From: Dom Cobley <popcornmix@xxxxxxxxx>
This was a workaround for bugs in hardware on earlier Pi models
and wasn't totally successful.
It makes audio quality worse on a Pi4 at the higher sample rates
Signed-off-by: Dom Cobley <popcornmix@xxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0cf9949a749f..b7e3bd89e237 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1269,22 +1269,12 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
audio_packet_config |= VC4_SET_FIELD(channel_mask,
VC4_HDMI_AUDIO_PACKET_CEA_MASK);
- /* Set the MAI threshold. This logic mimics the firmware's. */
- if (vc4_hdmi->audio.samplerate > 96000) {
- HDMI_WRITE(HDMI_MAI_THR,
- VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQHIGH) |
- VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
- } else if (vc4_hdmi->audio.samplerate > 48000) {
- HDMI_WRITE(HDMI_MAI_THR,
- VC4_SET_FIELD(0x14, VC4_HD_MAI_THR_DREQHIGH) |
- VC4_SET_FIELD(0x12, VC4_HD_MAI_THR_DREQLOW));
- } else {
- HDMI_WRITE(HDMI_MAI_THR,
- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
- VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
- }
+ /* Set the MAI threshold */
+ HDMI_WRITE(HDMI_MAI_THR,
+ VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICHIGH) |
+ VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_PANICLOW) |
+ VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQHIGH) |
+ VC4_SET_FIELD(0x10, VC4_HD_MAI_THR_DREQLOW));
HDMI_WRITE(HDMI_MAI_CONFIG,
VC4_HDMI_MAI_CONFIG_BIT_REVERSE |
--
2.31.1
