From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/rtl8187se/r8180_hw.h | 314 +---------------------------------
1 files changed, 5 insertions(+), 309 deletions(-)
diff --git a/drivers/staging/rtl8187se/r8180_hw.h b/drivers/staging/rtl8187se/r8180_hw.h
index e09f9a3..db29691 100644
--- a/drivers/staging/rtl8187se/r8180_hw.h
+++ b/drivers/staging/rtl8187se/r8180_hw.h
@@ -29,18 +29,10 @@
#define BIT5 0x00000020
#define BIT6 0x00000040
#define BIT7 0x00000080
-#define BIT8 0x00000100
#define BIT9 0x00000200
-#define BIT10 0x00000400
#define BIT11 0x00000800
-#define BIT12 0x00001000
#define BIT13 0x00002000
-#define BIT14 0x00004000
#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
#define BIT20 0x00100000
#define BIT21 0x00200000
#define BIT22 0x00400000
@@ -57,29 +49,14 @@
#define MAX_SLEEP_TIME (10000)
#define MIN_SLEEP_TIME (50)
-#define BB_ANTATTEN_CHAN14 0x0c
-#define BB_ANTENNA_B 0x40
-
-#define BB_HOST_BANG (1<<30)
#define BB_HOST_BANG_EN (1<<2)
#define BB_HOST_BANG_CLK (1<<1)
-#define BB_HOST_BANG_DATA 1
-
-#define ANAPARAM_TXDACOFF_SHIFT 27
-#define ANAPARAM_PWR0_MASK ((1<<30)|(1<<29)|(1<<28))
-#define ANAPARAM_PWR0_SHIFT 28
-#define ANAPARAM_PWR1_MASK ((1<<26)|(1<<25)|(1<<24)|(1<<23)|(1<<22)|(1<<21)|(1<<20))
-#define ANAPARAM_PWR1_SHIFT 20
#define MAC0 0
-#define MAC1 1
-#define MAC2 2
-#define MAC3 3
#define MAC4 4
-#define MAC5 5
+
#define CMD 0x37
#define CMD_RST_SHIFT 4
-#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7))
#define CMD_RX_ENABLE_SHIFT 3
#define CMD_TX_ENABLE_SHIFT 2
@@ -96,13 +73,9 @@
#define EPROM_W_SHIFT 1
#define EPROM_R_SHIFT 0
#define CONFIG2_DMA_POLLING_MODE_SHIFT 3
-#define INTA 0x3e
+
#define INTA_TXOVERFLOW (1<<15)
#define INTA_TIMEOUT (1<<14)
-#define INTA_BEACONTIMEOUT (1<<13)
-#define INTA_ATIM (1<<12)
-#define INTA_BEACONDESCERR (1<<11)
-#define INTA_BEACONDESCOK (1<<10)
#define INTA_HIPRIORITYDESCERR (1<<9)
#define INTA_HIPRIORITYDESCOK (1<<8)
#define INTA_NORMPRIORITYDESCERR (1<<7)
@@ -111,9 +84,9 @@
#define INTA_RXDESCERR (1<<4)
#define INTA_LOWPRIORITYDESCERR (1<<3)
#define INTA_LOWPRIORITYDESCOK (1<<2)
-#define INTA_RXCRCERR (1<<1)
#define INTA_RXOK (1)
#define INTA_MASK 0x3c
+
#define RXRING_ADDR 0xe4 // page 0
#define PGSELECT 0x5e
#define PGSELECT_PG_SHIFT 0
@@ -131,20 +104,15 @@
#define ACCEPT_MCAST_FRAME_SHIFT 2
#define ACCEPT_ALLMAC_FRAME_SHIFT 0
#define ACCEPT_NICMAC_FRAME_SHIFT 1
+
#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
#define RX_FIFO_THRESHOLD_SHIFT 13
-#define RX_FIFO_THRESHOLD_128 3
-#define RX_FIFO_THRESHOLD_256 4
-#define RX_FIFO_THRESHOLD_512 5
-#define RX_FIFO_THRESHOLD_1024 6
#define RX_FIFO_THRESHOLD_NONE 7
#define RX_AUTORESETPHY_SHIFT 28
-#define EPROM_TYPE_SHIFT 6
+
#define TX_CONF 0x40
#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
#define TX_LOOPBACK_SHIFT 17
-#define TX_LOOPBACK_MAC 1
-#define TX_LOOPBACK_BASEBAND 2
#define TX_LOOPBACK_NONE 0
#define TX_LOOPBACK_CONTINUE 3
#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
@@ -158,21 +126,12 @@
#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
-#define TX_DMA_STOP_BEACON_SHIFT 3
-#define TX_DMA_STOP_HIPRIORITY_SHIFT 2
-#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1
-#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0
#define TX_MANAGEPRIORITY_RING_ADDR 0x0C
#define TX_BKPRIORITY_RING_ADDR 0x10
#define TX_BEPRIORITY_RING_ADDR 0x14
#define TX_VIPRIORITY_RING_ADDR 0x20
#define TX_VOPRIORITY_RING_ADDR 0x24
#define TX_HIGHPRIORITY_RING_ADDR 0x28
-//AC_VI and Low priority share the sane queue
-#define TX_LOWPRIORITY_RING_ADDR TX_VIPRIORITY_RING_ADDR
-//AC_VO and Norm priority share the same queue
-#define TX_NORMPRIORITY_RING_ADDR TX_VOPRIORITY_RING_ADDR
-
#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
#define MAX_RX_DMA_2048 7
#define MAX_RX_DMA_1024 6
@@ -189,11 +148,7 @@
#define ATIM 0x72
#define EPROM_CS_SHIFT 3
#define EPROM_CK_SHIFT 2
-#define PHY_DELAY 0x78
-#define PHY_CONFIG 0x80
#define PHY_ADR 0x7c
-#define PHY_READ 0x7e
-#define CARRIER_SENSE_COUNTER 0x79 //byte
#define SECURITY 0x5f //1209 this is sth wrong
#define SECURITY_WEP_TX_ENABLE_SHIFT 1
#define SECURITY_WEP_RX_ENABLE_SHIFT 0
@@ -214,44 +169,16 @@
* RealTek names are used.
*/
-#define IDR0 0x0000
-#define IDR1 0x0001
-#define IDR2 0x0002
-#define IDR3 0x0003
-#define IDR4 0x0004
-#define IDR5 0x0005
-
-/* 0x0006 - 0x0007 - reserved */
-
-#define MAR0 0x0008
-#define MAR1 0x0009
-#define MAR2 0x000A
-#define MAR3 0x000B
-#define MAR4 0x000C
-#define MAR5 0x000D
-#define MAR6 0x000E
-#define MAR7 0x000F
-
-/* 0x0010 - 0x0017 - reserved */
-
#define TSFTR 0x0018
-#define TSFTR_END 0x001F
#define TLPDA 0x0020
-#define TLPDA_END 0x0023
-#define TNPDA 0x0024
-#define TNPDA_END 0x0027
-#define THPDA 0x0028
-#define THPDA_END 0x002B
#define BSSID 0x002E
-#define BSSID_END 0x0033
#define CR 0x0037
#define RF_SW_CONFIG 0x8 // store data which is transmitted to RF for driver
#define RF_SW_CFG_SI BIT1
-#define PIFS 0x2C // PCF InterFrame Spacing Timer Setting.
#define EIFS 0x2D // Extended InterFrame Space Timer, in unit of 4 us.
#define BRSR 0x34 // Basic rate set
@@ -260,26 +187,16 @@
#define ISR 0x003C
#define TCR 0x0040
-#define TCR_END 0x0043
#define RCR 0x0044
-#define RCR_END 0x0047
#define TimerInt 0x0048
-#define TimerInt_END 0x004B
-
-#define TBDA 0x004C
-#define TBDA_END 0x004F
#define CR9346 0x0050
#define CONFIG0 0x0051
-#define CONFIG1 0x0052
#define CONFIG2 0x0053
-#define ANA_PARM 0x0054
-#define ANA_PARM_END 0x0x0057
-
#define MSR 0x0058
#define CONFIG3 0x0059
@@ -294,37 +211,17 @@
#define TESTR 0x005B
-/* 0x005C - 0x005D - reserved */
-
#define PSR 0x005E
-/* 0x0060 - 0x006F - reserved */
-
#define BcnItv 0x0070
-#define BcnItv_END 0x0071
#define AtimWnd 0x0072
-#define AtimWnd_END 0x0073
#define BintrItv 0x0074
-#define BintrItv_END 0x0075
-
-#define AtimtrItv 0x0076
-#define AtimtrItv_END 0x0077
-
-#define PhyDelay 0x0078
-
-#define CRCount 0x0079
-
-/* 0x007A - 0x007B - reserved */
#define PhyAddr 0x007C
-#define PhyDataW 0x007D
#define PhyDataR 0x007E
-#define PhyCFG 0x0080
-#define PhyCFG_END 0x0083
-
/* following are for rtl8185 */
#define RFPinsOutput 0x80
#define RFPinsEnable 0x82
@@ -356,100 +253,13 @@
#define MAX_RESP_RATE_SHIFT 4
#define MIN_RESP_RATE_SHIFT 0
#define RATE_FALLBACK 0xbe
-/*
- * 0x0084 - 0x00D3 is selected to page 1 when PSEn bit (bit0, PSR)
- * is set to 1
- */
-
-#define Wakeup0 0x0084
-#define Wakeup0_END 0x008B
-
-#define Wakeup1 0x008C
-#define Wakeup1_END 0x0093
-
-#define Wakeup2LD 0x0094
-#define Wakeup2LD_END 0x009B
-#define Wakeup2HD 0x009C
-#define Wakeup2HD_END 0x00A3
-
-#define Wakeup3LD 0x00A4
-#define Wakeup3LD_END 0x00AB
-#define Wakeup3HD 0x00AC
-#define Wakeup3HD_END 0x00B3
-
-#define Wakeup4LD 0x00B4
-#define Wakeup4LD_END 0x00BB
-#define Wakeup4HD 0x00BC
-#define Wakeup4HD_END 0x00C3
-
-#define CRC0 0x00C4
-#define CRC0_END 0x00C5
-#define CRC1 0x00C6
-#define CRC1_END 0x00C7
-#define CRC2 0x00C8
-#define CRC2_END 0x00C9
-#define CRC3 0x00CA
-#define CRC3_END 0x00CB
-#define CRC4 0x00CC
-#define CRC4_END 0x00CD
-
-/* 0x00CE - 0x00D3 - reserved */
-
-
-
-/*
- * 0x0084 - 0x00D3 is selected to page 0 when PSEn bit (bit0, PSR)
- * is set to 0
- */
-
-/* 0x0084 - 0x008F - reserved */
-
-#define DK0 0x0090
-#define DK0_END 0x009F
-#define DK1 0x00A0
-#define DK1_END 0x00AF
-#define DK2 0x00B0
-#define DK2_END 0x00BF
-#define DK3 0x00C0
-#define DK3_END 0x00CF
-
-/* 0x00D0 - 0x00D3 - reserved */
-
-
-
-
-
-/* 0x00D4 - 0x00D7 - reserved */
#define CONFIG5 0x00D8
-#define TPPoll 0x00D9
-
-/* 0x00DA - 0x00DB - reserved */
-
#define PHYPR 0xDA //0xDA - 0x0B PHY Parameter Register.
-#define CWR 0x00DC
-#define CWR_END 0x00DD
-
-#define RetryCTR 0x00DE
-
-/* 0x00DF - 0x00E3 - reserved */
-
-#define RDSAR 0x00E4
-#define RDSAR_END 0x00E7
-
-/* 0x00E8 - 0x00EF - reserved */
-#define LED_CONTROL 0xED
-
-#define FER 0x00F0
-#define FER_END 0x00F3
-
#define FEMR 0x1D4 // Function Event Mask register
-#define FPSR 0x00F8
-#define FPSR_END 0x00FB
-
#define FFER 0x00FC
#define FFER_END 0x00FF
@@ -598,53 +408,10 @@
#define CR9346_EED1 ((1<<1))
#define CR9346_EED0 ((1<<0))
-#define CONFIG0_WEP104 ((1<<6))
-#define CONFIG0_LEDGPO_En ((1<<4))
-#define CONFIG0_Aux_Status ((1<<3))
-#define CONFIG0_GL ((1<<1)|(1<<0))
-#define CONFIG0_GL1 ((1<<1))
-#define CONFIG0_GL0 ((1<<0))
-
-#define CONFIG1_LEDS ((1<<7)|(1<<6))
-#define CONFIG1_LEDS1 ((1<<7))
-#define CONFIG1_LEDS0 ((1<<6))
-#define CONFIG1_LWACT ((1<<4))
-#define CONFIG1_MEMMAP ((1<<3))
-#define CONFIG1_IOMAP ((1<<2))
-#define CONFIG1_VPD ((1<<1))
-#define CONFIG1_PMEn ((1<<0))
-
-#define CONFIG2_LCK ((1<<7))
-#define CONFIG2_ANT ((1<<6))
-#define CONFIG2_DPS ((1<<3))
-#define CONFIG2_PAPE_sign ((1<<2))
-#define CONFIG2_PAPE_time ((1<<1)|(1<<0))
-#define CONFIG2_PAPE_time1 ((1<<1))
-#define CONFIG2_PAPE_time0 ((1<<0))
-
-#define CONFIG3_GNTSel ((1<<7))
#define CONFIG3_PARM_En ((1<<6))
-#define CONFIG3_Magic ((1<<5))
-#define CONFIG3_CardB_En ((1<<3))
-#define CONFIG3_CLKRUN_En ((1<<2))
#define CONFIG3_FuncRegEn ((1<<1))
-#define CONFIG3_FBtbEn ((1<<0))
-#define CONFIG4_VCOPDN ((1<<7))
-#define CONFIG4_PWROFF ((1<<6))
#define CONFIG4_PWRMGT ((1<<5))
-#define CONFIG4_LWPME ((1<<4))
-#define CONFIG4_LWPTN ((1<<2))
-#define CONFIG4_RFTYPE ((1<<1)|(1<<0))
-#define CONFIG4_RFTYPE1 ((1<<1))
-#define CONFIG4_RFTYPE0 ((1<<0))
-
-#define CONFIG5_TX_FIFO_OK ((1<<7))
-#define CONFIG5_RX_FIFO_OK ((1<<6))
-#define CONFIG5_CALON ((1<<5))
-#define CONFIG5_EACPI ((1<<2))
-#define CONFIG5_LANWake ((1<<1))
-#define CONFIG5_PME_STS ((1<<0))
#define MSR_LINK_MASK ((1<<2)|(1<<3))
#define MSR_LINK_MANAGED 2
@@ -653,50 +420,16 @@
#define MSR_LINK_ADHOC 1
#define MSR_LINK_MASTER 3
-#define PSR_GPO ((1<<7))
-#define PSR_GPI ((1<<6))
-#define PSR_LEDGPO1 ((1<<5))
-#define PSR_LEDGPO0 ((1<<4))
-#define PSR_UWF ((1<<1))
-#define PSR_PSEn ((1<<0))
-
-#define SCR_KM ((1<<5)|(1<<4))
-#define SCR_KM1 ((1<<5))
-#define SCR_KM0 ((1<<4))
-#define SCR_TXSECON ((1<<1))
-#define SCR_RXSECON ((1<<0))
-
#define BcnItv_BcnItv (0x01FF)
#define AtimWnd_AtimWnd (0x01FF)
#define BintrItv_BintrItv (0x01FF)
-#define AtimtrItv_AtimtrItv (0x01FF)
-
-#define PhyDelay_PhyDelay ((1<<2)|(1<<1)|(1<<0))
-
-#define TPPoll_BQ ((1<<7))
-#define TPPoll_HPQ ((1<<6))
-#define TPPoll_NPQ ((1<<5))
-#define TPPoll_LPQ ((1<<4))
-#define TPPoll_SBQ ((1<<3))
-#define TPPoll_SHPQ ((1<<2))
-#define TPPoll_SNPQ ((1<<1))
-#define TPPoll_SLPQ ((1<<0))
-
-#define CWR_CW (0x01FF)
-
-#define FER_INTR ((1<<15))
-#define FER_GWAKE ((1<< 4))
-
#define FEMR_INTR ((1<<15))
#define FEMR_WKUP ((1<<14))
#define FEMR_GWAKE ((1<< 4))
-#define FPSR_INTR ((1<<15))
-#define FPSR_GWAKE ((1<< 4))
-
#define FFER_INTR ((1<<15))
#define FFER_GWAKE ((1<< 4))
@@ -716,17 +449,6 @@
#define RCR_MXDMA_OFFSET 8
#define RCR_FIFO_OFFSET 13
-#define TMGDS 0x0C // Tx Management Descriptor Address
-#define TBKDS 0x10 // Tx AC_BK Descriptor Address
-#define TBEDS 0x14 // Tx AC_BE Descriptor Address
-#define TLPDS 0x20 // Tx AC_VI Descriptor Address
-#define TNPDS 0x24 // Tx AC_VO Descriptor Address
-#define THPDS 0x28 // Tx Hign Priority Descriptor Address
-
-#define TBDS 0x4c // Beacon descriptor queue start address
-
-#define RDSA 0xE4 // Receive descriptor queue start address
-
#define AckTimeOutReg 0x79 // ACK timeout register, in unit of 4 us.
#define RFTiming 0x8C
@@ -740,8 +462,6 @@
#define ACM_CONTROL 0x00BF // ACM Control Registe
-#define RTL8185B_VER_REG 0xE1
-
#define IntMig 0xE2 // Interrupt Migration (0xE2 ~ 0xE3)
#define TID_AC_MAP 0xE8 // TID to AC Mapping Register
@@ -753,9 +473,7 @@
#define AC_BE_PARAM 0xF8 // AC_BE Parameters Record
#define AC_BK_PARAM 0xFC // AC_BK Parameters Record
-#define BcnTimingAdjust 0x16A // Beacon Timing Adjust Register.
#define GPIOCtrl 0x16B // GPIO Control Register.
-#define PSByGC 0x180 // 0x180 - 0x183 Power Saving by Gated Clock.
#define ARFR 0x1E0 // Auto Rate Fallback Register (0x1e0 ~ 0x1e2)
#define RFSW_CTRL 0x272 // 0x272-0x273.
@@ -768,27 +486,10 @@
#define SI_DATA_READ 0x362 // 0x362 - 0x363 Serial Interface Data Register.
//----------------------------------------------------------------------------
-// 8185B TPPoll bits (offset 0xd9, 1 byte)
-//----------------------------------------------------------------------------
-#define TPPOLL_BQ (0x01 << 7)
-#define TPPOLL_HPQ (0x01 << 6)
-#define TPPOLL_AC_VOQ (0x01 << 5)
-#define TPPOLL_AC_VIQ (0x01 << 4)
-#define TPPOLL_AC_BEQ (0x01 << 3)
-#define TPPOLL_AC_BKQ (0x01 << 2)
-#define TPPOLL_AC_MGQ (0x01 << 1)
-
-//----------------------------------------------------------------------------
// 8185B TPPollStop bits (offset 0x93, 1 byte)
//----------------------------------------------------------------------------
#define TPPOLLSTOP_BQ (0x01 << 7)
-#define TPPOLLSTOP_HPQ (0x01 << 6)
-#define TPPOLLSTOP_AC_VOQ (0x01 << 5)
#define TPPOLLSTOP_AC_VIQ (0x01 << 4)
-#define TPPOLLSTOP_AC_BEQ (0x01 << 3)
-#define TPPOLLSTOP_AC_BKQ (0x01 << 2)
-#define TPPOLLSTOP_AC_MGQ (0x01 << 1)
-
#define MSR_LINK_ENEDCA (1<<4)
@@ -807,7 +508,6 @@
#define VIQ_ACM_EN (0x01 << 6) //BIT6
#define BEQ_ACM_EN (0x01 << 5) //BIT5
#define ACM_HW_EN (0x01 << 4) //BIT4
-#define TXOPSEL (0x01 << 3) //BIT3
#define VOQ_ACM_CTL (0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time
#define VIQ_ACM_CTL (0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time
#define BEQ_ACM_CTL (0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time
@@ -838,7 +538,6 @@
#define RTL8225z2_ANAPARAM_OFF 0x55480658
#define RTL8225z2_ANAPARAM2_OFF 0x72003f70
//by amy for power save
-#define RF_CHANGE_BY_SW BIT31
#define RF_CHANGE_BY_HW BIT30
#define RF_CHANGE_BY_PS BIT29
#define RF_CHANGE_BY_IPS BIT28
@@ -856,18 +555,15 @@
//{by amy 080312
//0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10.
#define EEPROM_RSV 0x7C
-#define EEPROM_XTAL_CAL_MASK 0x00FF // 0x7C[7:0], Crystal calibration mask.
#define EEPROM_XTAL_CAL_XOUT_MASK 0x0F // 0x7C[3:0], Crystal calibration for Xout.
#define EEPROM_XTAL_CAL_XIN_MASK 0xF0 // 0x7C[7:4], Crystal calibration for Xin.
#define EEPROM_THERMAL_METER_MASK 0x0F00 // 0x7D[3:0], Thermal meter reference level.
#define EEPROM_XTAL_CAL_ENABLE 0x1000 // 0x7D[4], Crystal calibration enabled/disabled BIT.
#define EEPROM_THERMAL_METER_ENABLE 0x2000 // 0x7D[5], Thermal meter enabled/disabled BIT.
-#define EEPROM_CID_RSVD1 0x3F
#define EN_LPF_CAL 0x238 // Enable LPF Calibration.
#define PWR_METER_EN BIT1
// <RJ_TODO_8185B> where are false alarm counters in 8185B?
#define CCK_FALSE_ALARM 0xD0
-#define OFDM_FALSE_ALARM 0xD2
//by amy 080312}
//YJ,add for Country IE, 080630
--
1.6.4.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
