From: Vladimir Oltean <vladimir.oltean@xxxxxxx> Mention support for the SJA1110 in menuconfig. Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx> --- drivers/net/dsa/sja1105/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig index 8383cd6d2178..b29d41e5e1e7 100644 --- a/drivers/net/dsa/sja1105/Kconfig +++ b/drivers/net/dsa/sja1105/Kconfig @@ -7,8 +7,8 @@ tristate "NXP SJA1105 Ethernet switch family support" select PACKING select CRC32 help - This is the driver for the NXP SJA1105 automotive Ethernet switch - family. These are 5-port devices and are managed over an SPI + This is the driver for the NXP SJA1105 (5-port) and SJA1110 (10-port) + automotive Ethernet switch family. These are managed over an SPI interface. Probing is handled based on OF bindings and so is the linkage to PHYLINK. The driver supports the following revisions: - SJA1105E (Gen. 1, No TT-Ethernet) @@ -17,6 +17,10 @@ tristate "NXP SJA1105 Ethernet switch family support" - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet) - SJA1105R (Gen. 2, SGMII, No TT-Ethernet) - SJA1105S (Gen. 2, SGMII, TT-Ethernet) + - SJA1110A (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 10 ports) + - SJA1110B (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 9 ports) + - SJA1110C (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 7 ports) + - SJA1110D (Gen. 3, SGMII, TT-Ethernet, no 100base-TX PHY, 7 ports) config NET_DSA_SJA1105_PTP bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch" -- 2.25.1
