-			break;
-		}
-	case ao_status_single_end:
-		if (status & ME4600_AO_STATUS_BIT_FSM) {	// State machine is working but the status is set to end. Force stop.
-
-			// Wait for stop.
-			reschedule = 1;
-		}
-
-		spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-		// Stop all actions. No conditions! Block interrupts and trigger. Leave FIFO untouched!
-		ctrl = inl(instance->ctrl_reg);
-		ctrl |=
-		    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP | ME4600_AO_CTRL_BIT_STOP
-		    | ME4600_AO_CTRL_BIT_RESET_IRQ;
-		ctrl &=
-		    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-		      ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG);
-		ctrl &=
-		    ~(ME4600_AO_CTRL_BIT_EX_TRIG_EDGE |
-		      ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH);
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-		break;
-
-		// Single modes
-	case ao_status_single_run_wait:
-	case ao_status_single_run:
-	case ao_status_single_end_wait:
-
-		if (!(status & ME4600_AO_STATUS_BIT_FSM)) {	// State machine is not working.
-			if (((instance->fifo)
-			     && (!(status & ME4600_AO_STATUS_BIT_EF)))
-			    || (!(instance->fifo))) {	// Single is in end state.
-				PDEBUG("Single call has been complited.\n");
-
-				// Set correct value for single_read();
-				instance->single_value =
-				    instance->single_value_in_fifo;
-
-				// Set status as 'ao_status_single_end'
-				instance->status = ao_status_single_end;
-
-				// Signal the end.
-				signaling = 1;
-				// Wait for stop ISM.
-				reschedule = 1;
-
-				break;
-			}
-		}
-		// Check timeout.
-		if ((instance->timeout.delay) && ((jiffies - instance->timeout.start_time) >= instance->timeout.delay)) {	// Timeout
-			PDEBUG("Timeout reached.\n");
-			// Stop all actions. No conditions! Block interrupts and trigger. Leave FIFO untouched!
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |=
-			    ME4600_AO_CTRL_BIT_STOP |
-			    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP |
-			    ME4600_AO_CTRL_BIT_RESET_IRQ;
-			ctrl &=
-			    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-			      ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG);
-			/// Fix for timeout error.
-			ctrl &=
-			    ~(ME4600_AO_CTRL_BIT_EX_TRIG_EDGE |
-			      ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH);
-			if (instance->fifo) {	//Disabling FIFO
-				ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_FIFO;
-			}
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			spin_lock(instance->preload_reg_lock);
-			//Remove from synchronous start. Block triggering from this output.
-			synch = inl(instance->preload_reg);
-			synch &=
-			    ~((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) <<
-			      instance->ao_idx);
-			if (!(instance->fifo)) {	// No FIFO - set to single safe mode
-				synch |=
-				    ME4600_AO_SYNC_HOLD << instance->ao_idx;
-			}
-			outl(synch, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   synch);
-			spin_unlock(instance->preload_reg_lock);
-
-			if (!(instance->fifo)) {	// No FIFO
-				// Restore old settings.
-				PDEBUG("Write old value back to register.\n");
-				outl(instance->single_value,
-				     instance->single_reg);
-				PDEBUG_REG
-				    ("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->single_reg - instance->reg_base,
-				     instance->single_value);
-			}
-			// Set correct value for single_read();
-			instance->single_value_in_fifo = instance->single_value;
-
-			instance->status = ao_status_single_end;
-
-			// Signal the end.
-			signaling = 1;
-		}
-		// Wait for stop.
-		reschedule = 1;
-		break;
-
-		// Stream modes
-	case ao_status_stream_run_wait:
-		if (!instance->fifo) {
-			PERROR_CRITICAL
-			    ("Streaming on single device! This feature is not implemented in this version!\n");
-			instance->status = ao_status_stream_error;
-			// Signal the end.
-			signaling = 1;
-			break;
-		}
-
-		if (status & ME4600_AO_STATUS_BIT_FSM) {	// State machine is working. Waiting for start finish.
-			instance->status = ao_status_stream_run;
-
-			// Signal end of this step
-			signaling = 1;
-		} else {	// State machine is not working.
-			if (!(status & ME4600_AO_STATUS_BIT_EF)) {	// FIFO is empty. Procedure has started and finish already!
-				instance->status = ao_status_stream_end;
-
-				// Signal the end.
-				signaling = 1;
-				// Wait for stop.
-				reschedule = 1;
-				break;
-			}
-		}
-
-		// Check timeout.
-		if ((instance->timeout.delay) && ((jiffies - instance->timeout.start_time) >= instance->timeout.delay)) {	// Timeout
-			PDEBUG("Timeout reached.\n");
-			// Stop all actions. No conditions! Block interrupts. Leave FIFO untouched!
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |=
-			    ME4600_AO_CTRL_BIT_STOP |
-			    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP |
-			    ME4600_AO_CTRL_BIT_RESET_IRQ;
-			ctrl &=
-			    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-			      ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG);
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-			spin_lock(instance->preload_reg_lock);
-			//Remove from synchronous start. Block triggering from this output.
-			synch = inl(instance->preload_reg);
-			synch &=
-			    ~((ME4600_AO_SYNC_HOLD | ME4600_AO_SYNC_EXT_TRIG) <<
-			      instance->ao_idx);
-			outl(synch, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   synch);
-			spin_unlock(instance->preload_reg_lock);
-
-			instance->status = ao_status_stream_end;
-
-			// Signal the end.
-			signaling = 1;
-		}
-		// Wait for stop.
-		reschedule = 1;
-		break;
-
-	case ao_status_stream_run:
-		if (!instance->fifo) {
-			PERROR_CRITICAL
-			    ("Streaming on single device! This feature is not implemented in this version!\n");
-			instance->status = ao_status_stream_error;
-			// Signal the end.
-			signaling = 1;
-			break;
-		}
-
-		if (!(status & ME4600_AO_STATUS_BIT_FSM)) {	// State machine is not working. This is an error.
-			// BROKEN PIPE!
-			if (!(status & ME4600_AO_STATUS_BIT_EF)) {	// FIFO is empty.
-				if (me_circ_buf_values(&instance->circ_buf)) {	// Software buffer is not empty.
-					if (instance->stop_data_count && (instance->stop_data_count <= instance->data_count)) {	//Finishing work. Requed data shown.
-						PDEBUG
-						    ("ISM stoped. No data in FIFO. Buffer is not empty.\n");
-						instance->status =
-						    ao_status_stream_end;
-					} else {
-						PERROR
-						    ("Output stream has been broken. ISM stoped. No data in FIFO. Buffer is not empty.\n");
-						instance->status =
-						    ao_status_stream_buffer_error;
-					}
-				} else {	// Software buffer is empty.
-					PDEBUG
-					    ("ISM stoped. No data in FIFO. Buffer is empty.\n");
-					instance->status = ao_status_stream_end;
-				}
-			} else {	// There are still datas in FIFO.
-				if (me_circ_buf_values(&instance->circ_buf)) {	// Software buffer is not empty.
-					PERROR
-					    ("Output stream has been broken. ISM stoped but some data in FIFO and buffer.\n");
-				} else {	// Software buffer is empty.
-					PERROR
-					    ("Output stream has been broken. ISM stoped but some data in FIFO. Buffer is empty.\n");
-				}
-				instance->status = ao_status_stream_fifo_error;
-
-			}
-
-			// Signal the failure.
-			signaling = 1;
-			break;
-		}
-		// Wait for stop.
-		reschedule = 1;
-		break;
-
-	case ao_status_stream_end_wait:
-		if (!instance->fifo) {
-			PERROR_CRITICAL
-			    ("Streaming on single device! This feature is not implemented in this version!\n");
-			instance->status = ao_status_stream_error;
-			// Signal the end.
-			signaling = 1;
-			break;
-		}
-
-		if (!(status & ME4600_AO_STATUS_BIT_FSM)) {	// State machine is not working. Waiting for stop finish.
-			instance->status = ao_status_stream_end;
-			signaling = 1;
-		}
-		// State machine is working.
-		reschedule = 1;
-		break;
-
-	default:
-		PERROR_CRITICAL("Status is in wrong state (%d)!\n",
-				instance->status);
-		instance->status = ao_status_stream_error;
-		// Signal the end.
-		signaling = 1;
-		break;
-
-	}
-
-	if (signaling) {	//Signal it.
-		wake_up_interruptible_all(&instance->wait_queue);
-	}
-
-	if (instance->ao_control_task_flag && reschedule) {	// Reschedule task
-		queue_delayed_work(instance->me4600_workqueue,
-				   &instance->ao_control_task, 1);
-	} else {
-		PINFO("<%s> Ending control task.\n", __func__);
-	}
-
-}
-#else
-/// @note SPECIAL BUILD FOR BOSCH
-/// @author Guenter Gebhardt
-static int me4600_ao_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t tmp;
-	unsigned long status;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER spin_lock_irqsave(&instance->subdevice_lock, status);
-	spin_lock(instance->preload_reg_lock);
-	tmp = inl(instance->preload_reg);
-	tmp &= ~(0x10001 << instance->ao_idx);
-	outl(tmp, instance->preload_reg);
-	*instance->preload_flags &= ~(0x1 << instance->ao_idx);
-	spin_unlock(instance->preload_reg_lock);
-
-	tmp = inl(instance->ctrl_reg);
-	tmp |= ME4600_AO_CTRL_BIT_STOP | ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-	outl(tmp, instance->ctrl_reg);
-
-	while (inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM) ;
-
-	outl(ME4600_AO_CTRL_BIT_STOP | ME4600_AO_CTRL_BIT_IMMEDIATE_STOP,
-	     instance->ctrl_reg);
-
-	outl(0x8000, instance->single_reg);
-
-	instance->single_value = 0x8000;
-	instance->circ_buf.head = 0;
-	instance->circ_buf.tail = 0;
-
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t tmp;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER
-	    spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	if (inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM) {
-		PERROR("Subdevice is busy.\n");
-		err = ME_ERRNO_SUBDEVICE_BUSY;
-		goto ERROR;
-	}
-
-	if (channel == 0) {
-		if (single_config == 0) {
-			if (ref == ME_REF_AO_GROUND) {
-				if (trig_chan == ME_TRIG_CHAN_DEFAULT) {
-					if (trig_type == ME_TRIG_TYPE_SW) {
-						tmp = inl(instance->ctrl_reg);
-						tmp |=
-						    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-						outl(tmp, instance->ctrl_reg);
-						tmp =
-						    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-						outl(tmp, instance->ctrl_reg);
-
-						spin_lock(instance->
-							  preload_reg_lock);
-						tmp =
-						    inl(instance->preload_reg);
-						tmp &=
-						    ~(0x10001 << instance->
-						      ao_idx);
-						outl(tmp,
-						     instance->preload_reg);
-						*instance->preload_flags &=
-						    ~(0x1 << instance->ao_idx);
-						spin_unlock(instance->
-							    preload_reg_lock);
-					} else if (trig_type ==
-						   ME_TRIG_TYPE_EXT_DIGITAL) {
-						if (trig_edge ==
-						    ME_TRIG_EDGE_RISING) {
-							tmp =
-							    inl(instance->
-								ctrl_reg);
-							tmp |=
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-							tmp =
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP
-							    |
-							    ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-						} else if (trig_edge ==
-							   ME_TRIG_EDGE_FALLING)
-						{
-							tmp =
-							    inl(instance->
-								ctrl_reg);
-							tmp |=
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-							tmp =
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP
-							    |
-							    ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG
-							    |
-							    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-						} else if (trig_edge ==
-							   ME_TRIG_EDGE_ANY) {
-							tmp =
-							    inl(instance->
-								ctrl_reg);
-							tmp |=
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-							tmp =
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP
-							    |
-							    ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG
-							    |
-							    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE
-							    |
-							    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-						} else {
-							PERROR
-							    ("Invalid trigger edge.\n");
-							err =
-							    ME_ERRNO_INVALID_TRIG_EDGE;
-							goto ERROR;
-						}
-
-						spin_lock(instance->
-							  preload_reg_lock);
-
-						tmp =
-						    inl(instance->preload_reg);
-						tmp &=
-						    ~(0x10001 << instance->
-						      ao_idx);
-						tmp |= 0x1 << instance->ao_idx;
-						outl(tmp,
-						     instance->preload_reg);
-						*instance->preload_flags &=
-						    ~(0x1 << instance->ao_idx);
-						spin_unlock(instance->
-							    preload_reg_lock);
-					} else {
-						PERROR
-						    ("Invalid trigger type.\n");
-						err =
-						    ME_ERRNO_INVALID_TRIG_TYPE;
-						goto ERROR;
-					}
-				} else if (trig_chan ==
-					   ME_TRIG_CHAN_SYNCHRONOUS) {
-					if (trig_type == ME_TRIG_TYPE_SW) {
-						tmp = inl(instance->ctrl_reg);
-						tmp |=
-						    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-						outl(tmp, instance->ctrl_reg);
-						tmp =
-						    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-						outl(tmp, instance->ctrl_reg);
-
-						spin_lock(instance->
-							  preload_reg_lock);
-						tmp =
-						    inl(instance->preload_reg);
-						tmp &=
-						    ~(0x10001 << instance->
-						      ao_idx);
-						tmp |= 0x1 << instance->ao_idx;
-						outl(tmp,
-						     instance->preload_reg);
-						*instance->preload_flags |=
-						    0x1 << instance->ao_idx;
-						spin_unlock(instance->
-							    preload_reg_lock);
-					} else if (trig_type ==
-						   ME_TRIG_TYPE_EXT_DIGITAL) {
-						if (trig_edge ==
-						    ME_TRIG_EDGE_RISING) {
-							tmp =
-							    inl(instance->
-								ctrl_reg);
-							tmp |=
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-							tmp =
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-						} else if (trig_edge ==
-							   ME_TRIG_EDGE_FALLING)
-						{
-							tmp =
-							    inl(instance->
-								ctrl_reg);
-							tmp |=
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-							tmp =
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP
-							    |
-							    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-						} else if (trig_edge ==
-							   ME_TRIG_EDGE_ANY) {
-							tmp =
-							    inl(instance->
-								ctrl_reg);
-							tmp |=
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-							tmp =
-							    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP
-							    |
-							    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE
-							    |
-							    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-							outl(tmp,
-							     instance->
-							     ctrl_reg);
-						} else {
-							PERROR
-							    ("Invalid trigger edge.\n");
-							err =
-							    ME_ERRNO_INVALID_TRIG_EDGE;
-							goto ERROR;
-						}
-
-						spin_lock(instance->
-							  preload_reg_lock);
-
-						tmp =
-						    inl(instance->preload_reg);
-						tmp |=
-						    0x10001 << instance->ao_idx;
-						outl(tmp,
-						     instance->preload_reg);
-						*instance->preload_flags &=
-						    ~(0x1 << instance->ao_idx);
-						spin_unlock(instance->
-							    preload_reg_lock);
-					} else {
-						PERROR
-						    ("Invalid trigger type.\n");
-						err =
-						    ME_ERRNO_INVALID_TRIG_TYPE;
-						goto ERROR;
-					}
-				} else {
-					PERROR
-					    ("Invalid trigger channel specified.\n");
-					err = ME_ERRNO_INVALID_REF;
-					goto ERROR;
-				}
-			} else {
-				PERROR("Invalid analog reference specified.\n");
-				err = ME_ERRNO_INVALID_REF;
-				goto ERROR;
-			}
-		} else {
-			PERROR("Invalid single config specified.\n");
-			err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			goto ERROR;
-		}
-	} else {
-		PERROR("Invalid channel number specified.\n");
-		err = ME_ERRNO_INVALID_CHANNEL;
-		goto ERROR;
-	}
-
-ERROR:
-
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long tmp;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	if (channel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER
-	    spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	tmp = inl(instance->ctrl_reg);
-
-	if (tmp & 0x3) {
-		PERROR("Not in single mode.\n");
-		err = ME_ERRNO_PREVIOUS_CONFIG;
-	} else {
-		*value = instance->single_value;
-	}
-
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long mask = 0;
-	unsigned long tmp;
-	unsigned long cpu_flags;
-	int i;
-	wait_queue_head_t queue;
-	unsigned long j;
-	unsigned long delay = 0;
-
-	PDEBUG("executed.\n");
-
-	init_waitqueue_head(&queue);
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	if (channel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-
-		if (delay == 0)
-			delay = 1;
-	}
-
-	ME_SUBDEVICE_ENTER
-	    spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	tmp = inl(instance->ctrl_reg);
-
-	if (tmp & 0x3) {
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-		PERROR("Not in single mode.\n");
-		err = ME_ERRNO_PREVIOUS_CONFIG;
-		goto ERROR;
-	}
-
-	if (tmp & ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG) {
-		outl(value, instance->single_reg);
-		instance->single_value = value;
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-		if (!(flags & ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING)) {
-			j = jiffies;
-
-			while (inl(instance->status_reg) &
-			       ME4600_AO_STATUS_BIT_FSM) {
-				interruptible_sleep_on_timeout(&queue, 1);
-
-				if (signal_pending(current)) {
-					PERROR
-					    ("Wait on external trigger interrupted by signal.\n");
-					err = ME_ERRNO_SIGNAL;
-					goto ERROR;
-				}
-
-				if (delay && ((jiffies - j) > delay)) {
-					PERROR("Timeout reached.\n");
-					err = ME_ERRNO_TIMEOUT;
-					goto ERROR;
-				}
-			}
-		}
-	} else if ((inl(instance->preload_reg) & (0x10001 << instance->ao_idx))
-		   == (0x10001 << instance->ao_idx)) {
-		if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {
-			tmp |= ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-			outl(tmp, instance->ctrl_reg);
-			outl(value, instance->single_reg);
-			instance->single_value = value;
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			if (!(flags & ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING)) {
-				j = jiffies;
-
-				while (inl(instance->status_reg) &
-				       ME4600_AO_STATUS_BIT_FSM) {
-					interruptible_sleep_on_timeout(&queue,
-								       1);
-
-					if (signal_pending(current)) {
-						PERROR
-						    ("Wait on external trigger interrupted by signal.\n");
-						err = ME_ERRNO_SIGNAL;
-						goto ERROR;
-					}
-
-					if (delay && ((jiffies - j) > delay)) {
-						PERROR("Timeout reached.\n");
-						err = ME_ERRNO_TIMEOUT;
-						goto ERROR;
-					}
-				}
-			}
-		} else {
-			outl(value, instance->single_reg);
-			instance->single_value = value;
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-		}
-	} else if ((inl(instance->preload_reg) & (0x10001 << instance->ao_idx))
-		   == (0x1 << instance->ao_idx)) {
-		outl(value, instance->single_reg);
-		instance->single_value = value;
-
-		PDEBUG("Synchronous SW, flags = 0x%X.\n", flags);
-
-		if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {
-			PDEBUG("Trigger synchronous SW.\n");
-			spin_lock(instance->preload_reg_lock);
-			tmp = inl(instance->preload_reg);
-
-			for (i = 0; i < ME4600_AO_MAX_SUBDEVICES; i++) {
-				if ((*instance->preload_flags & (0x1 << i))) {
-					if ((tmp & (0x10001 << i)) ==
-					    (0x1 << i)) {
-						mask |= 0x1 << i;
-					}
-				}
-			}
-
-			tmp &= ~(mask);
-
-			outl(tmp, instance->preload_reg);
-			spin_unlock(instance->preload_reg_lock);
-		}
-
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	} else {
-		outl(value, instance->single_reg);
-		instance->single_value = value;
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	}
-
-ERROR:
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      meIOStreamConfig_t *config_list,
-				      int count,
-				      meIOStreamTrigger_t *trigger,
-				      int fifo_irq_threshold, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long ctrl;
-	unsigned long tmp;
-	unsigned long cpu_flags;
-	uint64_t conv_ticks;
-	unsigned int conv_start_ticks_low = trigger->iConvStartTicksLow;
-	unsigned int conv_start_ticks_high = trigger->iConvStartTicksHigh;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	conv_ticks =
-	    (uint64_t) conv_start_ticks_low +
-	    ((uint64_t) conv_start_ticks_high << 32);
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	ME_SUBDEVICE_ENTER
-	    spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	if ((inl(instance->status_reg)) & ME4600_AO_STATUS_BIT_FSM) {
-		PERROR("Subdevice is busy.\n");
-		err = ME_ERRNO_SUBDEVICE_BUSY;
-		goto ERROR;
-	}
-
-	ctrl = inl(instance->ctrl_reg);
-	ctrl |= ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-	outl(ctrl, instance->ctrl_reg);
-	ctrl = ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-	outl(ctrl, instance->ctrl_reg);
-
-	if (count != 1) {
-		PERROR("Invalid stream configuration list count specified.\n");
-		err = ME_ERRNO_INVALID_CONFIG_LIST_COUNT;
-		goto ERROR;
-	}
-
-	if (config_list[0].iChannel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		err = ME_ERRNO_INVALID_CHANNEL;
-		goto ERROR;
-	}
-
-	if (config_list[0].iStreamConfig != 0) {
-		PERROR("Invalid stream config specified.\n");
-		err = ME_ERRNO_INVALID_STREAM_CONFIG;
-		goto ERROR;
-	}
-
-	if (config_list[0].iRef != ME_REF_AO_GROUND) {
-		PERROR("Invalid analog reference.\n");
-		err = ME_ERRNO_INVALID_REF;
-		goto ERROR;
-	}
-
-	if ((trigger->iAcqStartTicksLow != 0)
-	    || (trigger->iAcqStartTicksHigh != 0)) {
-		PERROR
-		    ("Invalid acquisition start trigger argument specified.\n");
-		err = ME_ERRNO_INVALID_ACQ_START_ARG;
-		goto ERROR;
-	}
-
-	switch (trigger->iAcqStartTrigType) {
-
-	case ME_TRIG_TYPE_SW:
-		break;
-
-	case ME_TRIG_TYPE_EXT_DIGITAL:
-		ctrl |= ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-
-		switch (trigger->iAcqStartTrigEdge) {
-
-		case ME_TRIG_EDGE_RISING:
-			break;
-
-		case ME_TRIG_EDGE_FALLING:
-			ctrl |= ME4600_AO_CTRL_BIT_EX_TRIG_EDGE;
-
-			break;
-
-		case ME_TRIG_EDGE_ANY:
-			ctrl |=
-			    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE |
-			    ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-
-			break;
-
-		default:
-			PERROR
-			    ("Invalid acquisition start trigger edge specified.\n");
-
-			err = ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE;
-
-			goto ERROR;
-
-			break;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid acquisition start trigger type specified.\n");
-
-		err = ME_ERRNO_INVALID_ACQ_START_TRIG_TYPE;
-
-		goto ERROR;
-
-		break;
-	}
-
-	switch (trigger->iScanStartTrigType) {
-
-	case ME_TRIG_TYPE_FOLLOW:
-		break;
-
-	default:
-		PERROR("Invalid scan start trigger type specified.\n");
-
-		err = ME_ERRNO_INVALID_SCAN_START_TRIG_TYPE;
-
-		goto ERROR;
-
-		break;
-	}
-
-	switch (trigger->iConvStartTrigType) {
-
-	case ME_TRIG_TYPE_TIMER:
-		if ((conv_ticks < ME4600_AO_MIN_CHAN_TICKS)
-		    || (conv_ticks > ME4600_AO_MAX_CHAN_TICKS)) {
-			PERROR
-			    ("Invalid conv start trigger argument specified.\n");
-			err = ME_ERRNO_INVALID_CONV_START_ARG;
-			goto ERROR;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid conv start trigger type specified.\n");
-
-		err = ME_ERRNO_INVALID_CONV_START_TRIG_TYPE;
-
-		goto ERROR;
-
-		break;
-	}
-
-	/* Preset to hardware wraparound mode */
-	instance->flags &= ~(ME4600_AO_FLAGS_SW_WRAP_MODE_MASK);
-
-	switch (trigger->iScanStopTrigType) {
-
-	case ME_TRIG_TYPE_NONE:
-		if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {
-			/* Set flags to indicate usage of software mode. */
-			instance->flags |= ME4600_AO_FLAGS_SW_WRAP_MODE_INF;
-			instance->wrap_count = 0;
-			instance->wrap_remaining = 0;
-		}
-
-		break;
-
-	case ME_TRIG_TYPE_COUNT:
-		if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {
-			if (trigger->iScanStopCount <= 0) {
-				PERROR("Invalid scan stop count specified.\n");
-				err = ME_ERRNO_INVALID_SCAN_STOP_ARG;
-				goto ERROR;
-			}
-
-			/* Set flags to indicate usage of software mode. */
-			instance->flags |= ME4600_AO_FLAGS_SW_WRAP_MODE_FIN;
-			instance->wrap_count = trigger->iScanStopCount;
-			instance->wrap_remaining = trigger->iScanStopCount;
-		} else {
-			PERROR("Invalid scan stop trigger type specified.\n");
-			err = ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-			goto ERROR;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid scan stop trigger type specified.\n");
-
-		err = ME_ERRNO_INVALID_SCAN_STOP_TRIG_TYPE;
-
-		goto ERROR;
-
-		break;
-	}
-
-	switch (trigger->iAcqStopTrigType) {
-
-	case ME_TRIG_TYPE_NONE:
-		break;
-
-	case ME_TRIG_TYPE_COUNT:
-		if (trigger->iScanStopTrigType != ME_TRIG_TYPE_NONE) {
-			PERROR("Invalid acq stop trigger type specified.\n");
-			err = ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-			goto ERROR;
-		}
-
-		if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {
-			if (trigger->iAcqStopCount <= 0) {
-				PERROR("Invalid acq stop count specified.\n");
-				err = ME_ERRNO_INVALID_ACQ_STOP_ARG;
-				goto ERROR;
-			}
-
-			/* Set flags to indicate usage of software mode. */
-			instance->flags |= ME4600_AO_FLAGS_SW_WRAP_MODE_FIN;
-			instance->wrap_count = trigger->iAcqStopCount;
-			instance->wrap_remaining = trigger->iAcqStopCount;
-		} else {
-			PERROR("Invalid acp stop trigger type specified.\n");
-			err = ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-			goto ERROR;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid acq stop trigger type specified.\n");
-		err = ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-		goto ERROR;
-		break;
-	}
-
-	switch (trigger->iAcqStartTrigChan) {
-
-	case ME_TRIG_CHAN_DEFAULT:
-		spin_lock(instance->preload_reg_lock);
-		tmp = inl(instance->preload_reg);
-		tmp &= ~(0x10001 << instance->ao_idx);
-		outl(tmp, instance->preload_reg);
-		spin_unlock(instance->preload_reg_lock);
-
-		break;
-
-	case ME_TRIG_CHAN_SYNCHRONOUS:
-		if (trigger->iAcqStartTrigType == ME_TRIG_TYPE_SW) {
-			spin_lock(instance->preload_reg_lock);
-			tmp = inl(instance->preload_reg);
-			tmp &= ~(0x10001 << instance->ao_idx);
-			outl(tmp, instance->preload_reg);
-			tmp |= 0x1 << instance->ao_idx;
-			outl(tmp, instance->preload_reg);
-			spin_unlock(instance->preload_reg_lock);
-		} else {
-			ctrl &= ~(ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG);
-			spin_lock(instance->preload_reg_lock);
-			tmp = inl(instance->preload_reg);
-			tmp &= ~(0x10001 << instance->ao_idx);
-			outl(tmp, instance->preload_reg);
-			tmp |= 0x10000 << instance->ao_idx;
-			outl(tmp, instance->preload_reg);
-			spin_unlock(instance->preload_reg_lock);
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid acq start trigger channel specified.\n");
-		err = ME_ERRNO_INVALID_ACQ_START_TRIG_CHAN;
-		goto ERROR;
-
-		break;
-	}
-
-	outl(conv_ticks - 2, instance->timer_reg);
-
-	if (flags & ME_IO_STREAM_CONFIG_BIT_PATTERN) {
-		if (instance->ao_idx == 3) {
-			ctrl |= ME4600_AO_CTRL_BIT_ENABLE_DO;
-		} else {
-			err = ME_ERRNO_INVALID_FLAGS;
-			goto ERROR;
-		}
-	} else {
-		if (instance->ao_idx == 3) {
-			ctrl &= ~ME4600_AO_CTRL_BIT_ENABLE_DO;
-		}
-	}
-
-	/* Set hardware mode. */
-	if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {
-		ctrl |= ME4600_AO_CTRL_BIT_MODE_0;
-	} else {
-		ctrl |= ME4600_AO_CTRL_BIT_MODE_1;
-	}
-
-	PDEBUG("Preload word = 0x%X.\n", inl(instance->preload_reg));
-
-	PDEBUG("Ctrl word = 0x%lX.\n", ctrl);
-	outl(ctrl, instance->ctrl_reg);	// Write the control word
-
-ERROR:
-
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_new_values(me_subdevice_t *subdevice,
-					  struct file *filep,
-					  int time_out, int *count, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	long t = 0;
-	long j;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		t = (time_out * HZ) / 1000;
-
-		if (t == 0)
-			t = 1;
-	}
-
-	*count = 0;
-
-	ME_SUBDEVICE_ENTER;
-
-	if (t) {
-		j = jiffies;
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 ((me_circ_buf_space
-						   (&instance->circ_buf))
-						  || !(inl(instance->status_reg)
-						       &
-						       ME4600_AO_STATUS_BIT_FSM)),
-						 t);
-
-		if (!(inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM)) {
-			PERROR("AO subdevice is not running.\n");
-			err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-		} else if (signal_pending(current)) {
-			PERROR("Wait on values interrupted from signal.\n");
-			err = ME_ERRNO_SIGNAL;
-		} else if ((jiffies - j) >= t) {
-			PERROR("Wait on values timed out.\n");
-			err = ME_ERRNO_TIMEOUT;
-		} else {
-			*count = me_circ_buf_space(&instance->circ_buf);
-		}
-	} else {
-		wait_event_interruptible(instance->wait_queue,
-					 ((me_circ_buf_space
-					   (&instance->circ_buf))
-					  || !(inl(instance->status_reg) &
-					       ME4600_AO_STATUS_BIT_FSM)));
-
-		if (!(inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM)) {
-			PERROR("AO subdevice is not running.\n");
-			err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-		} else if (signal_pending(current)) {
-			PERROR("Wait on values interrupted from signal.\n");
-			err = ME_ERRNO_SIGNAL;
-		} else {
-			*count = me_circ_buf_space(&instance->circ_buf);
-		}
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static void stop_immediately(me4600_ao_subdevice_t *instance)
-{
-	unsigned long cpu_flags;
-	uint32_t tmp;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	tmp = inl(instance->ctrl_reg);
-	tmp |= ME4600_AO_CTRL_BIT_STOP | ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-	outl(tmp, instance->ctrl_reg);
-
-	while (inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM) ;
-
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-}
-
-static int me4600_ao_io_stream_start(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int start_mode, int time_out, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags = 0;
-	unsigned long ref;
-	unsigned long tmp;
-	unsigned long delay = 0;
-	wait_queue_head_t queue;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	init_waitqueue_head(&queue);
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-
-		if (delay == 0)
-			delay = 1;
-	}
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	ME_SUBDEVICE_ENTER
-	    spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	tmp = inl(instance->ctrl_reg);
-
-	switch (tmp & (ME4600_AO_CTRL_MASK_MODE)) {
-
-	case 0:		// Single mode
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-		PERROR("Subdevice is configured in single mode.\n");
-		err = ME_ERRNO_PREVIOUS_CONFIG;
-		goto ERROR;
-
-	case 1:		// Wraparound mode
-		if (tmp & ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG) {	// Normal wraparound with external trigger
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR("Conversion is already running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			tmp &=
-			    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-			      ME4600_AO_CTRL_BIT_STOP |
-			      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-
-			outl(tmp, instance->ctrl_reg);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			if (start_mode == ME_START_MODE_BLOCKING) {
-				init_waitqueue_head(&queue);
-
-				if (delay) {
-					ref = jiffies;
-
-					while (!
-					       (inl(instance->status_reg) &
-						ME4600_AO_STATUS_BIT_FSM)) {
-						interruptible_sleep_on_timeout
-						    (&queue, 1);
-
-						if (signal_pending(current)) {
-							PERROR
-							    ("Wait on start of state machine interrupted.\n");
-							stop_immediately
-							    (instance);
-							err = ME_ERRNO_SIGNAL;
-							goto ERROR;
-						}
-
-						if (((jiffies - ref) >= delay)) {
-							PERROR
-							    ("Timeout reached.\n");
-							stop_immediately
-							    (instance);
-							err = ME_ERRNO_TIMEOUT;
-							goto ERROR;
-						}
-					}
-				} else {
-					while (!
-					       (inl(instance->status_reg) &
-						ME4600_AO_STATUS_BIT_FSM)) {
-						interruptible_sleep_on_timeout
-						    (&queue, 1);
-
-						if (signal_pending(current)) {
-							PERROR
-							    ("Wait on start of state machine interrupted.\n");
-							stop_immediately
-							    (instance);
-							err = ME_ERRNO_SIGNAL;
-							goto ERROR;
-						}
-					}
-				}
-			} else if (start_mode == ME_START_MODE_NONBLOCKING) {
-			} else {
-				PERROR("Invalid start mode specified.\n");
-				err = ME_ERRNO_INVALID_START_MODE;
-				goto ERROR;
-			}
-		} else if ((inl(instance->preload_reg) & (0x10001 << instance->ao_idx)) == (0x10000 << instance->ao_idx)) {	// Synchronous with external trigger
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR("Conversion is already running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			if (flags & ME_IO_STREAM_START_TYPE_TRIG_SYNCHRONOUS) {
-				tmp |= ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG;
-				tmp &=
-				    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-				      ME4600_AO_CTRL_BIT_STOP |
-				      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-				outl(tmp, instance->ctrl_reg);
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-
-				if (start_mode == ME_START_MODE_BLOCKING) {
-					init_waitqueue_head(&queue);
-
-					if (delay) {
-						ref = jiffies;
-
-						while (!
-						       (inl
-							(instance->
-							 status_reg) &
-							ME4600_AO_STATUS_BIT_FSM))
-						{
-							interruptible_sleep_on_timeout
-							    (&queue, 1);
-
-							if (signal_pending
-							    (current)) {
-								PERROR
-								    ("Wait on start of state machine interrupted.\n");
-								stop_immediately
-								    (instance);
-								err =
-								    ME_ERRNO_SIGNAL;
-								goto ERROR;
-							}
-
-							if (((jiffies - ref) >=
-							     delay)) {
-								PERROR
-								    ("Timeout reached.\n");
-								stop_immediately
-								    (instance);
-								err =
-								    ME_ERRNO_TIMEOUT;
-								goto ERROR;
-							}
-						}
-					} else {
-						while (!
-						       (inl
-							(instance->
-							 status_reg) &
-							ME4600_AO_STATUS_BIT_FSM))
-						{
-							interruptible_sleep_on_timeout
-							    (&queue, 1);
-
-							if (signal_pending
-							    (current)) {
-								PERROR
-								    ("Wait on start of state machine interrupted.\n");
-								stop_immediately
-								    (instance);
-								err =
-								    ME_ERRNO_SIGNAL;
-								goto ERROR;
-							}
-						}
-					}
-				} else if (start_mode ==
-					   ME_START_MODE_NONBLOCKING) {
-				} else {
-					PERROR
-					    ("Invalid start mode specified.\n");
-					err = ME_ERRNO_INVALID_START_MODE;
-					goto ERROR;
-				}
-			} else {
-				tmp &=
-				    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-				      ME4600_AO_CTRL_BIT_STOP |
-				      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-				outl(tmp, instance->ctrl_reg);
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-			}
-		} else if ((inl(instance->preload_reg) & (0x10001 << instance->ao_idx)) == (0x1 << instance->ao_idx)) {	// Synchronous wraparound with sw trigger
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR("Conversion is already running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			tmp &=
-			    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-			      ME4600_AO_CTRL_BIT_STOP |
-			      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-
-			outl(tmp, instance->ctrl_reg);
-
-			if (flags & ME_IO_STREAM_START_TYPE_TRIG_SYNCHRONOUS) {
-				outl(0x8000, instance->single_reg);
-				instance->single_value = 0x8000;
-			}
-
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-		} else {	// Software start
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR("Conversion is already running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			tmp &=
-			    ~(ME4600_AO_CTRL_BIT_ENABLE_IRQ |
-			      ME4600_AO_CTRL_BIT_STOP |
-			      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-
-			outl(tmp, instance->ctrl_reg);
-
-			outl(0x8000, instance->single_reg);
-			instance->single_value = 0x8000;
-
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-		}
-
-		break;
-
-	case 2:		// Continuous mode
-		if (tmp & ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG) {	// Externally triggered
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR("Conversion is already running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			tmp &=
-			    ~(ME4600_AO_CTRL_BIT_STOP |
-			      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-			tmp |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(tmp, instance->ctrl_reg);
-			instance->wrap_remaining = instance->wrap_count;
-			instance->circ_buf.tail = 0;
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			if (start_mode == ME_START_MODE_BLOCKING) {
-				init_waitqueue_head(&queue);
-
-				if (delay) {
-					ref = jiffies;
-
-					while (!
-					       (inl(instance->status_reg) &
-						ME4600_AO_STATUS_BIT_FSM)) {
-						interruptible_sleep_on_timeout
-						    (&queue, 1);
-
-						if (signal_pending(current)) {
-							PERROR
-							    ("Wait on start of state machine interrupted.\n");
-							stop_immediately
-							    (instance);
-							err = ME_ERRNO_SIGNAL;
-							goto ERROR;
-						}
-
-						if (((jiffies - ref) >= delay)) {
-							PERROR
-							    ("Timeout reached.\n");
-							stop_immediately
-							    (instance);
-							err = ME_ERRNO_TIMEOUT;
-							goto ERROR;
-						}
-					}
-				} else {
-					while (!
-					       (inl(instance->status_reg) &
-						ME4600_AO_STATUS_BIT_FSM)) {
-						interruptible_sleep_on_timeout
-						    (&queue, 1);
-
-						if (signal_pending(current)) {
-							PERROR
-							    ("Wait on start of state machine interrupted.\n");
-							stop_immediately
-							    (instance);
-							err = ME_ERRNO_SIGNAL;
-							goto ERROR;
-						}
-					}
-				}
-			} else if (start_mode == ME_START_MODE_NONBLOCKING) {
-				/* Do nothing */
-			} else {
-				PERROR("Invalid start mode specified.\n");
-				stop_immediately(instance);
-				err = ME_ERRNO_INVALID_START_MODE;
-				goto ERROR;
-			}
-		} else if ((inl(instance->preload_reg) & (0x10001 << instance->ao_idx)) == (0x10000 << instance->ao_idx)) {	// Synchronous with external trigger
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR("Conversion is already running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			if (flags & ME_IO_STREAM_START_TYPE_TRIG_SYNCHRONOUS) {
-				tmp |=
-				    ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG |
-				    ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-				tmp &=
-				    ~(ME4600_AO_CTRL_BIT_STOP |
-				      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-				outl(tmp, instance->ctrl_reg);
-				instance->wrap_remaining = instance->wrap_count;
-				instance->circ_buf.tail = 0;
-
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-
-				if (start_mode == ME_START_MODE_BLOCKING) {
-					init_waitqueue_head(&queue);
-
-					if (delay) {
-						ref = jiffies;
-
-						while (!
-						       (inl
-							(instance->
-							 status_reg) &
-							ME4600_AO_STATUS_BIT_FSM))
-						{
-							interruptible_sleep_on_timeout
-							    (&queue, 1);
-
-							if (signal_pending
-							    (current)) {
-								PERROR
-								    ("Wait on start of state machine interrupted.\n");
-								stop_immediately
-								    (instance);
-								err =
-								    ME_ERRNO_SIGNAL;
-								goto ERROR;
-							}
-
-							if (((jiffies - ref) >=
-							     delay)) {
-								PERROR
-								    ("Timeout reached.\n");
-								stop_immediately
-								    (instance);
-								err =
-								    ME_ERRNO_TIMEOUT;
-								goto ERROR;
-							}
-						}
-					} else {
-						while (!
-						       (inl
-							(instance->
-							 status_reg) &
-							ME4600_AO_STATUS_BIT_FSM))
-						{
-							interruptible_sleep_on_timeout
-							    (&queue, 1);
-
-							if (signal_pending
-							    (current)) {
-								PERROR
-								    ("Wait on start of state machine interrupted.\n");
-								stop_immediately
-								    (instance);
-								err =
-								    ME_ERRNO_SIGNAL;
-								goto ERROR;
-							}
-						}
-					}
-				} else if (start_mode ==
-					   ME_START_MODE_NONBLOCKING) {
-				} else {
-					PERROR
-					    ("Invalid start mode specified.\n");
-					stop_immediately(instance);
-					err = ME_ERRNO_INVALID_START_MODE;
-					goto ERROR;
-				}
-			} else {
-				tmp |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-				tmp &=
-				    ~(ME4600_AO_CTRL_BIT_STOP |
-				      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-				outl(tmp, instance->ctrl_reg);
-				instance->wrap_remaining = instance->wrap_count;
-				instance->circ_buf.tail = 0;
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-			}
-		} else if ((inl(instance->preload_reg) & (0x10001 << instance->ao_idx)) == (0x1 << instance->ao_idx)) {	// Synchronous wraparound with sw trigger
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR("Conversion is already running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			tmp &=
-			    ~(ME4600_AO_CTRL_BIT_STOP |
-			      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-			tmp |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			instance->wrap_remaining = instance->wrap_count;
-			instance->circ_buf.tail = 0;
-			PDEBUG("CTRL Reg = 0x%X.\n", inl(instance->ctrl_reg));
-			outl(tmp, instance->ctrl_reg);
-
-			if (flags & ME_IO_STREAM_START_TYPE_TRIG_SYNCHRONOUS) {
-				outl(0x8000, instance->single_reg);
-				instance->single_value = 0x8000;
-			}
-
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-		} else {	// Software start
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR("Conversion is already running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			tmp &=
-			    ~(ME4600_AO_CTRL_BIT_STOP |
-			      ME4600_AO_CTRL_BIT_IMMEDIATE_STOP);
-
-			tmp |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(tmp, instance->ctrl_reg);
-			outl(0x8000, instance->single_reg);
-			instance->single_value = 0x8000;
-			instance->wrap_remaining = instance->wrap_count;
-			instance->circ_buf.tail = 0;
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-		}
-
-		break;
-
-	default:
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-		PERROR("Invalid mode configured.\n");
-		err = ME_ERRNO_INTERNAL;
-		goto ERROR;
-	}
-
-ERROR:
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_status(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int wait,
-				      int *status, int *values, int flags)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	wait_queue_head_t queue;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	init_waitqueue_head(&queue);
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (wait == ME_WAIT_NONE) {
-		*status =
-		    (inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM) ?
-		    ME_STATUS_BUSY : ME_STATUS_IDLE;
-		*values = me_circ_buf_space(&instance->circ_buf);
-	} else if (wait == ME_WAIT_IDLE) {
-		while (inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM) {
-			interruptible_sleep_on_timeout(&queue, 1);
-
-			if (instance->flags & ME4600_AO_FLAGS_BROKEN_PIPE) {
-				PERROR("Output stream was interrupted.\n");
-				*status = ME_STATUS_ERROR;
-				err = ME_ERRNO_SUCCESS;
-				goto ERROR;
-			}
-
-			if (signal_pending(current)) {
-				PERROR
-				    ("Wait on state machine interrupted by signal.\n");
-				*status = ME_STATUS_INVALID;
-				err = ME_ERRNO_SIGNAL;
-				goto ERROR;
-			}
-		}
-
-		*status = ME_STATUS_IDLE;
-
-		*values = me_circ_buf_space(&instance->circ_buf);
-	} else {
-		PERROR("Invalid wait argument specified.\n");
-		*status = ME_STATUS_INVALID;
-		err = ME_ERRNO_INVALID_WAIT;
-		goto ERROR;
-	}
-
-ERROR:
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_stop(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int stop_mode, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me4600_ao_subdevice_t *instance;
-	unsigned long cpu_flags;
-	unsigned long tmp;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (stop_mode == ME_STOP_MODE_IMMEDIATE) {
-		spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-		tmp = inl(instance->ctrl_reg);
-		tmp |=
-		    ME4600_AO_CTRL_BIT_STOP | ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-		outl(tmp, instance->ctrl_reg);
-
-		while (inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM) ;
-
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	} else if (stop_mode == ME_STOP_MODE_LAST_VALUE) {
-		spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-		tmp = inl(instance->ctrl_reg);
-		tmp |= ME4600_AO_CTRL_BIT_STOP;
-		outl(tmp, instance->ctrl_reg);
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	} else {
-		PERROR("Invalid stop mode specified.\n");
-		err = ME_ERRNO_INVALID_STOP_MODE;
-		goto ERROR;
-	}
-
-ERROR:
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ao_io_stream_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int write_mode,
-				     int *values, int *count, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me4600_ao_subdevice_t *instance;
-	unsigned long tmp;
-	int i;
-	int value;
-	int cnt = *count;
-	int c;
-	int k;
-	int ret = 0;
-	unsigned long cpu_flags = 0;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	if (!instance->fifo) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (*count <= 0) {
-		PERROR("Invalid count of values specified.\n");
-		err = ME_ERRNO_INVALID_VALUE_COUNT;
-		goto ERROR;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	tmp = inl(instance->ctrl_reg);
-
-	switch (tmp & 0x3) {
-
-	case 1:		// Wraparound mode
-		if (instance->bosch_fw) {	// Bosch firmware
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			if (cnt != 7) {
-				PERROR
-				    ("Invalid count of values specified. 7 expected.\n");
-				err = ME_ERRNO_INVALID_VALUE_COUNT;
-				goto ERROR;
-			}
-
-			for (i = 0; i < 7; i++) {
-				if (get_user(value, values)) {
-					PERROR
-					    ("Can't copy value from user space.\n");
-					err = ME_ERRNO_INTERNAL;
-					goto ERROR;
-				}
-
-				if (i == 0) {
-					/* Maximum voltage */
-					value <<= 16;
-					value |=
-					    inl(instance->reg_base +
-						0xD4) & 0xFFFF;
-					outl(value, instance->reg_base + 0xD4);
-				} else if (i == 1) {
-					/* Minimum voltage */
-					value &= 0xFFFF;
-					value |=
-					    inl(instance->reg_base +
-						0xD4) & 0xFFFF0000;
-					outl(value, instance->reg_base + 0xD4);
-				} else if (i == 2) {
-					/* Delta up */
-					value <<= 16;
-					value |=
-					    inl(instance->reg_base +
-						0xD8) & 0xFFFF;
-					outl(value, instance->reg_base + 0xD8);
-				} else if (i == 3) {
-					/* Delta down */
-					value &= 0xFFFF;
-					value |=
-					    inl(instance->reg_base +
-						0xD8) & 0xFFFF0000;
-					outl(value, instance->reg_base + 0xD8);
-				} else if (i == 4) {
-					/* Start value */
-					outl(value, instance->reg_base + 0xDC);
-				} else if (i == 5) {
-					/* Invert */
-					if (value) {
-						value = inl(instance->ctrl_reg);
-						value |= 0x100;
-						outl(value, instance->ctrl_reg);
-					} else {
-						value = inl(instance->ctrl_reg);
-						value &= ~0x100;
-						outl(value, instance->ctrl_reg);
-					}
-				} else if (i == 6) {
-					/* Timer for positive ramp */
-					outl(value, instance->reg_base + 0xE0);
-				}
-
-				values++;
-			}
-		} else {	// Normal firmware
-			PDEBUG("Write for wraparound mode.\n");
-
-			if (inl(instance->status_reg) &
-			    ME4600_AO_STATUS_BIT_FSM) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR
-				    ("There is already a conversion running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			tmp |= ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-			tmp &= ~ME4600_AO_CTRL_BIT_ENABLE_FIFO;
-			outl(tmp, instance->ctrl_reg);
-			tmp |= ME4600_AO_CTRL_BIT_ENABLE_FIFO;
-
-			if ((*count > ME4600_AO_FIFO_COUNT) ||
-			    ((instance->
-			      flags & ME4600_AO_FLAGS_SW_WRAP_MODE_MASK) ==
-			     ME4600_AO_FLAGS_SW_WRAP_MODE_FIN)) {
-				tmp &=
-				    ~(ME4600_AO_CTRL_BIT_MODE_0 |
-				      ME4600_AO_CTRL_BIT_MODE_1);
-				tmp |= ME4600_AO_CTRL_BIT_MODE_1;
-			}
-
-			outl(tmp, instance->ctrl_reg);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			if ((*count <= ME4600_AO_FIFO_COUNT) &&
-			    ((instance->
-			      flags & ME4600_AO_FLAGS_SW_WRAP_MODE_MASK) ==
-			     ME4600_AO_FLAGS_SW_WRAP_MODE_INF)) {
-				for (i = 0; i < *count; i++) {
-					if (get_user(value, values + i)) {
-						PERROR
-						    ("Cannot copy value from user space.\n");
-						err = ME_ERRNO_INTERNAL;
-						goto ERROR;
-					}
-
-					if (instance->ao_idx & 0x1)
-						value <<= 16;
-
-					outl(value, instance->fifo_reg);
-				}
-			} else if ((*count <= ME4600_AO_CIRC_BUF_COUNT) &&
-				   ((instance->
-				     flags & ME4600_AO_FLAGS_SW_WRAP_MODE_MASK)
-				    == ME4600_AO_FLAGS_SW_WRAP_MODE_INF)) {
-				for (i = 0; i < *count; i++) {
-					if (get_user(value, values + i)) {
-						PERROR
-						    ("Cannot copy value from user space.\n");
-						err = ME_ERRNO_INTERNAL;
-						goto ERROR;
-					}
-
-					instance->circ_buf.buf[i] = value;	/* Used to hold the values. */
-				}
-
-				instance->circ_buf.tail = 0;	/* Used as the current read position. */
-				instance->circ_buf.head = *count;	/* Used as the buffer size. */
-
-				/* Preload the FIFO. */
-
-				for (i = 0; i < ME4600_AO_FIFO_COUNT;
-				     i++, instance->circ_buf.tail++) {
-					if (instance->circ_buf.tail >=
-					    instance->circ_buf.head)
-						instance->circ_buf.tail = 0;
-
-					if (instance->ao_idx & 0x1)
-						outl(instance->circ_buf.
-						     buf[instance->circ_buf.
-							 tail] << 16,
-						     instance->fifo_reg);
-					else
-						outl(instance->circ_buf.
-						     buf[instance->circ_buf.
-							 tail],
-						     instance->fifo_reg);
-				}
-			} else if ((*count <= ME4600_AO_CIRC_BUF_COUNT) &&
-				   ((instance->
-				     flags & ME4600_AO_FLAGS_SW_WRAP_MODE_MASK)
-				    == ME4600_AO_FLAGS_SW_WRAP_MODE_FIN)) {
-				unsigned int preload_count;
-
-				for (i = 0; i < *count; i++) {
-					if (get_user(value, values + i)) {
-						PERROR
-						    ("Cannot copy value from user space.\n");
-						err = ME_ERRNO_INTERNAL;
-						goto ERROR;
-					}
-
-					instance->circ_buf.buf[i] = value;	/* Used to hold the values. */
-				}
-
-				instance->circ_buf.tail = 0;	/* Used as the current read position. */
-				instance->circ_buf.head = *count;	/* Used as the buffer size. */
-
-				/* Try to preload the whole FIFO. */
-				preload_count = ME4600_AO_FIFO_COUNT;
-
-				if (preload_count > instance->wrap_count)
-					preload_count = instance->wrap_count;
-
-				/* Preload the FIFO. */
-				for (i = 0; i < preload_count;
-				     i++, instance->circ_buf.tail++) {
-					if (instance->circ_buf.tail >=
-					    instance->circ_buf.head)
-						instance->circ_buf.tail = 0;
-
-					if (instance->ao_idx & 0x1)
-						outl(instance->circ_buf.
-						     buf[instance->circ_buf.
-							 tail] << 16,
-						     instance->fifo_reg);
-					else
-						outl(instance->circ_buf.
-						     buf[instance->circ_buf.
-							 tail],
-						     instance->fifo_reg);
-				}
-
-				instance->wrap_remaining =
-				    instance->wrap_count - preload_count;
-			} else {
-				PERROR("To many values written.\n");
-				err = ME_ERRNO_INVALID_VALUE_COUNT;
-				goto ERROR;
-			}
-		}
-
-		break;
-
-	case 2:		// Continuous mode
-		/* Check if in SW wrapround mode */
-		if (instance->flags & ME4600_AO_FLAGS_SW_WRAP_MODE_MASK) {
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-			PERROR("Subdevice is configured SW wrapround mode.\n");
-			err = ME_ERRNO_PREVIOUS_CONFIG;
-			goto ERROR;
-		}
-
-		switch (write_mode) {
-
-		case ME_WRITE_MODE_BLOCKING:
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			PDEBUG("Write for blocking continuous mode.\n");
-
-			while (cnt > 0) {
-				wait_event_interruptible(instance->wait_queue,
-							 (c =
-							  me_circ_buf_space_to_end
-							  (&instance->
-							   circ_buf)));
-
-				if (instance->
-				    flags & ME4600_AO_FLAGS_BROKEN_PIPE) {
-					PERROR
-					    ("Broken pipe in blocking write.\n");
-					err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-					goto ERROR;
-				} else if (signal_pending(current)) {
-					PERROR
-					    ("Wait for free buffer interrupted from signal.\n");
-					err = ME_ERRNO_SIGNAL;
-					goto ERROR;
-				}
-
-				PDEBUG("Space to end = %d.\n", c);
-
-				/* Only able to write size of free buffer or size of count */
-
-				if (cnt < c)
-					c = cnt;
-				k = sizeof(int) * c;
-				k -= copy_from_user(instance->circ_buf.buf +
-						    instance->circ_buf.head,
-						    values, k);
-				c = k / sizeof(int);
-
-				PDEBUG("Copy %d values from user space.\n", c);
-
-				if (!c) {
-					PERROR
-					    ("Cannot copy values from user space.\n");
-					err = ME_ERRNO_INTERNAL;
-					goto ERROR;
-				}
-
-				instance->circ_buf.head =
-				    (instance->circ_buf.head +
-				     c) & (instance->circ_buf.mask);
-
-				values += c;
-				cnt -= c;
-				ret += c;
-
-				/* Values are now available so enable interrupts */
-				spin_lock_irqsave(&instance->subdevice_lock,
-						  cpu_flags);
-
-				if (me_circ_buf_space(&instance->circ_buf)) {
-					tmp = inl(instance->ctrl_reg);
-					tmp |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-					outl(tmp, instance->ctrl_reg);
-				}
-
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-			}
-
-			*count = ret;
-
-			break;
-
-		case ME_WRITE_MODE_NONBLOCKING:
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			PDEBUG("Write for non blocking continuous mode.\n");
-
-			while (cnt > 0) {
-				if (instance->
-				    flags & ME4600_AO_FLAGS_BROKEN_PIPE) {
-					PERROR
-					    ("ME4600:Broken pipe in nonblocking write.\n");
-					err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-					goto ERROR;
-				}
-
-				c = me_circ_buf_space_to_end(&instance->
-							     circ_buf);
-
-				if (!c) {
-					PDEBUG
-					    ("Returning from nonblocking write.\n");
-					break;
-				}
-
-				PDEBUG("Space to end = %d.\n", c);
-
-				/* Only able to write size of free buffer or size of count */
-
-				if (cnt < c)
-					c = cnt;
-				k = sizeof(int) * c;
-				k -= copy_from_user(instance->circ_buf.buf +
-						    instance->circ_buf.head,
-						    values, k);
-				c = k / sizeof(int);
-
-				PDEBUG("Copy %d values from user space.\n", c);
-
-				if (!c) {
-					PERROR
-					    ("Cannot copy values from user space.\n");
-					err = ME_ERRNO_INTERNAL;
-					goto ERROR;
-				}
-
-				instance->circ_buf.head =
-				    (instance->circ_buf.head +
-				     c) & (instance->circ_buf.mask);
-
-				values += c;
-				cnt -= c;
-				ret += c;
-
-				/* Values are now available so enable interrupts */
-				spin_lock_irqsave(&instance->subdevice_lock,
-						  cpu_flags);
-
-				if (me_circ_buf_space(&instance->circ_buf)) {
-					tmp = inl(instance->ctrl_reg);
-					tmp |= ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-					outl(tmp, instance->ctrl_reg);
-				}
-
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-			}
-
-			*count = ret;
-
-			break;
-
-		case ME_WRITE_MODE_PRELOAD:
-			PDEBUG("Write for preload continuous mode.\n");
-
-			if ((inl(instance->status_reg) &
-			     ME4600_AO_STATUS_BIT_FSM)) {
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				PERROR
-				    ("Can't Preload DAC FIFO while conversion is running.\n");
-				err = ME_ERRNO_SUBDEVICE_BUSY;
-				goto ERROR;
-			}
-
-			tmp = inl(instance->ctrl_reg);
-
-			tmp |=
-			    ME4600_AO_CTRL_BIT_STOP |
-			    ME4600_AO_CTRL_BIT_IMMEDIATE_STOP;
-			outl(tmp, instance->ctrl_reg);
-			tmp &=
-			    ~(ME4600_AO_CTRL_BIT_ENABLE_FIFO |
-			      ME4600_AO_CTRL_BIT_ENABLE_IRQ);
-			outl(tmp, instance->ctrl_reg);
-			tmp |= ME4600_AO_CTRL_BIT_ENABLE_FIFO;
-			outl(tmp, instance->ctrl_reg);
-
-			instance->circ_buf.head = 0;
-			instance->circ_buf.tail = 0;
-			instance->flags &= ~ME4600_AO_FLAGS_BROKEN_PIPE;
-
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			c = ME4600_AO_FIFO_COUNT;
-
-			if (cnt < c)
-				c = cnt;
-
-			for (i = 0; i < c; i++) {
-				if (get_user(value, values)) {
-					PERROR
-					    ("Can't copy value from user space.\n");
-					err = ME_ERRNO_INTERNAL;
-					goto ERROR;
-				}
-
-				if (instance->ao_idx & 0x1)
-					value <<= 16;
-
-				outl(value, instance->fifo_reg);
-
-				values++;
-			}
-
-			cnt -= c;
-
-			ret += c;
-
-			PDEBUG("Wrote %d values to fifo.\n", c);
-
-			while (1) {
-				c = me_circ_buf_space_to_end(&instance->
-							     circ_buf);
-
-				if (c == 0)
-					break;
-
-				if (cnt < c)
-					c = cnt;
-
-				if (c <= 0)
-					break;
-
-				k = sizeof(int) * c;
-
-				k -= copy_from_user(instance->circ_buf.buf +
-						    instance->circ_buf.head,
-						    values, k);
-
-				c = k / sizeof(int);
-
-				PDEBUG("Wrote %d values to circular buffer.\n",
-				       c);
-
-				if (!c) {
-					PERROR
-					    ("Can't copy values from user space.\n");
-					err = ME_ERRNO_INTERNAL;
-					goto ERROR;
-				}
-
-				instance->circ_buf.head =
-				    (instance->circ_buf.head +
-				     c) & (instance->circ_buf.mask);
-
-				values += c;
-				cnt -= c;
-				ret += c;
-			}
-
-			*count = ret;
-
-			break;
-
-		default:
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			PERROR("Invalid write mode specified.\n");
-
-			err = ME_ERRNO_INVALID_WRITE_MODE;
-
-			goto ERROR;
-		}
-
-		break;
-
-	default:		// Single mode of invalid
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-		PERROR("Subdevice is configured in single mode.\n");
-		err = ME_ERRNO_PREVIOUS_CONFIG;
-		goto ERROR;
-	}
-
-ERROR:
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static irqreturn_t me4600_ao_isr(int irq, void *dev_id)
-{
-	unsigned long tmp;
-	int value;
-	me4600_ao_subdevice_t *instance = dev_id;
-	int i;
-	int c = 0;
-	int c1 = 0;
-
-	if (irq != instance->irq) {
-		PDEBUG("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	if (!((0x1 << (instance->ao_idx + 3)) & inl(instance->irq_status_reg))) {
-		return IRQ_NONE;
-	}
-
-	PDEBUG("executed.\n");
-
-	tmp = inl(instance->status_reg);
-
-	if (!(tmp & ME4600_AO_STATUS_BIT_EF) &&
-	    (tmp & ME4600_AO_STATUS_BIT_HF) &&
-	    (tmp & ME4600_AO_STATUS_BIT_HF)) {
-		c = ME4600_AO_FIFO_COUNT;
-		PDEBUG("Fifo empty.\n");
-	} else if ((tmp & ME4600_AO_STATUS_BIT_EF) &&
-		   (tmp & ME4600_AO_STATUS_BIT_HF) &&
-		   (tmp & ME4600_AO_STATUS_BIT_HF)) {
-		c = ME4600_AO_FIFO_COUNT / 2;
-		PDEBUG("Fifo under half full.\n");
-	} else {
-		c = 0;
-		PDEBUG("Fifo full.\n");
-	}
-
-	PDEBUG("Try to write 0x%04X values.\n", c);
-
-	if ((instance->flags & ME4600_AO_FLAGS_SW_WRAP_MODE_MASK) ==
-	    ME4600_AO_FLAGS_SW_WRAP_MODE_INF) {
-		while (c) {
-			c1 = c;
-
-			if (c1 > (instance->circ_buf.head - instance->circ_buf.tail))	/* Only up to the end of the buffer */
-				c1 = (instance->circ_buf.head -
-				      instance->circ_buf.tail);
-
-			/* Write the values to the FIFO */
-			for (i = 0; i < c1; i++, instance->circ_buf.tail++, c--) {
-				if (instance->ao_idx & 0x1)
-					outl(instance->circ_buf.
-					     buf[instance->circ_buf.tail] << 16,
-					     instance->fifo_reg);
-				else
-					outl(instance->circ_buf.
-					     buf[instance->circ_buf.tail],
-					     instance->fifo_reg);
-			}
-
-			if (instance->circ_buf.tail >= instance->circ_buf.head)	/* Start from beginning */
-				instance->circ_buf.tail = 0;
-		}
-
-		spin_lock(&instance->subdevice_lock);
-
-		tmp = inl(instance->ctrl_reg);
-		tmp |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-		outl(tmp, instance->ctrl_reg);
-		tmp &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-		outl(tmp, instance->ctrl_reg);
-
-		if (!(inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM)) {
-			PERROR("Broken pipe.\n");
-			instance->flags |= ME4600_AO_FLAGS_BROKEN_PIPE;
-			tmp &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(tmp, instance->ctrl_reg);
-		}
-
-		spin_unlock(&instance->subdevice_lock);
-	} else if ((instance->flags & ME4600_AO_FLAGS_SW_WRAP_MODE_MASK) ==
-		   ME4600_AO_FLAGS_SW_WRAP_MODE_FIN) {
-		while (c && instance->wrap_remaining) {
-			c1 = c;
-
-			if (c1 > (instance->circ_buf.head - instance->circ_buf.tail))	/* Only up to the end of the buffer */
-				c1 = (instance->circ_buf.head -
-				      instance->circ_buf.tail);
-
-			if (c1 > instance->wrap_remaining)	/* Only up to count of user defined number of values */
-				c1 = instance->wrap_remaining;
-
-			/* Write the values to the FIFO */
-			for (i = 0; i < c1;
-			     i++, instance->circ_buf.tail++, c--,
-			     instance->wrap_remaining--) {
-				if (instance->ao_idx & 0x1)
-					outl(instance->circ_buf.
-					     buf[instance->circ_buf.tail] << 16,
-					     instance->fifo_reg);
-				else
-					outl(instance->circ_buf.
-					     buf[instance->circ_buf.tail],
-					     instance->fifo_reg);
-			}
-
-			if (instance->circ_buf.tail >= instance->circ_buf.head)	/* Start from beginning */
-				instance->circ_buf.tail = 0;
-		}
-
-		spin_lock(&instance->subdevice_lock);
-
-		tmp = inl(instance->ctrl_reg);
-
-		if (!instance->wrap_remaining) {
-			PDEBUG("Finite SW wraparound done.\n");
-			tmp &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-		}
-
-		tmp |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-
-		outl(tmp, instance->ctrl_reg);
-		tmp &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-		outl(tmp, instance->ctrl_reg);
-
-		if (!(inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM)) {
-			PERROR("Broken pipe.\n");
-			instance->flags |= ME4600_AO_FLAGS_BROKEN_PIPE;
-			tmp &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(tmp, instance->ctrl_reg);
-		}
-
-		spin_unlock(&instance->subdevice_lock);
-
-	} else {		/* Regular continuous mode */
-
-		while (1) {
-			c1 = me_circ_buf_values_to_end(&instance->circ_buf);
-			PDEBUG("Values to end = %d.\n", c1);
-
-			if (c1 > c)
-				c1 = c;
-
-			if (c1 <= 0) {
-				PDEBUG("Work done or buffer empty.\n");
-				break;
-			}
-
-			if (instance->ao_idx & 0x1) {
-				for (i = 0; i < c1; i++) {
-					value =
-					    *(instance->circ_buf.buf +
-					      instance->circ_buf.tail +
-					      i) << 16;
-					outl(value, instance->fifo_reg);
-				}
-			} else
-				outsl(instance->fifo_reg,
-				      instance->circ_buf.buf +
-				      instance->circ_buf.tail, c1);
-
-			instance->circ_buf.tail =
-			    (instance->circ_buf.tail +
-			     c1) & (instance->circ_buf.mask);
-
-			PDEBUG("%d values wrote to port 0x%04X.\n", c1,
-			       instance->fifo_reg);
-
-			c -= c1;
-		}
-
-		spin_lock(&instance->subdevice_lock);
-
-		tmp = inl(instance->ctrl_reg);
-
-		if (!me_circ_buf_values(&instance->circ_buf)) {
-			PDEBUG
-			    ("Disable Interrupt because no values left in buffer.\n");
-			tmp &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-		}
-
-		tmp |= ME4600_AO_CTRL_BIT_RESET_IRQ;
-
-		outl(tmp, instance->ctrl_reg);
-		tmp &= ~ME4600_AO_CTRL_BIT_RESET_IRQ;
-		outl(tmp, instance->ctrl_reg);
-
-		if (!(inl(instance->status_reg) & ME4600_AO_STATUS_BIT_FSM)) {
-			PDEBUG("Broken pipe in me4600_ao_isr.\n");
-			instance->flags |= ME4600_AO_FLAGS_BROKEN_PIPE;
-			tmp &= ~ME4600_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(tmp, instance->ctrl_reg);
-		}
-
-		spin_unlock(&instance->subdevice_lock);
-
-		wake_up_interruptible(&instance->wait_queue);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void me4600_ao_destructor(struct me_subdevice *subdevice)
-{
-	me4600_ao_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	free_irq(instance->irq, instance);
-	kfree(instance->circ_buf.buf);
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-me4600_ao_subdevice_t *me4600_ao_constructor(uint32_t reg_base,
-					     spinlock_t *preload_reg_lock,
-					     uint32_t *preload_flags,
-					     int ao_idx, int fifo, int irq)
-{
-	me4600_ao_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me4600_ao_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me4600_ao_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->preload_reg_lock = preload_reg_lock;
-	subdevice->preload_flags = preload_flags;
-
-	/* Allocate and initialize circular buffer */
-	subdevice->circ_buf.mask = ME4600_AO_CIRC_BUF_COUNT - 1;
-	subdevice->circ_buf.buf = kmalloc(ME4600_AO_CIRC_BUF_SIZE, GFP_KERNEL);
-
-	if (!subdevice->circ_buf.buf) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		me_subdevice_deinit((me_subdevice_t *) subdevice);
-		kfree(subdevice);
-		return NULL;
-	}
-
-	memset(subdevice->circ_buf.buf, 0, ME4600_AO_CIRC_BUF_SIZE);
-
-	subdevice->circ_buf.head = 0;
-	subdevice->circ_buf.tail = 0;
-
-	/* Initialize wait queue */
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	/* Initialize single value to 0V */
-	subdevice->single_value = 0x8000;
-
-	/* Store analog output index */
-	subdevice->ao_idx = ao_idx;
-
-	/* Store if analog output has fifo */
-	subdevice->fifo = fifo;
-
-	/* Initialize registers */
-
-	if (ao_idx == 0) {
-		subdevice->ctrl_reg = reg_base + ME4600_AO_00_CTRL_REG;
-		subdevice->status_reg = reg_base + ME4600_AO_00_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME4600_AO_00_FIFO_REG;
-		subdevice->single_reg = reg_base + ME4600_AO_00_SINGLE_REG;
-		subdevice->timer_reg = reg_base + ME4600_AO_00_TIMER_REG;
-		subdevice->reg_base = reg_base;
-
-		if (inl(subdevice->reg_base + ME4600_AO_BOSCH_REG) == 0x20000) {
-			PINFO("Bosch firmware in use for channel 0.\n");
-			subdevice->bosch_fw = 1;
-		} else {
-			subdevice->bosch_fw = 0;
-		}
-	} else if (ao_idx == 1) {
-		subdevice->ctrl_reg = reg_base + ME4600_AO_01_CTRL_REG;
-		subdevice->status_reg = reg_base + ME4600_AO_01_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME4600_AO_01_FIFO_REG;
-		subdevice->single_reg = reg_base + ME4600_AO_01_SINGLE_REG;
-		subdevice->timer_reg = reg_base + ME4600_AO_01_TIMER_REG;
-		subdevice->reg_base = reg_base;
-		subdevice->bosch_fw = 0;
-	} else if (ao_idx == 2) {
-		subdevice->ctrl_reg = reg_base + ME4600_AO_02_CTRL_REG;
-		subdevice->status_reg = reg_base + ME4600_AO_02_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME4600_AO_02_FIFO_REG;
-		subdevice->single_reg = reg_base + ME4600_AO_02_SINGLE_REG;
-		subdevice->timer_reg = reg_base + ME4600_AO_02_TIMER_REG;
-		subdevice->reg_base = reg_base;
-		subdevice->bosch_fw = 0;
-	} else {
-		subdevice->ctrl_reg = reg_base + ME4600_AO_03_CTRL_REG;
-		subdevice->status_reg = reg_base + ME4600_AO_03_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME4600_AO_03_FIFO_REG;
-		subdevice->single_reg = reg_base + ME4600_AO_03_SINGLE_REG;
-		subdevice->timer_reg = reg_base + ME4600_AO_03_TIMER_REG;
-		subdevice->reg_base = reg_base;
-		subdevice->bosch_fw = 0;
-	}
-
-	subdevice->irq_status_reg = reg_base + ME4600_IRQ_STATUS_REG;
-	subdevice->preload_reg = reg_base + ME4600_AO_LOADSETREG_XX;
-
-	/* Register interrupt service routine */
-	subdevice->irq = irq;
-
-	if (request_irq
-	    (subdevice->irq, me4600_ao_isr, IRQF_DISABLED | IRQF_SHARED,
-	     ME4600_NAME, subdevice)) {
-		PERROR("Cannot get interrupt line.\n");
-		me_subdevice_deinit((me_subdevice_t *) subdevice);
-		kfree(subdevice->circ_buf.buf);
-		kfree(subdevice);
-		return NULL;
-	}
-
-	/* Override base class methods. */
-	subdevice->base.me_subdevice_destructor = me4600_ao_destructor;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me4600_ao_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me4600_ao_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me4600_ao_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me4600_ao_io_single_write;
-	subdevice->base.me_subdevice_io_stream_config =
-	    me4600_ao_io_stream_config;
-	subdevice->base.me_subdevice_io_stream_new_values =
-	    me4600_ao_io_stream_new_values;
-	subdevice->base.me_subdevice_io_stream_write =
-	    me4600_ao_io_stream_write;
-	subdevice->base.me_subdevice_io_stream_start =
-	    me4600_ao_io_stream_start;
-	subdevice->base.me_subdevice_io_stream_status =
-	    me4600_ao_io_stream_status;
-	subdevice->base.me_subdevice_io_stream_stop = me4600_ao_io_stream_stop;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me4600_ao_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me4600_ao_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me4600_ao_query_subdevice_caps;
-	subdevice->base.me_subdevice_query_subdevice_caps_args =
-	    me4600_ao_query_subdevice_caps_args;
-	subdevice->base.me_subdevice_query_range_by_min_max =
-	    me4600_ao_query_range_by_min_max;
-	subdevice->base.me_subdevice_query_number_ranges =
-	    me4600_ao_query_number_ranges;
-	subdevice->base.me_subdevice_query_range_info =
-	    me4600_ao_query_range_info;
-	subdevice->base.me_subdevice_query_timer = me4600_ao_query_timer;
-
-	return subdevice;
-}
-
-#endif // BOSCH
-
-/* Common functions
-*/
-
-static int me4600_ao_query_range_by_min_max(me_subdevice_t *subdevice,
-					    int unit,
-					    int *min,
-					    int *max, int *maxdata, int *range)
-{
-	me4600_ao_subdevice_t *instance;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if ((*max - *min) < 0) {
-		PERROR("Invalid minimum and maximum values specified.\n");
-		return ME_ERRNO_INVALID_MIN_MAX;
-	}
-
-	if ((unit == ME_UNIT_VOLT) || (unit == ME_UNIT_ANY)) {
-		if ((*max <= (ME4600_AO_MAX_RANGE + 1000))
-		    && (*min >= ME4600_AO_MIN_RANGE)) {
-			*min = ME4600_AO_MIN_RANGE;
-			*max = ME4600_AO_MAX_RANGE;
-			*maxdata = ME4600_AO_MAX_DATA;
-			*range = 0;
-		} else {
-			PERROR("No matching range available.\n");
-			return ME_ERRNO_NO_RANGE;
-		}
-	} else {
-		PERROR("Invalid physical unit specified.\n");
-		return ME_ERRNO_INVALID_UNIT;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ao_query_number_ranges(me_subdevice_t *subdevice,
-					 int unit, int *count)
-{
-	me4600_ao_subdevice_t *instance;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if ((unit == ME_UNIT_VOLT) || (unit == ME_UNIT_ANY)) {
-		*count = 1;
-	} else {
-		*count = 0;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ao_query_range_info(me_subdevice_t *subdevice,
-				      int range,
-				      int *unit,
-				      int *min, int *max, int *maxdata)
-{
-	me4600_ao_subdevice_t *instance;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (range == 0) {
-		*unit = ME_UNIT_VOLT;
-		*min = ME4600_AO_MIN_RANGE;
-		*max = ME4600_AO_MAX_RANGE;
-		*maxdata = ME4600_AO_MAX_DATA;
-	} else {
-		PERROR("Invalid range number specified.\n");
-		return ME_ERRNO_INVALID_RANGE;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ao_query_timer(me_subdevice_t *subdevice,
-				 int timer,
-				 int *base_frequency,
-				 long long *min_ticks, long long *max_ticks)
-{
-	me4600_ao_subdevice_t *instance;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if ((timer != ME_TIMER_ACQ_START) && (timer != ME_TIMER_CONV_START)) {
-		PERROR("Invalid timer specified.\n");
-		return ME_ERRNO_INVALID_TIMER;
-	}
-
-	if (instance->fifo) {	//Streaming device.
-		*base_frequency = ME4600_AO_BASE_FREQUENCY;
-		if (timer == ME_TIMER_ACQ_START) {
-			*min_ticks = ME4600_AO_MIN_ACQ_TICKS;
-			*max_ticks = ME4600_AO_MAX_ACQ_TICKS;
-		} else if (timer == ME_TIMER_CONV_START) {
-			*min_ticks = ME4600_AO_MIN_CHAN_TICKS;
-			*max_ticks = ME4600_AO_MAX_CHAN_TICKS;
-		}
-	} else {		//Not streaming device!
-		*base_frequency = 0;
-		*min_ticks = 0;
-		*max_ticks = 0;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ao_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	me4600_ao_subdevice_t *instance;
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	*number = 1;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ao_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	me4600_ao_subdevice_t *instance;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	*type = ME_TYPE_AO;
-	*subtype = (instance->fifo) ? ME_SUBTYPE_STREAMING : ME_SUBTYPE_SINGLE;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ao_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	me4600_ao_subdevice_t *instance;
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	*caps =
-	    ME_CAPS_AO_TRIG_SYNCHRONOUS | ((instance->fifo) ? ME_CAPS_AO_FIFO :
-					   ME_CAPS_NONE);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ao_query_subdevice_caps_args(struct me_subdevice *subdevice,
-					       int cap, int *args, int count)
-{
-	me4600_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	instance = (me4600_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (count != 1) {
-		PERROR("Invalid capability argument count.\n");
-		return ME_ERRNO_INVALID_CAP_ARG_COUNT;
-	}
-
-	switch (cap) {
-	case ME_CAP_AI_FIFO_SIZE:
-		args[0] = (instance->fifo) ? ME4600_AO_FIFO_COUNT : 0;
-		break;
-
-	case ME_CAP_AI_BUFFER_SIZE:
-		args[0] =
-		    (instance->circ_buf.buf) ? ME4600_AO_CIRC_BUF_COUNT : 0;
-		break;
-
-	default:
-		PERROR("Invalid capability.\n");
-		err = ME_ERRNO_INVALID_CAP;
-		args[0] = 0;
-	}
-
-	return err;
-}
diff --git a/drivers/staging/meilhaus/me4600_ao.h b/drivers/staging/meilhaus/me4600_ao.h
deleted file mode 100644
index 7579435..0000000
--- a/drivers/staging/meilhaus/me4600_ao.h
+++ /dev/null
@@ -1,259 +0,0 @@
-/**
- * @file me4600_ao.h
- *
- * @brief Meilhaus ME-4000 analog output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_AO_H_
-# define _ME4600_AO_H_
-
-# include <linux/version.h>
-# include "mesubdevice.h"
-# include "mecirc_buf.h"
-# include "meioctl.h"
-
-# ifdef __KERNEL__
-
-#  ifdef BOSCH
-#   undef ME_SYNAPSE
-#   ifndef _CBUFF_32b_t
-# 	 define _CBUFF_32b_t
-#   endif //_CBUFF_32b_t
-#  endif //BOSCH
-
-#  define ME4600_AO_MAX_SUBDEVICES		4
-#  define ME4600_AO_FIFO_COUNT			4096
-
-#  define ME4600_AO_BASE_FREQUENCY		33000000LL
-
-#  define ME4600_AO_MIN_ACQ_TICKS		0LL
-#  define ME4600_AO_MAX_ACQ_TICKS		0LL
-
-#  define ME4600_AO_MIN_CHAN_TICKS		66LL
-#  define ME4600_AO_MAX_CHAN_TICKS		0xFFFFFFFFLL
-
-#  define ME4600_AO_MIN_RANGE			-10000000
-#  define ME4600_AO_MAX_RANGE			9999694
-
-#  define ME4600_AO_MAX_DATA			0xFFFF
-
-#  ifdef ME_SYNAPSE
-#   define ME4600_AO_CIRC_BUF_SIZE_ORDER 		8	// 2^n PAGES =>> Maximum value of 1MB for Synapse
-#  else
-#   define ME4600_AO_CIRC_BUF_SIZE_ORDER 		5	// 2^n PAGES =>> 128KB
-#  endif
-#  define ME4600_AO_CIRC_BUF_SIZE 		PAGE_SIZE<<ME4600_AO_CIRC_BUF_SIZE_ORDER	// Buffer size in bytes.
-
-#  ifdef _CBUFF_32b_t
-#   define ME4600_AO_CIRC_BUF_COUNT	((ME4600_AO_CIRC_BUF_SIZE) / sizeof(uint32_t))	// Size in values
-#  else
-#   define ME4600_AO_CIRC_BUF_COUNT	((ME4600_AO_CIRC_BUF_SIZE) / sizeof(uint16_t))	// Size in values
-#  endif
-
-#  define ME4600_AO_CONTINOUS					0x0
-#  define ME4600_AO_WRAP_MODE					0x1
-#  define ME4600_AO_HW_MODE						0x2
-
-#  define ME4600_AO_HW_WRAP_MODE				(ME4600_AO_WRAP_MODE | ME4600_AO_HW_MODE)
-#  define ME4600_AO_SW_WRAP_MODE				ME4600_AO_WRAP_MODE
-
-#  define ME4600_AO_INF_STOP_MODE				0x0
-#  define ME4600_AO_ACQ_STOP_MODE				0x1
-#  define ME4600_AO_SCAN_STOP_MODE				0x2
-
-#  ifdef BOSCH			//SPECIAL BUILD FOR BOSCH
-
-/* Bits for flags attribute. */
-#   define ME4600_AO_FLAGS_BROKEN_PIPE			0x1
-#   define ME4600_AO_FLAGS_SW_WRAP_MODE_0		0x2
-#   define ME4600_AO_FLAGS_SW_WRAP_MODE_1		0x4
-#   define ME4600_AO_FLAGS_SW_WRAP_MODE_MASK	(ME4600_AO_FLAGS_SW_WRAP_MODE_0 | ME4600_AO_FLAGS_SW_WRAP_MODE_1)
-
-#   define ME4600_AO_FLAGS_SW_WRAP_MODE_NONE	0x0
-#   define ME4600_AO_FLAGS_SW_WRAP_MODE_INF		0x2
-#   define ME4600_AO_FLAGS_SW_WRAP_MODE_FIN		0x4
-
-	/**
-	* @brief The ME-4000 analog output subdevice class.
-	*/
-typedef struct me4600_ao_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;				/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;			/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *preload_reg_lock;		/**< Spin lock to protect #preload_reg from concurrent access. */
-	uint32_t *preload_flags;
-
-	unsigned int irq;					/**< The interrupt request number assigned by the PCI BIOS. */
-	me_circ_buf_t circ_buf;				/**< Circular buffer holding measurment data. */
-	wait_queue_head_t wait_queue;		/**< Wait queue to put on tasks waiting for data to arrive. */
-
-	int single_value;					/**< Mirror of the value written in single mode. */
-
-	int volatile flags;					/**< Flags used for storing SW wraparound setup and error signalling from ISR. */
-	unsigned int wrap_count;			/**< The user defined wraparound cycle count. */
-	unsigned int wrap_remaining;		/**< The wraparound cycle down counter used by a running conversion. */
-	unsigned int ao_idx;				/**< The index of this analog output on this device. */
-	int fifo;							/**< If set this device has a FIFO. */
-
-	int bosch_fw;						/**< If set the bosch firmware is in PROM. */
-
-	/* Registers */
-	uint32_t ctrl_reg;
-	uint32_t status_reg;
-	uint32_t fifo_reg;
-	uint32_t single_reg;
-	uint32_t timer_reg;
-	uint32_t irq_status_reg;
-	uint32_t preload_reg;
-	uint32_t reg_base;
-} me4600_ao_subdevice_t;
-
-	/**
-	* @brief The constructor to generate a ME-4000 analog output subdevice instance for BOSCH project.
-	*
-	* @param reg_base The register base address of the device as returned by the PCI BIOS.
-	* @param ctrl_reg_lock Pointer to spin lock protecting the control register from concurrent access.
-	* @param preload_flags Pointer to spin lock protecting the hold&trigger register from concurrent access.
-	* @param ao_idx Subdevice number.
-	* @param fifo Flag set if subdevice has hardware FIFO.
-	* @param irq IRQ number.
-	*
-	* @return Pointer to new instance on success.\n
-	* NULL on error.
-	*/
-me4600_ao_subdevice_t *me4600_ao_constructor(uint32_t reg_base,
-					     spinlock_t * preload_reg_lock,
-					     uint32_t * preload_flags,
-					     int ao_idx, int fifo, int irq);
-
-#  else	//~BOSCH
-
-//ME4600_AO_FLAGS_BROKEN_PIPE is OBSOLETE => Now problems are reported in status.
-
-typedef enum ME4600_AO_STATUS {
-	ao_status_none = 0,
-	ao_status_single_configured,
-	ao_status_single_run_wait,
-	ao_status_single_run,
-	ao_status_single_end_wait,
-	ao_status_single_end,
-	ao_status_stream_configured,
-	ao_status_stream_run_wait,
-	ao_status_stream_run,
-	ao_status_stream_end_wait,
-	ao_status_stream_end,
-	ao_status_stream_fifo_error,
-	ao_status_stream_buffer_error,
-	ao_status_stream_error,
-	ao_status_last
-} ME4600_AO_STATUS;
-
-typedef struct me4600_ao_timeout {
-	unsigned long start_time;
-	unsigned long delay;
-} me4600_ao_timeout_t;
-
-	/**
-	* @brief The ME-4600 analog output subdevice class.
-	*/
-typedef struct me4600_ao_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;						/**< The subdevice base class. */
-	unsigned int ao_idx;						/**< The index of this analog output on this device. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;					/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *preload_reg_lock;				/**< Spin lock to protect preload_reg from concurrent access. */
-
-	uint32_t *preload_flags;
-
-	/* Hardware feautres */
-	unsigned int irq;							/**< The interrupt request number assigned by the PCI BIOS. */
-	int fifo;									/**< If set this device has a FIFO. */
-	int bitpattern;								/**< If set this device use bitpattern. */
-
-	int single_value;							/**< Mirror of the output value in single mode. */
-	int single_value_in_fifo;					/**< Mirror of the value written in single mode. */
-	uint32_t ctrl_trg;							/**< Mirror of the trigger settings. */
-
-	volatile int mode;							/**< Flags used for storing SW wraparound setup*/
-	int stop_mode;								/**< The user defined stop condition flag. */
-	unsigned int start_mode;
-	unsigned int stop_count;					/**< The user defined dates presentation end count. */
-	unsigned int stop_data_count;				/**< The stop presentation count. */
-	unsigned int data_count;					/**< The real presentation count. */
-	unsigned int preloaded_count;				/**< The next data addres in buffer. <= for wraparound mode. */
-	int hardware_stop_delay;					/**< The time that stop can take. This is only to not show hardware bug to user. */
-
-	volatile enum ME4600_AO_STATUS status;		/**< The current stream status flag. */
-	me4600_ao_timeout_t timeout;				/**< The timeout for start in blocking and non-blocking mode. */
-
-										/* Registers *//**< All registers are 32 bits long. */
-	unsigned long ctrl_reg;
-	unsigned long status_reg;
-	unsigned long fifo_reg;
-	unsigned long single_reg;
-	unsigned long timer_reg;
-	unsigned long irq_status_reg;
-	unsigned long preload_reg;
-	unsigned long reg_base;
-
-	/* Software buffer */
-	me_circ_buf_t circ_buf;						/**< Circular buffer holding measurment data. 32 bit long */
-	wait_queue_head_t wait_queue;				/**< Wait queue to put on tasks waiting for data to arrive. */
-
-	struct workqueue_struct *me4600_workqueue;
-	struct delayed_work ao_control_task;
-
-	volatile int ao_control_task_flag;			/**< Flag controling reexecuting of control task */
-
-} me4600_ao_subdevice_t;
-
-	/**
-	* @brief The constructor to generate a ME-4600 analog output subdevice instance.
-	*
-	* @param reg_base The register base address of the device as returned by the PCI BIOS.
-	* @param ctrl_reg_lock Pointer to spin lock protecting the control register from concurrent access.
-	* @param preload_flags Pointer to spin lock protecting the hold&trigger register from concurrent access.
-	* @param ao_idx Subdevice number.
-	* @param fifo Flag set if subdevice has hardware FIFO.
-	* @param irq IRQ number.
-	* @param me4600_wq Queue for asynchronous task (1 queue for all subdevice on 1 board).
-	*
-	* @return Pointer to new instance on success.\n
-	* NULL on error.
-	*/
-me4600_ao_subdevice_t *me4600_ao_constructor(uint32_t reg_base,
-					     spinlock_t * preload_reg_lock,
-					     uint32_t * preload_flags,
-					     int ao_idx,
-					     int fifo,
-					     int irq,
-					     struct workqueue_struct
-					     *me4600_wq);
-
-#  endif //BOSCH
-# endif	//__KERNEL__
-#endif // ~_ME4600_AO_H_
diff --git a/drivers/staging/meilhaus/me4600_ao_reg.h b/drivers/staging/meilhaus/me4600_ao_reg.h
deleted file mode 100644
index f83d82e..0000000
--- a/drivers/staging/meilhaus/me4600_ao_reg.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/**
- * @file me4600_ao_reg.h
- *
- * @brief ME-4000 analog output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_AO_REG_H_
-#define _ME4600_AO_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME4600_AO_00_CTRL_REG					0x00	// R/W
-#define ME4600_AO_00_STATUS_REG					0x04	// R/_
-#define ME4600_AO_00_FIFO_REG					0x08	// _/W
-#define ME4600_AO_00_SINGLE_REG					0x0C	// R/W
-#define ME4600_AO_00_TIMER_REG					0x10	// _/W
-
-#define ME4600_AO_01_CTRL_REG					0x18	// R/W
-#define ME4600_AO_01_STATUS_REG					0x1C	// R/_
-#define ME4600_AO_01_FIFO_REG					0x20	// _/W
-#define ME4600_AO_01_SINGLE_REG					0x24	// R/W
-#define ME4600_AO_01_TIMER_REG					0x28	// _/W
-
-#define ME4600_AO_02_CTRL_REG					0x30	// R/W
-#define ME4600_AO_02_STATUS_REG					0x34	// R/_
-#define ME4600_AO_02_FIFO_REG					0x38	// _/W
-#define ME4600_AO_02_SINGLE_REG					0x3C	// R/W
-#define ME4600_AO_02_TIMER_REG					0x40	// _/W
-
-#define ME4600_AO_03_CTRL_REG					0x48	// R/W
-#define ME4600_AO_03_STATUS_REG					0x4C	// R/_
-#define ME4600_AO_03_FIFO_REG					0x50	// _/W
-#define ME4600_AO_03_SINGLE_REG					0x54	// R/W
-#define ME4600_AO_03_TIMER_REG					0x58	// _/W
-
-#define ME4600_AO_DEMUX_ADJUST_REG				0xBC	// -/W
-#define ME4600_AO_DEMUX_ADJUST_VALUE			0x4C
-
-#ifdef BOSCH
-# define ME4600_AO_BOSCH_REG					0xC4
-
-# define ME4600_AO_LOADSETREG_XX				0xB4	// R/W
-
-# define ME4600_AO_CTRL_BIT_MODE_0				0x001
-# define ME4600_AO_CTRL_BIT_MODE_1				0x002
-# define ME4600_AO_CTRL_MASK_MODE				0x003
-
-#else //~BOSCH
-
-#define ME4600_AO_SYNC_REG						0xB4	// R/W    ///ME4600_AO_SYNC_REG <==> ME4600_AO_PRELOAD_REG <==> ME4600_AO_LOADSETREG_XX
-
-# define ME4600_AO_MODE_SINGLE					0x00000000
-# define ME4600_AO_MODE_WRAPAROUND				0x00000001
-# define ME4600_AO_MODE_CONTINUOUS				0x00000002
-# define ME4600_AO_CTRL_MODE_MASK				(ME4600_AO_MODE_WRAPAROUND | ME4600_AO_MODE_CONTINUOUS)
-#endif //BOSCH
-
-#define ME4600_AO_CTRL_BIT_MODE_WRAPAROUND		ME4600_AO_MODE_WRAPAROUND
-#define ME4600_AO_CTRL_BIT_MODE_CONTINOUS		ME4600_AO_MODE_CONTINUOUS
-#define ME4600_AO_CTRL_BIT_STOP					0x00000004
-#define ME4600_AO_CTRL_BIT_ENABLE_FIFO			0x00000008
-#define ME4600_AO_CTRL_BIT_ENABLE_EX_TRIG		0x00000010
-#define ME4600_AO_CTRL_BIT_EX_TRIG_EDGE			0x00000020
-#define ME4600_AO_CTRL_BIT_IMMEDIATE_STOP		0x00000080
-#define ME4600_AO_CTRL_BIT_ENABLE_DO			0x00000100
-#define ME4600_AO_CTRL_BIT_ENABLE_IRQ			0x00000200
-#define ME4600_AO_CTRL_BIT_RESET_IRQ			0x00000400
-#define ME4600_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH	0x00000800
-/*
-#define ME4600_AO_SYNC_HOLD_0					0x00000001
-#define ME4600_AO_SYNC_HOLD_1					0x00000002
-#define ME4600_AO_SYNC_HOLD_2					0x00000004
-#define ME4600_AO_SYNC_HOLD_3					0x00000008
-*/
-#define ME4600_AO_SYNC_HOLD						0x00000001
-
-/*
-#define ME4600_AO_SYNC_EXT_TRIG_0				0x00010000
-#define ME4600_AO_SYNC_EXT_TRIG_1				0x00020000
-#define ME4600_AO_SYNC_EXT_TRIG_2				0x00040000
-#define ME4600_AO_SYNC_EXT_TRIG_3				0x00080000
-*/
-#define ME4600_AO_SYNC_EXT_TRIG					0x00010000
-
-#define ME4600_AO_EXT_TRIG						0x80000000
-
-#define ME4600_AO_STATUS_BIT_FSM				0x00000001
-#define ME4600_AO_STATUS_BIT_FF					0x00000002
-#define ME4600_AO_STATUS_BIT_HF					0x00000004
-#define ME4600_AO_STATUS_BIT_EF					0x00000008
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_device.c b/drivers/staging/meilhaus/me4600_device.c
deleted file mode 100644
index 457666e..0000000
--- a/drivers/staging/meilhaus/me4600_device.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/**
- * @file me4600_device.c
- *
- * @brief ME-4600 device class implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-#include "medevice.h"
-#include "me4600_device.h"
-#include "meplx_reg.h"
-
-#include "mefirmware.h"
-
-#include "mesubdevice.h"
-#include "me4600_do.h"
-#include "me4600_di.h"
-#include "me4600_dio.h"
-#include "me8254.h"
-#include "me4600_ai.h"
-#include "me4600_ao.h"
-#include "me4600_ext_irq.h"
-
-/**
- * @brief Global variable.
- * This is working queue for runing a separate atask that will be responsible for work status (start, stop, timeouts).
- */
-static struct workqueue_struct *me4600_workqueue;
-
-#ifdef BOSCH
-me_device_t *me4600_pci_constructor(struct pci_dev *pci_device, int me_bosch_fw)
-#else //~BOSCH
-me_device_t *me4600_pci_constructor(struct pci_dev *pci_device)
-#endif				//BOSCH
-{
-	me4600_device_t *me4600_device;
-	me_subdevice_t *subdevice;
-	unsigned int version_idx;
-	int err;
-	int i;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me4600_device = kmalloc(sizeof(me4600_device_t), GFP_KERNEL);
-
-	if (!me4600_device) {
-		PERROR("Cannot get memory for ME-4600 device instance.\n");
-		return NULL;
-	}
-
-	memset(me4600_device, 0, sizeof(me4600_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me4600_device, pci_device);
-
-	if (err) {
-		kfree(me4600_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-	// Download the xilinx firmware.
-	if (me4600_device->base.info.pci.device_id == PCI_DEVICE_ID_MEILHAUS_ME4610) {	//Jekyll <=> me4610
-		err =
-		    me_xilinx_download(me4600_device->base.info.pci.
-				       reg_bases[1],
-				       me4600_device->base.info.pci.
-				       reg_bases[5], &pci_device->dev,
-				       "me4610.bin");
-	} else {		// General me4600 firmware
-#ifdef BOSCH
-		err =
-		    me_xilinx_download(me4600_device->base.info.pci.
-				       reg_bases[1],
-				       me4600_device->base.info.pci.
-				       reg_bases[5], &pci_device->dev,
-				       (me_bosch_fw) ? "me4600_bosch.bin" :
-				       "me4600.bin");
-#else //~BOSCH
-		err =
-		    me_xilinx_download(me4600_device->base.info.pci.
-				       reg_bases[1],
-				       me4600_device->base.info.pci.
-				       reg_bases[5], &pci_device->dev,
-				       "me4600.bin");
-#endif
-	}
-
-	if (err) {
-		me_device_deinit((me_device_t *) me4600_device);
-		kfree(me4600_device);
-		PERROR("Cannot download firmware.\n");
-		return NULL;
-	}
-	// Get the index in the device version information table.
-	version_idx =
-	    me4600_versions_get_device_index(me4600_device->base.info.pci.
-					     device_id);
-
-	// Initialize spin locks.
-	spin_lock_init(&me4600_device->preload_reg_lock);
-
-	me4600_device->preload_flags = 0;
-
-	spin_lock_init(&me4600_device->dio_lock);
-	spin_lock_init(&me4600_device->ai_ctrl_lock);
-	spin_lock_init(&me4600_device->ctr_ctrl_reg_lock);
-	spin_lock_init(&me4600_device->ctr_clk_src_reg_lock);
-
-	// Create digital input instances.
-	for (i = 0; i < me4600_versions[version_idx].di_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me4600_di_constructor(me4600_device->
-							     base.info.pci.
-							     reg_bases[2],
-							     &me4600_device->
-							     dio_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me4600_device);
-			kfree(me4600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me4600_device->base.slist,
-					    subdevice);
-	}
-
-	// Create digital output instances.
-	for (i = 0; i < me4600_versions[version_idx].do_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me4600_do_constructor(me4600_device->
-							     base.info.pci.
-							     reg_bases[2],
-							     &me4600_device->
-							     dio_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me4600_device);
-			kfree(me4600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me4600_device->base.slist,
-					    subdevice);
-	}
-
-	// Create digital input/output instances.
-	for (i = 0; i < me4600_versions[version_idx].dio_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me4600_dio_constructor(me4600_device->
-							      base.info.pci.
-							      reg_bases[2],
-							      me4600_versions
-							      [version_idx].
-							      do_subdevices +
-							      me4600_versions
-							      [version_idx].
-							      di_subdevices + i,
-							      &me4600_device->
-							      dio_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me4600_device);
-			kfree(me4600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me4600_device->base.slist,
-					    subdevice);
-	}
-
-	// Create analog input instances.
-	for (i = 0; i < me4600_versions[version_idx].ai_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me4600_ai_constructor(me4600_device->
-							     base.info.pci.
-							     reg_bases[2],
-							     me4600_versions
-							     [version_idx].
-							     ai_channels,
-							     me4600_versions
-							     [version_idx].
-							     ai_ranges,
-							     me4600_versions
-							     [version_idx].
-							     ai_isolated,
-							     me4600_versions
-							     [version_idx].
-							     ai_sh,
-							     me4600_device->
-							     base.irq,
-							     &me4600_device->
-							     ai_ctrl_lock,
-							     me4600_workqueue);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me4600_device);
-			kfree(me4600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me4600_device->base.slist,
-					    subdevice);
-	}
-
-	// Create analog output instances.
-	for (i = 0; i < me4600_versions[version_idx].ao_subdevices; i++) {
-#ifdef BOSCH
-		subdevice =
-		    (me_subdevice_t *) me4600_ao_constructor(me4600_device->
-							     base.info.pci.
-							     reg_bases[2],
-							     &me4600_device->
-							     preload_reg_lock,
-							     &me4600_device->
-							     preload_flags, i,
-							     me4600_versions
-							     [version_idx].
-							     ao_fifo,
-							     me4600_device->
-							     base.irq);
-#else //~BOSCH
-		subdevice =
-		    (me_subdevice_t *) me4600_ao_constructor(me4600_device->
-							     base.info.pci.
-							     reg_bases[2],
-							     &me4600_device->
-							     preload_reg_lock,
-							     &me4600_device->
-							     preload_flags, i,
-							     me4600_versions
-							     [version_idx].
-							     ao_fifo,
-							     me4600_device->
-							     base.irq,
-							     me4600_workqueue);
-#endif
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me4600_device);
-			kfree(me4600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me4600_device->base.slist,
-					    subdevice);
-	}
-
-	// Create counter instances.
-	for (i = 0; i < me4600_versions[version_idx].ctr_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me8254_constructor(me4600_device->base.
-							  info.pci.device_id,
-							  me4600_device->base.
-							  info.pci.reg_bases[3],
-							  0, i,
-							  &me4600_device->
-							  ctr_ctrl_reg_lock,
-							  &me4600_device->
-							  ctr_clk_src_reg_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me4600_device);
-			kfree(me4600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me4600_device->base.slist,
-					    subdevice);
-	}
-
-	// Create external interrupt instances.
-	for (i = 0; i < me4600_versions[version_idx].ext_irq_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *)
-		    me4600_ext_irq_constructor(me4600_device->base.info.pci.
-					       reg_bases[2],
-					       me4600_device->base.irq,
-					       &me4600_device->ai_ctrl_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me4600_device);
-			kfree(me4600_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me4600_device->base.slist,
-					    subdevice);
-	}
-
-	return (me_device_t *) me4600_device;
-}
-EXPORT_SYMBOL(me4600_pci_constructor);
-
-// Init and exit of module.
-
-static int __init me4600_init(void)
-{
-	PDEBUG("executed.\n");
-
-#ifndef BOSCH
-	me4600_workqueue = create_singlethread_workqueue("me4600");
-#endif
-	return 0;
-}
-
-static void __exit me4600_exit(void)
-{
-	PDEBUG("executed.\n");
-
-#ifndef BOSCH
-	flush_workqueue(me4600_workqueue);
-	destroy_workqueue(me4600_workqueue);
-#endif
-}
-
-module_init(me4600_init);
-module_exit(me4600_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR
-    ("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx> & Krzysztof Gantzke <k.gantzke@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for ME-46xx Devices");
-MODULE_SUPPORTED_DEVICE("Meilhaus ME-46xx Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me4600_device.h b/drivers/staging/meilhaus/me4600_device.h
deleted file mode 100644
index c755c57..0000000
--- a/drivers/staging/meilhaus/me4600_device.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/**
- * @file me4600_device.h
- *
- * @brief ME-4600 device class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_DEVICE_H
-#define _ME4600_DEVICE_H
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure holding ME-4600 device capabilities.
- */
-typedef struct me4600_version {
-	uint16_t device_id;
-	unsigned int do_subdevices;
-	unsigned int di_subdevices;
-	unsigned int dio_subdevices;
-	unsigned int ctr_subdevices;
-	unsigned int ai_subdevices;
-	unsigned int ai_channels;
-	unsigned int ai_ranges;
-	unsigned int ai_isolated;
-	unsigned int ai_sh;
-	unsigned int ao_subdevices;
-	unsigned int ao_fifo;	//How many devices have FIFO
-	unsigned int ext_irq_subdevices;
-} me4600_version_t;
-
-/**
- * @brief ME-4600 device capabilities.
- */
-static me4600_version_t me4600_versions[] = {
-	{PCI_DEVICE_ID_MEILHAUS_ME4610, 0, 0, 4, 3, 1, 16, 1, 0, 0, 0, 0, 1},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME4650, 0, 0, 4, 0, 1, 16, 4, 0, 0, 0, 0, 1},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME4660, 0, 0, 4, 3, 1, 16, 4, 0, 0, 2, 0, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4660I, 1, 1, 2, 3, 1, 16, 4, 1, 0, 2, 0, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4660S, 0, 0, 4, 3, 1, 16, 4, 0, 1, 2, 0, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4660IS, 1, 1, 2, 3, 1, 16, 4, 1, 1, 2, 0, 1},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME4670, 0, 0, 4, 3, 1, 32, 4, 0, 0, 4, 0, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4670I, 1, 1, 2, 3, 1, 32, 4, 1, 0, 4, 0, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4670S, 0, 0, 4, 3, 1, 32, 4, 0, 1, 4, 0, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4670IS, 1, 1, 2, 3, 1, 32, 4, 1, 1, 4, 0, 1},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME4680, 0, 0, 4, 3, 1, 32, 4, 0, 0, 4, 4, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4680I, 1, 1, 2, 3, 1, 32, 4, 1, 0, 4, 4, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4680S, 0, 0, 4, 3, 1, 32, 4, 0, 1, 4, 4, 1},
-	{PCI_DEVICE_ID_MEILHAUS_ME4680IS, 1, 1, 2, 3, 1, 32, 4, 1, 1, 4, 4, 1},
-
-	{0},
-};
-
-#define ME4600_DEVICE_VERSIONS (ARRAY_SIZE(me4600_versions) - 1)	/**< Returns the number of entries in #me4600_versions. */
-
-/**
- * @brief Returns the index of the device entry in #me4600_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #me4600_versions.
- */
-static inline unsigned int me4600_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < ME4600_DEVICE_VERSIONS; i++)
-		if (me4600_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-/**
- * @brief The ME-4600 device class structure.
- */
-typedef struct me4600_device {
-	me_device_t base;					/**< The Meilhaus device base class. */
-
-	/* Child class attributes. */
-	spinlock_t preload_reg_lock;		/**< Guards the preload register of the anaolog output devices. */
-	unsigned int preload_flags;			/**< Used in conjunction with #preload_reg_lock. */
-	spinlock_t dio_lock;				/**< Locks the control register of the digital input/output subdevices. */
-	spinlock_t ai_ctrl_lock;			/**< Locks the control register of the analog input subdevice. */
-	spinlock_t ctr_ctrl_reg_lock;		/**< Locks the counter control register. */
-	spinlock_t ctr_clk_src_reg_lock;	/**< Not used on this device but needed for the me8254 subdevice constructor call. */
-} me4600_device_t;
-
-/**
- * @brief The ME-4600 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- * @param me_bosch_fw If set the device shall use the bosch firmware. (Only for special BOSCH build)
- *
- * @return On succes a new ME-4600 device instance. \n
- *         NULL on error.
- */
-
-#ifdef BOSCH
-/**
- * @brief The ME-4600 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- * @param me_bosch_fw If set the device shall use the bosch firmware.
- *
- * @return On succes a new ME-4600 device instance. \n
- *         NULL on error.
- */
-me_device_t *me4600_pci_constructor(struct pci_dev *pci_device, int me_bosch_fw)
-    __attribute__ ((weak));
-#else //~BOSCH
-/**
- * @brief The ME-4600 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-4600 device instance. \n
- *         NULL on error.
- */
-me_device_t *me4600_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-#endif
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_di.c b/drivers/staging/meilhaus/me4600_di.c
deleted file mode 100644
index e107e50..0000000
--- a/drivers/staging/meilhaus/me4600_di.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/**
- * @file me4600_di.c
- *
- * @brief ME-4000 digital input subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me4600_dio_reg.h"
-#include "me4600_di.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me4600_di_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags)
-{
-	me4600_di_subdevice_t *instance;
-	uint32_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_di_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inl(instance->ctrl_reg);
-	mode &= ~(ME4600_DIO_CTRL_BIT_MODE_2 | ME4600_DIO_CTRL_BIT_MODE_3);	//0xFFF3
-	outl(mode, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, mode);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outl(0, instance->port_reg);
-	PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_reg - instance->reg_base, 0);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_di_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me4600_di_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_di_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-			} else {
-				PERROR("Invalid port direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_di_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me4600_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_di_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = inl(instance->port_reg) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = inl(instance->port_reg) & 0xFF;
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_di_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_di_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DI;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_di_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-me4600_di_subdevice_t *me4600_di_constructor(uint32_t reg_base,
-					     spinlock_t *ctrl_reg_lock)
-{
-	me4600_di_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me4600_di_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me4600_di_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save the subdevice index */
-	subdevice->port_reg = reg_base + ME4600_DIO_PORT_1_REG;
-	subdevice->ctrl_reg = reg_base + ME4600_DIO_CTRL_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me4600_di_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me4600_di_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me4600_di_io_single_read;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me4600_di_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me4600_di_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me4600_di_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me4600_di.h b/drivers/staging/meilhaus/me4600_di.h
deleted file mode 100644
index ec8b175..0000000
--- a/drivers/staging/meilhaus/me4600_di.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/**
- * @file me4600_di.h
- *
- * @brief ME-4000 digital input subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_DI_H_
-#define _ME4600_DI_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me4600_di_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg from concurrent access. */
-
-	unsigned long port_reg;			/**< Register holding the port status. */
-	unsigned long ctrl_reg;			/**< Register to configure the port direction. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me4600_di_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-4000 digital input subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me4600_di_subdevice_t *me4600_di_constructor(uint32_t reg_base,
-					     spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_dio.c b/drivers/staging/meilhaus/me4600_dio.c
deleted file mode 100644
index baa28ff..0000000
--- a/drivers/staging/meilhaus/me4600_dio.c
+++ /dev/null
@@ -1,510 +0,0 @@
-/**
- * @file me4600_dio.c
- *
- * @brief ME-4000 digital input/output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me4600_dio_reg.h"
-#include "me4600_dio.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me4600_dio_io_reset_subdevice(struct me_subdevice *subdevice,
-					 struct file *filep, int flags)
-{
-	me4600_dio_subdevice_t *instance;
-	uint32_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_dio_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	/* Set port to input mode */
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inl(instance->ctrl_reg);
-	mode &=
-	    ~((ME4600_DIO_CTRL_BIT_MODE_0 | ME4600_DIO_CTRL_BIT_MODE_1) <<
-	      (instance->dio_idx * 2));
-	outl(mode, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, mode);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outl(0, instance->port_reg);
-	PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_reg - instance->reg_base, 0);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_dio_io_single_config(me_subdevice_t *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int single_config,
-				       int ref,
-				       int trig_chan,
-				       int trig_type, int trig_edge, int flags)
-{
-	me4600_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t mode;
-	uint32_t size =
-	    flags & (ME_IO_SINGLE_CONFIG_DIO_BIT | ME_IO_SINGLE_CONFIG_DIO_BYTE
-		     | ME_IO_SINGLE_CONFIG_DIO_WORD |
-		     ME_IO_SINGLE_CONFIG_DIO_DWORD);
-	uint32_t mask;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inl(instance->ctrl_reg);
-	switch (size) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-				mode &=
-				    ~((ME4600_DIO_CTRL_BIT_MODE_0 |
-				       ME4600_DIO_CTRL_BIT_MODE_1) <<
-				      (instance->dio_idx * 2));
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-				mode &=
-				    ~((ME4600_DIO_CTRL_BIT_MODE_0 |
-				       ME4600_DIO_CTRL_BIT_MODE_1) <<
-				      (instance->dio_idx * 2));
-				mode |=
-				    ME4600_DIO_CTRL_BIT_MODE_0 << (instance->
-								   dio_idx * 2);
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_MUX32M) {
-				mask =
-				    (ME4600_DIO_CTRL_BIT_MODE_0 |
-				     ME4600_DIO_CTRL_BIT_MODE_1) << (instance->
-								     dio_idx *
-								     2);
-				mask |=
-				    ME4600_DIO_CTRL_BIT_FUNCTION_0 |
-				    ME4600_DIO_CTRL_BIT_FUNCTION_1;
-				mask |=
-				    ME4600_DIO_CTRL_BIT_FIFO_HIGH_0 <<
-				    instance->dio_idx;
-				mode &= ~mask;
-
-				if (ref == ME_REF_DIO_FIFO_LOW) {
-					mode |=
-					    (ME4600_DIO_CTRL_BIT_MODE_0 |
-					     ME4600_DIO_CTRL_BIT_MODE_1) <<
-					    (instance->dio_idx * 2);
-					mode |= ME4600_DIO_CTRL_BIT_FUNCTION_1;
-				} else if (ref == ME_REF_DIO_FIFO_HIGH) {
-					mode |=
-					    (ME4600_DIO_CTRL_BIT_MODE_0 |
-					     ME4600_DIO_CTRL_BIT_MODE_1) <<
-					    (instance->dio_idx * 2);
-					mode |= ME4600_DIO_CTRL_BIT_FUNCTION_1;
-					mode |=
-					    ME4600_DIO_CTRL_BIT_FIFO_HIGH_0 <<
-					    instance->dio_idx;
-				} else {
-					PERROR
-					    ("Invalid port reference specified.\n");
-					err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-				}
-			} else if (single_config ==
-				   ME_SINGLE_CONFIG_DIO_DEMUX32) {
-				mask =
-				    (ME4600_DIO_CTRL_BIT_MODE_0 |
-				     ME4600_DIO_CTRL_BIT_MODE_1) << (instance->
-								     dio_idx *
-								     2);
-				mask |=
-				    ME4600_DIO_CTRL_BIT_FUNCTION_0 |
-				    ME4600_DIO_CTRL_BIT_FUNCTION_1;
-				mask |=
-				    ME4600_DIO_CTRL_BIT_FIFO_HIGH_0 <<
-				    instance->dio_idx;
-				mode &= ~mask;
-
-				if (ref == ME_REF_DIO_FIFO_LOW) {
-					mode |=
-					    (ME4600_DIO_CTRL_BIT_MODE_0 |
-					     ME4600_DIO_CTRL_BIT_MODE_1) <<
-					    (instance->dio_idx * 2);
-					mode |= ME4600_DIO_CTRL_BIT_FUNCTION_0;
-				} else if (ref == ME_REF_DIO_FIFO_HIGH) {
-					mode |=
-					    (ME4600_DIO_CTRL_BIT_MODE_0 |
-					     ME4600_DIO_CTRL_BIT_MODE_1) <<
-					    (instance->dio_idx * 2);
-					mode |= ME4600_DIO_CTRL_BIT_FUNCTION_0;
-					mode |=
-					    ME4600_DIO_CTRL_BIT_FIFO_HIGH_0 <<
-					    instance->dio_idx;
-				} else {
-					PERROR
-					    ("Invalid port reference specified.\n");
-					err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-				}
-			} else if (single_config ==
-				   ME_SINGLE_CONFIG_DIO_BIT_PATTERN) {
-				mask =
-				    (ME4600_DIO_CTRL_BIT_MODE_0 |
-				     ME4600_DIO_CTRL_BIT_MODE_1) << (instance->
-								     dio_idx *
-								     2);
-				mask |=
-				    ME4600_DIO_CTRL_BIT_FUNCTION_0 |
-				    ME4600_DIO_CTRL_BIT_FUNCTION_1;
-				mask |=
-				    ME4600_DIO_CTRL_BIT_FIFO_HIGH_0 <<
-				    instance->dio_idx;
-				mode &= ~mask;
-
-				if (ref == ME_REF_DIO_FIFO_LOW) {
-					mode |=
-					    (ME4600_DIO_CTRL_BIT_MODE_0 |
-					     ME4600_DIO_CTRL_BIT_MODE_1) <<
-					    (instance->dio_idx * 2);
-				} else if (ref == ME_REF_DIO_FIFO_HIGH) {
-					mode |=
-					    (ME4600_DIO_CTRL_BIT_MODE_0 |
-					     ME4600_DIO_CTRL_BIT_MODE_1) <<
-					    (instance->dio_idx * 2);
-					mode |=
-					    ME4600_DIO_CTRL_BIT_FIFO_HIGH_0 <<
-					    instance->dio_idx;
-				} else {
-					PERROR
-					    ("Invalid port reference specified.\n");
-					err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-				}
-			} else {
-				PERROR
-				    ("Invalid port configuration specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!err) {
-		outl(mode, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, mode);
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_dio_io_single_read(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int *value, int time_out, int flags)
-{
-	me4600_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			mode =
-			    inl(instance->
-				ctrl_reg) & ((ME4600_DIO_CTRL_BIT_MODE_0 |
-					      ME4600_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-			if ((mode ==
-			     (ME4600_DIO_CTRL_BIT_MODE_0 <<
-			      (instance->dio_idx * 2))) || !mode) {
-				*value =
-				    inl(instance->port_reg) & (0x1 << channel);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			mode =
-			    inl(instance->
-				ctrl_reg) & ((ME4600_DIO_CTRL_BIT_MODE_0 |
-					      ME4600_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-			if ((mode ==
-			     (ME4600_DIO_CTRL_BIT_MODE_0 <<
-			      (instance->dio_idx * 2))) || !mode) {
-				*value = inl(instance->port_reg) & 0xFF;
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_dio_io_single_write(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int value, int time_out, int flags)
-{
-	me4600_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t mode;
-	uint32_t byte;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			mode =
-			    inl(instance->
-				ctrl_reg) & ((ME4600_DIO_CTRL_BIT_MODE_0 |
-					      ME4600_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-
-			if (mode ==
-			    (ME4600_DIO_CTRL_BIT_MODE_0 <<
-			     (instance->dio_idx * 2))) {
-				byte = inl(instance->port_reg) & 0xFF;
-
-				if (value)
-					byte |= 0x1 << channel;
-				else
-					byte &= ~(0x1 << channel);
-
-				outl(byte, instance->port_reg);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			mode =
-			    inl(instance->
-				ctrl_reg) & ((ME4600_DIO_CTRL_BIT_MODE_0 |
-					      ME4600_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-
-			if (mode ==
-			    (ME4600_DIO_CTRL_BIT_MODE_0 <<
-			     (instance->dio_idx * 2))) {
-				outl(value, instance->port_reg);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_dio_query_number_channels(me_subdevice_t *subdevice,
-					    int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_dio_query_subdevice_type(me_subdevice_t *subdevice,
-					   int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DIO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_dio_query_subdevice_caps(me_subdevice_t *subdevice,
-					   int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_DIO_DIR_BYTE;
-	return ME_ERRNO_SUCCESS;
-}
-
-me4600_dio_subdevice_t *me4600_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t *ctrl_reg_lock)
-{
-	me4600_dio_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me4600_dio_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me4600_dio_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save digital i/o index */
-	subdevice->dio_idx = dio_idx;
-
-	/* Save the subdevice index */
-	subdevice->ctrl_reg = reg_base + ME4600_DIO_CTRL_REG;
-	subdevice->port_reg = reg_base + ME4600_DIO_PORT_REG + (dio_idx * 4);
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me4600_dio_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me4600_dio_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me4600_dio_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me4600_dio_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me4600_dio_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me4600_dio_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me4600_dio_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me4600_dio.h b/drivers/staging/meilhaus/me4600_dio.h
deleted file mode 100644
index 4625ba9..0000000
--- a/drivers/staging/meilhaus/me4600_dio.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/**
- * @file me4600_dio.h
- *
- * @brief ME-4000 digital input/output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_DIO_H_
-#define _ME4600_DIO_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me4600_dio_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg from concurrent access. */
-	unsigned int dio_idx;			/**< The index of the digital i/o on the device. */
-
-	/* Registers */
-	unsigned long port_reg;			/**< Register holding the port status. */
-	unsigned long ctrl_reg;			/**< Register to configure the port direction. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me4600_dio_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-4000 digital input/ouput subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param dio_idx The index of the digital i/o port on the device.
- * @param ctrl_reg_lock Spin lock protecting the control register.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me4600_dio_subdevice_t *me4600_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_dio_reg.h b/drivers/staging/meilhaus/me4600_dio_reg.h
deleted file mode 100644
index 7a4016a..0000000
--- a/drivers/staging/meilhaus/me4600_dio_reg.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/**
- * @file me4600_dio_reg.h
- *
- * @brief ME-4000 digital input/output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_DIO_REG_H_
-#define _ME4600_DIO_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME4600_DIO_PORT_0_REG				0xA0					/**< Port 0 register. */
-#define ME4600_DIO_PORT_1_REG				0xA4					/**< Port 1 register. */
-#define ME4600_DIO_PORT_2_REG				0xA8					/**< Port 2 register. */
-#define ME4600_DIO_PORT_3_REG				0xAC					/**< Port 3 register. */
-
-#define ME4600_DIO_DIR_REG					0xB0					/**< Direction register. */
-#define ME4600_DIO_PORT_REG					ME4600_DIO_PORT_0_REG	/**< Base for port's register. */
-
-#define ME4600_DIO_CTRL_REG					0xB8					/**< Control register. */
-/** Port A - DO */
-#define ME4600_DIO_CTRL_BIT_MODE_0			0x0001
-#define ME4600_DIO_CTRL_BIT_MODE_1			0x0002
-/** Port B - DI */
-#define ME4600_DIO_CTRL_BIT_MODE_2			0x0004
-#define ME4600_DIO_CTRL_BIT_MODE_3			0x0008
-/** Port C - DIO */
-#define ME4600_DIO_CTRL_BIT_MODE_4			0x0010
-#define ME4600_DIO_CTRL_BIT_MODE_5			0x0020
-/** Port D - DIO */
-#define ME4600_DIO_CTRL_BIT_MODE_6			0x0040
-#define ME4600_DIO_CTRL_BIT_MODE_7			0x0080
-
-#define ME4600_DIO_CTRL_BIT_FUNCTION_0		0x0100
-#define ME4600_DIO_CTRL_BIT_FUNCTION_1		0x0200
-
-#define ME4600_DIO_CTRL_BIT_FIFO_HIGH_0		0x0400
-#define ME4600_DIO_CTRL_BIT_FIFO_HIGH_1		0x0800
-#define ME4600_DIO_CTRL_BIT_FIFO_HIGH_2		0x1000
-#define ME4600_DIO_CTRL_BIT_FIFO_HIGH_3		0x2000
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_do.c b/drivers/staging/meilhaus/me4600_do.c
deleted file mode 100644
index 39510f3..0000000
--- a/drivers/staging/meilhaus/me4600_do.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/**
- * @file me4600_do.c
- *
- * @brief ME-4000 digital output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me4600_dio_reg.h"
-#include "me4600_do.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me4600_do_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags)
-{
-	me4600_do_subdevice_t *instance;
-	uint32_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_do_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	/* Set port to output mode */
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inl(instance->ctrl_reg);
-	mode &= ~ME4600_DIO_CTRL_BIT_MODE_1;	//0xFFFD
-	mode |= ME4600_DIO_CTRL_BIT_MODE_0;	//0x1
-	outl(mode, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, mode);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outl(0, instance->port_reg);
-	PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_reg - instance->reg_base, 0);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_do_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me4600_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t mode;
-	int size =
-	    flags & (ME_IO_SINGLE_CONFIG_DIO_BIT | ME_IO_SINGLE_CONFIG_DIO_BYTE
-		     | ME_IO_SINGLE_CONFIG_DIO_WORD |
-		     ME_IO_SINGLE_CONFIG_DIO_DWORD);
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inl(instance->ctrl_reg);
-
-	switch (size) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-				mode &= ~(ME4600_DIO_CTRL_BIT_MODE_0 |
-					  ME4600_DIO_CTRL_BIT_MODE_1);
-				mode |= (ME4600_DIO_CTRL_BIT_MODE_0);
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_MUX32M) {
-				mode &= ~(ME4600_DIO_CTRL_BIT_MODE_0 |
-					  ME4600_DIO_CTRL_BIT_MODE_1 |
-					  ME4600_DIO_CTRL_BIT_FUNCTION_0 |
-					  ME4600_DIO_CTRL_BIT_FUNCTION_1 |
-					  ME4600_DIO_CTRL_BIT_FIFO_HIGH_0);
-
-				if (ref == ME_REF_DIO_FIFO_LOW) {
-					mode |= (ME4600_DIO_CTRL_BIT_MODE_0 |
-						 ME4600_DIO_CTRL_BIT_MODE_1 |
-						 ME4600_DIO_CTRL_BIT_FUNCTION_1);
-				} else if (ref == ME_REF_DIO_FIFO_HIGH) {
-					mode |= (ME4600_DIO_CTRL_BIT_MODE_0 |
-						 ME4600_DIO_CTRL_BIT_MODE_1 |
-						 ME4600_DIO_CTRL_BIT_FUNCTION_1
-						 |
-						 ME4600_DIO_CTRL_BIT_FIFO_HIGH_0);
-				} else {
-					PERROR
-					    ("Invalid port reference specified.\n");
-					err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-				}
-			} else if (single_config ==
-				   ME_SINGLE_CONFIG_DIO_DEMUX32) {
-				mode &=
-				    ~(ME4600_DIO_CTRL_BIT_MODE_0 |
-				      ME4600_DIO_CTRL_BIT_MODE_1 |
-				      ME4600_DIO_CTRL_BIT_FUNCTION_0 |
-				      ME4600_DIO_CTRL_BIT_FUNCTION_1 |
-				      ME4600_DIO_CTRL_BIT_FIFO_HIGH_0);
-
-				if (ref == ME_REF_DIO_FIFO_LOW) {
-					mode |= (ME4600_DIO_CTRL_BIT_MODE_0 |
-						 ME4600_DIO_CTRL_BIT_MODE_1 |
-						 ME4600_DIO_CTRL_BIT_FUNCTION_0);
-				} else if (ref == ME_REF_DIO_FIFO_HIGH) {
-					mode |= (ME4600_DIO_CTRL_BIT_MODE_0 |
-						 ME4600_DIO_CTRL_BIT_MODE_1 |
-						 ME4600_DIO_CTRL_BIT_FUNCTION_0
-						 |
-						 ME4600_DIO_CTRL_BIT_FIFO_HIGH_0);
-				} else {
-					PERROR
-					    ("Invalid port reference specified.\n");
-					err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-				}
-			} else if (single_config ==
-				   ME_SINGLE_CONFIG_DIO_BIT_PATTERN) {
-				mode &=
-				    ~(ME4600_DIO_CTRL_BIT_MODE_0 |
-				      ME4600_DIO_CTRL_BIT_MODE_1 |
-				      ME4600_DIO_CTRL_BIT_FUNCTION_0 |
-				      ME4600_DIO_CTRL_BIT_FUNCTION_1 |
-				      ME4600_DIO_CTRL_BIT_FIFO_HIGH_0);
-
-				if (ref == ME_REF_DIO_FIFO_LOW) {
-					mode |= (ME4600_DIO_CTRL_BIT_MODE_0 |
-						 ME4600_DIO_CTRL_BIT_MODE_1);
-				} else if (ref == ME_REF_DIO_FIFO_HIGH) {
-					mode |= (ME4600_DIO_CTRL_BIT_MODE_0 |
-						 ME4600_DIO_CTRL_BIT_MODE_1 |
-						 ME4600_DIO_CTRL_BIT_FIFO_HIGH_0);
-				} else {
-					PERROR
-					    ("Invalid port reference specified.\n");
-					err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-				}
-			} else {
-				PERROR("Invalid port direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!err) {
-		outl(mode, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, mode);
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_do_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me4600_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode =
-	    inl(instance->
-		ctrl_reg) & (ME4600_DIO_CTRL_BIT_MODE_0 |
-			     ME4600_DIO_CTRL_BIT_MODE_1);
-
-	if (mode == ME4600_DIO_CTRL_BIT_MODE_0) {
-		switch (flags) {
-		case ME_IO_SINGLE_TYPE_DIO_BIT:
-			if ((channel >= 0) && (channel < 8)) {
-				*value =
-				    inl(instance->port_reg) & (0x1 << channel);
-			} else {
-				PERROR("Invalid bit number specified.\n");
-				err = ME_ERRNO_INVALID_CHANNEL;
-			}
-			break;
-
-		case ME_IO_SINGLE_NO_FLAGS:
-		case ME_IO_SINGLE_TYPE_DIO_BYTE:
-			if (channel == 0) {
-				*value = inl(instance->port_reg) & 0xFF;
-			} else {
-				PERROR("Invalid byte number specified.\n");
-				err = ME_ERRNO_INVALID_CHANNEL;
-			}
-			break;
-
-		default:
-			PERROR("Invalid flags specified.\n");
-			err = ME_ERRNO_INVALID_FLAGS;
-		}
-	} else {
-		PERROR("Port not in output mode.\n");
-		err = ME_ERRNO_PREVIOUS_CONFIG;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_do_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	me4600_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t byte;
-	uint32_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode =
-	    inl(instance->
-		ctrl_reg) & (ME4600_DIO_CTRL_BIT_MODE_0 |
-			     ME4600_DIO_CTRL_BIT_MODE_1);
-
-	if (mode == ME4600_DIO_CTRL_BIT_MODE_0) {
-		switch (flags) {
-
-		case ME_IO_SINGLE_TYPE_DIO_BIT:
-			if ((channel >= 0) && (channel < 8)) {
-				byte = inl(instance->port_reg) & 0xFF;
-
-				if (value)
-					byte |= 0x1 << channel;
-				else
-					byte &= ~(0x1 << channel);
-
-				outl(byte, instance->port_reg);
-			} else {
-				PERROR("Invalid bit number specified.\n");
-				err = ME_ERRNO_INVALID_CHANNEL;
-			}
-			break;
-
-		case ME_IO_SINGLE_NO_FLAGS:
-		case ME_IO_SINGLE_TYPE_DIO_BYTE:
-			if (channel == 0) {
-				outl(value, instance->port_reg);
-			} else {
-				PERROR("Invalid byte number specified.\n");
-				err = ME_ERRNO_INVALID_CHANNEL;
-			}
-			break;
-
-		default:
-			PERROR("Invalid flags specified.\n");
-			err = ME_ERRNO_INVALID_FLAGS;
-		}
-	} else {
-		PERROR("Port not in output mode.\n");
-		err = ME_ERRNO_PREVIOUS_CONFIG;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_do_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_do_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_do_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-me4600_do_subdevice_t *me4600_do_constructor(uint32_t reg_base,
-					     spinlock_t *ctrl_reg_lock)
-{
-	me4600_do_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me4600_do_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me4600_do_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save the subdevice index */
-	subdevice->ctrl_reg = reg_base + ME4600_DIO_CTRL_REG;
-	subdevice->port_reg = reg_base + ME4600_DIO_PORT_0_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me4600_do_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me4600_do_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me4600_do_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me4600_do_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me4600_do_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me4600_do_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me4600_do_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me4600_do.h b/drivers/staging/meilhaus/me4600_do.h
deleted file mode 100644
index e838564..0000000
--- a/drivers/staging/meilhaus/me4600_do.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/**
- * @file me4600_do.h
- *
- * @brief ME-4000 digital output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_DO_H_
-#define _ME4600_DO_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me4600_do_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg from concurrent access. */
-
-	unsigned long port_reg;			/**< Register holding the port status. */
-	unsigned long ctrl_reg;			/**< Register to configure the port direction. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me4600_do_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-4000 digital output subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param ctrl_reg_lock Spin lock protecting the control register.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me4600_do_subdevice_t *me4600_do_constructor(uint32_t reg_base,
-					     spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_ext_irq.c b/drivers/staging/meilhaus/me4600_ext_irq.c
deleted file mode 100644
index cfb4adb..0000000
--- a/drivers/staging/meilhaus/me4600_ext_irq.c
+++ /dev/null
@@ -1,457 +0,0 @@
-/**
- * @file me4600_ext_irq.c
- *
- * @brief ME-4000 external interrupt subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "meids.h"
-#include "me4600_reg.h"
-#include "me4600_ai_reg.h"
-#include "me4600_ext_irq_reg.h"
-#include "me4600_ext_irq.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me4600_ext_irq_io_irq_start(me_subdevice_t *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int irq_source,
-				       int irq_edge, int irq_arg, int flags)
-{
-	me4600_ext_irq_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags;
-	uint32_t tmp;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ext_irq_subdevice_t *) subdevice;
-
-	if (flags & ~ME_IO_IRQ_START_DIO_BIT) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((irq_edge != ME_IRQ_EDGE_RISING)
-	    && (irq_edge != ME_IRQ_EDGE_FALLING)
-	    && (irq_edge != ME_IRQ_EDGE_ANY)
-	    ) {
-		PERROR("Invalid irq edge specified.\n");
-		return ME_ERRNO_INVALID_IRQ_EDGE;
-	}
-
-	if (irq_source != ME_IRQ_SOURCE_DIO_LINE) {
-		PERROR("Invalid irq source specified.\n");
-		return ME_ERRNO_INVALID_IRQ_SOURCE;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	tmp = 0x0;		//inl(instance->ext_irq_config_reg);
-
-	if (irq_edge == ME_IRQ_EDGE_RISING) {
-		//tmp &= ~ME4600_EXT_IRQ_CONFIG_MASK;
-		//tmp |= ME4600_EXT_IRQ_CONFIG_MASK_RISING;
-	} else if (irq_edge == ME_IRQ_EDGE_FALLING) {
-		//tmp &= ~ME4600_EXT_IRQ_CONFIG_MASK;
-		//tmp |= ME4600_EXT_IRQ_CONFIG_MASK_FALLING;
-		tmp = ME4600_EXT_IRQ_CONFIG_MASK_FALLING;
-	} else if (irq_edge == ME_IRQ_EDGE_ANY) {
-		//tmp &= ~ME4600_EXT_IRQ_CONFIG_MASK;
-		//tmp |= ME4600_EXT_IRQ_CONFIG_MASK_ANY;
-		tmp = ME4600_EXT_IRQ_CONFIG_MASK_ANY;
-	}
-
-	outl(tmp, instance->ext_irq_config_reg);
-	PDEBUG_REG("ext_irq_config_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->ext_irq_config_reg - instance->reg_base, tmp);
-
-	spin_lock_irqsave(instance->ctrl_reg_lock, cpu_flags);
-	tmp = inl(instance->ctrl_reg);
-	tmp &= ~(ME4600_AI_CTRL_BIT_EX_IRQ | ME4600_AI_CTRL_BIT_EX_IRQ_RESET);
-	tmp |= ME4600_AI_CTRL_BIT_EX_IRQ;
-	outl(tmp, instance->ctrl_reg);
-	spin_unlock_irqrestore(instance->ctrl_reg_lock, cpu_flags);
-	instance->rised = 0;
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ext_irq_io_irq_wait(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int *irq_count,
-				      int *value, int time_out, int flags)
-{
-	me4600_ext_irq_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	long t = 0;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ext_irq_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		t = (time_out * HZ) / 1000;
-
-		if (t == 0)
-			t = 1;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (instance->rised <= 0) {
-		instance->rised = 0;
-		if (time_out) {
-			t = wait_event_interruptible_timeout(instance->
-							     wait_queue,
-							     (instance->rised !=
-							      0), t);
-
-			if (t == 0) {
-				PERROR
-				    ("Wait on external interrupt timed out.\n");
-				err = ME_ERRNO_TIMEOUT;
-			}
-		} else {
-			wait_event_interruptible(instance->wait_queue,
-						 (instance->rised != 0));
-		}
-
-		if (instance->rised < 0) {
-			PERROR("Wait on interrupt aborted by user.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-	}
-
-	if (signal_pending(current)) {
-		PERROR("Wait on external interrupt aborted by signal.\n");
-		err = ME_ERRNO_SIGNAL;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	instance->rised = 0;
-	*irq_count = instance->count;
-	*value = instance->value;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ext_irq_io_irq_stop(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel, int flags)
-{
-	me4600_ext_irq_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags;
-	uint32_t tmp;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ext_irq_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->ctrl_reg_lock);
-	tmp = inl(instance->ctrl_reg);
-	tmp &= ~(ME4600_AI_CTRL_BIT_EX_IRQ | ME4600_AI_CTRL_BIT_EX_IRQ_RESET);
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_regv outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->ctrl_reg_lock);
-	instance->rised = -1;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me4600_ext_irq_io_reset_subdevice(me_subdevice_t *subdevice,
-					     struct file *filep, int flags)
-{
-	me4600_ext_irq_subdevice_t *instance;
-	unsigned long cpu_flags;
-	uint32_t tmp;
-
-	PDEBUG("executed.\n");
-
-	instance = (me4600_ext_irq_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->ctrl_reg_lock);
-	tmp = inl(instance->ctrl_reg);
-	tmp &= ~(ME4600_AI_CTRL_BIT_EX_IRQ | ME4600_AI_CTRL_BIT_EX_IRQ_RESET);
-	outl(tmp, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_regv outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->ctrl_reg_lock);
-	instance->rised = -1;
-	instance->count = 0;
-	outl(ME4600_EXT_IRQ_CONFIG_MASK_ANY, instance->ext_irq_config_reg);
-	PDEBUG_REG("ext_irq_config_reg outl(0x%lX+0x%lX)=0x%x\n",
-		   instance->reg_base,
-		   instance->ext_irq_config_reg - instance->reg_base,
-		   ME4600_EXT_IRQ_CONFIG_MASK_ANY);
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static void me4600_ext_irq_destructor(struct me_subdevice *subdevice)
-{
-	me4600_ext_irq_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-	instance = (me4600_ext_irq_subdevice_t *) subdevice;
-	me_subdevice_deinit(&instance->base);
-	free_irq(instance->irq, instance);
-	kfree(instance);
-}
-
-static int me4600_ext_irq_query_number_channels(me_subdevice_t *subdevice,
-						int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 1;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ext_irq_query_subdevice_type(me_subdevice_t *subdevice,
-					       int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_EXT_IRQ;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ext_irq_query_subdevice_caps(me_subdevice_t *subdevice,
-					       int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps =
-	    ME_CAPS_EXT_IRQ_EDGE_RISING | ME_CAPS_EXT_IRQ_EDGE_FALLING |
-	    ME_CAPS_EXT_IRQ_EDGE_ANY;
-	return ME_ERRNO_SUCCESS;
-}
-
-static irqreturn_t me4600_ext_irq_isr(int irq, void *dev_id)
-{
-	me4600_ext_irq_subdevice_t *instance;
-	uint32_t ctrl;
-	uint32_t irq_status;
-
-	instance = (me4600_ext_irq_subdevice_t *) dev_id;
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	irq_status = inl(instance->irq_status_reg);
-	if (!(irq_status & ME4600_IRQ_STATUS_BIT_EX)) {
-		PINFO("%ld Shared interrupt. %s(): irq_status_reg=0x%04X\n",
-		      jiffies, __func__, irq_status);
-		return IRQ_NONE;
-	}
-
-	PDEBUG("executed.\n");
-
-	spin_lock(&instance->subdevice_lock);
-	instance->rised = 1;
-	instance->value = inl(instance->ext_irq_value_reg);
-	instance->count++;
-
-	spin_lock(instance->ctrl_reg_lock);
-	ctrl = inl(instance->ctrl_reg);
-	ctrl |= ME4600_AI_CTRL_BIT_EX_IRQ_RESET;
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	ctrl &= ~ME4600_AI_CTRL_BIT_EX_IRQ_RESET;
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	spin_unlock(&instance->subdevice_lock);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return IRQ_HANDLED;
-}
-
-me4600_ext_irq_subdevice_t *me4600_ext_irq_constructor(uint32_t reg_base,
-						       int irq,
-						       spinlock_t *
-						       ctrl_reg_lock)
-{
-	me4600_ext_irq_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me4600_ext_irq_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me4600_ext_irq_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Initialize wait queue */
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	/* Register interrupt */
-	subdevice->irq = irq;
-
-	if (request_irq(subdevice->irq, me4600_ext_irq_isr,
-			IRQF_DISABLED | IRQF_SHARED,
-			ME4600_NAME, subdevice)) {
-		PERROR("Cannot register interrupt.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	PINFO("Registered irq=%d.\n", subdevice->irq);
-
-	/* Initialize registers */
-	subdevice->irq_status_reg = reg_base + ME4600_IRQ_STATUS_REG;
-	subdevice->ctrl_reg = reg_base + ME4600_AI_CTRL_REG;
-	subdevice->ext_irq_config_reg = reg_base + ME4600_EXT_IRQ_CONFIG_REG;
-	subdevice->ext_irq_value_reg = reg_base + ME4600_EXT_IRQ_VALUE_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Override base class methods. */
-	subdevice->base.me_subdevice_destructor = me4600_ext_irq_destructor;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me4600_ext_irq_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_irq_start = me4600_ext_irq_io_irq_start;
-	subdevice->base.me_subdevice_io_irq_wait = me4600_ext_irq_io_irq_wait;
-	subdevice->base.me_subdevice_io_irq_stop = me4600_ext_irq_io_irq_stop;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me4600_ext_irq_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me4600_ext_irq_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me4600_ext_irq_query_subdevice_caps;
-
-	subdevice->rised = 0;
-	subdevice->count = 0;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me4600_ext_irq.h b/drivers/staging/meilhaus/me4600_ext_irq.h
deleted file mode 100644
index 3c7b27f..0000000
--- a/drivers/staging/meilhaus/me4600_ext_irq.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/**
- * @file me4600_ext_irq.h
- *
- * @brief Meilhaus ME-4000 external interrupt subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_EXT_IRQ_H_
-#define _ME4600_EXT_IRQ_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The subdevice class.
- */
-typedef struct me4600_ext_irq_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg from concurrent access. */
-
-	wait_queue_head_t wait_queue;
-
-	int irq;
-
-	int rised;
-	int value;
-	int count;
-
-	unsigned long ctrl_reg;
-	unsigned long irq_status_reg;
-	unsigned long ext_irq_config_reg;
-	unsigned long ext_irq_value_reg;
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me4600_ext_irq_subdevice_t;
-
-/**
- * @brief The constructor to generate a external interrupt subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param irq The interrupt number assigned by the PCI BIOS.
- * @param ctrl_reg_lock Pointer to spin lock protecting the control register from concurrent access.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me4600_ext_irq_subdevice_t *me4600_ext_irq_constructor(uint32_t reg_base,
-						       int irq,
-						       spinlock_t *
-						       ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_ext_irq_reg.h b/drivers/staging/meilhaus/me4600_ext_irq_reg.h
deleted file mode 100644
index 898e1e7..0000000
--- a/drivers/staging/meilhaus/me4600_ext_irq_reg.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/**
- * @file me4600_ext_irq_reg.h
- *
- * @brief ME-4000 external interrupt subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_EXT_IRQ_REG_H_
-#define _ME4600_EXT_IRQ_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME4600_EXT_IRQ_CONFIG_REG		0xCC	// R/_
-#define ME4600_EXT_IRQ_VALUE_REG		0xD0	// R/_
-
-#define ME4600_EXT_IRQ_CONFIG_MASK_RISING	0x0
-#define ME4600_EXT_IRQ_CONFIG_MASK_FALLING	0x1
-#define ME4600_EXT_IRQ_CONFIG_MASK_ANY		0x3
-#define ME4600_EXT_IRQ_CONFIG_MASK		0x3
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me4600_reg.h b/drivers/staging/meilhaus/me4600_reg.h
deleted file mode 100644
index ae152bb..0000000
--- a/drivers/staging/meilhaus/me4600_reg.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/**
- * @file me4600_reg.h
- *
- * @brief ME-4000 register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME4600_REG_H_
-#define _ME4600_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME4600_IRQ_STATUS_REG			0x9C	// R/_
-
-#define ME4600_IRQ_STATUS_BIT_EX		0x01
-#define ME4600_IRQ_STATUS_BIT_LE		0x02
-#define ME4600_IRQ_STATUS_BIT_AI_HF		0x04
-#define ME4600_IRQ_STATUS_BIT_AO_0_HF	0x08
-#define ME4600_IRQ_STATUS_BIT_AO_1_HF	0x10
-#define ME4600_IRQ_STATUS_BIT_AO_2_HF	0x20
-#define ME4600_IRQ_STATUS_BIT_AO_3_HF	0x40
-#define ME4600_IRQ_STATUS_BIT_SC		0x80
-
-#define ME4600_IRQ_STATUS_BIT_AO_HF		ME4600_IRQ_STATUS_BIT_AO_0_HF
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me6000_ao.c b/drivers/staging/meilhaus/me6000_ao.c
deleted file mode 100644
index 66652dc..0000000
--- a/drivers/staging/meilhaus/me6000_ao.c
+++ /dev/null
@@ -1,3709 +0,0 @@
-/**
- * @file me6000_ao.c
- *
- * @brief ME-6000 analog output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/* Includes
- */
-#include <linux/version.h>
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <linux/workqueue.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "meids.h"
-#include "me6000_reg.h"
-#include "me6000_ao_reg.h"
-#include "me6000_ao.h"
-
-/* Defines
- */
-
-static int me6000_ao_query_range_by_min_max(me_subdevice_t *subdevice,
-					    int unit,
-					    int *min,
-					    int *max, int *maxdata, int *range);
-
-static int me6000_ao_query_number_ranges(me_subdevice_t *subdevice,
-					 int unit, int *count);
-
-static int me6000_ao_query_range_info(me_subdevice_t *subdevice,
-				      int range,
-				      int *unit,
-				      int *min, int *max, int *maxdata);
-
-static int me6000_ao_query_timer(me_subdevice_t *subdevice,
-				 int timer,
-				 int *base_frequency,
-				 long long *min_ticks, long long *max_ticks);
-
-static int me6000_ao_query_number_channels(me_subdevice_t *subdevice,
-					   int *number);
-
-static int me6000_ao_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype);
-
-static int me6000_ao_query_subdevice_caps(me_subdevice_t *subdevice,
-					  int *caps);
-
-static int me6000_ao_query_subdevice_caps_args(struct me_subdevice *subdevice,
-					       int cap, int *args, int count);
-
-/** Remove subdevice. */
-static void me6000_ao_destructor(struct me_subdevice *subdevice);
-
-/** Reset subdevice. Stop all actions. Reset registry. Disable FIFO. Set output to 0V and status to 'none'. */
-static int me6000_ao_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags);
-
-/** Set output as single */
-static int me6000_ao_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags);
-
-/** Pass to user actual value of output. */
-static int me6000_ao_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags);
-
-/** Write to output requed value. */
-static int me6000_ao_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags);
-
-/** Set output as streamed device. */
-static int me6000_ao_io_stream_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      meIOStreamConfig_t *config_list,
-				      int count,
-				      meIOStreamTrigger_t *trigger,
-				      int fifo_irq_threshold, int flags);
-
-/** Wait for / Check empty space in buffer. */
-static int me6000_ao_io_stream_new_values(me_subdevice_t *subdevice,
-					  struct file *filep,
-					  int time_out, int *count, int flags);
-
-/** Start streaming. */
-static int me6000_ao_io_stream_start(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int start_mode, int time_out, int flags);
-
-/** Check actual state. / Wait for end. */
-static int me6000_ao_io_stream_status(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int wait,
-				      int *status, int *values, int flags);
-
-/** Stop streaming. */
-static int me6000_ao_io_stream_stop(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int stop_mode, int flags);
-
-/** Write datas to buffor. */
-static int me6000_ao_io_stream_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int write_mode,
-				     int *values, int *count, int flags);
-
-/** Interrupt handler. Copy from buffer to FIFO. */
-static irqreturn_t me6000_ao_isr(int irq, void *dev_id);
-
-/** Copy data from circular buffer to fifo (fast) in wraparound mode. */
-inline int ao_write_data_wraparound(me6000_ao_subdevice_t *instance, int count,
-				    int start_pos);
-
-/** Copy data from circular buffer to fifo (fast).*/
-inline int ao_write_data(me6000_ao_subdevice_t *instance, int count,
-			 int start_pos);
-
-/** Copy data from circular buffer to fifo (slow).*/
-inline int ao_write_data_pooling(me6000_ao_subdevice_t *instance, int count,
-				 int start_pos);
-
-/** Copy data from user space to circular buffer. */
-inline int ao_get_data_from_user(me6000_ao_subdevice_t *instance, int count,
-				 int *user_values);
-
-/** Stop presentation. Preserve FIFOs. */
-inline int ao_stop_immediately(me6000_ao_subdevice_t *instance);
-
-/** Function for checking timeout in non-blocking mode. */
-static void me6000_ao_work_control_task(struct work_struct *work);
-
-/* Functions
- */
-
-static int me6000_ao_io_reset_subdevice(me_subdevice_t *subdevice,
-					struct file *filep, int flags)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t tmp;
-	uint32_t ctrl;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	instance->status = ao_status_none;
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-	instance->timeout.delay = 0;
-	instance->timeout.start_time = jiffies;
-
-	//Stop state machine.
-	err = ao_stop_immediately(instance);
-
-	//Remove from synchronous start.
-	spin_lock(instance->preload_reg_lock);
-	tmp = inl(instance->preload_reg);
-	tmp &=
-	    ~((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) << instance->
-	      ao_idx);
-	outl(tmp, instance->preload_reg);
-	PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, tmp);
-	*instance->preload_flags &=
-	    ~((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) << instance->
-	      ao_idx);
-
-	//Reset triggering flag
-	*instance->triggering_flags &= ~(0x1 << instance->ao_idx);
-	spin_unlock(instance->preload_reg_lock);
-
-	if (instance->fifo) {
-		//Set single mode, dissable FIFO, dissable external trigger, block interrupt.
-		ctrl = ME6000_AO_MODE_SINGLE;
-
-		//Block ISM.
-		ctrl |=
-		    (ME6000_AO_CTRL_BIT_STOP |
-		     ME6000_AO_CTRL_BIT_IMMEDIATE_STOP);
-
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-		//Set speed
-		outl(ME6000_AO_MIN_CHAN_TICKS - 1, instance->timer_reg);
-		//Reset interrupt latch
-		inl(instance->irq_reset_reg);
-	}
-
-	instance->hardware_stop_delay = HZ / 10;	//100ms
-
-	//Set output to 0V
-	outl(0x8000, instance->single_reg);
-	PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->single_reg - instance->reg_base, 0x8000);
-
-	instance->circ_buf.head = 0;
-	instance->circ_buf.tail = 0;
-	instance->preloaded_count = 0;
-	instance->data_count = 0;
-	instance->single_value = 0x8000;
-	instance->single_value_in_fifo = 0x8000;
-
-	//Set status to signal that device is unconfigured.
-	instance->status = ao_status_none;
-	//Signal reset if user is on wait.
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_ao_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t ctrl;
-	uint32_t sync;
-	unsigned long cpu_flags;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. ID=%d\n", instance->ao_idx);
-
-	// Checking parameters
-	if (flags) {
-		PERROR
-		    ("Invalid flag specified. Must be ME_IO_SINGLE_CONFIG_NO_FLAGS.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (instance->fifo) {	//Stream hardware (with or without fifo)
-		if ((trig_edge == ME_TRIG_TYPE_SW)
-		    && (trig_edge != ME_TRIG_EDGE_NONE)) {
-			PERROR
-			    ("Invalid trigger edge. Software trigger has not edge.\n");
-			return ME_ERRNO_INVALID_TRIG_EDGE;
-		}
-
-		if (trig_type == ME_TRIG_TYPE_EXT_DIGITAL) {
-			switch (trig_edge) {
-			case ME_TRIG_EDGE_ANY:
-			case ME_TRIG_EDGE_RISING:
-			case ME_TRIG_EDGE_FALLING:
-				break;
-
-			default:
-				PERROR("Invalid trigger edge.\n");
-				return ME_ERRNO_INVALID_TRIG_EDGE;
-			}
-		}
-
-		if ((trig_type != ME_TRIG_TYPE_SW)
-		    && (trig_type != ME_TRIG_TYPE_EXT_DIGITAL)) {
-			PERROR
-			    ("Invalid trigger type. Trigger must be software or digital.\n");
-			return ME_ERRNO_INVALID_TRIG_TYPE;
-		}
-	} else {		//Single
-		if (trig_edge != ME_TRIG_EDGE_NONE) {
-			PERROR
-			    ("Invalid trigger edge. Single output trigger hasn't own edge.\n");
-			return ME_ERRNO_INVALID_TRIG_EDGE;
-		}
-
-		if (trig_type != ME_TRIG_TYPE_SW) {
-			PERROR
-			    ("Invalid trigger type. Trigger must be software.\n");
-			return ME_ERRNO_INVALID_TRIG_TYPE;
-		}
-
-	}
-
-	if ((trig_chan != ME_TRIG_CHAN_DEFAULT)
-	    && (trig_chan != ME_TRIG_CHAN_SYNCHRONOUS)) {
-		PERROR("Invalid trigger channel specified.\n");
-		return ME_ERRNO_INVALID_TRIG_CHAN;
-	}
-/*
-	if ((trig_type == ME_TRIG_TYPE_EXT_DIGITAL) && (trig_chan != ME_TRIG_CHAN_SYNCHRONOUS))
-	{
-		PERROR("Invalid trigger channel specified. Must be synchronous when digital is choose.\n");
-		return ME_ERRNO_INVALID_TRIG_CHAN;
-	}
-*/
-	if (ref != ME_REF_AO_GROUND) {
-		PERROR
-		    ("Invalid reference. Analog outputs have to have got REF_AO_GROUND.\n");
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	if (single_config != 0) {
-		PERROR
-		    ("Invalid single config specified. Only one range for anlog outputs is available.\n");
-		return ME_ERRNO_INVALID_SINGLE_CONFIG;
-	}
-
-	if (channel != 0) {
-		PERROR
-		    ("Invalid channel number specified. Analog output have only one channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	//Subdevice running in stream mode!
-	if ((instance->status >= ao_status_stream_run_wait)
-	    && (instance->status < ao_status_stream_end)) {
-		PERROR("Subdevice is busy.\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-/// @note For single all calls (config and write) are erasing previous state!
-
-	instance->status = ao_status_none;
-
-	// Correct single mirrors
-	instance->single_value_in_fifo = instance->single_value;
-
-	//Stop device
-	err = ao_stop_immediately(instance);
-	if (err) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-
-	if (instance->fifo) {	// Set control register.
-		spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-		// Set stop bit. Stop streaming mode (If running.).
-		ctrl = inl(instance->ctrl_reg);
-		//Reset all bits.
-		ctrl =
-		    ME6000_AO_CTRL_BIT_IMMEDIATE_STOP | ME6000_AO_CTRL_BIT_STOP;
-		if (trig_type == ME_TRIG_TYPE_EXT_DIGITAL) {
-			PINFO("External digital trigger.\n");
-
-			if (trig_edge == ME_TRIG_EDGE_ANY) {
-//                                      ctrl |= ME6000_AO_CTRL_BIT_EX_TRIG_EDGE | ME6000_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-				instance->ctrl_trg =
-				    ME6000_AO_CTRL_BIT_EX_TRIG_EDGE |
-				    ME6000_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-			} else if (trig_edge == ME_TRIG_EDGE_FALLING) {
-//                                      ctrl |= ME6000_AO_CTRL_BIT_EX_TRIG_EDGE;
-				instance->ctrl_trg =
-				    ME6000_AO_CTRL_BIT_EX_TRIG_EDGE;
-			} else if (trig_edge == ME_TRIG_EDGE_RISING) {
-				instance->ctrl_trg = 0x0;
-			}
-		} else if (trig_type == ME_TRIG_TYPE_SW) {
-			PDEBUG("SOFTWARE TRIGGER\n");
-			instance->ctrl_trg = 0x0;
-		}
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	} else {
-		PDEBUG("SOFTWARE TRIGGER\n");
-	}
-
-	// Set preload/synchronization register.
-	spin_lock(instance->preload_reg_lock);
-
-	if (trig_type == ME_TRIG_TYPE_SW) {
-		*instance->preload_flags &=
-		    ~(ME6000_AO_SYNC_EXT_TRIG << instance->ao_idx);
-	} else			//if (trig_type == ME_TRIG_TYPE_EXT_DIGITAL)
-	{
-		*instance->preload_flags |=
-		    ME6000_AO_SYNC_EXT_TRIG << instance->ao_idx;
-	}
-
-	if (trig_chan == ME_TRIG_CHAN_DEFAULT) {
-		*instance->preload_flags &=
-		    ~(ME6000_AO_SYNC_HOLD << instance->ao_idx);
-	} else			//if (trig_chan == ME_TRIG_CHAN_SYNCHRONOUS)
-	{
-		*instance->preload_flags |=
-		    ME6000_AO_SYNC_HOLD << instance->ao_idx;
-	}
-
-	//Reset hardware register
-	sync = inl(instance->preload_reg);
-	PDEBUG_REG("preload_reg inl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, sync);
-	sync &= ~(ME6000_AO_SYNC_EXT_TRIG << instance->ao_idx);
-	sync |= ME6000_AO_SYNC_HOLD << instance->ao_idx;
-
-	//Output configured in default mode (safe one)
-	outl(sync, instance->preload_reg);
-	PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, sync);
-	spin_unlock(instance->preload_reg_lock);
-
-	instance->status = ao_status_single_configured;
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_ao_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	unsigned long j;
-	unsigned long delay = 0;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags & ~ME_IO_SINGLE_NONBLOCKING) {
-		PERROR("Invalid flag specified. %d\n", flags);
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((instance->status >= ao_status_stream_configured)
-	    && (instance->status <= ao_status_stream_end)) {
-		PERROR("Subdevice not configured to work in single mode!\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	if (channel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	ME_SUBDEVICE_ENTER;
-	if ((!flags) && (instance->status == ao_status_single_run_wait)) {	//Blocking mode. Wait for trigger.
-		if (time_out) {
-			delay = (time_out * HZ) / 1000;
-			if (delay == 0)
-				delay = 1;
-		}
-
-		j = jiffies;
-
-		//Only runing process will interrupt this call. Events are signaled when status change. This procedure has own timeout.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ao_status_single_run_wait),
-						 (delay) ? delay : LONG_MAX);
-
-		if (instance->status == ao_status_none) {
-			PDEBUG("Single canceled.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		if ((delay) && ((jiffies - j) >= delay)) {
-			PDEBUG("Timeout reached.\n");
-			err = ME_ERRNO_TIMEOUT;
-		}
-
-		*value =
-		    (!err) ? instance->single_value_in_fifo : instance->
-		    single_value;
-	} else {		//Non-blocking mode
-		//Read value
-		*value = instance->single_value;
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_ao_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags;
-	unsigned long j;
-	unsigned long delay = 0;
-
-	uint32_t sync_mask;
-	uint32_t mode;
-
-	uint32_t tmp;
-
-/// Workaround for mix-mode - begin
-	uint32_t ctrl = 0x0;
-	uint32_t status;
-/// Workaround for mix-mode - end
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags &
-	    ~(ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS |
-	      ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING)) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((instance->status == ao_status_none)
-	    || (instance->status > ao_status_single_end)) {
-		PERROR("Subdevice not configured to work in single mode!\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	if (channel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (value & ~ME6000_AO_MAX_DATA) {
-		PERROR("Invalid value provided.\n");
-		return ME_ERRNO_VALUE_OUT_OF_RANGE;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-/// @note For single all calls (config and write) are erasing previous state!
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-
-	// Correct single mirrors
-	instance->single_value_in_fifo = instance->single_value;
-
-	//Stop device
-	err = ao_stop_immediately(instance);
-	if (err) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-
-		if (delay == 0)
-			delay = 1;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-
-	instance->single_value_in_fifo = value;
-
-	if (instance->fifo) {
-		ctrl = inl(instance->ctrl_reg);
-	}
-
-	if (instance->fifo & ME6000_AO_HAS_FIFO) {	/// Workaround for mix-mode - begin
-		//Set speed
-		outl(ME6000_AO_MIN_CHAN_TICKS - 1, instance->timer_reg);
-		PDEBUG_REG("timer_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->timer_reg - instance->reg_base,
-			   (int)ME6000_AO_MIN_CHAN_TICKS);
-		instance->hardware_stop_delay = HZ / 10;	//100ms
-
-		status = inl(instance->status_reg);
-
-		//Set the continous mode.
-		ctrl &= ~ME6000_AO_CTRL_MODE_MASK;
-		ctrl |= ME6000_AO_MODE_CONTINUOUS;
-
-		//Prepare FIFO
-		if (!(ctrl & ME6000_AO_CTRL_BIT_ENABLE_FIFO)) {	//FIFO wasn't enabeled. Do it.
-			PINFO("Enableing FIFO.\n");
-			ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-			ctrl |= ME6000_AO_CTRL_BIT_ENABLE_FIFO;
-		} else {	//Check if FIFO is empty
-			if (status & ME6000_AO_STATUS_BIT_EF) {	//FIFO not empty
-				PINFO("Reseting FIFO.\n");
-				ctrl &=
-				    ~(ME6000_AO_CTRL_BIT_ENABLE_FIFO |
-				      ME6000_AO_CTRL_BIT_ENABLE_IRQ);
-				outl(ctrl, instance->ctrl_reg);
-				PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->ctrl_reg -
-					   instance->reg_base, ctrl);
-
-				ctrl |= ME6000_AO_CTRL_BIT_ENABLE_FIFO;
-			} else {	//FIFO empty, only interrupt needs to be disabled!
-				ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-			}
-		}
-
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-
-		//Reset interrupt latch
-		inl(instance->irq_reset_reg);
-
-		//Write output - 1 value to FIFO
-		if (instance->ao_idx & 0x1) {
-			outl(value <<= 16, instance->fifo_reg);
-			PDEBUG_REG("fifo_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->fifo_reg - instance->reg_base,
-				   value <<= 16);
-		} else {
-			outl(value, instance->fifo_reg);
-			PDEBUG_REG("fifo_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->fifo_reg - instance->reg_base,
-				   value);
-		}
-		/// Workaround for mix-mode - end
-	} else {		//No FIFO - always in single mode
-		//Write value
-		PDEBUG("Write value\n");
-		outl(value, instance->single_reg);
-		PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->single_reg - instance->reg_base, value);
-	}
-
-	mode = *instance->preload_flags >> instance->ao_idx;
-	mode &= (ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG);
-
-	PINFO("Triggering mode: 0x%08x\n", mode);
-
-	spin_lock(instance->preload_reg_lock);
-	sync_mask = inl(instance->preload_reg);
-	PDEBUG_REG("preload_reg inl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, sync_mask);
-	switch (mode) {
-	case 0:		//0x00000000: Individual software
-		ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG;
-
-		if (instance->fifo & ME6000_AO_HAS_FIFO) {	// FIFO - Continous mode
-			ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG;
-			if ((sync_mask & ((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != 0x0) {	//Now we can set correct mode.
-				sync_mask &=
-				    ~((ME6000_AO_SYNC_EXT_TRIG |
-				       ME6000_AO_SYNC_HOLD) << instance->
-				      ao_idx);
-
-				outl(sync_mask, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     sync_mask);
-			}
-		} else {	// No FIFO - Single mode: In this case resetting 'ME6000_AO_SYNC_HOLD' will trigger output.
-			if ((sync_mask & ((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != ME6000_AO_SYNC_HOLD) {	//Now we can set correct mode. This is exception. It is set to synchronous and triggered later.
-				sync_mask &=
-				    ~(ME6000_AO_SYNC_EXT_TRIG << instance->
-				      ao_idx);
-				sync_mask |=
-				    ME6000_AO_SYNC_HOLD << instance->ao_idx;
-
-				outl(sync_mask, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     sync_mask);
-			}
-		}
-		instance->single_value = value;
-		break;
-
-	case ME6000_AO_SYNC_EXT_TRIG:	//0x00010000: Individual hardware
-		PDEBUG("DIGITAL TRIGGER\n");
-		ctrl |= ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG;
-
-		if (instance->fifo & ME6000_AO_HAS_FIFO) {	// FIFO - Continous mode
-			if ((sync_mask & ((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) << instance->ao_idx)) != 0x0) {	//Now we can set correct mode.
-				sync_mask &=
-				    ~((ME6000_AO_SYNC_EXT_TRIG |
-				       ME6000_AO_SYNC_HOLD) << instance->
-				      ao_idx);
-
-				outl(sync_mask, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     sync_mask);
-			}
-		} else {	// No FIFO - Single mode
-			if ((sync_mask &
-			     ((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) <<
-			      instance->ao_idx)) != ME6000_AO_SYNC_HOLD) {
-				//Now we can set correct mode
-				sync_mask &=
-				    ~(ME6000_AO_SYNC_EXT_TRIG << instance->
-				      ao_idx);
-				sync_mask |=
-				    ME6000_AO_SYNC_HOLD << instance->ao_idx;
-
-				outl(sync_mask, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     sync_mask);
-			}
-		}
-		break;
-
-	case ME6000_AO_SYNC_HOLD:	//0x00000001: Synchronous software
-		ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG;
-
-		if ((sync_mask &
-		     ((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) <<
-		      instance->ao_idx)) !=
-		    (ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG)) {
-			//Now we can set correct mode
-			sync_mask |=
-			    ME6000_AO_SYNC_EXT_TRIG << instance->ao_idx;
-			sync_mask |= ME6000_AO_SYNC_HOLD << instance->ao_idx;
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-		}
-		//Set triggering flag
-		*instance->triggering_flags |= 0x1 << instance->ao_idx;
-		break;
-
-	case (ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG):	//0x00010001: Synchronous hardware
-		PDEBUG("DIGITAL TRIGGER\n");
-		ctrl |= ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG;
-
-		if ((sync_mask &
-		     ((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) <<
-		      instance->ao_idx)) !=
-		    (ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG)) {
-			//Now we can set correct mode
-			sync_mask |=
-			    (ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) <<
-			    instance->ao_idx;
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-		}
-		//Set triggering flag
-		*instance->triggering_flags |= 0x1 << instance->ao_idx;
-		break;
-	}
-//              spin_unlock(instance->preload_reg_lock);        // Moved down.
-
-	if (instance->fifo) {	//Activate ISM (remove 'stop' bits)
-		ctrl &=
-		    ~(ME6000_AO_CTRL_BIT_EX_TRIG_EDGE |
-		      ME6000_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH);
-		ctrl |= instance->ctrl_trg;
-		ctrl &=
-		    ~(ME6000_AO_CTRL_BIT_STOP |
-		      ME6000_AO_CTRL_BIT_IMMEDIATE_STOP);
-
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-	}
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-/// @note When flag 'ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS' is set than output is triggered. ALWAYS!
-
-	PINFO("<%s> start mode= 0x%08x %s\n", __func__, mode,
-	      (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) ? "SYNCHRONOUS" :
-	      "");
-	if (instance->fifo & ME6000_AO_HAS_FIFO) {	// FIFO - Continous mode
-		if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {	//Trigger outputs
-			//Add channel to start list
-			outl(sync_mask |
-			     (ME6000_AO_SYNC_HOLD << instance->ao_idx),
-			     instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask | (ME6000_AO_SYNC_HOLD <<
-						instance->ao_idx));
-
-			//Fire
-			PINFO
-			    ("Fired all software synchronous outputs by software trigger.\n");
-			outl(0x8000, instance->single_reg);
-			PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->single_reg - instance->reg_base,
-				   0x8000);
-
-			//Restore save settings
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-
-		} else if (!mode) {	//Trigger outputs
-/*			//Remove channel from start list
-			outl(sync_mask & ~(ME6000_AO_SYNC_HOLD << instance->ao_idx), instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base, instance->preload_reg - instance->reg_base, sync_mask & ~(ME6000_AO_SYNC_HOLD << instance->ao_idx));
-*/
-			//Fire
-			PINFO("Software trigger.\n");
-			outl(0x8000, instance->single_reg);
-			PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->single_reg - instance->reg_base,
-				   0x8000);
-
-/*			//Restore save settings
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base, instance->preload_reg - instance->reg_base, sync_mask);
-*/
-		}
-/// @note This is mix-mode case. For now I do not have possibility to trigger first 4 channels (continous mode) and other (single) ones at once.
-/// @note Because triggering is not working it can not be add to synchronous list. First 4 channels don't need this information, anyway.
-		*instance->triggering_flags &= 0xFFFFFFF0;
-	} else {		// No FIFO - Single mode
-		if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {	//Fired all software synchronous outputs.
-			tmp = ~(*instance->preload_flags | 0xFFFF0000);
-			PINFO
-			    ("Fired all software synchronous outputs. mask:0x%08x\n",
-			     tmp);
-			tmp |= sync_mask & 0xFFFF0000;
-			// Add this channel to list
-			tmp &= ~(ME6000_AO_SYNC_HOLD << instance->ao_idx);
-
-			//Fire
-			PINFO("Software trigger.\n");
-			outl(tmp, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   tmp);
-
-			//Restore save settings
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-
-			//Set all as triggered.
-			*instance->triggering_flags = 0x0;
-		} else if (!mode) {	// Add this channel to list
-			outl(sync_mask &
-			     ~(ME6000_AO_SYNC_HOLD << instance->ao_idx),
-			     instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask & ~(ME6000_AO_SYNC_HOLD <<
-						 instance->ao_idx));
-
-			//Fire
-			PINFO("Software trigger.\n");
-
-			//Restore save settings
-			outl(sync_mask, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   sync_mask);
-
-			//Set all as triggered.
-			*instance->triggering_flags = 0x0;
-		}
-
-	}
-	spin_unlock(instance->preload_reg_lock);
-
-	instance->status = ao_status_single_run_wait;
-
-	instance->timeout.delay = delay;
-	instance->timeout.start_time = jiffies;
-	instance->ao_control_task_flag = 1;
-	queue_delayed_work(instance->me6000_workqueue,
-			   &instance->ao_control_task, 1);
-
-	if (!(flags & ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING)) {
-		j = jiffies;
-
-		//Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ao_status_single_run_wait),
-						 (delay) ? delay +
-						 1 : LONG_MAX);
-
-		if (instance->status != ao_status_single_end) {
-			PDEBUG("Single canceled.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			instance->ao_control_task_flag = 0;
-			cancel_delayed_work(&instance->ao_control_task);
-			ao_stop_immediately(instance);
-			instance->status = ao_status_none;
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		if ((delay) && ((jiffies - j) >= delay)) {
-			if (instance->status == ao_status_single_end) {
-				PDEBUG("Timeout reached.\n");
-			} else if ((jiffies - j) > delay) {
-				PERROR
-				    ("Timeout reached. Not handled by control task!\n");
-				ao_stop_immediately(instance);
-			} else {
-				PERROR
-				    ("Timeout reached. Signal come but status is strange: %d\n",
-				     instance->status);
-				ao_stop_immediately(instance);
-			}
-
-			instance->ao_control_task_flag = 0;
-			cancel_delayed_work(&instance->ao_control_task);
-			instance->status = ao_status_single_end;
-			err = ME_ERRNO_TIMEOUT;
-		}
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_ao_io_stream_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      meIOStreamConfig_t *config_list,
-				      int count,
-				      meIOStreamTrigger_t *trigger,
-				      int fifo_irq_threshold, int flags)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t ctrl;
-	unsigned long cpu_flags;
-	uint64_t conv_ticks;
-	unsigned int conv_start_ticks_low = trigger->iConvStartTicksLow;
-	unsigned int conv_start_ticks_high = trigger->iConvStartTicksHigh;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	conv_ticks =
-	    (uint64_t) conv_start_ticks_low +
-	    ((uint64_t) conv_start_ticks_high << 32);
-
-	if (flags &
-	    ~(ME_IO_STREAM_CONFIG_HARDWARE_ONLY |
-	      ME_IO_STREAM_CONFIG_WRAPAROUND)) {
-		PERROR("Invalid flags.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (flags & ME_IO_STREAM_CONFIG_HARDWARE_ONLY) {
-		if (!(flags & ME_IO_STREAM_CONFIG_WRAPAROUND)) {
-			PERROR
-			    ("Hardware ME_IO_STREAM_CONFIG_HARDWARE_ONLY has to be with ME_IO_STREAM_CONFIG_WRAPAROUND.\n");
-			return ME_ERRNO_INVALID_FLAGS;
-		}
-
-		if ((trigger->iAcqStopTrigType != ME_TRIG_TYPE_NONE)
-		    || (trigger->iScanStopTrigType != ME_TRIG_TYPE_NONE)) {
-			PERROR
-			    ("Hardware wraparound mode must be in infinite mode.\n");
-			return ME_ERRNO_INVALID_FLAGS;
-		}
-	}
-
-	if (count != 1) {
-		PERROR("Only 1 entry in config list acceptable.\n");
-		return ME_ERRNO_INVALID_CONFIG_LIST_COUNT;
-	}
-
-	if (config_list[0].iChannel != 0) {
-		PERROR("Invalid channel number specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (config_list[0].iStreamConfig != 0) {
-		PERROR("Only one range available.\n");
-		return ME_ERRNO_INVALID_STREAM_CONFIG;
-	}
-
-	if (config_list[0].iRef != ME_REF_AO_GROUND) {
-		PERROR("Output is referenced to ground.\n");
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	if ((trigger->iAcqStartTicksLow != 0)
-	    || (trigger->iAcqStartTicksHigh != 0)) {
-		PERROR
-		    ("Invalid acquisition start trigger argument specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_ARG;
-	}
-
-	if (config_list[0].iFlags) {
-		PERROR("Invalid config list flag.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((trigger->iAcqStartTrigType != ME_TRIG_TYPE_SW)
-	    && (trigger->iAcqStartTrigType != ME_TRIG_TYPE_EXT_DIGITAL)) {
-		PERROR("Invalid acquisition start trigger type specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_TRIG_TYPE;
-	}
-
-	if (trigger->iAcqStartTrigType == ME_TRIG_TYPE_EXT_DIGITAL) {
-		switch (trigger->iAcqStartTrigEdge) {
-		case ME_TRIG_EDGE_RISING:
-		case ME_TRIG_EDGE_FALLING:
-		case ME_TRIG_EDGE_ANY:
-			break;
-
-		default:
-			PERROR
-			    ("Invalid acquisition start trigger edge specified.\n");
-			return ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE;
-		}
-	}
-
-	if ((trigger->iAcqStartTrigType == ME_TRIG_TYPE_SW)
-	    && (trigger->iAcqStartTrigEdge != ME_TRIG_TYPE_NONE)) {
-		PERROR("Invalid acquisition start trigger edge specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE;
-	}
-
-	if (trigger->iScanStartTrigType != ME_TRIG_TYPE_FOLLOW) {
-		PERROR("Invalid scan start trigger type specified.\n");
-		return ME_ERRNO_INVALID_SCAN_START_TRIG_TYPE;
-	}
-
-	if (trigger->iConvStartTrigType != ME_TRIG_TYPE_TIMER) {
-		PERROR("Invalid conv start trigger type specified.\n");
-		return ME_ERRNO_INVALID_CONV_START_TRIG_TYPE;
-	}
-
-	if ((conv_ticks < ME6000_AO_MIN_CHAN_TICKS)
-	    || (conv_ticks > ME6000_AO_MAX_CHAN_TICKS)) {
-		PERROR("Invalid conv start trigger argument specified.\n");
-		return ME_ERRNO_INVALID_CONV_START_ARG;
-	}
-
-	if (trigger->iAcqStartTicksLow || trigger->iAcqStartTicksHigh) {
-		PERROR("Invalid acq start trigger argument specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_ARG;
-	}
-
-	if (trigger->iScanStartTicksLow || trigger->iScanStartTicksHigh) {
-		PERROR("Invalid scan start trigger argument specified.\n");
-		return ME_ERRNO_INVALID_SCAN_START_ARG;
-	}
-
-	switch (trigger->iScanStopTrigType) {
-	case ME_TRIG_TYPE_NONE:
-		if (trigger->iScanStopCount != 0) {
-			PERROR("Invalid scan stop count specified.\n");
-			return ME_ERRNO_INVALID_SCAN_STOP_ARG;
-		}
-		break;
-
-	case ME_TRIG_TYPE_COUNT:
-		if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {
-			if (trigger->iScanStopCount <= 0) {
-				PERROR("Invalid scan stop count specified.\n");
-				return ME_ERRNO_INVALID_SCAN_STOP_ARG;
-			}
-		} else {
-			PERROR("The continous mode has not 'scan' contects.\n");
-			return ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-		}
-		break;
-
-	default:
-		PERROR("Invalid scan stop trigger type specified.\n");
-		return ME_ERRNO_INVALID_SCAN_STOP_TRIG_TYPE;
-	}
-
-	switch (trigger->iAcqStopTrigType) {
-	case ME_TRIG_TYPE_NONE:
-		if (trigger->iAcqStopCount != 0) {
-			PERROR("Invalid acq stop count specified.\n");
-			return ME_ERRNO_INVALID_ACQ_STOP_ARG;
-		}
-		break;
-
-	case ME_TRIG_TYPE_COUNT:
-		if (trigger->iScanStopTrigType != ME_TRIG_TYPE_NONE) {
-			PERROR("Invalid acq stop trigger type specified.\n");
-			return ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-		}
-
-		if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {
-			if (trigger->iAcqStopCount <= 0) {
-				PERROR
-				    ("The continous mode has not 'scan' contects.\n");
-				return ME_ERRNO_INVALID_ACQ_STOP_ARG;
-			}
-		}
-//                      else
-//                      {
-//                              PERROR("Invalid acq stop trigger type specified.\n");
-//                              return ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-//                      }
-
-		break;
-
-	default:
-		PERROR("Invalid acq stop trigger type specified.\n");
-		return ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE;
-	}
-
-	switch (trigger->iAcqStartTrigChan) {
-	case ME_TRIG_CHAN_DEFAULT:
-	case ME_TRIG_CHAN_SYNCHRONOUS:
-		break;
-
-	default:
-		PERROR("Invalid acq start trigger channel specified.\n");
-		return ME_ERRNO_INVALID_ACQ_START_TRIG_CHAN;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	//Stop device
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-
-	//Check if state machine is stopped.
-	err = ao_stop_immediately(instance);
-	if (err) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	//Reset control register. Block all actions. Disable IRQ. Disable FIFO.
-	ctrl = ME6000_AO_CTRL_BIT_IMMEDIATE_STOP | ME6000_AO_CTRL_BIT_STOP;
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-
-	//Reset interrupt latch
-	inl(instance->irq_reset_reg);
-
-	//This is paranoic, but to be sure.
-	instance->preloaded_count = 0;
-	instance->data_count = 0;
-	instance->circ_buf.head = 0;
-	instance->circ_buf.tail = 0;
-
-	/* Set mode. */
-	if (flags & ME_IO_STREAM_CONFIG_WRAPAROUND) {	//Wraparound
-		if (flags & ME_IO_STREAM_CONFIG_HARDWARE_ONLY) {	//Hardware wraparound
-			PINFO("Hardware wraparound.\n");
-			ctrl |= ME6000_AO_MODE_WRAPAROUND;
-			instance->mode = ME6000_AO_HW_WRAP_MODE;
-		} else {	//Software wraparound
-			PINFO("Software wraparound.\n");
-			ctrl |= ME6000_AO_MODE_CONTINUOUS;
-			instance->mode = ME6000_AO_SW_WRAP_MODE;
-		}
-	} else {		//Continous
-		PINFO("Continous.\n");
-		ctrl |= ME6000_AO_MODE_CONTINUOUS;
-		instance->mode = ME6000_AO_CONTINOUS;
-	}
-
-	//Set the trigger edge.
-	if (trigger->iAcqStartTrigType == ME_TRIG_TYPE_EXT_DIGITAL) {	//Set the trigger type and edge for external trigger.
-		PINFO("External digital trigger.\n");
-		instance->start_mode = ME6000_AO_EXT_TRIG;
-
-		switch (trigger->iAcqStartTrigEdge) {
-		case ME_TRIG_EDGE_RISING:
-			PINFO("Set the trigger edge: rising.\n");
-			instance->ctrl_trg = 0x0;
-			break;
-
-		case ME_TRIG_EDGE_FALLING:
-			PINFO("Set the trigger edge: falling.\n");
-//                                      ctrl |= ME6000_AO_CTRL_BIT_EX_TRIG_EDGE;
-			instance->ctrl_trg = ME6000_AO_CTRL_BIT_EX_TRIG_EDGE;
-			break;
-
-		case ME_TRIG_EDGE_ANY:
-			PINFO("Set the trigger edge: both edges.\n");
-//                                      ctrl |= ME6000_AO_CTRL_BIT_EX_TRIG_EDGE | ME6000_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-			instance->ctrl_trg =
-			    ME6000_AO_CTRL_BIT_EX_TRIG_EDGE |
-			    ME6000_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH;
-			break;
-		}
-	} else {
-		PINFO("Internal software trigger.\n");
-		instance->start_mode = 0;
-	}
-
-	//Set the stop mode and value.
-	if (trigger->iAcqStopTrigType == ME_TRIG_TYPE_COUNT) {	//Amount of data
-		instance->stop_mode = ME6000_AO_ACQ_STOP_MODE;
-		instance->stop_count = trigger->iAcqStopCount;
-	} else if (trigger->iScanStopTrigType == ME_TRIG_TYPE_COUNT) {	//Amount of 'scans'
-		instance->stop_mode = ME6000_AO_SCAN_STOP_MODE;
-		instance->stop_count = trigger->iScanStopCount;
-	} else {		//Infinite
-		instance->stop_mode = ME6000_AO_INF_STOP_MODE;
-		instance->stop_count = 0;
-	}
-
-	PINFO("Stop count: %d.\n", instance->stop_count);
-
-	if (trigger->iAcqStartTrigChan == ME_TRIG_CHAN_SYNCHRONOUS) {	//Synchronous start
-		instance->start_mode |= ME6000_AO_SYNC_HOLD;
-		if (trigger->iAcqStartTrigType == ME_TRIG_TYPE_EXT_DIGITAL) {	//Externaly triggered
-			PINFO("Synchronous start. Externaly trigger active.\n");
-			instance->start_mode |= ME6000_AO_SYNC_EXT_TRIG;
-		}
-#ifdef MEDEBUG_INFO
-		else {
-			PINFO
-			    ("Synchronous start. Externaly trigger dissabled.\n");
-		}
-#endif
-
-	}
-	//Set speed
-	outl(conv_ticks - 2, instance->timer_reg);
-	PDEBUG_REG("timer_reg outl(0x%lX+0x%lX)=0x%llx\n", instance->reg_base,
-		   instance->timer_reg - instance->reg_base, conv_ticks - 2);
-	instance->hardware_stop_delay = (int)(conv_ticks * HZ) / ME6000_AO_BASE_FREQUENCY;	//<== MUST be with cast!
-
-	// Write the control word
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-
-	//Set status.
-	instance->status = ao_status_stream_configured;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_ao_io_stream_new_values(me_subdevice_t *subdevice,
-					  struct file *filep,
-					  int time_out, int *count, int flags)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	long t = 0;
-	long j;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!instance->circ_buf.buf) {
-		PERROR("Circular buffer not exists.\n");
-		return ME_ERRNO_INTERNAL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (me_circ_buf_space(&instance->circ_buf)) {	//The buffer is NOT full.
-		*count = me_circ_buf_space(&instance->circ_buf);
-	} else {		//The buffer is full.
-		if (time_out) {
-			t = (time_out * HZ) / 1000;
-
-			if (t == 0)
-				t = 1;
-		} else {	//Max time.
-			t = LONG_MAX;
-		}
-
-		*count = 0;
-
-		j = jiffies;
-
-		//Only runing process will interrupt this call. Interrupts are when FIFO HF is signaled.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 ((me_circ_buf_space
-						   (&instance->circ_buf))
-						  || !(inl(instance->status_reg)
-						       &
-						       ME6000_AO_STATUS_BIT_FSM)),
-						 t);
-
-		if (!(inl(instance->status_reg) & ME6000_AO_STATUS_BIT_FSM)) {
-			PERROR("AO subdevice is not running.\n");
-			err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-		} else if (signal_pending(current)) {
-			PERROR("Wait on values interrupted from signal.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		} else if ((jiffies - j) >= t) {
-			PERROR("Wait on values timed out.\n");
-			err = ME_ERRNO_TIMEOUT;
-		} else {	//Uff... all is good. Inform user about empty space.
-			*count = me_circ_buf_space(&instance->circ_buf);
-		}
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_ao_io_stream_start(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int start_mode, int time_out, int flags)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long cpu_flags = 0;
-	uint32_t status;
-	uint32_t ctrl;
-	uint32_t synch;
-	int count = 0;
-	int circ_buffer_count;
-
-	unsigned long ref;
-	unsigned long delay = 0;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (flags & ~ME_IO_STREAM_START_TYPE_TRIG_SYNCHRONOUS) {
-		PERROR("Invalid flags.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid timeout specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if ((start_mode != ME_START_MODE_BLOCKING)
-	    && (start_mode != ME_START_MODE_NONBLOCKING)) {
-		PERROR("Invalid start mode specified.\n");
-		return ME_ERRNO_INVALID_START_MODE;
-	}
-
-	if (time_out) {
-		delay = (time_out * HZ) / 1000;
-		if (delay == 0)
-			delay = 1;
-	}
-
-	switch (instance->status) {	//Checking actual mode.
-	case ao_status_stream_configured:
-	case ao_status_stream_end:
-		//Correct modes!
-		break;
-
-		//The device is in wrong mode.
-	case ao_status_none:
-	case ao_status_single_configured:
-	case ao_status_single_run_wait:
-	case ao_status_single_run:
-	case ao_status_single_end_wait:
-		PERROR
-		    ("Subdevice must be preinitialize correctly for streaming.\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-
-	case ao_status_stream_fifo_error:
-	case ao_status_stream_buffer_error:
-	case ao_status_stream_error:
-		PDEBUG("Before restart broke stream 'STOP' must be caled.\n");
-		return ME_STATUS_ERROR;
-
-	case ao_status_stream_run_wait:
-	case ao_status_stream_run:
-	case ao_status_stream_end_wait:
-		PDEBUG("Stream is already working.\n");
-		return ME_ERRNO_SUBDEVICE_BUSY;
-
-	default:
-		instance->status = ao_status_stream_error;
-		PERROR_CRITICAL("Status is in wrong state!\n");
-		return ME_ERRNO_INTERNAL;
-
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (instance->mode == ME6000_AO_CONTINOUS) {	//Continous
-		instance->circ_buf.tail += instance->preloaded_count;
-		instance->circ_buf.tail &= instance->circ_buf.mask;
-	}
-	circ_buffer_count = me_circ_buf_values(&instance->circ_buf);
-
-	if (!circ_buffer_count && !instance->preloaded_count) {	//No values in buffer
-		ME_SUBDEVICE_EXIT;
-		PERROR("No values in buffer!\n");
-		return ME_ERRNO_LACK_OF_RESOURCES;
-	}
-
-	//Cancel control task
-	PDEBUG("Cancel control task. idx=%d\n", instance->ao_idx);
-	instance->ao_control_task_flag = 0;
-	cancel_delayed_work(&instance->ao_control_task);
-
-	//Stop device
-	err = ao_stop_immediately(instance);
-	if (err) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		ME_SUBDEVICE_EXIT;
-
-		return ME_ERRNO_SUBDEVICE_BUSY;
-	}
-	//Set values for single_read()
-	instance->single_value = ME6000_AO_MAX_DATA + 1;
-	instance->single_value_in_fifo = ME6000_AO_MAX_DATA + 1;
-
-	//Setting stop points
-	if (instance->stop_mode == ME6000_AO_SCAN_STOP_MODE) {
-		instance->stop_data_count =
-		    instance->stop_count * circ_buffer_count;
-	} else {
-		instance->stop_data_count = instance->stop_count;
-	}
-
-	if ((instance->stop_data_count != 0)
-	    && (instance->stop_data_count < circ_buffer_count)) {
-		PERROR("More data in buffer than previously set limit!\n");
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	ctrl = inl(instance->ctrl_reg);
-	//Check FIFO
-	if (!(ctrl & ME6000_AO_CTRL_BIT_ENABLE_FIFO)) {	//FIFO wasn't enabeled. Do it. <= This should be done by user call with ME_WRITE_MODE_PRELOAD
-		PINFO("Enableing FIFO.\n");
-		ctrl |= ME6000_AO_CTRL_BIT_ENABLE_FIFO;
-		ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-
-		instance->preloaded_count = 0;
-		instance->data_count = 0;
-	} else {		//Block IRQ
-		ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-	}
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-
-	//Reset interrupt latch
-	inl(instance->irq_reset_reg);
-
-	//Fill FIFO <= Generaly this should be done by user pre-load call but this is second place to do it.
-	status = inl(instance->status_reg);
-	if (!(status & ME6000_AO_STATUS_BIT_EF)) {	//FIFO empty
-		if (instance->stop_data_count != 0) {
-			count = ME6000_AO_FIFO_COUNT;
-		} else {
-			count =
-			    (ME6000_AO_FIFO_COUNT <
-			     instance->
-			     stop_data_count) ? ME6000_AO_FIFO_COUNT :
-			    instance->stop_data_count;
-		}
-
-		//Copy data
-		count =
-		    ao_write_data(instance, count, instance->preloaded_count);
-
-		if (count < 0) {	//This should never happend!
-			PERROR_CRITICAL("COPY FINISH WITH ERROR!\n");
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INTERNAL;
-		}
-	}
-	//Set pre-load features.
-	spin_lock(instance->preload_reg_lock);
-	synch = inl(instance->preload_reg);
-	synch &=
-	    ~((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) << instance->
-	      ao_idx);
-	synch |=
-	    (instance->start_mode & ~ME6000_AO_EXT_TRIG) << instance->ao_idx;
-	outl(synch, instance->preload_reg);
-	PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->preload_reg - instance->reg_base, synch);
-	spin_unlock(instance->preload_reg_lock);
-
-	//Default count is '0'
-	if (instance->mode == ME6000_AO_CONTINOUS) {	//Continous
-		instance->preloaded_count = 0;
-		instance->circ_buf.tail += count;
-		instance->circ_buf.tail &= instance->circ_buf.mask;
-	} else {		//Wraparound
-		instance->preloaded_count += count;
-		instance->data_count += count;
-
-		//Special case: Infinite wraparound with less than FIFO datas always should runs in hardware mode.
-		if ((instance->stop_mode == ME6000_AO_INF_STOP_MODE)
-		    && (circ_buffer_count <= ME6000_AO_FIFO_COUNT)) {	//Change to hardware wraparound
-			PDEBUG
-			    ("Changeing mode from software wraparound to hardware wraparound.\n");
-			//Copy all data
-			count =
-			    ao_write_data(instance, circ_buffer_count,
-					  instance->preloaded_count);
-			ctrl &= ~ME6000_AO_CTRL_MODE_MASK;
-			ctrl |= ME6000_AO_MODE_WRAPAROUND;
-		}
-
-		if (instance->preloaded_count == me_circ_buf_values(&instance->circ_buf)) {	//Reset position indicator.
-			instance->preloaded_count = 0;
-		} else if (instance->preloaded_count > me_circ_buf_values(&instance->circ_buf)) {	//This should never happend!
-			PERROR_CRITICAL
-			    ("PRELOADED MORE VALUES THAN ARE IN BUFFER!\n");
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INTERNAL;
-		}
-	}
-
-	//Set status to 'wait for start'
-	instance->status = ao_status_stream_run_wait;
-
-	status = inl(instance->status_reg);
-	//Start state machine and interrupts
-	PINFO("<%s:%d> Start state machine.\n", __func__, __LINE__);
-	ctrl &= ~(ME6000_AO_CTRL_BIT_STOP | ME6000_AO_CTRL_BIT_IMMEDIATE_STOP);
-	if (instance->start_mode == ME6000_AO_EXT_TRIG) {
-		PDEBUG("DIGITAL TRIGGER\n");
-		ctrl |= ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG;
-	}
-	if (!(status & ME6000_AO_STATUS_BIT_HF)) {	//More than half!
-		if ((ctrl & ME6000_AO_CTRL_MODE_MASK) == ME6000_AO_MODE_CONTINUOUS) {	//Enable IRQ only when hardware_continous is set and FIFO is more than half
-			PINFO("<%s:%d> Start interrupts.\n", __func__,
-			      __LINE__);
-			ctrl |= ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-		}
-	}
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	//Trigger output
-	PINFO("<%s> start mode= 0x%x %s\n", __func__, instance->start_mode,
-	      (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) ? "SYNCHRONOUS" :
-	      "");
-	if (flags & ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS) {	//Trigger outputs
-		spin_lock(instance->preload_reg_lock);
-		synch = inl(instance->preload_reg);
-		//Add channel to start list
-		outl(synch | (ME6000_AO_SYNC_HOLD << instance->ao_idx),
-		     instance->preload_reg);
-		PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->preload_reg - instance->reg_base,
-			   synch | (ME6000_AO_SYNC_HOLD << instance->ao_idx));
-
-		//Fire
-		PINFO
-		    ("Fired all software synchronous outputs by software trigger.\n");
-		outl(0x8000, instance->single_reg);
-		PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->single_reg - instance->reg_base, 0x8000);
-
-		//Restore save settings
-		outl(synch, instance->preload_reg);
-		PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->preload_reg - instance->reg_base, synch);
-		spin_unlock(instance->preload_reg_lock);
-	} else if (!instance->start_mode) {	//Trigger outputs
-/*
-		spin_lock(instance->preload_reg_lock);
-			synch = inl(instance->preload_reg);
-			//Remove channel from start list
-			outl(synch & ~(ME6000_AO_SYNC_HOLD << instance->ao_idx), instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base, instance->preload_reg - instance->reg_base, synch & ~(ME6000_AO_SYNC_HOLD << instance->ao_idx));
-*/
-		//Fire
-		PINFO("Software trigger.\n");
-		outl(0x8000, instance->single_reg);
-		PDEBUG_REG("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->single_reg - instance->reg_base, 0x8000);
-
-/*
-			//Restore save settings
-			outl(synch, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base, instance->preload_reg - instance->reg_base, synch);
-		spin_unlock(instance->preload_reg_lock);
-*/
-	}
-	// Set control task's timeout
-	instance->timeout.delay = delay;
-	instance->timeout.start_time = jiffies;
-
-	if (status & ME6000_AO_STATUS_BIT_HF) {	//Less than half but not empty!
-		PINFO("Less than half.\n");
-		if (instance->stop_data_count == 0) {
-			count = ME6000_AO_FIFO_COUNT / 2;
-		} else {
-			count =
-			    ((ME6000_AO_FIFO_COUNT / 2) <
-			     instance->stop_data_count) ? ME6000_AO_FIFO_COUNT /
-			    2 : instance->stop_data_count;
-		}
-
-		//Copy data
-		count =
-		    ao_write_data(instance, count, instance->preloaded_count);
-
-		if (count < 0) {	//This should never happend!
-			PERROR_CRITICAL("COPY FINISH WITH ERROR!\n");
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INTERNAL;
-		}
-
-		if (instance->mode == ME6000_AO_CONTINOUS) {	//Continous
-			instance->circ_buf.tail += count;
-			instance->circ_buf.tail &= instance->circ_buf.mask;
-		} else {	//Wraparound
-			instance->data_count += count;
-			instance->preloaded_count += count;
-
-			if (instance->preloaded_count == me_circ_buf_values(&instance->circ_buf)) {	//Reset position indicator.
-				instance->preloaded_count = 0;
-			} else if (instance->preloaded_count > me_circ_buf_values(&instance->circ_buf)) {	//This should never happend!
-				PERROR_CRITICAL
-				    ("PRELOADED MORE VALUES THAN ARE IN BUFFER!\n");
-				ME_SUBDEVICE_EXIT;
-				return ME_ERRNO_INTERNAL;
-			}
-		}
-
-		status = inl(instance->status_reg);
-		if (!(status & ME6000_AO_STATUS_BIT_HF)) {	//More than half!
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			PINFO("<%s:%d> Start interrupts.\n", __func__,
-			      __LINE__);
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |= ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-		}
-	}
-	//Special case: Limited wraparound with less than HALF FIFO datas need work around to generate first interrupt.
-	if ((instance->stop_mode != ME6000_AO_INF_STOP_MODE)
-	    && (instance->mode == ME6000_AO_SW_WRAP_MODE)
-	    && (circ_buffer_count <= (ME6000_AO_FIFO_COUNT / 2))) {	//Put more data to FIFO
-		PINFO("Limited wraparound with less than HALF FIFO datas.\n");
-		if (instance->preloaded_count) {	//This should never happend!
-			PERROR_CRITICAL
-			    ("ERROR WHEN LOADING VALUES FOR WRAPAROUND!\n");
-			ME_SUBDEVICE_EXIT;
-			return ME_ERRNO_INTERNAL;
-		}
-
-		while (instance->stop_data_count > instance->data_count) {	//Maximum data not set jet.
-			//Copy to buffer
-			if (circ_buffer_count != ao_write_data(instance, circ_buffer_count, 0)) {	//This should never happend!
-				PERROR_CRITICAL
-				    ("ERROR WHEN LOADING VALUES FOR WRAPAROUND!\n");
-				ME_SUBDEVICE_EXIT;
-				return ME_ERRNO_INTERNAL;
-			}
-			instance->data_count += circ_buffer_count;
-
-			if (!((status = inl(instance->status_reg)) & ME6000_AO_STATUS_BIT_HF)) {	//FIFO is more than half. Enable IRQ and end copy.
-				//Reset interrupt latch
-				inl(instance->irq_reset_reg);
-
-				spin_lock_irqsave(&instance->subdevice_lock,
-						  cpu_flags);
-				PINFO("<%s:%d> Start interrupts.\n",
-				      __func__, __LINE__);
-				ctrl = inl(instance->ctrl_reg);
-				ctrl |= ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-				outl(ctrl, instance->ctrl_reg);
-				PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->ctrl_reg -
-					   instance->reg_base, ctrl);
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-				break;
-			}
-		}
-	}
-	// Schedule control task
-	instance->ao_control_task_flag = 1;
-	queue_delayed_work(instance->me6000_workqueue,
-			   &instance->ao_control_task, 1);
-
-	if (start_mode == ME_START_MODE_BLOCKING) {	//Wait for start.
-		ref = jiffies;
-		//Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ao_status_stream_run_wait),
-						 (delay) ? delay +
-						 1 : LONG_MAX);
-
-		if ((instance->status != ao_status_stream_run)
-		    && (instance->status != ao_status_stream_end)) {
-			PDEBUG("Starting stream canceled. %d\n",
-			       instance->status);
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait on start of state machine interrupted.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		if ((delay) && ((jiffies - ref) >= delay)) {
-			if (instance->status != ao_status_stream_run) {
-				if (instance->status == ao_status_stream_end) {
-					PDEBUG("Timeout reached.\n");
-				} else if ((jiffies - ref) > delay) {
-					PERROR
-					    ("Timeout reached. Not handled by control task!\n");
-					ao_stop_immediately(instance);
-				} else {
-					PERROR
-					    ("Timeout reached. Signal come but status is strange: %d\n",
-					     instance->status);
-					ao_stop_immediately(instance);
-				}
-
-				instance->ao_control_task_flag = 0;
-				cancel_delayed_work(&instance->ao_control_task);
-				instance->status = ao_status_stream_end;
-				err = ME_ERRNO_TIMEOUT;
-			}
-		}
-	}
-
-	ME_SUBDEVICE_EXIT;
-	return err;
-}
-
-static int me6000_ao_io_stream_status(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int wait,
-				      int *status, int *values, int flags)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((wait != ME_WAIT_NONE) && (wait != ME_WAIT_IDLE)) {
-		PERROR("Invalid wait argument specified.\n");
-		*status = ME_STATUS_INVALID;
-		return ME_ERRNO_INVALID_WAIT;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	switch (instance->status) {
-	case ao_status_single_configured:
-	case ao_status_single_end:
-	case ao_status_stream_configured:
-	case ao_status_stream_end:
-	case ao_status_stream_fifo_error:
-	case ao_status_stream_buffer_error:
-	case ao_status_stream_error:
-		*status = ME_STATUS_IDLE;
-		break;
-
-	case ao_status_single_run_wait:
-	case ao_status_single_run:
-	case ao_status_single_end_wait:
-	case ao_status_stream_run_wait:
-	case ao_status_stream_run:
-	case ao_status_stream_end_wait:
-		*status = ME_STATUS_BUSY;
-		break;
-
-	case ao_status_none:
-	default:
-		*status =
-		    (inl(instance->status_reg) & ME6000_AO_STATUS_BIT_FSM) ?
-		    ME_STATUS_BUSY : ME_STATUS_IDLE;
-		break;
-	}
-
-	if ((wait == ME_WAIT_IDLE) && (*status == ME_STATUS_BUSY)) {
-		//Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 ((instance->status !=
-						   ao_status_single_run_wait)
-						  && (instance->status !=
-						      ao_status_single_run)
-						  && (instance->status !=
-						      ao_status_single_end_wait)
-						  && (instance->status !=
-						      ao_status_stream_run_wait)
-						  && (instance->status !=
-						      ao_status_stream_run)
-						  && (instance->status !=
-						      ao_status_stream_end_wait)),
-						 LONG_MAX);
-
-		if (instance->status != ao_status_stream_end) {
-			PDEBUG("Wait for IDLE canceled. %d\n",
-			       instance->status);
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Wait for IDLE interrupted.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		}
-
-		*status = ME_STATUS_IDLE;
-	}
-
-	*values = me_circ_buf_space(&instance->circ_buf);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_ao_io_stream_stop(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int stop_mode, int flags)
-{				/// @note Stop work and empty buffer and FIFO
-	int err = ME_ERRNO_SUCCESS;
-	me6000_ao_subdevice_t *instance;
-	unsigned long cpu_flags;
-	volatile uint32_t ctrl;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (flags & ~ME_IO_STREAM_STOP_PRESERVE_BUFFERS) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if ((stop_mode != ME_STOP_MODE_IMMEDIATE)
-	    && (stop_mode != ME_STOP_MODE_LAST_VALUE)) {
-		PERROR("Invalid stop mode specified.\n");
-		return ME_ERRNO_INVALID_STOP_MODE;
-	}
-
-	if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (instance->status < ao_status_stream_configured) {
-		//There is nothing to stop!
-		PERROR("Subdevice not in streaming mode. %d\n",
-		       instance->status);
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	//Mark as stopping. => Software stop.
-	instance->status = ao_status_stream_end_wait;
-
-	if (stop_mode == ME_STOP_MODE_IMMEDIATE) {	//Stopped now!
-		err = ao_stop_immediately(instance);
-	} else if (stop_mode == ME_STOP_MODE_LAST_VALUE) {
-		ctrl = inl(instance->ctrl_reg) & ME6000_AO_CTRL_MODE_MASK;
-		if (ctrl == ME6000_AO_MODE_WRAPAROUND) {	//Hardware wraparound => Hardware stop.
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |= ME6000_AO_CTRL_BIT_STOP;
-			ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			//Reset interrupt latch
-			inl(instance->irq_reset_reg);
-		}
-		//Only runing process will interrupt this call. Events are signaled when status change. Extra timeout add for safe reason.
-		wait_event_interruptible_timeout(instance->wait_queue,
-						 (instance->status !=
-						  ao_status_stream_end_wait),
-						 LONG_MAX);
-
-		if (instance->status != ao_status_stream_end) {
-			PDEBUG("Stopping stream canceled.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-
-		if (signal_pending(current)) {
-			PERROR("Stopping stream interrupted.\n");
-			instance->status = ao_status_none;
-			ao_stop_immediately(instance);
-			err = ME_ERRNO_SIGNAL;
-		}
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	ctrl = inl(instance->ctrl_reg);
-	ctrl |= ME6000_AO_CTRL_BIT_STOP | ME6000_AO_CTRL_BIT_IMMEDIATE_STOP;
-	ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-	if (!flags) {		//Reset FIFO
-		ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_FIFO;
-	}
-	outl(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	//Reset interrupt latch
-	inl(instance->irq_reset_reg);
-
-	if (!flags) {		//Reset software buffer
-		instance->circ_buf.head = 0;
-		instance->circ_buf.tail = 0;
-		instance->preloaded_count = 0;
-		instance->data_count = 0;
-	}
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_ao_io_stream_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int write_mode,
-				     int *values, int *count, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me6000_ao_subdevice_t *instance;
-	unsigned long cpu_flags = 0;
-	uint32_t reg_copy;
-
-	int copied_from_user = 0;
-	int left_to_copy_from_user = *count;
-
-	int copied_values;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	//Checking arguments
-	if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {
-		PERROR("Not a streaming ao.\n");
-		return ME_ERRNO_NOT_SUPPORTED;
-	}
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (*count <= 0) {
-		PERROR("Invalid count of values specified.\n");
-		return ME_ERRNO_INVALID_VALUE_COUNT;
-	}
-
-	if (values == NULL) {
-		PERROR("Invalid address of values specified.\n");
-		return ME_ERRNO_INVALID_POINTER;
-	}
-
-	if ((instance->status == ao_status_none) || (instance->status == ao_status_single_configured)) {	//The device is in single mode.
-		PERROR
-		    ("Subdevice must be preinitialize correctly for streaming.\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-	}
-
-	switch (write_mode) {
-	case ME_WRITE_MODE_PRELOAD:
-
-		//Device must be stopped.
-		if ((instance->status != ao_status_stream_configured)
-		    && (instance->status != ao_status_stream_end)) {
-			PERROR
-			    ("Subdevice mustn't be runing when 'pre-load' mode is used.\n");
-			return ME_ERRNO_PREVIOUS_CONFIG;
-		}
-		break;
-	case ME_WRITE_MODE_NONBLOCKING:
-	case ME_WRITE_MODE_BLOCKING:
-		/// @note In blocking mode: When device is not runing and there is not enought space call will blocked up!
-		/// @note Some other thread must empty buffer by strating engine.
-		break;
-
-	default:
-		PERROR("Invalid write mode specified.\n");
-		return ME_ERRNO_INVALID_WRITE_MODE;
-	}
-
-	if (instance->mode & ME6000_AO_WRAP_MODE) {	//Wraparound mode. Device must be stopped.
-		if ((instance->status != ao_status_stream_configured)
-		    && (instance->status != ao_status_stream_end)) {
-			PERROR
-			    ("Subdevice mustn't be runing when 'pre-load' mode is used.\n");
-			return ME_ERRNO_INVALID_WRITE_MODE;
-		}
-	}
-
-	if ((instance->mode == ME6000_AO_HW_WRAP_MODE)
-	    && (write_mode != ME_WRITE_MODE_PRELOAD)) {
-/*
-		PERROR("Only 'pre-load' write is acceptable in hardware wraparound mode.\n");
-		return ME_ERRNO_PREVIOUS_CONFIG;
-*/
-		//This is transparent for user.
-		PDEBUG("Changing write_mode to ME_WRITE_MODE_PRELOAD.\n");
-		write_mode = ME_WRITE_MODE_PRELOAD;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (write_mode == ME_WRITE_MODE_PRELOAD) {	//Init enviroment - preload
-		spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-		reg_copy = inl(instance->ctrl_reg);
-		//Check FIFO
-		if (!(reg_copy & ME6000_AO_CTRL_BIT_ENABLE_FIFO)) {	//FIFO not active. Enable it.
-			reg_copy |= ME6000_AO_CTRL_BIT_ENABLE_FIFO;
-			outl(reg_copy, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   reg_copy);
-			instance->preloaded_count = 0;
-		}
-		spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	}
-
-	while (1) {
-		//Copy to buffer. This step is common for all modes.
-		copied_from_user =
-		    ao_get_data_from_user(instance, left_to_copy_from_user,
-					  values + (*count -
-						    left_to_copy_from_user));
-		left_to_copy_from_user -= copied_from_user;
-
-		reg_copy = inl(instance->status_reg);
-		if ((instance->status == ao_status_stream_run) && !(reg_copy & ME6000_AO_STATUS_BIT_FSM)) {	//BROKEN PIPE! The state machine is stoped but logical status show that should be working.
-			PERROR("Broken pipe in write.\n");
-			err = ME_ERRNO_SUBDEVICE_NOT_RUNNING;
-			break;
-		}
-
-		if ((instance->status == ao_status_stream_run) && (instance->mode == ME6000_AO_CONTINOUS) && (reg_copy & ME6000_AO_STATUS_BIT_HF)) {	//Continous mode runing and data are below half!
-
-			// Block interrupts.
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			reg_copy = inl(instance->ctrl_reg);
-			reg_copy &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(reg_copy, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   reg_copy);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			//Fast copy
-			copied_values =
-			    ao_write_data(instance, ME6000_AO_FIFO_COUNT / 2,
-					  0);
-			if (copied_values > 0) {
-				instance->circ_buf.tail += copied_values;
-				instance->circ_buf.tail &=
-				    instance->circ_buf.mask;
-				continue;
-			}
-			//Reset interrupt latch
-			inl(instance->irq_reset_reg);
-
-			// Activate interrupts.
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			reg_copy = inl(instance->ctrl_reg);
-			reg_copy |= ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-			outl(reg_copy, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   reg_copy);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			if (copied_values == 0) {	//This was checked and never should happend!
-				PERROR_CRITICAL("COPY FINISH WITH 0!\n");
-			}
-
-			if (copied_values < 0) {	//This was checked and never should happend!
-				PERROR_CRITICAL("COPY FINISH WITH ERROR!\n");
-				instance->status = ao_status_stream_fifo_error;
-				err = ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-				break;
-			}
-		}
-
-		if (!left_to_copy_from_user) {	//All datas were copied.
-			break;
-		} else {	//Not all datas were copied.
-			if (instance->mode & ME6000_AO_WRAP_MODE) {	//Error too much datas! Wraparound is limited in size!
-				PERROR
-				    ("Too much data for wraparound mode!  Exceeded size of %ld.\n",
-				     ME6000_AO_CIRC_BUF_COUNT - 1);
-				err = ME_ERRNO_RING_BUFFER_OVERFLOW;
-				break;
-			}
-
-			if (write_mode != ME_WRITE_MODE_BLOCKING) {	//Non blocking calls
-				break;
-			}
-
-			wait_event_interruptible(instance->wait_queue,
-						 me_circ_buf_space(&instance->
-								   circ_buf));
-
-			if (signal_pending(current)) {
-				PERROR("Writing interrupted by signal.\n");
-				instance->status = ao_status_none;
-				ao_stop_immediately(instance);
-				err = ME_ERRNO_SIGNAL;
-				break;
-			}
-
-			if (instance->status == ao_status_none) {	//Reset
-				PERROR("Writing interrupted by reset.\n");
-				err = ME_ERRNO_CANCELLED;
-				break;
-			}
-		}
-	}
-
-	if (write_mode == ME_WRITE_MODE_PRELOAD) {	//Copy data to FIFO - preload
-		copied_values =
-		    ao_write_data_pooling(instance, ME6000_AO_FIFO_COUNT,
-					  instance->preloaded_count);
-		instance->preloaded_count += copied_values;
-		instance->data_count += copied_values;
-
-		if ((instance->mode == ME6000_AO_HW_WRAP_MODE)
-		    && (me_circ_buf_values(&instance->circ_buf) >
-			ME6000_AO_FIFO_COUNT)) {
-			PERROR
-			    ("Too much data for hardware wraparound mode! Exceeded size of %d.\n",
-			     ME6000_AO_FIFO_COUNT);
-			err = ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-		}
-	}
-
-	*count = *count - left_to_copy_from_user;
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static irqreturn_t me6000_ao_isr(int irq, void *dev_id)
-{
-	me6000_ao_subdevice_t *instance = dev_id;
-	uint32_t irq_status;
-	uint32_t ctrl;
-	uint32_t status;
-	int count = 0;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	irq_status = inl(instance->irq_status_reg);
-	if (!(irq_status & (ME6000_IRQ_STATUS_BIT_AO_HF << instance->ao_idx))) {
-		PINFO("%ld Shared interrupt. %s(): ID=%d: status_reg=0x%04X\n",
-		      jiffies, __func__, instance->ao_idx, irq_status);
-		return IRQ_NONE;
-	}
-
-	if (!instance->circ_buf.buf) {
-		instance->status = ao_status_stream_error;
-		PERROR_CRITICAL("CIRCULAR BUFFER NOT EXISTS!\n");
-		//Block interrupts. Stop machine.
-		ctrl = inl(instance->ctrl_reg);
-		ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-		ctrl |=
-		    ME6000_AO_CTRL_BIT_IMMEDIATE_STOP | ME6000_AO_CTRL_BIT_STOP;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-
-		//Inform user
-		wake_up_interruptible_all(&instance->wait_queue);
-		return IRQ_HANDLED;
-	}
-
-	status = inl(instance->status_reg);
-	if (!(status & ME6000_AO_STATUS_BIT_FSM)) {	//Too late. Not working! END? BROKEN PIPE?
-		/// @note Error checking was moved to separate task.
-		PDEBUG("Interrupt come but ISM is not working!\n");
-		//Block interrupts. Stop machine.
-		ctrl = inl(instance->ctrl_reg);
-		ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-		ctrl |=
-		    ME6000_AO_CTRL_BIT_STOP | ME6000_AO_CTRL_BIT_IMMEDIATE_STOP;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-
-		//Reset interrupt latch
-		inl(instance->irq_reset_reg);
-
-		/// @note User notification was also moved to separate task.
-		return IRQ_HANDLED;
-	}
-	//General procedure. Process more datas.
-
-#ifdef MEDEBUG_DEBUG
-	if (!me_circ_buf_values(&instance->circ_buf)) {	//Buffer is empty!
-		PDEBUG("Circular buffer empty!\n");
-	}
-#endif
-
-	//Check FIFO
-	if (status & ME6000_AO_STATUS_BIT_HF) {	//OK less than half
-
-		//Block interrupts
-		ctrl = inl(instance->ctrl_reg);
-		ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-
-		do {
-			//Calculate how many should be copied.
-			count =
-			    (instance->stop_data_count) ? instance->
-			    stop_data_count -
-			    instance->data_count : ME6000_AO_FIFO_COUNT / 2;
-			if (ME6000_AO_FIFO_COUNT / 2 < count) {
-				count = ME6000_AO_FIFO_COUNT / 2;
-			}
-			//Copy data
-			if (instance->mode == ME6000_AO_CONTINOUS) {	//Continous
-				count = ao_write_data(instance, count, 0);
-				if (count > 0) {
-					instance->circ_buf.tail += count;
-					instance->circ_buf.tail &=
-					    instance->circ_buf.mask;
-					instance->data_count += count;
-
-					if ((instance->status == ao_status_stream_end_wait) && !me_circ_buf_values(&instance->circ_buf)) {	//Stoping. Whole buffer was copied.
-						break;
-					}
-				}
-			} else if ((instance->mode == ME6000_AO_SW_WRAP_MODE) && ((ctrl & ME6000_AO_CTRL_MODE_MASK) == ME6000_AO_MODE_CONTINUOUS)) {	//Wraparound (software)
-				if (instance->status == ao_status_stream_end_wait) {	//We stoping => Copy to the end of the buffer.
-					count =
-					    ao_write_data(instance, count, 0);
-				} else {	//Copy in wraparound mode.
-					count =
-					    ao_write_data_wraparound(instance,
-								     count,
-								     instance->
-								     preloaded_count);
-				}
-
-				if (count > 0) {
-					instance->data_count += count;
-					instance->preloaded_count += count;
-					instance->preloaded_count %=
-					    me_circ_buf_values(&instance->
-							       circ_buf);
-
-					if ((instance->status == ao_status_stream_end_wait) && !instance->preloaded_count) {	//Stoping. Whole buffer was copied.
-						break;
-					}
-				}
-			}
-
-			if ((count <= 0) || (instance->stop_data_count && (instance->stop_data_count <= instance->data_count))) {	//End of work.
-				break;
-			}
-		}		//Repeat if still is under half fifo
-		while ((status =
-			inl(instance->status_reg)) & ME6000_AO_STATUS_BIT_HF);
-
-		//Unblock interrupts
-		ctrl = inl(instance->ctrl_reg);
-		if (count >= 0) {	//Copy was successful.
-			if (instance->stop_data_count && (instance->stop_data_count <= instance->data_count)) {	//Finishing work. No more interrupts.
-				PDEBUG("Finishing work. Interrupt disabled.\n");
-				instance->status = ao_status_stream_end_wait;
-			} else if (count > 0) {	//Normal work. Enable interrupt.
-				PDEBUG("Normal work. Enable interrupt.\n");
-				ctrl |= ME6000_AO_CTRL_BIT_ENABLE_IRQ;
-			} else {	//Normal work but there are no more data in buffer. Interrupt blocked. stream_write() will unblock it.
-				PDEBUG
-				    ("No data in software buffer. Interrupt blocked.\n");
-			}
-		} else {	//Error during copy.
-			instance->status = ao_status_stream_fifo_error;
-		}
-
-		outl(ctrl, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, ctrl);
-	} else {		//?? more than half
-		PDEBUG
-		    ("Interrupt come but FIFO more than half full! Reset interrupt.\n");
-	}
-
-	PINFO("ISR: Buffer count: %d.(T:%d H:%d)\n",
-	      me_circ_buf_values(&instance->circ_buf), instance->circ_buf.tail,
-	      instance->circ_buf.head);
-	PINFO("ISR: Stop count: %d.\n", instance->stop_count);
-	PINFO("ISR: Stop data count: %d.\n", instance->stop_data_count);
-	PINFO("ISR: Data count: %d.\n", instance->data_count);
-
-	//Reset interrupt latch
-	inl(instance->irq_reset_reg);
-
-	//Inform user
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return IRQ_HANDLED;
-}
-
-static void me6000_ao_destructor(struct me_subdevice *subdevice)
-{
-	me6000_ao_subdevice_t *instance;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	instance->ao_control_task_flag = 0;
-
-	// Reset subdevice to asure clean exit.
-	me6000_ao_io_reset_subdevice(subdevice, NULL,
-				     ME_IO_RESET_SUBDEVICE_NO_FLAGS);
-
-	// Remove any tasks from work queue. This is paranoic because it was done allready in reset().
-	if (!cancel_delayed_work(&instance->ao_control_task)) {	//Wait 2 ticks to be sure that control task is removed from queue.
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(2);
-	}
-
-	if (instance->fifo & ME6000_AO_HAS_FIFO) {
-		if (instance->irq) {
-			free_irq(instance->irq, instance);
-			instance->irq = 0;
-		}
-
-		if (instance->circ_buf.buf) {
-			PDEBUG("free circ_buf = %p size=%d",
-			       instance->circ_buf.buf,
-			       PAGE_SHIFT << ME6000_AO_CIRC_BUF_SIZE_ORDER);
-			free_pages((unsigned long)instance->circ_buf.buf,
-				   ME6000_AO_CIRC_BUF_SIZE_ORDER);
-		}
-		instance->circ_buf.buf = NULL;
-	}
-
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-me6000_ao_subdevice_t *me6000_ao_constructor(uint32_t reg_base,
-					     spinlock_t *preload_reg_lock,
-					     uint32_t *preload_flags,
-					     uint32_t *triggering_flags,
-					     int ao_idx,
-					     int fifo,
-					     int irq,
-					     int high_range,
-					     struct workqueue_struct *me6000_wq)
-{
-	me6000_ao_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed ID=%d.\n", ao_idx);
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me6000_ao_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me6000_ao_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->preload_reg_lock = preload_reg_lock;
-	subdevice->preload_flags = preload_flags;
-	subdevice->triggering_flags = triggering_flags;
-
-	/* Store analog output index */
-	subdevice->ao_idx = ao_idx;
-
-	/* Store if analog output has fifo */
-	subdevice->fifo = fifo;
-
-	if (subdevice->fifo & ME6000_AO_HAS_FIFO) {
-		/* Allocate and initialize circular buffer */
-		subdevice->circ_buf.mask = ME6000_AO_CIRC_BUF_COUNT - 1;
-		subdevice->circ_buf.buf =
-		    (void *)__get_free_pages(GFP_KERNEL,
-					     ME6000_AO_CIRC_BUF_SIZE_ORDER);
-		PDEBUG("circ_buf = %p size=%ld\n", subdevice->circ_buf.buf,
-		       ME6000_AO_CIRC_BUF_SIZE);
-
-		if (!subdevice->circ_buf.buf) {
-			PERROR
-			    ("Cannot initialize subdevice base class instance.\n");
-			kfree(subdevice);
-			return NULL;
-		}
-
-		memset(subdevice->circ_buf.buf, 0, ME6000_AO_CIRC_BUF_SIZE);
-	} else {
-		subdevice->circ_buf.mask = 0;
-		subdevice->circ_buf.buf = NULL;
-	}
-	subdevice->circ_buf.head = 0;
-	subdevice->circ_buf.tail = 0;
-
-	subdevice->status = ao_status_none;
-	subdevice->ao_control_task_flag = 0;
-	subdevice->timeout.delay = 0;
-	subdevice->timeout.start_time = jiffies;
-
-	/* Initialize wait queue */
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	/* Initialize single value to 0V */
-	subdevice->single_value = 0x8000;
-	subdevice->single_value_in_fifo = 0x8000;
-
-	/* Initialize range boarders */
-	if (high_range) {
-		subdevice->min = ME6000_AO_MIN_RANGE_HIGH;
-		subdevice->max = ME6000_AO_MAX_RANGE_HIGH;
-	} else {
-		subdevice->min = ME6000_AO_MIN_RANGE;
-		subdevice->max = ME6000_AO_MAX_RANGE;
-	}
-
-	/* Register interrupt service routine */
-
-	if (subdevice->fifo & ME6000_AO_HAS_FIFO) {
-		subdevice->irq = irq;
-		if (request_irq(subdevice->irq, me6000_ao_isr,
-				IRQF_DISABLED | IRQF_SHARED,
-				ME6000_NAME, subdevice)) {
-			PERROR("Cannot get interrupt line.\n");
-			PDEBUG("free circ_buf = %p size=%d",
-			       subdevice->circ_buf.buf,
-			       PAGE_SHIFT << ME6000_AO_CIRC_BUF_SIZE_ORDER);
-			free_pages((unsigned long)subdevice->circ_buf.buf,
-				   ME6000_AO_CIRC_BUF_SIZE_ORDER);
-			subdevice->circ_buf.buf = NULL;
-			kfree(subdevice);
-			return NULL;
-		}
-		PINFO("Registered irq=%d.\n", subdevice->irq);
-	} else {
-		subdevice->irq = 0;
-	}
-
-	/* Initialize registers */
-	// Only streamed subdevices support interrupts. For the rest this register has no meaning.
-	subdevice->irq_status_reg = reg_base + ME6000_AO_IRQ_STATUS_REG;
-	subdevice->preload_reg = reg_base + ME6000_AO_PRELOAD_REG;
-
-	if (ao_idx == 0) {
-		subdevice->ctrl_reg = reg_base + ME6000_AO_00_CTRL_REG;
-		subdevice->status_reg = reg_base + ME6000_AO_00_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME6000_AO_00_FIFO_REG;
-		subdevice->timer_reg = reg_base + ME6000_AO_00_TIMER_REG;
-		subdevice->irq_reset_reg =
-		    reg_base + ME6000_AO_00_IRQ_RESET_REG;
-		subdevice->single_reg = reg_base + ME6000_AO_00_SINGLE_REG;
-	} else if (ao_idx == 1) {
-		subdevice->ctrl_reg = reg_base + ME6000_AO_01_CTRL_REG;
-		subdevice->status_reg = reg_base + ME6000_AO_01_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME6000_AO_01_FIFO_REG;
-		subdevice->timer_reg = reg_base + ME6000_AO_01_TIMER_REG;
-		subdevice->irq_reset_reg =
-		    reg_base + ME6000_AO_01_IRQ_RESET_REG;
-		subdevice->single_reg = reg_base + ME6000_AO_01_SINGLE_REG;
-	} else if (ao_idx == 2) {
-		subdevice->ctrl_reg = reg_base + ME6000_AO_02_CTRL_REG;
-		subdevice->status_reg = reg_base + ME6000_AO_02_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME6000_AO_02_FIFO_REG;
-		subdevice->timer_reg = reg_base + ME6000_AO_02_TIMER_REG;
-		subdevice->irq_reset_reg =
-		    reg_base + ME6000_AO_02_IRQ_RESET_REG;
-		subdevice->single_reg = reg_base + ME6000_AO_02_SINGLE_REG;
-	} else if (ao_idx == 3) {
-		subdevice->ctrl_reg = reg_base + ME6000_AO_03_CTRL_REG;
-		subdevice->status_reg = reg_base + ME6000_AO_03_STATUS_REG;
-		subdevice->fifo_reg = reg_base + ME6000_AO_03_FIFO_REG;
-		subdevice->timer_reg = reg_base + ME6000_AO_03_TIMER_REG;
-		subdevice->irq_reset_reg =
-		    reg_base + ME6000_AO_03_IRQ_RESET_REG;
-		subdevice->single_reg = reg_base + ME6000_AO_03_SINGLE_REG;
-	} else {
-		subdevice->ctrl_reg = reg_base + ME6000_AO_DUMY;
-		subdevice->fifo_reg = reg_base + ME6000_AO_DUMY;
-		subdevice->timer_reg = reg_base + ME6000_AO_DUMY;
-		subdevice->irq_reset_reg = reg_base + ME6000_AO_DUMY;
-		subdevice->single_reg = reg_base + ME6000_AO_DUMY;
-
-		subdevice->status_reg = reg_base + ME6000_AO_SINGLE_STATUS_REG;
-		if (ao_idx == 4) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_04_SINGLE_REG;
-		} else if (ao_idx == 5) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_05_SINGLE_REG;
-		} else if (ao_idx == 6) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_06_SINGLE_REG;
-		} else if (ao_idx == 7) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_07_SINGLE_REG;
-		} else if (ao_idx == 8) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_08_SINGLE_REG;
-		} else if (ao_idx == 9) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_09_SINGLE_REG;
-		} else if (ao_idx == 10) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_10_SINGLE_REG;
-		} else if (ao_idx == 11) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_11_SINGLE_REG;
-		} else if (ao_idx == 12) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_12_SINGLE_REG;
-		} else if (ao_idx == 13) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_13_SINGLE_REG;
-		} else if (ao_idx == 14) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_14_SINGLE_REG;
-		} else if (ao_idx == 15) {
-			subdevice->single_reg =
-			    reg_base + ME6000_AO_15_SINGLE_REG;
-		} else {
-			PERROR_CRITICAL("WRONG SUBDEVICE ID=%d!", ao_idx);
-			me_subdevice_deinit((me_subdevice_t *) subdevice);
-			if (subdevice->fifo) {
-				free_pages((unsigned long)subdevice->circ_buf.
-					   buf, ME6000_AO_CIRC_BUF_SIZE_ORDER);
-			}
-			subdevice->circ_buf.buf = NULL;
-			kfree(subdevice);
-			return NULL;
-		}
-	}
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Override base class methods. */
-	subdevice->base.me_subdevice_destructor = me6000_ao_destructor;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me6000_ao_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me6000_ao_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me6000_ao_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me6000_ao_io_single_write;
-	subdevice->base.me_subdevice_io_stream_config =
-	    me6000_ao_io_stream_config;
-	subdevice->base.me_subdevice_io_stream_new_values =
-	    me6000_ao_io_stream_new_values;
-	subdevice->base.me_subdevice_io_stream_write =
-	    me6000_ao_io_stream_write;
-	subdevice->base.me_subdevice_io_stream_start =
-	    me6000_ao_io_stream_start;
-	subdevice->base.me_subdevice_io_stream_status =
-	    me6000_ao_io_stream_status;
-	subdevice->base.me_subdevice_io_stream_stop = me6000_ao_io_stream_stop;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me6000_ao_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me6000_ao_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me6000_ao_query_subdevice_caps;
-	subdevice->base.me_subdevice_query_subdevice_caps_args =
-	    me6000_ao_query_subdevice_caps_args;
-	subdevice->base.me_subdevice_query_range_by_min_max =
-	    me6000_ao_query_range_by_min_max;
-	subdevice->base.me_subdevice_query_number_ranges =
-	    me6000_ao_query_number_ranges;
-	subdevice->base.me_subdevice_query_range_info =
-	    me6000_ao_query_range_info;
-	subdevice->base.me_subdevice_query_timer = me6000_ao_query_timer;
-
-	//prepare work queue and work function
-	subdevice->me6000_workqueue = me6000_wq;
-
-/* workqueue API changed in kernel 2.6.20 */
-	INIT_DELAYED_WORK(&subdevice->ao_control_task,
-			  me6000_ao_work_control_task);
-
-	if (subdevice->fifo) {	//Set speed
-		outl(ME6000_AO_MIN_CHAN_TICKS - 1, subdevice->timer_reg);
-		subdevice->hardware_stop_delay = HZ / 10;	//100ms
-	}
-
-	return subdevice;
-}
-
-/** @brief Stop presentation. Preserve FIFOs.
-*
-* @param instance The subdevice instance (pointer).
-*/
-inline int ao_stop_immediately(me6000_ao_subdevice_t *instance)
-{
-	unsigned long cpu_flags;
-	uint32_t ctrl;
-	int timeout;
-	int i;
-	uint32_t single_mask;
-
-	if (instance->ao_idx < ME6000_AO_SINGLE_STATUS_OFFSET)
-		single_mask = 0x0000;
-	else
-		single_mask = 0x0001 << (instance->ao_idx -
-				ME6000_AO_SINGLE_STATUS_OFFSET);
-
-	timeout =
-	    (instance->hardware_stop_delay >
-	     (HZ / 10)) ? instance->hardware_stop_delay : HZ / 10;
-	for (i = 0; i <= timeout; i++) {
-		if (instance->fifo) {
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			// Stop all actions. No conditions! Block interrupts. Leave FIFO untouched!
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |=
-			    ME6000_AO_CTRL_BIT_STOP |
-			    ME6000_AO_CTRL_BIT_IMMEDIATE_STOP;
-			ctrl &=
-			    ~(ME6000_AO_CTRL_BIT_ENABLE_IRQ |
-			      ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG);
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			if (!(inl(instance->status_reg) & ME6000_AO_STATUS_BIT_FSM)) {	// Exit.
-				break;
-			}
-		} else {
-			if (!(inl(instance->status_reg) & single_mask)) {	// Exit.
-				break;
-			}
-		}
-
-		PINFO("<%s> Wait for stop: %d\n", __func__, i);
-
-		//Still working!
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(1);
-	}
-
-	if (i > timeout) {
-		PERROR_CRITICAL("FSM IS BUSY!\n");
-		return ME_ERRNO_INTERNAL;
-	}
-	return ME_ERRNO_SUCCESS;
-}
-
-/** @brief Copy data from circular buffer to fifo (fast) in wraparound.
-* @note This is time critical function. Checking is done at begining and end only.
-* @note The is not reasonable way to check how many walues was in FIFO at begining. The count must be managed externaly.
-*
-* @param instance The subdevice instance (pointer).
-* @param count Maximum number of copied data.
-* @param start_pos Position of the firs value in buffer.
-*
-* @return On success: Number of copied data.
-* @return On error/success: 0.	No datas were copied => no data in buffer.
-* @return On error: -ME_ERRNO_FIFO_BUFFER_OVERFLOW.
-*/
-inline int ao_write_data_wraparound(me6000_ao_subdevice_t *instance, int count,
-				    int start_pos)
-{				/// @note This is time critical function!
-	uint32_t status;
-	uint32_t value;
-	int pos =
-	    (instance->circ_buf.tail + start_pos) & instance->circ_buf.mask;
-	int local_count = count;
-	int i = 1;
-
-	if (count <= 0) {	//Wrong count!
-		return 0;
-	}
-
-	while (i < local_count) {
-		//Get value from buffer
-		value = *(instance->circ_buf.buf + pos);
-		//Prepare it
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-
-		pos++;
-		pos &= instance->circ_buf.mask;
-		if (pos == instance->circ_buf.head) {
-			pos = instance->circ_buf.tail;
-		}
-		i++;
-	}
-
-	status = inl(instance->status_reg);
-	if (!(status & ME6000_AO_STATUS_BIT_FF)) {	//FIFO is full before all datas were copied!
-		PERROR("idx=%d FIFO is full before all datas were copied!\n",
-		       instance->ao_idx);
-		return -ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-	} else {		//Add last value
-		value = *(instance->circ_buf.buf + pos);
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-	}
-
-	PINFO("idx=%d WRAPAROUND LOADED %d values\n", instance->ao_idx,
-	      local_count);
-	return local_count;
-}
-
-/** @brief Copy data from software buffer to fifo (fast).
-* @note This is time critical function. Checking is done at begining and end only.
-* @note The is not reasonable way to check how many walues was in FIFO at begining. The count must be managed externaly.
-*
-* @param instance The subdevice instance (pointer).
-* @param count Maximum number of copied data.
-* @param start_pos Position of the firs value in buffer.
-*
-* @return On success: Number of copied data.
-* @return On error/success: 0.	No datas were copied => no data in buffer.
-* @return On error: -ME_ERRNO_FIFO_BUFFER_OVERFLOW.
-*/
-inline int ao_write_data(me6000_ao_subdevice_t *instance, int count,
-			 int start_pos)
-{				/// @note This is time critical function!
-	uint32_t status;
-	uint32_t value;
-	int pos =
-	    (instance->circ_buf.tail + start_pos) & instance->circ_buf.mask;
-	int local_count = count;
-	int max_count;
-	int i = 1;
-
-	if (count <= 0) {	//Wrong count!
-		return 0;
-	}
-
-	max_count = me_circ_buf_values(&instance->circ_buf) - start_pos;
-	if (max_count <= 0) {	//No data to copy!
-		return 0;
-	}
-
-	if (max_count < count) {
-		local_count = max_count;
-	}
-
-	while (i < local_count) {
-		//Get value from buffer
-		value = *(instance->circ_buf.buf + pos);
-		//Prepare it
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-
-		pos++;
-		pos &= instance->circ_buf.mask;
-		i++;
-	}
-
-	status = inl(instance->status_reg);
-	if (!(status & ME6000_AO_STATUS_BIT_FF)) {	//FIFO is full before all datas were copied!
-		PERROR("idx=%d FIFO is full before all datas were copied!\n",
-		       instance->ao_idx);
-		return -ME_ERRNO_FIFO_BUFFER_OVERFLOW;
-	} else {		//Add last value
-		value = *(instance->circ_buf.buf + pos);
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-	}
-
-	PINFO("idx=%d FAST LOADED %d values\n", instance->ao_idx, local_count);
-	return local_count;
-}
-
-/** @brief Copy data from software buffer to fifo (slow).
-* @note This is slow function that copy all data from buffer to FIFO with full control.
-*
-* @param instance The subdevice instance (pointer).
-* @param count Maximum number of copied data.
-* @param start_pos Position of the firs value in buffer.
-*
-* @return On success: Number of copied values.
-* @return On error/success: 0.	FIFO was full at begining.
-* @return On error: -ME_ERRNO_RING_BUFFER_UNDEFFLOW.
-*/
-inline int ao_write_data_pooling(me6000_ao_subdevice_t *instance, int count,
-				 int start_pos)
-{				/// @note This is slow function!
-	uint32_t status;
-	uint32_t value;
-	int pos =
-	    (instance->circ_buf.tail + start_pos) & instance->circ_buf.mask;
-	int local_count = count;
-	int i;
-	int max_count;
-
-	if (count <= 0) {	//Wrong count!
-		PERROR("idx=%d SLOW LOADED: Wrong count!\n", instance->ao_idx);
-		return 0;
-	}
-
-	max_count = me_circ_buf_values(&instance->circ_buf) - start_pos;
-	if (max_count <= 0) {	//No data to copy!
-		PERROR("idx=%d SLOW LOADED: No data to copy!\n",
-		       instance->ao_idx);
-		return 0;
-	}
-
-	if (max_count < count) {
-		local_count = max_count;
-	}
-
-	for (i = 0; i < local_count; i++) {
-		status = inl(instance->status_reg);
-		if (!(status & ME6000_AO_STATUS_BIT_FF)) {	//FIFO is full!
-			return i;
-		}
-		//Get value from buffer
-		value = *(instance->circ_buf.buf + pos);
-		//Prepare it
-		if (instance->ao_idx & 0x1) {
-			value <<= 16;
-		}
-		//Put value to FIFO
-		outl(value, instance->fifo_reg);
-		//PDEBUG_REG("idx=%d fifo_reg outl(0x%lX+0x%lX)=0x%x\n", instance->ao_idx, instance->reg_base, instance->fifo_reg - instance->reg_base, value);
-
-		pos++;
-		pos &= instance->circ_buf.mask;
-	}
-
-	PINFO("idx=%d SLOW LOADED %d values\n", instance->ao_idx, local_count);
-	return local_count;
-}
-
-/** @brief Copy data from user space to circular buffer.
-* @param instance The subdevice instance (pointer).
-* @param count Number of datas in user space.
-* @param user_values Buffer's pointer.
-*
-* @return On success: Number of copied values.
-* @return On error: -ME_ERRNO_INTERNAL.
-*/
-inline int ao_get_data_from_user(me6000_ao_subdevice_t *instance, int count,
-				 int *user_values)
-{
-	int i, err;
-	int empty_space;
-	int copied;
-	int value;
-
-	empty_space = me_circ_buf_space(&instance->circ_buf);
-	//We have only this space free.
-	copied = (count < empty_space) ? count : empty_space;
-	for (i = 0; i < copied; i++) {	//Copy from user to buffer
-		if ((err = get_user(value, (int *)(user_values + i)))) {
-			PERROR
-			    ("idx=%d BUFFER LOADED: get_user(0x%p) return an error: %d\n",
-			     instance->ao_idx, user_values + i, err);
-			return -ME_ERRNO_INTERNAL;
-		}
-		/// @note The analog output in me6000 series has size of 16 bits.
-		*(instance->circ_buf.buf + instance->circ_buf.head) =
-		    (uint16_t) value;
-		instance->circ_buf.head++;
-		instance->circ_buf.head &= instance->circ_buf.mask;
-	}
-
-	PINFO("idx=%d BUFFER LOADED %d values\n", instance->ao_idx, copied);
-	return copied;
-}
-
-static void me6000_ao_work_control_task(struct work_struct *work)
-{
-	me6000_ao_subdevice_t *instance;
-	unsigned long cpu_flags = 0;
-	uint32_t status;
-	uint32_t ctrl;
-	uint32_t synch;
-	int reschedule = 0;
-	int signaling = 0;
-	uint32_t single_mask;
-
-	instance =
-	    container_of((void *)work, me6000_ao_subdevice_t, ao_control_task);
-	PINFO("<%s: %ld> executed. idx=%d\n", __func__, jiffies,
-	      instance->ao_idx);
-
-	status = inl(instance->status_reg);
-	PDEBUG_REG("status_reg inl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->status_reg - instance->reg_base, status);
-
-/// @note AO_STATUS_BIT_FSM doesn't work as should be for pure single channels (idx>=4)
-//      single_mask = (instance->ao_idx-ME6000_AO_SINGLE_STATUS_OFFSET < 0) ? 0x0000 : (0x0001 << (instance->ao_idx-ME6000_AO_SINGLE_STATUS_OFFSET));
-	single_mask = *instance->triggering_flags & (0x1 << instance->ao_idx);
-
-	switch (instance->status) {	// Checking actual mode.
-
-		// Not configured for work.
-	case ao_status_none:
-		break;
-
-		//This are stable modes. No need to do anything. (?)
-	case ao_status_single_configured:
-	case ao_status_stream_configured:
-	case ao_status_stream_fifo_error:
-	case ao_status_stream_buffer_error:
-	case ao_status_stream_error:
-		PERROR("Shouldn't be running!.\n");
-		break;
-
-		// Single modes
-	case ao_status_single_run_wait:
-	case ao_status_single_run:
-	case ao_status_single_end_wait:
-		if (instance->fifo) {	// Extra registers.
-			if (!(status & ME6000_AO_STATUS_BIT_FSM)) {	// State machine is not working.
-				if (((instance->fifo & ME6000_AO_HAS_FIFO)
-				     && (!(status & ME6000_AO_STATUS_BIT_EF)))
-				    || (!(instance->fifo & ME6000_AO_HAS_FIFO))) {	// Single is in end state.
-					PDEBUG
-					    ("Single call has been complited.\n");
-
-					// Set correct value for single_read();
-					instance->single_value =
-					    instance->single_value_in_fifo;
-
-					// Set status as 'ao_status_single_end'
-					instance->status = ao_status_single_end;
-
-					spin_lock(instance->preload_reg_lock);
-					if ((single_mask) && (*instance->preload_flags & (ME6000_AO_SYNC_HOLD << instance->ao_idx))) {	// This is one of synchronous start channels. Set all as triggered.
-						*instance->triggering_flags =
-						    0x00000000;
-					} else {
-						//Set this channel as triggered (none active).
-						*instance->triggering_flags &=
-						    ~(0x1 << instance->ao_idx);
-					}
-					spin_unlock(instance->preload_reg_lock);
-
-					// Signal the end.
-					signaling = 1;
-					// Wait for stop ISM.
-					reschedule = 1;
-
-					break;
-				}
-			}
-			// Check timeout.
-			if ((instance->timeout.delay) && ((jiffies - instance->timeout.start_time) >= instance->timeout.delay)) {	// Timeout
-				PDEBUG("Timeout reached.\n");
-				// Stop all actions. No conditions! Block interrupts and trigger. Leave FIFO untouched!
-				spin_lock_irqsave(&instance->subdevice_lock,
-						  cpu_flags);
-				ctrl = inl(instance->ctrl_reg);
-				ctrl |=
-				    ME6000_AO_CTRL_BIT_STOP |
-				    ME6000_AO_CTRL_BIT_IMMEDIATE_STOP;
-				ctrl &=
-				    ~(ME6000_AO_CTRL_BIT_ENABLE_IRQ |
-				      ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG);
-				ctrl &=
-				    ~(ME6000_AO_CTRL_BIT_EX_TRIG_EDGE |
-				      ME6000_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH);
-				//Disabling FIFO
-				ctrl &= ~ME6000_AO_CTRL_BIT_ENABLE_FIFO;
-
-				outl(ctrl, instance->ctrl_reg);
-				PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->ctrl_reg -
-					   instance->reg_base, ctrl);
-				spin_unlock_irqrestore(&instance->
-						       subdevice_lock,
-						       cpu_flags);
-
-				//Reset interrupt latch
-				inl(instance->irq_reset_reg);
-
-				spin_lock(instance->preload_reg_lock);
-				//Remove from synchronous start. Block triggering from this output.
-				synch = inl(instance->preload_reg);
-				synch &=
-				    ~((ME6000_AO_SYNC_HOLD |
-				       ME6000_AO_SYNC_EXT_TRIG) << instance->
-				      ao_idx);
-				if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {	// No FIFO - set to single safe mode
-					synch |=
-					    ME6000_AO_SYNC_HOLD << instance->
-					    ao_idx;
-				}
-				outl(synch, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     synch);
-				//Set this channel as triggered (none active).
-				*instance->triggering_flags &=
-				    ~(0x1 << instance->ao_idx);
-				spin_unlock(instance->preload_reg_lock);
-
-				// Set correct value for single_read();
-				instance->single_value_in_fifo =
-				    instance->single_value;
-
-				instance->status = ao_status_single_end;
-
-				// Signal the end.
-				signaling = 1;
-			}
-		} else {	// No extra registers.
-/*
-				if (!(status & single_mask))
-				{// State machine is not working.
-					PDEBUG("Single call has been complited.\n");
-
-					// Set correct value for single_read();
-					instance->single_value = instance->single_value_in_fifo;
-
-					// Set status as 'ao_status_single_end'
-					instance->status = ao_status_single_end;
-
-					// Signal the end.
-					signaling = 1;
-					// Wait for stop ISM.
-					reschedule = 1;
-
-					break;
-				}
-*/
-			if (!single_mask) {	// Was triggered.
-				PDEBUG("Single call has been complited.\n");
-
-				// Set correct value for single_read();
-				instance->single_value =
-				    instance->single_value_in_fifo;
-
-				// Set status as 'ao_status_single_end'
-				instance->status = ao_status_single_end;
-
-				// Signal the end.
-				signaling = 1;
-
-				break;
-			}
-			// Check timeout.
-			if ((instance->timeout.delay) && ((jiffies - instance->timeout.start_time) >= instance->timeout.delay)) {	// Timeout
-				PDEBUG("Timeout reached.\n");
-
-				spin_lock(instance->preload_reg_lock);
-				//Remove from synchronous start. Block triggering from this output.
-				synch = inl(instance->preload_reg);
-				synch &=
-				    ~(ME6000_AO_SYNC_EXT_TRIG << instance->
-				      ao_idx);
-				synch |=
-				    ME6000_AO_SYNC_HOLD << instance->ao_idx;
-
-				outl(synch, instance->preload_reg);
-				PDEBUG_REG
-				    ("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->preload_reg - instance->reg_base,
-				     synch);
-				//Set this channel as triggered (none active).
-				*instance->triggering_flags &=
-				    ~(0x1 << instance->ao_idx);
-				spin_unlock(instance->preload_reg_lock);
-
-				// Restore old settings.
-				PDEBUG("Write old value back to register.\n");
-				outl(instance->single_value,
-				     instance->single_reg);
-				PDEBUG_REG
-				    ("single_reg outl(0x%lX+0x%lX)=0x%x\n",
-				     instance->reg_base,
-				     instance->single_reg - instance->reg_base,
-				     instance->single_value);
-
-				// Set correct value for single_read();
-				instance->single_value_in_fifo =
-				    instance->single_value;
-
-				instance->status = ao_status_single_end;
-
-				// Signal the end.
-				signaling = 1;
-			}
-		}
-
-		// Wait for stop.
-		reschedule = 1;
-		break;
-
-	case ao_status_stream_end:
-		if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {	// No FIFO
-			PERROR_CRITICAL
-			    ("Streaming on single device! This feature is not implemented in this version!\n");
-			instance->status = ao_status_stream_error;
-			// Signal the end.
-			signaling = 1;
-			break;
-		}
-	case ao_status_single_end:
-		if (instance->fifo) {	// Extra registers.
-			if (status & ME6000_AO_STATUS_BIT_FSM) {	// State machine is working but the status is set to end. Force stop.
-
-				// Wait for stop.
-				reschedule = 1;
-			}
-
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			// Stop all actions. No conditions! Block interrupts and trigger. Leave FIFO untouched!
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |=
-			    ME6000_AO_CTRL_BIT_IMMEDIATE_STOP |
-			    ME6000_AO_CTRL_BIT_STOP;
-			ctrl &=
-			    ~(ME6000_AO_CTRL_BIT_ENABLE_IRQ |
-			      ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG);
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			//Reset interrupt latch
-			inl(instance->irq_reset_reg);
-		} else {	// No extra registers.
-/*
-				if (status & single_mask)
-				{// State machine is working but the status is set to end. Force stop.
-
-					// Wait for stop.
-					reschedule = 1;
-				}
-*/
-		}
-		break;
-
-		// Stream modes
-	case ao_status_stream_run_wait:
-		if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {	// No FIFO
-			PERROR_CRITICAL
-			    ("Streaming on single device! This feature is not implemented in this version!\n");
-			instance->status = ao_status_stream_error;
-			// Signal the end.
-			signaling = 1;
-			break;
-		}
-
-		if (status & ME6000_AO_STATUS_BIT_FSM) {	// State machine is working. Waiting for start finish.
-			instance->status = ao_status_stream_run;
-
-			// Signal end of this step
-			signaling = 1;
-		} else {	// State machine is not working.
-			if (!(status & ME6000_AO_STATUS_BIT_EF)) {	// FIFO is empty. Procedure has started and finish already!
-				instance->status = ao_status_stream_end;
-
-				// Signal the end.
-				signaling = 1;
-				// Wait for stop.
-				reschedule = 1;
-				break;
-			}
-		}
-
-		// Check timeout.
-		if ((instance->timeout.delay) && ((jiffies - instance->timeout.start_time) >= instance->timeout.delay)) {	// Timeout
-			PDEBUG("Timeout reached.\n");
-			// Stop all actions. No conditions! Block interrupts. Leave FIFO untouched!
-			spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-			ctrl = inl(instance->ctrl_reg);
-			ctrl |=
-			    ME6000_AO_CTRL_BIT_STOP |
-			    ME6000_AO_CTRL_BIT_IMMEDIATE_STOP;
-			ctrl &=
-			    ~(ME6000_AO_CTRL_BIT_ENABLE_IRQ |
-			      ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG);
-			outl(ctrl, instance->ctrl_reg);
-			PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->ctrl_reg - instance->reg_base,
-				   ctrl);
-			spin_unlock_irqrestore(&instance->subdevice_lock,
-					       cpu_flags);
-
-			//Reset interrupt latch
-			inl(instance->irq_reset_reg);
-
-			spin_lock(instance->preload_reg_lock);
-			//Remove from synchronous start. Block triggering from this output.
-			synch = inl(instance->preload_reg);
-			synch &=
-			    ~((ME6000_AO_SYNC_HOLD | ME6000_AO_SYNC_EXT_TRIG) <<
-			      instance->ao_idx);
-			outl(synch, instance->preload_reg);
-			PDEBUG_REG("preload_reg outl(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->preload_reg - instance->reg_base,
-				   synch);
-			spin_unlock(instance->preload_reg_lock);
-
-			instance->status = ao_status_stream_end;
-
-			// Signal the end.
-			signaling = 1;
-		}
-		// Wait for stop.
-		reschedule = 1;
-		break;
-
-	case ao_status_stream_run:
-		if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {	// No FIFO
-			PERROR_CRITICAL
-			    ("Streaming on single device! This feature is not implemented in this version!\n");
-			instance->status = ao_status_stream_error;
-			// Signal the end.
-			signaling = 1;
-			break;
-		}
-
-		if (!(status & ME6000_AO_STATUS_BIT_FSM)) {	// State machine is not working. This is an error.
-			// BROKEN PIPE!
-			if (!(status & ME6000_AO_STATUS_BIT_EF)) {	// FIFO is empty.
-				if (me_circ_buf_values(&instance->circ_buf)) {	// Software buffer is not empty.
-					if (instance->stop_data_count && (instance->stop_data_count <= instance->data_count)) {	//Finishing work. Requed data shown.
-						PDEBUG
-						    ("ISM stoped. No data in FIFO. Buffer is not empty.\n");
-						instance->status =
-						    ao_status_stream_end;
-					} else {
-						PERROR
-						    ("Output stream has been broken. ISM stoped. No data in FIFO. Buffer is not empty.\n");
-						instance->status =
-						    ao_status_stream_buffer_error;
-					}
-				} else {	// Software buffer is empty.
-					PDEBUG
-					    ("ISM stoped. No data in FIFO. Buffer is empty.\n");
-					instance->status = ao_status_stream_end;
-				}
-			} else {	// There are still datas in FIFO.
-				if (me_circ_buf_values(&instance->circ_buf)) {	// Software buffer is not empty.
-					PERROR
-					    ("Output stream has been broken. ISM stoped but some data in FIFO and buffer.\n");
-				} else {	// Software buffer is empty.
-					PERROR
-					    ("Output stream has been broken. ISM stoped but some data in FIFO. Buffer is empty.\n");
-				}
-				instance->status = ao_status_stream_fifo_error;
-
-			}
-
-			// Signal the failure.
-			signaling = 1;
-			break;
-		}
-		// Wait for stop.
-		reschedule = 1;
-		break;
-
-	case ao_status_stream_end_wait:
-		if (!(instance->fifo & ME6000_AO_HAS_FIFO)) {	// No FIFO
-			PERROR_CRITICAL
-			    ("Streaming on single device! This feature is not implemented in this version!\n");
-			instance->status = ao_status_stream_error;
-			// Signal the end.
-			signaling = 1;
-			break;
-		}
-
-		if (!(status & ME6000_AO_STATUS_BIT_FSM)) {	// State machine is not working. Waiting for stop finish.
-			instance->status = ao_status_stream_end;
-			signaling = 1;
-		}
-		// State machine is working.
-		reschedule = 1;
-		break;
-
-	default:
-		PERROR_CRITICAL("Status is in wrong state (%d)!\n",
-				instance->status);
-		instance->status = ao_status_stream_error;
-		// Signal the end.
-		signaling = 1;
-		break;
-
-	}
-
-	if (signaling) {	//Signal it.
-		wake_up_interruptible_all(&instance->wait_queue);
-	}
-
-	if (instance->ao_control_task_flag && reschedule) {	// Reschedule task
-		queue_delayed_work(instance->me6000_workqueue,
-				   &instance->ao_control_task, 1);
-	} else {
-		PINFO("<%s> Ending control task.\n", __func__);
-	}
-
-}
-
-static int me6000_ao_query_range_by_min_max(me_subdevice_t *subdevice,
-					    int unit,
-					    int *min,
-					    int *max, int *maxdata, int *range)
-{
-	me6000_ao_subdevice_t *instance;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if ((*max - *min) < 0) {
-		PERROR("Invalid minimum and maximum values specified.\n");
-		return ME_ERRNO_INVALID_MIN_MAX;
-	}
-
-	if ((unit == ME_UNIT_VOLT) || (unit == ME_UNIT_ANY)) {
-		if ((*max <= (instance->max + 1000)) && (*min >= instance->min)) {
-			*min = instance->min;
-			*max = instance->max;
-			*maxdata = ME6000_AO_MAX_DATA;
-			*range = 0;
-		} else {
-			PERROR("No matching range available.\n");
-			return ME_ERRNO_NO_RANGE;
-		}
-	} else {
-		PERROR("Invalid physical unit specified.\n");
-		return ME_ERRNO_INVALID_UNIT;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_ao_query_number_ranges(me_subdevice_t *subdevice,
-					 int unit, int *count)
-{
-	me6000_ao_subdevice_t *instance;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if ((unit == ME_UNIT_VOLT) || (unit == ME_UNIT_ANY)) {
-		*count = 1;
-	} else {
-		*count = 0;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_ao_query_range_info(me_subdevice_t *subdevice,
-				      int range,
-				      int *unit,
-				      int *min, int *max, int *maxdata)
-{
-	me6000_ao_subdevice_t *instance;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (range == 0) {
-		*unit = ME_UNIT_VOLT;
-		*min = instance->min;
-		*max = instance->max;
-		*maxdata = ME6000_AO_MAX_DATA;
-	} else {
-		PERROR("Invalid range number specified.\n");
-		return ME_ERRNO_INVALID_RANGE;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_ao_query_timer(me_subdevice_t *subdevice,
-				 int timer,
-				 int *base_frequency,
-				 long long *min_ticks, long long *max_ticks)
-{
-	me6000_ao_subdevice_t *instance;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (instance->fifo) {	//Streaming device.
-		*base_frequency = ME6000_AO_BASE_FREQUENCY;
-		if (timer == ME_TIMER_ACQ_START) {
-			*min_ticks = ME6000_AO_MIN_ACQ_TICKS;
-			*max_ticks = ME6000_AO_MAX_ACQ_TICKS;
-		} else if (timer == ME_TIMER_CONV_START) {
-			*min_ticks = ME6000_AO_MIN_CHAN_TICKS;
-			*max_ticks = ME6000_AO_MAX_CHAN_TICKS;
-		}
-	} else {		//Not streaming device!
-		*base_frequency = 0;
-		*min_ticks = 0;
-		*max_ticks = 0;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_ao_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	me6000_ao_subdevice_t *instance;
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	*number = 1;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_ao_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	me6000_ao_subdevice_t *instance;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	*type = ME_TYPE_AO;
-	*subtype =
-	    (instance->
-	     fifo & ME6000_AO_HAS_FIFO) ? ME_SUBTYPE_STREAMING :
-	    ME_SUBTYPE_SINGLE;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_ao_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	me6000_ao_subdevice_t *instance;
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	*caps =
-	    ME_CAPS_AO_TRIG_SYNCHRONOUS | ((instance->fifo) ? ME_CAPS_AO_FIFO :
-					   ME_CAPS_NONE);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_ao_query_subdevice_caps_args(struct me_subdevice *subdevice,
-					       int cap, int *args, int count)
-{
-	me6000_ao_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	instance = (me6000_ao_subdevice_t *) subdevice;
-
-	PDEBUG("executed. idx=%d\n", instance->ao_idx);
-
-	if (count != 1) {
-		PERROR("Invalid capability argument count.\n");
-		return ME_ERRNO_INVALID_CAP_ARG_COUNT;
-	}
-
-	switch (cap) {
-	case ME_CAP_AI_FIFO_SIZE:
-		args[0] = (instance->fifo) ? ME6000_AO_FIFO_COUNT : 0;
-		break;
-
-	case ME_CAP_AI_BUFFER_SIZE:
-		args[0] =
-		    (instance->circ_buf.buf) ? ME6000_AO_CIRC_BUF_COUNT : 0;
-		break;
-
-	default:
-		PERROR("Invalid capability.\n");
-		err = ME_ERRNO_INVALID_CAP;
-		args[0] = 0;
-	}
-
-	return err;
-}
diff --git a/drivers/staging/meilhaus/me6000_ao.h b/drivers/staging/meilhaus/me6000_ao.h
deleted file mode 100644
index d86fb29..0000000
--- a/drivers/staging/meilhaus/me6000_ao.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/**
- * @file me6000_ao.h
- *
- * @brief Meilhaus ME-6000 analog output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME6000_AO_H_
-#define _ME6000_AO_H_
-
-#include "mesubdevice.h"
-#include "mecirc_buf.h"
-#include "meioctl.h"
-
-#ifdef __KERNEL__
-
-#define ME6000_AO_MAX_SUBDEVICES	16
-#define ME6000_AO_FIFO_COUNT		8192
-
-#define ME6000_AO_BASE_FREQUENCY	33000000L
-
-#define ME6000_AO_MIN_ACQ_TICKS		0LL
-#define ME6000_AO_MAX_ACQ_TICKS		0LL
-
-#define ME6000_AO_MIN_CHAN_TICKS	66LL
-#define ME6000_AO_MAX_CHAN_TICKS	0xFFFFFFFFLL
-
-#define ME6000_AO_MIN_RANGE			-10000000
-#define ME6000_AO_MAX_RANGE			9999694
-
-#define ME6000_AO_MIN_RANGE_HIGH	0
-#define ME6000_AO_MAX_RANGE_HIGH	49999237
-
-#define ME6000_AO_MAX_DATA			0xFFFF
-
-#ifdef ME_SYNAPSE
-# define ME6000_AO_CIRC_BUF_SIZE_ORDER 		8	// 2^n PAGES =>> Maximum value of 1MB for Synapse
-#else
-# define ME6000_AO_CIRC_BUF_SIZE_ORDER 		5	// 2^n PAGES =>> 128KB
-#endif
-#define ME6000_AO_CIRC_BUF_SIZE 		PAGE_SIZE<<ME6000_AO_CIRC_BUF_SIZE_ORDER	// Buffer size in bytes.
-
-#  ifdef _CBUFF_32b_t
-#   define ME6000_AO_CIRC_BUF_COUNT	((ME6000_AO_CIRC_BUF_SIZE) / sizeof(uint32_t))	// Size in values
-#  else
-#   define ME6000_AO_CIRC_BUF_COUNT	((ME6000_AO_CIRC_BUF_SIZE) / sizeof(uint16_t))	// Size in values
-#  endif
-
-#  define ME6000_AO_CONTINOUS					0x0
-#  define ME6000_AO_WRAP_MODE					0x1
-#  define ME6000_AO_HW_MODE						0x2
-
-#  define ME6000_AO_HW_WRAP_MODE				(ME6000_AO_WRAP_MODE | ME6000_AO_HW_MODE)
-#  define ME6000_AO_SW_WRAP_MODE				ME6000_AO_WRAP_MODE
-
-#  define ME6000_AO_INF_STOP_MODE				0x0
-#  define ME6000_AO_ACQ_STOP_MODE				0x1
-#  define ME6000_AO_SCAN_STOP_MODE				0x2
-
-#  define ME6000_AO_EXTRA_HARDWARE				0x1
-#  define ME6000_AO_HAS_FIFO					0x2
-
-typedef enum ME6000_AO_STATUS {
-	ao_status_none = 0,
-	ao_status_single_configured,
-	ao_status_single_run_wait,
-	ao_status_single_run,
-	ao_status_single_end_wait,
-	ao_status_single_end,
-	ao_status_stream_configured,
-	ao_status_stream_run_wait,
-	ao_status_stream_run,
-	ao_status_stream_end_wait,
-	ao_status_stream_end,
-	ao_status_stream_fifo_error,
-	ao_status_stream_buffer_error,
-	ao_status_stream_error,
-	ao_status_last
-} ME6000_AO_STATUS;
-
-typedef struct me6000_ao_timeout {
-	unsigned long start_time;
-	unsigned long delay;
-} me6000_ao_timeout_t;
-
-/**
- * @brief The ME-6000 analog output subdevice class.
- */
-typedef struct me6000_ao_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;					/**< The subdevice base class. */
-	unsigned int ao_idx;
-
-	/* Attributes */
-	spinlock_t subdevice_lock;				/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *preload_reg_lock;			/**< Spin lock to protect preload_reg from concurrent access. */
-
-	uint32_t *preload_flags;
-	uint32_t *triggering_flags;
-
-	/* Hardware feautres */
-	unsigned int irq;						/**< The interrupt request number assigned by the PCI BIOS. */
-	int fifo;								/**< If set this device has a FIFO. */
-
-	//Range
-	int min;
-	int max;
-
-	int single_value;						/**< Mirror of the output value in single mode. */
-	int single_value_in_fifo;				/**< Mirror of the value written in single mode. */
-	uint32_t ctrl_trg;						/**< Mirror of the trigger settings. */
-
-	volatile int mode;						/**< Flags used for storing SW wraparound setup*/
-	int stop_mode;							/**< The user defined stop condition flag. */
-	unsigned int start_mode;
-	unsigned int stop_count;				/**< The user defined dates presentation end count. */
-	unsigned int stop_data_count;			/**< The stop presentation count. */
-	unsigned int data_count;				/**< The real presentation count. */
-	unsigned int preloaded_count;			/**< The next data addres in buffer. <= for wraparound mode. */
-	int hardware_stop_delay;				/**< The time that stop can take. This is only to not show hardware bug to user. */
-
-	volatile enum ME6000_AO_STATUS status;	/**< The current stream status flag. */
-	me6000_ao_timeout_t timeout;			/**< The timeout for start in blocking and non-blocking mode. */
-
-									/* Registers *//**< All registers are 32 bits long. */
-	unsigned long ctrl_reg;
-	unsigned long status_reg;
-	unsigned long fifo_reg;
-	unsigned long single_reg;
-	unsigned long timer_reg;
-	unsigned long irq_status_reg;
-	unsigned long preload_reg;
-	unsigned long irq_reset_reg;
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-
-	/* Software buffer */
-	me_circ_buf_t circ_buf;					/**< Circular buffer holding measurment data. */
-	wait_queue_head_t wait_queue;			/**< Wait queue to put on tasks waiting for data to arrive. */
-
-	struct workqueue_struct *me6000_workqueue;
-	struct delayed_work ao_control_task;
-
-	volatile int ao_control_task_flag;		/**< Flag controling reexecuting of control task */
-
-} me6000_ao_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-6000 analog output subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param ctrl_reg_lock Pointer to spin lock protecting the control register from concurrent access.
- * @param preload_flags Pointer to spin lock protecting the hold&trigger register from concurrent access.
- * @param ao_idx Subdevice number.
- * @param fifo Flag set if subdevice has hardware FIFO.
- * @param irq IRQ number.
- * @param high_range Flag set if subdevice has high curren output.
- * @param me6000_wq Queue for asynchronous task (1 queue for all subdevice on 1 board).
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me6000_ao_subdevice_t *me6000_ao_constructor(uint32_t reg_base,
-					     spinlock_t * preload_reg_lock,
-					     uint32_t * preload_flags,
-					     uint32_t * triggering_flags,
-					     int ao_idx,
-					     int fifo,
-					     int irq,
-					     int high_range,
-					     struct workqueue_struct
-					     *me6000_wq);
-
-#endif //__KERNEL__
-#endif //_ME6000_AO_H_
diff --git a/drivers/staging/meilhaus/me6000_ao_reg.h b/drivers/staging/meilhaus/me6000_ao_reg.h
deleted file mode 100644
index eb8f46e..0000000
--- a/drivers/staging/meilhaus/me6000_ao_reg.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/**
- * @file me6000_ao_reg.h
- *
- * @brief ME-6000 analog output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME6000_AO_REG_H_
-#define _ME6000_AO_REG_H_
-
-#ifdef __KERNEL__
-
-// AO
-#define ME6000_AO_00_CTRL_REG					0x00	// R/W
-#define ME6000_AO_00_STATUS_REG					0x04	// R/_
-#define ME6000_AO_00_FIFO_REG					0x08	// _/W
-#define ME6000_AO_00_SINGLE_REG					0x0C	// R/W
-#define ME6000_AO_00_TIMER_REG					0x10	// _/W
-
-#define ME6000_AO_01_CTRL_REG					0x18	// R/W
-#define ME6000_AO_01_STATUS_REG					0x1C	// R/_
-#define ME6000_AO_01_FIFO_REG					0x20	// _/W
-#define ME6000_AO_01_SINGLE_REG					0x24	// R/W
-#define ME6000_AO_01_TIMER_REG					0x28	// _/W
-
-#define ME6000_AO_02_CTRL_REG					0x30	// R/W
-#define ME6000_AO_02_STATUS_REG					0x34	// R/_
-#define ME6000_AO_02_FIFO_REG					0x38	// _/W
-#define ME6000_AO_02_SINGLE_REG					0x3C	// R/W
-#define ME6000_AO_02_TIMER_REG					0x40	// _/W
-
-#define ME6000_AO_03_CTRL_REG					0x48	// R/W
-#define ME6000_AO_03_STATUS_REG					0x4C	// R/_
-#define ME6000_AO_03_FIFO_REG					0x50	// _/W
-#define ME6000_AO_03_SINGLE_REG					0x54	// R/W
-#define ME6000_AO_03_TIMER_REG					0x58	// _/W
-
-#define ME6000_AO_SINGLE_STATUS_REG				0xA4	// R/_
-#define ME6000_AO_SINGLE_STATUS_OFFSET			4	//The first single subdevice => bit 0 in ME6000_AO_SINGLE_STATUS_REG.
-
-#define ME6000_AO_04_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_04_SINGLE_REG					0x74	// _/W
-
-#define ME6000_AO_05_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_05_SINGLE_REG					0x78	// _/W
-
-#define ME6000_AO_06_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_06_SINGLE_REG					0x7C	// _/W
-
-#define ME6000_AO_07_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_07_SINGLE_REG					0x80	// _/W
-
-#define ME6000_AO_08_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_08_SINGLE_REG					0x84	// _/W
-
-#define ME6000_AO_09_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_09_SINGLE_REG					0x88	// _/W
-
-#define ME6000_AO_10_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_10_SINGLE_REG					0x8C	// _/W
-
-#define ME6000_AO_11_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_11_SINGLE_REG					0x90	// _/W
-
-#define ME6000_AO_12_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_12_SINGLE_REG					0x94	// _/W
-
-#define ME6000_AO_13_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_13_SINGLE_REG					0x98	// _/W
-
-#define ME6000_AO_14_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_14_SINGLE_REG					0x9C	// _/W
-
-#define ME6000_AO_15_STATUS_REG					ME6000_AO_SINGLE_STATUS_REG
-#define ME6000_AO_15_SINGLE_REG					0xA0	// _/W
-
-//ME6000_AO_CTRL_REG
-#define ME6000_AO_MODE_SINGLE					0x00
-#define ME6000_AO_MODE_WRAPAROUND				0x01
-#define ME6000_AO_MODE_CONTINUOUS				0x02
-#define ME6000_AO_CTRL_MODE_MASK				(ME6000_AO_MODE_WRAPAROUND | ME6000_AO_MODE_CONTINUOUS)
-
-#define ME6000_AO_CTRL_BIT_MODE_WRAPAROUND		0x001
-#define ME6000_AO_CTRL_BIT_MODE_CONTINUOUS		0x002
-#define ME6000_AO_CTRL_BIT_STOP					0x004
-#define ME6000_AO_CTRL_BIT_ENABLE_FIFO			0x008
-#define ME6000_AO_CTRL_BIT_ENABLE_EX_TRIG		0x010
-#define ME6000_AO_CTRL_BIT_EX_TRIG_EDGE			0x020
-#define ME6000_AO_CTRL_BIT_ENABLE_IRQ			0x040
-#define ME6000_AO_CTRL_BIT_IMMEDIATE_STOP		0x080
-#define ME6000_AO_CTRL_BIT_EX_TRIG_EDGE_BOTH 	0x800
-
-//ME6000_AO_STATUS_REG
-#define ME6000_AO_STATUS_BIT_FSM				0x01
-#define ME6000_AO_STATUS_BIT_FF					0x02
-#define ME6000_AO_STATUS_BIT_HF					0x04
-#define ME6000_AO_STATUS_BIT_EF					0x08
-
-#define ME6000_AO_PRELOAD_REG					0xA8	// R/W    ///ME6000_AO_SYNC_REG <==> ME6000_AO_PRELOAD_REG
-/*
-#define ME6000_AO_SYNC_HOLD_0					0x00000001
-#define ME6000_AO_SYNC_HOLD_1					0x00000002
-#define ME6000_AO_SYNC_HOLD_2					0x00000004
-#define ME6000_AO_SYNC_HOLD_3					0x00000008
-#define ME6000_AO_SYNC_HOLD_4					0x00000010
-#define ME6000_AO_SYNC_HOLD_5					0x00000020
-#define ME6000_AO_SYNC_HOLD_6					0x00000040
-#define ME6000_AO_SYNC_HOLD_7					0x00000080
-#define ME6000_AO_SYNC_HOLD_8					0x00000100
-#define ME6000_AO_SYNC_HOLD_9					0x00000200
-#define ME6000_AO_SYNC_HOLD_10					0x00000400
-#define ME6000_AO_SYNC_HOLD_11					0x00000800
-#define ME6000_AO_SYNC_HOLD_12					0x00001000
-#define ME6000_AO_SYNC_HOLD_13					0x00002000
-#define ME6000_AO_SYNC_HOLD_14					0x00004000
-#define ME6000_AO_SYNC_HOLD_15					0x00008000
-*/
-#define ME6000_AO_SYNC_HOLD						0x00000001
-/*
-#define ME6000_AO_SYNC_EXT_TRIG_0				0x00010000
-#define ME6000_AO_SYNC_EXT_TRIG_1				0x00020000
-#define ME6000_AO_SYNC_EXT_TRIG_2				0x00040000
-#define ME6000_AO_SYNC_EXT_TRIG_3				0x00080000
-#define ME6000_AO_SYNC_EXT_TRIG_4				0x00100000
-#define ME6000_AO_SYNC_EXT_TRIG_5				0x00200000
-#define ME6000_AO_SYNC_EXT_TRIG_6				0x00400000
-#define ME6000_AO_SYNC_EXT_TRIG_7				0x00800000
-#define ME6000_AO_SYNC_EXT_TRIG_8				0x01000000
-#define ME6000_AO_SYNC_EXT_TRIG_9				0x02000000
-#define ME6000_AO_SYNC_EXT_TRIG_10				0x04000000
-#define ME6000_AO_SYNC_EXT_TRIG_11				0x08000000
-#define ME6000_AO_SYNC_EXT_TRIG_12				0x10000000
-#define ME6000_AO_SYNC_EXT_TRIG_13				0x20000000
-#define ME6000_AO_SYNC_EXT_TRIG_14				0x40000000
-#define ME6000_AO_SYNC_EXT_TRIG_15				0x80000000
-*/
-#define ME6000_AO_SYNC_EXT_TRIG					0x00010000
-
-#define ME6000_AO_EXT_TRIG						0x80000000
-
-// AO-IRQ
-#define ME6000_AO_IRQ_STATUS_REG				0x60	// R/_
-#define ME6000_AO_00_IRQ_RESET_REG				0x64	// R/_
-#define ME6000_AO_01_IRQ_RESET_REG				0x68	// R/_
-#define ME6000_AO_02_IRQ_RESET_REG				0x6C	// R/_
-#define ME6000_AO_03_IRQ_RESET_REG				0x70	// R/_
-
-#define ME6000_IRQ_STATUS_BIT_0					0x01
-#define ME6000_IRQ_STATUS_BIT_1					0x02
-#define ME6000_IRQ_STATUS_BIT_2					0x04
-#define ME6000_IRQ_STATUS_BIT_3					0x08
-
-#define ME6000_IRQ_STATUS_BIT_AO_HF				ME6000_IRQ_STATUS_BIT_0
-
-//DUMY register
-#define ME6000_AO_DUMY									0xFC
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me6000_device.c b/drivers/staging/meilhaus/me6000_device.c
deleted file mode 100644
index 1a6cf7f..0000000
--- a/drivers/staging/meilhaus/me6000_device.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/**
- * @file me6000_device.c
- *
- * @brief Device class template implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "mefirmware.h"
-
-#include "mesubdevice.h"
-#include "medebug.h"
-#include "medevice.h"
-#include "me6000_reg.h"
-#include "me6000_device.h"
-#include "meplx_reg.h"
-#include "me6000_dio.h"
-#include "me6000_ao.h"
-
-/**
- * @brief Global variable.
- * This is working queue for runing a separate atask that will be responsible for work status (start, stop, timeouts).
- */
-static struct workqueue_struct *me6000_workqueue;
-
-me_device_t *me6000_pci_constructor(struct pci_dev *pci_device)
-{
-	me6000_device_t *me6000_device;
-	me_subdevice_t *subdevice;
-	unsigned int version_idx;
-	int err;
-	int i;
-	int high_range = 0;
-	int fifo;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me6000_device = kmalloc(sizeof(me6000_device_t), GFP_KERNEL);
-
-	if (!me6000_device) {
-		PERROR("Cannot get memory for device instance.\n");
-		return NULL;
-	}
-
-	memset(me6000_device, 0, sizeof(me6000_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me6000_device, pci_device);
-
-	if (err) {
-		kfree(me6000_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-
-	/* Download the xilinx firmware */
-	err = me_xilinx_download(me6000_device->base.info.pci.reg_bases[1],
-				 me6000_device->base.info.pci.reg_bases[2],
-				 &pci_device->dev, "me6000.bin");
-
-	if (err) {
-		me_device_deinit((me_device_t *) me6000_device);
-		kfree(me6000_device);
-		PERROR("Can't download firmware.\n");
-		return NULL;
-	}
-
-	/* Get the index in the device version information table. */
-	version_idx =
-	    me6000_versions_get_device_index(me6000_device->base.info.pci.
-					     device_id);
-
-	// Initialize spin lock .
-	spin_lock_init(&me6000_device->preload_reg_lock);
-	spin_lock_init(&me6000_device->dio_ctrl_reg_lock);
-
-	/* Create digital input/output instances. */
-	for (i = 0; i < me6000_versions[version_idx].dio_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me6000_dio_constructor(me6000_device->
-							      base.info.pci.
-							      reg_bases[3], i,
-							      &me6000_device->
-							      dio_ctrl_reg_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me6000_device);
-			kfree(me6000_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me6000_device->base.slist,
-					    subdevice);
-	}
-
-	/* Create analog output instances. */
-	for (i = 0; i < me6000_versions[version_idx].ao_subdevices; i++) {
-		high_range = ((i == 8)
-			      &&
-			      ((me6000_device->base.info.pci.device_id ==
-				PCI_DEVICE_ID_MEILHAUS_ME6359)
-			       || (me6000_device->base.info.pci.device_id ==
-				   PCI_DEVICE_ID_MEILHAUS_ME6259)
-			      )
-		    )? 1 : 0;
-
-		fifo =
-		    (i <
-		     me6000_versions[version_idx].
-		     ao_fifo) ? ME6000_AO_HAS_FIFO : 0x0;
-		fifo |= (i < 4) ? ME6000_AO_EXTRA_HARDWARE : 0x0;
-
-		subdevice =
-		    (me_subdevice_t *) me6000_ao_constructor(me6000_device->
-							     base.info.pci.
-							     reg_bases[2],
-							     &me6000_device->
-							     preload_reg_lock,
-							     &me6000_device->
-							     preload_flags,
-							     &me6000_device->
-							     triggering_flags,
-							     i, fifo,
-							     me6000_device->
-							     base.irq,
-							     high_range,
-							     me6000_workqueue);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me6000_device);
-			kfree(me6000_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me6000_device->base.slist,
-					    subdevice);
-	}
-
-	return (me_device_t *) me6000_device;
-}
-EXPORT_SYMBOL(me6000_pci_constructor);
-
-// Init and exit of module.
-
-static int __init me6000_init(void)
-{
-	PDEBUG("executed.\n");
-
-	me6000_workqueue = create_singlethread_workqueue("me6000");
-	return 0;
-}
-
-static void __exit me6000_exit(void)
-{
-	PDEBUG("executed.\n");
-
-	flush_workqueue(me6000_workqueue);
-	destroy_workqueue(me6000_workqueue);
-}
-
-module_init(me6000_init);
-module_exit(me6000_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR
-    ("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx> & Krzysztof Gantzke <k.gantzke@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for ME-6000 Device");
-MODULE_SUPPORTED_DEVICE("Meilhaus ME-6000 Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me6000_device.h b/drivers/staging/meilhaus/me6000_device.h
deleted file mode 100644
index eed4011..0000000
--- a/drivers/staging/meilhaus/me6000_device.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/**
- * @file me6000_device.h
- *
- * @brief ME-6000 device class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME6000_DEVICE_H
-#define _ME6000_DEVICE_H
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure holding ME-6000 device capabilities.
- */
-typedef struct me6000_version {
-	uint16_t device_id;
-	unsigned int dio_subdevices;
-	unsigned int ao_subdevices;
-	unsigned int ao_fifo;	//How many devices have FIFO
-} me6000_version_t;
-
-/**
- * @brief ME-6000 device capabilities.
- */
-static me6000_version_t me6000_versions[] = {
-	{PCI_DEVICE_ID_MEILHAUS_ME6004, 0, 4, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME6008, 0, 8, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME600F, 0, 16, 0},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6014, 0, 4, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME6018, 0, 8, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME601F, 0, 16, 0},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6034, 0, 4, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME6038, 0, 8, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME603F, 0, 16, 0},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6104, 0, 4, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME6108, 0, 8, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME610F, 0, 16, 4},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6114, 0, 4, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME6118, 0, 8, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME611F, 0, 16, 4},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6134, 0, 4, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME6138, 0, 8, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME613F, 0, 16, 4},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6044, 2, 4, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME6048, 2, 8, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME604F, 2, 16, 0},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6054, 2, 4, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME6058, 2, 8, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME605F, 2, 16, 0},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6074, 2, 4, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME6078, 2, 8, 0},
-	{PCI_DEVICE_ID_MEILHAUS_ME607F, 2, 16, 0},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6144, 2, 4, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME6148, 2, 8, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME614F, 2, 16, 4},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6154, 2, 4, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME6158, 2, 8, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME615F, 2, 16, 4},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6174, 2, 4, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME6178, 2, 8, 4},
-	{PCI_DEVICE_ID_MEILHAUS_ME617F, 2, 16, 4},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6259, 2, 9, 0},
-
-	{PCI_DEVICE_ID_MEILHAUS_ME6359, 2, 9, 4},
-
-	{0},
-};
-
-#define ME6000_DEVICE_VERSIONS (ARRAY_SIZE(me6000_versions) - 1)	/**< Returns the number of entries in #me6000_versions. */
-
-/**
- * @brief Returns the index of the device entry in #me6000_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #me6000_versions.
- */
-static inline unsigned int me6000_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < ME6000_DEVICE_VERSIONS; i++)
-		if (me6000_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-/**
- * @brief The ME-6000 device class structure.
- */
-typedef struct me6000_device {
-	me_device_t base;			/**< The Meilhaus device base class. */
-
-	/* Child class attributes. */
-	spinlock_t preload_reg_lock;		/**< Guards the preload register. */
-	uint32_t preload_flags;
-	uint32_t triggering_flags;
-
-	spinlock_t dio_ctrl_reg_lock;
-} me6000_device_t;
-
-/**
- * @brief The ME-6000 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-6000 device instance. \n
- *         NULL on error.
- */
-me_device_t *me6000_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me6000_dio.c b/drivers/staging/meilhaus/me6000_dio.c
deleted file mode 100644
index c90686e..0000000
--- a/drivers/staging/meilhaus/me6000_dio.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/**
- * @file me6000_dio.c
- *
- * @brief ME-6000 digital input/output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me6000_dio_reg.h"
-#include "me6000_dio.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me6000_dio_io_reset_subdevice(struct me_subdevice *subdevice,
-					 struct file *filep, int flags)
-{
-	me6000_dio_subdevice_t *instance;
-	uint8_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me6000_dio_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inb(instance->ctrl_reg);
-	mode &= ~(0x3 << (instance->dio_idx * 2));
-	outb(mode, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, mode);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outb(0x00, instance->port_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, 0x00);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_dio_io_single_config(me_subdevice_t *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int single_config,
-				       int ref,
-				       int trig_chan,
-				       int trig_type, int trig_edge, int flags)
-{
-	me6000_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t mode;
-	int size =
-	    flags & (ME_IO_SINGLE_CONFIG_DIO_BIT | ME_IO_SINGLE_CONFIG_DIO_BYTE
-		     | ME_IO_SINGLE_CONFIG_DIO_WORD |
-		     ME_IO_SINGLE_CONFIG_DIO_DWORD);
-
-	PDEBUG("executed.\n");
-
-	instance = (me6000_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inb(instance->ctrl_reg);
-	switch (size) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-				mode &=
-				    ~((ME6000_DIO_CTRL_BIT_MODE_0 |
-				       ME6000_DIO_CTRL_BIT_MODE_1) <<
-				      (instance->dio_idx * 2));
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-				mode &=
-				    ~((ME6000_DIO_CTRL_BIT_MODE_0 |
-				       ME6000_DIO_CTRL_BIT_MODE_1) <<
-				      (instance->dio_idx * 2));
-				mode |=
-				    ME6000_DIO_CTRL_BIT_MODE_0 << (instance->
-								   dio_idx * 2);
-			} else {
-				PERROR
-				    ("Invalid port configuration specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!err) {
-		outb(mode, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, mode);
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_dio_io_single_read(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int *value, int time_out, int flags)
-{
-	me6000_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me6000_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME6000_DIO_CTRL_BIT_MODE_0 |
-					      ME6000_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-			if ((mode ==
-			     (ME6000_DIO_CTRL_BIT_MODE_0 <<
-			      (instance->dio_idx * 2))) || !mode) {
-				*value =
-				    inb(instance->port_reg) & (0x1 << channel);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME6000_DIO_CTRL_BIT_MODE_0 |
-					      ME6000_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-			if ((mode ==
-			     (ME6000_DIO_CTRL_BIT_MODE_0 <<
-			      (instance->dio_idx * 2))) || !mode) {
-				*value = inb(instance->port_reg) & 0x00FF;
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_dio_io_single_write(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int value, int time_out, int flags)
-{
-	me6000_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t mode;
-	uint8_t byte;
-
-	PDEBUG("executed.\n");
-
-	instance = (me6000_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME6000_DIO_CTRL_BIT_MODE_0 |
-					      ME6000_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-
-			if (mode ==
-			    (ME6000_DIO_CTRL_BIT_MODE_0 <<
-			     (instance->dio_idx * 2))) {
-				byte = inb(instance->port_reg) & 0x00FF;
-
-				if (value)
-					byte |= 0x1 << channel;
-				else
-					byte &= ~(0x1 << channel);
-
-				outb(byte, instance->port_reg);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME6000_DIO_CTRL_BIT_MODE_0 |
-					      ME6000_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-
-			if (mode ==
-			    (ME6000_DIO_CTRL_BIT_MODE_0 <<
-			     (instance->dio_idx * 2))) {
-				outb(value, instance->port_reg);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me6000_dio_query_number_channels(me_subdevice_t *subdevice,
-					    int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_dio_query_subdevice_type(me_subdevice_t *subdevice,
-					   int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DIO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me6000_dio_query_subdevice_caps(me_subdevice_t *subdevice,
-					   int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_DIO_DIR_BYTE;
-	return ME_ERRNO_SUCCESS;
-}
-
-me6000_dio_subdevice_t *me6000_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t *ctrl_reg_lock)
-{
-	me6000_dio_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me6000_dio_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me6000_dio_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-
-	/* Set the subdevice ports */
-	subdevice->ctrl_reg = reg_base + ME6000_DIO_CTRL_REG;
-	switch (dio_idx) {
-	case 0:
-		subdevice->port_reg = reg_base + ME6000_DIO_PORT_0_REG;
-		break;
-	case 1:
-		subdevice->port_reg = reg_base + ME6000_DIO_PORT_1_REG;
-		break;
-	default:
-		err = ME_ERRNO_INVALID_SUBDEVICE;
-	}
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save digital i/o index */
-	subdevice->dio_idx = dio_idx;
-
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me6000_dio_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me6000_dio_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me6000_dio_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me6000_dio_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me6000_dio_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me6000_dio_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me6000_dio_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me6000_dio.h b/drivers/staging/meilhaus/me6000_dio.h
deleted file mode 100644
index 858bec1..0000000
--- a/drivers/staging/meilhaus/me6000_dio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/**
- * @file me6000_dio.h
- *
- * @brief ME-6000 digital input/output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME6000_DIO_H_
-#define _ME6000_DIO_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me6000_dio_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg from concurrent access. */
-	unsigned int dio_idx;			/**< The index of the digital i/o on the device. */
-
-	unsigned long port_reg;			/**< Register holding the port status. */
-	unsigned long ctrl_reg;			/**< Register to configure the port direction. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me6000_dio_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-6000 digital input/ouput subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param dio_idx The index of the digital i/o port on the device.
- * @param ctrl_reg_lock Spin lock protecting the control register.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me6000_dio_subdevice_t *me6000_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me6000_dio_reg.h b/drivers/staging/meilhaus/me6000_dio_reg.h
deleted file mode 100644
index e67a791..0000000
--- a/drivers/staging/meilhaus/me6000_dio_reg.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/**
- * @file me6000_dio_reg.h
- *
- * @brief ME-6000 digital input/output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME6000_DIO_REG_H_
-#define _ME6000_DIO_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME6000_DIO_CTRL_REG				0x00	// R/W
-#define ME6000_DIO_PORT_0_REG			0x01	// R/W
-#define ME6000_DIO_PORT_1_REG			0x02	// R/W
-#define ME6000_DIO_PORT_REG				ME6000_DIO_PORT_0_REG	// R/W
-
-#define ME6000_DIO_CTRL_BIT_MODE_0		0x01
-#define ME6000_DIO_CTRL_BIT_MODE_1		0x02
-#define ME6000_DIO_CTRL_BIT_MODE_2		0x04
-#define ME6000_DIO_CTRL_BIT_MODE_3		0x08
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me6000_reg.h b/drivers/staging/meilhaus/me6000_reg.h
deleted file mode 100644
index d352730..0000000
--- a/drivers/staging/meilhaus/me6000_reg.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/**
- * @file me6000_reg.h
- *
- * @brief ME-6000 device register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME6000_REG_H_
-#define _ME6000_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME6000_INIT_XILINX_REG		0xAC	// R/-
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8100_device.c b/drivers/staging/meilhaus/me8100_device.c
deleted file mode 100644
index 41a9345..0000000
--- a/drivers/staging/meilhaus/me8100_device.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/**
- * @file me8100_device.c
- *
- * @brief ME-8100 device class implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-#include "medevice.h"
-#include "me8100_device.h"
-#include "mesubdevice.h"
-#include "me8100_di.h"
-#include "me8100_do.h"
-#include "me8254.h"
-
-me_device_t *me8100_pci_constructor(struct pci_dev *pci_device)
-{
-	me8100_device_t *me8100_device;
-	me_subdevice_t *subdevice;
-	unsigned int version_idx;
-	int err;
-	int i;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me8100_device = kmalloc(sizeof(me8100_device_t), GFP_KERNEL);
-
-	if (!me8100_device) {
-		PERROR("Cannot get memory for device instance.\n");
-		return NULL;
-	}
-
-	memset(me8100_device, 0, sizeof(me8100_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me8100_device, pci_device);
-
-	if (err) {
-		kfree(me8100_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-
-	/* Get the index in the device version information table. */
-	version_idx =
-	    me8100_versions_get_device_index(me8100_device->base.info.pci.
-					     device_id);
-
-	// Initialize spin lock .
-	spin_lock_init(&me8100_device->dio_ctrl_reg_lock);
-	spin_lock_init(&me8100_device->ctr_ctrl_reg_lock);
-	spin_lock_init(&me8100_device->clk_src_reg_lock);
-
-	// Create subdevice instances.
-
-	for (i = 0; i < me8100_versions[version_idx].di_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me8100_di_constructor(me8100_device->
-							     base.info.pci.
-							     reg_bases[2],
-							     me8100_device->
-							     base.info.pci.
-							     reg_bases[1], i,
-							     me8100_device->
-							     base.irq,
-							     &me8100_device->
-							     dio_ctrl_reg_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me8100_device);
-			kfree(me8100_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me8100_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me8100_versions[version_idx].do_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me8100_do_constructor(me8100_device->
-							     base.info.pci.
-							     reg_bases[2], i,
-							     &me8100_device->
-							     dio_ctrl_reg_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me8100_device);
-			kfree(me8100_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me8100_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me8100_versions[version_idx].ctr_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me8254_constructor(me8100_device->base.
-							  info.pci.device_id,
-							  me8100_device->base.
-							  info.pci.reg_bases[2],
-							  0, i,
-							  &me8100_device->
-							  ctr_ctrl_reg_lock,
-							  &me8100_device->
-							  clk_src_reg_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me8100_device);
-			kfree(me8100_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me8100_device->base.slist,
-					    subdevice);
-	}
-
-	return (me_device_t *) me8100_device;
-}
-EXPORT_SYMBOL(me8100_pci_constructor);
-
-// Init and exit of module.
-
-static int __init me8100_init(void)
-{
-	PDEBUG("executed.\n.");
-	return ME_ERRNO_SUCCESS;
-}
-
-static void __exit me8100_exit(void)
-{
-	PDEBUG("executed.\n.");
-}
-
-module_init(me8100_init);
-
-module_exit(me8100_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for Template Device");
-MODULE_SUPPORTED_DEVICE("Meilhaus Template Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me8100_device.h b/drivers/staging/meilhaus/me8100_device.h
deleted file mode 100644
index 238dc06..0000000
--- a/drivers/staging/meilhaus/me8100_device.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/**
- * @file me8100_device.h
- *
- * @brief ME-8100 device class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8100_DEVICE_H
-#define _ME8100_DEVICE_H
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure holding ME-8100 device capabilities.
- */
-typedef struct me8100_version {
-	uint16_t device_id;
-	unsigned int di_subdevices;
-	unsigned int do_subdevices;
-	unsigned int ctr_subdevices;
-} me8100_version_t;
-
-/**
- * @brief Device capabilities.
- */
-static me8100_version_t me8100_versions[] = {
-	{PCI_DEVICE_ID_MEILHAUS_ME8100_A, 1, 1, 3},
-	{PCI_DEVICE_ID_MEILHAUS_ME8100_B, 2, 2, 3},
-	{0},
-};
-
-#define ME8100_DEVICE_VERSIONS (ARRAY_SIZE(me8100_versions) - 1)	/**< Returns the number of entries in #me8100_versions. */
-
-/**
- * @brief Returns the index of the device entry in #me8100_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #me8100_versions.
- */
-static inline unsigned int me8100_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < ME8100_DEVICE_VERSIONS; i++)
-		if (me8100_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-/**
- * @brief The ME-8100 device class structure.
- */
-typedef struct me8100_device {
-	me_device_t base;			/**< The Meilhaus device base class. */
-
-	/* Child class attributes. */
-	spinlock_t dio_ctrl_reg_lock;
-	spinlock_t ctr_ctrl_reg_lock;
-	spinlock_t clk_src_reg_lock;
-} me8100_device_t;
-
-/**
- * @brief The ME-8100 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-8100 device instance. \n
- *         NULL on error.
- */
-me_device_t *me8100_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8100_di.c b/drivers/staging/meilhaus/me8100_di.c
deleted file mode 100644
index 1a3f269..0000000
--- a/drivers/staging/meilhaus/me8100_di.c
+++ /dev/null
@@ -1,684 +0,0 @@
-/**
- * @file me8100_di.c
- *
- * @brief ME-8100 digital input subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-#include "medefines.h"
-#include "meerror.h"
-
-#include "meids.h"
-#include "medebug.h"
-#include "meplx_reg.h"
-#include "me8100_reg.h"
-#include "me8100_di_reg.h"
-#include "me8100_di.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me8100_di_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags)
-{
-	me8100_di_subdevice_t *instance;
-	unsigned short ctrl;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_di_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->ctrl_reg_lock);
-	ctrl = inw(instance->ctrl_reg);
-	ctrl &= ~(ME8100_DIO_CTRL_BIT_INTB_1 | ME8100_DIO_CTRL_BIT_INTB_0);
-	outw(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outw(0, instance->mask_reg);
-	PDEBUG_REG("mask_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->mask_reg - instance->reg_base, 0);
-	outw(0, instance->pattern_reg);
-	PDEBUG_REG("pattern_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->pattern_reg - instance->reg_base, 0);
-	instance->rised = -1;
-	instance->irq_count = 0;
-	instance->filtering_flag = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	outl(PLX_INTCSR_LOCAL_INT1_EN |
-	     PLX_INTCSR_LOCAL_INT1_POL |
-	     PLX_INTCSR_LOCAL_INT2_EN |
-	     PLX_INTCSR_LOCAL_INT2_POL |
-	     PLX_INTCSR_PCI_INT_EN, instance->irq_status_reg);
-	PDEBUG_REG("plx:irq_status_reg outl(0x%lX)=0x%x\n",
-		   instance->irq_status_reg,
-		   PLX_INTCSR_LOCAL_INT1_EN | PLX_INTCSR_LOCAL_INT1_POL |
-		   PLX_INTCSR_LOCAL_INT2_EN | PLX_INTCSR_LOCAL_INT2_POL |
-		   PLX_INTCSR_PCI_INT_EN);
-
-	wake_up_interruptible_all(&instance->wait_queue);
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8100_di_io_irq_start(me_subdevice_t *subdevice,
-				  struct file *filep,
-				  int channel,
-				  int irq_source,
-				  int irq_edge, int irq_arg, int flags)
-{
-	me8100_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint16_t ctrl;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_di_subdevice_t *) subdevice;
-
-	if (irq_source == ME_IRQ_SOURCE_DIO_PATTERN) {
-		if (flags &
-		    ~(ME_IO_IRQ_START_PATTERN_FILTERING |
-		      ME_IO_IRQ_START_DIO_WORD)) {
-			PERROR("Invalid flag specified.\n");
-			return ME_ERRNO_INVALID_FLAGS;
-		}
-
-		if (irq_edge != ME_IRQ_EDGE_NOT_USED) {
-			PERROR("Invalid irq edge specified.\n");
-			return ME_ERRNO_INVALID_IRQ_EDGE;
-		}
-	} else if (irq_source == ME_IRQ_SOURCE_DIO_MASK) {
-		if (flags &
-		    ~(ME_IO_IRQ_START_EXTENDED_STATUS |
-		      ME_IO_IRQ_START_DIO_WORD)) {
-			PERROR("Invalid flag specified.\n");
-			return ME_ERRNO_INVALID_FLAGS;
-		}
-
-		if (irq_edge != ME_IRQ_EDGE_ANY) {
-			PERROR("Invalid irq edge specified.\n");
-			return ME_ERRNO_INVALID_IRQ_EDGE;
-		}
-
-		if (!(irq_arg & 0xFFFF)) {
-			PERROR("No mask specified.\n");
-			return ME_ERRNO_INVALID_IRQ_ARG;
-		}
-	} else {
-		PERROR("Invalid irq source specified.\n");
-		return ME_ERRNO_INVALID_IRQ_SOURCE;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	if (irq_source == ME_IRQ_SOURCE_DIO_PATTERN) {
-		outw(irq_arg, instance->pattern_reg);
-		instance->compare_value = irq_arg;
-		instance->filtering_flag =
-		    (flags & ME_IO_IRQ_START_PATTERN_FILTERING) ? 1 : 0;
-	}
-	if (irq_source == ME_IRQ_SOURCE_DIO_MASK) {
-		outw(irq_arg, instance->mask_reg);
-	}
-
-	spin_lock(instance->ctrl_reg_lock);
-	ctrl = inw(instance->ctrl_reg);
-	ctrl |= ME8100_DIO_CTRL_BIT_INTB_0;
-	if (irq_source == ME_IRQ_SOURCE_DIO_PATTERN) {
-		ctrl &= ~ME8100_DIO_CTRL_BIT_INTB_1;
-	}
-
-	if (irq_source == ME_IRQ_SOURCE_DIO_MASK) {
-		ctrl |= ME8100_DIO_CTRL_BIT_INTB_1;
-	}
-	outw(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	instance->rised = 0;
-	instance->status_value = 0;
-	instance->status_value_edges = 0;
-	instance->line_value = inw(instance->port_reg);
-	instance->status_flag = flags & ME_IO_IRQ_START_EXTENDED_STATUS;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8100_di_io_irq_wait(me_subdevice_t *subdevice,
-				 struct file *filep,
-				 int channel,
-				 int *irq_count,
-				 int *value, int time_out, int flags)
-{
-	me8100_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	long t = 0;
-	unsigned long cpu_flags;
-	int count;
-
-	PDEBUG("executed.\n");
-	PDEVELOP("PID: %d.\n", current->pid);
-
-	instance = (me8100_di_subdevice_t *) subdevice;
-
-	if (flags &
-	    ~(ME_IO_IRQ_WAIT_NORMAL_STATUS | ME_IO_IRQ_WAIT_EXTENDED_STATUS)) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		t = (time_out * HZ) / 1000;
-
-		if (t == 0)
-			t = 1;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (instance->rised <= 0) {
-		instance->rised = 0;
-		count = instance->irq_count;
-
-		if (time_out) {
-			t = wait_event_interruptible_timeout(instance->
-							     wait_queue,
-							     ((count !=
-							       instance->
-							       irq_count)
-							      || (instance->
-								  rised < 0)),
-							     t);
-//                      t = wait_event_interruptible_timeout(instance->wait_queue, (instance->rised != 0), t);
-			if (t == 0) {
-				PERROR("Wait on interrupt timed out.\n");
-				err = ME_ERRNO_TIMEOUT;
-			}
-		} else {
-			wait_event_interruptible(instance->wait_queue,
-						 ((count != instance->irq_count)
-						  || (instance->rised < 0)));
-//                      wait_event_interruptible(instance->wait_queue, (instance->rised != 0));
-		}
-
-		if (instance->rised < 0) {
-			PERROR("Wait on interrupt aborted by user.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-	}
-
-	if (signal_pending(current)) {
-		PERROR("Wait on interrupt aborted by signal.\n");
-		err = ME_ERRNO_SIGNAL;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	*irq_count = instance->irq_count;
-	if (!err) {
-		if (flags & ME_IO_IRQ_WAIT_NORMAL_STATUS) {
-			*value = instance->status_value;
-		} else if (flags & ME_IO_IRQ_WAIT_EXTENDED_STATUS) {
-			*value = instance->status_value_edges;
-		} else {	// Use default
-			if (!instance->status_flag) {
-				*value = instance->status_value;
-			} else {
-				*value = instance->status_value_edges;
-			}
-		}
-		instance->rised = 0;
-/*
-			instance->status_value = 0;
-			instance->status_value_edges = 0;
-*/
-	} else {
-		*value = 0;
-	}
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8100_di_io_irq_stop(me_subdevice_t *subdevice,
-				 struct file *filep, int channel, int flags)
-{
-	me8100_di_subdevice_t *instance;
-	uint16_t ctrl;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_di_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->ctrl_reg_lock);
-	ctrl = inw(instance->ctrl_reg);
-	ctrl &= ~(ME8100_DIO_CTRL_BIT_INTB_1 | ME8100_DIO_CTRL_BIT_INTB_0);
-	outw(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock(instance->ctrl_reg_lock);
-	instance->rised = -1;
-	instance->status_value = 0;
-	instance->status_value_edges = 0;
-	instance->filtering_flag = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8100_di_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me8100_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_di_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_WORD:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-			} else {
-				PERROR
-				    ("Invalid port configuration specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8100_di_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me8100_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_di_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-
-	switch (flags) {
-
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 16)) {
-			*value = inw(instance->port_reg) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = inw(instance->port_reg) & 0xFF;
-		} else if (channel == 1) {
-			*value = (inw(instance->port_reg) >> 8) & 0xFF;
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_WORD:
-		if (channel == 0) {
-			*value = inw(instance->port_reg);
-		} else {
-			PERROR("Invalid word number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8100_di_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 16;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8100_di_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DI;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8100_di_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_DIO_BIT_PATTERN_IRQ | ME_CAPS_DIO_BIT_MASK_IRQ_EDGE_ANY;
-	return ME_ERRNO_SUCCESS;
-}
-
-static void me8100_di_destructor(struct me_subdevice *subdevice)
-{
-	me8100_di_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_di_subdevice_t *) subdevice;
-
-	free_irq(instance->irq, (void *)instance);
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-static irqreturn_t me8100_isr(int irq, void *dev_id)
-{
-	me8100_di_subdevice_t *instance;
-	uint32_t icsr;
-
-	uint16_t irq_status;
-	uint16_t line_value = 0;
-
-	uint32_t status_val = 0;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_di_subdevice_t *) dev_id;
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	icsr = inl(instance->irq_status_reg);
-	if (instance->di_idx == 0) {
-
-		if ((icsr &
-		     (PLX_INTCSR_LOCAL_INT1_STATE | PLX_INTCSR_PCI_INT_EN |
-		      PLX_INTCSR_LOCAL_INT1_EN)) !=
-		    (PLX_INTCSR_LOCAL_INT1_STATE | PLX_INTCSR_PCI_INT_EN |
-		     PLX_INTCSR_LOCAL_INT1_EN)) {
-			PINFO
-			    ("%ld Shared interrupt. %s(): idx=0 plx:irq_status_reg=0x%04X\n",
-			     jiffies, __func__, icsr);
-			return IRQ_NONE;
-		}
-	} else if (instance->di_idx == 1) {
-		if ((icsr &
-		     (PLX_INTCSR_LOCAL_INT2_STATE | PLX_INTCSR_PCI_INT_EN |
-		      PLX_INTCSR_LOCAL_INT2_EN)) !=
-		    (PLX_INTCSR_LOCAL_INT2_STATE | PLX_INTCSR_PCI_INT_EN |
-		     PLX_INTCSR_LOCAL_INT2_EN)) {
-			PINFO
-			    ("%ld Shared interrupt. %s(): idx=1 plx:irq_status_reg=0x%04X\n",
-			     jiffies, __func__, icsr);
-			return IRQ_NONE;
-		}
-	} else {
-		PERROR("%s():Wrong interrupt idx=%d csr=0x%X.\n", __func__,
-		       instance->di_idx, icsr);
-		return IRQ_NONE;
-	}
-
-	PDEBUG("me8100_isr():Interrupt from idx=%d occured.\n",
-	       instance->di_idx);
-	spin_lock(&instance->subdevice_lock);
-	inw(instance->irq_reset_reg);
-	line_value = inw(instance->port_reg);
-
-	irq_status = instance->line_value ^ line_value;
-
-	// Make extended information.
-	status_val |= (0x00FF & (~(uint16_t) instance->line_value & line_value)) << 16;	//Raise
-	status_val |= (0x00FF & ((uint16_t) instance->line_value & ~line_value));	//Fall
-
-	instance->line_value = line_value;
-
-	if (instance->rised == 0) {
-		instance->status_value = irq_status;
-		instance->status_value_edges = status_val;
-	} else {
-		instance->status_value |= irq_status;
-		instance->status_value_edges |= status_val;
-	}
-
-	if (instance->filtering_flag) {	// For compare mode only.
-		if (instance->compare_value == instance->line_value) {
-			instance->rised = 1;
-			instance->irq_count++;
-		}
-	} else {
-		instance->rised = 1;
-		instance->irq_count++;
-	}
-
-	spin_unlock(&instance->subdevice_lock);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return IRQ_HANDLED;
-}
-
-me8100_di_subdevice_t *me8100_di_constructor(uint32_t me8100_reg_base,
-					     uint32_t plx_reg_base,
-					     unsigned int di_idx,
-					     int irq,
-					     spinlock_t *ctrl_reg_lock)
-{
-	me8100_di_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me8100_di_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me8100_di_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save the subdevice index. */
-	subdevice->di_idx = di_idx;
-
-	/* Initialize wait queue */
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	/* Register interrupt service routine. */
-	subdevice->irq = irq;
-	err = request_irq(subdevice->irq, me8100_isr,
-			  IRQF_DISABLED | IRQF_SHARED,
-			  ME8100_NAME, (void *)subdevice);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	PINFO("Registered irq=%d.\n", subdevice->irq);
-
-	/* Initialize the registers */
-	subdevice->ctrl_reg =
-	    me8100_reg_base + ME8100_CTRL_REG_A + di_idx * ME8100_REG_OFFSET;
-	subdevice->port_reg =
-	    me8100_reg_base + ME8100_DI_REG_A + di_idx * ME8100_REG_OFFSET;
-	subdevice->mask_reg =
-	    me8100_reg_base + ME8100_MASK_REG_A + di_idx * ME8100_REG_OFFSET;
-	subdevice->pattern_reg =
-	    me8100_reg_base + ME8100_PATTERN_REG_A + di_idx * ME8100_REG_OFFSET;
-	subdevice->din_int_reg =
-	    me8100_reg_base + ME8100_INT_DI_REG_A + di_idx * ME8100_REG_OFFSET;
-	subdevice->irq_reset_reg =
-	    me8100_reg_base + ME8100_RES_INT_REG_A + di_idx * ME8100_REG_OFFSET;
-	subdevice->irq_status_reg = plx_reg_base + PLX_INTCSR;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = me8100_reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_irq_start = me8100_di_io_irq_start;
-	subdevice->base.me_subdevice_io_irq_wait = me8100_di_io_irq_wait;
-	subdevice->base.me_subdevice_io_irq_stop = me8100_di_io_irq_stop;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me8100_di_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me8100_di_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me8100_di_io_single_read;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me8100_di_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me8100_di_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me8100_di_query_subdevice_caps;
-	subdevice->base.me_subdevice_destructor = me8100_di_destructor;
-
-	subdevice->rised = 0;
-	subdevice->irq_count = 0;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me8100_di.h b/drivers/staging/meilhaus/me8100_di.h
deleted file mode 100644
index e1db791..0000000
--- a/drivers/staging/meilhaus/me8100_di.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/**
- * @file me8100_di.h
- *
- * @brief ME-8100 digital input subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8100_DI_H_
-#define _ME8100_DI_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me8100_di_subdevice {
-	// Inheritance
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;
-
-	unsigned di_idx;
-
-	int irq;
-	volatile int rised;
-	unsigned int irq_count;
-
-	uint status_flag;				/**< Default interupt status flag */
-	uint status_value;				/**< Interupt status */
-	uint status_value_edges;		/**< Extended interupt status */
-	uint line_value;
-
-	uint16_t compare_value;
-	uint8_t filtering_flag;
-
-	wait_queue_head_t wait_queue;
-
-	unsigned long ctrl_reg;
-	unsigned long port_reg;
-	unsigned long mask_reg;
-	unsigned long pattern_reg;
-	unsigned long long din_int_reg;
-	unsigned long irq_reset_reg;
-	unsigned long irq_status_reg;
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-
-} me8100_di_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-8100 digital input subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me8100_di_subdevice_t *me8100_di_constructor(uint32_t me8100_reg_base,
-					     uint32_t plx_reg_base,
-					     unsigned int di_idx,
-					     int irq,
-					     spinlock_t * ctrl_leg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8100_di_reg.h b/drivers/staging/meilhaus/me8100_di_reg.h
deleted file mode 100644
index 063bd19..0000000
--- a/drivers/staging/meilhaus/me8100_di_reg.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/**
- * @file me8100_di_reg.h
- *
- * @brief ME-8100 digital input subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8100_DI_REG_H_
-#define _ME8100_DI_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME8100_RES_INT_REG_A		0x02	//(r, )
-#define ME8100_DI_REG_A			0x04	//(r, )
-#define ME8100_PATTERN_REG_A		0x08	//( ,w)
-#define ME8100_MASK_REG_A		0x0A	//( ,w)
-#define ME8100_INT_DI_REG_A		0x0A	//(r, )
-
-#define ME8100_RES_INT_REG_B		0x0E	//(r, )
-#define ME8100_DI_REG_B			0x10	//(r, )
-#define ME8100_PATTERN_REG_B		0x14	//( ,w)
-#define ME8100_MASK_REG_B		0x16	//( ,w)
-#define ME8100_INT_DI_REG_B		0x16	//(r, )
-
-#define ME8100_REG_OFFSET		0x0C
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8100_do.c b/drivers/staging/meilhaus/me8100_do.c
deleted file mode 100644
index 81651a9..0000000
--- a/drivers/staging/meilhaus/me8100_do.c
+++ /dev/null
@@ -1,391 +0,0 @@
-/**
- * @file me8100_do.c
- *
- * @brief ME-8100 digital output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me8100_reg.h"
-#include "me8100_do_reg.h"
-#include "me8100_do.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me8100_do_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags)
-{
-	me8100_do_subdevice_t *instance;
-	uint16_t ctrl;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_do_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	ctrl = inw(instance->ctrl_reg);
-	ctrl &= ME8100_DIO_CTRL_BIT_INTB_1 | ME8100_DIO_CTRL_BIT_INTB_0;
-	outw(ctrl, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock(instance->ctrl_reg_lock);
-	outw(0, instance->port_reg);
-	instance->port_reg_mirror = 0;
-	PDEBUG_REG("port_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_reg - instance->reg_base, 0);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8100_do_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me8100_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	int config;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	config = inw(instance->ctrl_reg);
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_WORD:
-		if (channel == 0) {
-			if (single_config ==
-			    ME_SINGLE_CONFIG_DIO_HIGH_IMPEDANCE) {
-				config &= ~(ME8100_DIO_CTRL_BIT_ENABLE_DIO);
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_SINK) {
-				config |= ME8100_DIO_CTRL_BIT_ENABLE_DIO;
-				config &= ~ME8100_DIO_CTRL_BIT_SOURCE;
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_SOURCE) {
-				config |=
-				    ME8100_DIO_CTRL_BIT_ENABLE_DIO |
-				    ME8100_DIO_CTRL_BIT_SOURCE;
-			} else {
-				PERROR
-				    ("Invalid port configuration specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid word number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!err) {
-		outw(config, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outw(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, config);
-	}
-
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8100_do_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me8100_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 16)) {
-			*value = instance->port_reg_mirror & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = instance->port_reg_mirror & 0xFF;
-		} else if (channel == 1) {
-			*value = (instance->port_reg_mirror >> 8) & 0xFF;
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_WORD:
-		if (channel == 0) {
-			*value = instance->port_reg_mirror;
-		} else {
-			PERROR("Invalid word number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8100_do_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	me8100_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8100_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 16)) {
-			instance->port_reg_mirror =
-			    value ? (instance->
-				     port_reg_mirror | (0x1 << channel))
-			    : (instance->port_reg_mirror & ~(0x1 << channel));
-			outw(instance->port_reg_mirror, instance->port_reg);
-			PDEBUG_REG("port_reg outw(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->port_reg - instance->reg_base,
-				   instance->port_reg_mirror);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			instance->port_reg_mirror &= ~0xFF;
-			instance->port_reg_mirror |= value & 0xFF;
-			outw(instance->port_reg_mirror, instance->port_reg);
-			PDEBUG_REG("port_reg outw(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->port_reg - instance->reg_base,
-				   instance->port_reg_mirror);
-		} else if (channel == 1) {
-			instance->port_reg_mirror &= ~0xFF00;
-			instance->port_reg_mirror |= (value << 8) & 0xFF00;
-			outw(instance->port_reg_mirror, instance->port_reg);
-			PDEBUG_REG("port_reg outw(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->port_reg - instance->reg_base,
-				   instance->port_reg_mirror);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_WORD:
-		if (channel == 0) {
-			instance->port_reg_mirror = value;
-			outw(value, instance->port_reg);
-			PDEBUG_REG("port_reg outw(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->port_reg - instance->reg_base,
-				   value);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8100_do_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 16;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8100_do_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8100_do_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_DIO_SINK_SOURCE;
-	return ME_ERRNO_SUCCESS;
-}
-
-me8100_do_subdevice_t *me8100_do_constructor(uint32_t reg_base,
-					     unsigned int do_idx,
-					     spinlock_t *ctrl_reg_lock)
-{
-	me8100_do_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me8100_do_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me8100_do_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-
-	/* Initialize registers */
-	if (do_idx == 0) {
-		subdevice->port_reg = reg_base + ME8100_DO_REG_A;
-		subdevice->ctrl_reg = reg_base + ME8100_CTRL_REG_A;
-	} else if (do_idx == 1) {
-		subdevice->port_reg = reg_base + ME8100_DO_REG_B;
-		subdevice->ctrl_reg = reg_base + ME8100_CTRL_REG_B;
-	} else {
-		PERROR("Wrong subdevice idx=%d.\n", do_idx);
-		kfree(subdevice);
-		return NULL;
-	}
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save the subdevice index */
-	subdevice->do_idx = do_idx;
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me8100_do_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me8100_do_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me8100_do_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me8100_do_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me8100_do_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me8100_do_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me8100_do_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me8100_do.h b/drivers/staging/meilhaus/me8100_do.h
deleted file mode 100644
index acf8801..0000000
--- a/drivers/staging/meilhaus/me8100_do.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/**
- * @file me8100_do.h
- *
- * @brief ME-8100 digital output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8100_DO_H_
-#define _ME8100_DO_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me8100_do_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect the #ctrl_reg. */
-
-	unsigned int do_idx;
-
-	uint16_t port_reg_mirror;		/**< Mirror used to store current port register setting which is write only. */
-
-	unsigned long port_reg;			/**< Register holding the port status. */
-	unsigned long ctrl_reg;			/**< Control register. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me8100_do_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-8100 digital output subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param do_idx The index of the digital output subdevice on this device.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me8100_do_subdevice_t *me8100_do_constructor(uint32_t reg_base,
-					     unsigned int do_idx,
-					     spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8100_do_reg.h b/drivers/staging/meilhaus/me8100_do_reg.h
deleted file mode 100644
index 13a2380..0000000
--- a/drivers/staging/meilhaus/me8100_do_reg.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/**
- * @file me8100_ao_reg.h
- *
- * @brief ME-8100 analog output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8100_DO_REG_H_
-#define _ME8100_DO_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME8100_DO_REG_A			0x06	//( ,w)
-#define ME8100_DO_REG_B			0x12	//( ,w)
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8100_reg.h b/drivers/staging/meilhaus/me8100_reg.h
deleted file mode 100644
index d8c4b1c..0000000
--- a/drivers/staging/meilhaus/me8100_reg.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/**
- * @file me8100_reg.h
- *
- * @brief ME-8100 register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8100_REG_H_
-#define _ME8100_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME8100_CTRL_REG_A			0x00	//( ,w)
-#define ME8100_CTRL_REG_B			0x0C	//( ,w)
-
-#define ME8100_DIO_CTRL_BIT_SOURCE		0x10
-#define ME8100_DIO_CTRL_BIT_INTB_1		0x20
-#define ME8100_DIO_CTRL_BIT_INTB_0		0x40
-#define ME8100_DIO_CTRL_BIT_ENABLE_DIO		0x80
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8200_device.c b/drivers/staging/meilhaus/me8200_device.c
deleted file mode 100644
index b313679..0000000
--- a/drivers/staging/meilhaus/me8200_device.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/**
- * @file me8200_device.c
- *
- * @brief ME-8200 device class implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "meids.h"
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-#include "meplx_reg.h"
-#include "medevice.h"
-#include "me8200_device.h"
-#include "mesubdevice.h"
-#include "me8200_di.h"
-#include "me8200_do.h"
-#include "me8200_dio.h"
-
-me_device_t *me8200_pci_constructor(struct pci_dev *pci_device)
-{
-	me8200_device_t *me8200_device;
-	me_subdevice_t *subdevice;
-	unsigned int version_idx;
-	int err;
-	int i;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	me8200_device = kmalloc(sizeof(me8200_device_t), GFP_KERNEL);
-
-	if (!me8200_device) {
-		PERROR("Cannot get memory for device instance.\n");
-		return NULL;
-	}
-
-	memset(me8200_device, 0, sizeof(me8200_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) me8200_device, pci_device);
-
-	if (err) {
-		kfree(me8200_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-
-	/* Get the index in the device version information table. */
-	version_idx =
-	    me8200_versions_get_device_index(me8200_device->base.info.pci.
-					     device_id);
-
-	// Initialize spin lock .
-	spin_lock_init(&me8200_device->irq_ctrl_lock);
-	spin_lock_init(&me8200_device->irq_mode_lock);
-	spin_lock_init(&me8200_device->dio_ctrl_lock);
-
-	/* Setup the PLX interrupt configuration */
-	outl(PLX_INTCSR_LOCAL_INT1_EN |
-	     PLX_INTCSR_LOCAL_INT1_POL |
-	     PLX_INTCSR_LOCAL_INT2_EN |
-	     PLX_INTCSR_LOCAL_INT2_POL |
-	     PLX_INTCSR_PCI_INT_EN,
-	     me8200_device->base.info.pci.reg_bases[1] + PLX_INTCSR);
-
-	// Create subdevice instances.
-
-	for (i = 0; i < me8200_versions[version_idx].di_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me8200_di_constructor(me8200_device->
-							     base.info.pci.
-							     reg_bases[2], i,
-							     me8200_device->
-							     base.irq,
-							     &me8200_device->
-							     irq_ctrl_lock,
-							     &me8200_device->
-							     irq_mode_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me8200_device);
-			kfree(me8200_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me8200_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me8200_versions[version_idx].do_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me8200_do_constructor(me8200_device->
-							     base.info.pci.
-							     reg_bases[2], i,
-							     me8200_device->
-							     base.irq,
-							     &me8200_device->
-							     irq_mode_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me8200_device);
-			kfree(me8200_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me8200_device->base.slist,
-					    subdevice);
-	}
-
-	for (i = 0; i < me8200_versions[version_idx].dio_subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) me8200_dio_constructor(me8200_device->
-							      base.info.pci.
-							      reg_bases[2], i,
-							      &me8200_device->
-							      dio_ctrl_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) me8200_device);
-			kfree(me8200_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&me8200_device->base.slist,
-					    subdevice);
-	}
-
-	return (me_device_t *) me8200_device;
-}
-EXPORT_SYMBOL(me8200_pci_constructor);
-
-// Init and exit of module.
-
-static int __init me8200_init(void)
-{
-	PDEBUG("executed.\n.");
-	return 0;
-}
-
-static void __exit me8200_exit(void)
-{
-	PDEBUG("executed.\n.");
-}
-
-module_init(me8200_init);
-
-module_exit(me8200_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for Template Device");
-MODULE_SUPPORTED_DEVICE("Meilhaus Template Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/me8200_device.h b/drivers/staging/meilhaus/me8200_device.h
deleted file mode 100644
index 66f5084..0000000
--- a/drivers/staging/meilhaus/me8200_device.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/**
- * @file me8200_device.h
- *
- * @brief ME-8200 device class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8200_DEVICE_H
-#define _ME8200_DEVICE_H
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure holding ME-8200 device capabilities.
- */
-typedef struct me8200_version {
-	uint16_t device_id;
-	unsigned int di_subdevices;
-	unsigned int do_subdevices;
-	unsigned int dio_subdevices;
-} me8200_version_t;
-
-/**
- * @brief Device capabilities.
- */
-static me8200_version_t me8200_versions[] = {
-	{PCI_DEVICE_ID_MEILHAUS_ME8200_A, 1, 1, 2},
-	{PCI_DEVICE_ID_MEILHAUS_ME8200_B, 2, 2, 2},
-	{0},
-};
-
-#define ME8200_DEVICE_VERSIONS (ARRAY_SIZE(me8200_versions) - 1)	/**< Returns the number of entries in #me8200_versions. */
-
-/**
- * @brief Returns the index of the device entry in #me8200_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #me8200_versions.
- */
-static inline unsigned int me8200_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < ME8200_DEVICE_VERSIONS; i++)
-		if (me8200_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-/**
- * @brief The ME-8200 device class structure.
- */
-typedef struct me8200_device {
-	me_device_t base;		/**< The Meilhaus device base class. */
-
-	/* Child class attributes. */
-	spinlock_t irq_ctrl_lock;	/**< Lock for the interrupt control register. */
-	spinlock_t irq_mode_lock;	/**< Lock for the interrupt mode register. */
-	spinlock_t dio_ctrl_lock;	/**< Lock for the digital i/o control register. */
-} me8200_device_t;
-
-/**
- * @brief The ME-8200 device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new ME-8200 device instance. \n
- *         NULL on error.
- */
-me_device_t *me8200_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8200_di.c b/drivers/staging/meilhaus/me8200_di.c
deleted file mode 100644
index fd1af0f..0000000
--- a/drivers/staging/meilhaus/me8200_di.c
+++ /dev/null
@@ -1,832 +0,0 @@
-/**
- * @file me8200_di.c
- *
- * @brief ME-8200 digital input subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-///Includes
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-#include "medefines.h"
-#include "meerror.h"
-
-#include "meids.h"
-#include "medebug.h"
-#include "me8200_reg.h"
-#include "me8200_di_reg.h"
-#include "me8200_di.h"
-
-/// Defines
-static void me8200_di_destructor(struct me_subdevice *subdevice);
-static int me8200_di_io_irq_start(me_subdevice_t *subdevice,
-				  struct file *filep,
-				  int channel,
-				  int irq_source,
-				  int irq_edge, int irq_arg, int flags);
-static int me8200_di_io_irq_wait(me_subdevice_t *subdevice,
-				 struct file *filep,
-				 int channel,
-				 int *irq_count,
-				 int *value, int time_out, int flags);
-static int me8200_di_io_irq_stop(me_subdevice_t *subdevice,
-				 struct file *filep, int channel, int flags);
-static int me8200_di_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags);
-static int me8200_di_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags);
-static int me8200_di_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags);
-static int me8200_di_query_number_channels(me_subdevice_t *subdevice,
-					   int *number);
-static int me8200_di_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype);
-static int me8200_di_query_subdevice_caps(me_subdevice_t *subdevice,
-					  int *caps);
-static irqreturn_t me8200_isr(int irq, void *dev_id);
-static irqreturn_t me8200_isr_EX(int irq, void *dev_id);
-static void me8200_di_check_version(me8200_di_subdevice_t *instance,
-				    unsigned long addr);
-
-///Functions
-static int me8200_di_io_irq_start(me_subdevice_t *subdevice,
-				  struct file *filep,
-				  int channel,
-				  int irq_source,
-				  int irq_edge, int irq_arg, int flags)
-{
-	me8200_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	volatile uint8_t tmp;
-	unsigned long status;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_di_subdevice_t *) subdevice;
-
-	if (irq_source == ME_IRQ_SOURCE_DIO_PATTERN) {
-		if (flags &
-		    ~(ME_IO_IRQ_START_PATTERN_FILTERING |
-		      ME_IO_IRQ_START_DIO_BYTE)) {
-			PERROR("Invalid flag specified.\n");
-			return ME_ERRNO_INVALID_FLAGS;
-		}
-
-		if (irq_edge != ME_IRQ_EDGE_NOT_USED) {
-			PERROR("Invalid irq edge specified.\n");
-			return ME_ERRNO_INVALID_IRQ_EDGE;
-		}
-	} else if (irq_source == ME_IRQ_SOURCE_DIO_MASK) {
-		if (flags &
-		    ~(ME_IO_IRQ_START_EXTENDED_STATUS |
-		      ME_IO_IRQ_START_DIO_BYTE)) {
-			PERROR("Invalid flag specified.\n");
-			return ME_ERRNO_INVALID_FLAGS;
-		}
-
-		if ((irq_edge != ME_IRQ_EDGE_RISING)
-		    && (irq_edge != ME_IRQ_EDGE_FALLING)
-		    && (irq_edge != ME_IRQ_EDGE_ANY)) {
-			PERROR("Invalid irq edge specified.\n");
-			return ME_ERRNO_INVALID_IRQ_EDGE;
-		}
-
-		if (!(irq_arg & 0xFF)) {
-			PERROR("No mask specified.\n");
-			return ME_ERRNO_INVALID_IRQ_ARG;
-		}
-	} else {
-		PERROR("Invalid irq source specified.\n");
-		return ME_ERRNO_INVALID_IRQ_SOURCE;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, status);
-	if (irq_source == ME_IRQ_SOURCE_DIO_PATTERN) {
-		outb(irq_arg, instance->compare_reg);
-		PDEBUG_REG("compare_reg outb(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->compare_reg - instance->reg_base, irq_arg);
-		outb(0xFF, instance->mask_reg);
-		PDEBUG_REG("mask_reg outb(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->mask_reg - instance->reg_base, 0xff);
-		instance->compare_value = irq_arg;
-		instance->filtering_flag =
-		    (flags & ME_IO_IRQ_START_PATTERN_FILTERING) ? 1 : 0;
-	}
-	if (irq_source == ME_IRQ_SOURCE_DIO_MASK) {
-		outb(irq_arg, instance->mask_reg);
-		PDEBUG_REG("mask_reg outb(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->mask_reg - instance->reg_base, irq_arg);
-		instance->filtering_flag = 0;
-	}
-
-	spin_lock(instance->irq_mode_lock);
-	tmp = inb(instance->irq_mode_reg);
-	tmp &=
-	    ~(ME8200_IRQ_MODE_MASK <<
-	      (ME8200_IRQ_MODE_DI_SHIFT * instance->di_idx));
-	if (irq_source == ME_IRQ_SOURCE_DIO_PATTERN) {
-		tmp |=
-		    ME8200_IRQ_MODE_MASK_COMPARE << (ME8200_IRQ_MODE_DI_SHIFT *
-						     instance->di_idx);
-	}
-
-	if (irq_source == ME_IRQ_SOURCE_DIO_MASK) {
-		tmp |=
-		    ME8200_IRQ_MODE_MASK_MASK << (ME8200_IRQ_MODE_DI_SHIFT *
-						  instance->di_idx);
-	}
-	outb(tmp, instance->irq_mode_reg);
-	PDEBUG_REG("irq_mode_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_mode_reg - instance->reg_base, tmp);
-	spin_unlock(instance->irq_mode_lock);
-
-	spin_lock(instance->irq_ctrl_lock);
-	tmp = inb(instance->irq_ctrl_reg);
-	tmp |=
-	    (ME8200_DI_IRQ_CTRL_BIT_CLEAR <<
-	     (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx));
-	tmp |=
-	    ME8200_DI_IRQ_CTRL_BIT_ENABLE << (ME8200_DI_IRQ_CTRL_SHIFT *
-					      instance->di_idx);
-
-	if (irq_source == ME_IRQ_SOURCE_DIO_MASK) {
-		tmp &=
-		    ~(ME8200_DI_IRQ_CTRL_MASK_EDGE <<
-		      (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx));
-		if (irq_edge == ME_IRQ_EDGE_RISING) {
-			tmp |=
-			    ME8200_DI_IRQ_CTRL_MASK_EDGE_RISING <<
-			    (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx);
-		} else if (irq_edge == ME_IRQ_EDGE_FALLING) {
-			tmp |=
-			    ME8200_DI_IRQ_CTRL_MASK_EDGE_FALLING <<
-			    (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx);
-		} else if (irq_edge == ME_IRQ_EDGE_ANY) {
-			tmp |=
-			    ME8200_DI_IRQ_CTRL_MASK_EDGE_ANY <<
-			    (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx);
-		}
-	}
-	outb(tmp, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, tmp);
-	tmp &=
-	    ~(ME8200_DI_IRQ_CTRL_BIT_CLEAR <<
-	      (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx));
-	outb(tmp, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, tmp);
-
-	instance->line_value = inb(instance->port_reg);
-	spin_unlock(instance->irq_ctrl_lock);
-
-	instance->rised = 0;
-	instance->status_value = 0;
-	instance->status_value_edges = 0;
-	instance->status_flag = flags & ME_IO_IRQ_START_EXTENDED_STATUS;
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_di_io_irq_wait(me_subdevice_t *subdevice,
-				 struct file *filep,
-				 int channel,
-				 int *irq_count,
-				 int *value, int time_out, int flags)
-{
-	me8200_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	long t = 0;
-	unsigned long cpu_flags;
-	int count;
-
-	PDEBUG("executed.\n");
-	PDEVELOP("PID: %d.\n", current->pid);
-
-	instance = (me8200_di_subdevice_t *) subdevice;
-
-	if (flags &
-	    ~(ME_IO_IRQ_WAIT_NORMAL_STATUS | ME_IO_IRQ_WAIT_EXTENDED_STATUS)) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		t = (time_out * HZ) / 1000;
-
-		if (t == 0)
-			t = 1;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (instance->rised <= 0) {
-		instance->rised = 0;
-		count = instance->count;
-
-		if (time_out) {
-			t = wait_event_interruptible_timeout(instance->
-							     wait_queue,
-							     ((count !=
-							       instance->count)
-							      || (instance->
-								  rised < 0)),
-							     t);
-//                      t = wait_event_interruptible_timeout(instance->wait_queue, (instance->rised != 0), t);
-			if (t == 0) {
-				PERROR("Wait on interrupt timed out.\n");
-				err = ME_ERRNO_TIMEOUT;
-			}
-		} else {
-			wait_event_interruptible(instance->wait_queue,
-						 ((count != instance->count)
-						  || (instance->rised < 0)));
-//                      wait_event_interruptible(instance->wait_queue, (instance->rised != 0));
-		}
-
-		if (instance->rised < 0) {
-			PERROR("Wait on interrupt aborted by user.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-	}
-
-	if (signal_pending(current)) {
-		PERROR("Wait on interrupt aborted by signal.\n");
-		err = ME_ERRNO_SIGNAL;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	*irq_count = instance->count;
-	if (!err) {
-		if (flags & ME_IO_IRQ_WAIT_NORMAL_STATUS) {
-			*value = instance->status_value;
-		} else if (flags & ME_IO_IRQ_WAIT_EXTENDED_STATUS) {
-			*value = instance->status_value_edges;
-		} else {	// Use default
-			if (!instance->status_flag) {
-				*value = instance->status_value;
-			} else {
-				*value = instance->status_value_edges;
-			}
-		}
-		instance->rised = 0;
-/*
-			instance->status_value = 0;
-			instance->status_value_edges = 0;
-*/
-	} else {
-		*value = 0;
-	}
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_di_io_irq_stop(me_subdevice_t *subdevice,
-				 struct file *filep, int channel, int flags)
-{
-	me8200_di_subdevice_t *instance;
-	uint8_t tmp;
-	unsigned long status;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_di_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER spin_lock_irqsave(&instance->subdevice_lock, status);
-	spin_lock(instance->irq_ctrl_lock);
-	tmp = inb(instance->irq_ctrl_reg);
-	tmp |=
-	    (ME8200_DI_IRQ_CTRL_BIT_ENABLE <<
-	     (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx));
-	outb(tmp, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, tmp);
-	tmp &=
-	    ~(ME8200_DI_IRQ_CTRL_BIT_ENABLE <<
-	      (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx));
-	tmp |=
-	    (ME8200_DI_IRQ_CTRL_BIT_CLEAR <<
-	     (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx));
-//                      tmp &= ~(ME8200_DI_IRQ_CTRL_BIT_CLEAR << (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx));
-	outb(tmp, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->irq_ctrl_lock);
-
-	instance->rised = -1;
-	instance->status_value = 0;
-	instance->status_value_edges = 0;
-	instance->filtering_flag = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_di_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me8200_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long status;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_di_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, status);
-
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-			} else {
-				PERROR("Invalid port direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_di_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me8200_di_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long status;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_di_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, status);
-
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = inb(instance->port_reg) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = inb(instance->port_reg);
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_di_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags)
-{
-	me8200_di_subdevice_t *instance = (me8200_di_subdevice_t *) subdevice;
-
-	PDEBUG("executed.\n");
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	instance->count = 0;
-	return me8200_di_io_irq_stop(subdevice, filep, 0, 0);
-}
-
-static int me8200_di_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_di_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DI;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_di_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps =
-	    ME_CAPS_DIO_BIT_PATTERN_IRQ |
-	    ME_CAPS_DIO_BIT_MASK_IRQ_EDGE_RISING |
-	    ME_CAPS_DIO_BIT_MASK_IRQ_EDGE_FALLING |
-	    ME_CAPS_DIO_BIT_MASK_IRQ_EDGE_ANY;
-	return ME_ERRNO_SUCCESS;
-}
-
-static irqreturn_t me8200_isr(int irq, void *dev_id)
-{
-	me8200_di_subdevice_t *instance;
-	uint8_t ctrl;
-	uint8_t irq_status;
-	uint8_t line_value = 0;
-	uint8_t line_status = 0;
-	uint32_t status_val = 0;
-
-	instance = (me8200_di_subdevice_t *) dev_id;
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	irq_status = inb(instance->irq_status_reg);
-	if (!irq_status) {
-		PINFO
-		    ("%ld Shared interrupt. %s(): idx=%d irq_status_reg=0x%04X\n",
-		     jiffies, __func__, instance->di_idx, irq_status);
-		return IRQ_NONE;
-	}
-
-	PDEBUG("executed.\n");
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->irq_ctrl_lock);
-	ctrl = inb(instance->irq_ctrl_reg);
-	ctrl |=
-	    ME8200_DI_IRQ_CTRL_BIT_CLEAR << (ME8200_DI_IRQ_CTRL_SHIFT *
-					     instance->di_idx);
-	outb(ctrl, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, ctrl);
-	ctrl &=
-	    ~(ME8200_DI_IRQ_CTRL_BIT_CLEAR <<
-	      (ME8200_DI_IRQ_CTRL_SHIFT * instance->di_idx));
-	outb(ctrl, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, ctrl);
-
-	line_value = inb(instance->port_reg);
-	spin_unlock(instance->irq_ctrl_lock);
-
-	line_status = ((uint8_t) instance->line_value ^ line_value);
-
-	// Make extended information.
-	status_val |= (0x00FF & (~(uint8_t) instance->line_value & line_value)) << 16;	//Raise
-	status_val |= (0x00FF & ((uint8_t) instance->line_value & ~line_value));	//Fall
-
-	instance->line_value = (int)line_value;
-
-	if (instance->rised == 0) {
-		instance->status_value = irq_status | line_status;
-		instance->status_value_edges = status_val;
-	} else {
-		instance->status_value |= irq_status | line_status;
-		instance->status_value_edges |= status_val;
-	}
-
-	if (instance->filtering_flag) {	// For compare mode only.
-		if (instance->compare_value == instance->line_value) {
-			instance->rised = 1;
-			instance->count++;
-		}
-	} else {
-		instance->rised = 1;
-		instance->count++;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	spin_unlock(&instance->subdevice_lock);
-
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t me8200_isr_EX(int irq, void *dev_id)
-{
-	me8200_di_subdevice_t *instance;
-	uint8_t irq_status = 0;
-	uint16_t irq_status_EX = 0;
-	uint32_t status_val = 0;
-	int i, j;
-
-	instance = (me8200_di_subdevice_t *) dev_id;
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	PDEBUG("executed.\n");
-
-	//Reset latches. Copy status to extended registers.
-	irq_status = inb(instance->irq_status_reg);
-	PDEBUG_REG("idx=%d irq_status_reg=0x%02X\n", instance->di_idx,
-		   irq_status);
-
-	if (!irq_status) {
-		PINFO
-		    ("%ld Shared interrupt. %s(): idx=%d irq_status_reg=0x%04X\n",
-		     jiffies, __func__, instance->di_idx, irq_status);
-		return IRQ_NONE;
-	}
-
-	irq_status_EX = inb(instance->irq_status_low_reg);
-	irq_status_EX |= (inb(instance->irq_status_high_reg) << 8);
-
-	PDEVELOP("EXTENDED REG: 0x%04x\n", irq_status_EX);
-	instance->line_value = inb(instance->port_reg);
-
-	// Format extended information.
-	for (i = 0, j = 0; i < 8; i++, j += 2) {
-		status_val |= ((0x01 << j) & irq_status_EX) >> (j - i);	//Fall
-		status_val |= ((0x01 << (j + 1)) & irq_status_EX) << (15 - j + i);	//Raise
-	}
-
-	spin_lock(&instance->subdevice_lock);
-	if (instance->rised == 0) {
-		instance->status_value = irq_status;
-		instance->status_value_edges = status_val;
-	} else {
-		instance->status_value |= irq_status;
-		instance->status_value_edges |= status_val;
-	}
-
-	if (instance->filtering_flag) {	// For compare mode only.
-		if (instance->compare_value == instance->line_value) {
-			instance->rised = 1;
-			instance->count++;
-		}
-	} else {
-		instance->rised = 1;
-		instance->count++;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return IRQ_HANDLED;
-}
-
-static void me8200_di_destructor(struct me_subdevice *subdevice)
-{
-	me8200_di_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_di_subdevice_t *) subdevice;
-
-	free_irq(instance->irq, (void *)instance);
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-me8200_di_subdevice_t *me8200_di_constructor(uint32_t me8200_regbase,
-					     unsigned int di_idx,
-					     int irq,
-					     spinlock_t *irq_ctrl_lock,
-					     spinlock_t *irq_mode_lock)
-{
-	me8200_di_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me8200_di_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me8200_di_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Check firmware version.
-	me8200_di_check_version(subdevice,
-				me8200_regbase + ME8200_FIRMWARE_VERSION_REG);
-
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->irq_ctrl_lock = irq_ctrl_lock;
-	subdevice->irq_mode_lock = irq_mode_lock;
-
-	/* Save the subdevice index. */
-	subdevice->di_idx = di_idx;
-
-	/* Initialize registers */
-	if (di_idx == 0) {
-		subdevice->port_reg = me8200_regbase + ME8200_DI_PORT_0_REG;
-		subdevice->mask_reg = me8200_regbase + ME8200_DI_MASK_0_REG;
-		subdevice->compare_reg =
-		    me8200_regbase + ME8200_DI_COMPARE_0_REG;
-		subdevice->irq_status_reg =
-		    me8200_regbase + ME8200_DI_CHANGE_0_REG;
-
-		subdevice->irq_status_low_reg =
-		    me8200_regbase + ME8200_DI_EXTEND_CHANGE_0_LOW_REG;
-		subdevice->irq_status_high_reg =
-		    me8200_regbase + ME8200_DI_EXTEND_CHANGE_0_HIGH_REG;
-	} else if (di_idx == 1) {
-		subdevice->port_reg = me8200_regbase + ME8200_DI_PORT_1_REG;
-		subdevice->mask_reg = me8200_regbase + ME8200_DI_MASK_1_REG;
-		subdevice->compare_reg =
-		    me8200_regbase + ME8200_DI_COMPARE_1_REG;
-		subdevice->irq_status_reg =
-		    me8200_regbase + ME8200_DI_CHANGE_1_REG;
-
-		subdevice->irq_status_low_reg =
-		    me8200_regbase + ME8200_DI_EXTEND_CHANGE_1_LOW_REG;
-		subdevice->irq_status_high_reg =
-		    me8200_regbase + ME8200_DI_EXTEND_CHANGE_1_HIGH_REG;
-	} else {
-		PERROR("Wrong subdevice idx=%d.\n", di_idx);
-		kfree(subdevice);
-		return NULL;
-	}
-	subdevice->irq_ctrl_reg = me8200_regbase + ME8200_DI_IRQ_CTRL_REG;
-	subdevice->irq_mode_reg = me8200_regbase + ME8200_IRQ_MODE_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = me8200_regbase;
-#endif
-
-	/* Initialize wait queue */
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_irq_start = me8200_di_io_irq_start;
-	subdevice->base.me_subdevice_io_irq_wait = me8200_di_io_irq_wait;
-	subdevice->base.me_subdevice_io_irq_stop = me8200_di_io_irq_stop;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me8200_di_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me8200_di_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me8200_di_io_single_read;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me8200_di_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me8200_di_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me8200_di_query_subdevice_caps;
-	subdevice->base.me_subdevice_destructor = me8200_di_destructor;
-
-	subdevice->rised = 0;
-	subdevice->count = 0;
-
-	/* Register interrupt service routine. */
-	subdevice->irq = irq;
-	if (subdevice->version > 0) {	// NEW
-		err = request_irq(subdevice->irq, me8200_isr_EX,
-				  IRQF_DISABLED | IRQF_SHARED,
-				  ME8200_NAME, (void *)subdevice);
-	} else {		//OLD
-		err = request_irq(subdevice->irq, me8200_isr,
-				  IRQF_DISABLED | IRQF_SHARED,
-				  ME8200_NAME, (void *)subdevice);
-	}
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	PDEBUG("Registred irq=%d.\n", subdevice->irq);
-
-	return subdevice;
-}
-
-static void me8200_di_check_version(me8200_di_subdevice_t *instance,
-				    unsigned long addr)
-{
-
-	PDEBUG("executed.\n");
-	instance->version = 0x000000FF & inb(addr);
-	PDEVELOP("me8200 firmware version: %d\n", instance->version);
-
-	/// @note Fix for wrong values in this registry.
-	if ((instance->version < 0x7) || (instance->version > 0x1F))
-		instance->version = 0x0;
-}
diff --git a/drivers/staging/meilhaus/me8200_di.h b/drivers/staging/meilhaus/me8200_di.h
deleted file mode 100644
index 2a3b005..0000000
--- a/drivers/staging/meilhaus/me8200_di.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/**
- * @file me8200_di.h
- *
- * @brief ME-8200 digital input subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8200_DI_H_
-#define _ME8200_DI_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me8200_di_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;
-	spinlock_t *irq_ctrl_lock;
-	spinlock_t *irq_mode_lock;
-
-	unsigned int di_idx;
-	unsigned int version;
-
-	int irq;						/**< The number of the interrupt request. */
-	volatile int rised;				/**< Flag to indicate if an interrupt occured. */
-	uint status_flag;				/**< Default interupt status flag */
-	uint status_value;				/**< Interupt status */
-	uint status_value_edges;			/**< Extended interupt status */
-	uint line_value;
-	int count;						/**< Counts the number of interrupts occured. */
-	uint8_t compare_value;
-	uint8_t filtering_flag;
-
-	wait_queue_head_t wait_queue;	/**< To wait on interrupts. */
-
-	unsigned long port_reg;			/**< The digital input port. */
-	unsigned long compare_reg;		/**< The register to hold the value to compare with. */
-	unsigned long mask_reg;			/**< The register to hold the mask. */
-	unsigned long irq_mode_reg;		/**< The interrupt mode register. */
-	unsigned long irq_ctrl_reg;		/**< The interrupt control register. */
-	unsigned long irq_status_reg;	/**< The interrupt status register. Also interrupt reseting register (firmware version 7 and later).*/
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-	unsigned long firmware_version_reg;	/**< The interrupt reseting register. */
-
-	unsigned long irq_status_low_reg;	/**< The interrupt extended status register (low part). */
-	unsigned long irq_status_high_reg;	/**< The interrupt extended status register (high part). */
-} me8200_di_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-8200 digital input subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me8200_di_subdevice_t *me8200_di_constructor(uint32_t me8200_reg_base,
-					     unsigned int di_idx,
-					     int irq,
-					     spinlock_t * irq_ctrl_lock,
-					     spinlock_t * irq_mode_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8200_di_reg.h b/drivers/staging/meilhaus/me8200_di_reg.h
deleted file mode 100644
index b9a619d..0000000
--- a/drivers/staging/meilhaus/me8200_di_reg.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/**
- * @file me8200_di_reg.h
- *
- * @brief ME-8200 digital input subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8200_DI_REG_H_
-#define _ME8200_DI_REG_H_
-
-#ifdef __KERNEL__
-
-// Common registry for whole family.
-#define ME8200_DI_PORT_0_REG					0x3	// R
-#define ME8200_DI_PORT_1_REG					0x4	// R
-
-#define ME8200_DI_MASK_0_REG					0x5	// R/W
-#define ME8200_DI_MASK_1_REG					0x6	// R/W
-
-#define ME8200_DI_COMPARE_0_REG					0xA	// R/W
-#define ME8200_DI_COMPARE_1_REG					0xB	// R/W
-
-#define ME8200_DI_IRQ_CTRL_REG					0xC	// R/W
-
-#ifndef ME8200_IRQ_MODE_REG
-# define ME8200_IRQ_MODE_REG					0xD	// R/W
-#endif
-
-// This registry are for all versions
-#define ME8200_DI_CHANGE_0_REG					0xE	// R
-#define ME8200_DI_CHANGE_1_REG					0xF	// R
-
-#define ME8200_DI_IRQ_CTRL_BIT_CLEAR			0x4
-#define ME8200_DI_IRQ_CTRL_BIT_ENABLE			0x8
-
-// This registry are for firmware versions 7 and later
-#define ME8200_DI_EXTEND_CHANGE_0_LOW_REG		0x10	// R
-#define ME8200_DI_EXTEND_CHANGE_0_HIGH_REG		0x11	// R
-#define ME8200_DI_EXTEND_CHANGE_1_LOW_REG		0x12	// R
-#define ME8200_DI_EXTEND_CHANGE_1_HIGH_REG		0x13	// R
-
-#ifndef ME8200_FIRMWARE_VERSION_REG
-# define ME8200_FIRMWARE_VERSION_REG			0x14	// R
-#endif
-
-// Bit definitions
-#define ME8200_DI_IRQ_CTRL_MASK_EDGE			0x3
-#define ME8200_DI_IRQ_CTRL_MASK_EDGE_RISING		0x0
-#define ME8200_DI_IRQ_CTRL_MASK_EDGE_FALLING	0x1
-#define ME8200_DI_IRQ_CTRL_MASK_EDGE_ANY		0x3
-
-// Others
-#define ME8200_DI_IRQ_CTRL_SHIFT				4
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8200_dio.c b/drivers/staging/meilhaus/me8200_dio.c
deleted file mode 100644
index c7f43f0..0000000
--- a/drivers/staging/meilhaus/me8200_dio.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/**
- * @file me8200_dio.c
- *
- * @brief ME-8200 digital input/output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me8200_dio_reg.h"
-#include "me8200_dio.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me8200_dio_io_reset_subdevice(struct me_subdevice *subdevice,
-					 struct file *filep, int flags)
-{
-	me8200_dio_subdevice_t *instance;
-	uint8_t mode;
-
-	PDEBUG("executed.\n");
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	instance = (me8200_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inb(instance->ctrl_reg);
-	mode &= ~(0x3 << (instance->dio_idx * 2));
-	outb(mode, instance->ctrl_reg);
-	PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->ctrl_reg - instance->reg_base, mode);
-	spin_unlock(instance->ctrl_reg_lock);
-	outb(0x00, instance->port_reg);
-	PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_reg - instance->reg_base, 0x00);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_dio_io_single_config(me_subdevice_t *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int single_config,
-				       int ref,
-				       int trig_chan,
-				       int trig_type, int trig_edge, int flags)
-{
-	me8200_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint32_t mode;
-	uint32_t size =
-	    flags & (ME_IO_SINGLE_CONFIG_DIO_BIT | ME_IO_SINGLE_CONFIG_DIO_BYTE
-		     | ME_IO_SINGLE_CONFIG_DIO_WORD |
-		     ME_IO_SINGLE_CONFIG_DIO_DWORD);
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	mode = inb(instance->ctrl_reg);
-	switch (size) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-				mode &=
-				    ~((ME8200_DIO_CTRL_BIT_MODE_0 |
-				       ME8200_DIO_CTRL_BIT_MODE_1) <<
-				      (instance->dio_idx * 2));
-			} else if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-				mode &=
-				    ~((ME8200_DIO_CTRL_BIT_MODE_0 |
-				       ME8200_DIO_CTRL_BIT_MODE_1) <<
-				      (instance->dio_idx * 2));
-				mode |=
-				    ME8200_DIO_CTRL_BIT_MODE_0 << (instance->
-								   dio_idx * 2);
-			} else {
-				PERROR
-				    ("Invalid port configuration specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid channel number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid flags.\n");
-
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (!err) {
-		outb(mode, instance->ctrl_reg);
-		PDEBUG_REG("ctrl_reg outl(0x%lX+0x%lX)=0x%x\n",
-			   instance->reg_base,
-			   instance->ctrl_reg - instance->reg_base, mode);
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_dio_io_single_read(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int *value, int time_out, int flags)
-{
-	me8200_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t mode;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME8200_DIO_CTRL_BIT_MODE_0 |
-					      ME8200_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-
-			if ((mode ==
-			     (ME8200_DIO_CTRL_BIT_MODE_0 <<
-			      (instance->dio_idx * 2))) || !mode) {
-				*value =
-				    inb(instance->
-					port_reg) & (0x0001 << channel);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME8200_DIO_CTRL_BIT_MODE_0 |
-					      ME8200_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-
-			if ((mode ==
-			     (ME8200_DIO_CTRL_BIT_MODE_0 <<
-			      (instance->dio_idx * 2))) || !mode) {
-				*value = inb(instance->port_reg) & 0x00FF;
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_dio_io_single_write(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int value, int time_out, int flags)
-{
-	me8200_dio_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t mode;
-	uint8_t byte;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_dio_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME8200_DIO_CTRL_BIT_MODE_0 |
-					      ME8200_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-
-			if (mode ==
-			    (ME8200_DIO_CTRL_BIT_MODE_0 <<
-			     (instance->dio_idx * 2))) {
-				byte = inb(instance->port_reg);
-
-				if (value)
-					byte |= 0x1 << channel;
-				else
-					byte &= ~(0x1 << channel);
-
-				outb(byte, instance->port_reg);
-				PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->port_reg -
-					   instance->reg_base, byte);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			mode =
-			    inb(instance->
-				ctrl_reg) & ((ME8200_DIO_CTRL_BIT_MODE_0 |
-					      ME8200_DIO_CTRL_BIT_MODE_1) <<
-					     (instance->dio_idx * 2));
-
-			if (mode ==
-			    (ME8200_DIO_CTRL_BIT_MODE_0 <<
-			     (instance->dio_idx * 2))) {
-				outb(value, instance->port_reg);
-				PDEBUG_REG("port_reg outl(0x%lX+0x%lX)=0x%x\n",
-					   instance->reg_base,
-					   instance->port_reg -
-					   instance->reg_base, value);
-			} else {
-				PERROR("Port not in output or input mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(instance->ctrl_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_dio_query_number_channels(me_subdevice_t *subdevice,
-					    int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_dio_query_subdevice_type(me_subdevice_t *subdevice,
-					   int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DIO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_dio_query_subdevice_caps(me_subdevice_t *subdevice,
-					   int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_DIO_DIR_BYTE;
-	return ME_ERRNO_SUCCESS;
-}
-
-me8200_dio_subdevice_t *me8200_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t *ctrl_reg_lock)
-{
-	me8200_dio_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me8200_dio_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me8200_dio_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save digital i/o index */
-	subdevice->dio_idx = dio_idx;
-
-	/* Save the subdevice index */
-	subdevice->ctrl_reg = reg_base + ME8200_DIO_CTRL_REG;
-	subdevice->port_reg = reg_base + ME8200_DIO_PORT_REG + dio_idx;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me8200_dio_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me8200_dio_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me8200_dio_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me8200_dio_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me8200_dio_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me8200_dio_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me8200_dio_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me8200_dio.h b/drivers/staging/meilhaus/me8200_dio.h
deleted file mode 100644
index 9ddd93d..0000000
--- a/drivers/staging/meilhaus/me8200_dio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/**
- * @file me8200_dio.h
- *
- * @brief ME-8200 digital input/output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8200_DIO_H_
-#define _ME8200_DIO_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me8200_dio_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg from concurrent access. */
-	unsigned int dio_idx;			/**< The index of the digital i/o on the device. */
-
-	unsigned long port_reg;			/**< Register holding the port status. */
-	unsigned long ctrl_reg;			/**< Register to configure the port direction. */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me8200_dio_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-8200 digital input/ouput subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param dio_idx The index of the digital i/o port on the device.
- * @param ctrl_reg_lock Spin lock protecting the control register.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me8200_dio_subdevice_t *me8200_dio_constructor(uint32_t reg_base,
-					       unsigned int dio_idx,
-					       spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8200_dio_reg.h b/drivers/staging/meilhaus/me8200_dio_reg.h
deleted file mode 100644
index ac94a13..0000000
--- a/drivers/staging/meilhaus/me8200_dio_reg.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/**
- * @file me8200_dio_reg.h
- *
- * @brief ME-8200 digital input/output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8200_DIO_REG_H_
-#define _ME8200_DIO_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME8200_DIO_CTRL_REG					0x7	// R/W
-#define ME8200_DIO_PORT_0_REG				0x8	// R/W
-#define ME8200_DIO_PORT_1_REG				0x9	// R/W
-#define ME8200_DIO_PORT_REG					ME8200_DIO_PORT_0_REG	// R/W
-
-#define ME8200_DIO_CTRL_BIT_MODE_0			0x01
-#define ME8200_DIO_CTRL_BIT_MODE_1			0x02
-#define ME8200_DIO_CTRL_BIT_MODE_2			0x04
-#define ME8200_DIO_CTRL_BIT_MODE_3			0x08
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8200_do.c b/drivers/staging/meilhaus/me8200_do.c
deleted file mode 100644
index e42a137..0000000
--- a/drivers/staging/meilhaus/me8200_do.c
+++ /dev/null
@@ -1,591 +0,0 @@
-/**
- * @file me8200_do.c
- *
- * @brief ME-8200 digital output subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "meids.h"
-#include "medebug.h"
-#include "me8200_reg.h"
-#include "me8200_do_reg.h"
-#include "me8200_do.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static int me8200_do_io_irq_start(me_subdevice_t *subdevice,
-				  struct file *filep,
-				  int channel,
-				  int irq_source,
-				  int irq_edge, int irq_arg, int flags)
-{
-	me8200_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t tmp;
-	unsigned long status;
-
-	if (flags & ~ME_IO_IRQ_START_DIO_BYTE) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel != 0) {
-		PERROR("Invalid channel specified.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	if (irq_source != ME_IRQ_SOURCE_DIO_OVER_TEMP) {
-		PERROR("Invalid interrupt source specified.\n");
-		return ME_ERRNO_INVALID_IRQ_SOURCE;
-	}
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, status);
-	spin_lock(instance->irq_mode_lock);
-	tmp = inb(instance->irq_ctrl_reg);
-	tmp |=
-	    ME8200_IRQ_MODE_BIT_ENABLE_POWER << (ME8200_IRQ_MODE_POWER_SHIFT *
-						 instance->do_idx);
-	outb(tmp, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->irq_mode_lock);
-	instance->rised = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_do_io_irq_wait(me_subdevice_t *subdevice,
-				 struct file *filep,
-				 int channel,
-				 int *irq_count,
-				 int *value, int time_out, int flags)
-{
-	me8200_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	long t = 0;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_do_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (time_out < 0) {
-		PERROR("Invalid time_out specified.\n");
-		return ME_ERRNO_INVALID_TIMEOUT;
-	}
-
-	if (time_out) {
-		t = (time_out * HZ) / 1000;
-
-		if (t == 0)
-			t = 1;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	if (instance->rised <= 0) {
-		instance->rised = 0;
-
-		if (time_out) {
-			t = wait_event_interruptible_timeout(instance->
-							     wait_queue,
-							     (instance->rised !=
-							      0), t);
-
-			if (t == 0) {
-				PERROR
-				    ("Wait on external interrupt timed out.\n");
-				err = ME_ERRNO_TIMEOUT;
-			}
-		} else {
-			wait_event_interruptible(instance->wait_queue,
-						 (instance->rised != 0));
-		}
-
-		if (instance->rised < 0) {
-			PERROR("Wait on interrupt aborted by user.\n");
-			err = ME_ERRNO_CANCELLED;
-		}
-	}
-
-	if (signal_pending(current)) {
-		PERROR("Wait on external interrupt aborted by signal.\n");
-		err = ME_ERRNO_SIGNAL;
-	}
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	instance->rised = 0;
-	*irq_count = instance->count;
-	*value = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_do_io_irq_stop(me_subdevice_t *subdevice,
-				 struct file *filep, int channel, int flags)
-{
-	me8200_do_subdevice_t *instance;
-	uint8_t tmp;
-	unsigned long cpu_flags;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_do_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	spin_lock(instance->irq_mode_lock);
-	tmp = inb(instance->irq_ctrl_reg);
-	tmp &=
-	    ~(ME8200_IRQ_MODE_BIT_ENABLE_POWER <<
-	      (ME8200_IRQ_MODE_POWER_SHIFT * instance->do_idx));
-	outb(tmp, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->irq_mode_lock);
-	instance->rised = -1;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_do_io_reset_subdevice(struct me_subdevice *subdevice,
-					struct file *filep, int flags)
-{
-	me8200_do_subdevice_t *instance;
-	unsigned long cpu_flags;
-	uint8_t tmp;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_do_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, cpu_flags);
-	outb(0x00, instance->port_reg);
-	PDEBUG_REG("port_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->port_reg - instance->reg_base, 0x00);
-	spin_lock(instance->irq_mode_lock);
-	tmp = inb(instance->irq_ctrl_reg);
-	tmp &=
-	    ~(ME8200_IRQ_MODE_BIT_ENABLE_POWER <<
-	      (ME8200_IRQ_MODE_POWER_SHIFT * instance->do_idx));
-	outb(tmp, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outb(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, tmp);
-	spin_unlock(instance->irq_mode_lock);
-	instance->rised = -1;
-	instance->count = 0;
-	spin_unlock_irqrestore(&instance->subdevice_lock, cpu_flags);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_do_io_single_config(me_subdevice_t *subdevice,
-				      struct file *filep,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	me8200_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long status;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, status);
-	switch (flags) {
-	case ME_IO_SINGLE_CONFIG_NO_FLAGS:
-	case ME_IO_SINGLE_CONFIG_DIO_BYTE:
-		if (channel == 0) {
-			if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-			} else {
-				PERROR("Invalid byte direction specified.\n");
-				err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_do_io_single_read(me_subdevice_t *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	me8200_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	unsigned long status;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, status);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = inb(instance->port_reg) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = inb(instance->port_reg);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_do_io_single_write(me_subdevice_t *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	me8200_do_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-	uint8_t state;
-	unsigned long status;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_do_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock_irqsave(&instance->subdevice_lock, status);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			state = inb(instance->port_reg);
-			state =
-			    value ? (state | (0x1 << channel)) : (state &
-								  ~(0x1 <<
-								    channel));
-			outb(state, instance->port_reg);
-			PDEBUG_REG("port_reg outb(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->port_reg - instance->reg_base,
-				   state);
-		} else {
-			PERROR("Invalid bit number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			outb(value, instance->port_reg);
-			PDEBUG_REG("port_reg outb(0x%lX+0x%lX)=0x%x\n",
-				   instance->reg_base,
-				   instance->port_reg - instance->reg_base,
-				   value);
-		} else {
-			PERROR("Invalid byte number specified.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock_irqrestore(&instance->subdevice_lock, status);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8200_do_query_number_channels(me_subdevice_t *subdevice,
-					   int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 8;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_do_query_subdevice_type(me_subdevice_t *subdevice,
-					  int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8200_do_query_subdevice_caps(me_subdevice_t *subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_DIO_OVER_TEMP_IRQ;
-	return ME_ERRNO_SUCCESS;
-}
-
-static void me8200_do_destructor(struct me_subdevice *subdevice)
-{
-	me8200_do_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8200_do_subdevice_t *) subdevice;
-
-	free_irq(instance->irq, (void *)instance);
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-static irqreturn_t me8200_do_isr(int irq, void *dev_id)
-{
-	me8200_do_subdevice_t *instance;
-	uint16_t ctrl;
-	uint8_t irq_status;
-
-	instance = (me8200_do_subdevice_t *) dev_id;
-
-	if (irq != instance->irq) {
-		PERROR("Incorrect interrupt num: %d.\n", irq);
-		return IRQ_NONE;
-	}
-
-	irq_status = inb(instance->irq_status_reg);
-	if (!
-	    (irq_status &
-	     (ME8200_DO_IRQ_STATUS_BIT_ACTIVE << instance->do_idx))) {
-		PINFO
-		    ("%ld Shared interrupt. %s(): idx=%d irq_status_reg=0x%04X\n",
-		     jiffies, __func__, instance->do_idx, irq_status);
-		return IRQ_NONE;
-	}
-
-	PDEBUG("executed.\n");
-
-	spin_lock(&instance->subdevice_lock);
-	instance->rised = 1;
-	instance->count++;
-
-	spin_lock(instance->irq_mode_lock);
-	ctrl = inw(instance->irq_ctrl_reg);
-	ctrl |= ME8200_IRQ_MODE_BIT_CLEAR_POWER << instance->do_idx;
-	outw(ctrl, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, ctrl);
-	ctrl &= ~(ME8200_IRQ_MODE_BIT_CLEAR_POWER << instance->do_idx);
-	outw(ctrl, instance->irq_ctrl_reg);
-	PDEBUG_REG("irq_ctrl_reg outw(0x%lX+0x%lX)=0x%x\n", instance->reg_base,
-		   instance->irq_ctrl_reg - instance->reg_base, ctrl);
-	spin_unlock(instance->irq_mode_lock);
-	spin_unlock(&instance->subdevice_lock);
-	wake_up_interruptible_all(&instance->wait_queue);
-
-	return IRQ_HANDLED;
-}
-
-me8200_do_subdevice_t *me8200_do_constructor(uint32_t reg_base,
-					     unsigned int do_idx,
-					     int irq,
-					     spinlock_t *irq_mode_lock)
-{
-	me8200_do_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me8200_do_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me8200_do_subdevice_t));
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->irq_mode_lock = irq_mode_lock;
-
-	/* Save the index of the digital output */
-	subdevice->do_idx = do_idx;
-	subdevice->irq = irq;
-
-	/* Initialize the registers */
-	if (do_idx == 0) {
-		subdevice->port_reg = reg_base + ME8200_DO_PORT_0_REG;
-	} else if (do_idx == 1) {
-		subdevice->port_reg = reg_base + ME8200_DO_PORT_1_REG;
-	} else {
-		PERROR("Wrong subdevice idx=%d.\n", do_idx);
-		kfree(subdevice);
-		return NULL;
-	}
-	subdevice->irq_ctrl_reg = reg_base + ME8200_IRQ_MODE_REG;
-	subdevice->irq_status_reg = reg_base + ME8200_DO_IRQ_STATUS_REG;
-#ifdef MEDEBUG_DEBUG_REG
-	subdevice->reg_base = reg_base;
-#endif
-
-	/* Initialize the wait queue */
-	init_waitqueue_head(&subdevice->wait_queue);
-
-	/* Request the interrupt line */
-	err = request_irq(irq, me8200_do_isr,
-			  IRQF_DISABLED | IRQF_SHARED,
-			  ME8200_NAME, (void *)subdevice);
-
-	if (err) {
-		PERROR("Cannot get interrupt line.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	PINFO("Registered irq=%d.\n", irq);
-
-	/* Overload base class methods. */
-	subdevice->base.me_subdevice_io_irq_start = me8200_do_io_irq_start;
-	subdevice->base.me_subdevice_io_irq_wait = me8200_do_io_irq_wait;
-	subdevice->base.me_subdevice_io_irq_stop = me8200_do_io_irq_stop;
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me8200_do_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config =
-	    me8200_do_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me8200_do_io_single_read;
-	subdevice->base.me_subdevice_io_single_write =
-	    me8200_do_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me8200_do_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me8200_do_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me8200_do_query_subdevice_caps;
-	subdevice->base.me_subdevice_destructor = me8200_do_destructor;
-
-	subdevice->rised = 0;
-	subdevice->count = 0;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me8200_do.h b/drivers/staging/meilhaus/me8200_do.h
deleted file mode 100644
index 2758125..0000000
--- a/drivers/staging/meilhaus/me8200_do.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/**
- * @file me8200_do.h
- *
- * @brief ME-8200 digital output subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8200_DO_H_
-#define _ME8200_DO_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The template subdevice class.
- */
-typedef struct me8200_do_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *irq_mode_lock;
-
-	int irq;				/**< The number of the interrupt request */
-	int rised;				/**< Flag to indicate if an interrupt occured */
-	int count;				/**< Counts the number of interrupts occured */
-	wait_queue_head_t wait_queue;		/**< To wait on interrupts */
-
-	unsigned int do_idx;			/**< The number of the digital output */
-
-	unsigned long port_reg;			/**< The digital output port */
-	unsigned long irq_ctrl_reg;		/**< The interrupt control register */
-	unsigned long irq_status_reg;		/**< The interrupt status register */
-#ifdef MEDEBUG_DEBUG_REG
-	unsigned long reg_base;
-#endif
-} me8200_do_subdevice_t;
-
-/**
- * @brief The constructor to generate a ME-8200 digital output subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param do_idx The index of the digital output subdevice on this device.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me8200_do_subdevice_t *me8200_do_constructor(uint32_t reg_base,
-					     unsigned int do_idx,
-					     int irq,
-					     spinlock_t * irq_mode_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8200_do_reg.h b/drivers/staging/meilhaus/me8200_do_reg.h
deleted file mode 100644
index 4109504..0000000
--- a/drivers/staging/meilhaus/me8200_do_reg.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/**
- * @file me8200_ao_reg.h
- *
- * @brief ME-8200 analog output subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8200_DO_REG_H_
-#define _ME8200_DO_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME8200_DO_IRQ_STATUS_REG			0x0	// R
-#define ME8200_DO_PORT_0_REG				0x1	// R/W
-#define ME8200_DO_PORT_1_REG				0x2	// R/W
-
-#define ME8200_DO_IRQ_STATUS_BIT_ACTIVE		0x1
-#define ME8200_DO_IRQ_STATUS_SHIFT			1
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8200_reg.h b/drivers/staging/meilhaus/me8200_reg.h
deleted file mode 100644
index a73fe4d..0000000
--- a/drivers/staging/meilhaus/me8200_reg.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/**
- * @file me8200_reg.h
- *
- * @brief ME-8200 register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8200_REG_H_
-#define _ME8200_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME8200_IRQ_MODE_REG				0xD	// R/W
-
-#define ME8200_IRQ_MODE_MASK     			0x3
-
-#define ME8200_IRQ_MODE_MASK_MASK			0x0
-#define ME8200_IRQ_MODE_MASK_COMPARE			0x1
-
-#define ME8200_IRQ_MODE_BIT_ENABLE_POWER		0x10
-#define ME8200_IRQ_MODE_BIT_CLEAR_POWER			0x40
-
-#define ME8200_IRQ_MODE_DI_SHIFT			2
-#define ME8200_IRQ_MODE_POWER_SHIFT			1
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8254.c b/drivers/staging/meilhaus/me8254.c
deleted file mode 100644
index d8f742a..0000000
--- a/drivers/staging/meilhaus/me8254.c
+++ /dev/null
@@ -1,1176 +0,0 @@
-/**
- * @file me8254.c
- *
- * @brief 8254 subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "me8254_reg.h"
-#include "me8254.h"
-
-/*
- * Defines
- */
-#define ME8254_NUMBER_CHANNELS 1	/**< One channel per counter. */
-#define ME8254_CTR_WIDTH 16			/**< One counter has 16 bits. */
-
-/*
- * Functions
- */
-
-static int me8254_io_reset_subdevice(struct me_subdevice *subdevice,
-				     struct file *filep, int flags)
-{
-	me8254_subdevice_t *instance;
-	uint8_t clk_src;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8254_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	if (instance->ctr_idx == 0)
-		outb(ME8254_CTRL_SC0 | ME8254_CTRL_LM | ME8254_CTRL_M0 |
-		     ME8254_CTRL_BIN, instance->ctrl_reg);
-	else if (instance->ctr_idx == 1)
-		outb(ME8254_CTRL_SC1 | ME8254_CTRL_LM | ME8254_CTRL_M0 |
-		     ME8254_CTRL_BIN, instance->ctrl_reg);
-	else
-		outb(ME8254_CTRL_SC2 | ME8254_CTRL_LM | ME8254_CTRL_M0 |
-		     ME8254_CTRL_BIN, instance->ctrl_reg);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outb(0x00, instance->val_reg);
-	outb(0x00, instance->val_reg);
-
-	spin_lock(instance->clk_src_reg_lock);
-	clk_src = inb(instance->clk_src_reg);
-
-	switch (instance->device_id) {
-	case PCI_DEVICE_ID_MEILHAUS_ME1400:
-	case PCI_DEVICE_ID_MEILHAUS_ME140A:
-	case PCI_DEVICE_ID_MEILHAUS_ME140B:
-	case PCI_DEVICE_ID_MEILHAUS_ME14E0:
-	case PCI_DEVICE_ID_MEILHAUS_ME14EA:
-	case PCI_DEVICE_ID_MEILHAUS_ME14EB:
-		if (instance->me8254_idx == 0) {
-			if (instance->ctr_idx == 0)
-				clk_src &=
-				    ~(ME1400AB_8254_A_0_CLK_SRC_10MHZ |
-				      ME1400AB_8254_A_0_CLK_SRC_QUARZ);
-			else if (instance->ctr_idx == 1)
-				clk_src &= ~(ME1400AB_8254_A_1_CLK_SRC_PREV);
-			else
-				clk_src &= ~(ME1400AB_8254_A_2_CLK_SRC_PREV);
-		} else {
-			if (instance->ctr_idx == 0)
-				clk_src &=
-				    ~(ME1400AB_8254_B_0_CLK_SRC_10MHZ |
-				      ME1400AB_8254_B_0_CLK_SRC_QUARZ);
-			else if (instance->ctr_idx == 1)
-				clk_src &= ~(ME1400AB_8254_B_1_CLK_SRC_PREV);
-			else
-				clk_src &= ~(ME1400AB_8254_B_2_CLK_SRC_PREV);
-		}
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		switch (instance->me8254_idx) {
-		case 0:
-		case 2:
-		case 4:
-		case 6:
-		case 8:
-			if (instance->ctr_idx == 0)
-				clk_src &= ~(ME1400CD_8254_ACE_0_CLK_SRC_MASK);
-			else if (instance->ctr_idx == 1)
-				clk_src &= ~(ME1400CD_8254_ACE_1_CLK_SRC_MASK);
-			else
-				clk_src &= ~(ME1400CD_8254_ACE_2_CLK_SRC_MASK);
-			break;
-
-		default:
-			if (instance->ctr_idx == 0)
-				clk_src &= ~(ME1400CD_8254_BD_0_CLK_SRC_MASK);
-			else if (instance->ctr_idx == 1)
-				clk_src &= ~(ME1400CD_8254_BD_1_CLK_SRC_MASK);
-			else
-				clk_src &= ~(ME1400CD_8254_BD_2_CLK_SRC_MASK);
-			break;
-		}
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4610:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660IS:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670IS:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680IS:
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_A:
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_B:
-
-		/* No clock source register available */
-		break;
-
-	default:
-		PERROR("Invalid device type.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	if (!err)
-		outb(clk_src, instance->clk_src_reg);
-
-	spin_unlock(instance->clk_src_reg_lock);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me1400_ab_ref_config(me8254_subdevice_t *instance, int ref)
-{
-	uint8_t clk_src;
-
-	spin_lock(instance->clk_src_reg_lock);
-	clk_src = inb(instance->clk_src_reg);
-
-	switch (ref) {
-	case ME_REF_CTR_EXTERNAL:
-		if (instance->me8254_idx == 0) {
-			if (instance->ctr_idx == 0)
-				clk_src &= ~(ME1400AB_8254_A_0_CLK_SRC_QUARZ);
-			else if (instance->ctr_idx == 1)
-				clk_src &= ~(ME1400AB_8254_A_1_CLK_SRC_PREV);
-			else
-				clk_src &= ~(ME1400AB_8254_A_2_CLK_SRC_PREV);
-		} else {
-			if (instance->ctr_idx == 0)
-				clk_src &= ~(ME1400AB_8254_B_0_CLK_SRC_QUARZ);
-			else if (instance->ctr_idx == 1)
-				clk_src &= ~(ME1400AB_8254_B_1_CLK_SRC_PREV);
-			else
-				clk_src &= ~(ME1400AB_8254_B_2_CLK_SRC_PREV);
-		}
-
-		break;
-
-	case ME_REF_CTR_PREVIOUS:
-		if (instance->me8254_idx == 0) {
-			if (instance->ctr_idx == 0) {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_SINGLE_CONFIG;
-			} else if (instance->ctr_idx == 1)
-				clk_src |= (ME1400AB_8254_A_1_CLK_SRC_PREV);
-			else
-				clk_src |= (ME1400AB_8254_A_2_CLK_SRC_PREV);
-		} else {
-			if (instance->ctr_idx == 0) {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_SINGLE_CONFIG;
-			} else if (instance->ctr_idx == 1)
-				clk_src |= (ME1400AB_8254_B_1_CLK_SRC_PREV);
-			else
-				clk_src |= (ME1400AB_8254_B_2_CLK_SRC_PREV);
-		}
-
-		break;
-
-	case ME_REF_CTR_INTERNAL_1MHZ:
-		if (instance->me8254_idx == 0) {
-			if (instance->ctr_idx == 0) {
-				clk_src |= (ME1400AB_8254_A_0_CLK_SRC_QUARZ);
-				clk_src &= ~(ME1400AB_8254_A_0_CLK_SRC_10MHZ);
-			} else {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			if (instance->ctr_idx == 0) {
-				clk_src |= (ME1400AB_8254_B_0_CLK_SRC_QUARZ);
-				clk_src &= ~(ME1400AB_8254_B_0_CLK_SRC_10MHZ);
-			} else {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		}
-
-		break;
-
-	case ME_REF_CTR_INTERNAL_10MHZ:
-		if (instance->me8254_idx == 0) {
-			if (instance->ctr_idx == 0) {
-				clk_src |= (ME1400AB_8254_A_0_CLK_SRC_QUARZ);
-				clk_src |= (ME1400AB_8254_A_0_CLK_SRC_10MHZ);
-			} else {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		} else {
-			if (instance->ctr_idx == 0) {
-				clk_src |= (ME1400AB_8254_A_0_CLK_SRC_QUARZ);
-				clk_src |= (ME1400AB_8254_A_0_CLK_SRC_10MHZ);
-			} else {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_SINGLE_CONFIG;
-			}
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid reference.\n");
-		spin_unlock(instance->clk_src_reg_lock);
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	outb(clk_src, instance->clk_src_reg);
-	spin_unlock(instance->clk_src_reg_lock);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me1400_cd_ref_config(me8254_subdevice_t *instance, int ref)
-{
-	uint8_t clk_src;
-
-	spin_lock(instance->clk_src_reg_lock);
-	clk_src = inb(instance->clk_src_reg);
-
-	switch (ref) {
-	case ME_REF_CTR_EXTERNAL:
-		switch (instance->me8254_idx) {
-		case 0:
-		case 2:
-		case 4:
-		case 6:
-		case 8:
-			if (instance->ctr_idx == 0)
-				clk_src &= ~(ME1400CD_8254_ACE_0_CLK_SRC_MASK);
-			else if (instance->ctr_idx == 1)
-				clk_src &= ~(ME1400CD_8254_ACE_1_CLK_SRC_MASK);
-			else
-				clk_src &= ~(ME1400CD_8254_ACE_2_CLK_SRC_MASK);
-			break;
-
-		default:
-			if (instance->ctr_idx == 0)
-				clk_src &= ~(ME1400CD_8254_BD_0_CLK_SRC_MASK);
-			else if (instance->ctr_idx == 1)
-				clk_src &= ~(ME1400CD_8254_BD_1_CLK_SRC_MASK);
-			else
-				clk_src &= ~(ME1400CD_8254_BD_2_CLK_SRC_MASK);
-			break;
-		}
-		break;
-
-	case ME_REF_CTR_PREVIOUS:
-		switch (instance->me8254_idx) {
-		case 0:
-		case 2:
-		case 4:
-		case 6:
-		case 8:
-			if (instance->ctr_idx == 0) {
-				clk_src &= ~(ME1400CD_8254_ACE_0_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_ACE_0_CLK_SRC_PREV);
-			} else if (instance->ctr_idx == 1) {
-				clk_src &= ~(ME1400CD_8254_ACE_1_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_ACE_1_CLK_SRC_PREV);
-			} else {
-				clk_src &= ~(ME1400CD_8254_ACE_2_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_ACE_2_CLK_SRC_PREV);
-			}
-			break;
-
-		default:
-			if (instance->ctr_idx == 0) {
-				clk_src &= ~(ME1400CD_8254_BD_0_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_BD_0_CLK_SRC_PREV);
-			} else if (instance->ctr_idx == 1) {
-				clk_src &= ~(ME1400CD_8254_BD_1_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_BD_1_CLK_SRC_PREV);
-			} else {
-				clk_src &= ~(ME1400CD_8254_BD_2_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_BD_2_CLK_SRC_PREV);
-			}
-			break;
-		}
-
-		break;
-
-	case ME_REF_CTR_INTERNAL_1MHZ:
-		switch (instance->me8254_idx) {
-		case 0:
-		case 2:
-		case 4:
-		case 6:
-		case 8:
-			if (instance->ctr_idx == 0) {
-				clk_src &= ~(ME1400CD_8254_ACE_0_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_ACE_0_CLK_SRC_1MHZ);
-			} else {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_REF;
-			}
-
-			break;
-
-		default:
-			if (instance->ctr_idx == 0) {
-				clk_src &= ~(ME1400CD_8254_BD_0_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_BD_0_CLK_SRC_1MHZ);
-			} else {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_REF;
-			}
-			break;
-		}
-
-		break;
-
-	case ME_REF_CTR_INTERNAL_10MHZ:
-		switch (instance->me8254_idx) {
-		case 0:
-		case 2:
-		case 4:
-		case 6:
-		case 8:
-			if (instance->ctr_idx == 0) {
-				clk_src &= ~(ME1400CD_8254_ACE_0_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_ACE_0_CLK_SRC_10MHZ);
-			} else {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_REF;
-			}
-			break;
-
-		default:
-			if (instance->ctr_idx == 0) {
-				clk_src &= ~(ME1400CD_8254_BD_0_CLK_SRC_MASK);
-				clk_src |= (ME1400CD_8254_BD_0_CLK_SRC_10MHZ);
-			} else {
-				PERROR("Invalid reference.\n");
-				spin_unlock(instance->clk_src_reg_lock);
-				return ME_ERRNO_INVALID_REF;
-			}
-
-			break;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid reference.\n");
-		spin_unlock(instance->clk_src_reg_lock);
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	outb(clk_src, instance->clk_src_reg);
-	spin_unlock(instance->clk_src_reg_lock);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me4600_ref_config(me8254_subdevice_t *instance, int ref)
-{
-	switch (ref) {
-
-	case ME_REF_CTR_EXTERNAL:
-		// Nothing to do
-		break;
-
-	default:
-		PERROR("Invalid reference.\n");
-//                      spin_unlock(instance->clk_src_reg_lock);
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8100_ref_config(me8254_subdevice_t *instance, int ref)
-{
-	switch (ref) {
-
-	case ME_REF_CTR_EXTERNAL:
-		// Nothing to do
-		break;
-
-	default:
-		PERROR("Invalid reference.\n");
-//                      spin_unlock(instance->clk_src_reg_lock);
-		return ME_ERRNO_INVALID_REF;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8254_io_single_config(struct me_subdevice *subdevice,
-				   struct file *filep,
-				   int channel,
-				   int single_config,
-				   int ref,
-				   int trig_chan,
-				   int trig_type, int trig_edge, int flags)
-{
-	me8254_subdevice_t *instance;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	if (channel) {
-		PERROR("Invalid channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	instance = (me8254_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	// Configure the counter modes
-	if (instance->ctr_idx == 0) {
-		if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_0) {
-			outb(ME8254_CTRL_SC0 | ME8254_CTRL_LM | ME8254_CTRL_M0 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_1) {
-			outb(ME8254_CTRL_SC0 | ME8254_CTRL_LM | ME8254_CTRL_M1 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_2) {
-			outb(ME8254_CTRL_SC0 | ME8254_CTRL_LM | ME8254_CTRL_M2 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_3) {
-			outb(ME8254_CTRL_SC0 | ME8254_CTRL_LM | ME8254_CTRL_M3 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_4) {
-			outb(ME8254_CTRL_SC0 | ME8254_CTRL_LM | ME8254_CTRL_M4 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_5) {
-			outb(ME8254_CTRL_SC0 | ME8254_CTRL_LM | ME8254_CTRL_M5 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else {
-			PERROR("Invalid single configuration.\n");
-			spin_unlock(&instance->subdevice_lock);
-			return ME_ERRNO_INVALID_SINGLE_CONFIG;
-		}
-	} else if (instance->ctr_idx == 1) {
-		if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_0) {
-			outb(ME8254_CTRL_SC1 | ME8254_CTRL_LM | ME8254_CTRL_M0 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_1) {
-			outb(ME8254_CTRL_SC1 | ME8254_CTRL_LM | ME8254_CTRL_M1 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_2) {
-			outb(ME8254_CTRL_SC1 | ME8254_CTRL_LM | ME8254_CTRL_M2 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_3) {
-			outb(ME8254_CTRL_SC1 | ME8254_CTRL_LM | ME8254_CTRL_M3 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_4) {
-			outb(ME8254_CTRL_SC1 | ME8254_CTRL_LM | ME8254_CTRL_M4 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_5) {
-			outb(ME8254_CTRL_SC1 | ME8254_CTRL_LM | ME8254_CTRL_M5 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else {
-			PERROR("Invalid single configuration.\n");
-			spin_unlock(&instance->subdevice_lock);
-			return ME_ERRNO_INVALID_SINGLE_CONFIG;
-		}
-	} else {
-		if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_0) {
-			outb(ME8254_CTRL_SC2 | ME8254_CTRL_LM | ME8254_CTRL_M0 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_1) {
-			outb(ME8254_CTRL_SC2 | ME8254_CTRL_LM | ME8254_CTRL_M1 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_2) {
-			outb(ME8254_CTRL_SC2 | ME8254_CTRL_LM | ME8254_CTRL_M2 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_3) {
-			outb(ME8254_CTRL_SC2 | ME8254_CTRL_LM | ME8254_CTRL_M3 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_4) {
-			outb(ME8254_CTRL_SC2 | ME8254_CTRL_LM | ME8254_CTRL_M4 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else if (single_config == ME_SINGLE_CONFIG_CTR_8254_MODE_5) {
-			outb(ME8254_CTRL_SC2 | ME8254_CTRL_LM | ME8254_CTRL_M5 |
-			     ME8254_CTRL_BIN, instance->ctrl_reg);
-		} else {
-			PERROR("Invalid single configuration.\n");
-			spin_unlock(&instance->subdevice_lock);
-			return ME_ERRNO_INVALID_SINGLE_CONFIG;
-		}
-	}
-
-	switch (instance->device_id) {
-	case PCI_DEVICE_ID_MEILHAUS_ME1400:
-	case PCI_DEVICE_ID_MEILHAUS_ME14E0:
-	case PCI_DEVICE_ID_MEILHAUS_ME140A:
-	case PCI_DEVICE_ID_MEILHAUS_ME14EA:
-	case PCI_DEVICE_ID_MEILHAUS_ME140B:
-	case PCI_DEVICE_ID_MEILHAUS_ME14EB:
-		err = me1400_ab_ref_config(instance, ref);
-
-		if (err) {
-			spin_unlock(&instance->subdevice_lock);
-			return err;
-		}
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		err = me1400_cd_ref_config(instance, ref);
-
-		if (err) {
-			spin_unlock(&instance->subdevice_lock);
-			return err;
-		}
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4610:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660IS:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670IS:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680IS:
-		err = me4600_ref_config(instance, ref);
-
-		if (err) {
-			spin_unlock(&instance->subdevice_lock);
-			return err;
-		}
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_A:
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_B:
-		err = me8100_ref_config(instance, ref);
-
-		if (err) {
-			spin_unlock(&instance->subdevice_lock);
-			return err;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid device type.\n");
-
-		spin_unlock(&instance->subdevice_lock);
-//                              spin_unlock(instance->clk_src_reg_lock);
-		return ME_ERRNO_INVALID_SINGLE_CONFIG;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8254_io_single_read(struct me_subdevice *subdevice,
-				 struct file *filep,
-				 int channel,
-				 int *value, int time_out, int flags)
-{
-	me8254_subdevice_t *instance;
-	uint16_t lo_byte;
-	uint16_t hi_byte;
-
-	PDEBUG("executed.\n");
-
-	if (channel) {
-		PERROR("Invalid channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	instance = (me8254_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	if (instance->ctr_idx == 0)
-		outb(ME8254_CTRL_SC0 | ME8254_CTRL_TLO, instance->ctrl_reg);
-	else if (instance->ctr_idx == 1)
-		outb(ME8254_CTRL_SC1 | ME8254_CTRL_TLO, instance->ctrl_reg);
-	else
-		outb(ME8254_CTRL_SC2 | ME8254_CTRL_TLO, instance->ctrl_reg);
-
-	lo_byte = inb(instance->val_reg);
-	hi_byte = inb(instance->val_reg);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	*value = lo_byte | (hi_byte << 8);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8254_io_single_write(struct me_subdevice *subdevice,
-				  struct file *filep,
-				  int channel,
-				  int value, int time_out, int flags)
-{
-	me8254_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	if (channel) {
-		PERROR("Invalid channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	instance = (me8254_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	outb(value, instance->val_reg);
-	outb((value >> 8), instance->val_reg);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8254_query_number_channels(struct me_subdevice *subdevice,
-					int *number)
-{
-	PDEBUG("executed.\n");
-	*number = ME8254_NUMBER_CHANNELS;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8254_query_subdevice_type(struct me_subdevice *subdevice,
-				       int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_CTR;
-	*subtype = ME_SUBTYPE_CTR_8254;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8254_query_subdevice_caps(struct me_subdevice *subdevice,
-				       int *caps)
-{
-	me8254_subdevice_t *instance;
-	PDEBUG("executed.\n");
-	instance = (me8254_subdevice_t *) subdevice;
-	*caps = instance->caps;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8254_query_subdevice_caps_args(struct me_subdevice *subdevice,
-					    int cap, int *args, int count)
-{
-	PDEBUG("executed.\n");
-
-	if (count != 1) {
-		PERROR("Invalid capability argument count.\n");
-		return ME_ERRNO_INVALID_CAP_ARG_COUNT;
-	}
-
-	if (cap == ME_CAP_CTR_WIDTH) {
-		args[0] = ME8254_CTR_WIDTH;
-	} else {
-		PERROR("Invalid capability.\n");
-		return ME_ERRNO_INVALID_CAP;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static uint32_t me1400AB_get_val_reg(uint32_t reg_base, unsigned int me8254_idx,
-				     unsigned int ctr_idx)
-{
-	switch (me8254_idx) {
-
-	case 0:
-		return (reg_base + ME1400AB_8254_A_0_VAL_REG + ctr_idx);
-
-	default:
-		return (reg_base + ME1400AB_8254_B_0_VAL_REG + ctr_idx);
-	}
-
-	return 0;
-}
-
-static uint32_t me1400AB_get_ctrl_reg(uint32_t reg_base,
-				      unsigned int me8254_idx,
-				      unsigned int ctr_idx)
-{
-	switch (me8254_idx) {
-	case 0:
-		return (reg_base + ME1400AB_8254_A_CTRL_REG);
-
-	default:
-		return (reg_base + ME1400AB_8254_B_CTRL_REG);
-	}
-
-	return 0;
-}
-
-static uint32_t me1400AB_get_clk_src_reg(uint32_t reg_base,
-					 unsigned int me8254_idx,
-					 unsigned int ctr_idx)
-{
-	switch (me8254_idx) {
-	case 0:
-		return (reg_base + ME1400AB_CLK_SRC_REG);
-
-	default:
-		return (reg_base + ME1400AB_CLK_SRC_REG);
-	}
-
-	return 0;
-}
-
-static uint32_t me1400CD_get_val_reg(uint32_t reg_base, unsigned int me8254_idx,
-				     unsigned int ctr_idx)
-{
-	switch (me8254_idx) {
-	case 0:
-		return (reg_base + ME1400C_8254_A_0_VAL_REG + ctr_idx);
-
-	case 1:
-		return (reg_base + ME1400C_8254_B_0_VAL_REG + ctr_idx);
-
-	case 2:
-		return (reg_base + ME1400C_8254_C_0_VAL_REG + ctr_idx);
-
-	case 3:
-		return (reg_base + ME1400C_8254_D_0_VAL_REG + ctr_idx);
-
-	case 4:
-		return (reg_base + ME1400C_8254_E_0_VAL_REG + ctr_idx);
-
-	case 5:
-		return (reg_base + ME1400D_8254_A_0_VAL_REG + ctr_idx);
-
-	case 6:
-		return (reg_base + ME1400D_8254_B_0_VAL_REG + ctr_idx);
-
-	case 7:
-		return (reg_base + ME1400D_8254_C_0_VAL_REG + ctr_idx);
-
-	case 8:
-		return (reg_base + ME1400D_8254_D_0_VAL_REG + ctr_idx);
-
-	default:
-		return (reg_base + ME1400D_8254_E_0_VAL_REG + ctr_idx);
-	}
-
-	return 0;
-}
-
-static uint32_t me1400CD_get_ctrl_reg(uint32_t reg_base,
-				      unsigned int me8254_idx,
-				      unsigned int ctr_idx)
-{
-	switch (me8254_idx) {
-	case 0:
-		return (reg_base + ME1400C_8254_A_CTRL_REG);
-
-	case 1:
-		return (reg_base + ME1400C_8254_B_CTRL_REG);
-
-	case 2:
-		return (reg_base + ME1400C_8254_C_CTRL_REG);
-
-	case 3:
-		return (reg_base + ME1400C_8254_D_CTRL_REG);
-
-	case 4:
-		return (reg_base + ME1400C_8254_E_CTRL_REG);
-
-	case 5:
-		return (reg_base + ME1400D_8254_A_CTRL_REG);
-
-	case 6:
-		return (reg_base + ME1400D_8254_B_CTRL_REG);
-
-	case 7:
-		return (reg_base + ME1400D_8254_C_CTRL_REG);
-
-	case 8:
-		return (reg_base + ME1400D_8254_D_CTRL_REG);
-
-	default:
-		return (reg_base + ME1400D_8254_E_CTRL_REG);
-	}
-
-	return 0;
-}
-
-static uint32_t me1400CD_get_clk_src_reg(uint32_t reg_base,
-					 unsigned int me8254_idx,
-					 unsigned int ctr_idx)
-{
-	switch (me8254_idx) {
-	case 0:
-		return (reg_base + ME1400C_CLK_SRC_0_REG);
-
-	case 1:
-		return (reg_base + ME1400C_CLK_SRC_0_REG);
-
-	case 2:
-		return (reg_base + ME1400C_CLK_SRC_1_REG);
-
-	case 3:
-		return (reg_base + ME1400C_CLK_SRC_1_REG);
-
-	case 4:
-		return (reg_base + ME1400C_CLK_SRC_2_REG);
-
-	case 5:
-		return (reg_base + ME1400D_CLK_SRC_0_REG);
-
-	case 6:
-		return (reg_base + ME1400D_CLK_SRC_0_REG);
-
-	case 7:
-		return (reg_base + ME1400D_CLK_SRC_1_REG);
-
-	case 8:
-		return (reg_base + ME1400D_CLK_SRC_1_REG);
-
-	default:
-		return (reg_base + ME1400D_CLK_SRC_2_REG);
-	}
-
-	return 0;
-}
-
-static uint32_t me4600_get_val_reg(uint32_t reg_base, unsigned int me8254_idx,
-				   unsigned int ctr_idx)
-{
-	return (reg_base + ME4600_8254_0_VAL_REG + ctr_idx);
-}
-
-static uint32_t me4600_get_ctrl_reg(uint32_t reg_base, unsigned int me8254_idx,
-				    unsigned int ctr_idx)
-{
-	return (reg_base + ME4600_8254_CTRL_REG);
-}
-
-static uint32_t me8100_get_val_reg(uint32_t reg_base, unsigned int me8254_idx,
-				   unsigned int ctr_idx)
-{
-	return (reg_base + ME8100_COUNTER_REG_0 + ctr_idx * 2);
-}
-
-static uint32_t me8100_get_ctrl_reg(uint32_t reg_base, unsigned int me8254_idx,
-				    unsigned int ctr_idx)
-{
-	return (reg_base + ME8100_COUNTER_CTRL_REG);
-}
-
-me8254_subdevice_t *me8254_constructor(uint32_t device_id,
-				       uint32_t reg_base,
-				       unsigned int me8254_idx,
-				       unsigned int ctr_idx,
-				       spinlock_t *ctrl_reg_lock,
-				       spinlock_t *clk_src_reg_lock)
-{
-	me8254_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	// Allocate memory for subdevice instance
-	subdevice = kmalloc(sizeof(me8254_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for 8254 instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me8254_subdevice_t));
-
-	// Check if counter index is out of range
-
-	if (ctr_idx > 2) {
-		PERROR("Counter index is out of range.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize subdevice base class
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-	subdevice->clk_src_reg_lock = clk_src_reg_lock;
-
-	// Save type of Meilhaus device
-	subdevice->device_id = device_id;
-
-	// Save the indices
-	subdevice->me8254_idx = me8254_idx;
-	subdevice->ctr_idx = ctr_idx;
-
-	// Do device specific initialization
-	switch (device_id) {
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140A:
-	case PCI_DEVICE_ID_MEILHAUS_ME14EA:
-		// Check if 8254 index is out of range
-		if (me8254_idx > 0) {
-			PERROR("8254 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140B:	// Fall through
-	case PCI_DEVICE_ID_MEILHAUS_ME14EB:
-		// Check if 8254 index is out of range
-		if (me8254_idx > 1) {
-			PERROR("8254 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-		// Initialize the counters capabilities
-		if (ctr_idx == 0)
-			subdevice->caps =
-			    ME_CAPS_CTR_CLK_INTERNAL_1MHZ |
-			    ME_CAPS_CTR_CLK_INTERNAL_10MHZ |
-			    ME_CAPS_CTR_CLK_EXTERNAL;
-		else
-			subdevice->caps =
-			    ME_CAPS_CTR_CLK_PREVIOUS | ME_CAPS_CTR_CLK_EXTERNAL;
-
-		// Get the counters registers
-		subdevice->val_reg =
-		    me1400AB_get_val_reg(reg_base, me8254_idx, ctr_idx);
-		subdevice->ctrl_reg =
-		    me1400AB_get_ctrl_reg(reg_base, me8254_idx, ctr_idx);
-		subdevice->clk_src_reg =
-		    me1400AB_get_clk_src_reg(reg_base, me8254_idx, ctr_idx);
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-		// Check if 8254 index is out of range
-		if (me8254_idx > 4) {
-			PERROR("8254 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		// Check if 8254 index is out of range
-		if (me8254_idx > 9) {
-			PERROR("8254 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-		// Initialize the counters capabilities
-		if (ctr_idx == 0) {
-			if (me8254_idx == 0)
-				subdevice->caps =
-				    ME_CAPS_CTR_CLK_PREVIOUS |
-				    ME_CAPS_CTR_CLK_INTERNAL_1MHZ |
-				    ME_CAPS_CTR_CLK_INTERNAL_10MHZ |
-				    ME_CAPS_CTR_CLK_EXTERNAL;
-			else
-				subdevice->caps =
-				    ME_CAPS_CTR_CLK_INTERNAL_1MHZ |
-				    ME_CAPS_CTR_CLK_INTERNAL_10MHZ |
-				    ME_CAPS_CTR_CLK_EXTERNAL;
-		} else
-			subdevice->caps =
-			    ME_CAPS_CTR_CLK_PREVIOUS | ME_CAPS_CTR_CLK_EXTERNAL;
-
-		// Get the counters registers
-		subdevice->val_reg =
-		    me1400CD_get_val_reg(reg_base, me8254_idx, ctr_idx);
-		subdevice->ctrl_reg =
-		    me1400CD_get_ctrl_reg(reg_base, me8254_idx, ctr_idx);
-		subdevice->clk_src_reg =
-		    me1400CD_get_clk_src_reg(reg_base, me8254_idx, ctr_idx);
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4610:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4660IS:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4670IS:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680I:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680S:
-	case PCI_DEVICE_ID_MEILHAUS_ME4680IS:
-		// Check if 8254 index is out of range
-		if (me8254_idx > 0) {
-			PERROR("8254 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-		// Initialize the counters capabilities
-		subdevice->caps = ME_CAPS_CTR_CLK_EXTERNAL;
-
-		// Get the counters registers
-		subdevice->val_reg =
-		    me4600_get_val_reg(reg_base, me8254_idx, ctr_idx);
-		subdevice->ctrl_reg =
-		    me4600_get_ctrl_reg(reg_base, me8254_idx, ctr_idx);
-		subdevice->clk_src_reg = 0;	// Not used
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_A:
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_B:
-		// Check if 8254 index is out of range
-		if (me8254_idx > 0) {
-			PERROR("8254 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-		// Initialize the counters capabilities
-		subdevice->caps = ME_CAPS_CTR_CLK_EXTERNAL;
-
-		// Get the counters registers
-		subdevice->val_reg =
-		    me8100_get_val_reg(reg_base, me8254_idx, ctr_idx);
-		subdevice->ctrl_reg =
-		    me8100_get_ctrl_reg(reg_base, me8254_idx, ctr_idx);
-		subdevice->clk_src_reg = 0;	// Not used
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4650:
-	case PCI_DEVICE_ID_MEILHAUS_ME1400:
-	case PCI_DEVICE_ID_MEILHAUS_ME14E0:
-		PERROR("No 8254 subdevices available for subdevice device.\n");
-		me_subdevice_deinit(&subdevice->base);
-		kfree(subdevice);
-		return NULL;
-
-	default:
-		PERROR("Unknown device type.\n");
-		me_subdevice_deinit(&subdevice->base);
-		kfree(subdevice);
-		return NULL;
-	}
-
-	// Overload subdevice base class methods.
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me8254_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config = me8254_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me8254_io_single_read;
-	subdevice->base.me_subdevice_io_single_write = me8254_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me8254_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me8254_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me8254_query_subdevice_caps;
-	subdevice->base.me_subdevice_query_subdevice_caps_args =
-	    me8254_query_subdevice_caps_args;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me8254.h b/drivers/staging/meilhaus/me8254.h
deleted file mode 100644
index 572b719..0000000
--- a/drivers/staging/meilhaus/me8254.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/**
- * @file me8254.h
- *
- * @brief 8254 counter implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ME8254_H_
-#define _ME8254_H_
-
-#include "mesubdevice.h"
-#include "meslock.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The 8254 subdevice class.
- */
-typedef struct me8254_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect the control register from concurrent access. */
-	spinlock_t *clk_src_reg_lock;		/**< Spin lock to protect the clock source register from concurrent access. */
-
-	uint32_t device_id;			/**< The Meilhaus device type carrying the 8254 chip. */
-	int me8254_idx;				/**< The index of the 8254 chip on the device. */
-	int ctr_idx;				/**< The index of the counter on the 8254 chip. */
-
-	int caps;				/**< Holds the device capabilities. */
-
-	unsigned long val_reg;			/**< Holds the actual counter value. */
-	unsigned long ctrl_reg;			/**< Register to configure the 8254 modes. */
-	unsigned long clk_src_reg;		/**< Register to configure the counter connections. */
-} me8254_subdevice_t;
-
-/**
- * @brief The constructor to generate a 8254 instance.
- *
- * @param device_id The kind of Meilhaus device holding the 8254.
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param me8254_idx The index of the 8254 chip on the Meilhaus device.
- * @param ctr_idx The index of the counter inside a 8254 chip.
- * @param ctrl_reg_lock Pointer to spin lock protecting the 8254 control register from concurrent access.
- * @param clk_src_reg_lock Pointer to spin lock protecting the clock source register from concurrent access.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me8254_subdevice_t *me8254_constructor(uint32_t device_id,
-				       uint32_t reg_base,
-				       unsigned int me8254_idx,
-				       unsigned int ctr_idx,
-				       spinlock_t * ctrl_reg_lock,
-				       spinlock_t * clk_src_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8254_reg.h b/drivers/staging/meilhaus/me8254_reg.h
deleted file mode 100644
index 7e2c36b..0000000
--- a/drivers/staging/meilhaus/me8254_reg.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/**
- * @file me8254_reg.h
- *
- * @brief 8254 counter register definitions.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _ME8254_REG_H_
-#define _ME8254_REG_H_
-
-#ifdef __KERNEL__
-
-/* ME1400 A/B register offsets */
-#define ME1400AB_8254_A_0_VAL_REG		0x0004 /**< Offset of 8254 A counter 0 value register. */
-#define ME1400AB_8254_A_1_VAL_REG		0x0005 /**< Offset of 8254 A counter 1 value register. */
-#define ME1400AB_8254_A_2_VAL_REG		0x0006 /**< Offset of 8254 A counter 2 value register. */
-#define ME1400AB_8254_A_CTRL_REG		0x0007 /**< Offset of 8254 A control register. */
-
-#define ME1400AB_8254_B_0_VAL_REG		0x000C /**< Offset of 8254 B counter 0 value register. */
-#define ME1400AB_8254_B_1_VAL_REG		0x000D /**< Offset of 8254 B counter 1 value register. */
-#define ME1400AB_8254_B_2_VAL_REG		0x000E /**< Offset of 8254 B counter 2 value register. */
-#define ME1400AB_8254_B_CTRL_REG		0x000F /**< Offset of 8254 B control register. */
-
-#define ME1400AB_CLK_SRC_REG			0x0010 /**< Offset of clock source register. */
-
-/* ME1400 C register offsets */
-#define ME1400C_8254_A_0_VAL_REG		0x0004 /**< Offset of 8254 A counter 0 value register. */
-#define ME1400C_8254_A_1_VAL_REG		0x0005 /**< Offset of 8254 A counter 0 value register. */
-#define ME1400C_8254_A_2_VAL_REG		0x0006 /**< Offset of 8254 A counter 0 value register. */
-#define ME1400C_8254_A_CTRL_REG			0x0007 /**< Offset of 8254 A control register. */
-
-#define ME1400C_8254_B_0_VAL_REG		0x000C /**< Offset of 8254 B counter 0 value register. */
-#define ME1400C_8254_B_1_VAL_REG		0x000D /**< Offset of 8254 B counter 0 value register. */
-#define ME1400C_8254_B_2_VAL_REG		0x000E /**< Offset of 8254 B counter 0 value register. */
-#define ME1400C_8254_B_CTRL_REG			0x000F /**< Offset of 8254 B control register. */
-
-#define ME1400C_8254_C_0_VAL_REG		0x0010 /**< Offset of 8254 C counter 0 value register. */
-#define ME1400C_8254_C_1_VAL_REG		0x0011 /**< Offset of 8254 C counter 0 value register. */
-#define ME1400C_8254_C_2_VAL_REG		0x0012 /**< Offset of 8254 C counter 0 value register. */
-#define ME1400C_8254_C_CTRL_REG			0x0013 /**< Offset of 8254 C control register. */
-
-#define ME1400C_8254_D_0_VAL_REG		0x0014 /**< Offset of 8254 D counter 0 value register. */
-#define ME1400C_8254_D_1_VAL_REG		0x0015 /**< Offset of 8254 D counter 0 value register. */
-#define ME1400C_8254_D_2_VAL_REG		0x0016 /**< Offset of 8254 D counter 0 value register. */
-#define ME1400C_8254_D_CTRL_REG			0x0017 /**< Offset of 8254 D control register. */
-
-#define ME1400C_8254_E_0_VAL_REG		0x0018 /**< Offset of 8254 E counter 0 value register. */
-#define ME1400C_8254_E_1_VAL_REG		0x0019 /**< Offset of 8254 E counter 0 value register. */
-#define ME1400C_8254_E_2_VAL_REG		0x001A /**< Offset of 8254 E counter 0 value register. */
-#define ME1400C_8254_E_CTRL_REG			0x001B /**< Offset of 8254 E control register. */
-
-#define ME1400C_CLK_SRC_0_REG  			0x001C /**< Offset of clock source register 0. */
-#define ME1400C_CLK_SRC_1_REG  			0x001D /**< Offset of clock source register 1. */
-#define ME1400C_CLK_SRC_2_REG  			0x001E /**< Offset of clock source register 2. */
-
-/* ME1400 D register offsets */
-#define ME1400D_8254_A_0_VAL_REG		0x0044 /**< Offset of 8254 A counter 0 value register. */
-#define ME1400D_8254_A_1_VAL_REG		0x0045 /**< Offset of 8254 A counter 0 value register. */
-#define ME1400D_8254_A_2_VAL_REG		0x0046 /**< Offset of 8254 A counter 0 value register. */
-#define ME1400D_8254_A_CTRL_REG			0x0047 /**< Offset of 8254 A control register. */
-
-#define ME1400D_8254_B_0_VAL_REG		0x004C /**< Offset of 8254 B counter 0 value register. */
-#define ME1400D_8254_B_1_VAL_REG		0x004D /**< Offset of 8254 B counter 0 value register. */
-#define ME1400D_8254_B_2_VAL_REG		0x004E /**< Offset of 8254 B counter 0 value register. */
-#define ME1400D_8254_B_CTRL_REG			0x004F /**< Offset of 8254 B control register. */
-
-#define ME1400D_8254_C_0_VAL_REG		0x0050 /**< Offset of 8254 C counter 0 value register. */
-#define ME1400D_8254_C_1_VAL_REG		0x0051 /**< Offset of 8254 C counter 0 value register. */
-#define ME1400D_8254_C_2_VAL_REG		0x0052 /**< Offset of 8254 C counter 0 value register. */
-#define ME1400D_8254_C_CTRL_REG			0x0053 /**< Offset of 8254 C control register. */
-
-#define ME1400D_8254_D_0_VAL_REG		0x0054 /**< Offset of 8254 D counter 0 value register. */
-#define ME1400D_8254_D_1_VAL_REG		0x0055 /**< Offset of 8254 D counter 0 value register. */
-#define ME1400D_8254_D_2_VAL_REG		0x0056 /**< Offset of 8254 D counter 0 value register. */
-#define ME1400D_8254_D_CTRL_REG			0x0057 /**< Offset of 8254 D control register. */
-
-#define ME1400D_8254_E_0_VAL_REG		0x0058 /**< Offset of 8254 E counter 0 value register. */
-#define ME1400D_8254_E_1_VAL_REG		0x0059 /**< Offset of 8254 E counter 0 value register. */
-#define ME1400D_8254_E_2_VAL_REG		0x005A /**< Offset of 8254 E counter 0 value register. */
-#define ME1400D_8254_E_CTRL_REG			0x005B /**< Offset of 8254 E control register. */
-
-#define ME1400D_CLK_SRC_0_REG  			0x005C /**< Offset of clock source register 0. */
-#define ME1400D_CLK_SRC_1_REG  			0x005D /**< Offset of clock source register 1. */
-#define ME1400D_CLK_SRC_2_REG  			0x005E /**< Offset of clock source register 2. */
-
-/* ME4600 register offsets */
-#define ME4600_8254_0_VAL_REG			0x0000 /**< Offset of 8254 A counter 0 value register. */
-#define ME4600_8254_1_VAL_REG			0x0001 /**< Offset of 8254 A counter 0 value register. */
-#define ME4600_8254_2_VAL_REG			0x0002 /**< Offset of 8254 A counter 0 value register. */
-#define ME4600_8254_CTRL_REG			0x0003 /**< Offset of 8254 A control register. */
-
-/* Command words for 8254 control register */
-#define ME8254_CTRL_SC0   0x00	 /**< Counter 0 selection. */
-#define ME8254_CTRL_SC1   0x40	 /**< Counter 1 selection. */
-#define ME8254_CTRL_SC2   0x80	 /**< Counter 2 selection. */
-
-#define ME8254_CTRL_TLO   0x00	 /**< Counter latching operation. */
-#define ME8254_CTRL_LSB   0x10	 /**< Only read LSB. */
-#define ME8254_CTRL_MSB   0x20	 /**< Only read MSB. */
-#define ME8254_CTRL_LM    0x30	 /**< First read LSB, then MSB.  */
-
-#define ME8254_CTRL_M0    0x00	 /**< Mode 0 selection. */
-#define ME8254_CTRL_M1    0x02	 /**< Mode 1 selection. */
-#define ME8254_CTRL_M2    0x04	 /**< Mode 2 selection. */
-#define ME8254_CTRL_M3    0x06	 /**< Mode 3 selection. */
-#define ME8254_CTRL_M4    0x08	 /**< Mode 4 selection. */
-#define ME8254_CTRL_M5    0x0A	 /**< Mode 5 selection. */
-
-#define ME8254_CTRL_BIN   0x00	 /**< Binary counter. */
-#define ME8254_CTRL_BCD   0x01	 /**< BCD counter. */
-
-/* ME-1400 A/B clock source register bits */
-#define ME1400AB_8254_A_0_CLK_SRC_1MHZ		(0 << 7)	/**< 1MHz clock. */
-#define ME1400AB_8254_A_0_CLK_SRC_10MHZ		(1 << 7)	/**< 10MHz clock. */
-#define ME1400AB_8254_A_0_CLK_SRC_PIN		(0 << 6)	/**< CLK 0 to SUB-D. */
-#define ME1400AB_8254_A_0_CLK_SRC_QUARZ		(1 << 6)	/**< Connect CLK 0 with quarz. */
-
-#define ME1400AB_8254_A_1_CLK_SRC_PIN		(0 << 5)	/**< CLK 1 to SUB-D. */
-#define ME1400AB_8254_A_1_CLK_SRC_PREV		(1 << 5)	/**< Connect OUT 0 with CLK 1. */
-
-#define ME1400AB_8254_A_2_CLK_SRC_PIN		(0 << 4)	/**< CLK 2 to SUB-D. */
-#define ME1400AB_8254_A_2_CLK_SRC_PREV		(1 << 4)	/**< Connect OUT 1 with CLK 2. */
-
-#define ME1400AB_8254_B_0_CLK_SRC_1MHZ		(0 << 3)	/**< 1MHz clock. */
-#define ME1400AB_8254_B_0_CLK_SRC_10MHZ		(1 << 3)	/**< 10MHz clock. */
-#define ME1400AB_8254_B_0_CLK_SRC_PIN		(0 << 2)	/**< CLK 0 to SUB-D. */
-#define ME1400AB_8254_B_0_CLK_SRC_QUARZ		(1 << 2)	/**< Connect CLK 0 with quarz. */
-
-#define ME1400AB_8254_B_1_CLK_SRC_PIN		(0 << 1)	/**< CLK 1 to SUB-D. */
-#define ME1400AB_8254_B_1_CLK_SRC_PREV		(1 << 1)	/**< Connect OUT 0 with CLK 1. */
-
-#define ME1400AB_8254_B_2_CLK_SRC_PIN		(0 << 0)	/**< CLK 2 to SUB-D. */
-#define ME1400AB_8254_B_2_CLK_SRC_PREV		(1 << 0)	/**< Connect OUT 1 with CLK 2. */
-
-/* ME-1400 C/D clock source registers bits */
-#define ME1400CD_8254_ACE_0_CLK_SRC_MASK	0x03	/**< Masks all CLK source bits. */
-#define ME1400CD_8254_ACE_0_CLK_SRC_PIN		0x00	/**< Connect CLK to SUB-D. */
-#define ME1400CD_8254_ACE_0_CLK_SRC_1MHZ	0x01	/**< Connect CLK to 1MHz. */
-#define ME1400CD_8254_ACE_0_CLK_SRC_10MHZ	0x02	/**< Connect CLK to 10MHz. */
-#define ME1400CD_8254_ACE_0_CLK_SRC_PREV	0x03	/**< Connect CLK to previous counter output on ME-1400 D extension. */
-
-#define ME1400CD_8254_ACE_1_CLK_SRC_MASK	0x04	/**< Masks all CLK source bits. */
-#define ME1400CD_8254_ACE_1_CLK_SRC_PIN		0x00	/**< Connect CLK to SUB-D. */
-#define ME1400CD_8254_ACE_1_CLK_SRC_PREV	0x04	/**< Connect CLK to previous counter output. */
-
-#define ME1400CD_8254_ACE_2_CLK_SRC_MASK	0x08	/**< Masks all CLK source bits. */
-#define ME1400CD_8254_ACE_2_CLK_SRC_PIN		0x00	/**< Connect to SUB-D. */
-#define ME1400CD_8254_ACE_2_CLK_SRC_PREV	0x08	/**< Connect CLK to previous counter output. */
-
-#define ME1400CD_8254_BD_0_CLK_SRC_MASK		0x30	/**< Masks all CLK source bits. */
-#define ME1400CD_8254_BD_0_CLK_SRC_PIN		0x00	/**< Connect CLK to SUB-D. */
-#define ME1400CD_8254_BD_0_CLK_SRC_1MHZ		0x10	/**< Connect CLK to 1MHz. */
-#define ME1400CD_8254_BD_0_CLK_SRC_10MHZ	0x20	/**< Connect CLK to 10MHz. */
-#define ME1400CD_8254_BD_0_CLK_SRC_PREV		0x30	/**< Connect CLK to previous counter output. */
-
-#define ME1400CD_8254_BD_1_CLK_SRC_MASK		0x40	/**< Masks all CLK source bits. */
-#define ME1400CD_8254_BD_1_CLK_SRC_PIN		0x00	/**< Connect CLK to SUB-D. */
-#define ME1400CD_8254_BD_1_CLK_SRC_PREV		0x40	/**< Connect CLK to previous counter output. */
-
-#define ME1400CD_8254_BD_2_CLK_SRC_MASK		0x80	/**< Masks all CLK source bits. */
-#define ME1400CD_8254_BD_2_CLK_SRC_PIN		0x00	/**< Connect CLK to SUB-D. */
-#define ME1400CD_8254_BD_2_CLK_SRC_PREV		0x80	/**< Connect CLK to previous counter output. */
-
-/* ME-8100 counter registers */
-#define ME8100_COUNTER_REG_0				0x18	//(r,w)
-#define ME8100_COUNTER_REG_1				0x1A	//(r,w)
-#define ME8100_COUNTER_REG_2				0x1C	//(r,w)
-#define ME8100_COUNTER_CTRL_REG				0x1E	//(r,w)
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8255.c b/drivers/staging/meilhaus/me8255.c
deleted file mode 100644
index ec9c638..0000000
--- a/drivers/staging/meilhaus/me8255.c
+++ /dev/null
@@ -1,462 +0,0 @@
-/**
- * @file me8255.c
- *
- * @brief 8255 subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-#include "medebug.h"
-
-#include "me8255_reg.h"
-#include "me8255.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static uint8_t get_mode_from_mirror(uint32_t mirror)
-{
-	PDEBUG("executed.\n");
-
-	if (mirror & ME8255_PORT_0_OUTPUT) {
-		if (mirror & ME8255_PORT_1_OUTPUT) {
-			if (mirror & ME8255_PORT_2_OUTPUT) {
-				return ME8255_MODE_OOO;
-			} else {
-				return ME8255_MODE_IOO;
-			}
-		} else {
-			if (mirror & ME8255_PORT_2_OUTPUT) {
-				return ME8255_MODE_OIO;
-			} else {
-				return ME8255_MODE_IIO;
-			}
-		}
-	} else {
-		if (mirror & ME8255_PORT_1_OUTPUT) {
-			if (mirror & ME8255_PORT_2_OUTPUT) {
-				return ME8255_MODE_OOI;
-			} else {
-				return ME8255_MODE_IOI;
-			}
-		} else {
-			if (mirror & ME8255_PORT_2_OUTPUT) {
-				return ME8255_MODE_OII;
-			} else {
-				return ME8255_MODE_III;
-			}
-		}
-	}
-}
-
-static int me8255_io_reset_subdevice(struct me_subdevice *subdevice,
-				     struct file *filep, int flags)
-{
-	me8255_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8255_subdevice_t *) subdevice;
-
-	if (flags) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	spin_lock(instance->ctrl_reg_lock);
-	*instance->ctrl_reg_mirror &=
-	    ~(ME8255_PORT_0_OUTPUT << instance->dio_idx);
-	outb(get_mode_from_mirror(*instance->ctrl_reg_mirror),
-	     instance->ctrl_reg);
-	spin_unlock(instance->ctrl_reg_lock);
-
-	outb(0, instance->port_reg);
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8255_io_single_config(struct me_subdevice *subdevice,
-				   struct file *filep,
-				   int channel,
-				   int single_config,
-				   int ref,
-				   int trig_chan,
-				   int trig_type, int trig_edge, int flags)
-{
-	me8255_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8255_subdevice_t *) subdevice;
-
-	if (flags & ~ME_IO_SINGLE_CONFIG_DIO_BYTE) {
-		PERROR("Invalid flag specified.\n");
-		return ME_ERRNO_INVALID_FLAGS;
-	}
-
-	if (channel) {
-		PERROR("Invalid channel.\n");
-		return ME_ERRNO_INVALID_CHANNEL;
-	}
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	if (single_config == ME_SINGLE_CONFIG_DIO_INPUT) {
-		spin_lock(instance->ctrl_reg_lock);
-		*instance->ctrl_reg_mirror &=
-		    ~(ME8255_PORT_0_OUTPUT << instance->dio_idx);
-		outb(get_mode_from_mirror(*instance->ctrl_reg_mirror),
-		     instance->ctrl_reg);
-		spin_unlock(instance->ctrl_reg_lock);
-	} else if (single_config == ME_SINGLE_CONFIG_DIO_OUTPUT) {
-		spin_lock(instance->ctrl_reg_lock);
-		*instance->ctrl_reg_mirror |=
-		    (ME8255_PORT_0_OUTPUT << instance->dio_idx);
-		outb(get_mode_from_mirror(*instance->ctrl_reg_mirror),
-		     instance->ctrl_reg);
-		spin_unlock(instance->ctrl_reg_lock);
-	} else {
-		PERROR("Invalid port direction.\n");
-		err = ME_ERRNO_INVALID_SINGLE_CONFIG;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8255_io_single_read(struct me_subdevice *subdevice,
-				 struct file *filep,
-				 int channel,
-				 int *value, int time_out, int flags)
-{
-	me8255_subdevice_t *instance;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8255_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			*value = inb(instance->port_reg) & (0x1 << channel);
-		} else {
-			PERROR("Invalid bit number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			*value = inb(instance->port_reg);
-		} else {
-			PERROR("Invalid byte number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8255_io_single_write(struct me_subdevice *subdevice,
-				  struct file *filep,
-				  int channel,
-				  int value, int time_out, int flags)
-{
-	me8255_subdevice_t *instance;
-	uint8_t byte;
-	int err = ME_ERRNO_SUCCESS;
-
-	PDEBUG("executed.\n");
-
-	instance = (me8255_subdevice_t *) subdevice;
-
-	ME_SUBDEVICE_ENTER;
-
-	spin_lock(&instance->subdevice_lock);
-	switch (flags) {
-	case ME_IO_SINGLE_TYPE_DIO_BIT:
-		if ((channel >= 0) && (channel < 8)) {
-			if (*instance->
-			    ctrl_reg_mirror & (ME8255_PORT_0_OUTPUT <<
-					       instance->dio_idx)) {
-				byte = inb(instance->port_reg);
-
-				if (value)
-					byte |= 0x1 << channel;
-				else
-					byte &= ~(0x1 << channel);
-
-				outb(byte, instance->port_reg);
-			} else {
-				PERROR("Port not in output mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid bit number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	case ME_IO_SINGLE_NO_FLAGS:
-	case ME_IO_SINGLE_TYPE_DIO_BYTE:
-		if (channel == 0) {
-			if (*instance->
-			    ctrl_reg_mirror & (ME8255_PORT_0_OUTPUT <<
-					       instance->dio_idx)) {
-				outb(value, instance->port_reg);
-			} else {
-				PERROR("Port not in output mode.\n");
-				err = ME_ERRNO_PREVIOUS_CONFIG;
-			}
-		} else {
-			PERROR("Invalid byte number.\n");
-			err = ME_ERRNO_INVALID_CHANNEL;
-		}
-		break;
-
-	default:
-		PERROR("Invalid flags specified.\n");
-		err = ME_ERRNO_INVALID_FLAGS;
-	}
-	spin_unlock(&instance->subdevice_lock);
-
-	ME_SUBDEVICE_EXIT;
-
-	return err;
-}
-
-static int me8255_query_number_channels(struct me_subdevice *subdevice,
-					int *number)
-{
-	PDEBUG("executed.\n");
-	*number = ME8255_NUMBER_CHANNELS;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8255_query_subdevice_type(struct me_subdevice *subdevice,
-				       int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = ME_TYPE_DIO;
-	*subtype = ME_SUBTYPE_SINGLE;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me8255_query_subdevice_caps(struct me_subdevice *subdevice,
-				       int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = ME_CAPS_DIO_DIR_BYTE;
-	return ME_ERRNO_SUCCESS;
-}
-
-me8255_subdevice_t *me8255_constructor(uint32_t device_id,
-				       uint32_t reg_base,
-				       unsigned int me8255_idx,
-				       unsigned int dio_idx,
-				       int *ctrl_reg_mirror,
-				       spinlock_t *ctrl_reg_lock)
-{
-	me8255_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(me8255_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for 8255 instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(me8255_subdevice_t));
-
-	/* Check if counter index is out of range */
-
-	if (dio_idx > 2) {
-		PERROR("DIO index is out of range.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save the pointer to global port settings */
-	subdevice->ctrl_reg_mirror = ctrl_reg_mirror;
-
-	/* Save type of Meilhaus device */
-	subdevice->device_id = device_id;
-
-	/* Save the indices */
-	subdevice->me8255_idx = me8255_idx;
-	subdevice->dio_idx = dio_idx;
-
-	/* Do device specific initialization */
-	switch (device_id) {
-	case PCI_DEVICE_ID_MEILHAUS_ME1400:
-	case PCI_DEVICE_ID_MEILHAUS_ME14E0:
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140A:
-	case PCI_DEVICE_ID_MEILHAUS_ME14EA:
-		/* Check if 8255 index is out of range */
-		if (me8255_idx > 0) {
-			PERROR("8255 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140B:	/* Fall through */
-	case PCI_DEVICE_ID_MEILHAUS_ME14EB:
-		/* Check if 8255 index is out of range */
-		if (me8255_idx > 1) {
-			PERROR("8255 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-
-		/* Get the registers */
-		if (me8255_idx == 0) {
-			subdevice->ctrl_reg = reg_base + ME1400AB_PORT_A_CTRL;
-			subdevice->port_reg =
-			    reg_base + ME1400AB_PORT_A_0 + dio_idx;
-		} else if (me8255_idx == 1) {
-			subdevice->ctrl_reg = reg_base + ME1400AB_PORT_B_CTRL;
-			subdevice->port_reg =
-			    reg_base + ME1400AB_PORT_B_0 + dio_idx;
-		}
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-		/* Check if 8255 index is out of range */
-		if (me8255_idx > 0) {
-			PERROR("8255 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:	/* Fall through */
-		/* Check if 8255 index is out of range */
-		if (me8255_idx > 1) {
-			PERROR("8255 index is out of range.\n");
-			me_subdevice_deinit(&subdevice->base);
-			kfree(subdevice);
-			return NULL;
-		}
-
-		/* Get the registers */
-		if (me8255_idx == 0) {
-			subdevice->ctrl_reg = reg_base + ME1400CD_PORT_A_CTRL;
-			subdevice->port_reg =
-			    reg_base + ME1400CD_PORT_A_0 + dio_idx;
-		} else if (me8255_idx == 1) {
-			subdevice->ctrl_reg = reg_base + ME1400CD_PORT_B_CTRL;
-			subdevice->port_reg =
-			    reg_base + ME1400CD_PORT_B_0 + dio_idx;
-		}
-
-		break;
-
-	default:
-		PERROR("Unknown device type. dev ID: 0x%04x\n", device_id);
-
-		me_subdevice_deinit(&subdevice->base);
-
-		kfree(subdevice);
-
-		return NULL;
-	}
-
-	/* Overload subdevice base class methods. */
-	subdevice->base.me_subdevice_io_reset_subdevice =
-	    me8255_io_reset_subdevice;
-	subdevice->base.me_subdevice_io_single_config = me8255_io_single_config;
-	subdevice->base.me_subdevice_io_single_read = me8255_io_single_read;
-	subdevice->base.me_subdevice_io_single_write = me8255_io_single_write;
-	subdevice->base.me_subdevice_query_number_channels =
-	    me8255_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    me8255_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    me8255_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/me8255.h b/drivers/staging/meilhaus/me8255.h
deleted file mode 100644
index 3382300..0000000
--- a/drivers/staging/meilhaus/me8255.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/**
- * @file me8255.h
- *
- * @brief Meilhaus PIO 8255 implementation.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _ME8255_H_
-#define _ME8255_H_
-
-#include "mesubdevice.h"
-#include "meslock.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The 8255 subdevice class.
- */
-typedef struct me8255_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-
-	int *ctrl_reg_mirror;			/**< Pointer to mirror of the control register. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg and #ctrl_reg_mirror from concurrent access. */
-
-	uint32_t device_id;				/**< The PCI device id of the device holding the 8255 chip. */
-	int me8255_idx;					/**< The index of the 8255 chip on the device. */
-	int dio_idx;					/**< The index of the DIO port on the 8255 chip. */
-
-	unsigned long port_reg;			/**< Register to read or write a value from or to the port respectively. */
-	unsigned long ctrl_reg;			/**< Register to configure the 8255 modes. */
-} me8255_subdevice_t;
-
-/**
- * @brief The constructor to generate a 8255 instance.
- *
- * @param device_id The kind of Meilhaus device holding the 8255.
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param me8255_idx The index of the 8255 chip on the Meilhaus device.
- * @param dio_idx The index of the counter inside a 8255 chip.
- * @param ctr_reg_mirror Pointer to mirror of control register.
- * @param ctrl_reg_lock Pointer to spin lock protecting the 8255 control register and #ctrl_reg_mirror from concurrent access.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-me8255_subdevice_t *me8255_constructor(uint32_t device_id,
-				       uint32_t reg_base,
-				       unsigned int me8255_idx,
-				       unsigned int dio_idx,
-				       int *ctrl_reg_mirror,
-				       spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/me8255_reg.h b/drivers/staging/meilhaus/me8255_reg.h
deleted file mode 100644
index d1dea1a..0000000
--- a/drivers/staging/meilhaus/me8255_reg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/**
- * @file me8255_reg.h
- *
- * @brief 8255 counter register definitions.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _ME8255_REG_H_
-#define _ME8255_REG_H_
-
-#ifdef __KERNEL__
-
-#define ME8255_NUMBER_CHANNELS		8		/**< The number of channels per 8255 port. */
-
-#define ME1400AB_PORT_A_0			0x0000	/**< Port 0 offset. */
-#define ME1400AB_PORT_A_1			0x0001	/**< Port 1 offset. */
-#define ME1400AB_PORT_A_2			0x0002	/**< Port 2 offset. */
-#define ME1400AB_PORT_A_CTRL		0x0003	/**< Control register for 8255 A. */
-
-#define ME1400AB_PORT_B_0			0x0008	/**< Port 0 offset. */
-#define ME1400AB_PORT_B_1			0x0009	/**< Port 1 offset. */
-#define ME1400AB_PORT_B_2			0x000A	/**< Port 2 offset. */
-#define ME1400AB_PORT_B_CTRL		0x000B	/**< Control register for 8255 B. */
-
-#define ME1400CD_PORT_A_0			0x0000	/**< Port 0 offset. */
-#define ME1400CD_PORT_A_1			0x0001	/**< Port 1 offset. */
-#define ME1400CD_PORT_A_2			0x0002	/**< Port 2 offset. */
-#define ME1400CD_PORT_A_CTRL		0x0003	/**< Control register for 8255 A. */
-
-#define ME1400CD_PORT_B_0			0x0040	/**< Port 0 offset. */
-#define ME1400CD_PORT_B_1			0x0041	/**< Port 1 offset. */
-#define ME1400CD_PORT_B_2			0x0042	/**< Port 2 offset. */
-#define ME1400CD_PORT_B_CTRL		0x0043	/**< Control register for 8255 B. */
-
-#define ME8255_MODE_OOO				0x80	/**< Port 2 = Output, Port 1 = Output, Port 0 = Output */
-#define ME8255_MODE_IOO				0x89	/**< Port 2 = Input,  Port 1 = Output, Port 0 = Output */
-#define ME8255_MODE_OIO				0x82	/**< Port 2 = Output, Port 1 = Input,  Port 0 = Output */
-#define ME8255_MODE_IIO				0x8B	/**< Port 2 = Input,  Port 1 = Input,  Port 0 = Output */
-#define ME8255_MODE_OOI				0x90	/**< Port 2 = Output, Port 1 = Output, Port 0 = Input */
-#define ME8255_MODE_IOI				0x99	/**< Port 2 = Input,  Port 1 = Output, Port 0 = Input */
-#define ME8255_MODE_OII				0x92	/**< Port 2 = Output, Port 1 = Input,  Port 0 = Input */
-#define ME8255_MODE_III				0x9B	/**< Port 2 = Input,  Port 1 = Input,  Port 0 = Input */
-
-#define ME8255_PORT_0_OUTPUT		0x1		/**< If set in mirror then port 0 is in output mode. */
-#define ME8255_PORT_1_OUTPUT		0x2		/**< If set in mirror then port 1 is in output mode. */
-#define ME8255_PORT_2_OUTPUT		0x4		/**< If set in mirror then port 2 is in output mode. */
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/mecirc_buf.h b/drivers/staging/meilhaus/mecirc_buf.h
deleted file mode 100644
index 5166585..0000000
--- a/drivers/staging/meilhaus/mecirc_buf.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/**
- * @file mecirc_buf.h
- *
- * @brief Meilhaus circular buffer implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke  (k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _MECIRC_BUF_H_
-#define _MECIRC_BUF_H_
-
-# ifdef __KERNEL__
-
-#  ifdef BOSCH
-
-typedef struct me_circ_buf {
-	unsigned int mask;
-//      unsigned int count;
-	uint32_t *buf;
-	int volatile head;
-	int volatile tail;
-} me_circ_buf_t;
-
-static inline int me_circ_buf_values(me_circ_buf_t * buf)
-{
-//      return ((buf->head - buf->tail) & (buf->count - 1));
-	return ((buf->head - buf->tail) & (buf->mask));
-}
-
-static inline int me_circ_buf_space(me_circ_buf_t * buf)
-{
-//      return ((buf->tail - (buf->head + 1)) & (buf->count - 1));
-	return ((buf->tail - (buf->head + 1)) & (buf->mask));
-}
-
-static inline int me_circ_buf_values_to_end(me_circ_buf_t * buf)
-{
-	int end;
-	int n;
-//      end = buf->count - buf->tail;
-//      n = (buf->head + end) & (buf->count - 1);
-	end = buf->mask + 1 - buf->tail;
-	n = (buf->head + end) & (buf->mask);
-	return (n < end) ? n : end;
-}
-
-static inline int me_circ_buf_space_to_end(me_circ_buf_t * buf)
-{
-	int end;
-	int n;
-
-//      end = buf->count - 1 - buf->head;
-//      n = (end + buf->tail) & (buf->count - 1);
-	end = buf->mask - buf->head;
-	n = (end + buf->tail) & (buf->mask);
-	return (n <= end) ? n : (end + 1);
-}
-
-#define _CBUFF_32b_t
-
-#  else	//~BOSCH
-/// @note buf->mask = buf->count-1 = ME4600_AI_CIRC_BUF_COUNT-1
-
-#   ifdef _CBUFF_32b_t
-	//32 bit
-typedef struct me_circ_buf_32b {
-	int volatile head;
-	int volatile tail;
-	unsigned int mask;	//buffor size-1 must be 2^n-1 to work
-	uint32_t *buf;
-} me_circ_buf_t;
-#   else
-	//16 bit
-typedef struct me_circ_buf_16b {
-	int volatile head;
-	int volatile tail;
-	unsigned int mask;	//buffor size-1 must be 2^n-1 to work
-	uint16_t *buf;
-} me_circ_buf_t;
-#   endif //_CBUFF_32b_t
-
-/** How many values is in buffer */
-static inline int me_circ_buf_values(me_circ_buf_t * buf)
-{
-	return ((buf->head - buf->tail) & (buf->mask));
-}
-
-/** How many space left */
-static inline int me_circ_buf_space(me_circ_buf_t * buf)
-{
-	return ((buf->tail - (buf->head + 1)) & (buf->mask));
-}
-
-/** How many values can be read from buffor in one chunck. */
-static inline int me_circ_buf_values_to_end(me_circ_buf_t * buf)
-{
-	return (buf->tail <=
-		buf->head) ? (buf->head - buf->tail) : (buf->mask - buf->tail +
-							1);
-}
-
-/** How many values can be write to buffer in one chunck. */
-static inline int me_circ_buf_space_to_end(me_circ_buf_t * buf)
-{
-	return (buf->tail <=
-		buf->head) ? (buf->mask - buf->head + 1) : (buf->tail -
-							    buf->head - 1);
-}
-
-#  endif //BOSCH
-# endif	//__KERNEL__
-#endif //_MECIRC_BUF_H_
diff --git a/drivers/staging/meilhaus/mecommon.h b/drivers/staging/meilhaus/mecommon.h
deleted file mode 100644
index ef47c38..0000000
--- a/drivers/staging/meilhaus/mecommon.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File	:mecommon.h
- * Author	:GG (Guenter Gebhardt)	<g.gebhardt@xxxxxxxxxxx>
- * Author	:KG (Krzysztof Gantzke)	<k.gantzke@xxxxxxxxxxx>
- */
-
-#ifndef _MECOMMON_H_
-#define _MECOMMON_H_
-
-/*==================================================================
-  The version of this release
-  ================================================================*/
-
-#ifndef ME_VERSION_DRIVER
-/* Unknown version */
-# define ME_VERSION_DRIVER	0xFFFFFFFF
-#endif
-
-#ifndef LIBMEDRIVER_VERSION
-/* Unknown version */
-# define LIBMEDRIVER_VERSION	0xFFFFFFFF
-#endif
-
-#endif
diff --git a/drivers/staging/meilhaus/medebug.h b/drivers/staging/meilhaus/medebug.h
deleted file mode 100644
index dcfb97c..0000000
--- a/drivers/staging/meilhaus/medebug.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/**
- * @file medebug.h
- *
- * @brief Debugging defines.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-#ifndef _MEDEBUG_H_
-#define _MEDEBUG_H_
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-
-//Messages control.
-
-#ifdef MEDEBUG_TEST_ALL		/* Switch to enable all info messages. */
-# ifndef MEDEBUG_TEST
-#  define MEDEBUG_TEST
-# endif
-# ifndef MEDEBUG_TEST_INFO
-#  define MEDEBUG_TEST_INFO
-# endif
-# ifndef MEDEBUG_DEBUG_REG
-#  define MEDEBUG_DEBUG_REG	/* Switch to enable registry access debuging messages. */
-# endif
-# ifndef MEDEBUG_DEBUG_LOCKS
-#  define MEDEBUG_DEBUG_LOCKS	/* Switch to enable locking messages. */
-# endif
-#endif
-
-#ifdef MEDEBUG_TEST_INFO	/* Switch to enable info  and test messages. */
-# ifndef MEDEBUG_INFO
-#  define MEDEBUG_INFO		/* Switch to enable info messages. */
-# endif
-# ifndef MEDEBUG_TEST
-#  define MEDEBUG_TEST
-# endif
-#endif
-
-#ifdef MEDEBUG_TEST		/* Switch to enable debug test messages. */
-# ifndef MEDEBUG_DEBUG
-#  define MEDEBUG_DEBUG		/* Switch to enable debug messages. */
-# endif
-# ifndef MEDEBUG_ERROR
-#  define MEDEBUG_ERROR		/* Switch to enable error messages. */
-# endif
-#endif
-
-#ifdef MEDEBUG_ERROR		/* Switch to enable error messages. */
-# ifndef MEDEBUG_ERROR_CRITICAL	/* Also critical error messages. */
-#  define MEDEBUG_ERROR_CRITICAL	/* Switch to enable high importance error messages. */
-# endif
-#endif
-
-#undef PDEBUG			/* Only to be sure. */
-#undef PINFO			/* Only to be sure. */
-#undef PERROR			/* Only to be sure. */
-#undef PERROR_CRITICAL		/* Only to be sure. */
-#undef PDEBUG_REG		/* Only to be sure. */
-#undef PDEBUG_LOCKS		/* Only to be sure. */
-#undef PSECURITY		/* Only to be sure. */
-#undef PLOG			/* Only to be sure. */
-
-#ifdef MEDEBUG_DEBUG
-# define PDEBUG(fmt, args...) \
-	printk(KERN_DEBUG"ME_DRV D: <%s> " fmt, __func__, ##args)
-#else
-# define PDEBUG(fmt, args...)
-#endif
-
-#ifdef MEDEBUG_DEBUG_LOCKS
-# define PDEBUG_LOCKS(fmt, args...) \
-	printk(KERN_DEBUG"ME_DRV L: <%s> " fmt, __func__, ##args)
-#else
-# define PDEBUG_LOCKS(fmt, args...)
-#endif
-
-#ifdef MEDEBUG_DEBUG_REG
-# define PDEBUG_REG(fmt, args...) \
-	printk(KERN_DEBUG"ME_DRV R: <%s:%d> REG:" fmt, __func__, __LINE__, ##args)
-#else
-# define PDEBUG_REG(fmt, args...)
-#endif
-
-#ifdef MEDEBUG_INFO
-# define PINFO(fmt, args...) \
-	printk(KERN_INFO"ME_DRV I: " fmt, ##args)
-#else
-# define PINFO(fmt, args...)
-#endif
-
-#ifdef MEDEBUG_ERROR
-# define PERROR(fmt, args...) \
-	printk(KERN_ERR"ME_DRV E: <%s:%i> " fmt, __FILE__, __LINE__, ##args)
-#else
-# define PERROR(fmt, args...)
-#endif
-
-#ifdef MEDEBUG_ERROR_CRITICAL
-# define PERROR_CRITICAL(fmt, args...) \
-	printk(KERN_CRIT"ME_DRV C: <%s:%i> " fmt, __FILE__, __LINE__, ##args)
-#else
-# define PERROR_CRITICAL(fmt, args...)
-#endif
-
-//This debug is only to detect logical errors!
-# define PSECURITY(fmt, args...) \
-	printk(KERN_CRIT"ME_DRV SECURITY: <%s:%s:%i> " fmt, __FILE__, __func__, __LINE__, ##args)
-//This debug is to keep track in customers' system
-# define PLOG(fmt, args...) \
-	printk(KERN_INFO"ME_DRV: " fmt, ##args)
-
-//This debug is to check new parts during development
-#ifdef MEDEBUG_DEVELOP
-# define PDEVELOP(fmt, args...) \
-	printk(KERN_CRIT"ME_DRV: <%s:%s:%i> " fmt, __FILE__, __func__, __LINE__, ##args)
-#else
-# define PDEVELOP(fmt, args...)
-#endif
-
-#endif //__KERNEL__
-#endif //_MEDEBUG_H_
diff --git a/drivers/staging/meilhaus/medefines.h b/drivers/staging/meilhaus/medefines.h
deleted file mode 100644
index 6158ef5..0000000
--- a/drivers/staging/meilhaus/medefines.h
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : medefines.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- * Author      : KG (Krzysztof Gantzke)  <k.gantzke@xxxxxxxxxxx>
- */
-
-#ifndef _MEDEFINES_H_
-#define _MEDEFINES_H_
-
-/*==================================================================
-  General
-  ================================================================*/
-
-#define ME_VALUE_NOT_USED							0x0
-#define ME_VALUE_INVALID							~0x0
-
-/*==================================================================
-  Defines common to access functions
-  ================================================================*/
-
-#define ME_LOCK_RELEASE								0x00010001
-#define ME_LOCK_SET									0x00010002
-#define ME_LOCK_CHECK								0x00010003
-
-/*==================================================================
-  Defines meOpen function
-  ================================================================*/
-
-#define ME_OPEN_NO_FLAGS							0x0
-
-/*==================================================================
-  Defines meClose function
-  ================================================================*/
-
-#define ME_CLOSE_NO_FLAGS							0x0
-
-/*==================================================================
-  Defines meLockDriver function
-  ================================================================*/
-
-#define ME_LOCK_DRIVER_NO_FLAGS						0x0
-
-/*==================================================================
-  Defines meLockDevice function
-  ================================================================*/
-
-#define ME_LOCK_DEVICE_NO_FLAGS						0x0
-
-/*==================================================================
-  Defines meLockSubdevice function
-  ================================================================*/
-
-#define ME_LOCK_SUBDEVICE_NO_FLAGS					0x0
-
-
-/*==================================================================
-  Defines common to error functions
-  ================================================================*/
-
-#define ME_ERROR_MSG_MAX_COUNT						256
-
-#define ME_SWITCH_DISABLE							0x00020001
-#define ME_SWITCH_ENABLE							0x00020002
-
-/*==================================================================
-  Defines common to io functions
-  ================================================================*/
-
-#define ME_REF_DIO_FIFO_LOW							0x00030001
-#define ME_REF_DIO_FIFO_HIGH						0x00030002
-
-#define ME_REF_CTR_PREVIOUS							0x00040001
-#define ME_REF_CTR_INTERNAL_1MHZ					0x00040002
-#define ME_REF_CTR_INTERNAL_10MHZ					0x00040003
-#define ME_REF_CTR_EXTERNAL							0x00040004
-
-#define ME_REF_AI_GROUND							0x00050001
-#define ME_REF_AI_DIFFERENTIAL						0x00050002
-
-#define ME_REF_AO_GROUND							0x00060001
-
-#define ME_TRIG_CHAN_DEFAULT						0x00070001
-#define ME_TRIG_CHAN_SYNCHRONOUS					0x00070002
-
-#define ME_TRIG_TYPE_NONE							0x00000000
-#define ME_TRIG_TYPE_SW								0x00080001
-#define ME_TRIG_TYPE_THRESHOLD						0x00080002
-#define ME_TRIG_TYPE_WINDOW							0x00080003
-#define ME_TRIG_TYPE_EDGE							0x00080004
-#define ME_TRIG_TYPE_SLOPE							0x00080005
-#define ME_TRIG_TYPE_EXT_DIGITAL					0x00080006
-#define ME_TRIG_TYPE_EXT_ANALOG						0x00080007
-#define ME_TRIG_TYPE_PATTERN						0x00080008
-#define ME_TRIG_TYPE_TIMER							0x00080009
-#define ME_TRIG_TYPE_COUNT							0x0008000A
-#define ME_TRIG_TYPE_FOLLOW							0x0008000B
-
-#define ME_TRIG_EDGE_NONE							0x00000000
-#define ME_TRIG_EDGE_ABOVE							0x00090001
-#define ME_TRIG_EDGE_BELOW							0x00090002
-#define ME_TRIG_EDGE_ENTRY							0x00090003
-#define ME_TRIG_EDGE_EXIT							0x00090004
-#define ME_TRIG_EDGE_RISING							0x00090005
-#define ME_TRIG_EDGE_FALLING						0x00090006
-#define ME_TRIG_EDGE_ANY							0x00090007
-
-#define ME_TIMER_ACQ_START							0x000A0001
-#define ME_TIMER_SCAN_START							0x000A0002
-#define ME_TIMER_CONV_START							0x000A0003
-
-/*==================================================================
-  Defines for meIOFrequencyToTicks function
-  ================================================================*/
-
-#define ME_IO_FREQUENCY_TO_TICKS_NO_FLAGS			0x0
-
-/*==================================================================
-  Defines for meIOIrqStart function
-  ================================================================*/
-
-#define ME_IRQ_SOURCE_DIO_PATTERN					0x000B0001
-#define ME_IRQ_SOURCE_DIO_MASK						0x000B0002
-#define ME_IRQ_SOURCE_DIO_LINE						0x000B0003
-#define ME_IRQ_SOURCE_DIO_OVER_TEMP					0x000B0004
-
-#define ME_IRQ_EDGE_NOT_USED						0x00000000
-#define ME_IRQ_EDGE_RISING							0x000C0001
-#define ME_IRQ_EDGE_FALLING							0x000C0002
-#define ME_IRQ_EDGE_ANY								0x000C0003
-
-/*==================================================================
-  Defines for meIOIrqStart function
-  ================================================================*/
-
-#define ME_IO_IRQ_START_NO_FLAGS					0x000000
-#define ME_IO_IRQ_START_DIO_BIT						0x000001
-#define ME_IO_IRQ_START_DIO_BYTE					0x000002
-#define ME_IO_IRQ_START_DIO_WORD					0x000004
-#define ME_IO_IRQ_START_DIO_DWORD					0x000008
-#define ME_IO_IRQ_START_PATTERN_FILTERING			0x000010
-#define ME_IO_IRQ_START_EXTENDED_STATUS				0x000020
-
-/*==================================================================
-  Defines for meIOIrqWait function
-  ================================================================*/
-
-#define ME_IO_IRQ_WAIT_NO_FLAGS						0x000000
-#define ME_IO_IRQ_WAIT_NORMAL_STATUS				0x000001
-#define ME_IO_IRQ_WAIT_EXTENDED_STATUS				0x000002
-
-/*==================================================================
-  Defines for meIOIrqStop function
-  ================================================================*/
-
-#define ME_IO_IRQ_STOP_NO_FLAGS						0x000000
-
-/*==================================================================
-  Defines for meIOIrqSetCallback function
-  ================================================================*/
-
-#define ME_IO_IRQ_SET_CALLBACK_NO_FLAGS				0x0
-
-/*==================================================================
-  Defines for meIOResetDevice function
-  ================================================================*/
-
-#define ME_IO_RESET_DEVICE_NO_FLAGS					0x0
-
-/*==================================================================
-  Defines for meIOResetSubdevice function
-  ================================================================*/
-
-#define ME_IO_RESET_SUBDEVICE_NO_FLAGS				0x0
-
-/*==================================================================
-  Defines for meIOSingleConfig function
-  ================================================================*/
-
-#define ME_SINGLE_CONFIG_DIO_INPUT					0x000D0001
-#define ME_SINGLE_CONFIG_DIO_OUTPUT					0x000D0002
-#define ME_SINGLE_CONFIG_DIO_HIGH_IMPEDANCE			0x000D0003
-#define ME_SINGLE_CONFIG_DIO_SINK					0x000D0004
-#define ME_SINGLE_CONFIG_DIO_SOURCE					0x000D0005
-#define ME_SINGLE_CONFIG_DIO_MUX32M					0x000D0006
-#define ME_SINGLE_CONFIG_DIO_DEMUX32				0x000D0007
-#define ME_SINGLE_CONFIG_DIO_BIT_PATTERN			0x000D0008
-
-#define ME_SINGLE_CONFIG_CTR_8254_MODE_0			0x000E0001
-#define ME_SINGLE_CONFIG_CTR_8254_MODE_1			0x000E0002
-#define ME_SINGLE_CONFIG_CTR_8254_MODE_2			0x000E0003
-#define ME_SINGLE_CONFIG_CTR_8254_MODE_3			0x000E0004
-#define ME_SINGLE_CONFIG_CTR_8254_MODE_4			0x000E0005
-#define ME_SINGLE_CONFIG_CTR_8254_MODE_5			0x000E0006
-
-#define ME_IO_SINGLE_CONFIG_NO_FLAGS				0x00
-#define ME_IO_SINGLE_CONFIG_DIO_BIT					0x01
-#define ME_IO_SINGLE_CONFIG_DIO_BYTE				0x02
-#define ME_IO_SINGLE_CONFIG_DIO_WORD				0x04
-#define ME_IO_SINGLE_CONFIG_DIO_DWORD				0x08
-#define ME_IO_SINGLE_CONFIG_MULTISIG_LED_ON			0x10
-#define ME_IO_SINGLE_CONFIG_MULTISIG_LED_OFF		0x20
-#define ME_IO_SINGLE_CONFIG_AI_RMS					0x40
-#define ME_IO_SINGLE_CONFIG_CONTINUE				0x80
-
-/*==================================================================
-  Defines for meIOSingle function
-  ================================================================*/
-
-#define ME_IO_SINGLE_NO_FLAGS						0x0
-#define ME_IO_SINGLE_NONBLOCKING					0x20
-
-#define ME_DIR_INPUT								0x000F0001
-#define ME_DIR_OUTPUT								0x000F0002
-
-#define ME_IO_SINGLE_TYPE_NO_FLAGS					0x00
-#define ME_IO_SINGLE_TYPE_DIO_BIT					0x01
-#define ME_IO_SINGLE_TYPE_DIO_BYTE					0x02
-#define ME_IO_SINGLE_TYPE_DIO_WORD					0x04
-#define ME_IO_SINGLE_TYPE_DIO_DWORD					0x08
-#define ME_IO_SINGLE_TYPE_TRIG_SYNCHRONOUS			0x10
-#define ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING			0x20
-
-/*==================================================================
-  Defines for meIOStreamConfig function
-  ================================================================*/
-
-#define ME_IO_STREAM_CONFIG_NO_FLAGS				0x0
-#define ME_IO_STREAM_CONFIG_BIT_PATTERN				0x1
-#define ME_IO_STREAM_CONFIG_WRAPAROUND				0x2
-#define ME_IO_STREAM_CONFIG_SAMPLE_AND_HOLD			0x4
-#define ME_IO_STREAM_CONFIG_HARDWARE_ONLY			0x8
-
-#define ME_IO_STREAM_CONFIG_TYPE_NO_FLAGS			0x0
-
-#define ME_IO_STREAM_TRIGGER_TYPE_NO_FLAGS			0x0
-
-/*==================================================================
-  Defines for meIOStreamRead function
-  ================================================================*/
-
-#define ME_READ_MODE_BLOCKING						0x00100001
-#define ME_READ_MODE_NONBLOCKING					0x00100002
-
-#define ME_IO_STREAM_READ_NO_FLAGS					0x0
-#define ME_IO_STREAM_READ_FRAMES					0x1
-
-/*==================================================================
-  Defines for meIOStreamWrite function
-  ================================================================*/
-
-#define ME_WRITE_MODE_BLOCKING						0x00110001
-#define ME_WRITE_MODE_NONBLOCKING					0x00110002
-#define ME_WRITE_MODE_PRELOAD						0x00110003
-
-#define ME_IO_STREAM_WRITE_NO_FLAGS					0x00000000
-
-/*==================================================================
-  Defines for meIOStreamStart function
-  ================================================================*/
-
-#define ME_IO_STREAM_START_NO_FLAGS					0x00000000
-
-#define ME_START_MODE_BLOCKING						0x00120001
-#define ME_START_MODE_NONBLOCKING					0x00120002
-
-#define ME_IO_STREAM_START_TYPE_NO_FLAGS			0x0
-#define ME_IO_STREAM_START_TYPE_TRIG_SYNCHRONOUS	0x1
-
-/*==================================================================
-  Defines for meIOStreamStop function
-  ================================================================*/
-
-#define ME_IO_STREAM_STOP_NO_FLAGS					0x00000000
-#define ME_IO_STREAM_STOP_PRESERVE_BUFFERS			0x00000001
-
-#define ME_STOP_MODE_IMMEDIATE						0x00130001
-#define ME_STOP_MODE_LAST_VALUE						0x00130002
-
-#define ME_IO_STREAM_STOP_TYPE_NO_FLAGS				0x00000000
-
-/*==================================================================
-  Defines for meIOStreamStatus function
-  ================================================================*/
-
-#define ME_WAIT_NONE								0x00140001
-#define ME_WAIT_IDLE								0x00140002
-
-#define ME_STATUS_INVALID							0x00000000
-#define ME_STATUS_IDLE								0x00150001
-#define ME_STATUS_BUSY								0x00150002
-#define ME_STATUS_ERROR								0x00150003
-
-#define ME_IO_STREAM_STATUS_NO_FLAGS				0x00000000
-
-/*==================================================================
-  Defines for meIOStreamSetCallbacks function
-  ================================================================*/
-
-#define ME_IO_STREAM_SET_CALLBACKS_NO_FLAGS			0x00000000
-
-/*==================================================================
-  Defines for meIOStreamNewValues function
-  ================================================================*/
-
-#define ME_IO_STREAM_NEW_VALUES_NO_FLAGS			0x00000000
-
-/*==================================================================
-  Defines for meIOTimeToTicks function
-  ================================================================*/
-
-#define ME_IO_STREAM_TIME_TO_TICKS_NO_FLAGS			0x00000000
-
-/*==================================================================
-  Defines for module types
-  ================================================================*/
-
-#define ME_MODULE_TYPE_MULTISIG_NONE				0x00000000
-#define ME_MODULE_TYPE_MULTISIG_DIFF16_10V			0x00160001
-#define ME_MODULE_TYPE_MULTISIG_DIFF16_20V			0x00160002
-#define ME_MODULE_TYPE_MULTISIG_DIFF16_50V			0x00160003
-#define ME_MODULE_TYPE_MULTISIG_CURRENT16_0_20MA	0x00160004
-#define ME_MODULE_TYPE_MULTISIG_RTD8_PT100			0x00160005
-#define ME_MODULE_TYPE_MULTISIG_RTD8_PT500			0x00160006
-#define ME_MODULE_TYPE_MULTISIG_RTD8_PT1000			0x00160007
-#define ME_MODULE_TYPE_MULTISIG_TE8_TYPE_B			0x00160008
-#define ME_MODULE_TYPE_MULTISIG_TE8_TYPE_E			0x00160009
-#define ME_MODULE_TYPE_MULTISIG_TE8_TYPE_J			0x0016000A
-#define ME_MODULE_TYPE_MULTISIG_TE8_TYPE_K			0x0016000B
-#define ME_MODULE_TYPE_MULTISIG_TE8_TYPE_N			0x0016000C
-#define ME_MODULE_TYPE_MULTISIG_TE8_TYPE_R			0x0016000D
-#define ME_MODULE_TYPE_MULTISIG_TE8_TYPE_S			0x0016000E
-#define ME_MODULE_TYPE_MULTISIG_TE8_TYPE_T			0x0016000F
-#define ME_MODULE_TYPE_MULTISIG_TE8_TEMP_SENSOR		0x00160010
-
-/*==================================================================
-  Defines for meQuerySubdeviceCaps function
-  ================================================================*/
-
-#define ME_CAPS_NONE								0x00000000
-
-#define ME_CAPS_DIO_DIR_BIT							0x00000001
-#define ME_CAPS_DIO_DIR_BYTE						0x00000002
-#define ME_CAPS_DIO_DIR_WORD						0x00000004
-#define ME_CAPS_DIO_DIR_DWORD						0x00000008
-#define ME_CAPS_DIO_SINK_SOURCE						0x00000010
-#define ME_CAPS_DIO_BIT_PATTERN_IRQ					0x00000020
-#define ME_CAPS_DIO_BIT_MASK_IRQ_EDGE_RISING		0x00000040
-#define ME_CAPS_DIO_BIT_MASK_IRQ_EDGE_FALLING		0x00000080
-#define ME_CAPS_DIO_BIT_MASK_IRQ_EDGE_ANY			0x00000100
-#define ME_CAPS_DIO_OVER_TEMP_IRQ					0x00000200
-
-#define ME_CAPS_CTR_CLK_PREVIOUS					0x00000001
-#define ME_CAPS_CTR_CLK_INTERNAL_1MHZ				0x00000002
-#define ME_CAPS_CTR_CLK_INTERNAL_10MHZ				0x00000004
-#define ME_CAPS_CTR_CLK_EXTERNAL					0x00000008
-
-#define ME_CAPS_AI_TRIG_SYNCHRONOUS					0x00000001
-/// @note Backward compatibility for me1600 in old style.
-#define ME_CAPS_AI_TRIG_SIMULTANEOUS				ME_CAPS_AI_TRIG_SYNCHRONOUS
-#define ME_CAPS_AI_FIFO								0x00000002
-#define ME_CAPS_AI_FIFO_THRESHOLD					0x00000004
-
-#define ME_CAPS_AO_TRIG_SYNCHRONOUS					0x00000001
-/// @note Backward compatibility for me1600 in old style.
-#define ME_CAPS_AO_TRIG_SIMULTANEOUS				ME_CAPS_AO_TRIG_SYNCHRONOUS
-#define ME_CAPS_AO_FIFO								0x00000002
-#define ME_CAPS_AO_FIFO_THRESHOLD					0x00000004
-
-#define ME_CAPS_EXT_IRQ_EDGE_RISING					0x00000001
-#define ME_CAPS_EXT_IRQ_EDGE_FALLING				0x00000002
-#define ME_CAPS_EXT_IRQ_EDGE_ANY					0x00000004
-
-/*==================================================================
-  Defines for meQuerySubdeviceCapsArgs function
-  ================================================================*/
-
-#define ME_CAP_AI_FIFO_SIZE							0x001D0000
-#define ME_CAP_AI_BUFFER_SIZE						0x001D0001
-
-#define ME_CAP_AO_FIFO_SIZE							0x001F0000
-#define ME_CAP_AO_BUFFER_SIZE						0x001F0001
-
-#define ME_CAP_CTR_WIDTH							0x00200000
-
-/*==================================================================
-  Defines common to query functions
-  ================================================================*/
-
-#define ME_UNIT_INVALID								0x00000000
-#define ME_UNIT_VOLT								0x00170001
-#define ME_UNIT_AMPERE								0x00170002
-#define ME_UNIT_ANY									0x00170003
-
-#define ME_TYPE_INVALID								0x00000000
-#define ME_TYPE_AO									0x00180001
-#define ME_TYPE_AI									0x00180002
-#define ME_TYPE_DIO									0x00180003
-#define ME_TYPE_DO									0x00180004
-#define ME_TYPE_DI									0x00180005
-#define ME_TYPE_CTR									0x00180006
-#define ME_TYPE_EXT_IRQ								0x00180007
-
-#define ME_SUBTYPE_INVALID							0x00000000
-#define ME_SUBTYPE_SINGLE							0x00190001
-#define ME_SUBTYPE_STREAMING						0x00190002
-#define ME_SUBTYPE_CTR_8254							0x00190003
-#define ME_SUBTYPE_ANY								0x00190004
-
-#define ME_DEVICE_DRIVER_NAME_MAX_COUNT				64
-#define ME_DEVICE_NAME_MAX_COUNT					64
-
-#define ME_DEVICE_DESCRIPTION_MAX_COUNT				256
-
-#define ME_BUS_TYPE_INVALID							0x00000000
-#define ME_BUS_TYPE_PCI								0x001A0001
-#define ME_BUS_TYPE_USB								0x001A0002
-
-#define ME_PLUGGED_INVALID							0x00000000
-#define ME_PLUGGED_IN								0x001B0001
-#define ME_PLUGGED_OUT								0x001B0002
-
-#define ME_EXTENSION_TYPE_INVALID					0x00000000
-#define ME_EXTENSION_TYPE_NONE						0x001C0001
-#define ME_EXTENSION_TYPE_MUX32M					0x001C0002
-#define ME_EXTENSION_TYPE_DEMUX32					0x001C0003
-#define ME_EXTENSION_TYPE_MUX32S					0x001C0004
-
-#define ME_ACCESS_TYPE_INVALID						0x00000000
-#define ME_ACCESS_TYPE_LOCAL						0x001D0001
-#define ME_ACCESS_TYPE_REMOTE						0x001D0002
-
-/// @note Add by KG
-
-/*==================================================================
-  Defines for meUtilityPWM
-  ================================================================*/
-#define ME_PWM_START_CONNECT_INTERNAL				0x00200001
-
-/* Flags for SingleConfig channels configure */
-#define ME_SINGLE_CHANNEL_NOT_CONFIGURED			0x00
-#define ME_SINGLE_CHANNEL_CONFIGURED				0x01
-
-/* Define if configuration should be downloaded to driver */
-#define ME_CONFIG_LOAD_NO_FLAGS						0x0
-#define ME_CONFIG_LOAD_TO_DRIVER					0x1
-
-#endif
diff --git a/drivers/staging/meilhaus/medevice.c b/drivers/staging/meilhaus/medevice.c
deleted file mode 100644
index 75aaec0..0000000
--- a/drivers/staging/meilhaus/medevice.c
+++ /dev/null
@@ -1,1740 +0,0 @@
-/**
- * @file medevice.c
- *
- * @brief Meilhaus device base class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "mecommon.h"
-#include "meinternal.h"
-#include "medefines.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "medevice.h"
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-static int me_device_io_irq_start(struct me_device *device,
-				  struct file *filep,
-				  int subdevice,
-				  int channel,
-				  int irq_source,
-				  int irq_edge, int irq_arg, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_irq_start(s,
-						   filep,
-						   channel,
-						   irq_source,
-						   irq_edge, irq_arg, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_irq_wait(struct me_device *device,
-				 struct file *filep,
-				 int subdevice,
-				 int channel,
-				 int *irq_count,
-				 int *value, int time_out, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_irq_wait(s,
-						  filep,
-						  channel,
-						  irq_count,
-						  value, time_out, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_irq_stop(struct me_device *device,
-				 struct file *filep,
-				 int subdevice, int channel, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_irq_stop(s, filep, channel, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_reset_device(struct me_device *device,
-				     struct file *filep, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-	int i, n;
-
-	PDEBUG("executed.\n");
-
-	/* Get the number of subdevices. */
-	n = me_slist_get_number_subdevices(&device->slist);
-
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-
-	/* Reset every subdevice in list. */
-	for (i = 0; i < n; i++) {
-		s = me_slist_get_subdevice(&device->slist, i);
-		err = s->me_subdevice_io_reset_subdevice(s, filep, flags);
-
-		if (err) {
-			PERROR("Cannot reset subdevice.\n");
-			break;
-		}
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_reset_subdevice(struct me_device *device,
-					struct file *filep,
-					int subdevice, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_reset_subdevice(s, filep, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_single_config(struct me_device *device,
-				      struct file *filep,
-				      int subdevice,
-				      int channel,
-				      int single_config,
-				      int ref,
-				      int trig_chan,
-				      int trig_type, int trig_edge, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_single_config(s,
-						       filep,
-						       channel,
-						       single_config,
-						       ref,
-						       trig_chan,
-						       trig_type,
-						       trig_edge, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_single_read(struct me_device *device,
-				    struct file *filep,
-				    int subdevice,
-				    int channel,
-				    int *value, int time_out, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_single_read(s,
-						     filep,
-						     channel,
-						     value, time_out, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_single_write(struct me_device *device,
-				     struct file *filep,
-				     int subdevice,
-				     int channel,
-				     int value, int time_out, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_single_write(s,
-						      filep,
-						      channel,
-						      value, time_out, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_stream_config(struct me_device *device,
-				      struct file *filep,
-				      int subdevice,
-				      meIOStreamConfig_t *config_list,
-				      int count,
-				      meIOStreamTrigger_t *trigger,
-				      int fifo_irq_threshold, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_stream_config(s,
-						       filep,
-						       config_list,
-						       count,
-						       trigger,
-						       fifo_irq_threshold,
-						       flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_stream_new_values(struct me_device *device,
-					  struct file *filep,
-					  int subdevice,
-					  int time_out, int *count, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_stream_new_values(s,
-							   filep,
-							   time_out,
-							   count, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_stream_read(struct me_device *device,
-				    struct file *filep,
-				    int subdevice,
-				    int read_mode,
-				    int *values, int *count, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_stream_read(s,
-						     filep,
-						     read_mode,
-						     values, count, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_stream_start(struct me_device *device,
-				     struct file *filep,
-				     int subdevice,
-				     int start_mode, int time_out, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_stream_start(s,
-						      filep,
-						      start_mode,
-						      time_out, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_stream_status(struct me_device *device,
-				      struct file *filep,
-				      int subdevice,
-				      int wait,
-				      int *status, int *count, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_stream_status(s,
-						       filep,
-						       wait,
-						       status, count, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_stream_stop(struct me_device *device,
-				    struct file *filep,
-				    int subdevice, int stop_mode, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_stream_stop(s,
-						     filep, stop_mode, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_io_stream_write(struct me_device *device,
-				     struct file *filep,
-				     int subdevice,
-				     int write_mode,
-				     int *values, int *count, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_io_stream_write(s,
-						      filep,
-						      write_mode,
-						      values, count, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_lock_device(struct me_device *device,
-				 struct file *filep, int lock, int flags)
-{
-	PDEBUG("executed.\n");
-
-	return me_dlock_lock(&device->dlock,
-			     filep, lock, flags, &device->slist);
-}
-
-static int me_device_lock_subdevice(struct me_device *device,
-				    struct file *filep,
-				    int subdevice, int lock, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Enter device.
-	err = me_dlock_enter(&device->dlock, filep);
-
-	if (err) {
-		PERROR("Cannot enter device.\n");
-		return err;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_lock_subdevice(s, filep, lock, flags);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	// Exit device.
-	me_dlock_exit(&device->dlock, filep);
-
-	return err;
-}
-
-static int me_device_query_description_device(struct me_device *device,
-					      char **description)
-{
-	PDEBUG("executed.\n");
-	*description = device->device_description;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me_device_query_info_device(struct me_device *device,
-				       int *vendor_id,
-				       int *device_id,
-				       int *serial_no,
-				       int *bus_type,
-				       int *bus_no,
-				       int *dev_no, int *func_no, int *plugged)
-{
-	PDEBUG("executed.\n");
-
-	if (device->bus_type == ME_BUS_TYPE_PCI) {
-		*vendor_id = device->info.pci.vendor_id;
-		*device_id = device->info.pci.device_id;
-		*serial_no = device->info.pci.serial_no;
-		*bus_type = ME_BUS_TYPE_PCI;
-		*bus_no = device->info.pci.pci_bus_no;
-		*dev_no = device->info.pci.pci_dev_no;
-		*func_no = device->info.pci.pci_func_no;
-		*plugged = ME_PLUGGED_IN;
-	} else {
-		*plugged = ME_PLUGGED_OUT;
-	}
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me_device_query_name_device(struct me_device *device, char **name)
-{
-	PDEBUG("executed.\n");
-	*name = device->device_name;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me_device_query_name_device_driver(struct me_device *device,
-					      char **name)
-{
-	PDEBUG("executed.\n");
-	*name = device->driver_name;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me_device_query_number_subdevices(struct me_device *device,
-					     int *number)
-{
-	PDEBUG("executed.\n");
-	return me_slist_query_number_subdevices(&device->slist, number);
-}
-
-static int me_device_query_number_channels(struct me_device *device,
-					   int subdevice, int *number)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_query_number_channels(s, number);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	return err;
-}
-
-static int me_device_query_number_ranges(struct me_device *device,
-					 int subdevice, int unit, int *count)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_query_number_ranges(s, unit, count);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	return err;
-}
-
-static int me_device_query_range_by_min_max(struct me_device *device,
-					    int subdevice,
-					    int unit,
-					    int *min,
-					    int *max, int *maxdata, int *range)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_query_range_by_min_max(s,
-							     unit,
-							     min,
-							     max,
-							     maxdata, range);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	return err;
-}
-
-static int me_device_query_range_info(struct me_device *device,
-				      int subdevice,
-				      int range,
-				      int *unit,
-				      int *min, int *max, int *maxdata)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_query_range_info(s,
-						       range,
-						       unit, min, max, maxdata);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	return err;
-}
-
-static int me_device_query_subdevice_by_type(struct me_device *device,
-					     int start_subdevice,
-					     int type,
-					     int subtype, int *subdevice)
-{
-	PDEBUG("executed.\n");
-
-	return me_slist_get_subdevice_by_type(&device->slist,
-					      start_subdevice,
-					      type, subtype, subdevice);
-}
-
-static int me_device_query_subdevice_type(struct me_device *device,
-					  int subdevice,
-					  int *type, int *subtype)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_query_subdevice_type(s, type, subtype);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	return err;
-}
-
-static int me_device_query_subdevice_caps(struct me_device *device,
-					  int subdevice, int *caps)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_query_subdevice_caps(s, caps);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	return err;
-}
-
-static int me_device_query_subdevice_caps_args(struct me_device *device,
-					       int subdevice,
-					       int cap, int *args, int count)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_query_subdevice_caps_args(s,
-								cap,
-								args, count);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	return err;
-}
-
-static int me_device_query_timer(struct me_device *device,
-				 int subdevice,
-				 int timer,
-				 int *base_frequency,
-				 uint64_t *min_ticks, uint64_t *max_ticks)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_subdevice_t *s;
-
-	PDEBUG("executed.\n");
-
-	// Check subdevice index.
-
-	if (subdevice >= me_slist_get_number_subdevices(&device->slist)) {
-		PERROR("Invalid subdevice.\n");
-		return ME_ERRNO_INVALID_SUBDEVICE;
-	}
-	// Get subdevice instance.
-	s = me_slist_get_subdevice(&device->slist, subdevice);
-
-	if (s) {
-		// Call subdevice method.
-		err = s->me_subdevice_query_timer(s,
-						  timer,
-						  base_frequency,
-						  min_ticks, max_ticks);
-	} else {
-		// Something really bad happened.
-		PERROR("Cannot get subdevice instance.\n");
-		err = ME_ERRNO_INTERNAL;
-	}
-
-	return err;
-}
-
-static int me_device_query_version_device_driver(struct me_device *device,
-						 int *version)
-/** @todo Versions shold be read from driver. I must overwrite this function in each module. Here should be returned an error!
-*/
-{
-	PDEBUG("executed.\n");
-	*version = ME_VERSION_DRIVER;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me_device_config_load(struct me_device *device, struct file *filep,
-				 me_cfg_device_entry_t *config)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_SUCCESS;	//If no need for config return success.
-//      return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static void me_device_destructor(me_device_t *me_device)
-{
-	PDEBUG("executed.\n");
-	me_device_deinit(me_device);
-	kfree(me_device);
-}
-
-/* //me_device_usb_init
-int me_device_usb_init(me_device_t *me_device, struct usb_interface *interface)
-{
-	PDEBUG("executed.\n");
-	return -1;
-}
-*/
-
-static int get_device_descriptions(uint16_t device_id,
-				   char **device_name,
-				   char **device_description,
-				   char **driver_name)
-/** @todo This is wrong concept! Static table has too strong limitations!
-* 'device_name' and 'driver_name' should be calculated from 'device_id'
-* 'device_description' should be read from device or moved to user space and handled by library!
-*/
-{
-	PDEBUG("executed.\n");
-
-	switch (device_id) {
-	case PCI_DEVICE_ID_MEILHAUS_ME1000:
-	case PCI_DEVICE_ID_MEILHAUS_ME1000_A:
-	case PCI_DEVICE_ID_MEILHAUS_ME1000_B:
-		*device_name = ME1000_NAME_DEVICE_ME1000;
-		*device_description = ME1000_DESCRIPTION_DEVICE_ME1000;
-		*driver_name = ME1000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1400:
-		*device_name = ME1400_NAME_DEVICE_ME1400;
-		*device_description = ME1400_DESCRIPTION_DEVICE_ME1400;
-		*driver_name = ME1400_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140A:
-		*device_name = ME1400_NAME_DEVICE_ME1400A;
-		*device_description = ME1400_DESCRIPTION_DEVICE_ME1400A;
-		*driver_name = ME1400_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140B:
-		*device_name = ME1400_NAME_DEVICE_ME1400B;
-		*device_description = ME1400_DESCRIPTION_DEVICE_ME1400B;
-		*driver_name = ME1400_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14E0:
-		*device_name = ME1400_NAME_DEVICE_ME1400E;
-		*device_description = ME1400_DESCRIPTION_DEVICE_ME1400E;
-		*driver_name = ME1400_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14EA:
-		*device_name = ME1400_NAME_DEVICE_ME1400EA;
-		*device_description = ME1400_DESCRIPTION_DEVICE_ME1400EA;
-		*driver_name = ME1400_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14EB:
-		*device_name = ME1400_NAME_DEVICE_ME1400EB;
-		*device_description = ME1400_DESCRIPTION_DEVICE_ME1400EB;
-		*driver_name = ME1400_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-		*device_name = ME1400_NAME_DEVICE_ME1400C;
-		*device_description = ME1400_DESCRIPTION_DEVICE_ME1400C;
-		*driver_name = ME1400_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		*device_name = ME1400_NAME_DEVICE_ME1400D;
-		*device_description = ME1400_DESCRIPTION_DEVICE_ME1400D;
-		*driver_name = ME1400_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_4U:
-		*device_name = ME1600_NAME_DEVICE_ME16004U;
-		*device_description = ME1600_DESCRIPTION_DEVICE_ME16004U;
-		*driver_name = ME1600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_8U:
-		*device_name = ME1600_NAME_DEVICE_ME16008U;
-		*device_description = ME1600_DESCRIPTION_DEVICE_ME16008U;
-		*driver_name = ME1600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_12U:
-		*device_name = ME1600_NAME_DEVICE_ME160012U;
-		*device_description = ME1600_DESCRIPTION_DEVICE_ME160012U;
-		*driver_name = ME1600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_16U:
-		*device_name = ME1600_NAME_DEVICE_ME160016U;
-		*device_description = ME1600_DESCRIPTION_DEVICE_ME160016U;
-		*driver_name = ME1600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_16U_8I:
-		*device_name = ME1600_NAME_DEVICE_ME160016U8I;
-		*device_description = ME1600_DESCRIPTION_DEVICE_ME160016U8I;
-		*driver_name = ME1600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4610:
-		*device_name = ME4600_NAME_DEVICE_ME4610;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4610;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4650:
-		*device_name = ME4600_NAME_DEVICE_ME4650;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4650;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660:
-		*device_name = ME4600_NAME_DEVICE_ME4660;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4660;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660I:
-		*device_name = ME4600_NAME_DEVICE_ME4660I;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4660I;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660S:
-		*device_name = ME4600_NAME_DEVICE_ME4660S;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4660S;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660IS:
-		*device_name = ME4600_NAME_DEVICE_ME4660IS;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4660IS;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670:
-		*device_name = ME4600_NAME_DEVICE_ME4670;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4670;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670I:
-		*device_name = ME4600_NAME_DEVICE_ME4670I;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4670I;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670S:
-		*device_name = ME4600_NAME_DEVICE_ME4670S;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4670S;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670IS:
-		*device_name = ME4600_NAME_DEVICE_ME4670IS;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4670IS;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680:
-		*device_name = ME4600_NAME_DEVICE_ME4680;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4680;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680I:
-		*device_name = ME4600_NAME_DEVICE_ME4680I;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4680I;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680S:
-		*device_name = ME4600_NAME_DEVICE_ME4680S;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4680S;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680IS:
-		*device_name = ME4600_NAME_DEVICE_ME4680IS;
-		*device_description = ME4600_DESCRIPTION_DEVICE_ME4680IS;
-		*driver_name = ME4600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6004:
-		*device_name = ME6000_NAME_DEVICE_ME60004;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME60004;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6008:
-		*device_name = ME6000_NAME_DEVICE_ME60008;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME60008;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME600F:
-		*device_name = ME6000_NAME_DEVICE_ME600016;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME600016;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6014:
-		*device_name = ME6000_NAME_DEVICE_ME6000I4;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000I4;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6018:
-		*device_name = ME6000_NAME_DEVICE_ME6000I8;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000I8;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME601F:
-		*device_name = ME6000_NAME_DEVICE_ME6000I16;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000I16;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6034:
-		*device_name = ME6000_NAME_DEVICE_ME6000ISLE4;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE4;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6038:
-		*device_name = ME6000_NAME_DEVICE_ME6000ISLE8;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE8;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME603F:
-		*device_name = ME6000_NAME_DEVICE_ME6000ISLE16;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE16;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6104:
-		*device_name = ME6000_NAME_DEVICE_ME61004;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME61004;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6108:
-		*device_name = ME6000_NAME_DEVICE_ME61008;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME61008;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME610F:
-		*device_name = ME6000_NAME_DEVICE_ME610016;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME610016;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6114:
-		*device_name = ME6000_NAME_DEVICE_ME6100I4;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100I4;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6118:
-		*device_name = ME6000_NAME_DEVICE_ME6100I8;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100I8;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME611F:
-		*device_name = ME6000_NAME_DEVICE_ME6100I16;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100I16;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6134:
-		*device_name = ME6000_NAME_DEVICE_ME6100ISLE4;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE4;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6138:
-		*device_name = ME6000_NAME_DEVICE_ME6100ISLE8;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE8;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME613F:
-		*device_name = ME6000_NAME_DEVICE_ME6100ISLE16;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE16;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6044:
-		*device_name = ME6000_NAME_DEVICE_ME60004DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME60004DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6048:
-		*device_name = ME6000_NAME_DEVICE_ME60008DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME60008DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME604F:
-		*device_name = ME6000_NAME_DEVICE_ME600016DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME600016DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6054:
-		*device_name = ME6000_NAME_DEVICE_ME6000I4DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000I4DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6058:
-		*device_name = ME6000_NAME_DEVICE_ME6000I8DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000I8DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME605F:
-		*device_name = ME6000_NAME_DEVICE_ME6000I16DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000I16DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6074:
-		*device_name = ME6000_NAME_DEVICE_ME6000ISLE4DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE4DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6078:
-		*device_name = ME6000_NAME_DEVICE_ME6000ISLE8DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE8DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME607F:
-		*device_name = ME6000_NAME_DEVICE_ME6000ISLE16DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE16DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6144:
-		*device_name = ME6000_NAME_DEVICE_ME61004DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME61004DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6148:
-		*device_name = ME6000_NAME_DEVICE_ME61008DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME61008DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME614F:
-		*device_name = ME6000_NAME_DEVICE_ME610016DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME610016DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6154:
-		*device_name = ME6000_NAME_DEVICE_ME6100I4DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100I4DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6158:
-		*device_name = ME6000_NAME_DEVICE_ME6100I8DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100I8DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME615F:
-		*device_name = ME6000_NAME_DEVICE_ME6100I16DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100I16DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6174:
-		*device_name = ME6000_NAME_DEVICE_ME6100ISLE4DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE4DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6178:
-		*device_name = ME6000_NAME_DEVICE_ME6100ISLE8DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE8DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME617F:
-		*device_name = ME6000_NAME_DEVICE_ME6100ISLE16DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE16DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6259:
-		*device_name = ME6000_NAME_DEVICE_ME6200I9DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6200I9DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6359:
-		*device_name = ME6000_NAME_DEVICE_ME6300I9DIO;
-		*device_description = ME6000_DESCRIPTION_DEVICE_ME6300I9DIO;
-		*driver_name = ME6000_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0630:
-		*device_name = ME0600_NAME_DEVICE_ME0630;
-		*device_description = ME0600_DESCRIPTION_DEVICE_ME0630;
-		*driver_name = ME0600_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_A:
-		*device_name = ME8100_NAME_DEVICE_ME8100A;
-		*device_description = ME8100_DESCRIPTION_DEVICE_ME8100A;
-		*driver_name = ME8100_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_B:
-		*device_name = ME8100_NAME_DEVICE_ME8100B;
-		*device_description = ME8100_DESCRIPTION_DEVICE_ME8100B;
-		*driver_name = ME8100_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8200_A:
-		*device_name = ME8200_NAME_DEVICE_ME8200A;
-		*device_description = ME8200_DESCRIPTION_DEVICE_ME8200A;
-		*driver_name = ME8200_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8200_B:
-		*device_name = ME8200_NAME_DEVICE_ME8200B;
-		*device_description = ME8200_DESCRIPTION_DEVICE_ME8200B;
-		*driver_name = ME8200_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0940:
-		*device_name = ME0900_NAME_DEVICE_ME0940;
-		*device_description = ME0900_DESCRIPTION_DEVICE_ME0940;
-		*driver_name = ME0900_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0950:
-		*device_name = ME0900_NAME_DEVICE_ME0950;
-		*device_description = ME0900_DESCRIPTION_DEVICE_ME0950;
-		*driver_name = ME0900_NAME_DRIVER;
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0960:
-		*device_name = ME0900_NAME_DEVICE_ME0960;
-		*device_description = ME0900_DESCRIPTION_DEVICE_ME0960;
-		*driver_name = ME0900_NAME_DRIVER;
-		break;
-/*
-		case USB_DEVICE_ID_MEPHISTO_S1:
-			*device_name = MEPHISTO_S1_NAME_DEVICE;
-			*device_description = MEPHISTO_S1_DESCRIPTION_DEVICE;
-			*driver_name = MEPHISTO_S1_NAME_DRIVER;
-			break;
-*/
-	default:
-		*device_name = EMPTY_NAME_DEVICE;
-		*device_description = EMPTY_DESCRIPTION_DEVICE;
-		*driver_name = EMPTY_NAME_DRIVER;
-
-		PERROR("Invalid device id.\n");
-
-		return 1;
-	}
-
-	return 0;
-}
-
-int me_device_pci_init(me_device_t *me_device, struct pci_dev *pci_device)
-{
-	int err;
-	int i;
-
-	PDEBUG("executed.\n");
-
-	// Initialize device list head.
-	INIT_LIST_HEAD(&me_device->list);
-
-	// Initialize device description strings.
-	err = get_device_descriptions(pci_device->device,
-				      &me_device->device_name,
-				      &me_device->device_description,
-				      &me_device->driver_name);
-
-	if (err) {
-		PERROR("Cannot initialize device description strings.\n");
-		return 1;
-	}
-	// Enable the pci device.
-	err = pci_enable_device(pci_device);
-
-	if (err < 0) {
-		PERROR("Cannot enable PCI device.\n");
-		return 1;
-	}
-	// Request the PCI register regions.
-	err = pci_request_regions(pci_device, me_device->device_name);
-
-	if (err < 0) {
-		PERROR("Cannot request PCI regions.\n");
-		goto ERROR_0;
-	}
-	// The bus carrying the device is a PCI bus.
-	me_device->bus_type = ME_BUS_TYPE_PCI;
-
-	// Store the PCI information for later usage.
-	me_device->info.pci.pci_device = pci_device;
-
-	// Get PCI register bases and sizes.
-	for (i = 0; i < 6; i++) {
-		me_device->info.pci.reg_bases[i] =
-		    pci_resource_start(pci_device, i);
-		me_device->info.pci.reg_sizes[i] =
-		    pci_resource_len(pci_device, i);
-	}
-
-	// Get the PCI location.
-	me_device->info.pci.pci_bus_no = pci_device->bus->number;
-	me_device->info.pci.pci_dev_no = PCI_SLOT(pci_device->devfn);
-	me_device->info.pci.pci_func_no = PCI_FUNC(pci_device->devfn);
-
-	// Get Meilhaus specific device information.
-	me_device->info.pci.vendor_id = pci_device->vendor;
-	me_device->info.pci.device_id = pci_device->device;
-	pci_read_config_byte(pci_device, 0x08,
-			     &me_device->info.pci.hw_revision);
-	pci_read_config_dword(pci_device, 0x2C, &me_device->info.pci.serial_no);
-
-	// Get the interrupt request number.
-	me_device->irq = pci_device->irq;
-
-	// Initialize device lock instance.
-	err = me_dlock_init(&me_device->dlock);
-
-	if (err) {
-		PERROR("Cannot initialize device lock instance.\n");
-		goto ERROR_1;
-	}
-	// Initialize subdevice list instance.
-	me_slist_init(&me_device->slist);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice list instance.\n");
-		goto ERROR_2;
-	}
-	// Initialize method pointers.
-	me_device->me_device_io_irq_start = me_device_io_irq_start;
-	me_device->me_device_io_irq_wait = me_device_io_irq_wait;
-	me_device->me_device_io_irq_stop = me_device_io_irq_stop;
-	me_device->me_device_io_reset_device = me_device_io_reset_device;
-	me_device->me_device_io_reset_subdevice = me_device_io_reset_subdevice;
-	me_device->me_device_io_single_config = me_device_io_single_config;
-	me_device->me_device_io_single_read = me_device_io_single_read;
-	me_device->me_device_io_single_write = me_device_io_single_write;
-	me_device->me_device_io_stream_config = me_device_io_stream_config;
-	me_device->me_device_io_stream_new_values =
-	    me_device_io_stream_new_values;
-	me_device->me_device_io_stream_read = me_device_io_stream_read;
-	me_device->me_device_io_stream_start = me_device_io_stream_start;
-	me_device->me_device_io_stream_status = me_device_io_stream_status;
-	me_device->me_device_io_stream_stop = me_device_io_stream_stop;
-	me_device->me_device_io_stream_write = me_device_io_stream_write;
-	me_device->me_device_lock_device = me_device_lock_device;
-	me_device->me_device_lock_subdevice = me_device_lock_subdevice;
-	me_device->me_device_query_description_device =
-	    me_device_query_description_device;
-	me_device->me_device_query_info_device = me_device_query_info_device;
-	me_device->me_device_query_name_device = me_device_query_name_device;
-	me_device->me_device_query_name_device_driver =
-	    me_device_query_name_device_driver;
-	me_device->me_device_query_number_subdevices =
-	    me_device_query_number_subdevices;
-	me_device->me_device_query_number_channels =
-	    me_device_query_number_channels;
-	me_device->me_device_query_number_ranges =
-	    me_device_query_number_ranges;
-	me_device->me_device_query_range_by_min_max =
-	    me_device_query_range_by_min_max;
-	me_device->me_device_query_range_info = me_device_query_range_info;
-	me_device->me_device_query_subdevice_by_type =
-	    me_device_query_subdevice_by_type;
-	me_device->me_device_query_subdevice_type =
-	    me_device_query_subdevice_type;
-	me_device->me_device_query_subdevice_caps =
-	    me_device_query_subdevice_caps;
-	me_device->me_device_query_subdevice_caps_args =
-	    me_device_query_subdevice_caps_args;
-	me_device->me_device_query_timer = me_device_query_timer;
-	me_device->me_device_query_version_device_driver =
-	    me_device_query_version_device_driver;
-	me_device->me_device_config_load = me_device_config_load;
-	me_device->me_device_destructor = me_device_destructor;
-
-	return 0;
-
-      ERROR_0:
-	me_dlock_deinit(&me_device->dlock);
-
-      ERROR_1:
-	pci_release_regions(pci_device);
-
-      ERROR_2:
-	pci_disable_device(pci_device);
-
-	return 1;
-}
-
-void me_device_deinit(me_device_t *me_device)
-{
-	PDEBUG("executed.\n");
-
-	me_slist_deinit(&me_device->slist);
-	me_dlock_deinit(&me_device->dlock);
-
-	if (me_device->bus_type == ME_BUS_TYPE_PCI) {
-		pci_release_regions(me_device->info.pci.pci_device);
-		pci_disable_device(me_device->info.pci.pci_device);
-	}
-/*
-	else
-	{
-		// Must be an USB device.
-	}
-*/
-}
diff --git a/drivers/staging/meilhaus/medevice.h b/drivers/staging/meilhaus/medevice.h
deleted file mode 100644
index 25da828..0000000
--- a/drivers/staging/meilhaus/medevice.h
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : medevice.h
- * Author      : GG (Guenter Gebhardt)  <support@xxxxxxxxxxx>
- */
-
-#ifndef _MEDEVICE_H_
-#define _MEDEVICE_H_
-
-#ifndef KBUILD_MODNAME
-#  define KBUILD_MODNAME KBUILD_STR(memain)
-#endif
-
-#include <linux/pci.h>
-//#include <linux/usb.h>
-#include <linux/fs.h>
-#include <linux/spinlock.h>
-
-#include "metypes.h"
-#include "meslist.h"
-#include "medlock.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Defines a pointer type to a PCI constructor function.
- */
-typedef struct me_device *(*me_pci_constructor_t) (struct pci_dev *);
-
-/**
- * @brief Defines a pointer type to a ME-4000 PCI constructor function.
- */
-#ifdef BOSCH
-typedef struct me_device *(*me_bosch_constructor_t) (struct pci_dev *,
-						     int me_bosch_fw);
-#endif
-
-/**
- * @brief Defines a pointer type to a USB constructor function.
- */
-//typedef struct me_device *(*me_usb_constructor_t)(struct usb_interface *);
-
-/**
- * @brief Defines a pointer type to the dummy constructor function.
- */
-typedef struct me_device *(*me_dummy_constructor_t) (unsigned short vendor_id,
-						     unsigned short device_id,
-						     unsigned int serial_no,
-						     int bus_type,
-						     int bus_no,
-						     int dev_no, int func_no);
-
-//extern me_usb_constructor_t mephisto_s1_constructor __attribute__ ((weak));
-
-/**
- * @brief Holds the PCI device information.
- */
-typedef struct me_pci_info {
-	struct pci_dev *pci_device;			/**< Kernel PCI device structure. */
-	uint32_t reg_bases[6];				/**< The base adresses of the PCI bars. */
-	uint32_t reg_sizes[6];				/**< The sizes of the PCI bars. */
-
-	uint32_t pci_bus_no;				/**< PCI bus number. */
-	uint32_t pci_dev_no;				/**< PCI device number. */
-	uint32_t pci_func_no;				/**< PCI function number. */
-
-	uint16_t vendor_id;					/**< Meilhaus PCI vendor id. */
-	uint16_t device_id;					/**< Meilhaus device id. */
-	uint8_t hw_revision;				/**< Hardware revision of the device. */
-	uint32_t serial_no;					/**< Serial number of the device. */
-} me_pci_info_t;
-
-/**
- * @brief Holds the USB device information.
- */
-//typedef struct me_usb_info {
-//} me_usb_info_t;
-
-/**
- * @brief The Meilhaus device base class structure.
- */
-typedef struct me_device {
-	/* Attributes */
-	struct list_head list;				/**< Enables the device to be added to a dynamic list. */
-//      int magic;                                                      /**< The magic number of the structure. */
-
-	int bus_type;						/**< The descriminator for the union. */
-	union {
-		me_pci_info_t pci;				/**< PCI specific device information. */
-//              me_usb_info_t usb;                              /**< USB specific device information. */
-	} info;								/**< Holds the device information. */
-
-	int irq;							/**< The irq assigned to this device. */
-
-	me_dlock_t dlock;					/**< The device locking structure. */
-	me_slist_t slist;					/**< The container holding all subdevices belonging to this device. */
-
-	char *device_name;					/**< The name of the Meilhaus device. */
-	char *device_description;			/**< The description of the Meilhaus device. */
-	char *driver_name;					/**< The name of the device driver module supporting the device family. */
-
-	/* Methods */
-	int (*me_device_io_irq_start) (struct me_device * device,
-				       struct file * filep,
-				       int subdevice,
-				       int channel,
-				       int irq_source,
-				       int irq_edge, int irq_arg, int flags);
-
-	int (*me_device_io_irq_wait) (struct me_device * device,
-				      struct file * filep,
-				      int subdevice,
-				      int channel,
-				      int *irq_count,
-				      int *value, int time_out, int flags);
-
-	int (*me_device_io_irq_stop) (struct me_device * device,
-				      struct file * filep,
-				      int subdevice, int channel, int flags);
-
-	int (*me_device_io_reset_device) (struct me_device * device,
-					  struct file * filep, int flags);
-
-	int (*me_device_io_reset_subdevice) (struct me_device * device,
-					     struct file * filep,
-					     int subdevice, int flags);
-
-	int (*me_device_io_single_config) (struct me_device * device,
-					   struct file * filep,
-					   int subdevice,
-					   int channel,
-					   int single_config,
-					   int ref,
-					   int trig_chan,
-					   int trig_type,
-					   int trig_edge, int flags);
-
-	int (*me_device_io_single_read) (struct me_device * device,
-					 struct file * filep,
-					 int subdevice,
-					 int channel,
-					 int *value, int time_out, int flags);
-
-	int (*me_device_io_single_write) (struct me_device * device,
-					  struct file * filep,
-					  int subdevice,
-					  int channel,
-					  int value, int time_out, int flags);
-
-	int (*me_device_io_stream_config) (struct me_device * device,
-					   struct file * filep,
-					   int subdevice,
-					   meIOStreamConfig_t * config_list,
-					   int count,
-					   meIOStreamTrigger_t * trigger,
-					   int fifo_irq_threshold, int flags);
-
-	int (*me_device_io_stream_new_values) (struct me_device * device,
-					       struct file * filep,
-					       int subdevice,
-					       int time_out,
-					       int *count, int flags);
-
-	int (*me_device_io_stream_read) (struct me_device * device,
-					 struct file * filep,
-					 int subdevice,
-					 int read_mode,
-					 int *values, int *count, int flags);
-
-	int (*me_device_io_stream_start) (struct me_device * device,
-					  struct file * filep,
-					  int subdevice,
-					  int start_mode,
-					  int time_out, int flags);
-
-	int (*me_device_io_stream_status) (struct me_device * device,
-					   struct file * filep,
-					   int subdevice,
-					   int wait,
-					   int *status, int *count, int flags);
-
-	int (*me_device_io_stream_stop) (struct me_device * device,
-					 struct file * filep,
-					 int subdevice,
-					 int stop_mode, int flags);
-
-	int (*me_device_io_stream_write) (struct me_device * device,
-					  struct file * filep,
-					  int subdevice,
-					  int write_mode,
-					  int *values, int *count, int flags);
-
-	int (*me_device_lock_device) (struct me_device * device,
-				      struct file * filep, int lock, int flags);
-
-	int (*me_device_lock_subdevice) (struct me_device * device,
-					 struct file * filep,
-					 int subdevice, int lock, int flags);
-
-	int (*me_device_query_description_device) (struct me_device * device,
-						   char **description);
-
-	int (*me_device_query_info_device) (struct me_device * device,
-					    int *vendor_id,
-					    int *device_id,
-					    int *serial_no,
-					    int *bus_type,
-					    int *bus_no,
-					    int *dev_no,
-					    int *func_no, int *plugged);
-
-	int (*me_device_query_name_device) (struct me_device * device,
-					    char **name);
-
-	int (*me_device_query_name_device_driver) (struct me_device * device,
-						   char **name);
-
-	int (*me_device_query_number_subdevices) (struct me_device * device,
-						  int *number);
-
-	int (*me_device_query_number_channels) (struct me_device * device,
-						int subdevice, int *number);
-
-	int (*me_device_query_number_ranges) (struct me_device * device,
-					      int subdevice,
-					      int unit, int *count);
-
-	int (*me_device_query_range_by_min_max) (struct me_device * device,
-						 int subdevice,
-						 int unit,
-						 int *min,
-						 int *max,
-						 int *maxdata, int *range);
-
-	int (*me_device_query_range_info) (struct me_device * device,
-					   int subdevice,
-					   int range,
-					   int *unit,
-					   int *min, int *max, int *maxdata);
-
-	int (*me_device_query_subdevice_by_type) (struct me_device * device,
-						  int start_subdevice,
-						  int type,
-						  int subtype, int *subdevice);
-
-	int (*me_device_query_subdevice_type) (struct me_device * device,
-					       int subdevice,
-					       int *type, int *subtype);
-
-	int (*me_device_query_subdevice_caps) (struct me_device * device,
-					       int subdevice, int *caps);
-
-	int (*me_device_query_subdevice_caps_args) (struct me_device * device,
-						    int subdevice,
-						    int cap,
-						    int *args, int count);
-
-	int (*me_device_query_timer) (struct me_device * device,
-				      int subdevice,
-				      int timer,
-				      int *base_frequency,
-				      uint64_t * min_ticks,
-				      uint64_t * max_ticks);
-
-	int (*me_device_query_version_device_driver) (struct me_device * device,
-						      int *version);
-
-	int (*me_device_config_load) (struct me_device * device,
-				      struct file * filep,
-				      me_cfg_device_entry_t * config);
-
-	void (*me_device_destructor) (struct me_device * device);
-} me_device_t;
-
-/**
- * @brief Initializes a PCI device base class structure.
- *
- * @param pci_device The PCI device context as handed over by kernel.
- *
- * @return 0 on success.
- */
-int me_device_pci_init(me_device_t * me_device, struct pci_dev *pci_device);
-
-/**
- * @brief Initializes a USB device base class structure.
- *
- * @param usb_interface The USB device interface as handed over by kernel.
- *
- * @return 0 on success.
- */
-//int me_device_usb_init(me_device_t *me_device, struct usb_interface *interface);
-
-/**
-  * @brief Deinitializes a device base class structure and frees any previously
-  * requested resources related with this structure. It also frees any subdevice
-  * instance hold by the subdevice list.
-  *
-  * @param me_device The device class to deinitialize.
-  */
-void me_device_deinit(me_device_t * me_device);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/medlist.c b/drivers/staging/meilhaus/medlist.c
deleted file mode 100644
index b6a4065..0000000
--- a/drivers/staging/meilhaus/medlist.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/**
- * @file me_dlist.c
- *
- * @brief Implements the device list class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "meerror.h"
-#include "medefines.h"
-
-#include "medlist.h"
-#include "medebug.h"
-
-int me_dlist_query_number_devices(struct me_dlist *dlist, int *number)
-{
-	PDEBUG_LOCKS("called.\n");
-	*number = dlist->n;
-	return ME_ERRNO_SUCCESS;
-}
-
-unsigned int me_dlist_get_number_devices(struct me_dlist *dlist)
-{
-	PDEBUG_LOCKS("called.\n");
-	return dlist->n;
-}
-
-me_device_t *me_dlist_get_device(struct me_dlist * dlist, unsigned int index)
-{
-
-	struct list_head *pos;
-	me_device_t *device = NULL;
-	unsigned int i = 0;
-
-	PDEBUG_LOCKS("called.\n");
-
-	if (index >= dlist->n) {
-		PERROR("Index out of range.\n");
-		return NULL;
-	}
-
-	list_for_each(pos, &dlist->head) {
-		if (i == index) {
-			device = list_entry(pos, me_device_t, list);
-			break;
-		}
-
-		++i;
-	}
-
-	return device;
-}
-
-void me_dlist_add_device_tail(struct me_dlist *dlist, me_device_t *device)
-{
-	PDEBUG_LOCKS("called.\n");
-
-	list_add_tail(&device->list, &dlist->head);
-	++dlist->n;
-}
-
-me_device_t *me_dlist_del_device_tail(struct me_dlist *dlist)
-{
-
-	struct list_head *last;
-	me_device_t *device;
-
-	PDEBUG_LOCKS("called.\n");
-
-	if (list_empty(&dlist->head))
-		return NULL;
-
-	last = dlist->head.prev;
-
-	device = list_entry(last, me_device_t, list);
-
-	list_del(last);
-
-	--dlist->n;
-
-	return device;
-}
-
-int me_dlist_init(me_dlist_t *dlist)
-{
-	PDEBUG_LOCKS("called.\n");
-
-	INIT_LIST_HEAD(&dlist->head);
-	dlist->n = 0;
-	return 0;
-}
-
-void me_dlist_deinit(me_dlist_t *dlist)
-{
-
-	struct list_head *s;
-	me_device_t *device;
-
-	PDEBUG_LOCKS("called.\n");
-
-	while (!list_empty(&dlist->head)) {
-		s = dlist->head.next;
-		list_del(s);
-		device = list_entry(s, me_device_t, list);
-		device->me_device_destructor(device);
-	}
-
-	dlist->n = 0;
-}
diff --git a/drivers/staging/meilhaus/medlist.h b/drivers/staging/meilhaus/medlist.h
deleted file mode 100644
index 091c11e..0000000
--- a/drivers/staging/meilhaus/medlist.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/**
- * @file me_dlist.h
- *
- * @brief Provides the device list class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _ME_DLIST_H_
-#define _ME_DLIST_H_
-
-#include <linux/list.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The device list container.
- */
-typedef struct me_dlist {
-	struct list_head head;		/**< The head of the internal list. */
-	unsigned int n;			/**< The number of devices in the list. */
-} me_dlist_t;
-
-/**
- * @brief Queries the number of devices currently inside the list.
- *
- * @param dlist The device list to query.
- * @param[out] number The number of devices.
- *
- * @return ME-iDS error code.
- */
-int me_dlist_query_number_devices(struct me_dlist *dlist, int *number);
-
-/**
- * @brief Returns the number of devices currently inside the list.
- *
- * @param dlist The device list to query.
- *
- * @return The number of devices in the list.
- */
-unsigned int me_dlist_get_number_devices(struct me_dlist *dlist);
-
-/**
- * @brief Get a device by index.
- *
- * @param dlist The device list to query.
- * @param index The index of the device to get in the list.
- *
- * @return The device at index if available.\n
- *         NULL if the index is out of range.
- */
-me_device_t *me_dlist_get_device(struct me_dlist *dlist, unsigned int index);
-
-/**
- * @brief Adds a device to the tail of the list.
- *
- * @param dlist The device list to add a device to.
- * @param device The device to add to the list.
- */
-void me_dlist_add_device_tail(struct me_dlist *dlist, me_device_t * device);
-
-/**
- * @brief Removes a device from the tail of the list.
- *
- * @param dlist The device list.
- *
- * @return Pointer to the removed subdeivce.\n
- *         NULL in cases where the list was empty.
- */
-me_device_t *me_dlist_del_device_tail(struct me_dlist *dlist);
-
-/**
- * @brief Initializes a device list structure.
- *
- * @param lock The device list structure to initialize.
- * @return 0 on success.
- */
-int me_dlist_init(me_dlist_t * dlist);
-
-/**
- * @brief Deinitializes a device list structure and destructs every device in it.
- *
- * @param dlist The device list structure to deinitialize.
- * @return 0 on success.
- */
-void me_dlist_deinit(me_dlist_t * dlist);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/medlock.c b/drivers/staging/meilhaus/medlock.c
deleted file mode 100644
index 8ded397..0000000
--- a/drivers/staging/meilhaus/medlock.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/**
- * @file medlock.c
- *
- * @brief Implements the device lock class.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/spinlock.h>
-
-#include "medefines.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "meslist.h"
-#include "mesubdevice.h"
-#include "medlock.h"
-
-int me_dlock_enter(struct me_dlock *dlock, struct file *filep)
-{
-	PDEBUG_LOCKS("executed.\n");
-
-	spin_lock(&dlock->spin_lock);
-
-	if ((dlock->filep) != NULL && (dlock->filep != filep)) {
-		PERROR("Device is locked by another process.\n");
-		spin_unlock(&dlock->spin_lock);
-		return ME_ERRNO_LOCKED;
-	}
-
-	dlock->count++;
-
-	spin_unlock(&dlock->spin_lock);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-int me_dlock_exit(struct me_dlock *dlock, struct file *filep)
-{
-	PDEBUG_LOCKS("executed.\n");
-
-	spin_lock(&dlock->spin_lock);
-	dlock->count--;
-	spin_unlock(&dlock->spin_lock);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-int me_dlock_lock(struct me_dlock *dlock,
-		  struct file *filep, int lock, int flags, me_slist_t *slist)
-{
-	int err = ME_ERRNO_SUCCESS;
-	int i;
-	me_subdevice_t *subdevice;
-
-	PDEBUG_LOCKS("executed.\n");
-
-	spin_lock(&dlock->spin_lock);
-
-	switch (lock) {
-
-	case ME_LOCK_RELEASE:
-		if ((dlock->filep == filep) || (dlock->filep == NULL)) {
-			dlock->filep = NULL;
-
-			/* Unlock all possibly locked subdevices. */
-
-			for (i = 0; i < me_slist_get_number_subdevices(slist);
-			     i++) {
-				subdevice = me_slist_get_subdevice(slist, i);
-
-				if (subdevice)
-					err =
-					    subdevice->
-					    me_subdevice_lock_subdevice
-					    (subdevice, filep, ME_LOCK_RELEASE,
-					     flags);
-				else
-					err = ME_ERRNO_INTERNAL;
-			}
-		}
-
-		break;
-
-	case ME_LOCK_SET:
-		if (dlock->count) {
-			PERROR("Device is used by another process.\n");
-			err = ME_ERRNO_USED;
-		} else if ((dlock->filep != NULL) && (dlock->filep != filep)) {
-			PERROR("Device is locked by another process.\n");
-			err = ME_ERRNO_LOCKED;
-		} else if (dlock->filep == NULL) {
-			/* Check any subdevice is locked by another process. */
-
-			for (i = 0; i < me_slist_get_number_subdevices(slist);
-			     i++) {
-				subdevice = me_slist_get_subdevice(slist, i);
-
-				if (subdevice) {
-					if ((err =
-					     subdevice->
-					     me_subdevice_lock_subdevice
-					     (subdevice, filep, ME_LOCK_CHECK,
-					      flags))) {
-						PERROR
-						    ("A subdevice is locked by another process.\n");
-						break;
-					}
-				} else {
-					err = ME_ERRNO_INTERNAL;
-				}
-			}
-
-			/* If no subdevices are locked by other processes,
-			   we can take ownership of the device. Otherwise we jump ahead. */
-			if (!err)
-				dlock->filep = filep;
-		}
-
-		break;
-
-	case ME_LOCK_CHECK:
-		if (dlock->count) {
-			err = ME_ERRNO_USED;
-		} else if ((dlock->filep != NULL) && (dlock->filep != filep)) {
-			err = ME_ERRNO_LOCKED;
-		} else if (dlock->filep == NULL) {
-			for (i = 0; i < me_slist_get_number_subdevices(slist);
-			     i++) {
-				subdevice = me_slist_get_subdevice(slist, i);
-
-				if (subdevice) {
-					if ((err =
-					     subdevice->
-					     me_subdevice_lock_subdevice
-					     (subdevice, filep, ME_LOCK_CHECK,
-					      flags))) {
-						PERROR
-						    ("A subdevice is locked by another process.\n");
-						break;
-					}
-				} else {
-					err = ME_ERRNO_INTERNAL;
-				}
-			}
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid lock.\n");
-
-		err = ME_ERRNO_INVALID_LOCK;
-
-		break;
-	}
-
-	spin_unlock(&dlock->spin_lock);
-
-	return err;
-}
-
-void me_dlock_deinit(struct me_dlock *dlock)
-{
-	PDEBUG_LOCKS("executed.\n");
-}
-
-int me_dlock_init(me_dlock_t *dlock)
-{
-	PDEBUG_LOCKS("executed.\n");
-
-	dlock->filep = NULL;
-	dlock->count = 0;
-	spin_lock_init(&dlock->spin_lock);
-
-	return 0;
-}
diff --git a/drivers/staging/meilhaus/medlock.h b/drivers/staging/meilhaus/medlock.h
deleted file mode 100644
index 4d6ddc8..0000000
--- a/drivers/staging/meilhaus/medlock.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/**
- * @file medlock.h
- *
- * @brief Provides the device lock class.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _MEDLOCK_H_
-#define _MEDLOCK_H_
-
-#include <linux/spinlock.h>
-
-#ifdef __KERNEL__
-
-/**
- * @brief The device lock class.
- */
-typedef struct me_dlock {
-	struct file *filep;		/**< Pointer to file structure holding the device. */
-	int count;				/**< Number of tasks which are inside the device. */
-	spinlock_t spin_lock;	/**< Spin lock protecting the attributes from concurrent access. */
-} me_dlock_t;
-
-/**
- * @brief Tries to enter a device.
- *
- * @param dlock The device lock instance.
- * @param filep The file structure identifying the calling process.
- *
- * @return 0 on success.
- */
-int me_dlock_enter(struct me_dlock *dlock, struct file *filep);
-
-/**
- * @brief Exits a device.
- *
- * @param dlock The device lock instance.
- * @param filep The file structure identifying the calling process.
- *
- * @return 0 on success.
- */
-int me_dlock_exit(struct me_dlock *dlock, struct file *filep);
-
-/**
- * @brief Tries to perform a locking action on a device.
- *
- * @param dlock The device lock instance.
- * @param filep The file structure identifying the calling process.
- * @param The action to be done.
- * @param flags Flags from user space.
- * @param slist The subdevice list of the device.
- *
- * @return 0 on success.
- */
-int me_dlock_lock(struct me_dlock *dlock,
-		  struct file *filep, int lock, int flags, me_slist_t * slist);
-
-/**
- * @brief Initializes a lock structure.
- *
- * @param dlock The lock structure to initialize.
- * @return 0 on success.
- */
-int me_dlock_init(me_dlock_t * dlock);
-
-/**
- * @brief Deinitializes a lock structure.
- *
- * @param dlock The lock structure to deinitialize.
- * @return 0 on success.
- */
-void me_dlock_deinit(me_dlock_t * dlock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/medriver.h b/drivers/staging/meilhaus/medriver.h
deleted file mode 100644
index 02e2408..0000000
--- a/drivers/staging/meilhaus/medriver.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : medriver.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- *  Author:	Krzysztof Gantzke	<k.gantzke@xxxxxxxxxxx>
- */
-
-#ifndef _MEDRIVER_H_
-#define _MEDRIVER_H_
-
-#include "metypes.h"
-#include "meerror.h"
-#include "medefines.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-	/*===========================================================================
-	  Functions to access the driver system
-	  =========================================================================*/
-
-	int meOpen(int iFlags);
-	int meClose(int iFlags);
-
-	int meLockDriver(int iLock, int iFlags);
-	int meLockDevice(int iDevice, int iLock, int iFlags);
-	int meLockSubdevice(int iDevice, int iSubdevice, int iLock, int iFlags);
-
-	/*===========================================================================
-	  Error handling functions
-	  =========================================================================*/
-
-	int meErrorGetLastMessage(char *pcErrorMsg, int iCount);
-	int meErrorGetMessage(int iErrorCode, char *pcErrorMsg, int iCount);
-	int meErrorSetDefaultProc(int iSwitch);
-	int meErrorSetUserProc(meErrorCB_t pErrorProc);
-
-
-	/*===========================================================================
-	  Functions to perform I/O on a device
-	  =========================================================================*/
-
-	int meIOIrqSetCallback(
-			int iDevice,
-			int iSubdevice,
-			meIOIrqCB_t pCallback,
-			void *pCallbackContext,
-			int iFlags);
-	int meIOIrqStart(
-			int iDevice,
-			int iSubdevice,
-			int iChannel,
-			int iIrqSource,
-			int iIrqEdge,
-			int iIrqArg,
-			int iFlags);
-	int meIOIrqStop(
-			int iDevice,
-			int iSubdevice,
-			int iChannel,
-			int iFlags);
-	int meIOIrqWait(
-			int iDevice,
-			int iSubdevice,
-			int iChannel,
-			int *piIrqCount,
-			int *piValue,
-			int iTimeOut,
-			int iFlags);
-
-	int meIOResetDevice(int iDevice, int iFlags);
-	int meIOResetSubdevice(int iDevice, int iSubdevice, int iFlags);
-
-	int meIOStreamFrequencyToTicks(
-			int iDevice,
-			int iSubdevice,
-			int iTimer,
-			double *pdFrequency,
-			int *piTicksLow,
-			int *piTicksHigh,
-			int iFlags);
-
-	int meIOSingleConfig(
-			int iDevice,
-			int iSubdevice,
-			int iChannel,
-			int iSingleConfig,
-			int iRef,
-			int iTrigChan,
-			int iTrigType,
-			int iTrigEdge,
-			int iFlags);
-	int meIOSingle(meIOSingle_t *pSingleList, int iCount, int iFlags);
-
-	int meIOStreamConfig(
-			int iDevice,
-			int iSubdevice,
-			meIOStreamConfig_t *pConfigList,
-			int iCount,
-			meIOStreamTrigger_t *pTrigger,
-			int iFifoIrqThreshold,
-			int iFlags);
-	int meIOStreamNewValues(
-			int iDevice,
-			int iSubdevice,
-			int iTimeOut,
-			int *piCount,
-			int iFlags);
-	int meIOStreamRead(
-			int iDevice,
-			int iSubdevice,
-			int iReadMode,
-			int *piValues,
-			int *piCount,
-			int iFlags);
-	int meIOStreamWrite(
-			int iDevice,
-			int iSubdevice,
-			int iWriteMode,
-			int *piValues,
-			int *piCount,
-			int iFlags);
-	int meIOStreamStart(meIOStreamStart_t *pStartList, int iCount, int iFlags);
-	int meIOStreamStop(meIOStreamStop_t *pStopList, int iCount, int iFlags);
-	int meIOStreamStatus(
-			int iDevice,
-			int iSubdevice,
-			int iWait,
-			int *piStatus,
-			int *piCount,
-			int iFlags);
-	int meIOStreamSetCallbacks(
-			int iDevice,
-			int iSubdevice,
-			meIOStreamCB_t pStartCB,
-			void *pStartCBContext,
-			meIOStreamCB_t pNewValuesCB,
-			void *pNewValuesCBContext,
-			meIOStreamCB_t pEndCB,
-			void *pEndCBContext,
-			int iFlags);
-	int meIOStreamTimeToTicks(
-			int iDevice,
-			int iSubdevice,
-			int iTimer,
-			double *pdTime,
-			int *piTicksLow,
-			int *piTicksHigh,
-			int iFlags);
-
-
-	/*===========================================================================
-	  Functions to query the driver system
-	  =========================================================================*/
-
-	int meQueryDescriptionDevice(int iDevice, char *pcDescription, int iCount);
-
-	int meQueryInfoDevice(
-			int iDevice,
-			int *piVendorId,
-			int *piDeviceId,
-			int *piSerialNo,
-			int *piBusType,
-			int *piBusNo,
-			int *piDevNo,
-			int *piFuncNo,
-			int *piPlugged);
-
-	int meQueryNameDevice(int iDevice, char *pcName, int iCount);
-	int meQueryNameDeviceDriver(int iDevice, char *pcName, int iCount);
-
-	int meQueryNumberDevices(int *piNumber);
-	int meQueryNumberSubdevices(int iDevice, int *piNumber);
-	int meQueryNumberChannels(int iDevice, int iSubdevice, int *piNumber);
-	int meQueryNumberRanges(
-			int iDevice,
-			int iSubdevice,
-			int iUnit,
-			int *piNumber);
-
-	int meQueryRangeByMinMax(
-			int iDevice,
-			int iSubdevice,
-			int iUnit,
-			double *pdMin,
-			double *pdMax,
-			int *piMaxData,
-			int *piRange);
-	int meQueryRangeInfo(
-			int iDevice,
-			int iSubdevice,
-			int iRange,
-			int *piUnit,
-			double *pdMin,
-			double *pdMax,
-			int *piMaxData);
-
-	int meQuerySubdeviceByType(
-			int iDevice,
-			int iStartSubdevice,
-			int iType,
-			int iSubtype,
-			int *piSubdevice);
-	int meQuerySubdeviceType(
-			int iDevice,
-			int iSubdevice,
-			int *piType,
-			int *piSubtype);
-	int meQuerySubdeviceCaps(
-			int iDevice,
-			int iSubdevice,
-			int *piCaps);
-	int meQuerySubdeviceCapsArgs(
-			int iDevice,
-			int iSubdevice,
-			int iCap,
-			int *piArgs,
-			int iCount);
-
-	int meQueryVersionLibrary(int *piVersion);
-	int meQueryVersionMainDriver(int *piVersion);
-	int meQueryVersionDeviceDriver(int iDevice, int *piVersion);
-
-
-	/*===========================================================================
-	  Common utility functions
-	  =========================================================================*/
-
-	int meUtilityExtractValues(
-			int iChannel,
-			int *piAIBuffer,
-			int iAIBufferCount,
-			meIOStreamConfig_t *pConfigList,
-			int iConfigListCount,
-			int *piChanBuffer,
-			int *piChanBufferCount);
-	int meUtilityDigitalToPhysical(
-			double dMin,
-			double dMax,
-			int iMaxData,
-			int iData,
-			int iModuleType,
-			double dRefValue,
-			double *pdPhysical);
-	int meUtilityDigitalToPhysicalV(
-			double dMin,
-			double dMax,
-			int iMaxData,
-			int *piDataBuffer,
-			int iCount,
-			int iModuleType,
-			double dRefValue,
-			double *pdPhysicalBuffer);
-	int meUtilityPhysicalToDigital(
-			double dMin,
-			double dMax,
-			int iMaxData,
-			double dPhysical,
-			int *piData);
-	int meUtilityPWMStart(
-			int iDevice,
-			int iSubdevice1,
-			int iSubdevice2,
-			int iSubdevice3,
-			int iRef,
-			int iPrescaler,
-			int iDutyCycle,
-			int iFlag);
-	int meUtilityPWMStop(int iDevice,
-			int iSubdevice1);
-	int meUtilityPWMRestart(
-			int iDevice,
-			int iSubdevice1,
-			int iRef,
-			int iPrescaler);
-
-
-	/*===========================================================================
-	  Load configuration from file into driver system
-	  =========================================================================*/
-
-	int meConfigLoad(char *pcConfigFile);
-
-
-	/*===========================================================================
-	  Functions to query a remote driver system
-	  =========================================================================*/
-
-	int meRQueryDescriptionDevice(
-			char *location,
-			int iDevice,
-			char *pcDescription,
-			int iCount);
-
-	int meRQueryInfoDevice(
-			char *location,
-			int iDevice,
-			int *piVendorId,
-			int *piDeviceId,
-			int *piSerialNo,
-			int *piBusType,
-			int *piBusNo,
-			int *piDevNo,
-			int *piFuncNo,
-			int *piPlugged);
-
-	int meRQueryNameDevice(
-			char *location,
-			int iDevice,
-			char *pcName,
-			int iCount);
-
-	int meRQueryNumberDevices(char *location, int *piNumber);
-	int meRQueryNumberSubdevices(char *location, int iDevice, int *piNumber);
-	int meRQueryNumberChannels(
-			char *location,
-			int iDevice,
-			int iSubdevice,
-			int *piNumber);
-	int meRQueryNumberRanges(
-			char *location,
-			int iDevice,
-			int iSubdevice,
-			int iUnit,
-			int *piNumber);
-
-	int meRQueryRangeInfo(
-			char *location,
-			int iDevice,
-			int iSubdevice,
-			int iRange,
-			int *piUnit,
-			double *pdMin,
-			double *pdMax,
-			int *piMaxData);
-
-	int meRQuerySubdeviceType(
-			char *location,
-			int iDevice,
-			int iSubdevice,
-			int *piType,
-			int *piSubtype);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/drivers/staging/meilhaus/medummy.c b/drivers/staging/meilhaus/medummy.c
deleted file mode 100644
index 2423745..0000000
--- a/drivers/staging/meilhaus/medummy.c
+++ /dev/null
@@ -1,1264 +0,0 @@
-/* Device driver for Meilhaus ME-DUMMY devices.
- * ===========================================
- *
- *    Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- *    This file is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * User application could also include the kernel header files. But the
- * real kernel functions are protected by #ifdef __KERNEL__.
- */
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * This must be defined before module.h is included. Not needed, when
- * it is a built in driver.
- */
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "meerror.h"
-#include "meinternal.h"
-
-#include "meids.h"
-#include "mecommon.h"
-#include "medevice.h"
-#include "medebug.h"
-
-#include "medummy.h"
-
-static int medummy_io_irq_start(me_device_t *device,
-				struct file *filep,
-				int subdevice,
-				int channel,
-				int irq_source,
-				int irq_edge, int irq_arg, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_irq_wait(me_device_t *device,
-			       struct file *filep,
-			       int subdevice,
-			       int channel,
-			       int *irq_count,
-			       int *value, int timeout, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_irq_stop(me_device_t *device,
-			       struct file *filep,
-			       int subdevice, int channel, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_reset_device(me_device_t *device,
-				   struct file *filep, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_reset_subdevice(me_device_t *device,
-				      struct file *filep,
-				      int subdevice, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_single_config(me_device_t *device,
-				    struct file *filep,
-				    int subdevice,
-				    int channel,
-				    int single_config,
-				    int ref,
-				    int trig_chan,
-				    int trig_type, int trig_edge, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_single_read(me_device_t *device,
-				  struct file *filep,
-				  int subdevice,
-				  int channel,
-				  int *value, int time_out, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_single_write(me_device_t *device,
-				   struct file *filep,
-				   int subdevice,
-				   int channel,
-				   int value, int time_out, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_stream_config(me_device_t *device,
-				    struct file *filep,
-				    int subdevice,
-				    meIOStreamConfig_t *config_list,
-				    int count,
-				    meIOStreamTrigger_t *trigger,
-				    int fifo_irq_threshold, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_stream_new_values(me_device_t *device,
-					struct file *filep,
-					int subdevice,
-					int timeout, int *count, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_stream_read(me_device_t *device,
-				  struct file *filep,
-				  int subdevice,
-				  int read_mode,
-				  int *values, int *count, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_stream_start(me_device_t *device,
-				   struct file *filep,
-				   int subdevice,
-				   int start_mode, int time_out, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_stream_status(me_device_t *device,
-				    struct file *filep,
-				    int subdevice,
-				    int wait,
-				    int *status, int *values, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_stream_stop(me_device_t *device,
-				  struct file *filep,
-				  int subdevice, int stop_mode, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_io_stream_write(me_device_t *device,
-				   struct file *filep,
-				   int subdevice,
-				   int write_mode,
-				   int *values, int *count, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_lock_device(me_device_t *device,
-			       struct file *filep, int lock, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_lock_subdevice(me_device_t *device,
-				  struct file *filep,
-				  int subdevice, int lock, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_description_device(me_device_t *device,
-					    char **description)
-{
-	medummy_device_t *instance = (medummy_device_t *) device;
-
-	PDEBUG("executed.\n");
-
-//      if (instance->magic != MEDUMMY_MAGIC_NUMBER)
-//      {
-//              PERROR("Wrong magic number.\n");
-//              return ME_ERRNO_INTERNAL;
-//      }
-
-	switch (instance->device_id) {
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1000:
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1000_A:
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1000_B:
-		*description = ME1000_DESCRIPTION_DEVICE_ME1000;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1400:
-		*description = ME1400_DESCRIPTION_DEVICE_ME1400;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140A:
-		*description = ME1400_DESCRIPTION_DEVICE_ME1400A;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140B:
-		*description = ME1400_DESCRIPTION_DEVICE_ME1400B;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14E0:
-		*description = ME1400_DESCRIPTION_DEVICE_ME1400E;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14EA:
-		*description = ME1400_DESCRIPTION_DEVICE_ME1400EA;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14EB:
-		*description = ME1400_DESCRIPTION_DEVICE_ME1400EB;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-		*description = ME1400_DESCRIPTION_DEVICE_ME1400C;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		*description = ME1400_DESCRIPTION_DEVICE_ME1400D;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_4U:
-		*description = ME1600_DESCRIPTION_DEVICE_ME16004U;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_8U:
-		*description = ME1600_DESCRIPTION_DEVICE_ME16008U;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_12U:
-		*description = ME1600_DESCRIPTION_DEVICE_ME160012U;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_16U:
-		*description = ME1600_DESCRIPTION_DEVICE_ME160016U;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_16U_8I:
-		*description = ME1600_DESCRIPTION_DEVICE_ME160016U8I;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4610:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4610;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4650:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4650;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4660;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660I:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4660I;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660S:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4660S;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660IS:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4660IS;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4670;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670I:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4670I;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670S:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4670S;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670IS:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4670IS;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4680;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680I:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4680I;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680S:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4680S;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680IS:
-		*description = ME4600_DESCRIPTION_DEVICE_ME4680IS;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6004:
-		*description = ME6000_DESCRIPTION_DEVICE_ME60004;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6008:
-		*description = ME6000_DESCRIPTION_DEVICE_ME60008;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME600F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME600016;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6014:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000I4;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6018:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000I8;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME601F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000I16;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6034:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE4;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6038:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE8;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME603F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE16;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6104:
-		*description = ME6000_DESCRIPTION_DEVICE_ME61004;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6108:
-		*description = ME6000_DESCRIPTION_DEVICE_ME61008;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME610F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME610016;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6114:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100I4;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6118:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100I8;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME611F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100I16;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6134:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE4;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6138:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE8;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME613F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE16;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6044:
-		*description = ME6000_DESCRIPTION_DEVICE_ME60004DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6048:
-		*description = ME6000_DESCRIPTION_DEVICE_ME60008DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME604F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME600016DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6054:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000I4DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6058:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000I8DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME605F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000I16DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6074:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE4DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6078:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE8DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME607F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6000ISLE16DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6144:
-		*description = ME6000_DESCRIPTION_DEVICE_ME61004DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6148:
-		*description = ME6000_DESCRIPTION_DEVICE_ME61008DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME614F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME610016DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6154:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100I4DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6158:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100I8DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME615F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100I16DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6174:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE4DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6178:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE8DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME617F:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6100ISLE16DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6259:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6200I9DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6359:
-		*description = ME6000_DESCRIPTION_DEVICE_ME6300I9DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0630:
-		*description = ME0600_DESCRIPTION_DEVICE_ME0630;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_A:
-		*description = ME8100_DESCRIPTION_DEVICE_ME8100A;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_B:
-		*description = ME8100_DESCRIPTION_DEVICE_ME8100B;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0940:
-		*description = ME0900_DESCRIPTION_DEVICE_ME0940;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0950:
-		*description = ME0900_DESCRIPTION_DEVICE_ME0950;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0960:
-		*description = ME0900_DESCRIPTION_DEVICE_ME0960;
-
-		break;
-/*
-		case USB_DEVICE_ID_MEPHISTO_S1:
-			*description = MEPHISTO_S1_DESCRIPTION_DEVICE;
-
-			break;
-*/
-	default:
-		*description = EMPTY_DESCRIPTION_DEVICE;
-		PERROR("Invalid device id in device info.\n");
-
-		return ME_ERRNO_INTERNAL;
-	}
-
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_info_device(me_device_t *device,
-				     int *vendor_id,
-				     int *device_id,
-				     int *serial_no,
-				     int *bus_type,
-				     int *bus_no,
-				     int *dev_no, int *func_no, int *plugged)
-{
-	medummy_device_t *instance = (medummy_device_t *) device;
-
-	PDEBUG("executed.\n");
-
-//      if (instance->magic != MEDUMMY_MAGIC_NUMBER)
-//      {
-//              PERROR("Wrong magic number.\n");
-//              return ME_ERRNO_INTERNAL;
-//      }
-
-	*vendor_id = instance->vendor_id;
-	*device_id = instance->device_id;
-	*serial_no = instance->serial_no;
-	*bus_type = instance->bus_type;
-	*bus_no = instance->bus_no;
-	*dev_no = instance->dev_no;
-	*func_no = instance->func_no;
-	*plugged = ME_PLUGGED_OUT;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int medummy_query_name_device_driver(me_device_t *device, char **name)
-{
-	PDEBUG("executed.\n");
-	*name = MEDUMMY_NAME_DRIVER;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int medummy_query_name_device(me_device_t *device, char **name)
-{
-	medummy_device_t *instance = (medummy_device_t *) device;
-
-	PDEBUG("executed.\n");
-
-// // //        if (instance->magic != MEDUMMY_MAGIC_NUMBER)
-// // //        {
-// // //                PERROR("Wrong magic number.\n");
-// // //                return ME_ERRNO_INTERNAL;
-// // //        }
-
-	switch (instance->device_id) {
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1000:
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1000_A:
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1000_B:
-		*name = ME1000_NAME_DEVICE_ME1000;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1400:
-		*name = ME1400_NAME_DEVICE_ME1400;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140A:
-		*name = ME1400_NAME_DEVICE_ME1400A;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140B:
-		*name = ME1400_NAME_DEVICE_ME1400B;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14E0:
-		*name = ME1400_NAME_DEVICE_ME1400E;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14EA:
-		*name = ME1400_NAME_DEVICE_ME1400EA;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME14EB:
-		*name = ME1400_NAME_DEVICE_ME1400EB;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140C:
-		*name = ME1400_NAME_DEVICE_ME1400C;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME140D:
-		*name = ME1400_NAME_DEVICE_ME1400D;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_4U:
-		*name = ME1600_NAME_DEVICE_ME16004U;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_8U:
-		*name = ME1600_NAME_DEVICE_ME16008U;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_12U:
-		*name = ME1600_NAME_DEVICE_ME160012U;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_16U:
-		*name = ME1600_NAME_DEVICE_ME160016U;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME1600_16U_8I:
-		*name = ME1600_NAME_DEVICE_ME160016U8I;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4610:
-		*name = ME4600_NAME_DEVICE_ME4610;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4650:
-		*name = ME4600_NAME_DEVICE_ME4650;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660:
-		*name = ME4600_NAME_DEVICE_ME4660;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4660I:
-		*name = ME4600_NAME_DEVICE_ME4660I;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670:
-		*name = ME4600_NAME_DEVICE_ME4670;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670I:
-		*name = ME4600_NAME_DEVICE_ME4670I;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670S:
-		*name = ME4600_NAME_DEVICE_ME4670S;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4670IS:
-		*name = ME4600_NAME_DEVICE_ME4670IS;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680:
-		*name = ME4600_NAME_DEVICE_ME4680;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680I:
-		*name = ME4600_NAME_DEVICE_ME4680I;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680S:
-		*name = ME4600_NAME_DEVICE_ME4680S;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME4680IS:
-		*name = ME4600_NAME_DEVICE_ME4680IS;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6004:
-		*name = ME6000_NAME_DEVICE_ME60004;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6008:
-		*name = ME6000_NAME_DEVICE_ME60008;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME600F:
-		*name = ME6000_NAME_DEVICE_ME600016;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6014:
-		*name = ME6000_NAME_DEVICE_ME6000I4;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6018:
-		*name = ME6000_NAME_DEVICE_ME6000I8;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME601F:
-		*name = ME6000_NAME_DEVICE_ME6000I16;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6034:
-		*name = ME6000_NAME_DEVICE_ME6000ISLE4;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6038:
-		*name = ME6000_NAME_DEVICE_ME6000ISLE8;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME603F:
-		*name = ME6000_NAME_DEVICE_ME6000ISLE16;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6104:
-		*name = ME6000_NAME_DEVICE_ME61004;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6108:
-		*name = ME6000_NAME_DEVICE_ME61008;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME610F:
-		*name = ME6000_NAME_DEVICE_ME610016;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6114:
-		*name = ME6000_NAME_DEVICE_ME6100I4;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6118:
-		*name = ME6000_NAME_DEVICE_ME6100I8;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME611F:
-		*name = ME6000_NAME_DEVICE_ME6100I16;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6134:
-		*name = ME6000_NAME_DEVICE_ME6100ISLE4;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6138:
-		*name = ME6000_NAME_DEVICE_ME6100ISLE8;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME613F:
-		*name = ME6000_NAME_DEVICE_ME6100ISLE16;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6044:
-		*name = ME6000_NAME_DEVICE_ME60004DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6048:
-		*name = ME6000_NAME_DEVICE_ME60008DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME604F:
-		*name = ME6000_NAME_DEVICE_ME600016DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6054:
-		*name = ME6000_NAME_DEVICE_ME6000I4DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6058:
-		*name = ME6000_NAME_DEVICE_ME6000I8DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME605F:
-		*name = ME6000_NAME_DEVICE_ME6000I16DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6074:
-		*name = ME6000_NAME_DEVICE_ME6000ISLE4DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6078:
-		*name = ME6000_NAME_DEVICE_ME6000ISLE8DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME607F:
-		*name = ME6000_NAME_DEVICE_ME6000ISLE16DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6144:
-		*name = ME6000_NAME_DEVICE_ME61004DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6148:
-		*name = ME6000_NAME_DEVICE_ME61008DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME614F:
-		*name = ME6000_NAME_DEVICE_ME610016DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6154:
-		*name = ME6000_NAME_DEVICE_ME6100I4DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6158:
-		*name = ME6000_NAME_DEVICE_ME6100I8DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME615F:
-		*name = ME6000_NAME_DEVICE_ME6100I16DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6174:
-		*name = ME6000_NAME_DEVICE_ME6100ISLE4DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME6178:
-		*name = ME6000_NAME_DEVICE_ME6100ISLE8DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME617F:
-		*name = ME6000_NAME_DEVICE_ME6100ISLE16DIO;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0630:
-		*name = ME0600_NAME_DEVICE_ME0630;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_A:
-		*name = ME8100_NAME_DEVICE_ME8100A;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME8100_B:
-		*name = ME8100_NAME_DEVICE_ME8100B;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0940:
-		*name = ME0900_NAME_DEVICE_ME0940;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0950:
-		*name = ME0900_NAME_DEVICE_ME0950;
-
-		break;
-
-	case PCI_DEVICE_ID_MEILHAUS_ME0960:
-		*name = ME0900_NAME_DEVICE_ME0960;
-
-		break;
-/*
-		case USB_DEVICE_ID_MEPHISTO_S1:
-			*name = MEPHISTO_S1_NAME_DEVICE;
-
-			break;
-*/
-	default:
-		*name = EMPTY_NAME_DEVICE;
-		PERROR("Invalid PCI device id.\n");
-
-		return ME_ERRNO_INTERNAL;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int medummy_query_number_subdevices(me_device_t *device, int *number)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_number_channels(me_device_t *device,
-					 int subdevice, int *number)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_number_ranges(me_device_t *device,
-				       int subdevice, int unit, int *count)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_subdevice_type(me_device_t *device,
-					int subdevice, int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_subdevice_caps(me_device_t *device,
-					int subdevice, int *caps)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_subdevice_caps_args(me_device_t *device,
-					     int subdevice,
-					     int cap, int *args, int count)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int medummy_query_subdevice_by_type(me_device_t *device,
-					   int start_subdevice,
-					   int type,
-					   int subtype, int *subdevice)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_range_by_min_max(me_device_t *device,
-					  int subdevice,
-					  int unit,
-					  int *min,
-					  int *max, int *maxdata, int *range)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_range_info(me_device_t *device,
-				    int subdevice,
-				    int range,
-				    int *unit, int *min, int *max, int *maxdata)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-int medummy_query_timer(me_device_t *device,
-			int subdevice,
-			int timer,
-			int *base_frequency,
-			uint64_t *min_ticks, uint64_t *max_ticks)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_DEVICE_UNPLUGGED;
-}
-
-static int medummy_query_version_device_driver(me_device_t *device,
-					       int *version)
-{
-	PDEBUG("executed.\n");
-
-	*version = ME_VERSION_DRIVER;
-	return ME_ERRNO_SUCCESS;
-}
-
-static void medummy_destructor(me_device_t *device)
-{
-	PDEBUG("executed.\n");
-	kfree(device);
-}
-
-static int init_device_info(unsigned short vendor_id,
-			    unsigned short device_id,
-			    unsigned int serial_no,
-			    int bus_type,
-			    int bus_no,
-			    int dev_no,
-			    int func_no, medummy_device_t *instance)
-{
-	PDEBUG("executed.\n");
-
-//      instance->magic = MEDUMMY_MAGIC_NUMBER;
-	instance->vendor_id = vendor_id;
-	instance->device_id = device_id;
-	instance->serial_no = serial_no;
-	instance->bus_type = bus_type;
-	instance->bus_no = bus_no;
-	instance->dev_no = dev_no;
-	instance->func_no = func_no;
-
-	return 0;
-}
-
-static int medummy_config_load(me_device_t *device, struct file *filep,
-			       me_cfg_device_entry_t *config)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_SUCCESS;
-}
-
-static int init_device_instance(me_device_t *device)
-{
-	PDEBUG("executed.\n");
-
-	INIT_LIST_HEAD(&device->list);
-
-	device->me_device_io_irq_start = medummy_io_irq_start;
-	device->me_device_io_irq_wait = medummy_io_irq_wait;
-	device->me_device_io_irq_stop = medummy_io_irq_stop;
-	device->me_device_io_reset_device = medummy_io_reset_device;
-	device->me_device_io_reset_subdevice = medummy_io_reset_subdevice;
-	device->me_device_io_single_config = medummy_io_single_config;
-	device->me_device_io_single_read = medummy_io_single_read;
-	device->me_device_io_single_write = medummy_io_single_write;
-	device->me_device_io_stream_config = medummy_io_stream_config;
-	device->me_device_io_stream_new_values = medummy_io_stream_new_values;
-	device->me_device_io_stream_read = medummy_io_stream_read;
-	device->me_device_io_stream_start = medummy_io_stream_start;
-	device->me_device_io_stream_status = medummy_io_stream_status;
-	device->me_device_io_stream_stop = medummy_io_stream_stop;
-	device->me_device_io_stream_write = medummy_io_stream_write;
-
-	device->me_device_lock_device = medummy_lock_device;
-	device->me_device_lock_subdevice = medummy_lock_subdevice;
-
-	device->me_device_query_description_device =
-	    medummy_query_description_device;
-	device->me_device_query_info_device = medummy_query_info_device;
-	device->me_device_query_name_device_driver =
-	    medummy_query_name_device_driver;
-	device->me_device_query_name_device = medummy_query_name_device;
-
-	device->me_device_query_number_subdevices =
-	    medummy_query_number_subdevices;
-	device->me_device_query_number_channels = medummy_query_number_channels;
-	device->me_device_query_number_ranges = medummy_query_number_ranges;
-
-	device->me_device_query_range_by_min_max =
-	    medummy_query_range_by_min_max;
-	device->me_device_query_range_info = medummy_query_range_info;
-
-	device->me_device_query_subdevice_type = medummy_query_subdevice_type;
-	device->me_device_query_subdevice_by_type =
-	    medummy_query_subdevice_by_type;
-	device->me_device_query_subdevice_caps = medummy_query_subdevice_caps;
-	device->me_device_query_subdevice_caps_args =
-	    medummy_query_subdevice_caps_args;
-
-	device->me_device_query_timer = medummy_query_timer;
-
-	device->me_device_query_version_device_driver =
-	    medummy_query_version_device_driver;
-
-	device->me_device_destructor = medummy_destructor;
-	device->me_device_config_load = medummy_config_load;
-	return 0;
-}
-
-me_device_t *medummy_constructor(unsigned short vendor_id,
-				 unsigned short device_id,
-				 unsigned int serial_no,
-				 int bus_type,
-				 int bus_no, int dev_no, int func_no)
-{
-	int result = 0;
-	medummy_device_t *instance;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate structure for device attributes */
-	instance = kmalloc(sizeof(medummy_device_t), GFP_KERNEL);
-
-	if (!instance) {
-		PERROR("Can't get memory for device instance.\n");
-		return NULL;
-	}
-
-	memset(instance, 0, sizeof(medummy_device_t));
-
-	/* Initialize device info */
-	result = init_device_info(vendor_id,
-				  device_id,
-				  serial_no,
-				  bus_type, bus_no, dev_no, func_no, instance);
-
-	if (result) {
-		PERROR("Cannot init baord info.\n");
-		kfree(instance);
-		return NULL;
-	}
-
-	/* Initialize device instance */
-	result = init_device_instance((me_device_t *) instance);
-
-	if (result) {
-		PERROR("Cannot init baord info.\n");
-		kfree(instance);
-		return NULL;
-	}
-
-	return (me_device_t *) instance;
-}
-EXPORT_SYMBOL(medummy_constructor);
-
-// Init and exit of module.
-
-static int __init dummy_init(void)
-{
-	PDEBUG("executed.\n");
-	return 0;
-}
-
-static void __exit dummy_exit(void)
-{
-	PDEBUG("executed.\n");
-}
-
-module_init(dummy_init);
-
-module_exit(dummy_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for Meilhaus ME-DUMMY Devices");
-MODULE_SUPPORTED_DEVICE("Meilhaus ME-DUMMY Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/medummy.h b/drivers/staging/meilhaus/medummy.h
deleted file mode 100644
index 717000f..0000000
--- a/drivers/staging/meilhaus/medummy.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : medummy.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- */
-
-#ifndef _MEDUMMY_H_
-#define _MEDUMMY_H_
-
-#include "metypes.h"
-#include "medefines.h"
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-#define MEDUMMY_MAGIC_NUMBER	0xDDDD
-
-typedef struct medummy_device {
-	me_device_t base;			/**< The Meilhaus device base class. */
-//      int magic;                                      /**< The magic number of the structure */
-	unsigned short vendor_id;	/**< Vendor ID */
-	unsigned short device_id;	/**< Device ID */
-	unsigned int serial_no;		/**< Serial number of the device */
-	int bus_type;				/**< Bus type */
-	int bus_no;					/**< Bus number */
-	int dev_no;					/**< Device number */
-	int func_no;				/**< Function number */
-} medummy_device_t;
-
-me_device_t *medummy_constructor(unsigned short vendor_id,
-				 unsigned short device_id,
-				 unsigned int serial_no,
-				 int bus_type,
-				 int bus_no,
-				 int dev_no,
-				 int func_no) __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/meerror.h b/drivers/staging/meilhaus/meerror.h
deleted file mode 100644
index 9eda4bf..0000000
--- a/drivers/staging/meilhaus/meerror.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : meerror.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- * Author      : KG (Krzysztof Gantzke)	<k.gantzke@xxxxxxxxxxx>
- */
-
-#ifndef _MEERROR_H_
-#define _MEERROR_H_
-
-extern char *meErrorMsgTable[];
-
-#define ME_ERRNO_SUCCESS						0
-#define ME_ERRNO_INVALID_DEVICE					1
-#define ME_ERRNO_INVALID_SUBDEVICE				2
-#define ME_ERRNO_INVALID_CHANNEL				3
-#define ME_ERRNO_INVALID_SINGLE_CONFIG			4
-#define ME_ERRNO_INVALID_REF					5
-#define ME_ERRNO_INVALID_TRIG_CHAN				6
-#define ME_ERRNO_INVALID_TRIG_TYPE				7
-#define ME_ERRNO_INVALID_TRIG_EDGE				8
-#define ME_ERRNO_INVALID_TIMEOUT				9
-#define ME_ERRNO_INVALID_FLAGS					10
-#define ME_ERRNO_OPEN							11
-#define ME_ERRNO_CLOSE							12
-#define ME_ERRNO_NOT_OPEN						13
-#define ME_ERRNO_INVALID_DIR					14
-#define ME_ERRNO_PREVIOUS_CONFIG				15
-#define ME_ERRNO_NOT_SUPPORTED					16
-#define ME_ERRNO_SUBDEVICE_TYPE					17
-#define ME_ERRNO_USER_BUFFER_SIZE				18
-#define ME_ERRNO_LOCKED							19
-#define ME_ERRNO_NOMORE_SUBDEVICE_TYPE			20
-#define ME_ERRNO_TIMEOUT						21
-#define ME_ERRNO_SIGNAL							22
-#define ME_ERRNO_INVALID_IRQ_SOURCE				23
-#define ME_ERRNO_THREAD_RUNNING					24
-#define ME_ERRNO_START_THREAD					25
-#define ME_ERRNO_CANCEL_THREAD					26
-#define ME_ERRNO_NO_CALLBACK					27
-#define ME_ERRNO_USED							28
-#define ME_ERRNO_INVALID_UNIT					29
-#define ME_ERRNO_INVALID_MIN_MAX				30
-#define ME_ERRNO_NO_RANGE						31
-#define ME_ERRNO_INVALID_RANGE					32
-#define ME_ERRNO_SUBDEVICE_BUSY					33
-#define ME_ERRNO_INVALID_LOCK					34
-#define ME_ERRNO_INVALID_SWITCH					35
-#define ME_ERRNO_INVALID_ERROR_MSG_COUNT		36
-#define ME_ERRNO_INVALID_STREAM_CONFIG			37
-#define ME_ERRNO_INVALID_CONFIG_LIST_COUNT		38
-#define ME_ERRNO_INVALID_ACQ_START_TRIG_TYPE	39
-#define ME_ERRNO_INVALID_ACQ_START_TRIG_EDGE	40
-#define ME_ERRNO_INVALID_ACQ_START_TRIG_CHAN	41
-#define ME_ERRNO_INVALID_ACQ_START_TIMEOUT		42
-#define ME_ERRNO_INVALID_ACQ_START_ARG			43
-#define ME_ERRNO_INVALID_SCAN_START_TRIG_TYPE	44
-#define ME_ERRNO_INVALID_SCAN_START_ARG			45
-#define ME_ERRNO_INVALID_CONV_START_TRIG_TYPE	46
-#define ME_ERRNO_INVALID_CONV_START_ARG			47
-#define ME_ERRNO_INVALID_SCAN_STOP_TRIG_TYPE	48
-#define ME_ERRNO_INVALID_SCAN_STOP_ARG			49
-#define ME_ERRNO_INVALID_ACQ_STOP_TRIG_TYPE		50
-#define ME_ERRNO_INVALID_ACQ_STOP_ARG			51
-#define ME_ERRNO_SUBDEVICE_NOT_RUNNING			52
-#define ME_ERRNO_INVALID_READ_MODE				53
-#define ME_ERRNO_INVALID_VALUE_COUNT			54
-#define ME_ERRNO_INVALID_WRITE_MODE				55
-#define ME_ERRNO_INVALID_TIMER					56
-#define ME_ERRNO_DEVICE_UNPLUGGED				57
-#define ME_ERRNO_USED_INTERNAL					58
-#define ME_ERRNO_INVALID_DUTY_CYCLE				59
-#define ME_ERRNO_INVALID_WAIT					60
-#define ME_ERRNO_CONNECT_REMOTE					61
-#define ME_ERRNO_COMMUNICATION					62
-#define ME_ERRNO_INVALID_SINGLE_LIST			63
-#define ME_ERRNO_INVALID_MODULE_TYPE			64
-#define ME_ERRNO_INVALID_START_MODE				65
-#define ME_ERRNO_INVALID_STOP_MODE				66
-#define ME_ERRNO_INVALID_FIFO_IRQ_THRESHOLD		67
-#define ME_ERRNO_INVALID_POINTER				68
-#define ME_ERRNO_CREATE_EVENT					69
-#define ME_ERRNO_LACK_OF_RESOURCES				70
-#define ME_ERRNO_CANCELLED						71
-#define ME_ERRNO_RING_BUFFER_OVERFLOW			72
-#define ME_ERRNO_RING_BUFFER_UNDEFFLOW			73
-#define ME_ERRNO_INVALID_IRQ_EDGE				74
-#define ME_ERRNO_INVALID_IRQ_ARG				75
-#define ME_ERRNO_INVALID_CAP					76
-#define ME_ERRNO_INVALID_CAP_ARG_COUNT			77
-#define ME_ERRNO_INTERNAL						78
-
-/** New error for range check */
-#define ME_ERRNO_VALUE_OUT_OF_RANGE				79
-#define ME_ERRNO_FIFO_BUFFER_OVERFLOW			80
-#define ME_ERRNO_FIFO_BUFFER_UNDEFFLOW			81
-
-#define ME_ERRNO_INVALID_ERROR_NUMBER			82
-#endif
diff --git a/drivers/staging/meilhaus/mefirmware.c b/drivers/staging/meilhaus/mefirmware.c
deleted file mode 100644
index c07d202..0000000
--- a/drivers/staging/meilhaus/mefirmware.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/**
- * @file mefirmware.c
- *
- * @brief Implements the firmware handling.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/***************************************************************************
- *   Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)     *
- *   Copyright (C) 2007 by Krzysztof Gantzke k.gantzke@xxxxxxxxxxx         *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- ***************************************************************************/
-
-#ifndef __KERNEL__
-# define __KERNEL__
-#endif
-
-#ifndef KBUILD_MODNAME
-#  define KBUILD_MODNAME KBUILD_STR(mefirmware)
-#endif
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include <linux/firmware.h>
-
-#include "meplx_reg.h"
-#include "medebug.h"
-
-#include "mefirmware.h"
-
-int me_xilinx_download(unsigned long register_base_control,
-		       unsigned long register_base_data,
-		       struct device *dev, const char *firmware_name)
-{
-	int err = ME_ERRNO_FIRMWARE;
-	uint32_t value = 0;
-	int idx = 0;
-
-	const struct firmware *fw;
-
-	PDEBUG("executed.\n");
-
-	if (!firmware_name) {
-		PERROR("Request for firmware failed. No name provided. \n");
-		return err;
-	}
-
-	PINFO("Request '%s' firmware.\n", firmware_name);
-	err = request_firmware(&fw, firmware_name, dev);
-
-	if (err) {
-		PERROR("Request for firmware failed.\n");
-		return err;
-	}
-	// Set PLX local interrupt 2 polarity to high.
-	// Interrupt is thrown by init pin of xilinx.
-	outl(PLX_INTCSR_LOCAL_INT2_POL, register_base_control + PLX_INTCSR);
-
-	// Set /CS and /WRITE of the Xilinx
-	value = inl(register_base_control + PLX_ICR);
-	value |= ME_FIRMWARE_CS_WRITE;
-	outl(value, register_base_control + PLX_ICR);
-
-	// Init Xilinx with CS1
-	inl(register_base_data + ME_XILINX_CS1_REG);
-
-	// Wait for init to complete
-	udelay(20);
-
-	// Checkl /INIT pin
-	if (!
-	    (inl(register_base_control + PLX_INTCSR) &
-	     PLX_INTCSR_LOCAL_INT2_STATE)) {
-		PERROR("Can't init Xilinx.\n");
-		release_firmware(fw);
-		return -EIO;
-	}
-	// Reset /CS and /WRITE of the Xilinx
-	value = inl(register_base_control + PLX_ICR);
-	value &= ~ME_FIRMWARE_CS_WRITE;
-	outl(value, register_base_control + PLX_ICR);
-
-	// Download Xilinx firmware
-	udelay(10);
-
-	for (idx = 0; idx < fw->size; idx++) {
-		outl(fw->data[idx], register_base_data);
-#ifdef ME6000_v2_4
-///     This checking only for board's version 2.4
-		// Check if BUSY flag is set (low = ready, high = busy)
-		if (inl(register_base_control + PLX_ICR) &
-		    ME_FIRMWARE_BUSY_FLAG) {
-			PERROR("Xilinx is still busy (idx = %d)\n", idx);
-			release_firmware(fw);
-			return -EIO;
-		}
-#endif //ME6000_v2_4
-	}
-	PDEBUG("Download finished. %d bytes written to PLX.\n", idx);
-
-	// If done flag is high download was successful
-	if (inl(register_base_control + PLX_ICR) & ME_FIRMWARE_DONE_FLAG) {
-		PDEBUG("SUCCESS. Done flag is set.\n");
-	} else {
-		PERROR("FAILURE. DONE flag is not set.\n");
-		release_firmware(fw);
-		return -EIO;
-	}
-
-	// Set /CS and /WRITE
-	value = inl(register_base_control + PLX_ICR);
-	value |= ME_FIRMWARE_CS_WRITE;
-	outl(value, register_base_control + PLX_ICR);
-
-	PDEBUG("Enable interrupts on the PCI interface.\n");
-	outl(ME_PLX_PCI_ACTIVATE, register_base_control + PLX_INTCSR);
-	release_firmware(fw);
-
-	return 0;
-}
diff --git a/drivers/staging/meilhaus/mefirmware.h b/drivers/staging/meilhaus/mefirmware.h
deleted file mode 100644
index a268508..0000000
--- a/drivers/staging/meilhaus/mefirmware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/**
- * @file mefirmware.h
- *
- * @brief Definitions of the firmware handling functions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/***************************************************************************
- *   Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)     *
- *   Copyright (C) 2007 by Krzysztof Gantzke k.gantzke@xxxxxxxxxxx         *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- ***************************************************************************/
-
-#ifndef _MEFIRMWARE_H
-# define _MEFIRMWARE_H
-
-# ifdef __KERNEL__
-
-#define ME_ERRNO_FIRMWARE		-1
-
-/**
-* Registry
-*/
-#define ME_XILINX_CS1_REG		0x00C8
-
-/**
-* Flags (bits)
-*/
-
-#define ME_FIRMWARE_BUSY_FLAG	0x00000020
-#define ME_FIRMWARE_DONE_FLAG	0x00000004
-#define ME_FIRMWARE_CS_WRITE	0x00000100
-
-#define ME_PLX_PCI_ACTIVATE		0x43
-
-int me_xilinx_download(unsigned long register_base_control,
-		       unsigned long register_base_data,
-		       struct device *dev, const char *firmware_name);
-
-# endif	//__KERNEL__
-
-#endif //_MEFIRMWARE_H
diff --git a/drivers/staging/meilhaus/meids.h b/drivers/staging/meilhaus/meids.h
deleted file mode 100644
index b3e757c..0000000
--- a/drivers/staging/meilhaus/meids.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : meids.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- */
-
-#ifndef _MEIDS_H_
-#define _MEIDS_H_
-
-#ifdef __KERNEL__
-
-/*=============================================================================
-  Driver names
-  ===========================================================================*/
-
-#define MEMAIN_NAME				"memain"
-#define ME1000_NAME				"me1000"
-#define ME1400_NAME				"me1400"
-#define ME1600_NAME				"me1600"
-#define ME4600_NAME				"me4600"
-#define ME6000_NAME				"me6000"
-#define ME0600_NAME				"me0600"	//"me630"
-#define ME8100_NAME				"me8100"
-#define ME8200_NAME				"me8200"
-#define ME0900_NAME				"me0900"	//"me9x"
-//#define MEPHISTO_S1_NAME                      "mephisto_s1"
-#define MEDUMMY_NAME			"medummy"
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/meinternal.h b/drivers/staging/meilhaus/meinternal.h
deleted file mode 100644
index 8d126b4..0000000
--- a/drivers/staging/meilhaus/meinternal.h
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : meinternal.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- */
-
-#ifndef _MEINTERNAL_H_
-#define _MEINTERNAL_H_
-
-/*=============================================================================
-  PCI Vendor IDs
-  ===========================================================================*/
-
-#define PCI_VENDOR_ID_MEILHAUS						0x1402
-
-/*=============================================================================
-  PCI Device IDs
-  ===========================================================================*/
-
-#define PCI_DEVICE_ID_MEILHAUS_ME1000				0x1000
-#define PCI_DEVICE_ID_MEILHAUS_ME1000_A				0x100A
-#define PCI_DEVICE_ID_MEILHAUS_ME1000_B				0x100B
-
-#define PCI_DEVICE_ID_MEILHAUS_ME1400				0x1400
-#define PCI_DEVICE_ID_MEILHAUS_ME140A				0x140A
-#define PCI_DEVICE_ID_MEILHAUS_ME140B				0x140B
-#define PCI_DEVICE_ID_MEILHAUS_ME14E0				0x14E0
-#define PCI_DEVICE_ID_MEILHAUS_ME14EA				0x14EA
-#define PCI_DEVICE_ID_MEILHAUS_ME14EB				0x14EB
-#define PCI_DEVICE_ID_MEILHAUS_ME140C				0X140C
-#define PCI_DEVICE_ID_MEILHAUS_ME140D				0X140D
-
-#define PCI_DEVICE_ID_MEILHAUS_ME1600_4U			0x1604 // 4 voltage outputs
-#define PCI_DEVICE_ID_MEILHAUS_ME1600_8U			0x1608 // 8 voltage outputs
-#define PCI_DEVICE_ID_MEILHAUS_ME1600_12U			0x160C // 12 voltage outputs
-#define PCI_DEVICE_ID_MEILHAUS_ME1600_16U			0x160F // 16 voltage outputs
-#define PCI_DEVICE_ID_MEILHAUS_ME1600_16U_8I		0x168F // 16 voltage/8 current o.
-
-#define PCI_DEVICE_ID_MEILHAUS_ME4610				0x4610 // Jekyll
-
-#define PCI_DEVICE_ID_MEILHAUS_ME4650				0x4650 // Low Cost version
-
-#define PCI_DEVICE_ID_MEILHAUS_ME4660				0x4660 // Standard version
-#define PCI_DEVICE_ID_MEILHAUS_ME4660I				0x4661 // Isolated version
-#define PCI_DEVICE_ID_MEILHAUS_ME4660S				0x4662 // Standard version with Sample and Hold
-#define PCI_DEVICE_ID_MEILHAUS_ME4660IS				0x4663 // Isolated version with Sample and Hold
-
-#define PCI_DEVICE_ID_MEILHAUS_ME4670				0x4670 // Standard version
-#define PCI_DEVICE_ID_MEILHAUS_ME4670I				0x4671 // Isolated version
-#define PCI_DEVICE_ID_MEILHAUS_ME4670S				0x4672 // Standard version with Sample and Hold
-#define PCI_DEVICE_ID_MEILHAUS_ME4670IS				0x4673 // Isolated version with Sample and Hold
-
-#define PCI_DEVICE_ID_MEILHAUS_ME4680				0x4680 // Standard version
-#define PCI_DEVICE_ID_MEILHAUS_ME4680I				0x4681 // Isolated version
-#define PCI_DEVICE_ID_MEILHAUS_ME4680S				0x4682 // Standard version with Sample and Hold
-#define PCI_DEVICE_ID_MEILHAUS_ME4680IS				0x4683 // Isolated version with Sample and Hold
-
-/* ME6000 standard version */
-#define PCI_DEVICE_ID_MEILHAUS_ME6004   			0x6004
-#define PCI_DEVICE_ID_MEILHAUS_ME6008   			0x6008
-#define PCI_DEVICE_ID_MEILHAUS_ME600F   			0x600F
-
-/* ME6000 isolated version */
-#define PCI_DEVICE_ID_MEILHAUS_ME6014   			0x6014
-#define PCI_DEVICE_ID_MEILHAUS_ME6018   			0x6018
-#define PCI_DEVICE_ID_MEILHAUS_ME601F   			0x601F
-
-/* ME6000 isle version */
-#define PCI_DEVICE_ID_MEILHAUS_ME6034   			0x6034
-#define PCI_DEVICE_ID_MEILHAUS_ME6038   			0x6038
-#define PCI_DEVICE_ID_MEILHAUS_ME603F   			0x603F
-
-/* ME6000 standard version with DIO */
-#define PCI_DEVICE_ID_MEILHAUS_ME6044   			0x6044
-#define PCI_DEVICE_ID_MEILHAUS_ME6048   			0x6048
-#define PCI_DEVICE_ID_MEILHAUS_ME604F   			0x604F
-
-/* ME6000 isolated version with DIO */
-#define PCI_DEVICE_ID_MEILHAUS_ME6054   			0x6054
-#define PCI_DEVICE_ID_MEILHAUS_ME6058   			0x6058
-#define PCI_DEVICE_ID_MEILHAUS_ME605F   			0x605F
-
-/* ME6000 isle version with DIO */
-#define PCI_DEVICE_ID_MEILHAUS_ME6074   			0x6074
-#define PCI_DEVICE_ID_MEILHAUS_ME6078   			0x6078
-#define PCI_DEVICE_ID_MEILHAUS_ME607F   			0x607F
-
-/* ME6100 standard version */
-#define PCI_DEVICE_ID_MEILHAUS_ME6104   			0x6104
-#define PCI_DEVICE_ID_MEILHAUS_ME6108   			0x6108
-#define PCI_DEVICE_ID_MEILHAUS_ME610F   			0x610F
-
-/* ME6100 isolated version */
-#define PCI_DEVICE_ID_MEILHAUS_ME6114   			0x6114
-#define PCI_DEVICE_ID_MEILHAUS_ME6118   			0x6118
-#define PCI_DEVICE_ID_MEILHAUS_ME611F   			0x611F
-
-/* ME6100 isle version */
-#define PCI_DEVICE_ID_MEILHAUS_ME6134   			0x6134
-#define PCI_DEVICE_ID_MEILHAUS_ME6138   			0x6138
-#define PCI_DEVICE_ID_MEILHAUS_ME613F   			0x613F
-
-/* ME6100 standard version with DIO */
-#define PCI_DEVICE_ID_MEILHAUS_ME6144				0x6144
-#define PCI_DEVICE_ID_MEILHAUS_ME6148   			0x6148
-#define PCI_DEVICE_ID_MEILHAUS_ME614F   			0x614F
-
-/* ME6100 isolated version with DIO */
-#define PCI_DEVICE_ID_MEILHAUS_ME6154   			0x6154
-#define PCI_DEVICE_ID_MEILHAUS_ME6158   			0x6158
-#define PCI_DEVICE_ID_MEILHAUS_ME615F   			0x615F
-
-/* ME6100 isle version with DIO */
-#define PCI_DEVICE_ID_MEILHAUS_ME6174   			0x6174
-#define PCI_DEVICE_ID_MEILHAUS_ME6178   			0x6178
-#define PCI_DEVICE_ID_MEILHAUS_ME617F   			0x617F
-
-/* ME6200 isolated version with DIO */
-#define PCI_DEVICE_ID_MEILHAUS_ME6259				0x6259
-
-/* ME6300 isolated version with DIO */
-#define PCI_DEVICE_ID_MEILHAUS_ME6359				0x6359
-
-/* ME0630 */
-#define PCI_DEVICE_ID_MEILHAUS_ME0630				0x0630
-
-/* ME8100 */
-#define PCI_DEVICE_ID_MEILHAUS_ME8100_A				0x810A
-#define PCI_DEVICE_ID_MEILHAUS_ME8100_B  			0x810B
-
-/* ME8200 */
-#define PCI_DEVICE_ID_MEILHAUS_ME8200_A				0x820A
-#define PCI_DEVICE_ID_MEILHAUS_ME8200_B  			0x820B
-
-/* ME0900 */
-#define PCI_DEVICE_ID_MEILHAUS_ME0940				0x0940
-#define PCI_DEVICE_ID_MEILHAUS_ME0950				0x0950
-#define PCI_DEVICE_ID_MEILHAUS_ME0960				0x0960
-
-
-/*=============================================================================
-  USB Vendor IDs
-  ===========================================================================*/
-
-//#define USB_VENDOR_ID_MEPHISTO_S1					0x0403
-
-
-/*=============================================================================
-  USB Device IDs
-  ===========================================================================*/
-
-//#define USB_DEVICE_ID_MEPHISTO_S1					0xDCD0
-
-
-/* ME-1000 defines */
-#define ME1000_NAME_DRIVER							"ME-1000"
-
-#define ME1000_NAME_DEVICE_ME1000					"ME-1000"
-
-#define ME1000_DESCRIPTION_DEVICE_ME1000			"ME-1000 device, 128 digital i/o lines."
-
-/* ME-1400 defines */
-#define ME1400_NAME_DRIVER							"ME-1400"
-
-#define ME1400_NAME_DEVICE_ME1400					"ME-1400"
-#define ME1400_NAME_DEVICE_ME1400E					"ME-1400E"
-#define ME1400_NAME_DEVICE_ME1400A					"ME-1400A"
-#define ME1400_NAME_DEVICE_ME1400EA					"ME-1400EA"
-#define ME1400_NAME_DEVICE_ME1400B					"ME-1400B"
-#define ME1400_NAME_DEVICE_ME1400EB					"ME-1400EB"
-#define ME1400_NAME_DEVICE_ME1400C					"ME-1400C"
-#define ME1400_NAME_DEVICE_ME1400D					"ME-1400D"
-
-#define ME1400_DESCRIPTION_DEVICE_ME1400			"ME-1400 device, 24 digital i/o lines."
-#define ME1400_DESCRIPTION_DEVICE_ME1400E			"ME-1400E device, 24 digital i/o lines."
-#define ME1400_DESCRIPTION_DEVICE_ME1400A			"ME-1400A device, 24 digital i/o lines, 3 counters."
-#define ME1400_DESCRIPTION_DEVICE_ME1400EA			"ME-1400EA device, 24 digital i/o lines, 3 counters."
-#define ME1400_DESCRIPTION_DEVICE_ME1400B			"ME-1400B device, 48 digital i/o lines, 6 counters."
-#define ME1400_DESCRIPTION_DEVICE_ME1400EB			"ME-1400EB device, 48 digital i/o lines, 6 counters."
-#define ME1400_DESCRIPTION_DEVICE_ME1400C			"ME-1400C device, 24 digital i/o lines, 15 counters."
-#define ME1400_DESCRIPTION_DEVICE_ME1400D			"ME-1400D device, 48 digital i/o lines, 30 counters."
-
-/* ME-1600 defines */
-#define ME1600_NAME_DRIVER							"ME-1600"
-
-#define ME1600_NAME_DEVICE_ME16004U					"ME-1600/4U"
-#define ME1600_NAME_DEVICE_ME16008U					"ME-1600/8U"
-#define ME1600_NAME_DEVICE_ME160012U				"ME-1600/12U"
-#define ME1600_NAME_DEVICE_ME160016U				"ME-1600/16U"
-#define ME1600_NAME_DEVICE_ME160016U8I				"ME-1600/16U8I"
-
-#define ME1600_DESCRIPTION_DEVICE_ME16004U			"ME-1600/4U device, 4 voltage outputs."
-#define ME1600_DESCRIPTION_DEVICE_ME16008U			"ME-1600/8U device, 8 voltage outputs."
-#define ME1600_DESCRIPTION_DEVICE_ME160012U			"ME-1600/12U device, 12 voltage outputs."
-#define ME1600_DESCRIPTION_DEVICE_ME160016U			"ME-1600/16U device, 16 voltage outputs."
-#define ME1600_DESCRIPTION_DEVICE_ME160016U8I		"ME-1600/16U8I device, 16 voltage, 8 current outputs."
-
-/* ME-4000 defines */
-#define ME4600_NAME_DRIVER							"ME-4600"
-
-#define ME4600_NAME_DEVICE_ME4610					"ME-4610"
-#define ME4600_NAME_DEVICE_ME4650					"ME-4650"
-#define ME4600_NAME_DEVICE_ME4660					"ME-4660"
-#define ME4600_NAME_DEVICE_ME4660I					"ME-4660I"
-#define ME4600_NAME_DEVICE_ME4660S					"ME-4660S"
-#define ME4600_NAME_DEVICE_ME4660IS					"ME-4660IS"
-#define ME4600_NAME_DEVICE_ME4670					"ME-4670"
-#define ME4600_NAME_DEVICE_ME4670I					"ME-4670I"
-#define ME4600_NAME_DEVICE_ME4670S					"ME-4670S"
-#define ME4600_NAME_DEVICE_ME4670IS					"ME-4670IS"
-#define ME4600_NAME_DEVICE_ME4680					"ME-4680"
-#define ME4600_NAME_DEVICE_ME4680I					"ME-4680I"
-#define ME4600_NAME_DEVICE_ME4680S					"ME-4680S"
-#define ME4600_NAME_DEVICE_ME4680IS					"ME-4680IS"
-
-#define ME4600_DESCRIPTION_DEVICE_ME4610			"ME-4610 device, 16 streaming analog inputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4650			"ME-4650 device, 16 streaming analog inputs, 32 digital i/o lines, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4660			"ME-4660 device, 16 streaming analog inputs, 2 single analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4660I			"ME-4660I opto isolated device, 16 streaming analog inputs, 2 single analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4660S			"ME-4660 device, 16 streaming analog inputs (8 S&H), 2 single analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4660IS			"ME-4660I opto isolated device, 16 streaming analog inputs (8 S&H), 2 single analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4670			"ME-4670 device, 32 streaming analog inputs, 4 single analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4670I			"ME-4670I opto isolated device, 32 streaming analog inputs, 4 single analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4670S			"ME-4670S device, 32 streaming analog inputs (8 S&H), 4 single analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4670IS			"ME-4670IS opto isolated device, 32 streaming analog inputs (8 S&H), 4 single analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4680			"ME-4680 device, 32 streaming analog inputs, 4 streaming analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4680I			"ME-4680I opto isolated device, 32 streaming analog inputs, 4 streaming analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4680S			"ME-4680S device, 32 streaming analog inputs, 4 streaming analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-#define ME4600_DESCRIPTION_DEVICE_ME4680IS			"ME-4680IS opto isolated device, 32 streaming analog inputs (8 S&H), 4 streaming analog outputs, 32 digital i/o lines, 3 counters, 1 external interrupt."
-
-/* ME-6000 defines */
-#define ME6000_NAME_DRIVER							"ME-6000"
-
-#define ME6000_NAME_DEVICE_ME60004					"ME-6000/4"
-#define ME6000_NAME_DEVICE_ME60008					"ME-6000/8"
-#define ME6000_NAME_DEVICE_ME600016					"ME-6000/16"
-#define ME6000_NAME_DEVICE_ME6000I4					"ME-6000I/4"
-#define ME6000_NAME_DEVICE_ME6000I8					"ME-6000I/8"
-#define ME6000_NAME_DEVICE_ME6000I16				"ME-6000I/16"
-#define ME6000_NAME_DEVICE_ME6000ISLE4				"ME-6000ISLE/4"
-#define ME6000_NAME_DEVICE_ME6000ISLE8				"ME-6000ISLE/8"
-#define ME6000_NAME_DEVICE_ME6000ISLE16				"ME-6000ISLE/16"
-#define ME6000_NAME_DEVICE_ME61004					"ME-6100/4"
-#define ME6000_NAME_DEVICE_ME61008					"ME-6100/8"
-#define ME6000_NAME_DEVICE_ME610016					"ME-6100/16"
-#define ME6000_NAME_DEVICE_ME6100I4					"ME-6100I/4"
-#define ME6000_NAME_DEVICE_ME6100I8					"ME-6100I/8"
-#define ME6000_NAME_DEVICE_ME6100I16				"ME-6100I/16"
-#define ME6000_NAME_DEVICE_ME6100ISLE4				"ME-6100ISLE/4"
-#define ME6000_NAME_DEVICE_ME6100ISLE8				"ME-6100ISLE/8"
-#define ME6000_NAME_DEVICE_ME6100ISLE16				"ME-6100ISLE/16"
-#define ME6000_NAME_DEVICE_ME60004DIO				"ME-6000/4/DIO"
-#define ME6000_NAME_DEVICE_ME60008DIO				"ME-6000/8/DIO"
-#define ME6000_NAME_DEVICE_ME600016DIO				"ME-6000/16/DIO"
-#define ME6000_NAME_DEVICE_ME6000I4DIO				"ME-6000I/4/DIO"
-#define ME6000_NAME_DEVICE_ME6000I8DIO				"ME-6000I/8/DIO"
-#define ME6000_NAME_DEVICE_ME6000I16DIO				"ME-6000I/16/DIO"
-#define ME6000_NAME_DEVICE_ME6000ISLE4DIO			"ME-6000ISLE/4/DIO"
-#define ME6000_NAME_DEVICE_ME6000ISLE8DIO			"ME-6000ISLE/8/DIO"
-#define ME6000_NAME_DEVICE_ME6000ISLE16DIO			"ME-6000ISLE/16/DIO"
-#define ME6000_NAME_DEVICE_ME61004DIO				"ME-6100/4/DIO"
-#define ME6000_NAME_DEVICE_ME61008DIO				"ME-6100/8/DIO"
-#define ME6000_NAME_DEVICE_ME610016DIO				"ME-6100/16/DIO"
-#define ME6000_NAME_DEVICE_ME6100I4DIO				"ME-6100I/4/DIO"
-#define ME6000_NAME_DEVICE_ME6100I8DIO				"ME-6100I/8/DIO"
-#define ME6000_NAME_DEVICE_ME6100I16DIO				"ME-6100I/16/DIO"
-#define ME6000_NAME_DEVICE_ME6100ISLE4DIO			"ME-6100ISLE/4/DIO"
-#define ME6000_NAME_DEVICE_ME6100ISLE8DIO			"ME-6100ISLE/8/DIO"
-#define ME6000_NAME_DEVICE_ME6100ISLE16DIO			"ME-6100ISLE/16/DIO"
-#define ME6000_NAME_DEVICE_ME6200I9DIO				"ME-6200I/9/DIO"
-#define ME6000_NAME_DEVICE_ME6300I9DIO				"ME-6300I/9/DIO"
-
-#define ME6000_DESCRIPTION_DEVICE_ME60004			"ME-6000/4 device, 4 single analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME60008			"ME-6000/8 device, 8 single analog outputs"
-#define ME6000_DESCRIPTION_DEVICE_ME600016			"ME-6000/16 device, 16 single analog outputs"
-#define ME6000_DESCRIPTION_DEVICE_ME6000I4			"ME-6000I/4 isolated device, 4 single analog outputs"
-#define ME6000_DESCRIPTION_DEVICE_ME6000I8			"ME-6000I/8 isolated device, 8 single analog outputs"
-#define ME6000_DESCRIPTION_DEVICE_ME6000I16			"ME-6000I/16 isolated device, 16 single analog outputs"
-#define ME6000_DESCRIPTION_DEVICE_ME6000ISLE4		"ME-6000ISLE/4 isle device, 4 single analog outputs"
-#define ME6000_DESCRIPTION_DEVICE_ME6000ISLE8		"ME-6000ISLE/8 isle device, 8 single analog outputs"
-#define ME6000_DESCRIPTION_DEVICE_ME6000ISLE16		"ME-6000ISLE/16 isle device, 16 single analog outputs"
-#define ME6000_DESCRIPTION_DEVICE_ME61004			"ME-6100/4 device, 4 streaming analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME61008			"ME-6100/8 device, 4 streaming, 4 single analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME610016			"ME-6100/16 device, 4 streaming, 12 single analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME6100I4			"ME-6100I/4 isolated device, 4 streaming analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME6100I8			"ME-6100I/8 isolated device, 4 streaming, 4 single analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME6100I16			"ME-6100I/16 isolated device, 4 streaming, 12 single analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME6100ISLE4		"ME-6100ISLE/4 isle device, 4 streaming analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME6100ISLE8		"ME-6100ISLE/8 isle device, 4 streaming, 4 single analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME6100ISLE16		"ME-6100ISLE/16 isle device, 4 streaming, 12 single analog outputs."
-#define ME6000_DESCRIPTION_DEVICE_ME60004DIO		"ME-6000/4/DIO device, 4 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME60008DIO		"ME-6000/8/DIO device, 8 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME600016DIO		"ME-6000/16/DIO device, 8 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6000I4DIO		"ME-6000I/4/DIO isolated device, 4 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6000I8DIO		"ME-6000I/8/DIO isolated device, 8 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6000I16DIO		"ME-6000I/16/DIO isolated device, 16 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6000ISLE4DIO	"ME-6000ISLE/4/DIO isle device, 4 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6000ISLE8DIO	"ME-6000ISLE/8/DIO isle device, 8 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6000ISLE16DIO	"ME-6000ISLE/16/DIO isle device, 16 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME61004DIO		"ME-6100/4/DIO device, 4 streaming analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME61008DIO		"ME-6100/8/DIO device, 4 streaming, 4 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME610016DIO		"ME-6100/16/DIO device, 4 streaming, 12 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6100I4DIO		"ME-6100I/4/DIO isolated device, 4 streaming analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6100I8DIO		"ME-6100I/8/DIO isolated device, 4 streaming, 4 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6100I16DIO		"ME-6100I/16/DIO isolated device, 4 streaming, 12 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6100ISLE4DIO	"ME-6100ISLE/4/DIO isle device, 4 streaming analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6100ISLE8DIO	"ME-6100ISLE/8/DIO isle device, 4 streaming, 4 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6100ISLE16DIO	"ME-6100ISLE/16/DIO isle device, 4 streaming, 12 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6200I9DIO		"ME-6200I/9/DIO isolated device, 9 single analog outputs, 16 digital i/o lines."
-#define ME6000_DESCRIPTION_DEVICE_ME6300I9DIO		"ME-6300I/9/DIO isolated device, 4 streaming, 5 single analog outputs, 16 digital i/o lines."
-
-/* ME-630 defines */
-#define ME0600_NAME_DRIVER							"ME-0600"
-
-#define ME0600_NAME_DEVICE_ME0630					"ME-630"
-
-#define ME0600_DESCRIPTION_DEVICE_ME0630			"ME-630 device, up to 16 relay, 8 digital ttl input lines, 8 isolated digital input lines, 16 digital i/o lines, 2 external interrupts."
-
-/* ME-8100 defines */
-#define ME8100_NAME_DRIVER							"ME-8100"
-
-#define ME8100_NAME_DEVICE_ME8100A					"ME-8100A"
-#define ME8100_NAME_DEVICE_ME8100B					"ME-8100B"
-
-#define ME8100_DESCRIPTION_DEVICE_ME8100A			"ME-8100A opto isolated device, 16 digital input lines, 16 digital output lines."
-#define ME8100_DESCRIPTION_DEVICE_ME8100B			"ME-8100B opto isolated device, 32 digital input lines, 32 digital output lines, 3 counters."
-
-/* ME-8200 defines */
-#define ME8200_NAME_DRIVER							"ME-8200"
-
-#define ME8200_NAME_DEVICE_ME8200A					"ME-8200A"
-#define ME8200_NAME_DEVICE_ME8200B					"ME-8200B"
-
-#define ME8200_DESCRIPTION_DEVICE_ME8200A			"ME-8200A opto isolated device, 8 digital output lines, 8 digital input lines, 16 digital i/o lines."
-#define ME8200_DESCRIPTION_DEVICE_ME8200B			"ME-8200B opto isolated device, 16 digital output lines, 16 digital input lines, 16 digital i/o lines."
-
-/* ME-0900 defines */
-#define ME0900_NAME_DRIVER							"ME-0900"
-
-#define ME0900_NAME_DEVICE_ME0940					"ME-94"
-#define ME0900_NAME_DEVICE_ME0950					"ME-95"
-#define ME0900_NAME_DEVICE_ME0960					"ME-96"
-
-#define ME0900_DESCRIPTION_DEVICE_ME0940			"ME-94 device, 16 digital input lines, 2 external interrupt lines."
-#define ME0900_DESCRIPTION_DEVICE_ME0950			"ME-95 device, 16 digital output lines."
-#define ME0900_DESCRIPTION_DEVICE_ME0960			"ME-96 device, 8 digital input lines, 8 digital output lines, 2 external interrupt lines."
-
-/* ME-DUMMY defines */
-#define MEDUMMY_NAME_DRIVER							"ME-Dummy"
-
-/* MEPHISTO_S1 defines */
-/*
-#define MEPHISTO_S1_NAME_DRIVER						"MEphisto Scope 1"
-#define MEPHISTO_S1_NAME_DEVICE						"MEphisto Scope 1"
-#define MEPHISTO_S1_DESCRIPTION_DEVICE				"MEphisto Scope 1 device, 2 analog inputs, 24 digital i/o."
-*/
-/* Error defines */
-#define EMPTY_NAME_DRIVER							"ME-???"
-#define EMPTY_NAME_DEVICE							"ME-???"
-#define EMPTY_DESCRIPTION_DEVICE					"ME-??? unknown device"
-
-#endif
diff --git a/drivers/staging/meilhaus/meioctl.h b/drivers/staging/meilhaus/meioctl.h
deleted file mode 100644
index 6dc719f..0000000
--- a/drivers/staging/meilhaus/meioctl.h
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : meioctl.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- */
-
-#ifndef _MEIOCTL_H_
-#define _MEIOCTL_H_
-
-
-/*=============================================================================
-  Types for the input/output ioctls
-  ===========================================================================*/
-
-typedef struct me_io_irq_start {
-	int device;
-	int subdevice;
-	int channel;
-	int irq_source;
-	int irq_edge;
-	int irq_arg;
-	int flags;
-	int errno;
-} me_io_irq_start_t;
-
-
-typedef struct me_io_irq_wait {
-	int device;
-	int subdevice;
-	int channel;
-	int irq_count;
-	int value;
-	int time_out;
-	int flags;
-	int errno;
-} me_io_irq_wait_t;
-
-
-typedef struct me_io_irq_stop {
-	int device;
-	int subdevice;
-	int channel;
-	int flags;
-	int errno;
-} me_io_irq_stop_t;
-
-
-typedef struct me_io_reset_device {
-	int device;
-	int flags;
-	int errno;
-} me_io_reset_device_t;
-
-
-typedef struct me_io_reset_subdevice {
-	int device;
-	int subdevice;
-	int flags;
-	int errno;
-} me_io_reset_subdevice_t;
-
-
-typedef struct me_io_single_config {
-	int device;
-	int subdevice;
-	int channel;
-	int single_config;
-	int ref;
-	int trig_chan;
-	int trig_type;
-	int trig_edge;
-	int flags;
-	int errno;
-} me_io_single_config_t;
-
-
-typedef struct me_io_single {
-	meIOSingle_t *single_list;
-	int count;
-	int flags;
-	int errno;
-} me_io_single_t;
-
-
-typedef struct me_io_stream_config {
-	int device;
-	int subdevice;
-	meIOStreamConfig_t *config_list;
-	int count;
-	meIOStreamTrigger_t trigger;
-	int fifo_irq_threshold;
-	int flags;
-	int errno;
-} me_io_stream_config_t;
-
-
-typedef struct me_io_stream_new_values {
-	int device;
-	int subdevice;
-	int time_out;
-	int count;
-	int flags;
-	int errno;
-} me_io_stream_new_values_t;
-
-
-typedef struct me_io_stream_read {
-	int device;
-	int subdevice;
-	int read_mode;
-	int *values;
-	int count;
-	int flags;
-	int errno;
-} me_io_stream_read_t;
-
-
-typedef struct me_io_stream_start {
-	meIOStreamStart_t *start_list;
-	int count;
-	int flags;
-	int errno;
-} me_io_stream_start_t;
-
-
-typedef struct me_io_stream_status {
-	int device;
-	int subdevice;
-	int wait;
-	int status;
-	int count;
-	int flags;
-	int errno;
-} me_io_stream_status_t;
-
-
-typedef struct me_io_stream_stop {
-	meIOStreamStop_t *stop_list;
-	int count;
-	int flags;
-	int errno;
-} me_io_stream_stop_t;
-
-
-typedef struct me_io_stream_write {
-	int device;
-	int subdevice;
-	int write_mode;
-	int *values;
-	int count;
-	int flags;
-	int errno;
-} me_io_stream_write_t;
-
-
-/*=============================================================================
-  Types for the lock ioctls
-  ===========================================================================*/
-
-typedef struct me_lock_device {
-	int device;
-	int lock;
-	int flags;
-	int errno;
-} me_lock_device_t;
-
-
-typedef struct me_lock_driver {
-	int flags;
-	int lock;
-	int errno;
-} me_lock_driver_t;
-
-
-typedef struct me_lock_subdevice {
-	int device;
-	int subdevice;
-	int lock;
-	int flags;
-	int errno;
-} me_lock_subdevice_t;
-
-
-/*=============================================================================
-  Types for the query ioctls
-  ===========================================================================*/
-
-typedef struct me_query_info_device {
-	int device;
-	int vendor_id;
-	int device_id;
-	int serial_no;
-	int bus_type;
-	int bus_no;
-	int dev_no;
-	int func_no;
-	int plugged;
-	int errno;
-} me_query_info_device_t;
-
-
-typedef struct me_query_description_device {
-	int device;
-	char *name;
-	int count;
-	int errno;
-} me_query_description_device_t;
-
-
-typedef struct me_query_name_device {
-	int device;
-	char *name;
-	int count;
-	int errno;
-} me_query_name_device_t;
-
-
-typedef struct me_query_name_device_driver {
-	int device;
-	char *name;
-	int count;
-	int errno;
-} me_query_name_device_driver_t;
-
-
-typedef struct me_query_version_main_driver {
-	int version;
-	int errno;
-} me_query_version_main_driver_t;
-
-
-typedef struct me_query_version_device_driver {
-	int device;
-	int version;
-	int errno;
-} me_query_version_device_driver_t;
-
-
-typedef struct me_query_number_devices {
-	int number;
-	int errno;
-} me_query_number_devices_t;
-
-
-typedef struct me_query_number_subdevices {
-	int device;
-	int number;
-	int errno;
-} me_query_number_subdevices_t;
-
-
-typedef struct me_query_number_channels {
-	int device;
-	int subdevice;
-	int number;
-	int errno;
-} me_query_number_channels_t;
-
-
-typedef struct me_query_number_ranges {
-	int device;
-	int subdevice;
-	int channel;
-	int unit;
-	int number;
-	int errno;
-} me_query_number_ranges_t;
-
-
-typedef struct me_query_subdevice_by_type {
-	int device;
-	int start_subdevice;
-	int type;
-	int subtype;
-	int subdevice;
-	int errno;
-} me_query_subdevice_by_type_t;
-
-
-typedef struct me_query_subdevice_type {
-	int device;
-	int subdevice;
-	int type;
-	int subtype;
-	int errno;
-} me_query_subdevice_type_t;
-
-
-typedef struct me_query_subdevice_caps {
-	int device;
-	int subdevice;
-	int caps;
-	int errno;
-} me_query_subdevice_caps_t;
-
-
-typedef struct me_query_subdevice_caps_args {
-	int device;
-	int subdevice;
-	int cap;
-	int args[8];
-	int count;
-	int errno;
-} me_query_subdevice_caps_args_t;
-
-
-typedef struct me_query_timer {
-	int device;
-	int subdevice;
-	int timer;
-	int base_frequency;
-	long long min_ticks;
-	long long max_ticks;
-	int errno;
-} me_query_timer_t;
-
-
-typedef struct me_query_range_by_min_max {
-	int device;
-	int subdevice;
-	int channel;
-	int unit;
-	int min;
-	int max;
-	int max_data;
-	int range;
-	int errno;
-} me_query_range_by_min_max_t;
-
-
-typedef struct me_query_range_info {
-	int device;
-	int subdevice;
-	int channel;
-	int unit;
-	int range;
-	int min;
-	int max;
-	int max_data;
-	int errno;
-} me_query_range_info_t;
-
-
-/*=============================================================================
-  Types for the configuration ioctls
-  ===========================================================================*/
-
-typedef struct me_cfg_tcpip_location {
-	int access_type;
-	char *remote_host;
-	int remote_device_number;
-} me_cfg_tcpip_location_t;
-
-
-typedef union me_cfg_tcpip {
-	int access_type;
-	me_cfg_tcpip_location_t location;
-} me_cfg_tcpip_t;
-
-
-typedef struct me_cfg_pci_hw_location {
-	unsigned int bus_type;
-	unsigned int bus_no;
-	unsigned int device_no;
-	unsigned int function_no;
-} me_cfg_pci_hw_location_t;
-
-/*
-typedef struct me_cfg_usb_hw_location {
-	unsigned int bus_type;
-	unsigned int root_hub_no;
-} me_cfg_usb_hw_location_t;
-*/
-
-typedef union me_cfg_hw_location {
-	unsigned int bus_type;
-	me_cfg_pci_hw_location_t pci;
-//	me_cfg_usb_hw_location_t usb;
-} me_cfg_hw_location_t;
-
-
-typedef struct me_cfg_device_info {
-	unsigned int vendor_id;
-	unsigned int device_id;
-	unsigned int serial_no;
-	me_cfg_hw_location_t hw_location;
-} me_cfg_device_info_t;
-
-
-typedef struct me_cfg_subdevice_info {
-	int type;
-	int sub_type;
-	unsigned int number_channels;
-} me_cfg_subdevice_info_t;
-
-
-typedef struct me_cfg_range_entry {
-	int unit;
-	double min;
-	double max;
-	unsigned int max_data;
-} me_cfg_range_entry_t;
-
-
-typedef struct me_cfg_mux32m_device {
-	int type;
-	int timed;
-	unsigned int ai_channel;
-	unsigned int dio_device;
-	unsigned int dio_subdevice;
-	unsigned int timer_device;
-	unsigned int timer_subdevice;
-	unsigned int mux32s_count;
-} me_cfg_mux32m_device_t;
-
-
-typedef struct me_cfg_demux32_device {
-	int type;
-	int timed;
-	unsigned int ao_channel;
-	unsigned int dio_device;
-	unsigned int dio_subdevice;
-	unsigned int timer_device;
-	unsigned int timer_subdevice;
-} me_cfg_demux32_device_t;
-
-
-typedef union me_cfg_external_device {
-	int type;
-	me_cfg_mux32m_device_t mux32m;
-	me_cfg_demux32_device_t demux32;
-} me_cfg_external_device_t;
-
-
-typedef struct me_cfg_subdevice_entry {
-	me_cfg_subdevice_info_t info;
-	me_cfg_range_entry_t *range_list;
-	unsigned int count;
-	int locked;
-	me_cfg_external_device_t external_device;
-} me_cfg_subdevice_entry_t;
-
-
-typedef struct me_cfg_device_entry {
-	me_cfg_tcpip_t tcpip;
-	me_cfg_device_info_t info;
-	me_cfg_subdevice_entry_t *subdevice_list;
-	unsigned int count;
-} me_cfg_device_entry_t;
-
-
-typedef struct me_config_load {
-	me_cfg_device_entry_t *device_list;
-	unsigned int count;
-	int errno;
-} me_config_load_t;
-
-
-/*=============================================================================
-  The ioctls of the board
-  ===========================================================================*/
-
-#define MEMAIN_MAGIC 'y'
-
-#define ME_IO_IRQ_ENABLE				_IOR (MEMAIN_MAGIC, 1, me_io_irq_start_t)
-#define ME_IO_IRQ_WAIT					_IOR (MEMAIN_MAGIC, 2, me_io_irq_wait_t)
-#define ME_IO_IRQ_DISABLE				_IOR (MEMAIN_MAGIC, 3, me_io_irq_stop_t)
-
-#define ME_IO_RESET_DEVICE				_IOW (MEMAIN_MAGIC, 4, me_io_reset_device_t)
-#define ME_IO_RESET_SUBDEVICE			_IOW (MEMAIN_MAGIC, 5, me_io_reset_subdevice_t)
-
-#define ME_IO_SINGLE					_IOWR(MEMAIN_MAGIC, 6, me_io_single_t)
-#define ME_IO_SINGLE_CONFIG				_IOW (MEMAIN_MAGIC, 7, me_io_single_config_t)
-
-#define ME_IO_STREAM_CONFIG				_IOW (MEMAIN_MAGIC, 8, me_io_stream_config_t)
-#define ME_IO_STREAM_NEW_VALUES			_IOR (MEMAIN_MAGIC, 9, me_io_stream_new_values_t)
-#define ME_IO_STREAM_READ				_IOR (MEMAIN_MAGIC, 10, me_io_stream_read_t)
-#define ME_IO_STREAM_START				_IOW (MEMAIN_MAGIC, 11, me_io_stream_start_t)
-#define ME_IO_STREAM_STATUS				_IOR (MEMAIN_MAGIC, 12, me_io_stream_status_t)
-#define ME_IO_STREAM_STOP				_IOW (MEMAIN_MAGIC, 13, me_io_stream_stop_t)
-#define ME_IO_STREAM_WRITE				_IOW (MEMAIN_MAGIC, 14, me_io_stream_write_t)
-
-#define ME_LOCK_DRIVER					_IOW (MEMAIN_MAGIC, 15, me_lock_driver_t)
-#define ME_LOCK_DEVICE					_IOW (MEMAIN_MAGIC, 16, me_lock_device_t)
-#define ME_LOCK_SUBDEVICE				_IOW (MEMAIN_MAGIC, 17, me_lock_subdevice_t)
-
-#define ME_QUERY_DESCRIPTION_DEVICE		_IOR (MEMAIN_MAGIC, 18, me_query_description_device_t)
-
-#define ME_QUERY_INFO_DEVICE			_IOR (MEMAIN_MAGIC, 19, me_query_info_device_t)
-
-#define ME_QUERY_NAME_DEVICE			_IOR (MEMAIN_MAGIC, 20, me_query_name_device_t)
-#define ME_QUERY_NAME_DEVICE_DRIVER		_IOR (MEMAIN_MAGIC, 21, me_query_name_device_driver_t)
-
-#define ME_QUERY_NUMBER_DEVICES			_IOR (MEMAIN_MAGIC, 22, me_query_number_devices_t)
-#define ME_QUERY_NUMBER_SUBDEVICES		_IOR (MEMAIN_MAGIC, 23, me_query_number_subdevices_t)
-#define ME_QUERY_NUMBER_CHANNELS		_IOR (MEMAIN_MAGIC, 24, me_query_number_channels_t)
-#define ME_QUERY_NUMBER_RANGES			_IOR (MEMAIN_MAGIC, 25, me_query_number_ranges_t)
-
-#define ME_QUERY_RANGE_BY_MIN_MAX		_IOR (MEMAIN_MAGIC, 26, me_query_range_by_min_max_t)
-#define ME_QUERY_RANGE_INFO				_IOR (MEMAIN_MAGIC, 27, me_query_range_info_t)
-
-#define ME_QUERY_SUBDEVICE_BY_TYPE		_IOR (MEMAIN_MAGIC, 28, me_query_subdevice_by_type_t)
-#define ME_QUERY_SUBDEVICE_TYPE			_IOR (MEMAIN_MAGIC, 29, me_query_subdevice_type_t)
-#define ME_QUERY_SUBDEVICE_CAPS			_IOR (MEMAIN_MAGIC, 29, me_query_subdevice_caps_t)
-#define ME_QUERY_SUBDEVICE_CAPS_ARGS	_IOR (MEMAIN_MAGIC, 30, me_query_subdevice_caps_args_t)
-
-#define ME_QUERY_TIMER					_IOR (MEMAIN_MAGIC, 31, me_query_timer_t)
-
-#define ME_QUERY_VERSION_DEVICE_DRIVER	_IOR (MEMAIN_MAGIC, 32, me_query_version_device_driver_t)
-#define ME_QUERY_VERSION_MAIN_DRIVER	_IOR (MEMAIN_MAGIC, 33, me_query_version_main_driver_t)
-
-#define ME_CONFIG_LOAD					_IOWR(MEMAIN_MAGIC, 34, me_config_load_t)
-
-#endif
diff --git a/drivers/staging/meilhaus/memain.c b/drivers/staging/meilhaus/memain.c
deleted file mode 100644
index c490854..0000000
--- a/drivers/staging/meilhaus/memain.c
+++ /dev/null
@@ -1,2084 +0,0 @@
-/**
- * @file memain.c
- *
- * @brief Main Meilhaus device driver.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- * @author Krzysztof Gantzke	(k.gantzke@xxxxxxxxxxx)
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-#include <linux/pci.h>
-//#include <linux/usb.h>
-#include <linux/errno.h>
-#include <linux/uaccess.h>
-#include <linux/miscdevice.h>
-#include <linux/rwsem.h>
-
-#include "medefines.h"
-#include "metypes.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "memain.h"
-#include "medevice.h"
-#include "meioctl.h"
-#include "mecommon.h"
-
-/* Module parameters
-*/
-
-#ifdef BOSCH
-static unsigned int me_bosch_fw = 0;
-EXPORT_SYMBOL(me_bosch_fw);
-
-# ifdef module_param
-module_param(me_bosch_fw, int, S_IRUGO);
-# else
-MODULE_PARM(me_bosch_fw, "i");
-# endif
-
-MODULE_PARM_DESC(me_bosch_fw,
-		 "Flags which signals the ME-4600 driver to load the bosch firmware (default = 0).");
-#endif //BOSCH
-
-/* Global Driver Lock
-*/
-
-static struct file *me_filep = NULL;
-static int me_count = 0;
-static DEFINE_SPINLOCK(me_lock);
-static DECLARE_RWSEM(me_rwsem);
-
-/* Board instances are kept in a global list */
-LIST_HEAD(me_device_list);
-
-/* Prototypes
-*/
-
-static int me_probe_pci(struct pci_dev *dev, const struct pci_device_id *id);
-static void me_remove_pci(struct pci_dev *dev);
-static int insert_to_device_list(me_device_t *n_device);
-static int replace_with_dummy(int vendor_id, int device_id, int serial_no);
-static void clear_device_list(void);
-static int me_open(struct inode *inode_ptr, struct file *filep);
-static int me_release(struct inode *, struct file *);
-static int me_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-//static int me_probe_usb(struct usb_interface *interface, const struct usb_device_id *id);
-//static void me_disconnect_usb(struct usb_interface *interface);
-
-/* File operations provided by the module
-*/
-
-static const struct file_operations me_file_operations = {
-	.owner = THIS_MODULE,
-	.ioctl = me_ioctl,
-	.open = me_open,
-	.release = me_release,
-};
-
-static const struct pci_device_id me_pci_table[] = {
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000_A) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1000_B) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1400) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140A) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140B) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14E0) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14EA) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME14EB) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140C) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME140D) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_4U) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_8U) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_12U) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_16U) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME1600_16U_8I) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4610) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4650) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4660) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4660I) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670I) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670S) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4670IS) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680I) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680S) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME4680IS) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6004) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6008) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME600F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6014) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6018) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME601F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6034) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6038) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME603F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6104) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6108) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME610F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6114) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6118) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME611F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6134) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6138) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME613F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6044) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6048) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME604F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6054) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6058) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME605F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6074) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6078) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME607F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6144) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6148) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME614F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6154) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6158) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME615F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6174) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6178) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME617F) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6259) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME6359) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0630) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8100_A) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8100_B) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8200_A) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME8200_B) },
-
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0940) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0950) },
-	{ PCI_VDEVICE(MEILHAUS, PCI_DEVICE_ID_MEILHAUS_ME0960) },
-
-	{ }
-};
-MODULE_DEVICE_TABLE(pci, me_pci_table);
-
-static struct pci_driver me_pci_driver = {
-	.name = MEMAIN_NAME,
-	.id_table = me_pci_table,
-	.probe = me_probe_pci,
-	.remove = __devexit_p(me_remove_pci),
-};
-
-/*
-static struct usb_device_id me_usb_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_MEPHISTO_S1, USB_DEVICE_ID_MEPHISTO_S1) },
-	{ 0 }
-};
-MODULE_DEVICE_TABLE (usb, me_usb_table);
-
-static struct usb_driver me_usb_driver =
-{
-	.name = MEMAIN_NAME,
-	.id_table = me_usb_table,
-	.probe = me_probe_usb,
-	.disconnect = me_disconnect_usb
-};
-*/
-
-#ifdef ME_LOCK_MULTIPLEX_TEMPLATE
-ME_LOCK_MULTIPLEX_TEMPLATE("me_lock_device",
-			   me_lock_device_t,
-			   me_lock_device,
-			   me_device_lock_device,
-			   (device, filep, karg.lock, karg.flags))
-
-    ME_LOCK_MULTIPLEX_TEMPLATE("me_lock_subdevice",
-			   me_lock_subdevice_t,
-			   me_lock_subdevice,
-			   me_device_lock_subdevice,
-			   (device, filep, karg.subdevice, karg.lock,
-			karg.flags))
-#else
-#error macro ME_LOCK_MULTIPLEX_TEMPLATE not defined
-#endif
-
-#ifdef ME_IO_MULTIPLEX_TEMPLATE
-ME_IO_MULTIPLEX_TEMPLATE("me_io_irq_start",
-			 me_io_irq_start_t,
-			 me_io_irq_start,
-			 me_device_io_irq_start,
-			 (device,
-			  filep,
-			  karg.subdevice,
-			  karg.channel,
-			  karg.irq_source,
-			  karg.irq_edge, karg.irq_arg, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_irq_wait",
-			 me_io_irq_wait_t,
-			 me_io_irq_wait,
-			 me_device_io_irq_wait,
-			 (device,
-		      filep,
-		      karg.subdevice,
-		      karg.channel,
-		      &karg.irq_count, &karg.value, karg.time_out, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_irq_stop",
-			 me_io_irq_stop_t,
-			 me_io_irq_stop,
-			 me_device_io_irq_stop,
-			 (device,
-		      filep, karg.subdevice, karg.channel, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_reset_device",
-			 me_io_reset_device_t,
-			 me_io_reset_device,
-			 me_device_io_reset_device, (device, filep, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_reset_subdevice",
-			 me_io_reset_subdevice_t,
-			 me_io_reset_subdevice,
-			 me_device_io_reset_subdevice,
-			 (device, filep, karg.subdevice, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_single_config",
-			 me_io_single_config_t,
-			 me_io_single_config,
-			 me_device_io_single_config,
-			 (device,
-		      filep,
-		      karg.subdevice,
-		      karg.channel,
-		      karg.single_config,
-		      karg.ref,
-		      karg.trig_chan,
-		      karg.trig_type, karg.trig_edge, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_stream_new_values",
-			 me_io_stream_new_values_t,
-			 me_io_stream_new_values,
-			 me_device_io_stream_new_values,
-			 (device,
-		      filep,
-		      karg.subdevice, karg.time_out, &karg.count, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_stream_read",
-			 me_io_stream_read_t,
-			 me_io_stream_read,
-			 me_device_io_stream_read,
-			 (device,
-		      filep,
-		      karg.subdevice,
-		      karg.read_mode, karg.values, &karg.count, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_stream_status",
-			 me_io_stream_status_t,
-			 me_io_stream_status,
-			 me_device_io_stream_status,
-			 (device,
-		      filep,
-		      karg.subdevice,
-		      karg.wait, &karg.status, &karg.count, karg.flags))
-
-    ME_IO_MULTIPLEX_TEMPLATE("me_io_stream_write",
-			 me_io_stream_write_t,
-			 me_io_stream_write,
-			 me_device_io_stream_write,
-			 (device,
-		      filep,
-		      karg.subdevice,
-		      karg.write_mode, karg.values, &karg.count, karg.flags))
-#else
-#error macro ME_IO_MULTIPLEX_TEMPLATE not defined
-#endif
-
-#ifdef ME_QUERY_MULTIPLEX_STR_TEMPLATE
-ME_QUERY_MULTIPLEX_STR_TEMPLATE("me_query_name_device",
-				me_query_name_device_t,
-				me_query_name_device,
-				me_device_query_name_device, (device, &msg))
-
-    ME_QUERY_MULTIPLEX_STR_TEMPLATE("me_query_name_device_driver",
-				me_query_name_device_driver_t,
-				me_query_name_device_driver,
-				me_device_query_name_device_driver,
-				(device, &msg))
-
-    ME_QUERY_MULTIPLEX_STR_TEMPLATE("me_query_description_device",
-				me_query_description_device_t,
-				me_query_description_device,
-				me_device_query_description_device,
-				(device, &msg))
-#else
-#error macro ME_QUERY_MULTIPLEX_STR_TEMPLATE not defined
-#endif
-
-#ifdef ME_QUERY_MULTIPLEX_TEMPLATE
-ME_QUERY_MULTIPLEX_TEMPLATE("me_query_info_device",
-			    me_query_info_device_t,
-			    me_query_info_device,
-			    me_device_query_info_device,
-			    (device,
-			     &karg.vendor_id,
-			     &karg.device_id,
-			     &karg.serial_no,
-			     &karg.bus_type,
-			     &karg.bus_no,
-			     &karg.dev_no, &karg.func_no, &karg.plugged))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_number_subdevices",
-			    me_query_number_subdevices_t,
-			    me_query_number_subdevices,
-			    me_device_query_number_subdevices,
-			    (device, &karg.number))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_number_channels",
-			    me_query_number_channels_t,
-			    me_query_number_channels,
-			    me_device_query_number_channels,
-			    (device, karg.subdevice, &karg.number))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_subdevice_by_type",
-			    me_query_subdevice_by_type_t,
-			    me_query_subdevice_by_type,
-			    me_device_query_subdevice_by_type,
-			    (device,
-			 karg.start_subdevice,
-			 karg.type, karg.subtype, &karg.subdevice))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_subdevice_type",
-			    me_query_subdevice_type_t,
-			    me_query_subdevice_type,
-			    me_device_query_subdevice_type,
-			    (device, karg.subdevice, &karg.type, &karg.subtype))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_subdevice_caps",
-			    me_query_subdevice_caps_t,
-			    me_query_subdevice_caps,
-			    me_device_query_subdevice_caps,
-			    (device, karg.subdevice, &karg.caps))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_subdevice_caps_args",
-			    me_query_subdevice_caps_args_t,
-			    me_query_subdevice_caps_args,
-			    me_device_query_subdevice_caps_args,
-			    (device, karg.subdevice, karg.cap, karg.args,
-			 karg.count))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_number_ranges",
-			    me_query_number_ranges_t,
-			    me_query_number_ranges,
-			    me_device_query_number_ranges,
-			    (device, karg.subdevice, karg.unit, &karg.number))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_range_by_min_max",
-			    me_query_range_by_min_max_t,
-			    me_query_range_by_min_max,
-			    me_device_query_range_by_min_max,
-			    (device,
-			 karg.subdevice,
-			 karg.unit,
-			 &karg.min, &karg.max, &karg.max_data, &karg.range))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_range_info",
-			    me_query_range_info_t,
-			    me_query_range_info,
-			    me_device_query_range_info,
-			    (device,
-			 karg.subdevice,
-			 karg.range,
-			 &karg.unit, &karg.min, &karg.max, &karg.max_data))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_timer",
-			    me_query_timer_t,
-			    me_query_timer,
-			    me_device_query_timer,
-			    (device,
-			 karg.subdevice,
-			 karg.timer,
-			 &karg.base_frequency,
-			 &karg.min_ticks, &karg.max_ticks))
-
-    ME_QUERY_MULTIPLEX_TEMPLATE("me_query_version_device_driver",
-			    me_query_version_device_driver_t,
-			    me_query_version_device_driver,
-			    me_device_query_version_device_driver,
-			    (device, &karg.version))
-#else
-#error macro ME_QUERY_MULTIPLEX_TEMPLATE not defined
-#endif
-
-/** ******************************************************************************** **/
-
-static me_device_t *get_dummy_instance(unsigned short vendor_id,
-				       unsigned short device_id,
-				       unsigned int serial_no,
-				       int bus_type,
-				       int bus_no, int dev_no, int func_no)
-{
-	int err;
-	me_dummy_constructor_t constructor = NULL;
-	me_device_t *instance;
-
-	PDEBUG("executed.\n");
-
-	if ((constructor = symbol_get(medummy_constructor)) == NULL) {
-		err = request_module(MEDUMMY_NAME);
-
-		if (err) {
-			PERROR("Error while request for module %s.\n",
-			       MEDUMMY_NAME);
-			return NULL;
-		}
-
-		if ((constructor = symbol_get(medummy_constructor)) == NULL) {
-			PERROR("Can't get %s driver module constructor.\n",
-			       MEDUMMY_NAME);
-			return NULL;
-		}
-	}
-
-	if ((instance = (*constructor) (vendor_id,
-					device_id,
-					serial_no,
-					bus_type,
-					bus_no, dev_no, func_no)) == NULL)
-		symbol_put(medummy_constructor);
-
-	return instance;
-}
-
-static int __devinit me_probe_pci(struct pci_dev *dev,
-		const struct pci_device_id *id)
-{
-	int err;
-	me_pci_constructor_t constructor = NULL;
-#ifdef BOSCH
-	me_bosch_constructor_t constructor_bosch = NULL;
-#endif
-	me_device_t *n_device = NULL;
-	uint32_t device;
-
-	char constructor_name[24] = "me0000_pci_constructor";
-	char module_name[7] = "me0000";
-
-	PDEBUG("executed.\n");
-	device = dev->device;
-	if ((device & 0xF000) == 0x6000) {	// Exceptions: me61xx, me62xx, me63xx are handled by one driver.
-		device &= 0xF0FF;
-	}
-
-	constructor_name[2] += (char)((device >> 12) & 0x000F);
-	constructor_name[3] += (char)((device >> 8) & 0x000F);
-	PDEBUG("constructor_name: %s\n", constructor_name);
-	module_name[2] += (char)((device >> 12) & 0x000F);
-	module_name[3] += (char)((device >> 8) & 0x000F);
-	PDEBUG("module_name: %s\n", module_name);
-
-	if ((constructor =
-	     (me_pci_constructor_t) symbol_get(constructor_name)) == NULL) {
-		if (request_module("%s", module_name)) {
-			PERROR("Error while request for module %s.\n",
-			       module_name);
-			return -ENODEV;
-		}
-
-		if ((constructor =
-		     (me_pci_constructor_t) symbol_get(constructor_name)) ==
-		    NULL) {
-			PERROR("Can't get %s driver module constructor.\n",
-			       module_name);
-			return -ENODEV;
-		}
-	}
-#ifdef BOSCH
-	if ((device & 0xF000) == 0x4000) {	// Bosch build has differnt constructor for me4600.
-		if ((n_device =
-		     (*constructor_bosch) (dev, me_bosch_fw)) == NULL) {
-			symbol_put(constructor_name);
-			PERROR
-			    ("Can't get device instance of %s driver module.\n",
-			     module_name);
-			return -ENODEV;
-		}
-	} else {
-#endif
-		if ((n_device = (*constructor) (dev)) == NULL) {
-			symbol_put(constructor_name);
-			PERROR
-			    ("Can't get device instance of %s driver module.\n",
-			     module_name);
-			return -ENODEV;
-		}
-#ifdef BOSCH
-	}
-#endif
-
-	insert_to_device_list(n_device);
-	err =
-	    n_device->me_device_io_reset_device(n_device, NULL,
-						ME_IO_RESET_DEVICE_NO_FLAGS);
-	if (err) {
-		PERROR("Error while reseting device.\n");
-	} else {
-		PDEBUG("Reseting device was sucessful.\n");
-	}
-	return ME_ERRNO_SUCCESS;
-}
-
-static void release_instance(me_device_t *device)
-{
-	int vendor_id;
-	int device_id;
-	int serial_no;
-	int bus_type;
-	int bus_no;
-	int dev_no;
-	int func_no;
-	int plugged;
-
-	uint32_t dev_id;
-
-	char constructor_name[24] = "me0000_pci_constructor";
-
-	PDEBUG("executed.\n");
-
-	device->me_device_query_info_device(device,
-					    &vendor_id,
-					    &device_id,
-					    &serial_no,
-					    &bus_type,
-					    &bus_no,
-					    &dev_no, &func_no, &plugged);
-
-	dev_id = device_id;
-	device->me_device_destructor(device);
-
-	if (plugged != ME_PLUGGED_IN) {
-		PDEBUG("release: medummy_constructor\n");
-
-		symbol_put("medummy_constructor");
-	} else {
-		if ((dev_id & 0xF000) == 0x6000) {	// Exceptions: me61xx, me62xx, me63xx are handled by one driver.
-			dev_id &= 0xF0FF;
-		}
-
-		constructor_name[2] += (char)((dev_id >> 12) & 0x000F);
-		constructor_name[3] += (char)((dev_id >> 8) & 0x000F);
-		PDEBUG("release: %s\n", constructor_name);
-
-		symbol_put(constructor_name);
-	}
-}
-
-static int insert_to_device_list(me_device_t *n_device)
-{
-	me_device_t *o_device = NULL;
-
-	struct list_head *pos;
-	int n_vendor_id;
-	int n_device_id;
-	int n_serial_no;
-	int n_bus_type;
-	int n_bus_no;
-	int n_dev_no;
-	int n_func_no;
-	int n_plugged;
-	int o_vendor_id;
-	int o_device_id;
-	int o_serial_no;
-	int o_bus_type;
-	int o_bus_no;
-	int o_dev_no;
-	int o_func_no;
-	int o_plugged;
-
-	PDEBUG("executed.\n");
-
-	n_device->me_device_query_info_device(n_device,
-					      &n_vendor_id,
-					      &n_device_id,
-					      &n_serial_no,
-					      &n_bus_type,
-					      &n_bus_no,
-					      &n_dev_no,
-					      &n_func_no, &n_plugged);
-
-	down_write(&me_rwsem);
-
-	list_for_each(pos, &me_device_list) {
-		o_device = list_entry(pos, me_device_t, list);
-		o_device->me_device_query_info_device(o_device,
-						      &o_vendor_id,
-						      &o_device_id,
-						      &o_serial_no,
-						      &o_bus_type,
-						      &o_bus_no,
-						      &o_dev_no,
-						      &o_func_no, &o_plugged);
-
-		if (o_plugged == ME_PLUGGED_OUT) {
-			if (((o_vendor_id == n_vendor_id) &&
-			     (o_device_id == n_device_id) &&
-			     (o_serial_no == n_serial_no) &&
-			     (o_bus_type == n_bus_type)) ||
-			    ((o_vendor_id == n_vendor_id) &&
-			     (o_device_id == n_device_id) &&
-			     (o_bus_type == n_bus_type) &&
-			     (o_bus_no == n_bus_no) &&
-			     (o_dev_no == n_dev_no) &&
-			     (o_func_no == n_func_no))) {
-				n_device->list.prev = pos->prev;
-				n_device->list.next = pos->next;
-				pos->prev->next = &n_device->list;
-				pos->next->prev = &n_device->list;
-				release_instance(o_device);
-				break;
-			}
-		}
-	}
-
-	if (pos == &me_device_list) {
-		list_add_tail(&n_device->list, &me_device_list);
-	}
-
-	up_write(&me_rwsem);
-
-	return 0;
-}
-
-static void __devexit me_remove_pci(struct pci_dev *dev)
-{
-	int vendor_id = dev->vendor;
-	int device_id = dev->device;
-	int subsystem_vendor = dev->subsystem_vendor;
-	int subsystem_device = dev->subsystem_device;
-	int serial_no = (subsystem_device << 16) | subsystem_vendor;
-
-	PDEBUG("executed.\n");
-
-	PINFO("Vendor id = 0x%08X\n", vendor_id);
-	PINFO("Device id = 0x%08X\n", device_id);
-	PINFO("Serial Number = 0x%08X\n", serial_no);
-
-	replace_with_dummy(vendor_id, device_id, serial_no);
-}
-
-static int replace_with_dummy(int vendor_id, int device_id, int serial_no)
-{
-
-	struct list_head *pos;
-	me_device_t *n_device = NULL;
-	me_device_t *o_device = NULL;
-	int o_vendor_id;
-	int o_device_id;
-	int o_serial_no;
-	int o_bus_type;
-	int o_bus_no;
-	int o_dev_no;
-	int o_func_no;
-	int o_plugged;
-
-	PDEBUG("executed.\n");
-
-	down_write(&me_rwsem);
-
-	list_for_each(pos, &me_device_list) {
-		o_device = list_entry(pos, me_device_t, list);
-		o_device->me_device_query_info_device(o_device,
-						      &o_vendor_id,
-						      &o_device_id,
-						      &o_serial_no,
-						      &o_bus_type,
-						      &o_bus_no,
-						      &o_dev_no,
-						      &o_func_no, &o_plugged);
-
-		if (o_plugged == ME_PLUGGED_IN) {
-			if (((o_vendor_id == vendor_id) &&
-			     (o_device_id == device_id) &&
-			     (o_serial_no == serial_no))) {
-				n_device = get_dummy_instance(o_vendor_id,
-							      o_device_id,
-							      o_serial_no,
-							      o_bus_type,
-							      o_bus_no,
-							      o_dev_no,
-							      o_func_no);
-
-				if (!n_device) {
-					up_write(&me_rwsem);
-					PERROR("Cannot get dummy instance.\n");
-					return 1;
-				}
-
-				n_device->list.prev = pos->prev;
-
-				n_device->list.next = pos->next;
-				pos->prev->next = &n_device->list;
-				pos->next->prev = &n_device->list;
-				release_instance(o_device);
-				break;
-			}
-		}
-	}
-
-	up_write(&me_rwsem);
-
-	return 0;
-}
-
-static void clear_device_list(void)
-{
-
-	struct list_head *entry;
-	me_device_t *device;
-
-	// Clear the device info list .
-	down_write(&me_rwsem);
-
-	while (!list_empty(&me_device_list)) {
-		entry = me_device_list.next;
-		device = list_entry(entry, me_device_t, list);
-		list_del(entry);
-		release_instance(device);
-	}
-
-	up_write(&me_rwsem);
-}
-
-static int lock_driver(struct file *filep, int lock, int flags)
-{
-	int err = ME_ERRNO_SUCCESS;
-	me_device_t *device;
-
-	PDEBUG("executed.\n");
-
-	down_read(&me_rwsem);
-
-	spin_lock(&me_lock);
-
-	switch (lock) {
-
-	case ME_LOCK_SET:
-		if (me_count) {
-			PERROR
-			    ("Driver System is currently used by another process.\n");
-			err = ME_ERRNO_USED;
-		} else if ((me_filep != NULL) && (me_filep != filep)) {
-			PERROR
-			    ("Driver System is already logged by another process.\n");
-			err = ME_ERRNO_LOCKED;
-		} else {
-			list_for_each_entry(device, &me_device_list, list) {
-				err =
-				    device->me_device_lock_device(device, filep,
-								  ME_LOCK_CHECK,
-								  flags);
-
-				if (err)
-					break;
-			}
-
-			if (!err)
-				me_filep = filep;
-		}
-
-		break;
-
-	case ME_LOCK_RELEASE:
-		if ((me_filep != NULL) && (me_filep != filep)) {
-			err = ME_ERRNO_SUCCESS;
-		} else {
-			list_for_each_entry(device, &me_device_list, list) {
-				device->me_device_lock_device(device, filep,
-							      ME_LOCK_RELEASE,
-							      flags);
-			}
-
-			me_filep = NULL;
-		}
-
-		break;
-
-	default:
-		PERROR("Invalid lock specified.\n");
-
-		err = ME_ERRNO_INVALID_LOCK;
-
-		break;
-	}
-
-	spin_unlock(&me_lock);
-
-	up_read(&me_rwsem);
-
-	return err;
-}
-
-static int me_lock_driver(struct file *filep, me_lock_driver_t *arg)
-{
-	int err = 0;
-
-	me_lock_driver_t lock;
-
-	PDEBUG("executed.\n");
-
-	err = copy_from_user(&lock, arg, sizeof(me_lock_driver_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to kernel space.\n");
-		return -EFAULT;
-	}
-
-	lock.errno = lock_driver(filep, lock.lock, lock.flags);
-
-	err = copy_to_user(arg, &lock, sizeof(me_lock_driver_t));
-
-	if (err) {
-		PERROR("Can't copy query back to user space.\n");
-		return -EFAULT;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me_open(struct inode *inode_ptr, struct file *filep)
-{
-
-	PDEBUG("executed.\n");
-	// Nothing to do here.
-	return 0;
-}
-
-static int me_release(struct inode *inode_ptr, struct file *filep)
-{
-
-	PDEBUG("executed.\n");
-	lock_driver(filep, ME_LOCK_RELEASE, ME_LOCK_DRIVER_NO_FLAGS);
-
-	return 0;
-}
-
-static int me_query_version_main_driver(struct file *filep,
-					me_query_version_main_driver_t *arg)
-{
-	int err;
-	me_query_version_main_driver_t karg;
-
-	PDEBUG("executed.\n");
-
-	karg.version = ME_VERSION_DRIVER;
-	karg.errno = ME_ERRNO_SUCCESS;
-
-	err = copy_to_user(arg, &karg, sizeof(me_query_version_main_driver_t));
-
-	if (err) {
-		PERROR("Can't copy query back to user space.\n");
-		return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int me_config_load_device(struct file *filep,
-				 me_cfg_device_entry_t *karg, int device_no)
-{
-
-	int err = ME_ERRNO_SUCCESS;
-	int k = 0;
-
-	struct list_head *pos = NULL;
-	me_device_t *device = NULL;
-
-	PDEBUG("executed.\n");
-
-	list_for_each(pos, &me_device_list) {
-		if (k == device_no) {
-			device = list_entry(pos, me_device_t, list);
-			break;
-		}
-
-		k++;
-	}
-
-	if (pos == &me_device_list) {
-		PERROR("Invalid device number specified.\n");
-		return ME_ERRNO_INVALID_DEVICE;
-	} else {
-		spin_lock(&me_lock);
-
-		if ((me_filep != NULL) && (me_filep != filep)) {
-			spin_unlock(&me_lock);
-			PERROR("Resource is locked by another process.\n");
-			return ME_ERRNO_LOCKED;
-		} else {
-			me_count++;
-			spin_unlock(&me_lock);
-
-			err =
-			    device->me_device_config_load(device, filep, karg);
-
-			spin_lock(&me_lock);
-			me_count--;
-			spin_unlock(&me_lock);
-		}
-	}
-
-	return err;
-}
-
-static int me_config_load(struct file *filep, me_config_load_t *arg)
-{
-	int err;
-	int i;
-	me_config_load_t cfg_setup;
-	me_config_load_t karg_cfg_setup;
-
-	struct list_head *pos = NULL;
-
-	struct list_head new_list;
-	me_device_t *o_device;
-	me_device_t *n_device;
-	int o_vendor_id;
-	int o_device_id;
-	int o_serial_no;
-	int o_bus_type;
-	int o_bus_no;
-	int o_dev_no;
-	int o_func_no;
-	int o_plugged;
-
-	PDEBUG("executed.\n");
-
-	// Copy argument to kernel space.
-	err = copy_from_user(&karg_cfg_setup, arg, sizeof(me_config_load_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to kernel space.\n");
-		return -EFAULT;
-	}
-	// Allocate kernel buffer for device list.
-	cfg_setup.device_list =
-	    kmalloc(sizeof(me_cfg_device_entry_t) * karg_cfg_setup.count,
-		    GFP_KERNEL);
-
-	if (!cfg_setup.device_list) {
-		PERROR("Can't get buffer %li for device list.\n",
-		       sizeof(me_cfg_device_entry_t) * karg_cfg_setup.count);
-		return -ENOMEM;
-	}
-	// Copy device list to kernel space.
-	err =
-	    copy_from_user(cfg_setup.device_list, karg_cfg_setup.device_list,
-			   sizeof(me_cfg_device_entry_t) *
-			   karg_cfg_setup.count);
-
-	if (err) {
-		PERROR("Can't copy device list to kernel space.\n");
-		kfree(cfg_setup.device_list);
-		return -EFAULT;
-	}
-
-	cfg_setup.count = karg_cfg_setup.count;
-
-	INIT_LIST_HEAD(&new_list);
-
-	down_write(&me_rwsem);
-
-	spin_lock(&me_lock);
-
-	if ((me_filep != NULL) && (me_filep != filep)) {
-		spin_unlock(&me_lock);
-		PERROR("Driver System is logged by another process.\n");
-		karg_cfg_setup.errno = ME_ERRNO_LOCKED;
-	} else {
-		me_count++;
-		spin_unlock(&me_lock);
-
-		for (i = 0; i < karg_cfg_setup.count; i++) {
-			PDEBUG("me_config_load() device=%d.\n", i);
-			if (cfg_setup.device_list[i].tcpip.access_type ==
-			    ME_ACCESS_TYPE_LOCAL) {
-				list_for_each(pos, &me_device_list) {
-					o_device =
-					    list_entry(pos, me_device_t, list);
-					o_device->
-					    me_device_query_info_device
-					    (o_device, &o_vendor_id,
-					     &o_device_id, &o_serial_no,
-					     &o_bus_type, &o_bus_no, &o_dev_no,
-					     &o_func_no, &o_plugged);
-
-					if (cfg_setup.device_list[i].info.
-					    hw_location.bus_type ==
-					    ME_BUS_TYPE_PCI) {
-						if (((o_vendor_id ==
-						      cfg_setup.device_list[i].
-						      info.vendor_id)
-						     && (o_device_id ==
-							 cfg_setup.
-							 device_list[i].info.
-							 device_id)
-						     && (o_serial_no ==
-							 cfg_setup.
-							 device_list[i].info.
-							 serial_no)
-						     && (o_bus_type ==
-							 cfg_setup.
-							 device_list[i].info.
-							 hw_location.bus_type))
-						    ||
-						    ((o_vendor_id ==
-						      cfg_setup.device_list[i].
-						      info.vendor_id)
-						     && (o_device_id ==
-							 cfg_setup.
-							 device_list[i].info.
-							 device_id)
-						     && (o_bus_type ==
-							 cfg_setup.
-							 device_list[i].info.
-							 hw_location.bus_type)
-						     && (o_bus_no ==
-							 cfg_setup.
-							 device_list[i].info.
-							 hw_location.pci.bus_no)
-						     && (o_dev_no ==
-							 cfg_setup.
-							 device_list[i].info.
-							 hw_location.pci.
-							 device_no)
-						     && (o_func_no ==
-							 cfg_setup.
-							 device_list[i].info.
-							 hw_location.pci.
-							 function_no))) {
-							list_move_tail(pos,
-								       &new_list);
-							break;
-						}
-					}
-/*
-					else if (cfg_setup.device_list[i].info.hw_location.bus_type == ME_BUS_TYPE_USB)
-					{
-						if (((o_vendor_id == cfg_setup.device_list[i].info.vendor_id) &&
-						        (o_device_id == cfg_setup.device_list[i].info.device_id) &&
-						        (o_serial_no == cfg_setup.device_list[i].info.serial_no) &&
-						        (o_bus_type == cfg_setup.device_list[i].info.hw_location.bus_type)) ||
-						        ((o_vendor_id == cfg_setup.device_list[i].info.vendor_id) &&
-						         (o_device_id == cfg_setup.device_list[i].info.device_id) &&
-						         (o_bus_type == cfg_setup.device_list[i].info.hw_location.bus_type) &&
-						         (o_bus_no == cfg_setup.device_list[i].info.hw_location.usb.root_hub_no)))
-						{
-							list_move_tail(pos, &new_list);
-							break;
-						}
-					}
-*/
-					else {
-						PERROR("Wrong bus type: %d.\n",
-						       cfg_setup.device_list[i].
-						       info.hw_location.
-						       bus_type);
-					}
-				}
-
-				if (pos == &me_device_list) {	// Device is not already in the list
-					if (cfg_setup.device_list[i].info.
-					    hw_location.bus_type ==
-					    ME_BUS_TYPE_PCI) {
-						n_device =
-						    get_dummy_instance
-						    (cfg_setup.device_list[i].
-						     info.vendor_id,
-						     cfg_setup.device_list[i].
-						     info.device_id,
-						     cfg_setup.device_list[i].
-						     info.serial_no,
-						     cfg_setup.device_list[i].
-						     info.hw_location.bus_type,
-						     cfg_setup.device_list[i].
-						     info.hw_location.pci.
-						     bus_no,
-						     cfg_setup.device_list[i].
-						     info.hw_location.pci.
-						     device_no,
-						     cfg_setup.device_list[i].
-						     info.hw_location.pci.
-						     function_no);
-
-						if (!n_device) {
-							PERROR
-							    ("Can't get dummy instance.\n");
-							kfree(cfg_setup.
-							      device_list);
-							spin_lock(&me_lock);
-							me_count--;
-							spin_unlock(&me_lock);
-							up_write(&me_rwsem);
-							return -EFAULT;
-						}
-
-						list_add_tail(&n_device->list,
-							      &new_list);
-					}
-/*
-					else if (cfg_setup.device_list[i].info.hw_location.bus_type == ME_BUS_TYPE_USB)
-					{
-						n_device = get_dummy_instance(
-						               cfg_setup.device_list[i].info.vendor_id,
-						               cfg_setup.device_list[i].info.device_id,
-						               cfg_setup.device_list[i].info.serial_no,
-						               cfg_setup.device_list[i].info.hw_location.bus_type,
-						               cfg_setup.device_list[i].info.hw_location.usb.root_hub_no,
-						               0,
-						               0);
-
-						if (!n_device)
-						{
-							PERROR("Can't get dummy instance.\n");
-							kfree(cfg_setup.device_list);
-							spin_lock(&me_lock);
-							me_count--;
-							spin_unlock(&me_lock);
-							up_write(&me_rwsem);
-							return -EFAULT;
-						}
-
-						list_add_tail(&n_device->list, &new_list);
-					}
-*/
-				}
-			} else {
-				n_device = get_dummy_instance(0,
-							      0, 0, 0, 0, 0, 0);
-
-				if (!n_device) {
-					PERROR("Can't get dummy instance.\n");
-					kfree(cfg_setup.device_list);
-					spin_lock(&me_lock);
-					me_count--;
-					spin_unlock(&me_lock);
-					up_write(&me_rwsem);
-					return -EFAULT;
-				}
-
-				list_add_tail(&n_device->list, &new_list);
-			}
-		}
-
-		while (!list_empty(&me_device_list)) {
-			o_device =
-			    list_entry(me_device_list.next, me_device_t, list);
-			o_device->me_device_query_info_device(o_device,
-							      &o_vendor_id,
-							      &o_device_id,
-							      &o_serial_no,
-							      &o_bus_type,
-							      &o_bus_no,
-							      &o_dev_no,
-							      &o_func_no,
-							      &o_plugged);
-
-			if (o_plugged == ME_PLUGGED_IN) {
-				list_move_tail(me_device_list.next, &new_list);
-			} else {
-				list_del(me_device_list.next);
-				release_instance(o_device);
-			}
-		}
-
-		// Move temporary new list to global driver list.
-		list_splice(&new_list, &me_device_list);
-
-		karg_cfg_setup.errno = ME_ERRNO_SUCCESS;
-	}
-
-	for (i = 0; i < cfg_setup.count; i++) {
-
-		karg_cfg_setup.errno =
-		    me_config_load_device(filep, &cfg_setup.device_list[i], i);
-		if (karg_cfg_setup.errno) {
-			PERROR("me_config_load_device(%d)=%d\n", i,
-			       karg_cfg_setup.errno);
-			break;
-		}
-	}
-
-	spin_lock(&me_lock);
-
-	me_count--;
-	spin_unlock(&me_lock);
-	up_write(&me_rwsem);
-
-	err = copy_to_user(arg, &karg_cfg_setup, sizeof(me_config_load_t));
-
-	if (err) {
-		PERROR("Can't copy config list to user space.\n");
-		kfree(cfg_setup.device_list);
-		return -EFAULT;
-	}
-
-	kfree(cfg_setup.device_list);
-	return 0;
-}
-
-static int me_io_stream_start(struct file *filep, me_io_stream_start_t *arg)
-{
-	int err;
-	int i, k;
-
-	struct list_head *pos;
-	me_device_t *device;
-	me_io_stream_start_t karg;
-	meIOStreamStart_t *list;
-
-	PDEBUG("executed.\n");
-
-	err = copy_from_user(&karg, arg, sizeof(me_io_stream_start_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to kernel space.\n");
-		return -EFAULT;
-	}
-
-	karg.errno = ME_ERRNO_SUCCESS;
-
-	list = kmalloc(sizeof(meIOStreamStart_t) * karg.count, GFP_KERNEL);
-
-	if (!list) {
-		PERROR("Can't get buffer for start list.\n");
-		return -ENOMEM;
-	}
-
-	err =
-	    copy_from_user(list, karg.start_list,
-			   sizeof(meIOStreamStart_t) * karg.count);
-
-	if (err) {
-		PERROR("Can't copy start list to kernel space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	spin_lock(&me_lock);
-
-	if ((me_filep != NULL) && (me_filep != filep)) {
-		spin_unlock(&me_lock);
-		PERROR("Driver System is logged by another process.\n");
-
-		for (i = 0; i < karg.count; i++) {
-			list[i].iErrno = ME_ERRNO_LOCKED;
-		}
-	} else {
-		me_count++;
-		spin_unlock(&me_lock);
-
-		for (i = 0; i < karg.count; i++) {
-			down_read(&me_rwsem);
-			k = 0;
-			list_for_each(pos, &me_device_list) {
-				if (k == list[i].iDevice) {
-					device =
-					    list_entry(pos, me_device_t, list);
-					break;
-				}
-
-				k++;
-			}
-
-			if (pos == &me_device_list) {
-				up_read(&me_rwsem);
-				PERROR("Invalid device number specified.\n");
-				list[i].iErrno = ME_ERRNO_INVALID_DEVICE;
-				karg.errno = ME_ERRNO_INVALID_DEVICE;
-				break;
-			} else {
-				list[i].iErrno =
-				    device->me_device_io_stream_start(device,
-								      filep,
-								      list[i].
-								      iSubdevice,
-								      list[i].
-								      iStartMode,
-								      list[i].
-								      iTimeOut,
-								      list[i].
-								      iFlags);
-
-				if (list[i].iErrno) {
-					up_read(&me_rwsem);
-					karg.errno = list[i].iErrno;
-					break;
-				}
-			}
-
-			up_read(&me_rwsem);
-		}
-
-		spin_lock(&me_lock);
-
-		me_count--;
-		spin_unlock(&me_lock);
-	}
-
-	err = copy_to_user(arg, &karg, sizeof(me_io_stream_start_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to user space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	err =
-	    copy_to_user(karg.start_list, list,
-			 sizeof(meIOStreamStart_t) * karg.count);
-
-	if (err) {
-		PERROR("Can't copy start list to user space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	kfree(list);
-
-	return err;
-}
-
-static int me_io_single(struct file *filep, me_io_single_t *arg)
-{
-	int err;
-	int i, k;
-
-	struct list_head *pos;
-	me_device_t *device;
-	me_io_single_t karg;
-	meIOSingle_t *list;
-
-	PDEBUG("executed.\n");
-
-	err = copy_from_user(&karg, arg, sizeof(me_io_single_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to kernel space.\n");
-		return -EFAULT;
-	}
-
-	karg.errno = ME_ERRNO_SUCCESS;
-
-	list = kmalloc(sizeof(meIOSingle_t) * karg.count, GFP_KERNEL);
-
-	if (!list) {
-		PERROR("Can't get buffer for single list.\n");
-		return -ENOMEM;
-	}
-
-	err =
-	    copy_from_user(list, karg.single_list,
-			   sizeof(meIOSingle_t) * karg.count);
-
-	if (err) {
-		PERROR("Can't copy single list to kernel space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	spin_lock(&me_lock);
-
-	if ((me_filep != NULL) && (me_filep != filep)) {
-		spin_unlock(&me_lock);
-		PERROR("Driver System is logged by another process.\n");
-
-		for (i = 0; i < karg.count; i++) {
-			list[i].iErrno = ME_ERRNO_LOCKED;
-		}
-	} else {
-		me_count++;
-		spin_unlock(&me_lock);
-
-		for (i = 0; i < karg.count; i++) {
-			k = 0;
-
-			down_read(&me_rwsem);
-
-			list_for_each(pos, &me_device_list) {
-				if (k == list[i].iDevice) {
-					device =
-					    list_entry(pos, me_device_t, list);
-					break;
-				}
-
-				k++;
-			}
-
-			if (pos == &me_device_list) {
-				up_read(&me_rwsem);
-				PERROR("Invalid device number specified.\n");
-				list[i].iErrno = ME_ERRNO_INVALID_DEVICE;
-				karg.errno = ME_ERRNO_INVALID_DEVICE;
-				break;
-			} else {
-				if (list[i].iDir == ME_DIR_OUTPUT) {
-					list[i].iErrno =
-					    device->
-					    me_device_io_single_write(device,
-								      filep,
-								      list[i].
-								      iSubdevice,
-								      list[i].
-								      iChannel,
-								      list[i].
-								      iValue,
-								      list[i].
-								      iTimeOut,
-								      list[i].
-								      iFlags);
-
-					if (list[i].iErrno) {
-						up_read(&me_rwsem);
-						karg.errno = list[i].iErrno;
-						break;
-					}
-				} else if (list[i].iDir == ME_DIR_INPUT) {
-					list[i].iErrno =
-					    device->
-					    me_device_io_single_read(device,
-								     filep,
-								     list[i].
-								     iSubdevice,
-								     list[i].
-								     iChannel,
-								     &list[i].
-								     iValue,
-								     list[i].
-								     iTimeOut,
-								     list[i].
-								     iFlags);
-
-					if (list[i].iErrno) {
-						up_read(&me_rwsem);
-						karg.errno = list[i].iErrno;
-						break;
-					}
-				} else {
-					up_read(&me_rwsem);
-					PERROR
-					    ("Invalid single direction specified.\n");
-					list[i].iErrno = ME_ERRNO_INVALID_DIR;
-					karg.errno = ME_ERRNO_INVALID_DIR;
-					break;
-				}
-			}
-
-			up_read(&me_rwsem);
-		}
-
-		spin_lock(&me_lock);
-
-		me_count--;
-		spin_unlock(&me_lock);
-	}
-
-	err = copy_to_user(arg, &karg, sizeof(me_io_single_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to user space.\n");
-		return -EFAULT;
-	}
-
-	err =
-	    copy_to_user(karg.single_list, list,
-			 sizeof(meIOSingle_t) * karg.count);
-
-	if (err) {
-		PERROR("Can't copy single list to user space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	kfree(list);
-
-	return err;
-}
-
-static int me_io_stream_config(struct file *filep, me_io_stream_config_t *arg)
-{
-	int err;
-	int k = 0;
-
-	struct list_head *pos;
-	me_device_t *device;
-	me_io_stream_config_t karg;
-	meIOStreamConfig_t *list;
-
-	PDEBUG("executed.\n");
-
-	err = copy_from_user(&karg, arg, sizeof(me_io_stream_config_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to kernel space.\n");
-		return -EFAULT;
-	}
-
-	list = kmalloc(sizeof(meIOStreamConfig_t) * karg.count, GFP_KERNEL);
-
-	if (!list) {
-		PERROR("Can't get buffer for config list.\n");
-		return -ENOMEM;
-	}
-
-	err =
-	    copy_from_user(list, karg.config_list,
-			   sizeof(meIOStreamConfig_t) * karg.count);
-
-	if (err) {
-		PERROR("Can't copy config list to kernel space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	spin_lock(&me_lock);
-
-	if ((me_filep != NULL) && (me_filep != filep)) {
-		spin_unlock(&me_lock);
-		PERROR("Driver System is logged by another process.\n");
-		karg.errno = ME_ERRNO_LOCKED;
-	} else {
-		me_count++;
-		spin_unlock(&me_lock);
-
-		down_read(&me_rwsem);
-
-		list_for_each(pos, &me_device_list) {
-			if (k == karg.device) {
-				device = list_entry(pos, me_device_t, list);
-				break;
-			}
-
-			k++;
-		}
-
-		if (pos == &me_device_list) {
-			PERROR("Invalid device number specified.\n");
-			karg.errno = ME_ERRNO_INVALID_DEVICE;
-		} else {
-			karg.errno =
-			    device->me_device_io_stream_config(device, filep,
-							       karg.subdevice,
-							       list, karg.count,
-							       &karg.trigger,
-							       karg.
-							       fifo_irq_threshold,
-							       karg.flags);
-		}
-
-		up_read(&me_rwsem);
-
-		spin_lock(&me_lock);
-		me_count--;
-		spin_unlock(&me_lock);
-	}
-
-	err = copy_to_user(arg, &karg, sizeof(me_io_stream_config_t));
-
-	if (err) {
-		PERROR("Can't copy back to user space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	kfree(list);
-
-	return err;
-}
-
-static int me_query_number_devices(struct file *filep,
-				   me_query_number_devices_t *arg)
-{
-	int err;
-	me_query_number_devices_t karg;
-
-	struct list_head *pos;
-
-	PDEBUG("executed.\n");
-
-	karg.number = 0;
-	down_read(&me_rwsem);
-	list_for_each(pos, &me_device_list) {
-		karg.number++;
-	}
-
-	up_read(&me_rwsem);
-
-	karg.errno = ME_ERRNO_SUCCESS;
-
-	err = copy_to_user(arg, &karg, sizeof(me_query_number_devices_t));
-
-	if (err) {
-		PERROR("Can't copy query back to user space.\n");
-		return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int me_io_stream_stop(struct file *filep, me_io_stream_stop_t *arg)
-{
-	int err;
-	int i, k;
-
-	struct list_head *pos;
-	me_device_t *device;
-	me_io_stream_stop_t karg;
-	meIOStreamStop_t *list;
-
-	PDEBUG("executed.\n");
-
-	err = copy_from_user(&karg, arg, sizeof(me_io_stream_stop_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to kernel space.\n");
-		return -EFAULT;
-	}
-
-	karg.errno = ME_ERRNO_SUCCESS;
-
-	list = kmalloc(sizeof(meIOStreamStop_t) * karg.count, GFP_KERNEL);
-
-	if (!list) {
-		PERROR("Can't get buffer for stop list.\n");
-		return -ENOMEM;
-	}
-
-	err =
-	    copy_from_user(list, karg.stop_list,
-			   sizeof(meIOStreamStop_t) * karg.count);
-
-	if (err) {
-		PERROR("Can't copy stop list to kernel space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	spin_lock(&me_lock);
-
-	if ((me_filep != NULL) && (me_filep != filep)) {
-		spin_unlock(&me_lock);
-		PERROR("Driver System is logged by another process.\n");
-
-		for (i = 0; i < karg.count; i++) {
-			list[i].iErrno = ME_ERRNO_LOCKED;
-		}
-	} else {
-		me_count++;
-		spin_unlock(&me_lock);
-
-		for (i = 0; i < karg.count; i++) {
-			k = 0;
-			down_read(&me_rwsem);
-			list_for_each(pos, &me_device_list) {
-				if (k == list[i].iDevice) {
-					device =
-					    list_entry(pos, me_device_t, list);
-					break;
-				}
-
-				k++;
-			}
-
-			if (pos == &me_device_list) {
-				up_read(&me_rwsem);
-				PERROR("Invalid device number specified.\n");
-				list[i].iErrno = ME_ERRNO_INVALID_DEVICE;
-				karg.errno = ME_ERRNO_INVALID_DEVICE;
-				break;
-			} else {
-				list[i].iErrno =
-				    device->me_device_io_stream_stop(device,
-								     filep,
-								     list[i].
-								     iSubdevice,
-								     list[i].
-								     iStopMode,
-								     list[i].
-								     iFlags);
-
-				if (list[i].iErrno) {
-					up_read(&me_rwsem);
-					karg.errno = list[i].iErrno;
-					break;
-				}
-			}
-
-			up_read(&me_rwsem);
-		}
-
-		spin_lock(&me_lock);
-
-		me_count--;
-		spin_unlock(&me_lock);
-	}
-
-	err = copy_to_user(arg, &karg, sizeof(me_io_stream_stop_t));
-
-	if (err) {
-		PERROR("Can't copy arguments to user space.\n");
-		return -EFAULT;
-	}
-
-	err =
-	    copy_to_user(karg.stop_list, list,
-			 sizeof(meIOStreamStop_t) * karg.count);
-
-	if (err) {
-		PERROR("Can't copy stop list to user space.\n");
-		kfree(list);
-		return -EFAULT;
-	}
-
-	kfree(list);
-
-	return err;
-}
-
-/*  //me_probe_usb
-static int me_probe_usb(struct usb_interface *interface, const struct usb_device_id *id)
-{
-	//int err;
-	//me_usb_constructor_t *constructor = NULL;
-	me_device_t *n_device = NULL;
-
-	PDEBUG("executed.\n");
-
-	switch (id->idProduct)
-	{
-			case USB_DEVICE_ID_MEPHISTO_S1:
-				if((constructor = symbol_get(mephisto_s1_constructor)) == NULL){
-					err = request_module(MEPHISTO_S1_NAME);
-					if(err){
-						PERROR("Error while request for module %s.\n", MEPHISTO_S1_NAME);
-						return -ENODEV;
-					}
-					if((constructor = symbol_get(mephisto_s1_constructor)) == NULL){
-						PERROR("Can't get %s driver module constructor.\n", MEPHISTO_S1_NAME);
-						return -ENODEV;
-					}
-				}
-
-				if((n_device = (*constructor)(interface)) == NULL){
-					symbol_put(mephisto_s1_constructor);
-					PERROR("Can't get device instance of %s driver module.\n", MEPHISTO_S1_NAME);
-					return -ENODEV;
-				}
-
-				break;
-
-		default:
-			PERROR("Invalid product id.\n");
-
-			return -EINVAL;
-	}
-
-	return insert_to_device_list(n_device);
-}
-*/
-
-/*  //me_disconnect_usb
-static void me_disconnect_usb(struct usb_interface *interface)
-{
-
-	struct usb_device *device = interface_to_usbdev(interface);
-	int vendor_id = device->descriptor.idVendor;
-	int device_id = device->descriptor.idProduct;
-	int serial_no;
-
-	sscanf(&device->serial[2], "%x", &serial_no);
-
-	PDEBUG("executed.\n");
-
-	PINFO("Vendor id = 0x%08X\n", vendor_id);
-	PINFO("Device id = 0x%08X\n", device_id);
-	PINFO("Serial Number = 0x%08X\n", serial_no);
-
-	replace_with_dummy(vendor_id, device_id, serial_no);
-}
-*/
-
-static int me_ioctl(struct inode *inodep,
-		    struct file *filep, unsigned int service, unsigned long arg)
-{
-
-	PDEBUG("executed.\n");
-
-	if (_IOC_TYPE(service) != MEMAIN_MAGIC) {
-		PERROR("Invalid magic number.\n");
-		return -ENOTTY;
-	}
-
-	PDEBUG("service number: 0x%x.\n", service);
-
-	switch (service) {
-	case ME_IO_IRQ_ENABLE:
-		return me_io_irq_start(filep, (me_io_irq_start_t *) arg);
-
-	case ME_IO_IRQ_WAIT:
-		return me_io_irq_wait(filep, (me_io_irq_wait_t *) arg);
-
-	case ME_IO_IRQ_DISABLE:
-		return me_io_irq_stop(filep, (me_io_irq_stop_t *) arg);
-
-	case ME_IO_RESET_DEVICE:
-		return me_io_reset_device(filep, (me_io_reset_device_t *) arg);
-
-	case ME_IO_RESET_SUBDEVICE:
-		return me_io_reset_subdevice(filep,
-					     (me_io_reset_subdevice_t *) arg);
-
-	case ME_IO_SINGLE_CONFIG:
-		return me_io_single_config(filep,
-					   (me_io_single_config_t *) arg);
-
-	case ME_IO_SINGLE:
-		return me_io_single(filep, (me_io_single_t *) arg);
-
-	case ME_IO_STREAM_CONFIG:
-		return me_io_stream_config(filep,
-					   (me_io_stream_config_t *) arg);
-
-	case ME_IO_STREAM_NEW_VALUES:
-		return me_io_stream_new_values(filep,
-					       (me_io_stream_new_values_t *)
-					       arg);
-
-	case ME_IO_STREAM_READ:
-		return me_io_stream_read(filep, (me_io_stream_read_t *) arg);
-
-	case ME_IO_STREAM_START:
-		return me_io_stream_start(filep, (me_io_stream_start_t *) arg);
-
-	case ME_IO_STREAM_STATUS:
-		return me_io_stream_status(filep,
-					   (me_io_stream_status_t *) arg);
-
-	case ME_IO_STREAM_STOP:
-		return me_io_stream_stop(filep, (me_io_stream_stop_t *) arg);
-
-	case ME_IO_STREAM_WRITE:
-		return me_io_stream_write(filep, (me_io_stream_write_t *) arg);
-
-	case ME_LOCK_DRIVER:
-		return me_lock_driver(filep, (me_lock_driver_t *) arg);
-
-	case ME_LOCK_DEVICE:
-		return me_lock_device(filep, (me_lock_device_t *) arg);
-
-	case ME_LOCK_SUBDEVICE:
-		return me_lock_subdevice(filep, (me_lock_subdevice_t *) arg);
-
-	case ME_QUERY_INFO_DEVICE:
-		return me_query_info_device(filep,
-					    (me_query_info_device_t *) arg);
-
-	case ME_QUERY_DESCRIPTION_DEVICE:
-		return me_query_description_device(filep,
-						   (me_query_description_device_t
-						    *) arg);
-
-	case ME_QUERY_NAME_DEVICE:
-		return me_query_name_device(filep,
-					    (me_query_name_device_t *) arg);
-
-	case ME_QUERY_NAME_DEVICE_DRIVER:
-		return me_query_name_device_driver(filep,
-						   (me_query_name_device_driver_t
-						    *) arg);
-
-	case ME_QUERY_NUMBER_DEVICES:
-		return me_query_number_devices(filep,
-					       (me_query_number_devices_t *)
-					       arg);
-
-	case ME_QUERY_NUMBER_SUBDEVICES:
-		return me_query_number_subdevices(filep,
-						  (me_query_number_subdevices_t
-						   *) arg);
-
-	case ME_QUERY_NUMBER_CHANNELS:
-		return me_query_number_channels(filep,
-						(me_query_number_channels_t *)
-						arg);
-
-	case ME_QUERY_NUMBER_RANGES:
-		return me_query_number_ranges(filep,
-					      (me_query_number_ranges_t *) arg);
-
-	case ME_QUERY_RANGE_BY_MIN_MAX:
-		return me_query_range_by_min_max(filep,
-						 (me_query_range_by_min_max_t *)
-						 arg);
-
-	case ME_QUERY_RANGE_INFO:
-		return me_query_range_info(filep,
-					   (me_query_range_info_t *) arg);
-
-	case ME_QUERY_SUBDEVICE_BY_TYPE:
-		return me_query_subdevice_by_type(filep,
-						  (me_query_subdevice_by_type_t
-						   *) arg);
-
-	case ME_QUERY_SUBDEVICE_TYPE:
-		return me_query_subdevice_type(filep,
-					       (me_query_subdevice_type_t *)
-					       arg);
-
-	case ME_QUERY_SUBDEVICE_CAPS:
-		return me_query_subdevice_caps(filep,
-					       (me_query_subdevice_caps_t *)
-					       arg);
-
-	case ME_QUERY_SUBDEVICE_CAPS_ARGS:
-		return me_query_subdevice_caps_args(filep,
-						    (me_query_subdevice_caps_args_t
-						     *) arg);
-
-	case ME_QUERY_TIMER:
-		return me_query_timer(filep, (me_query_timer_t *) arg);
-
-	case ME_QUERY_VERSION_MAIN_DRIVER:
-		return me_query_version_main_driver(filep,
-						    (me_query_version_main_driver_t
-						     *) arg);
-
-	case ME_QUERY_VERSION_DEVICE_DRIVER:
-		return me_query_version_device_driver(filep,
-						      (me_query_version_device_driver_t
-						       *) arg);
-
-	case ME_CONFIG_LOAD:
-		return me_config_load(filep, (me_config_load_t *) arg);
-	}
-
-	PERROR("Invalid ioctl number.\n");
-	return -ENOTTY;
-}
-
-static struct miscdevice me_miscdev = {
-	.minor = MISC_DYNAMIC_MINOR,
-	.name = MEMAIN_NAME,
-	.fops = &me_file_operations,
-};
-
-// Init and exit of module.
-static int memain_init(void)
-{
-	int result = 0;
-
-	PDEBUG("executed.\n");
-
-	// Register pci driver. This will return 0 if the PCI subsystem is not available.
-	result = pci_register_driver(&me_pci_driver);
-
-	if (result < 0) {
-		PERROR("Can't register pci driver.\n");
-		goto INIT_ERROR_1;
-	}
-
-/*
-	// Register usb driver. This will return -ENODEV if no USB subsystem is available.
-	result = usb_register(&me_usb_driver);
-
-	if (result)
-	{
-		if (result == -ENODEV)
-		{
-			PERROR("No USB subsystem available.\n");
-		}
-		else
-		{
-			PERROR("Can't register usb driver.\n");
-			goto INIT_ERROR_2;
-		}
-	}
-*/
-	result = misc_register(&me_miscdev);
-	if (result < 0) {
-		printk(KERN_ERR MEMAIN_NAME ": can't register misc device\n");
-		goto INIT_ERROR_3;
-	}
-
-	return 0;
-
-      INIT_ERROR_3:
-//      usb_deregister(&me_usb_driver);
-
-//INIT_ERROR_2:
-	pci_unregister_driver(&me_pci_driver);
-	clear_device_list();
-
-      INIT_ERROR_1:
-	return result;
-}
-
-static void __exit memain_exit(void)
-{
-	PDEBUG("executed.\n");
-
-	misc_deregister(&me_miscdev);
-	pci_unregister_driver(&me_pci_driver);
-//      usb_deregister(&me_usb_driver);
-	clear_device_list();
-}
-
-module_init(memain_init);
-module_exit(memain_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR
-    ("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx> & Krzysztof Gantzke <k.gantzke@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Central module for Meilhaus Driver System.");
-MODULE_SUPPORTED_DEVICE("Meilhaus PCI/cPCI boards.");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/memain.h b/drivers/staging/meilhaus/memain.h
deleted file mode 100644
index 48f8367..0000000
--- a/drivers/staging/meilhaus/memain.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : memain.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- */
-
-#ifndef _MEMAIN_H_
-#define _MEMAIN_H_
-
-#include "meinternal.h"
-
-#include "meids.h"
-#include "medebug.h"
-
-#include "medevice.h"
-/*#include "me1000_device.h"
-#include "me1400_device.h"
-#include "me1600_device.h"*/
-#include "me4600_device.h"
-/*#include "me6000_device.h"
-#include "me0600_device.h"
-#include "me8100_device.h"
-#include "me8200_device.h"
-#include "me0900_device.h"*/
-#include "medummy.h"
-
-#ifdef __KERNEL__
-
-/*=============================================================================
-  Templates
-  ===========================================================================*/
-
-#define ME_LOCK_MULTIPLEX_TEMPLATE(NAME, TYPE, CALL, DEV_CALL, ARGS)	\
-static int CALL(struct file *filep, TYPE *arg){	\
-	int err = 0; \
-	int k = 0; \
-	struct list_head *pos; \
-	me_device_t *device; \
-	TYPE karg; \
-	\
-	PDEBUG("executed.\n"); \
-	\
-	err = copy_from_user(&karg, arg, sizeof(TYPE)); \
-	if(err){ \
-		PERROR("Can't copy arguments to kernel space\n"); \
-		return -EFAULT; \
-	} \
-	\
-	down_read(&me_rwsem);	\
-	\
-	list_for_each(pos, &me_device_list){	\
-		if(k == karg.device){	\
-			device = list_entry(pos, me_device_t, list);	\
-				break;	\
-		}	\
-		k++;	\
-	}	\
-	\
-	if(pos == &me_device_list){ \
-		PERROR("Invalid device number specified\n"); \
-		karg.errno = ME_ERRNO_INVALID_DEVICE; \
-	} \
-	else{ \
-		spin_lock(&me_lock);	\
-		if((me_filep != NULL) && (me_filep != filep)){	\
-			spin_unlock(&me_lock);	\
-			PERROR("Resource is locked by another process\n");	\
-			if(karg.lock == ME_LOCK_SET)	\
-				karg.errno = ME_ERRNO_LOCKED;	\
-			else if(karg.lock == ME_LOCK_RELEASE)	\
-				karg.errno = ME_ERRNO_SUCCESS;	\
-			else{	\
-				PERROR("Invalid lock specified\n");	\
-				karg.errno = ME_ERRNO_INVALID_LOCK;	\
-			}\
-		}	\
-		else {	\
-			me_count++;	\
-			spin_unlock(&me_lock);	\
-			\
-			karg.errno = device->DEV_CALL ARGS;	\
-			\
-			spin_lock(&me_lock);	\
-			me_count--;	\
-			spin_unlock(&me_lock);	\
-		}	\
-	} \
-	\
-	up_read(&me_rwsem);	\
-	\
-	err = copy_to_user(arg, &karg, sizeof(TYPE)); \
-	if(err){ \
-		PERROR("Can't copy arguments back to user space\n"); \
-		return -EFAULT; \
-	} \
-	\
-	return ME_ERRNO_SUCCESS; \
-}
-
-#define ME_IO_MULTIPLEX_TEMPLATE(NAME, TYPE, CALL, DEV_CALL, ARGS)	\
-static int CALL(struct file *filep, TYPE *arg){	\
-	int err = 0; \
-	int k = 0; \
-	struct list_head *pos; \
-	me_device_t *device; \
-	TYPE karg; \
-	\
-	PDEBUG("executed.\n"); \
-	\
-	err = copy_from_user(&karg, arg, sizeof(TYPE)); \
-	if(err){ \
-		PERROR("Can't copy arguments to kernel space\n"); \
-		return -EFAULT; \
-	} \
-	\
-	down_read(&me_rwsem);	\
-	\
-	list_for_each(pos, &me_device_list){	\
-		if(k == karg.device){	\
-			device = list_entry(pos, me_device_t, list);	\
-				break;	\
-		}	\
-		k++;	\
-	}	\
-	\
-	if(pos == &me_device_list){ \
-		PERROR("Invalid device number specified\n"); \
-		karg.errno = ME_ERRNO_INVALID_DEVICE; \
-	} \
-	else{ \
-		spin_lock(&me_lock);	\
-		if((me_filep != NULL) && (me_filep != filep)){	\
-			spin_unlock(&me_lock);	\
-			PERROR("Resource is locked by another process\n");	\
-			karg.errno = ME_ERRNO_LOCKED;	\
-		}	\
-		else {	\
-			me_count++;	\
-			spin_unlock(&me_lock);	\
-			\
-			karg.errno = device->DEV_CALL ARGS;	\
-			\
-			spin_lock(&me_lock);	\
-			me_count--;	\
-			spin_unlock(&me_lock);	\
-		}	\
-	} \
-	\
-	up_read(&me_rwsem);	\
-	\
-	err = copy_to_user(arg, &karg, sizeof(TYPE)); \
-	if(err){ \
-		PERROR("Can't copy arguments back to user space\n"); \
-		return -EFAULT; \
-	} \
- \
-	return ME_ERRNO_SUCCESS; \
-}
-
-#define ME_QUERY_MULTIPLEX_STR_TEMPLATE(NAME, TYPE, CALL, DEV_CALL, ARGS)	\
-static int CALL(struct file *filep, TYPE *arg){	\
-	int err = 0;	\
-	int k = 0;	\
-	struct list_head *pos;	\
-	me_device_t *device;	\
-	char *msg = NULL;	\
-	TYPE karg;	\
-	\
-	PDEBUG("executed.\n"); \
-	\
-	err = copy_from_user(&karg, arg, sizeof(TYPE));	\
-	if(err){	\
-		PERROR("Can't copy arguments to kernel space\n");	\
-		return -EFAULT;	\
-	}	\
-	\
-	down_read(&me_rwsem);	\
-	\
-	list_for_each(pos, &me_device_list){	\
-		if(k == karg.device){	\
-			device = list_entry(pos, me_device_t, list);	\
-				break;	\
-		}	\
-		k++;	\
-	}	\
-	\
-	if(pos == &me_device_list){	\
-		PERROR("Invalid device number specified\n");	\
-		karg.errno = ME_ERRNO_INVALID_DEVICE;	\
-	}	\
-	else{	\
-		karg.errno = device->DEV_CALL ARGS;	\
-		if(!karg.errno){	\
-			if((strlen(msg) + 1) > karg.count){	\
-				PERROR("User buffer for device name is to little\n");	\
-				karg.errno = ME_ERRNO_USER_BUFFER_SIZE;	\
-			}	\
-			else{	\
-				err = copy_to_user(karg.name, msg, strlen(msg) + 1);	\
-				if(err){	\
-					PERROR("Can't copy device name to user space\n");	\
-					return -EFAULT;	\
-				}	\
-			}	\
-		}	\
-	}	\
-	\
-	up_read(&me_rwsem);	\
-	\
-	err = copy_to_user(arg, &karg, sizeof(TYPE));	\
-	if(err){	\
-		PERROR("Can't copy query back to user space\n");	\
-		return -EFAULT;	\
-	}	\
-	\
-	return ME_ERRNO_SUCCESS;	\
-}
-
-#define ME_QUERY_MULTIPLEX_TEMPLATE(NAME, TYPE, CALL, DEV_CALL, ARGS)	\
-static int CALL(struct file *filep, TYPE *arg){	\
-	int err = 0;	\
-	int k = 0;	\
-	struct list_head *pos;	\
-	me_device_t *device;	\
-	TYPE karg;	\
-		\
-	PDEBUG("executed.\n"); \
-	 \
-	err = copy_from_user(&karg, arg, sizeof(TYPE));	\
-	if(err){	\
-		PERROR("Can't copy arguments from user space\n");	\
-		return -EFAULT;	\
-	}	\
-	\
-	down_read(&me_rwsem);	\
-	\
-	list_for_each(pos, &me_device_list){	\
-		if(k == karg.device){	\
-			device = list_entry(pos, me_device_t, list);	\
-			break;	\
-		}	\
-		k++;	\
-	}	\
-		\
-	if(pos == &me_device_list){	\
-		PERROR("Invalid device number specified\n");	\
-		karg.errno = ME_ERRNO_INVALID_DEVICE;	\
-	}	\
-	else{	\
-		karg.errno = device->DEV_CALL ARGS;	\
-	}	\
-	\
-	up_read(&me_rwsem);	\
-	\
-	err = copy_to_user(arg, &karg, sizeof(TYPE));	\
-	if(err){	\
-		PERROR("Can't copy arguments to user space\n");	\
-		return -EFAULT;	\
-	}	\
-		\
-	return ME_ERRNO_SUCCESS;	\
-}
-
-#endif //__KERNEL__
-#endif
diff --git a/drivers/staging/meilhaus/meplx_reg.h b/drivers/staging/meilhaus/meplx_reg.h
deleted file mode 100644
index 1868614..0000000
--- a/drivers/staging/meilhaus/meplx_reg.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/**
- * @file meplx_reg.h
- *
- * @brief PLX 9052 PCI bridge register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _MEPLX_REG_H_
-#define _MEPLX_REG_H_
-
-#ifdef __KERNEL__
-
-#define PLX_INTCSR				0x4C		/**< Interrupt control and status register. */
-#define PLX_INTCSR_LOCAL_INT1_EN		0x01		/**< If set, local interrupt 1 is enabled (r/w). */
-#define PLX_INTCSR_LOCAL_INT1_POL		0x02		/**< If set, local interrupt 1 polarity is active high (r/w). */
-#define PLX_INTCSR_LOCAL_INT1_STATE		0x04		/**< If set, local interrupt 1 is active (r/_). */
-#define PLX_INTCSR_LOCAL_INT2_EN		0x08		/**< If set, local interrupt 2 is enabled (r/w). */
-#define PLX_INTCSR_LOCAL_INT2_POL		0x10		/**< If set, local interrupt 2 polarity is active high (r/w). */
-#define PLX_INTCSR_LOCAL_INT2_STATE		0x20		/**< If set, local interrupt 2 is active  (r/_). */
-#define PLX_INTCSR_PCI_INT_EN			0x40		/**< If set, PCI interrupt is enabled (r/w). */
-#define PLX_INTCSR_SOFT_INT			0x80		/**< If set, a software interrupt is generated (r/w). */
-
-#define PLX_ICR					0x50		/**< Initialization control register. */
-#define PLX_ICR_BIT_EEPROM_CLOCK_SET		0x01000000
-#define PLX_ICR_BIT_EEPROM_CHIP_SELECT		0x02000000
-#define PLX_ICR_BIT_EEPROM_WRITE		0x04000000
-#define PLX_ICR_BIT_EEPROM_READ			0x08000000
-#define PLX_ICR_BIT_EEPROM_VALID		0x10000000
-
-#define PLX_ICR_MASK_EEPROM			0x1F000000
-#define EEPROM_DELAY				1
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/meslist.c b/drivers/staging/meilhaus/meslist.c
deleted file mode 100644
index ce49114..0000000
--- a/drivers/staging/meilhaus/meslist.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/**
- * @file me_slist.c
- *
- * @brief Implements the subdevice list class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "meerror.h"
-#include "medefines.h"
-
-#include "meslist.h"
-#include "medebug.h"
-
-int me_slist_query_number_subdevices(struct me_slist *slist, int *number)
-{
-	PDEBUG_LOCKS("called.\n");
-	*number = slist->n;
-	return ME_ERRNO_SUCCESS;
-}
-
-unsigned int me_slist_get_number_subdevices(struct me_slist *slist)
-{
-	PDEBUG_LOCKS("called.\n");
-	return slist->n;
-}
-
-me_subdevice_t *me_slist_get_subdevice(struct me_slist * slist,
-				       unsigned int index)
-{
-
-	struct list_head *pos;
-	me_subdevice_t *subdevice = NULL;
-	unsigned int i = 0;
-
-	PDEBUG_LOCKS("called.\n");
-
-	if (index >= slist->n) {
-		PERROR("Index out of range.\n");
-		return NULL;
-	}
-
-	list_for_each(pos, &slist->head) {
-		if (i == index) {
-			subdevice = list_entry(pos, me_subdevice_t, list);
-			break;
-		}
-
-		++i;
-	}
-
-	return subdevice;
-}
-
-int me_slist_get_subdevice_by_type(struct me_slist *slist,
-				   unsigned int start_subdevice,
-				   int type, int subtype, int *subdevice)
-{
-	me_subdevice_t *pos;
-	int s_type, s_subtype;
-	unsigned int index = 0;
-
-	PDEBUG_LOCKS("called.\n");
-
-	if (start_subdevice >= slist->n) {
-		PERROR("Start index out of range.\n");
-		return ME_ERRNO_NOMORE_SUBDEVICE_TYPE;
-	}
-
-	list_for_each_entry(pos, &slist->head, list) {
-		if (index < start_subdevice) {	// Go forward to start subdevice.
-			++index;
-			continue;
-		}
-
-		pos->me_subdevice_query_subdevice_type(pos,
-						       &s_type, &s_subtype);
-
-		if (subtype == ME_SUBTYPE_ANY) {
-			if (s_type == type)
-				break;
-		} else {
-			if ((s_type == type) && (s_subtype == subtype))
-				break;
-		}
-
-		++index;
-	}
-
-	if (index >= slist->n) {
-		return ME_ERRNO_NOMORE_SUBDEVICE_TYPE;
-	}
-
-	*subdevice = index;
-
-	return ME_ERRNO_SUCCESS;
-}
-
-void me_slist_add_subdevice_tail(struct me_slist *slist,
-				 me_subdevice_t *subdevice)
-{
-	PDEBUG_LOCKS("called.\n");
-
-	list_add_tail(&subdevice->list, &slist->head);
-	++slist->n;
-}
-
-me_subdevice_t *me_slist_del_subdevice_tail(struct me_slist *slist)
-{
-
-	struct list_head *last;
-	me_subdevice_t *subdevice;
-
-	PDEBUG_LOCKS("called.\n");
-
-	if (list_empty(&slist->head))
-		return NULL;
-
-	last = slist->head.prev;
-
-	subdevice = list_entry(last, me_subdevice_t, list);
-
-	list_del(last);
-
-	--slist->n;
-
-	return subdevice;
-}
-
-int me_slist_init(me_slist_t *slist)
-{
-	PDEBUG_LOCKS("called.\n");
-
-	INIT_LIST_HEAD(&slist->head);
-	slist->n = 0;
-	return 0;
-}
-
-void me_slist_deinit(me_slist_t *slist)
-{
-
-	struct list_head *s;
-	me_subdevice_t *subdevice;
-
-	PDEBUG_LOCKS("called.\n");
-
-	while (!list_empty(&slist->head)) {
-		s = slist->head.next;
-		list_del(s);
-		subdevice = list_entry(s, me_subdevice_t, list);
-		subdevice->me_subdevice_destructor(subdevice);
-	}
-
-	slist->n = 0;
-}
diff --git a/drivers/staging/meilhaus/meslist.h b/drivers/staging/meilhaus/meslist.h
deleted file mode 100644
index d26c896..0000000
--- a/drivers/staging/meilhaus/meslist.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/**
- * @file me_slist.h
- *
- * @brief Provides the subdevice list class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _ME_SLIST_H_
-#define _ME_SLIST_H_
-
-#include <linux/list.h>
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The subdevice list container.
- */
-typedef struct me_slist {
-	struct list_head head;		/**< The head of the internal list. */
-	unsigned int n;			/**< The number of subdevices in the list. */
-} me_slist_t;
-
-/**
- * @brief Queries the number of subdevices currently inside the list.
- *
- * @param slist The subdevice list to query.
- * @param[out] number The number of subdevices of the device.
- *
- * @return ME-iDS error code.
- */
-int me_slist_query_number_subdevices(struct me_slist *slist, int *number);
-
-/**
- * @brief Returns the number of subdevices currently inside the list.
- *
- * @param slist The subdevice list to query.
- *
- * @return The number of subdevices in the list.
- */
-unsigned int me_slist_get_number_subdevices(struct me_slist *slist);
-
-/**
- * @brief Get a subdevice by index.
- *
- * @param slist The subdevice list to query.
- * @param index The index of the subdevice to get in the list.
- *
- * @return The subdevice at index if available.\n
- *         NULL if the index is out of range.
- */
-me_subdevice_t *me_slist_get_subdevice(struct me_slist *slist,
-				       unsigned int index);
-
-/**
- * @brief Get a subdevice index by type and subtype.
- *
- * @param slist The subdevice list to query.
- * @param start_subdevice The subdevice index at which the start shall begin.
- * @param type The type of the subdevice to query.
- * @param subtype The subtype of the subdevice to query.
- * @param[out] subdevice On success this parameter returns the index of the subdevice matching the requested type.
- *
- * @return ME_ERRNO_SUCCESS on success.
- */
-int me_slist_get_subdevice_by_type(struct me_slist *slist,
-				   unsigned int start_subdevice,
-				   int type, int subtype, int *subdevice);
-
-/**
- * @brief Adds a subdevice to the tail of the list.
- *
- * @param slist The subdevice list to add a subdevice to.
- * @param subdevice The subdevice to add to the list.
- */
-void me_slist_add_subdevice_tail(struct me_slist *slist,
-				 me_subdevice_t * subdevice);
-
-/**
- * @brief Removes a subdevice from the tail of the list.
- *
- * @param slist The subdevice list.
- *
- * @return Pointer to the removed subdeivce.\n
- *         NULL in cases where the list was empty.
- */
-me_subdevice_t *me_slist_del_subdevice_tail(struct me_slist *slist);
-
-/**
- * @brief Initializes a subdevice list structure.
- *
- * @param lock The subdevice list structure to initialize.
- * @return 0 on success.
- */
-int me_slist_init(me_slist_t * slist);
-
-/**
- * @brief Deinitializes a subdevice list structure and destructs every subdevice in it.
- *
- * @param slist The subdevice list structure to deinitialize.
- * @return 0 on success.
- */
-void me_slist_deinit(me_slist_t * slist);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/meslock.c b/drivers/staging/meilhaus/meslock.c
deleted file mode 100644
index abcdb4a..0000000
--- a/drivers/staging/meilhaus/meslock.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/**
- * @file meslock.c
- *
- * @brief Implements the subdevice lock class.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/spinlock.h>
-
-#include "medefines.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "meslock.h"
-
-int me_slock_enter(struct me_slock *slock, struct file *filep)
-{
-	PDEBUG_LOCKS("executed.\n");
-
-	spin_lock(&slock->spin_lock);
-
-	if ((slock->filep) != NULL && (slock->filep != filep)) {
-		PERROR("Subdevice is locked by another process.\n");
-		spin_unlock(&slock->spin_lock);
-		return ME_ERRNO_LOCKED;
-	}
-
-	slock->count++;
-
-	spin_unlock(&slock->spin_lock);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-int me_slock_exit(struct me_slock *slock, struct file *filep)
-{
-	PDEBUG_LOCKS("executed.\n");
-
-	spin_lock(&slock->spin_lock);
-	slock->count--;
-	spin_unlock(&slock->spin_lock);
-
-	return ME_ERRNO_SUCCESS;
-}
-
-int me_slock_lock(struct me_slock *slock, struct file *filep, int lock)
-{
-	PDEBUG_LOCKS("executed.\n");
-
-	switch (lock) {
-
-	case ME_LOCK_RELEASE:
-		spin_lock(&slock->spin_lock);
-
-		if (slock->filep == filep)
-			slock->filep = NULL;
-
-		spin_unlock(&slock->spin_lock);
-
-		break;
-
-	case ME_LOCK_SET:
-		spin_lock(&slock->spin_lock);
-
-		if (slock->count) {
-			spin_unlock(&slock->spin_lock);
-			PERROR("Subdevice is used by another process.\n");
-			return ME_ERRNO_USED;
-		} else if (slock->filep == NULL)
-			slock->filep = filep;
-		else if (slock->filep != filep) {
-			spin_unlock(&slock->spin_lock);
-			PERROR("Subdevice is locked by another process.\n");
-			return ME_ERRNO_LOCKED;
-		}
-
-		spin_unlock(&slock->spin_lock);
-
-		break;
-
-	case ME_LOCK_CHECK:
-		spin_lock(&slock->spin_lock);
-
-		if (slock->count) {
-			spin_unlock(&slock->spin_lock);
-			return ME_ERRNO_USED;
-		} else if ((slock->filep != NULL) && (slock->filep != filep)) {
-			spin_unlock(&slock->spin_lock);
-			return ME_ERRNO_LOCKED;
-		}
-
-		spin_unlock(&slock->spin_lock);
-
-		break;
-
-	default:
-		break;
-	}
-
-	return ME_ERRNO_SUCCESS;
-}
-
-void me_slock_deinit(struct me_slock *slock)
-{
-	PDEBUG_LOCKS("executed.\n");
-}
-
-int me_slock_init(me_slock_t *slock)
-{
-	PDEBUG_LOCKS("executed.\n");
-
-	slock->filep = NULL;
-	slock->count = 0;
-	spin_lock_init(&slock->spin_lock);
-
-	return 0;
-}
diff --git a/drivers/staging/meilhaus/meslock.h b/drivers/staging/meilhaus/meslock.h
deleted file mode 100644
index f42b25c..0000000
--- a/drivers/staging/meilhaus/meslock.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/**
- * @file meslock.h
- *
- * @brief Provides the subdevice lock class.
- * @note Copyright (C) 2006 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _MESLOCK_H_
-#define _MESLOCK_H_
-
-#include <linux/spinlock.h>
-
-#ifdef __KERNEL__
-
-/**
- * @brief The subdevice lock class.
- */
-typedef struct me_slock {
-	struct file *filep;		/**< Pointer to file structure holding the subdevice. */
-	int count;			/**< Number of tasks which are inside the subdevice. */
-	spinlock_t spin_lock;		/**< Spin lock protecting the attributes from concurrent access. */
-} me_slock_t;
-
-/**
- * @brief Tries to enter a subdevice.
- *
- * @param slock The subdevice lock instance.
- * @param filep The file structure identifying the calling process.
- *
- * @return 0 on success.
- */
-int me_slock_enter(struct me_slock *slock, struct file *filep);
-
-/**
- * @brief Exits a subdevice.
- *
- * @param slock The subdevice lock instance.
- * @param filep The file structure identifying the calling process.
- *
- * @return 0 on success.
- */
-int me_slock_exit(struct me_slock *slock, struct file *filep);
-
-/**
- * @brief Tries to perform a locking action on a subdevice.
- *
- * @param slock The subdevice lock instance.
- * @param filep The file structure identifying the calling process.
- * @param The action to be done.
- *
- * @return 0 on success.
- */
-int me_slock_lock(struct me_slock *slock, struct file *filep, int lock);
-
-/**
- * @brief Initializes a lock structure.
- *
- * @param slock The lock structure to initialize.
- * @return 0 on success.
- */
-int me_slock_init(me_slock_t * slock);
-
-/**
- * @brief Deinitializes a lock structure.
- *
- * @param slock The lock structure to deinitialize.
- * @return 0 on success.
- */
-void me_slock_deinit(me_slock_t * slock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/mesubdevice.c b/drivers/staging/meilhaus/mesubdevice.c
deleted file mode 100644
index b2e9567..0000000
--- a/drivers/staging/meilhaus/mesubdevice.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/**
- * @file mesubdevice.c
- *
- * @brief Subdevice base class implemention.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#include <linux/slab.h>
-
-#include "medefines.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "mesubdevice.h"
-
-static int me_subdevice_io_irq_start(struct me_subdevice *subdevice,
-				     struct file *filep,
-				     int channel,
-				     int irq_source,
-				     int irq_edge, int irq_arg, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_irq_wait(struct me_subdevice *subdevice,
-				    struct file *filep,
-				    int channel,
-				    int *irq_count,
-				    int *value, int time_out, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_irq_stop(struct me_subdevice *subdevice,
-				    struct file *filep, int channel, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_reset_subdevice(struct me_subdevice *subdevice,
-					   struct file *filep, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_single_config(struct me_subdevice *subdevice,
-					 struct file *filep,
-					 int channel,
-					 int single_config,
-					 int ref,
-					 int trig_chan,
-					 int trig_type,
-					 int trig_edge, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_single_read(struct me_subdevice *subdevice,
-				       struct file *filep,
-				       int channel,
-				       int *value, int time_out, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_single_write(struct me_subdevice *subdevice,
-					struct file *filep,
-					int channel,
-					int value, int time_out, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_stream_config(struct me_subdevice *subdevice,
-					 struct file *filep,
-					 meIOStreamConfig_t *config_list,
-					 int count,
-					 meIOStreamTrigger_t *trigger,
-					 int fifo_irq_threshold, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_stream_new_values(struct me_subdevice *subdevice,
-					     struct file *filep,
-					     int time_out,
-					     int *count, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_stream_read(struct me_subdevice *subdevice,
-				       struct file *filep,
-				       int read_mode,
-				       int *values, int *count, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_stream_start(struct me_subdevice *subdevice,
-					struct file *filep,
-					int start_mode, int time_out, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_stream_status(struct me_subdevice *subdevice,
-					 struct file *filep,
-					 int wait,
-					 int *status, int *count, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_stream_stop(struct me_subdevice *subdevice,
-				       struct file *filep,
-				       int stop_mode, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_io_stream_write(struct me_subdevice *subdevice,
-					struct file *filep,
-					int write_mode,
-					int *values, int *count, int flags)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_lock_subdevice(me_subdevice_t *subdevice,
-				       struct file *filep, int lock, int flags)
-{
-	PDEBUG("executed.\n");
-	return me_slock_lock(&subdevice->lock, filep, lock);
-}
-
-static int me_subdevice_query_number_channels(struct me_subdevice *subdevice,
-					      int *number)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_query_number_ranges(struct me_subdevice *subdevice,
-					    int unit, int *count)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_query_range_by_min_max(struct me_subdevice *subdevice,
-					       int unit,
-					       int *min,
-					       int *max,
-					       int *maxdata, int *range)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_query_range_info(struct me_subdevice *subdevice,
-					 int range,
-					 int *unit,
-					 int *min, int *max, int *maxdata)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_query_subdevice_type(struct me_subdevice *subdevice,
-					     int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_query_subdevice_caps(struct me_subdevice *subdevice,
-					     int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int me_subdevice_query_subdevice_caps_args(struct me_subdevice
-						  *subdevice, int cap,
-						  int *args, int count)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_query_timer(struct me_subdevice *subdevice,
-				    int timer,
-				    int *base_frequency,
-				    long long *min_ticks, long long *max_ticks)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_NOT_SUPPORTED;
-}
-
-static int me_subdevice_config_load(struct me_subdevice *subdevice,
-				    me_cfg_device_entry_t *config)
-{
-	PDEBUG("executed.\n");
-	return ME_ERRNO_SUCCESS;
-}
-
-static void me_subdevice_destructor(struct me_subdevice *subdevice)
-{
-	PDEBUG("executed.\n");
-	me_subdevice_deinit(subdevice);
-	kfree(subdevice);
-}
-
-int me_subdevice_init(me_subdevice_t *subdevice)
-{
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Init list head */
-	INIT_LIST_HEAD(&subdevice->list);
-
-	/* Initialize the subdevice lock instance */
-
-	err = me_slock_init(&subdevice->lock);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice lock instance.\n");
-		return 1;
-	}
-
-	/* Subdevice base class methods */
-	subdevice->me_subdevice_io_irq_start = me_subdevice_io_irq_start;
-	subdevice->me_subdevice_io_irq_wait = me_subdevice_io_irq_wait;
-	subdevice->me_subdevice_io_irq_stop = me_subdevice_io_irq_stop;
-	subdevice->me_subdevice_io_reset_subdevice =
-	    me_subdevice_io_reset_subdevice;
-	subdevice->me_subdevice_io_single_config =
-	    me_subdevice_io_single_config;
-	subdevice->me_subdevice_io_single_read = me_subdevice_io_single_read;
-	subdevice->me_subdevice_io_single_write = me_subdevice_io_single_write;
-	subdevice->me_subdevice_io_stream_config =
-	    me_subdevice_io_stream_config;
-	subdevice->me_subdevice_io_stream_new_values =
-	    me_subdevice_io_stream_new_values;
-	subdevice->me_subdevice_io_stream_read = me_subdevice_io_stream_read;
-	subdevice->me_subdevice_io_stream_start = me_subdevice_io_stream_start;
-	subdevice->me_subdevice_io_stream_status =
-	    me_subdevice_io_stream_status;
-	subdevice->me_subdevice_io_stream_stop = me_subdevice_io_stream_stop;
-	subdevice->me_subdevice_io_stream_write = me_subdevice_io_stream_write;
-	subdevice->me_subdevice_lock_subdevice = me_subdevice_lock_subdevice;
-	subdevice->me_subdevice_query_number_channels =
-	    me_subdevice_query_number_channels;
-	subdevice->me_subdevice_query_number_ranges =
-	    me_subdevice_query_number_ranges;
-	subdevice->me_subdevice_query_range_by_min_max =
-	    me_subdevice_query_range_by_min_max;
-	subdevice->me_subdevice_query_range_info =
-	    me_subdevice_query_range_info;
-	subdevice->me_subdevice_query_subdevice_type =
-	    me_subdevice_query_subdevice_type;
-	subdevice->me_subdevice_query_subdevice_caps =
-	    me_subdevice_query_subdevice_caps;
-	subdevice->me_subdevice_query_subdevice_caps_args =
-	    me_subdevice_query_subdevice_caps_args;
-	subdevice->me_subdevice_query_timer = me_subdevice_query_timer;
-	subdevice->me_subdevice_config_load = me_subdevice_config_load;
-	subdevice->me_subdevice_destructor = me_subdevice_destructor;
-
-	return 0;
-}
-
-void me_subdevice_deinit(me_subdevice_t *subdevice)
-{
-	PDEBUG("executed.\n");
-	me_subdevice_io_reset_subdevice(subdevice, NULL,
-					ME_IO_RESET_SUBDEVICE_NO_FLAGS);
-	me_slock_deinit(&subdevice->lock);
-}
diff --git a/drivers/staging/meilhaus/mesubdevice.h b/drivers/staging/meilhaus/mesubdevice.h
deleted file mode 100644
index 19ec2b5..0000000
--- a/drivers/staging/meilhaus/mesubdevice.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/**
- * @file mesubdevice.h
- *
- * @brief Provides the subdevice base class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-#ifndef _MESUBDEVICE_H_
-#define _MESUBDEVICE_H_
-
-#include <linux/list.h>
-
-#include "metypes.h"
-#include "meioctl.h"
-#include "meslock.h"
-
-# include <linux/workqueue.h>
-
-#ifdef __KERNEL__
-
-/**
- * @brief Macro used to enter a subdevice.
- */
-#define ME_SUBDEVICE_ENTER	\
-{ \
-	int err; \
-	err = me_slock_enter(&instance->base.lock, filep); \
-	if(err){ \
-		PERROR("Cannot enter subdevice.\n"); \
-		return err; \
-	} \
-}
-
-/**
- * @brief Macro used to exit a subdevice.
- */
-#define ME_SUBDEVICE_EXIT	\
-{\
-	int err; \
-	err = me_slock_exit(&instance->base.lock, filep); \
-	if(err){ \
-		PERROR("Cannot exit subdevice.\n"); \
-		return err; \
-	} \
-}
-
-/**
- * @brief The subdevice base class.
- */
-typedef struct me_subdevice {
-	/* Attributes */
-	struct list_head list;		/**< Enables the subdevice to be added to a dynamic list. */
-	me_slock_t lock;		/**< Used by user application in order to lock the subdevice for exclusive usage. */
-
-	/* Methods */
-	int (*me_subdevice_io_irq_start) (struct me_subdevice * subdevice,
-					  struct file * filep,
-					  int channel,
-					  int irq_source,
-					  int irq_edge, int irq_arg, int flags);
-
-	int (*me_subdevice_io_irq_wait) (struct me_subdevice * subdevice,
-					 struct file * filep,
-					 int channel,
-					 int *irq_count,
-					 int *value, int time_out, int flags);
-
-	int (*me_subdevice_io_irq_stop) (struct me_subdevice * subdevice,
-					 struct file * filep,
-					 int channel, int flags);
-
-	int (*me_subdevice_io_reset_subdevice) (struct me_subdevice * subdevice,
-						struct file * filep, int flags);
-
-	int (*me_subdevice_io_single_config) (struct me_subdevice * subdevice,
-					      struct file * filep,
-					      int channel,
-					      int single_config,
-					      int ref,
-					      int trig_chan,
-					      int trig_type,
-					      int trig_edge, int flags);
-
-	int (*me_subdevice_io_single_read) (struct me_subdevice * subdevice,
-					    struct file * filep,
-					    int channel,
-					    int *value,
-					    int time_out, int flags);
-
-	int (*me_subdevice_io_single_write) (struct me_subdevice * subdevice,
-					     struct file * filep,
-					     int channel,
-					     int value,
-					     int time_out, int flags);
-
-	int (*me_subdevice_io_stream_config) (struct me_subdevice * subdevice,
-					      struct file * filep,
-					      meIOStreamConfig_t * config_list,
-					      int count,
-					      meIOStreamTrigger_t * trigger,
-					      int fifo_irq_threshold,
-					      int flags);
-
-	int (*me_subdevice_io_stream_new_values) (struct me_subdevice *
-						  subdevice,
-						  struct file * filep,
-						  int time_out, int *count,
-						  int flags);
-
-	int (*me_subdevice_io_stream_read) (struct me_subdevice * subdevice,
-					    struct file * filep,
-					    int read_mode,
-					    int *values, int *count, int flags);
-
-	int (*me_subdevice_io_stream_start) (struct me_subdevice * subdevice,
-					     struct file * filep,
-					     int start_mode,
-					     int time_out, int flags);
-
-	int (*me_subdevice_io_stream_status) (struct me_subdevice * subdevice,
-					      struct file * filep,
-					      int wait,
-					      int *status,
-					      int *count, int flags);
-
-	int (*me_subdevice_io_stream_stop) (struct me_subdevice * subdevice,
-					    struct file * filep,
-					    int stop_mode, int flags);
-
-	int (*me_subdevice_io_stream_write) (struct me_subdevice * subdevice,
-					     struct file * filep,
-					     int write_mode,
-					     int *values,
-					     int *count, int flags);
-
-	int (*me_subdevice_lock_subdevice) (struct me_subdevice * subdevice,
-					    struct file * filep,
-					    int lock, int flags);
-
-	int (*me_subdevice_query_number_channels) (struct me_subdevice *
-						   subdevice, int *number);
-
-	int (*me_subdevice_query_number_ranges) (struct me_subdevice *
-						 subdevice, int unit,
-						 int *count);
-
-	int (*me_subdevice_query_range_by_min_max) (struct me_subdevice *
-						    subdevice, int unit,
-						    int *min, int *max,
-						    int *maxdata, int *range);
-
-	int (*me_subdevice_query_range_info) (struct me_subdevice * subdevice,
-					      int range,
-					      int *unit,
-					      int *min, int *max, int *maxdata);
-
-	int (*me_subdevice_query_subdevice_type) (struct me_subdevice *
-						  subdevice, int *type,
-						  int *subtype);
-
-	int (*me_subdevice_query_subdevice_caps) (struct me_subdevice *
-						  subdevice, int *caps);
-
-	int (*me_subdevice_query_subdevice_caps_args) (struct me_subdevice *
-						       subdevice, int cap,
-						       int *args, int count);
-
-	int (*me_subdevice_query_timer) (struct me_subdevice * subdevice,
-					 int timer,
-					 int *base_frequency,
-					 long long *min_ticks,
-					 long long *max_ticks);
-
-	int (*me_subdevice_config_load) (struct me_subdevice * subdevice,
-					 me_cfg_device_entry_t * config);
-
-	void (*me_subdevice_destructor) (struct me_subdevice * subdevice);
-} me_subdevice_t;
-
-/**
- * @brief Initializes a subdevice structure.
- *
- * @param subdevice The subdevice structure to initialize.
- * @return 0 on success.
- */
-int me_subdevice_init(me_subdevice_t * subdevice);
-
-/**
- * @brief Deinitializes a subdevice structure.
- *
- * @param subdevice The subdevice structure to initialize.
- */
-void me_subdevice_deinit(me_subdevice_t * subdevice);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/metempl_device.c b/drivers/staging/meilhaus/metempl_device.c
deleted file mode 100644
index bdaf6df..0000000
--- a/drivers/staging/meilhaus/metempl_device.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/**
- * @file metempl_device.c
- *
- * @brief template device class implementation.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-#ifndef MODULE
-#  define MODULE
-#endif
-
-#include <linux/module.h>
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <meids.h>
-#include "meerror.h"
-#include "mecommon.h"
-#include "meinternal.h"
-
-#include "medebug.h"
-#include "medevice.h"
-#include "metempl_device.h"
-#include "mesubdevice.h"
-#include "metempl_sub.h"
-
-me_device_t *metempl_pci_constructor(struct pci_dev *pci_device)
-{
-	metempl_device_t *metempl_device;
-	me_subdevice_t *subdevice;
-	unsigned int version_idx;
-	int err;
-	int i;
-
-	PDEBUG("executed.\n");
-
-	// Allocate structure for device instance.
-	metempl_device = kmalloc(sizeof(metempl_device_t), GFP_KERNEL);
-
-	if (!metempl_device) {
-		PERROR("Cannot get memory for device instance.\n");
-		return NULL;
-	}
-
-	memset(metempl_device, 0, sizeof(metempl_device_t));
-
-	// Initialize base class structure.
-	err = me_device_pci_init((me_device_t *) metempl_device, pci_device);
-
-	if (err) {
-		kfree(metempl_device);
-		PERROR("Cannot initialize device base class.\n");
-		return NULL;
-	}
-
-	/* Get the index in the device version information table. */
-	version_idx =
-	    metempl_versions_get_device_index(metempl_device->base.info.pci.
-					      device_id);
-
-	// Initialize spin lock .
-	spin_lock_init(&metempl_device->ctrl_reg_lock);
-
-	// Create subdevice instances.
-	for (i = 0; i < metempl_versions[version_idx].subdevices; i++) {
-		subdevice =
-		    (me_subdevice_t *) metempl_sub_constructor(metempl_device->
-							       base.info.pci.
-							       reg_bases[2], i,
-							       &metempl_device->
-							       ctrl_reg_lock);
-
-		if (!subdevice) {
-			me_device_deinit((me_device_t *) metempl_device);
-			kfree(metempl_device);
-			PERROR("Cannot get memory for subdevice.\n");
-			return NULL;
-		}
-
-		me_slist_add_subdevice_tail(&metempl_device->base.slist,
-					    subdevice);
-	}
-
-	/* Overwrite base class methods if applicable. */
-
-	return (me_device_t *) metempl_device;
-}
-EXPORT_SYMBOL(metempl_pci_constructor);
-
-// Init and exit of module.
-
-static int __init metempl_init(void)
-{
-	PDEBUG("executed.\n.");
-	return 0;
-}
-
-static void __exit metempl_exit(void)
-{
-	PDEBUG("executed.\n.");
-}
-
-module_init(metempl_init);
-
-module_exit(metempl_exit);
-
-// Administrative stuff for modinfo.
-MODULE_AUTHOR("Guenter Gebhardt <g.gebhardt@xxxxxxxxxxx>");
-MODULE_DESCRIPTION("Device Driver Module for Template Device");
-MODULE_SUPPORTED_DEVICE("Meilhaus Template Devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/meilhaus/metempl_device.h b/drivers/staging/meilhaus/metempl_device.h
deleted file mode 100644
index c0626e7..0000000
--- a/drivers/staging/meilhaus/metempl_device.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/**
- * @file metempl_device.h
- *
- * @brief template device class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _METEMPL_DEVICE_H
-#define _METEMPL_DEVICE_H
-
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include "medevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief Structure holding template device capabilities.
- */
-typedef struct metempl_version {
-	uint16_t device_id;
-	unsigned int subdevices;
-} metempl_version_t;
-
-/**
- * @brief Device capabilities.
- */
-static metempl_version_t metempl_versions[] = {
-	{0xDEAD, 1},
-	{0},
-};
-
-#define METEMPL_DEVICE_VERSIONS (ARRAY_SIZE(metempl_versions) - 1) /**< Returns the number of entries in #metempl_versions. */
-
-/**
- * @brief Returns the index of the device entry in #metempl_versions.
- *
- * @param device_id The PCI device id of the device to query.
- * @return The index of the device in #metempl_versions.
- */
-static inline unsigned int metempl_versions_get_device_index(uint16_t device_id)
-{
-	unsigned int i;
-	for (i = 0; i < METEMPL_DEVICE_VERSIONS; i++)
-		if (metempl_versions[i].device_id == device_id)
-			break;
-	return i;
-}
-
-/**
- * @brief The template device class structure.
- */
-typedef struct metempl_device {
-	me_device_t base;			/**< The Meilhaus device base class. */
-
-	/* Child class attributes. */
-	spinlock_t ctrl_reg_lock;
-} metempl_device_t;
-
-/**
- * @brief The template device class constructor.
- *
- * @param pci_device The pci device structure given by the PCI subsystem.
- *
- * @return On succes a new template device instance. \n
- *         NULL on error.
- */
-me_device_t *metempl_pci_constructor(struct pci_dev *pci_device)
-    __attribute__ ((weak));
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/metempl_sub.c b/drivers/staging/meilhaus/metempl_sub.c
deleted file mode 100644
index b5a6a97..0000000
--- a/drivers/staging/meilhaus/metempl_sub.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/**
- * @file metempl_sub.c
- *
- * @brief Subdevice instance.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-
-/*
- * Includes
- */
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-
-#include "medefines.h"
-#include "meinternal.h"
-#include "meerror.h"
-
-#include "medebug.h"
-#include "metempl_sub_reg.h"
-#include "metempl_sub.h"
-
-/*
- * Defines
- */
-
-/*
- * Functions
- */
-
-static void metempl_sub_destructor(struct me_subdevice *subdevice)
-{
-	metempl_sub_subdevice_t *instance;
-
-	PDEBUG("executed.\n");
-	instance = (metempl_sub_subdevice_t *) subdevice;
-
-	/* Until there this was the things the default constructor does.
-	   If you do not have any additional things to do you can wipe it out. */
-
-	me_subdevice_deinit(&instance->base);
-	kfree(instance);
-}
-
-static int metempl_sub_query_number_channels(me_subdevice_t *subdevice,
-					     int *number)
-{
-	PDEBUG("executed.\n");
-	*number = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int metempl_sub_query_subdevice_type(me_subdevice_t *subdevice,
-					    int *type, int *subtype)
-{
-	PDEBUG("executed.\n");
-	*type = 0;
-	*subtype = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-static int metempl_sub_query_subdevice_caps(me_subdevice_t *subdevice,
-					    int *caps)
-{
-	PDEBUG("executed.\n");
-	*caps = 0;
-	return ME_ERRNO_SUCCESS;
-}
-
-metempl_sub_subdevice_t *metempl_sub_constructor(uint32_t reg_base,
-						 unsigned int sub_idx,
-						 spinlock_t *ctrl_reg_lock)
-{
-	metempl_sub_subdevice_t *subdevice;
-	int err;
-
-	PDEBUG("executed.\n");
-
-	/* Allocate memory for subdevice instance */
-	subdevice = kmalloc(sizeof(metempl_sub_subdevice_t), GFP_KERNEL);
-
-	if (!subdevice) {
-		PERROR("Cannot get memory for subdevice instance.\n");
-		return NULL;
-	}
-
-	memset(subdevice, 0, sizeof(metempl_sub_subdevice_t));
-
-	/* Check if subdevice index is out of range */
-
-	if (sub_idx >= 2) {
-		PERROR("Template subdevice index is out of range.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-
-	/* Initialize subdevice base class */
-	err = me_subdevice_init(&subdevice->base);
-
-	if (err) {
-		PERROR("Cannot initialize subdevice base class instance.\n");
-		kfree(subdevice);
-		return NULL;
-	}
-	// Initialize spin locks.
-	spin_lock_init(&subdevice->subdevice_lock);
-
-	subdevice->ctrl_reg_lock = ctrl_reg_lock;
-
-	/* Save the subdevice index */
-	subdevice->sub_idx = sub_idx;
-
-	/* Override base class methods. */
-	subdevice->base.me_subdevice_destructor = metempl_sub_destructor;
-	subdevice->base.me_subdevice_query_number_channels =
-	    metempl_sub_query_number_channels;
-	subdevice->base.me_subdevice_query_subdevice_type =
-	    metempl_sub_query_subdevice_type;
-	subdevice->base.me_subdevice_query_subdevice_caps =
-	    metempl_sub_query_subdevice_caps;
-
-	return subdevice;
-}
diff --git a/drivers/staging/meilhaus/metempl_sub.h b/drivers/staging/meilhaus/metempl_sub.h
deleted file mode 100644
index 80c8af9..0000000
--- a/drivers/staging/meilhaus/metempl_sub.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/**
- * @file metempl_sub.h
- *
- * @brief Meilhaus subdevice class.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _METEMPL_SUB_H_
-#define _METEMPL_SUB_H_
-
-#include "mesubdevice.h"
-
-#ifdef __KERNEL__
-
-/**
- * @brief The subdevice class.
- */
-typedef struct metempl_sub_subdevice {
-	/* Inheritance */
-	me_subdevice_t base;			/**< The subdevice base class. */
-
-	/* Attributes */
-	spinlock_t subdevice_lock;		/**< Spin lock to protect the subdevice from concurrent access. */
-	spinlock_t *ctrl_reg_lock;		/**< Spin lock to protect #ctrl_reg from concurrent access. */
-	int sub_idx;				/**< The index of the subdevice on the device. */
-
-	unsigned long ctrl_reg;			/**< Register to configure the modes. */
-} metempl_sub_subdevice_t;
-
-/**
- * @brief The constructor to generate a subdevice instance.
- *
- * @param reg_base The register base address of the device as returned by the PCI BIOS.
- * @param sub_idx The index of the subdevice on the device.
- * @param ctrl_reg_lock Pointer to spin lock protecting the control register from concurrent access.
- *
- * @return Pointer to new instance on success.\n
- * NULL on error.
- */
-metempl_sub_subdevice_t *metempl_sub_constructor(uint32_t reg_base,
-						 unsigned int sub_idx,
-						 spinlock_t * ctrl_reg_lock);
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/metempl_sub_reg.h b/drivers/staging/meilhaus/metempl_sub_reg.h
deleted file mode 100644
index 1a2cab7..0000000
--- a/drivers/staging/meilhaus/metempl_sub_reg.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/**
- * @file metempl_sub_reg.h
- *
- * @brief Subdevice register definitions.
- * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- * @author Guenter Gebhardt
- */
-
-/*
- * Copyright (C) 2007 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _METEMPL_SUB_REG_H_
-#define _METEMPL_SUB_REG_H_
-
-#ifdef __KERNEL__
-
-#define METEMPL_PORT_MODE			0x0010		/**< Configuration register. */
-
-#endif
-#endif
diff --git a/drivers/staging/meilhaus/metypes.h b/drivers/staging/meilhaus/metypes.h
deleted file mode 100644
index 228ea15..0000000
--- a/drivers/staging/meilhaus/metypes.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright (C) 2005 Meilhaus Electronic GmbH (support@xxxxxxxxxxx)
- *
- * Source File : metypes.h
- * Author      : GG (Guenter Gebhardt)  <g.gebhardt@xxxxxxxxxxx>
- */
-
-#ifndef _METYPES_H_
-#define _METYPES_H_
-
-
-typedef int (*meErrorCB_t)(char *pcFunctionName, int iErrorCode);
-
-typedef int (*meIOStreamCB_t)(
-		int iDevice,
-		int iSubdevice,
-		int iCount,
-	   	void *pvContext,
-	   	int iErrorCode);
-
-typedef int (*meIOIrqCB_t)(
-		int iDevice,
-	   	int iSubdevice,
-	   	int iChannel,
-		int iIrqCount,
-	   	int iValue,
-	   	void *pvContext,
-	   	int iErrorCode);
-
-
-typedef struct meIOSingle {
-	int iDevice;
-	int iSubdevice;
-	int iChannel;
-	int iDir;
-	int iValue;
-	int iTimeOut;
-	int iFlags;
-	int iErrno;
-} meIOSingle_t;
-
-
-typedef struct meIOStreamConfig {
-	int iChannel;
-	int iStreamConfig;
-	int iRef;
-	int iFlags;
-} meIOStreamConfig_t;
-
-
-typedef struct meIOStreamTrigger {
-	int iAcqStartTrigType;
-	int iAcqStartTrigEdge;
-	int iAcqStartTrigChan;
-	int iAcqStartTicksLow;
-	int iAcqStartTicksHigh;
-	int iAcqStartArgs[10];
-	int iScanStartTrigType;
-	int iScanStartTicksLow;
-	int iScanStartTicksHigh;
-	int iScanStartArgs[10];
-	int iConvStartTrigType;
-	int iConvStartTicksLow;
-	int iConvStartTicksHigh;
-	int iConvStartArgs[10];
-	int iScanStopTrigType;
-	int iScanStopCount;
-	int iScanStopArgs[10];
-	int iAcqStopTrigType;
-	int iAcqStopCount;
-	int iAcqStopArgs[10];
-	int iFlags;
-} meIOStreamTrigger_t;
-
-
-typedef struct meIOStreamStart {
-	int iDevice;
-	int iSubdevice;
-	int iStartMode;
-	int iTimeOut;
-	int iFlags;
-	int iErrno;
-} meIOStreamStart_t;
-
-
-typedef struct meIOStreamStop {
-	int iDevice;
-	int iSubdevice;
-	int iStopMode;
-	int iFlags;
-	int iErrno;
-} meIOStreamStop_t;
-
-
-#endif
-- 
1.6.4.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel