On Thu, Feb 18, 2021 at 12:52:49PM +0100, Erik Rosen wrote: > Add hardware monitoring support for ST STPDDC60 Unversal Digital > Multicell Controller. > > Signed-off-by: Erik Rosen <erik.rosen@xxxxxxxxxxxxx> Applied but ... > --- a/drivers/hwmon/pmbus/Makefile > +++ b/drivers/hwmon/pmbus/Makefile > @@ -28,9 +28,11 @@ obj-$(CONFIG_SENSORS_MP2975) += mp2975.o > obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o > obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o > obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o > +obj-$(CONFIG_SENSORS_STPDDC60) += stpddc60.o > obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o > obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o > obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o > obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o > obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o > obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o > + I fixed this up. Please check for such whitespace errors. Thanks, Guenter
