The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> --- Documentation/driver-api/usb/dma.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/driver-api/usb/dma.rst b/Documentation/driver-api/usb/dma.rst index 2b3dbd3265b4..d32c27e11b90 100644 --- a/Documentation/driver-api/usb/dma.rst +++ b/Documentation/driver-api/usb/dma.rst @@ -10,7 +10,7 @@ API overview The big picture is that USB drivers can continue to ignore most DMA issues, though they still must provide DMA-ready buffers (see -:doc:`/core-api/dma-api-howto`). That's how they've worked through +Documentation/core-api/dma-api-howto.rst). That's how they've worked through the 2.4 (and earlier) kernels, or they can now be DMA-aware. DMA-aware usb drivers: @@ -60,7 +60,7 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - :doc:`/core-api/dma-api-howto` for definitions of "coherent" and + Documentation/core-api/dma-api-howto.rst for definitions of "coherent" and "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably @@ -91,7 +91,7 @@ Working with existing buffers Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of :doc:`/core-api/dma-api-howto`, titled "What memory is DMA-able?") +of Documentation/core-api/dma-api-howto.rst, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single -- 2.31.1
