On 7/2/21 12:31 AM, ainux.wang@xxxxxxxxx wrote:
From: "Ainux.Wang" <ainux.wang@xxxxxxxxx>
Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS).
This is a triple-loop, digital, multi-phase controller.
This device:
- Supports up to three power rail.
- Provides 6 pulse-width modulations (PWMs), and can be configured up
to 6-phase operation for Rail A , up to 2-phase operation for Rail B
and up to 1-phase operation for Rail C.
- The PMBus registers are distributed into three pages: Page 0, Page 1,
Page 2. Page 0 contains the registers for Rail A and most of the common
settings for all of the rails. Page 1 contains register information for
Rail B. Page 2 contains register information for Rail C.
- The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and
IMVP9.
Signed-off-by: Ainux.Wang <ainux.wang@xxxxxxxxx>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/mp2949a.rst | 44 +++++++++++
drivers/hwmon/pmbus/Kconfig | 9 +++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/mp2949a.c | 136 ++++++++++++++++++++++++++++++++
5 files changed, 191 insertions(+)
create mode 100644 Documentation/hwmon/mp2949a.rst
create mode 100644 drivers/hwmon/pmbus/mp2949a.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index bc01601ea81a..e62161c0f01e 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -138,6 +138,7 @@ Hardware Monitoring Kernel Drivers
mcp3021
menf21bmc
mlxreg-fan
+ mp2949a
mp2888
mp2975
nct6683
diff --git a/Documentation/hwmon/mp2949a.rst b/Documentation/hwmon/mp2949a.rst
new file mode 100644
index 000000000000..0235dec70f63
--- /dev/null
+++ b/Documentation/hwmon/mp2949a.rst
@@ -0,0 +1,44 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp2949a
+====================
+
+Supported chips:
+
+ * MPS MP2949A
+
+ Prefix: 'mp2949a'
+
+Author:
+
+ Ainux Wang <ainux.wang@xxxxxxxxx>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+triple-loop, digital, multi-phase controller MP2949A.
+
+This device:
+
+- Supports up to three power rail.
+- Provides 6 pulse-width modulations (PWMs), and can be configured for
+ to 6-phase operation for Rail A , up to 2-phase operation for Rail B,
+ and up to 1-phase operation for Rail C.
+- The PMBus registers are distributed into three pages: Page 0, Page 1,
+ Page 2. Page 0 contains the registers for Rail A and most of the common
+ settings for all of the rails. Page 1 contains register information for
+ Rail B. Page 2 contains register information for Rail C.
+- The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and
+ IMVP9.
+
+Device supports:
+
+- SVID interface.
+- PMBus rev 1.2 interface.
+
+Device supports direct format for reading output power.
+Device supports linear format for reading input voltage, output current,
+and temperature.
+Device supports VID for reading output voltage.
+The below VID modes are supported: VR12, VR13, IMVP8, IMVP9.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index ffb609cee3a4..d3a521bead3e 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -258,6 +258,15 @@ config SENSORS_MAX8688
This driver can also be built as a module. If so, the module will
be called max8688.
+config SENSORS_MP2949A
+ tristate "MPS MP2949A"
+ help
+ If you say yes here you get hardware monitoring support for MPS
+ MP2949A Triple Loop Digital Multi-Phase Controller.
+
+ This driver can also be built as a module. If so, the module will
+ be called mp2949a.
+
config SENSORS_MP2888
tristate "MPS MP2888"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 0ed4d596a948..bfdfb599c8ba 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
+obj-$(CONFIG_SENSORS_MP2949A) += mp2949a.o
obj-$(CONFIG_SENSORS_MP2888) += mp2888.o
obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
diff --git a/drivers/hwmon/pmbus/mp2949a.c b/drivers/hwmon/pmbus/mp2949a.c
new file mode 100644
index 000000000000..8f8dd3235298
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp2949a.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Monolithic Power Systems MP2949A
+ *
+ * Copyright (c) 2021 Lemote Technologies. All rights reserved.
+ * Copyright (c) 2021 Ainux <ainux.wang@xxxxxxxxx>
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define MP2949A_PAGE_NUM 3
+
+#define MP2949A_MFR_VR_CONFIG 0xE4
+
+static int mp2949a_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ switch (reg) {
+ /*
+ * This chip do not support the VOUT_MODE, STATUS_BYTE command,
+ * but return some random data when reading.
+ */
+ case PMBUS_VOUT_MODE:
+ case PMBUS_STATUS_BYTE:
+ return -ENXIO;
+ default:
+ return -ENODATA;
+ }
+}
+
+static int mp2949a_read_word_data(struct i2c_client *client, int page,
+ int phase, int reg)
+{
+
+ switch (reg) {
+ /*
+ * This chip do not support STATUS_WORD command,
+ * but return some random data when reading.
+ */
+ case PMBUS_STATUS_WORD:
+ return -ENXIO;
One of the status registers should be simulated. See other patch
for details.
+ default:
+ return -ENODATA;
+ }
+}
+
+static int mp2949a_identify(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ int i, ret;
+
+ for (i = 0; i < MP2949A_PAGE_NUM; i++) {
+ ret = pmbus_read_byte_data(client, i, MP2949A_MFR_VR_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Rail A bit 5, Rail B bit 4, Rail C bit 3.
+ * 1'b1: 5mV (vr12/imvp8)
+ * 1'b0: 10mv (imvp9)
+ */
+ info->vrm_version[i] = (ret & BIT(5 - i)) ? vr12 : imvp9;
+ }
+
+ return 0;
+}
+
+static struct pmbus_driver_info mp2949a_info = {
+ .pages = MP2949A_PAGE_NUM,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = vid,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_POWER] = direct,
+ .m[PSC_POWER] = 1,
+ .b[PSC_POWER] = 0,
+ .R[PSC_POWER] = 0,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT,
+ .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_POUT,
+ .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_POUT,
+ .identify = mp2949a_identify,
+ .read_byte_data = mp2949a_read_byte_data,
+ .read_word_data = mp2949a_read_word_data,
+};
+
+static int mp2949a_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pmbus_driver_info *info;
+
+ info = devm_kmemdup(&client->dev, &mp2949a_info, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id mp2949a_id[] = {
+ {"mp2949a", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, mp2949a_id);
+
+static const struct of_device_id mp2949a_of_match[] = {
+ {.compatible = "mps,mp2949a"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, mp2949a_of_match);
+
+static struct i2c_driver mp2949a_driver = {
+ .driver = {
+ .name = "mp2949a",
+ .of_match_table = of_match_ptr(mp2949a_of_match),
+ },
+ .probe = mp2949a_probe,
+ .id_table = mp2949a_id,
+};
+
+module_i2c_driver(mp2949a_driver);
+
+MODULE_AUTHOR("Ainux <ainux.wang@xxxxxxxxx>");
+MODULE_DESCRIPTION("PMBus driver for Monolithic Power Systems MP2949A");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
