Hi folks, Here's our status report for Project-002. Thanks, jaya --- Project 002. Summary: USB FXO+FXS VOIP device Status: Abandoned: Project initiator switched to Linux compatible device. Post-mortem: The original goal was to implement full Linux support for the SAS0 VOIP Adapter from Polypower [1] and/or the Voxelle TLink Personal VoIP Gateway Solution [2], most likely believed to be both based on a Smartlink chipset. [1] http://www.polypower.com.tw/product-page/SAS0.html [2] http://www.smlink.com/emall/content.asp?cc=66996&id=49031&fid=7254 - SAS0 is a USB device with both an FXO and an FXS port. Carlos Doria mentioned that the SAS0 uses a Smartlink chipset and that this chipset was supported by the Au600 driver but there were problems in testing. The project initiator did not have chipset specs. The Au600 driver author, Markus Rechberger had stated that he had to reverse engineer much of it to implement the Au600 driver. - We asked the project initiator to request chipset specifications from the product supplier. - In the mean-time, the product supplier discontinued the product and thus the project initiator switched to another product that did not need driver support. What-we-would-have-done-differently: - We should have asked the project initiator to send hardware first rather than wait for chipset specifications. :-) At least then, we would have been able to evaluate the device more concretely and contribute if possible to the Au600 driver.
