Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 19, 2021 at 05:07:53PM +0000, Russell King - ARM Linux admin wrote:
> On Thu, Mar 18, 2021 at 05:56:58AM +0100, Christoph Hellwig wrote:
> > footbridge_defconfig enables CONFIG_IDE but no actual host controller
> > driver, so just drop it.
> 
> I have been using the Cypress 82C693 IDE driver on Footbridge for a
> CD ROM drive, and I know it doesn't work with the PATA driver - as
> I need to disable BM DMA, otherwise the 82C693/DC21285 combination
> deadlocks the PCI bus. The PATA driver doesn't support disabling
> BM DMA without disabling it for all PATA ports, which is really
> annoying for my IT821x card in the same machine.
> 
> So, I'm rather stuck using the PATA driver for the HDDs and the
> IDE driver for the CD ROM.
> 
> That said, a commit a while back "cleaning up" the PCI layer appears
> to have totally shafted the 82C693, as the kernel tries to request
> IO resources at the legacy IDE addresses against the PCI bus resource
> which only covers 0x1000-0xffff. Hence, the 82C693 IDE ports are non-
> functional at the moment.
> 
> I'm debating about trying to find a fix to the PCI breakage that was
> introduced by "ARM: move PCI i/o resource setup into common code".
> 
> I hadn't noticed it because I don't use the CD ROM drive very often,
> and I don't upgrade the kernel that often either on the machine -
> but it has been running 24x7 for almost two decades.

Okay, a bit more on this...

If I extend the arch/arm/kernel/bios32.c code to kill BARs 2/3 (which
actually are not present on the CY82C693) then the IDE driver works
for me, but the PATA driver does not:

cy82c693 0000:00:06.1: IDE controller (0x1080:0xc693 rev 0x00)
cy82c693 0000:00:06.1: not 100% native mode: will probe irqs later
legacy IDE will be removed in 2021, please switch to libata
Report any missing HW support to linux-ide@xxxxxxxxxxxxxxx
    ide0: BM-DMA at 0x1080-0x1087
    ide1: BM-DMA at 0x1088-0x108f
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-105, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
...

(unbind Cypress_IDE and try binding pata_cypress)

pata_cypress 0000:00:06.1: no available native port


-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux