"either" is outside the parentheses, so the matching "or" should be too. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- Documentation/networking/phy.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index 06adfc2afcf02..3f05d50ecd6e9 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -80,8 +80,8 @@ values of phy_interface_t must be understood from the perspective of the PHY device itself, leading to the following: * PHY_INTERFACE_MODE_RGMII: the PHY is not responsible for inserting any - internal delay by itself, it assumes that either the Ethernet MAC (if capable - or the PCB traces) insert the correct 1.5-2ns delay + internal delay by itself, it assumes that either the Ethernet MAC (if capable) + or the PCB traces insert the correct 1.5-2ns delay * PHY_INTERFACE_MODE_RGMII_TXID: the PHY should insert an internal delay for the transmit data lines (TXD[3:0]) processed by the PHY device -- 2.30.1
