[PATCH v27 06/31] x86/cet: Add control-protection fault handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A control-protection fault is triggered when a control-flow transfer
attempt violates Shadow Stack or Indirect Branch Tracking constraints.
For example, the return address for a RET instruction differs from the copy
on the shadow stack; or an indirect JMP instruction, without the NOTRACK
prefix, arrives at a non-ENDBR opcode.

The control-protection fault handler works in a similar way as the general
protection fault handler.  It provides the si_code SEGV_CPERR to the signal
handler.

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: Michael Kerrisk <mtk.manpages@xxxxxxxxx>
---
v25:
- Change CONFIG_X86_CET to CONFIG_X86_SHADOW_STACK.
- Change X86_FEATURE_CET to X86_FEATURE_SHSTK.

 arch/x86/include/asm/idtentry.h    |  4 ++
 arch/x86/kernel/idt.c              |  4 ++
 arch/x86/kernel/signal_compat.c    |  2 +-
 arch/x86/kernel/traps.c            | 63 ++++++++++++++++++++++++++++++
 include/uapi/asm-generic/siginfo.h |  3 +-
 5 files changed, 74 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h
index 73d45b0dfff2..74366706c994 100644
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -571,6 +571,10 @@ DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_SS,	exc_stack_segment);
 DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_GP,	exc_general_protection);
 DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_AC,	exc_alignment_check);
 
+#ifdef CONFIG_X86_SHADOW_STACK
+DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_CP, exc_control_protection);
+#endif
+
 /* Raw exception entries which need extra work */
 DECLARE_IDTENTRY_RAW(X86_TRAP_UD,		exc_invalid_op);
 DECLARE_IDTENTRY_RAW(X86_TRAP_BP,		exc_int3);
diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c
index d552f177eca0..bddeeb88b416 100644
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -105,6 +105,10 @@ static const __initconst struct idt_data def_idts[] = {
 #elif defined(CONFIG_X86_32)
 	SYSG(IA32_SYSCALL_VECTOR,	entry_INT80_32),
 #endif
+
+#ifdef CONFIG_X86_SHADOW_STACK
+	INTG(X86_TRAP_CP,		asm_exc_control_protection),
+#endif
 };
 
 /*
diff --git a/arch/x86/kernel/signal_compat.c b/arch/x86/kernel/signal_compat.c
index 0e5d0a7e203b..8788484bef1f 100644
--- a/arch/x86/kernel/signal_compat.c
+++ b/arch/x86/kernel/signal_compat.c
@@ -27,7 +27,7 @@ static inline void signal_compat_build_tests(void)
 	 */
 	BUILD_BUG_ON(NSIGILL  != 11);
 	BUILD_BUG_ON(NSIGFPE  != 15);
-	BUILD_BUG_ON(NSIGSEGV != 9);
+	BUILD_BUG_ON(NSIGSEGV != 10);
 	BUILD_BUG_ON(NSIGBUS  != 5);
 	BUILD_BUG_ON(NSIGTRAP != 6);
 	BUILD_BUG_ON(NSIGCHLD != 6);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 853ea7a80806..52f7d23d96e6 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -39,6 +39,7 @@
 #include <linux/io.h>
 #include <linux/hardirq.h>
 #include <linux/atomic.h>
+#include <linux/nospec.h>
 
 #include <asm/stacktrace.h>
 #include <asm/processor.h>
@@ -607,6 +608,68 @@ DEFINE_IDTENTRY_ERRORCODE(exc_general_protection)
 	cond_local_irq_disable(regs);
 }
 
+#ifdef CONFIG_X86_SHADOW_STACK
+static const char * const control_protection_err[] = {
+	"unknown",
+	"near-ret",
+	"far-ret/iret",
+	"endbranch",
+	"rstorssp",
+	"setssbsy",
+	"unknown",
+};
+
+static DEFINE_RATELIMIT_STATE(cpf_rate, DEFAULT_RATELIMIT_INTERVAL,
+			      DEFAULT_RATELIMIT_BURST);
+
+/*
+ * When a control protection exception occurs, send a signal to the responsible
+ * application.  Currently, control protection is only enabled for user mode.
+ * This exception should not come from kernel mode.
+ */
+DEFINE_IDTENTRY_ERRORCODE(exc_control_protection)
+{
+	struct task_struct *tsk;
+
+	if (!user_mode(regs)) {
+		pr_emerg("PANIC: unexpected kernel control protection fault\n");
+		die("kernel control protection fault", regs, error_code);
+		panic("Machine halted.");
+	}
+
+	cond_local_irq_enable(regs);
+
+	if (!boot_cpu_has(X86_FEATURE_SHSTK))
+		WARN_ONCE(1, "Control protection fault with CET support disabled\n");
+
+	tsk = current;
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_nr = X86_TRAP_CP;
+
+	/*
+	 * Ratelimit to prevent log spamming.
+	 */
+	if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+	    __ratelimit(&cpf_rate)) {
+		unsigned long ssp;
+		int cpf_type;
+
+		cpf_type = array_index_nospec(error_code, ARRAY_SIZE(control_protection_err));
+
+		rdmsrl(MSR_IA32_PL3_SSP, ssp);
+		pr_emerg("%s[%d] control protection ip:%lx sp:%lx ssp:%lx error:%lx(%s)",
+			 tsk->comm, task_pid_nr(tsk),
+			 regs->ip, regs->sp, ssp, error_code,
+			 control_protection_err[cpf_type]);
+		print_vma_addr(KERN_CONT " in ", regs->ip);
+		pr_cont("\n");
+	}
+
+	force_sig_fault(SIGSEGV, SEGV_CPERR, (void __user *)0);
+	cond_local_irq_disable(regs);
+}
+#endif
+
 static bool do_int3(struct pt_regs *regs)
 {
 	int res;
diff --git a/include/uapi/asm-generic/siginfo.h b/include/uapi/asm-generic/siginfo.h
index 03d6f6d2c1fe..020badf91ea4 100644
--- a/include/uapi/asm-generic/siginfo.h
+++ b/include/uapi/asm-generic/siginfo.h
@@ -234,7 +234,8 @@ typedef struct siginfo {
 #define SEGV_ADIPERR	7	/* Precise MCD exception */
 #define SEGV_MTEAERR	8	/* Asynchronous ARM MTE error */
 #define SEGV_MTESERR	9	/* Synchronous ARM MTE exception */
-#define NSIGSEGV	9
+#define SEGV_CPERR	10	/* Control protection fault */
+#define NSIGSEGV	10
 
 /*
  * SIGBUS si_codes
-- 
2.21.0




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux