The main issue is that the current documentation talks about the non-existent function pwm_get_last_applied_state. (This was right in the context of https://lore.kernel.org/linux-pwm/20210406073036.26857-1-u.kleine-koenig@xxxxxxxxxxxxxx/ but was then missed to adapt when this patch was reduced to a documentation update.) While at is also clarify "last applied PWM state" to "PWM state that was passed to the last invocation of pwm_apply_state()" to better distinguish to the last actually implemented state and reword to drop a word repetition. Fixes: 539ed98e2bd3 ("pwm: Clarify documentation about pwm_get_state()") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- Hello, the only change compared to v1 is that I didn't use --word-diff to create the patch. I just found out that git am cannot apply patches created with --word-diff. Best regards Uwe Documentation/driver-api/pwm.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/driver-api/pwm.rst b/Documentation/driver-api/pwm.rst index 381f3c46cdac..a7ca4f58305a 100644 --- a/Documentation/driver-api/pwm.rst +++ b/Documentation/driver-api/pwm.rst @@ -55,11 +55,11 @@ several parameter at once. For example, if you see pwm_config() and pwm_{enable,disable}() calls in the same function, this probably means you should switch to pwm_apply_state(). -The PWM user API also allows one to query the last applied PWM state with -pwm_get_last_applied_state(). Note this is different to what the driver has -actually implemented if the request cannot be implemented exactly with the -hardware in use. There is currently no way for consumers to get the actually -implemented settings. +The PWM user API also allows one to query the PWM state that was passed to the +last invocation of pwm_apply_state() using pwm_get_state(). Note this is +different to what the driver has actually implemented if the request cannot be +satisfied exactly with the hardware in use. There is currently no way for +consumers to get the actually implemented settings. In addition to the PWM state, the PWM API also exposes PWM arguments, which are the reference PWM config one should use on this PWM. base-commit: 64d7d074acd52e1bdff621f2cb86c0aae9bcef80 -- 2.30.2
