Re: [PATCH] arm: Enlarge IO_SPACE_LIMIT needed for some SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 11 May 2021 at 14:15, Ansuel Smith <ansuelsmth@xxxxxxxxx> wrote:
>
> On Tue, May 11, 2021 at 06:26:28AM +0200, Ard Biesheuvel wrote:
> > On Tue, 11 May 2021 at 04:32, Ansuel Smith <ansuelsmth@xxxxxxxxx> wrote:
> > >
> > > On Tue, May 11, 2021 at 03:24:29AM +0100, Matthew Wilcox wrote:
> > > > On Tue, May 11, 2021 at 04:16:54AM +0200, Ansuel Smith wrote:
> > > > > Ipq8064 SoC requires larger IO_SPACE_LIMIT on second and third pci port.
> > > >
> > > > Do you really?  I mean, yes, theoretically, I understand it, the
> > > > hardware supports 64kB of I/O port space per root port.  But I/O
> > > > port space is rather deprecated these days.  My laptop has precisely
> > > > two devices with I/O ports, one with 64 bytes and the other with 32
> > > > bytes.  Would you really suffer by allocating 16kB of I/O port
> > > > space to each root port?
> > >
> > > We were talking about this in the other wrong patch. I also think this
> > > much space looks wrong. The current ipq806x dts have this space so it's
> > > actually broken from a long time. The only reason pci worked before was
> > > because the pci driver didn't actually check if the settings were right.
> > > New kernel introduced more checks and this problem showed up. (to be
> > > more precise, the pci port are commonly used by the ath10k wifi and the
> > > second ath10k wifi fails to init because of this problem)
> > > If you can give me any hint on how to check if the space can be reduced
> > > I would be very happy to investigate it.
> > > In the driver I notice that the max buffer is set to 2k, could be this a
> > > hint?
> > >
> >
> > Could you share the output of lspci -vv from such a system?
> >
> > I agree with Matthew that fiddling with the size of the I/O space
> > range probably papers over another problem, and with the odd
> > exception, no PCIe card used on ARM systems actually uses their I/O
> > BARs, even when they have them. (I used to carry a PCIe serial port
> > card to UEFI plugfests because that was the only thing that would stop
> > working if a system configured its I/O resource window incorrectly)
>
> Here is the output of lspci -vv
>
> 0000:00:00.0 PCI bridge: Qualcomm Device 0101 (prog-if 00 [Normal decode])
>         Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
>         I/O behind bridge: [disabled]
>         Memory behind bridge: 08000000-081fffff [size=2M]
>         Prefetchable memory behind bridge: [disabled]

So this a MMIO window to the endpoint

...

>
> 0000:01:00.0 Network controller: Qualcomm Atheros QCA9984 802.11ac Wave 2 Wireless Network Adapter
>         Region 0: Memory at 08000000 (64-bit, non-prefetchable) [size=2M]

... and the endpoint has a single *MMIO* BAR of size 2 MiB.

This has *nothing* to do with port I/O, which is what you are
modifying with your patch.

Did you check that the problem exists without the patch, and that the
patch makes it go away?



>         Capabilities: [40] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] MSI: Enable+ Count=1/32 Maskable+ 64bit+
>                 Address: 000000004361bc88  Data: 0001
>                 Masking: fffffffe  Pending: 00000000
>         Capabilities: [70] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
>                 DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
>                 LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM not supported
>                         ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
>                 LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 5GT/s (ok), Width x1 (ok)
>                         TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
>                          10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
>                          EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
>                          FRS- TPHComp- ExtTPHComp-
>                          AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
>                          AtomicOpsCtl: ReqEn-
>                 LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
>                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
>                          EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
>                          Retimer- 2Retimers- CrosslinkRes: unsupported
>         Capabilities: [100 v2] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
>                 AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
>                         MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>                 HeaderLog: 00000000 00000000 00000000 00000000
>         Capabilities: [148 v1] Device Serial Number 00-00-00-00-00-00-00-00
>         Capabilities: [158 v1] Latency Tolerance Reporting
>                 Max snoop latency: 0ns
>                 Max no snoop latency: 0ns
>         Capabilities: [160 v1] L1 PM Substates
>                 L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- L1_PM_Substates-
>                 L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
>                 L1SubCtl2:
>         Kernel driver in use: ath10k_pci
>
> 0001:00:00.0 PCI bridge: Qualcomm Device 0101 (prog-if 00 [Normal decode])
>         Device tree node: /sys/firmware/devicetree/base/soc/pci@1b700000/bridge@0,0
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 46
>         Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
>         I/O behind bridge: [disabled]
>         Memory behind bridge: 2e000000-2e1fffff [size=2M]
>         Prefetchable memory behind bridge: [disabled]
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Power Management version 3
>                 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000435e8688  Data: 0000
>         Capabilities: [70] Express (v2) Root Port (Slot-), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0
>                         ExtTag- RBE+
>                 DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
>                         ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
>                 LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s (downgraded), Width x1 (downgraded)
>                         TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>                 RootCap: CRSVisible-
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>                 DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP+ LTR-
>                          10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
>                          EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
>                          FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
>                          AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
>                          AtomicOpsCtl: ReqEn- EgressBlck-
>                 LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
>                 LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
>                          EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
>                          Retimer- 2Retimers- CrosslinkRes: unsupported
>         Capabilities: [100 v1] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
>                 AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
>                         MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>                 HeaderLog: 00000000 00000000 00000000 00000000
>                 RootCmd: CERptEn+ NFERptEn+ FERptEn+
>                 RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
>                          FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
>                 ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
>         Kernel driver in use: pcieport
>
> 0001:01:00.0 Network controller: Qualcomm Atheros QCA9984 802.11ac Wave 2 Wireless Network Adapter
>         Subsystem: Qualcomm Atheros Device cafe
>         Device tree node: /sys/firmware/devicetree/base/soc/pci@1b700000/bridge@0,0/wifi@1,0
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 54
>         Region 0: Memory at 2e000000 (64-bit, non-prefetchable) [size=2M]
>         Capabilities: [40] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] MSI: Enable+ Count=1/32 Maskable+ 64bit+
>                 Address: 00000000435e8688  Data: 0001
>                 Masking: fffffffe  Pending: 00000000
>         Capabilities: [70] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
>                 DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
>                 LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM not supported
>                         ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
>                 LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s (downgraded), Width x1 (ok)
>                         TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
>                          10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
>                          EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
>                          FRS- TPHComp- ExtTPHComp-
>                          AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
>                          AtomicOpsCtl: ReqEn-
>                 LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
>                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
>                          EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
>                          Retimer- 2Retimers- CrosslinkRes: unsupported
>         Capabilities: [100 v2] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
>                 AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
>                         MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>                 HeaderLog: 00000000 00000000 00000000 00000000
>         Capabilities: [148 v1] Device Serial Number 00-00-00-00-00-00-00-00
>         Capabilities: [158 v1] Latency Tolerance Reporting
>                 Max snoop latency: 0ns
>                 Max no snoop latency: 0ns
>         Capabilities: [160 v1] L1 PM Substates
>                 L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- L1_PM_Substates-
>                 L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
>                 L1SubCtl2:
>         Kernel driver in use: ath10k_pci



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux