[PATCH 4/7] hwmon: (max31790) Show 0 RPM/fault when input disabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When fan speed input is disabled, it makes no sense to show values in
fan*_input and fan*_fault.

Signed-off-by: Václav Kubernát <kubernat@xxxxxxxxx>
---
 drivers/hwmon/max31790.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c
index 74a81e5e3383..fde08c95d942 100644
--- a/drivers/hwmon/max31790.c
+++ b/drivers/hwmon/max31790.c
@@ -219,6 +219,11 @@ static int max31790_read_fan(struct device *dev, u32 attr, int channel,
 
 	switch (attr) {
 	case hwmon_fan_input:
+		if (!(data->fan_config[channel] &
+		      MAX31790_FAN_CFG_TACH_INPUT_EN)) {
+			*val = 0;
+			return 0;
+		}
 		sr = get_tach_period(data->fan_dynamics[channel]);
 		rpm = RPM_FROM_REG(data->tach[channel],
 				   sr,
@@ -233,6 +238,11 @@ static int max31790_read_fan(struct device *dev, u32 attr, int channel,
 		*val = rpm;
 		return 0;
 	case hwmon_fan_fault:
+		if (!(data->fan_config[channel] &
+		      MAX31790_FAN_CFG_TACH_INPUT_EN)) {
+			*val = 0;
+			return 0;
+		}
 		*val = !!(data->fault_status & (1 << channel));
 		return 0;
 	case hwmon_fan_enable:
-- 
2.30.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux