From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx> Add the HWMON driver for DA9063 Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@xxxxxxxxxxx> Simplify and modernise the code a bit. Fix logic inversion in detecting conversion end. Drop support for ADCIN: these are multi-purpose channels and must not be reconfigured unless explicitly authorised by the board description. Signed-off-by: Vincent Pelletier <plr.vincent@xxxxxxxxx> --- Changes in v2: - drop of_match_table: this should be meaningless in such sub-function driver (at least judging by other sub-function drivers for the da9063) - sort includes - switch to devm_hwmon_device_register_with_info - registers.h changes moved to patch 1 - add SPDX header This patch depends on patch 1/3. Originally submitted by Steve Twiss in 2014: https://marc.info/?l=linux-kernel&m=139560868309857&w=2 drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/da9063-hwmon.c | 275 +++++++++++++++++++++++++++++++++++ 3 files changed, 286 insertions(+) create mode 100644 drivers/hwmon/da9063-hwmon.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 87624902ea80..17244cfaa855 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -515,6 +515,16 @@ config SENSORS_DA9055 This driver can also be built as a module. If so, the module will be called da9055-hwmon. +config SENSORS_DA9063 + tristate "Dialog Semiconductor DA9063" + depends on MFD_DA9063 + help + If you say yes here you get support for the hardware + monitoring features of the DA9063 Power Management IC. + + This driver can also be built as a module. If so, the module + will be called da9063-hwmon. + config SENSORS_I5K_AMB tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 59e78bc212cf..6855711ed9ec 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o obj-$(CONFIG_SENSORS_CORSAIR_PSU) += corsair-psu.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o +obj-$(CONFIG_SENSORS_DA9063) += da9063-hwmon.o obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o obj-$(CONFIG_SENSORS_DRIVETEMP) += drivetemp.o diff --git a/drivers/hwmon/da9063-hwmon.c b/drivers/hwmon/da9063-hwmon.c new file mode 100644 index 000000000000..f020be5d5d6b --- /dev/null +++ b/drivers/hwmon/da9063-hwmon.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* da9063-hwmon.c - Hardware monitor support for DA9063 + * Copyright (C) 2014 Dialog Semiconductor Ltd. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mfd/da9063/core.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/string.h> + +#define DA9063_ADC_RES (1 << (DA9063_ADC_RES_L_BITS + DA9063_ADC_RES_M_BITS)) +#define DA9063_ADC_MAX (DA9063_ADC_RES - 1) +#define DA9063_2V5 2500 +#define DA9063_5V0 5000 +#define DA9063_5V5 5500 +#define DA9063_TJUNC_M -398 +#define DA9063_TJUNC_O 330000 +#define DA9063_VBBAT_M 2048 + +enum da9063_adc { + DA9063_CHAN_VSYS = DA9063_ADC_MUX_VSYS, + DA9063_CHAN_ADCIN1 = DA9063_ADC_MUX_ADCIN1, + DA9063_CHAN_ADCIN2 = DA9063_ADC_MUX_ADCIN2, + DA9063_CHAN_ADCIN3 = DA9063_ADC_MUX_ADCIN3, + DA9063_CHAN_TJUNC = DA9063_ADC_MUX_T_SENSE, + DA9063_CHAN_VBBAT = DA9063_ADC_MUX_VBBAT, + DA9063_CHAN_LDO_G1 = DA9063_ADC_MUX_LDO_G1, + DA9063_CHAN_LDO_G2 = DA9063_ADC_MUX_LDO_G2, + DA9063_CHAN_LDO_G3 = DA9063_ADC_MUX_LDO_G3 +}; + +struct da9063_hwmon { + struct da9063 *da9063; + struct mutex hwmon_mutex; + struct completion adc_ready; + signed char tjunc_offset; +}; + +static int da9063_adc_manual_read(struct da9063_hwmon *hwmon, int channel) +{ + int ret; + unsigned char val; + unsigned char data[2]; + int adc_man; + + mutex_lock(&hwmon->hwmon_mutex); + + init_completion(&hwmon->adc_ready); + + val = (channel & DA9063_ADC_MUX_MASK) | DA9063_ADC_MAN; + ret = regmap_update_bits(hwmon->da9063->regmap, DA9063_REG_ADC_MAN, + DA9063_ADC_MUX_MASK | DA9063_ADC_MAN, val); + if (ret < 0) + goto err_mread; + + ret = wait_for_completion_timeout(&hwmon->adc_ready, + msecs_to_jiffies(1000)); + if (ret == 0) { + ret = -ETIMEDOUT; + goto err_mread; + } + + ret = regmap_read(hwmon->da9063->regmap, DA9063_REG_ADC_MAN, &adc_man); + if (ret < 0) + goto err_mread; + + /* data value is not ready */ + if (adc_man & DA9063_ADC_MAN) { + ret = -EINVAL; + goto err_mread; + } + + ret = regmap_bulk_read(hwmon->da9063->regmap, + DA9063_REG_ADC_RES_L, data, 2); + if (ret < 0) + goto err_mread; + + ret = (data[0] & DA9063_ADC_RES_L_MASK) >> DA9063_ADC_RES_L_SHIFT; + ret |= data[1] << DA9063_ADC_RES_L_BITS; +err_mread: + mutex_unlock(&hwmon->hwmon_mutex); + return ret; +} + +static irqreturn_t da9063_hwmon_irq_handler(int irq, void *irq_data) +{ + struct da9063_hwmon *hwmon = irq_data; + + complete(&hwmon->adc_ready); + return IRQ_HANDLED; +} + +static umode_t da9063_is_visible(const void *drvdata, enum + hwmon_sensor_types type, u32 attr, int channel) +{ + return 0444; +} + +static const enum da9063_adc da9063_in_index[] = { + DA9063_CHAN_VSYS, DA9063_CHAN_VBBAT +}; + +static const enum da9063_adc da9063_temp_index[] = { + DA9063_CHAN_TJUNC +}; + +static int da9063_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct da9063_hwmon *hwmon = dev_get_drvdata(dev); + enum da9063_adc adc_channel; + int tmp; + + switch (type) { + case hwmon_in: + if (attr != hwmon_in_input) + return -EOPNOTSUPP; + adc_channel = da9063_in_index[channel]; + break; + case hwmon_temp: + if (attr != hwmon_temp_input) + return -EOPNOTSUPP; + adc_channel = da9063_temp_index[channel]; + break; + default: + return -EOPNOTSUPP; + } + + tmp = da9063_adc_manual_read(hwmon, adc_channel); + if (tmp < 0) + return tmp; + + switch (adc_channel) { + case DA9063_CHAN_VSYS: + *val = ((DA9063_5V5 - DA9063_2V5) * tmp) / DA9063_ADC_MAX + + DA9063_2V5; + break; + case DA9063_CHAN_TJUNC: + tmp -= hwmon->tjunc_offset; + *val = DA9063_TJUNC_M * tmp + DA9063_TJUNC_O; + break; + case DA9063_CHAN_VBBAT: + *val = (DA9063_5V0 * tmp) / DA9063_ADC_MAX; + break; + default: + return -EINVAL; + } + + return 0; +} + +static const char * const da9063_in_name[] = { + "VSYS", "VBBAT" +}; + +static const char * const da9063_temp_name[] = { + "TJUNC" +}; + +static int da9063_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + switch (type) { + case hwmon_in: + if (attr != hwmon_in_label) + return -EOPNOTSUPP; + *str = da9063_in_name[channel]; + break; + case hwmon_temp: + if (attr != hwmon_temp_label) + return -EOPNOTSUPP; + *str = da9063_temp_name[channel]; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static const struct hwmon_ops da9063_ops = { + .is_visible = da9063_is_visible, + .read = da9063_read, + .read_string = da9063_read_string, +}; + +static const struct hwmon_channel_info *da9063_channel_info[] = { + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_LABEL), + NULL +}; + +static const struct hwmon_chip_info da9063_chip_info = { + .ops = &da9063_ops, + .info = da9063_channel_info, +}; + +static int da9063_hwmon_probe(struct platform_device *pdev) +{ + struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent); + struct da9063_hwmon *hwmon; + struct device *hwmon_dev; + int irq; + int ret; + + hwmon = devm_kzalloc(&pdev->dev, sizeof(struct da9063_hwmon), + GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + mutex_init(&hwmon->hwmon_mutex); + init_completion(&hwmon->adc_ready); + hwmon->da9063 = da9063; + + irq = platform_get_irq_byname(pdev, DA9063_DRVNAME_HWMON); + if (irq < 0) + return irq; + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + da9063_hwmon_irq_handler, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "HWMON", hwmon); + if (ret) { + dev_err(&pdev->dev, "Failed to request IRQ.\n"); + return ret; + } + + platform_set_drvdata(pdev, hwmon); + + /* set trim temperature offset to value read at startup */ + hwmon->tjunc_offset = (signed char)hwmon->da9063->t_offset; + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "da9063", + hwmon, + &da9063_chip_info, + NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static struct platform_driver da9063_hwmon_driver = { + .probe = da9063_hwmon_probe, + .driver = { + .name = DA9063_DRVNAME_HWMON, + }, +}; +module_platform_driver(da9063_hwmon_driver); + +MODULE_DESCRIPTION("Hardware monitor support device driver for Dialog DA9063"); +MODULE_AUTHOR("S Twiss <stwiss.opensource@xxxxxxxxxxx>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DA9063_DRVNAME_HWMON); -- 2.32.0
